daily pastebin goal
70%
SHARE
TWEET

Untitled

a guest Jul 8th, 2017 21 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. # Example config file /etc/vsftpd.conf
  2. #
  3. # The default compiled in settings are fairly paranoid. This sample file
  4. # loosens things up a bit, to make the ftp daemon more usable.
  5. # Please see vsftpd.conf.5 for all compiled in defaults.
  6. #
  7. # READ THIS: This example file is NOT an exhaustive list of vsftpd options.
  8. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
  9. # capabilities.
  10. #
  11. #
  12. # Run standalone?  vsftpd can run either from an inetd or as a standalone
  13. # daemon started from an initscript.
  14. listen=NO
  15. #
  16. # This directive enables listening on IPv6 sockets. By default, listening
  17. # on the IPv6 "any" address (::) will accept connections from both IPv6
  18. # and IPv4 clients. It is not necessary to listen on *both* IPv4 and IPv6
  19. # sockets. If you want that (perhaps because you want to listen on specific
  20. # addresses) then you must run two copies of vsftpd with two configuration
  21. # files.
  22. listen_ipv6=YES
  23. #
  24. # Allow anonymous FTP? (Disabled by default).
  25. anonymous_enable=NO
  26. #
  27. # Uncomment this to allow local users to log in.
  28. local_enable=YES
  29. #
  30. # Uncomment this to enable any form of FTP write command.
  31. write_enable=YES
  32. #
  33. # Default umask for local users is 077. You may wish to change this to 022,
  34. # if your users expect that (022 is used by most other ftpd's)
  35. #local_umask=022
  36. #
  37. # Uncomment this to allow the anonymous FTP user to upload files. This only
  38. # has an effect if the above global write enable is activated. Also, you will
  39. # obviously need to create a directory writable by the FTP user.
  40. #anon_upload_enable=YES
  41. #
  42. # Uncomment this if you want the anonymous FTP user to be able to create
  43. # new directories.
  44. #anon_mkdir_write_enable=YES
  45. #
  46. # Activate directory messages - messages given to remote users when they
  47. # go into a certain directory.
  48. dirmessage_enable=YES
  49. #
  50. # If enabled, vsftpd will display directory listings with the time
  51. # in  your  local  time  zone.  The default is to display GMT. The
  52. # times returned by the MDTM FTP command are also affected by this
  53. # option.
  54. use_localtime=YES
  55. #
  56. # Activate logging of uploads/downloads.
  57. xferlog_enable=YES
  58. #
  59. # Make sure PORT transfer connections originate from port 20 (ftp-data).
  60. connect_from_port_20=YES
  61. #
  62. # If you want, you can arrange for uploaded anonymous files to be owned by
  63. # a different user. Note! Using "root" for uploaded files is not
  64. # recommended!
  65. #chown_uploads=YES
  66. #chown_username=whoever
  67. #
  68. # You may override where the log file goes if you like. The default is shown
  69. # below.
  70. #xferlog_file=/var/log/vsftpd.log
  71. #
  72. # If you want, you can have your log file in standard ftpd xferlog format.
  73. # Note that the default log file location is /var/log/xferlog in this case.
  74. #xferlog_std_format=YES
  75. #
  76. # You may change the default value for timing out an idle session.
  77. #idle_session_timeout=600
  78. #
  79. # You may change the default value for timing out a data connection.
  80. #data_connection_timeout=120
  81. #
  82. # It is recommended that you define on your system a unique user which the
  83. # ftp server can use as a totally isolated and unprivileged user.
  84. #nopriv_user=ftpsecure
  85. #
  86. # Enable this and the server will recognise asynchronous ABOR requests. Not
  87. # recommended for security (the code is non-trivial). Not enabling it,
  88. # however, may confuse older FTP clients.
  89. #async_abor_enable=YES
  90. #
  91. # By default the server will pretend to allow ASCII mode but in fact ignore
  92. # the request. Turn on the below options to have the server actually do ASCII
  93. # mangling on files when in ASCII mode.
  94. # Beware that on some FTP servers, ASCII support allows a denial of service
  95. # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
  96. # predicted this attack and has always been safe, reporting the size of the
  97. # raw file.
  98. # ASCII mangling is a horrible feature of the protocol.
  99. #ascii_upload_enable=YES
  100. #ascii_download_enable=YES
  101. #
  102. # You may fully customise the login banner string:
  103. #ftpd_banner=Welcome to blah FTP service.
  104. #
  105. # You may specify a file of disallowed anonymous e-mail addresses. Apparently
  106. # useful for combatting certain DoS attacks.
  107. #deny_email_enable=YES
  108. # (default follows)
  109. #banned_email_file=/etc/vsftpd.banned_emails
  110. #
  111. # You may restrict local users to their home directories.  See the FAQ for
  112. # the possible risks in this before using chroot_local_user or
  113. # chroot_list_enable below.
  114. #chroot_local_user=YES
  115. #
  116. # You may specify an explicit list of local users to chroot() to their home
  117. # directory. If chroot_local_user is YES, then this list becomes a list of
  118. # users to NOT chroot().
  119. # (Warning! chroot'ing can be very dangerous. If using chroot, make sure that
  120. # the user does not have write access to the top level directory within the
  121. # chroot)
  122. #chroot_local_user=YES
  123. #chroot_list_enable=YES
  124. # (default follows)
  125. #chroot_list_file=/etc/vsftpd.chroot_list
  126. #
  127. # You may activate the "-R" option to the builtin ls. This is disabled by
  128. # default to avoid remote users being able to cause excessive I/O on large
  129. # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
  130. # the presence of the "-R" option, so there is a strong case for enabling it.
  131. #ls_recurse_enable=YES
  132. #
  133. # Customization
  134. #
  135. # Some of vsftpd's settings don't fit the filesystem layout by
  136. # default.
  137. #
  138. # This option should be the name of a directory which is empty.  Also, the
  139. # directory should not be writable by the ftp user. This directory is used
  140. # as a secure chroot() jail at times vsftpd does not require filesystem
  141. # access.
  142. secure_chroot_dir=/var/run/vsftpd/empty
  143. #
  144. # This string is the name of the PAM service vsftpd will use.
  145. pam_service_name=vsftpd
  146. #
  147. # This option specifies the location of the RSA certificate to use for SSL
  148. # encrypted connections.
  149. rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
  150. rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
  151. ssl_enable=NO
  152.  
  153. #
  154. # Uncomment this to indicate that vsftpd use a utf8 filesystem.
  155. #utf8_filesystem=YES
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top