API tools faq
paste
Advertisement
z3ntu

los 16.0 charger #1

z3ntu
Apr 10th, 2019
224
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 62.70 KB | None | 0 0
raw download clone embed print report
  1. Format: Log Type - Time(microsec) - Message
  2. Log type: B - since boot(excluding boot rom). D - delta
  3. B - 143929 - SBL1, Start
  4. B - 149175 - scatterload_region && ram_init, Start
  5. D - 0 - scatterload_region && ram_init, Delta
  6. B - 166164 - pm_device_init, Start
  7. D - 27358 - pm_device_init, Delta
  8. B - 193614 - boot_flash_init, Start
  9. D - 11864 - boot_flash_init, Delta
  10. B - 205875 - boot_config_data_table_init, Start
  11. D - 134932 - boot_config_data_table_init, Delta
  12. B - 342362 - sbl1_ddr_set_params, Start
  13. B - 344863 - Pre_DDR_clock_init, Start
  14. D - 274 - Pre_DDR_clock_init, Delta
  15. D - 0 - sbl1_ddr_set_params, Delta
  16. B - 356362 - Detected Samsung SDRAM, Start
  17. B - 360388 - Detected Samsung SDRAM, Start
  18. B - 365695 - pm_driver_init, Start
  19. D - 27175 - pm_driver_init, Delta
  20. B - 394243 - clock_init, Start
  21. D - 183 - clock_init, Delta
  22. B - 397354 - Image Load, Start
  23. B - 419070 - Tz Execution, Start
  24. D - 184982 - Tz Execution, Delta
  25. B - 612135 - Image Load, Start
  26. B - 622261 - Signal PBL to Jump to RPM FW
  27. B - 622535 - sbl1_wait_for_ddr_training, Start
  28. D - 31933 - sbl1_wait_for_ddr_training, Delta
  29. B - 658708 - Image Load, Start
  30. B - 659684 - WDT Execution, Start
  31. D - 213 - WDT Execution, Delta
  32. B - 664259 - Image Load, Start
  33. B - 685426 - sbl1_efs_handle_cookies, Start
  34. D - 152 - sbl1_efs_handle_cookies, Delta
  35. B - 687409 - RPM sync cookie updated
  36. B - 691008 - SBL1, End
  37. Android Bootloader - UART_DM Initialized!!!
  38. [0] welcome to lk
  39.  
  40. [10] platform_init()
  41. [10] target_init()
  42. [70] Done initialization of the card
  43. [90] Not able to search the panel:
  44. [130] MDP GDSC already enabled
  45. [180] Config MIPI_VIDEO_PANEL.
  46. [190] dsi panel init error
  47. [190] Turn off MIPI_VIDEO_PANEL.
  48. [260] Not able to search the panel:
  49. [300] MDP GDSC already enabled
  50. [360] Config MIPI_VIDEO_PANEL.
  51. [360] dsi panel init error
  52. [360] Turn off MIPI_VIDEO_PANEL.
  53. [430] Not able to search the panel:
  54. [510] MDP GDSC already enabled
  55. [560] Config MIPI_CMD_PANEL.
  56. [820] Turn on MIPI_CMD_PANEL.
  57. [870] partition misc doesn't exist
  58. [870] error in emmc_recovery_init
  59. [880] Unable to locate /bootselect partition
  60. [880] No 'misc' partition found
  61. [880] Error reading MISC partition
  62. [890] failed to get ffbm cookie[890] use_signed_kernel=1, is_unlocked=1, is_tampered=0.
  63. [900] Loading boot image (7917568): start
  64. [950] Loading boot image (7917568): done
  65. [950] Using DTB entry 217/00010000/8/0 for device 217/00010001/8/0
  66. [1830] aboot_save_boot_hash_mmc: imagesize_actual size 8144896 bytes.
  67. [1840] cmdline: androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x3b7 ehci-hcd.park=3 androidboot.bootdevice=msm_sdcc.1 console=ttyHSL0,115200,n8 buildvariant=userdebug androidboot.emmc=true androidboot.serialno=fd25f685 androidboot.mode=charger androidbo[1860] Updating device tree: start
  68. [1880] Updating device tree: done
  69. [1880] Turn off MIPI_CMD_PANEL.
  70. [1880] Continuous splash enabled, keeping panel alive.
  71. [1890] booting linux @ 0x8000, ramdisk @ 0x2000000 (1714631), tags/device tree @ 0x1e00000
  72. Booting Linux on physical CPU 0
  73. Initializing cgroup subsys cpu
  74. Linux version 3.4.0-perf-g854edbd-dirty (root@arch-tower) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Apr 10 07:56:19 UTC 2019
  75. CPU: ARMv7 Processor [512f06f1] revision 1 (ARMv7), cr=10c5387d
  76. CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  77. Machine: Qualcomm MSM 8974 (Flattened Device Tree), model: Qualcomm MSM 8974Pro-AA/AB MTP
  78. qcom,ion-heap@28 reserved EBI1 size 614000
  79. Node qcom,mdss_fb_primary memblock_reserve memory 3200000-5000000
  80. qcom,msm-contig-mem reserved EBI1 size 280000
  81. Node qcom,msm-mem-hole removed memory 5a00000-d200000
  82. Node qcom,msm-mem-hole removed memory fa00000-ff00000
  83. memory pool 3 (start 0x7f700000 size 900000) initialized
  84. cma: CMA: reserved 16 MiB at 36400000
  85. cma: Found secure_region, memory base 0, size 252 MiB, limit 0xffffffff
  86. cma: CMA: reserved 252 MiB at 6f800000
  87. cma: Found adsp_region, memory base 0, size 65 MiB, limit 0xffffffff
  88. cma: CMA: reserved 68 MiB at 6b400000
  89. cma: Found qsecom_region, memory base 0, size 17 MiB, limit 0xffffffff
  90. cma: CMA: reserved 20 MiB at 6a000000
  91. Memory policy: ECC disabled, Data cache writealloc
  92. IMEM DT static mapping successful
  93. Initialized persistent memory from 0ff00000-0ff1ffff
  94. Reserve memory base (0xff00000); size (0x20000)
  95.  
  96. PERCPU: Embedded 9 pages/cpu @c5000000 s16064 r8192 d12608 u36864
  97. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 485888
  98. Kernel command line: androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x3b7 ehci-hcd.park=3 androidboot.bootdevice=msm_sdcc.1 console=ttyHSL0,115200,n8 buildvariant=userdebug androidboot.emmc=true androidboot.serialno=fd25f685 androidboot.mode=charger androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_otm1902b_1080p_cmd
  99. PID hash table entries: 4096 (order: 2, 16384 bytes)
  100. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  101. Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  102. Memory:
  103. 90MB
  104. 40MB
  105. 1784MB
  106. = 1914MB total
  107. Memory: 1521796k/1521796k available, 447356k reserved, 833536K highmem
  108. Virtual kernel memory layout:
  109. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  110. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  111. vmalloc : 0xf7800000 - 0xff000000 ( 120 MB)
  112. lowmem : 0xcff00000 - 0xf7500000 ( 630 MB)
  113. vmalloc : 0xcfa00000 - 0xcff00000 ( 5 MB)
  114. lowmem : 0xcd200000 - 0xcfa00000 ( 40 MB)
  115. vmalloc : 0xc5a00000 - 0xcd200000 ( 120 MB)
  116. lowmem : 0xc0000000 - 0xc5a00000 ( 90 MB)
  117. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  118. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  119. .text : 0xc0008000 - 0xc120b968 (18447 kB)
  120. .init : 0xc1300000 - 0xc1460ec0 (1412 kB)
  121. .data : 0xc1462000 - 0xc1525568 ( 782 kB)
  122. .bss : 0xc158ba14 - 0xc1873390 (2975 kB)
  123. SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  124. Preemptible hierarchical RCU implementation.
  125. RCU dyntick-idle grace-period acceleration is enabled.
  126. NR_IRQS:16 nr_irqs:16 16
  127. sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
  128. Switching to timer-based delay loop
  129. Console: colour dummy device 80x30
  130. kmemleak: Kernel memory leak detector disabled
  131. Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  132. pid_max: default: 32768 minimum: 301
  133. Security Framework initialized
  134. SELinux: Initializing.
  135. Mount-cache hash table entries: 512
  136. Initializing cgroup subsys debug
  137. Initializing cgroup subsys cpuacct
  138. Initializing cgroup subsys freezer
  139. Initializing cgroup subsys bfqio
  140. CPU: Testing write buffer coherency:
  141. ok
  142. CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  143. hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
  144. Setting up static identity map for 0xc5f968 - 0xc5f9f0
  145. Configuring XPU violations to be fatal errors
  146. MSM Memory Dump table set up
  147. CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  148. CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  149. CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  150. Brought up 4 CPUs
  151. SMP: Total of 4 processors activated (153.60 BogoMIPS).
  152. VFP support v0.3:
  153. implementor 51 architecture 64 part 6f variant 2 rev 1
  154. dummy:
  155. NET: Registered protocol family 16
  156. DMA: preallocated 256 KiB pool for atomic coherent allocations
  157. KPI: Bootloader start count = 622545374
  158. KPI: Bootloader end count = 2736472616
  159. KPI: Bootloader display count = 2422359180
  160. KPI: Bootloader load kernel count = 2420124142
  161. KPI: Kernel MPM timestamp = 192884
  162. KPI: Kernel MPM Clock frequency = 32768
  163. socinfo_print: v9, id=217, ver=1.1, raw_id=1980, raw_ver=1 ,hw_plat=8, hw_plat_ver=65536
  164. accessory_chip=0,hw_plat_subtype=0, pmic_model=65537, pmic_die_revision=196609,foundry_id=1
  165. msm_8974_init_gpiomux:1456 socinfo_get_version 10001
  166. gpiochip_add: registered GPIOs 0 to 145 on device: msmgpio
  167. persistent_ram_buffer_init(): ram->num_descs = 1
  168.  
  169. persistent_ram_buffer_init(): desc->name = qcom,ram-console.40 ; name = qcom,ram-console.40
  170.  
  171. persistent_ram: error in header, 3
  172. persistent_ram: no valid data in buffer (sig = 0x00000000)
  173. console [ram-1] enabled
  174. msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
  175. 8841_s1: 675 <--> 1050 mV at 0 mV normal idle
  176. 8841_s1_ao: 675 <--> 1050 mV at 0 mV normal idle
  177. 8841_s1_so: 675 <--> 1050 mV at 675 mV normal idle
  178. 8841_s2: 500 <--> 1050 mV at 0 mV normal idle
  179. 8841_s2_corner: 0 <--> 0 mV at 0 mV normal idle
  180. 8841_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
  181. 8841_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle
  182. 8841_s3: 1050 mV normal idle
  183. 8841_s4: 815 <--> 900 mV at 0 mV normal idle
  184. 8841_s4_corner: 0 <--> 0 mV at 0 mV normal idle
  185. 8841_s4_floor_corner: 0 <--> 0 mV at 0 mV normal idle
  186. 8941_s1: 1300 mV normal idle
  187. 8941_s2: 2150 mV normal idle
  188. 8941_s3: 1800 mV normal idle
  189. 8941_l1: 1225 mV normal idle
  190. 8941_l2: 1200 mV normal idle
  191. 8941_l3: 1225 mV normal idle
  192. 8941_l4: 1225 mV normal idle
  193. 8941_l5: 1800 mV normal idle
  194. 8941_l6: 1800 mV normal idle
  195. 8941_l7: 1800 mV normal idle
  196. 8941_l8: 1800 mV normal idle
  197. 8941_l9: 1800 <--> 2950 mV at 2950 mV normal idle
  198. 8941_l10: 1800 <--> 2950 mV at 2950 mV normal idle
  199. 8941_l11: 1225 <--> 1350 mV at 1300 mV normal idle
  200. 8941_l12: 1800 mV normal idle
  201. 8941_l12_ao: 1800 mV normal idle
  202. 8941_l13: 1800 <--> 2950 mV at 2950 mV normal idle
  203. 8941_l14: 1800 mV normal idle
  204. 8941_l15: 2050 mV normal idle
  205. 8941_l16: 2700 mV normal idle
  206. 8941_l17: 2850 <--> 3000 mV at 2850 mV normal idle
  207. 8941_l18: 2850 mV normal idle
  208. 8941_l19: 2900 <--> 3350 mV at 2900 mV normal idle
  209. 8941_l20: 2950 mV normal idle
  210. 8941_l21: 2950 mV normal idle
  211. 8941_l22: 3000 mV normal idle
  212. 8941_l23: 3000 mV normal idle
  213. 8941_l24: 3075 mV normal idle
  214. 8941_lvs1:
  215. 8941_lvs2:
  216. 8941_lvs3:
  217. PDN krait_pdn_phase_scaling_init: eFuse phase scaling factor = 4/4 (eFuse not blown)
  218. PDN krait_pdn_phase_scaling_init: initial phase scaling factor = 4/4
  219. krait0: 500 <--> 1100 mV at 900 mV fast normal idle
  220. krait1: 500 <--> 1100 mV at 900 mV fast normal idle
  221. krait2: 500 <--> 1100 mV at 900 mV fast normal idle
  222. krait3: 500 <--> 1100 mV at 900 mV fast normal idle
  223. msm-thermal qcom,msm-thermal.73: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
  224. msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
  225. msm-thermal qcom,msm-thermal.73: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qti,pmic-opt-curr-temp. KTM continues
  226. msm-thermal qcom,msm-thermal.73: probe_thermal_efuse_read:Failed reading node=/soc/qcom,msm-thermal, key=qcom,efuse-data. KTM continues
  227. msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
  228. hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  229. hw-breakpoint: maximum watchpoint size is 8 bytes.
  230. 8941_boost: 5000 mV
  231. 8941_mvs1:
  232. qcom,qpnp-regulator qpnp-regulator-22: Failed to find supply parent
  233. spmi qpnp-regulator-22: Driver qcom,qpnp-regulator requests probe deferral
  234. 8941_mvs2:
  235. 8941_mvs2: supplied by 8941_boost
  236. kworker/u:1 used greatest stack depth: 6196 bytes left
  237. sps:BAM 0xf9984000 (va:0xc5ac0000) enabled: ver:0x6, number of pipes:20
  238. sps:BAM 0xf9984000 is registered.
  239. sps:sps is ready.
  240. spmi qpnp-bsi-8: Driver qcom,qpnp-bsi requests probe deferral
  241. gdsc_venus:
  242. gdsc_mdss:
  243. gdsc_jpeg:
  244. gdsc_vfe:
  245. gdsc_oxili_gx:
  246. gdsc_oxili_gx: supplied by 8841_s4_corner
  247. gdsc_oxili_cx:
  248. gdsc_usb_hsic:
  249. AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  250. msm_ocmem fdd00000.qcom,ocmem: OCMEM Virtual addr c5e00000
  251. Physical OCMEM zone layout:
  252. zone graphics : 0xfec00000 - 0xfecfffff (1024 KB)
  253. zone lp_audio : 0xfed00000 - 0xfed7ffff ( 512 KB)
  254. zone video : 0xfed00000 - 0xfed7ffff ( 512 KB)
  255. bio: create slab <bio-0> at 0
  256. platform spi_eth_phy_vreg.83: Driver reg-fixed-voltage requests probe deferral
  257. cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
  258. ION-heap mm: Cannot specify alignment for this type of heap
  259. cma: Assigned CMA region at 0 to 16.qcom,ion-heap device
  260. ION-heap adsp: Cannot specify alignment for this type of heap
  261. cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
  262. ION heap system created
  263. ion_heap_create: Heap type is disabled: 1
  264. msm_ion_heap_create: error creating heap kmalloc type 1 base 0x00000000 size 0
  265. ION heap mm created at 0x6f800000 with size fc00000
  266. ION heap adsp created at 0x6b400000 with size 4100000
  267. ION heap qsecom created at 0x6a000000 with size 1100000
  268. ION heap audio created at 0x7f700000 with size 614000
  269. ION heap pil_1 created at 0x05a00000 with size 2100000
  270. ION heap pil_2 created at 0x08000000 with size 5100000
  271. SCSI subsystem initialized
  272. usbcore: registered new interface driver usbfs
  273. usbcore: registered new interface driver hub
  274. usbcore: registered new device driver usb
  275. Linux media interface: v0.10
  276. Linux video capture interface: v2.00
  277. msm_iommu_v1 fda64000.qcom,iommu: device jpeg_iommu mapped at c5b60000, with 3 ctx banks
  278. msm_iommu_v1 fd928000.qcom,iommu: device mdp_iommu mapped at c5be0000, with 3 ctx banks
  279. msm_iommu_v1 fdc84000.qcom,iommu: device venus_iommu mapped at c5c80000, with 5 ctx banks
  280. msm_iommu_v1 fdb10000.qcom,iommu: device kgsl_iommu mapped at c5ca0000, with 3 ctx banks
  281. msm_iommu_v1 fda44000.qcom,iommu: device vfe_iommu mapped at c5cc0000, with 3 ctx banks
  282. msm_iommu_ctx_v1 fda6c000.qcom,iommu-ctx: context jpeg_enc0 using bank 0
  283. msm_iommu_ctx_v1 fda6d000.qcom,iommu-ctx: context jpeg_enc1 using bank 1
  284. msm_iommu_ctx_v1 fda6e000.qcom,iommu-ctx: context jpeg_dec using bank 2
  285. msm_iommu_ctx_v1 fd930000.qcom,iommu-ctx: context mdp_0 using bank 0
  286. msm_iommu_ctx_v1 fd931000.qcom,iommu-ctx: context mdp_1 using bank 1
  287. msm_iommu_ctx_v1 fd932000.qcom,iommu-ctx: context mdp_2 using bank 2
  288. msm_iommu_ctx_v1 fdc8c000.qcom,iommu-ctx: context venus_ns using bank 0
  289. msm_iommu_ctx_v1 fdc8d000.qcom,iommu-ctx: context venus_sec_bitstream using bank 1
  290. msm_iommu_ctx_v1 fdc8e000.qcom,iommu-ctx: context venus_fw using bank 2
  291. msm_iommu_ctx_v1 fdc8f000.qcom,iommu-ctx: context venus_sec_pixel using bank 3
  292. msm_iommu_ctx_v1 fdc90000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
  293. msm_iommu_ctx_v1 fdb18000.qcom,iommu-ctx: context gfx3d_user using bank 0
  294. msm_iommu_ctx_v1 fdb19000.qcom,iommu-ctx: context gfx3d_priv using bank 1
  295. msm_iommu_ctx_v1 fdb1a000.qcom,iommu-ctx: context gfx3d_spare using bank 2
  296. msm_iommu_ctx_v1 fda4c000.qcom,iommu-ctx: context vfe0 using bank 0
  297. msm_iommu_ctx_v1 fda4d000.qcom,iommu-ctx: context vfe1 using bank 1
  298. msm_iommu_ctx_v1 fda4e000.qcom,iommu-ctx: context cpp using bank 2
  299. Advanced Linux Sound Architecture Driver Version 1.0.25.
  300. Bluetooth: Core ver 2.16
  301. NET: Registered protocol family 31
  302. Bluetooth: HCI device and connection manager initialized
  303. Bluetooth: HCI socket layer initialized
  304. Bluetooth: L2CAP socket layer initialized
  305. Bluetooth: SCO socket layer initialized
  306. cfg80211: Calling CRDA to update world regulatory domain
  307. cfg80211: World regulatory domain updated:
  308. cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  309. cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  310. cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  311. cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  312. cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  313. cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  314. cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  315. cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  316. cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
  317. Switching to clocksource arch_sys_counter
  318. NET: Registered protocol family 2
  319. IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  320. TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  321. TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
  322. TCP: Hash tables configured (established 131072 bind 65536)
  323. TCP: reno registered
  324. UDP hash table entries: 512 (order: 2, 24576 bytes)
  325. UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
  326. NET: Registered protocol family 1
  327. Trying to unpack rootfs image as initramfs...
  328. msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
  329. Freeing initrd memory: 1672K
  330. Detected 9 counters on the L2CC PMU.
  331. gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
  332. gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
  333. gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
  334. gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
  335. gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
  336. gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
  337. gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
  338. gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
  339. gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
  340. gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
  341. gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
  342. gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
  343. gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
  344. gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
  345. gpiochip_add: registered GPIOs 544 to 575 on device: rdbg
  346. gpiochip_add: registered GPIOs 512 to 543 on device: rdbg
  347. gpiochip_add: registered GPIOs 480 to 511 on device: rdbg
  348. gpiochip_add: registered GPIOs 448 to 479 on device: rdbg
  349. pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
  350. pil_pronto fb21b000.qcom,pronto: using secure boot
  351. pil_venus fdce0000.qcom,venus: using secure boot
  352. NET: Registered protocol family 27
  353. clock-krait-8974 f9016000.qcom,clock-krait: PVS config version: 1
  354. clock-krait-8974 f9016000.qcom,clock-krait: Speed bin: 1
  355. clock-krait-8974 f9016000.qcom,clock-krait: PVS bin: 10
  356. clock-krait-8974 f9016000.qcom,clock-krait: PVS version: 1
  357. L2 @ 729600 KHz
  358. CPU0 @ 960000 KHz
  359. CPU1 @ unknown rate. Forcing new rate.
  360. CPU1 @ 300000 KHz
  361. CPU2 @ unknown rate. Forcing new rate.
  362. CPU2 @ 300000 KHz
  363. CPU3 @ unknown rate. Forcing new rate.
  364. CPU3 @ 300000 KHz
  365. msm_rpm_log_probe: OK
  366. msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
  367. msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
  368. mpm_counter: [ 1.097040]:(225239)
  369. audit: initializing netlink socket (disabled)
  370. type=2000 audit(1.090:1): initialized
  371. highmem bounce pool size: 64 pages
  372. VFS: Disk quotas dquot_6.5.2
  373. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  374. Registering sdcardfs 0.1
  375. fuse init (API version 7.18)
  376. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  377. io scheduler noop registered
  378. io scheduler deadline registered
  379. io scheduler row registered
  380. io scheduler cfq registered (default)
  381. io scheduler test-iosched registered
  382. io scheduler bfq registered
  383. BFQ I/O-scheduler: v7r8
  384. gpiochip_add: registered GPIOs 444 to 447 on device: pm8841-mpp
  385. gpiochip_add: registered GPIOs 408 to 443 on device: pm8941-gpio
  386. gpiochip_add: registered GPIOs 401 to 407 on device: pm8941-mpp
  387. mdss_mdp_probe: MDP HW Base phy_Address=0xfd900000 virt=0xc5d00000
  388. mdss_mdp_probe: MDSS VBIF HW Base phy_Address=0xfd924000 virt=0xc5bf4000
  389. mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-clk-levels : spec error in device tree
  390. mdss_mdp_parse_bootarg: mdss_mdp_parse_bootarg:1541: pan_name=[1:dsi:0:qcom,mdss_dsi_otm1902b_1080p_cmd] end=[oc]
  391. mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
  392. mdss_dsi_panel_init: Panel Name = otm1902b 1080p cmd mode dsi panel
  393. mdss_panel_parse_dt: Panel ID = 1
  394. mdss_dsi_parse_roi_alignment: Panel roi alignment not found
  395. mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
  396. mdss_dsi_parse_panel_features:842 Partial update disabled
  397. mdss_dsi_parse_panel_features: ulps feature disabled
  398. mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
  399. mdss_dsi_panel_init: Continuous splash enabled
  400. mdss_dsi_retrieve_ctrl_resources: ctrl_base=c5bf6800 ctrl_size=1f8 phy_base=c5bfeb00 phy_size=2b0
  401. dsi_panel_device_register: Using default BTA for ESD check
  402. mdss_register_panel: adding framebuffer device fd922800.qcom,mdss_dsi
  403. mdss_hw_init: MDP Rev=10020001
  404. mdss_dsi_status_init: DSI status check interval:5000
  405. mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.5
  406. mdss_fb_parse_dt: split framebuffer left=0 right=0
  407. mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
  408. mdss_mdp_pp_resume: Failed to get AD info, err = -112
  409. mdss_fb_parse_dt: split framebuffer left=0 right=0
  410. mdss_fb_register: FrameBuffer[1] 1920x1080 registered successfully!
  411. sps: BAM device 0xf9944000 is not registered yet.
  412. sps:BAM 0xf9944000 is registered.
  413. msm_thermal:do_freq_control Limiting CPU0 max frequency to 1728000. Temp:66
  414. msm_thermal:do_freq_control Limiting CPU1 max frequency to 1728000. Temp:66
  415. msm_thermal:do_freq_control Limiting CPU2 max frequency to 1728000. Temp:66
  416. msm_thermal:do_freq_control Limiting CPU3 max frequency to 1728000. Temp:66
  417. f995d000.uart: ttyHS0 at MMIO 0xf995d000 (irq = 145) is a MSM HS UART
  418. msm_serial_hsl_probe: detected port #0 (ttyHSL0)
  419. f991e000.serial: ttyHSL0 at MMIO 0xf991e000 (irq = 140) is a MSM
  420. msm_hsl_console_setup: console setup on port #0
  421. msm_thermal:do_freq_control Limiting CPU0 max frequency to 1497600. Temp:63
  422. msm_thermal:do_freq_control Limiting CPU1 max frequency to 1497600. Temp:63
  423. msm_thermal:do_freq_control Limiting CPU2 max frequency to 1497600. Temp:63
  424. msm_thermal:do_freq_control Limiting CPU3 max frequency to 1497600. Temp:63
  425. msm_thermal:do_freq_control Limiting CPU0 max frequency to 1190400. Temp:62
  426. msm_thermal:do_freq_control Limiting CPU1 max frequency to 1190400. Temp:62
  427. msm_thermal:do_freq_control Limiting CPU2 max frequency to 1190400. Temp:62
  428. msm_thermal:do_freq_control Limiting CPU3 max frequency to 1190400. Temp:62
  429. msm_thermal:do_freq_control Limiting CPU0 max frequency to 960000. Temp:61
  430. msm_thermal:do_freq_control Limiting CPU1 max frequency to 960000. Temp:61
  431. msm_thermal:do_freq_control Limiting CPU2 max frequency to 960000. Temp:61
  432. msm_thermal:do_freq_control Limiting CPU3 max frequency to 960000. Temp:61
  433. msm_thermal:do_freq_control Limiting CPU0 max frequency to 729600. Temp:61
  434. msm_thermal:do_freq_control Limiting CPU1 max frequency to 729600. Temp:61
  435. msm_thermal:do_freq_control Limiting CPU2 max frequency to 729600. Temp:61
  436. msm_thermal:do_freq_control Limiting CPU3 max frequency to 729600. Temp:61
  437. msm_thermal:do_freq_control Limiting CPU0 max frequency to 422400. Temp:60
  438. msm_thermal:do_freq_control Limiting CPU1 max frequency to 422400. Temp:60
  439. msm_thermal:do_freq_control Limiting CPU2 max frequency to 422400. Temp:60
  440. msm_thermal:do_freq_control Limiting CPU3 max frequency to 422400. Temp:60
  441. console [ttyHSL0] enabled
  442. msm_serial_hsl_init: driver initialized
  443. diagchar initialized now
  444. kgsl: adreno_of_read_property: Unable to read 'qcom,pm-qos-latency'
  445. kgsl bus ib [0] = 2456000000
  446. kgsl bus ib [1] = 3680000000
  447. kgsl bus ib [2] = 4912000000
  448. kgsl bus ib [3] = 7464000000
  449. kgsl bus index is 3 for pwrlevel 0
  450. kgsl bus index is 2 for pwrlevel 1
  451. kgsl bus index is 2 for pwrlevel 2
  452. kgsl bus index is 1 for pwrlevel 3
  453. kgsl bus index is 0 for pwrlevel 4
  454. kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
  455. kgsl: num bus is 4
  456. brd: module loaded
  457. loop: module loaded
  458. isa1200 0-0048: isa1200_probe: gpio is not used/Invalid -22
  459. qup_i2c f9967000.i2c: QUP: I2C status flags :0x81321d0, irq:137
  460. isa1200 0-0048: isa1200_write_reg: err -135471568
  461. isa1200_setup: i2c write failure
  462. isa1200 0-0048: isa1200_probe: setup fail -135471568
  463. isa1200: probe of 0-0048 failed with error -135471568
  464. i2c-core: driver [isa1200] using legacy suspend method
  465. i2c-core: driver [isa1200] using legacy resume method
  466. QSEECOM: qseecom_probe: support_bus_scaling=0x1
  467. QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
  468. QSEECOM: qseecom_probe: file-encrypt-pipe-pair=0x0
  469. QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x1
  470. QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
  471. QSEECOM: qseecom_probe: qseecom.appsbl_qseecom_support = 0x0
  472. QSEECOM: qseecom_probe: secure app region addr=0x7b00000 size=0x500000
  473. ti_drv2603 probe
  474. i2c-core: driver [tabla-i2c-core] using legacy suspend method
  475. i2c-core: driver [tabla-i2c-core] using legacy resume method
  476. i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
  477. i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
  478. SCSI Media Changer driver v0.25
  479. sps:BAM 0xf9944000 (va:0xc5ce0000) enabled: ver:0x13, number of pipes:24
  480. sps: BAM device 0xf9904000 is not registered yet.
  481. sps:BAM 0xf9904000 is registered.
  482. sps:BAM 0xf9904000 (va:0xc5da0000) enabled: ver:0x13, number of pipes:24
  483. tun: Universal TUN/TAP device driver, 1.6
  484. tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  485. rmnet_init: BAM devices[9]
  486. PPP generic driver version 2.4.2
  487. PPP BSD Compression module registered
  488. PPP Deflate Compression module registered
  489. PPP MPPE Compression module registered
  490. NET: Registered protocol family 24
  491. SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  492. CSLIP: code copyright 1989 Regents of the University of California.
  493. wcnss_wlan probed in built-in mode
  494. usbcore: registered new interface driver asix
  495. usbcore: registered new interface driver cdc_ether
  496. usbcore: registered new interface driver net1080
  497. usbcore: registered new interface driver cdc_subset
  498. usbcore: registered new interface driver zaurus
  499. usbcore: registered new interface driver cdc_ncm
  500. usbcore: registered new interface driver cdc_acm
  501. cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  502. usbcore: registered new interface driver ccid_bridge
  503. ccid_bridge_init: success
  504. Initializing USB Mass Storage driver...
  505. usbcore: registered new interface driver usb-storage
  506. USB Mass Storage support registered.
  507. usbcore: registered new interface driver ums-alauda
  508. usbcore: registered new interface driver ums-cypress
  509. usbcore: registered new interface driver ums-datafab
  510. usbcore: registered new interface driver ums_eneub6250
  511. usbcore: registered new interface driver ums-freecom
  512. usbcore: registered new interface driver ums-isd200
  513. usbcore: registered new interface driver ums-jumpshot
  514. usbcore: registered new interface driver ums-karma
  515. usbcore: registered new interface driver ums-onetouch
  516. usbcore: registered new interface driver ums-sddr09
  517. usbcore: registered new interface driver ums-sddr55
  518. usbcore: registered new interface driver ums-usbat
  519. file system registered
  520. mbim_init: initialize 1 instances
  521. mbim_init: Initialized 1 ports
  522. rndis_qc_init: initialize rndis QC instance
  523. gadget: Mass Storage Function, version: 2009/09/11
  524. gadget: Number of LUNs=1
  525. lun0: LUN: removable file: (no medium)
  526. gadget: android_usb ready
  527. mousedev: PS/2 mouse device common for all mice
  528. usbcore: registered new interface driver xpad
  529. usbcore: registered new interface driver usb_acecad
  530. usbcore: registered new interface driver aiptek
  531. usbcore: registered new interface driver gtco
  532. usbcore: registered new interface driver hanwang
  533. usbcore: registered new interface driver kbtab
  534. usbcore: registered new interface driver wacom
  535. synaptics_dsx_i2c 2-0020: synaptics_rmi4_f1a_button_map: Button map is missing in board file
  536. input: synaptics_dsx as /devices/f9924000.i2c/i2c-2/2-0020/input/input0
  537. qcom,qpnp-rtc qpnp-rtc-17: rtc core: registered qpnp_rtc as rtc0
  538. i2c /dev entries driver
  539. platform qcom,camera-led-flash.84: Driver camera-led-flash requests probe deferral
  540. msm_eeprom_platform_probe MM data miss:1017
  541. msm_eeprom_parse_memory_map: pageen not needed
  542. msm_eeprom_parse_memory_map: pageen not needed
  543. msm_eeprom_parse_memory_map: pageen not needed
  544. fp_cam_module_set: Camera module detected: 1 (sunny_q8v18a)
  545. msm_eeprom_platform_probe MM data miss:1017
  546. msm_eeprom_parse_memory_map: pageen not needed
  547. msm_cci_irq:876 MASTER_0 error 10000000
  548. msm_cci_i2c_read:445 read_words = 0, exp words = 4
  549. msm_cci_i2c_read_bytes:523 failed rc -22
  550. read_eeprom_memory: read failed
  551. msm_eeprom_platform_probe read_eeprom_memory failed
  552. qcom,eeprom: probe of a0.qcom,eeprom failed with error -22
  553. g_sctrl[0] f4d46c00
  554. g_sctrl[1] f4d47200
  555. g_sctrl[2] f4d47400
  556. __msm_jpeg_init:951] Jpeg Device id 0
  557. __msm_jpeg_init:951] Jpeg Device id 1
  558. __msm_jpeg_init:951] Jpeg Device id 2
  559. lirc_dev: IR Remote Control driver registered, major 232
  560. IR NEC protocol handler initialized
  561. IR RC5(x) protocol handler initialized
  562. IR RC6 protocol handler initialized
  563. IR JVC protocol handler initialized
  564. IR Sony protocol handler initialized
  565. IR RC5 (streamzap) protocol handler initialized
  566. IR SANYO protocol handler initialized
  567. IR MCE Keyboard/mouse protocol handler initialized
  568. IR LIRC bridge handler initialized
  569. usbcore: registered new interface driver uvcvideo
  570. USB Video Class driver (1.1.1)
  571. BMS: qpnp_bms_init: QPNP BMS INIT
  572. spmi qpnp-bms-10: Driver qcom,qpnp-bms requests probe deferral
  573. spmi qpnp-charger-14: Driver qcom,qpnp-charger requests probe deferral
  574. device-mapper: uevent: version 1.0.3
  575. device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  576. device-mapper: req-crypt: dm-req-crypt successfully initalized.
  577.  
  578. Bluetooth: HCI UART driver ver 2.2
  579. Bluetooth: HCIATH3K protocol initialized
  580. cpuidle: using governor ladder
  581. cpuidle: using governor menu
  582. sdhci: Secure Digital Host Controller Interface driver
  583. sdhci: Copyright(c) Pierre Ossman
  584. sdhci-pltfm: SDHCI platform and OF driver helper
  585. mmc0: no vmmc regulator found
  586. mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
  587. mmc1: no vmmc regulator found
  588. mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
  589. qcom,leds-qpnp leds-qpnp-25: Flash wa regulator get failed(-517)
  590. qcom,leds-qpnp leds-qpnp-25: Regulator get failed(-517)
  591. qcom,leds-qpnp leds-qpnp-25: Unable to read flash config data
  592. spmi leds-qpnp-25: Driver qcom,leds-qpnp requests probe deferral
  593. QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x1
  594. QCE50: __qce_get_device_tree_data: ce-device =0x0
  595. QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000
  596. QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc5dc0000
  597. QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000
  598. QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
  599. qce qcedev.0: Qualcomm Crypto 5.1.0 device found @0xfd440000
  600. qce qcedev.0: CE device = 0x0
  601. , IO base, CE = 0xc5dc0000
  602. , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
  603. IO base BAM = 0x0
  604. BAM IRQ 268
  605. Engines Availability = 0x1010853
  606. sps:BAM 0xfd444000 is registered.
  607. sps:BAM 0xfd444000 (va:0xc5fa0000) enabled: ver:0x20, number of pipes:8
  608. mmc0: BKOPS_EN bit = 0
  609. QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x00000000fd444000 irq 268
  610. qcedev: FIPS140-2 Known Answer Tests : Skipped
  611. QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x2
  612. QCE50: __qce_get_device_tree_data: ce-device =0x0
  613. QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000
  614. QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc5fc0000
  615. QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000
  616. QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
  617. qcrypto fd440000.qcom,qcrypto: Qualcomm Crypto 5.1.0 device found @0xfd440000
  618. qcrypto fd440000.qcom,qcrypto: CE device = 0x0
  619. , IO base, CE = 0xc5fc0000
  620. , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
  621. IO base BAM = 0x0
  622. BAM IRQ 268
  623. Engines Availability = 0x1010853
  624. mmc0: new HS400 MMC card at address 0001
  625. mmcblk0: mmc0:0001 BWBC3R 29.1 GiB
  626. mmcblk0rpmb: mmc0:0001 BWBC3R partition 3 4.00 MiB
  627. mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20
  628. QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x00000000fd444000 irq 268
  629. qcrypto fd440000.qcom,qcrypto: qcrypto-ecb-aes
  630. qcrypto fd440000.qcom,qcrypto: qcrypto-cbc-aes
  631. qcrypto fd440000.qcom,qcrypto: qcrypto-ctr-aes
  632. qcrypto fd440000.qcom,qcrypto: qcrypto-ecb-des
  633. qcrypto fd440000.qcom,qcrypto: qcrypto-cbc-des
  634. qcrypto fd440000.qcom,qcrypto: qcrypto-ecb-3des
  635. qcrypto fd440000.qcom,qcrypto: qcrypto-cbc-3des
  636. qcrypto fd440000.qcom,qcrypto: qcrypto-xts-aes
  637. qcrypto fd440000.qcom,qcrypto: qcrypto-sha1
  638. qcrypto fd440000.qcom,qcrypto: qcrypto-sha256
  639. qcrypto fd440000.qcom,qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
  640. qcrypto fd440000.qcom,qcrypto: qcrypto-aead-hmac-sha1-cbc-des
  641. qcrypto fd440000.qcom,qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
  642. qcrypto fd440000.qcom,qcrypto: qcrypto-hmac-sha1
  643. qcrypto fd440000.qcom,qcrypto: qcrypto-hmac-sha256
  644. qcrypto fd440000.qcom,qcrypto: qcrypto-aes-ccm
  645. qcrypto fd440000.qcom,qcrypto: qcrypto-rfc4309-aes-ccm
  646. qcrypto: FIPS140-2 Known Answer Tests: Skipped
  647. QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x0
  648. QCE50: __qce_get_device_tree_data: ce-device =0x1
  649. QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000
  650. QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc6140000
  651. QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000
  652. QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
  653. qcrypto fd440000.qcom,qcrypto1: Qualcomm Crypto 5.1.0 device found @0xfd440000
  654. qcrypto fd440000.qcom,qcrypto1: CE device = 0x1
  655. , IO base, CE = 0xc6140000
  656. , Consumer (IN) PIPE 0, Producer (OUT) PIPE 1
  657. IO base BAM = 0x0
  658. BAM IRQ 268
  659. Engines Availability = 0x1010853
  660. fwu_start_reflash: Start of reflash process
  661. synaptics_dsx_i2c 2-0020: fwu_go_nogo: Device firmware ID = 1670638
  662. synaptics_dsx_i2c 2-0020: fwu_go_nogo: Image firmware ID = 1670638
  663. synaptics_dsx_i2c 2-0020: fwu_go_nogo: Device config ID = 0x99 0x74 0x04 0x24
  664. synaptics_dsx_i2c 2-0020: fwu_go_nogo: Image config ID = 0x99 0x74 0x04 0x24
  665. synaptics_dsx_i2c 2-0020: fwu_go_nogo: No need to do reflash
  666. QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x00000000fd444000 irq 268
  667. qcrypto: FIPS140-2 Known Answer Tests: Skipped
  668. synaptics_dsx_i2c 2-0020: synaptics_rmi4_f1a_button_map: Button map is missing in board file
  669. usbcore: registered new interface driver usbhid
  670. usbhid: USB HID core driver
  671. ashmem: initialized
  672. logger: created 256K log 'log_main'
  673. logger: created 256K log 'log_events'
  674. logger: created 256K log 'log_radio'
  675. logger: created 256K log 'log_system'
  676. sps:BAM 0xf9304000 is registered.
  677. sps:BAM 0xf9a44000 is registered.
  678. usb_bam_ipa_create_resources: Failed to create USB_PROD resource
  679. qcom,qpnp-power-on qpnp-power-on-7: PMIC@SID0 Power-on reason: Triggered from USB (USB charger insertion) and 'cold' boot
  680. qcom,qpnp-power-on qpnp-power-on-7: PMIC@SID0: Power-off reason: Triggered from UVLO (Under Voltage Lock Out)
  681. input: qpnp_pon as /devices/virtual/input/input1
  682. qpnp_coincell_charger_show_state: enabled=Y, voltage=3000 mV, resistance=2100 ohm
  683. fwu_start_reflash: End of reflash process
  684. pft [pft_init]: Drivr initialized successfully Apr 10 2019 07:55:09.n
  685. PMIC@SID4: PM8841 v2.1 options: 0, 0, 2, 2
  686. PMIC@SID0: PM8941 v3.1 options: 0, 0, 0, 0
  687. usbcore: registered new interface driver snd-usb-audio
  688. msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
  689. platform qcom,msm-voip-dsp.52: Driver msm-voip-dsp requests probe deferral
  690. platform qcom,msm-pcm-voice.53: Driver msm-pcm-voice requests probe deferral
  691. ocmem: Notifier registered for 5
  692. msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
  693. platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
  694. oprofile: using arm/armv7-krait
  695. u32 classifier
  696. Actions configured
  697. Netfilter messages via NETLINK v0.30.
  698. nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  699. ctnetlink v0.93: registering with nfnetlink.
  700. NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  701. NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  702. xt_time: kernel timezone is -0000
  703. ip_tables: (C) 2000-2006 Netfilter Core Team
  704. arp_tables: (C) 2002 David S. Miller
  705. TCP: cubic registered
  706. Initializing XFRM netlink socket
  707. NET: Registered protocol family 10
  708. Mobile IPv6
  709. ip6_tables: (C) 2000-2006 Netfilter Core Team
  710. IPv6 over IPv4 tunneling driver
  711. NET: Registered protocol family 17
  712. NET: Registered protocol family 15
  713. Bridge firewalling registered
  714. Ebtables v2.0 registered
  715. Bluetooth: RFCOMM TTY layer initialized
  716. Bluetooth: RFCOMM socket layer initialized
  717. Bluetooth: RFCOMM ver 1.11
  718. Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  719. Bluetooth: BNEP filters: protocol multicast
  720. Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  721. L2TP core driver, V2.0
  722. PPPoL2TP kernel driver, V2.0
  723. L2TP netlink interface
  724. L2TP debugfs support
  725. Registering SWP/SWPB emulation handler
  726. gdsc_oxili_gx: disabling
  727. gdsc_venus: disabling
  728. msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
  729. input: gpio-keys as /devices/gpio_keys.86/input/input2
  730. qcom,qpnp-rtc qpnp-rtc-17: setting system clock to 1970-02-13 12:29:04 UTC (3760144)
  731. platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
  732. qcom,leds-qpnp leds-qpnp-25: Flash wa regulator get failed(-517)
  733. qcom,leds-qpnp leds-qpnp-25: Regulator get failed(-517)
  734. qcom,leds-qpnp leds-qpnp-25: Unable to read flash config data
  735. spmi leds-qpnp-25: Driver qcom,leds-qpnp requests probe deferral
  736. flash_wa:
  737. batfet:
  738. 8941_smbb_otg:
  739. 8941_smbb_otg: supplied by 8941_boost
  740. 8941_smbb_boost: 5000 mV
  741. qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 1, dc = 0 b_health = 1 batt_present = 1
  742. msm_thermal:interrupt_mode_init Interrupt mode init
  743. msm_thermal:disable_msm_thermal Max frequency reset for CPU0
  744. msm_thermal:disable_msm_thermal Max frequency reset for CPU1
  745. msm_thermal:disable_msm_thermal Max frequency reset for CPU2
  746. msm_thermal:disable_msm_thermal Max frequency reset for CPU3
  747. clock_late_init: Removing enables held for handed-off clocks
  748. ALSA device list:
  749. No soundcards foõFreeing init memory: 384K
  750. init: init first stage started!
  751. init: Using Android DT directory /proc/device-tree/firmware/android/
  752. init: [libfs_mgr]fs_mgr_read_fstab_default(): failed to find device default fstab
  753. BMS: qpnp_bms_probe: probe success: soc =61 vbatt = 3774972 ocv = 3933137 r_sense_uohm = 9031 warm_reset = 0
  754. ethernet_phy:
  755. dwc3 f9200000.dwc3: Avail curr from USB = 1500
  756. bif_ctrl_register: Battery pack present = Y
  757. bif_ctrl_register: Battery pack type = low cost (Rid=61870 ohm)
  758. 8941_mvs1:
  759. 8941_mvs1: supplied by 8941_smbb_otg
  760. msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
  761. platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
  762. msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
  763. platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
  764. EXT4-fs (mmcblk0p13): mounted filesystem without journal. Opts: barrier=1,discard
  765. init: [libfs_mgr]__mount(source=/dev/block/platform/msm_sdcc.1/by-name/system,target=/system,type=ext4)=0: Success
  766. init: Skipped setting INIT_AVB_VERSION (not in recovery mode)
  767. init: Loading SELinux policy
  768. , 1 sens, 1024 cats
  769.  
  770. SELinux: Permission transition in class filesystem not defined in policy.
  771. SELinux: Permission swapon in class file not defined in policy.
  772. SELinux: Permission swapon in class dir not defined in policy.
  773. SELinux: Permission swapon in class lnk_file not defined in policy.
  774. SELinux: Permission swapon in class chr_file not defined in policy.
  775. SELinux: Permission swapon in class blk_file not defined in policy.
  776. SELinux: Permission swapon in class sock_file not defined in policy.
  777. SELinux: Permission swapon in class fifo_file not defined in policy.
  778. SELinux: Permission recv_msg in class socket not defined in policy.
  779. SELinux: Permission send_msg in class socket not defined in policy.
  780. SELinux: Permission recv_msg in class tcp_socket not defined in policy.
  781. SELinux: Permission send_msg in class tcp_socket not defined in policy.
  782. SELinux: Permission connectto in class tcp_socket not defined in policy.
  783. SELinux: Permission newconn in class tcp_socket not defined in policy.
  784. SELinux: Permission acceptfrom in class tcp_socket not defined in policy.
  785. SELinux: Permission recv_msg in class udp_socket not defined in policy.
  786. SELinux: Permission send_msg in class udp_socket not defined in policy.
  787. SELinux: Permission recv_msg in class rawip_socket not defined in policy.
  788. SELinux: Permission send_msg in class rawip_socket not defined in policy.
  789. SELinux: Permission tcp_recv in class node not defined in policy.
  790. SELinux: Permission tcp_send in class node not defined in policy.
  791. SELinux: Permission udp_recv in class node not defined in policy.
  792. SELinux: Permission udp_send in class node not defined in policy.
  793. SELinux: Permission rawip_recv in class node not defined in policy.
  794. SELinux: Permission rawip_send in class node not defined in policy.
  795. SELinux: Permission enforce_dest in class node not defined in policy.
  796. SELinux: Permission dccp_recv in class node not defined in policy.
  797. SELinux: Permission dccp_send in class node not defined in policy.
  798. SELinux: Permission tcp_recv in class netif not defined in policy.
  799. SELinux: Permission tcp_send in class netif not defined in policy.
  800. SELinux: Permission udp_recv in class netif not defined in policy.
  801. SELinux: Permission udp_send in class netif not defined in policy.
  802. SELinux: Permission rawip_recv in class netif not defined in policy.
  803. SELinux: Permission rawip_send in class netif not defined in policy.
  804. SELinux: Permission dccp_recv in class netif not defined in policy.
  805. SELinux: Permission dccp_send in class netif not defined in policy.
  806. SELinux: Permission recv_msg in class netlink_socket not defined in policy.
  807. SELinux: Permission send_msg in class netlink_socket not defined in policy.
  808. SELinux: Permission recv_msg in class packet_socket not defined in policy.
  809. SELinux: Permission send_msg in class packet_socket not defined in policy.
  810. SELinux: Permission recv_msg in class key_socket not defined in policy.
  811. SELinux: Permission send_msg in class key_socket not defined in policy.
  812. SELinux: Permission recv_msg in class unix_stream_socket not defined in policy.
  813. SELinux: Permission send_msg in class unix_stream_socket not defined in policy.
  814. SELinux: Permission newconn in class unix_stream_socket not defined in policy.
  815. SELinux: Permission acceptfrom in class unix_stream_socket not defined in policy.
  816. SELinux: Permission recv_msg in class unix_dgram_socket not defined in policy.
  817. SELinux: Permission send_msg in class unix_dgram_socket not defined in policy.
  818. SELinux: Permission recv_msg in class netlink_route_socket not defined in policy.
  819. SELinux: Permission send_msg in class netlink_route_socket not defined in policy.
  820. SELinux: Class netlink_firewall_socket not defined in policy.
  821. SELinux: Permission recv_msg in class netlink_tcpdiag_socket not defined in policy.
  822. SELinux: Permission send_msg in class netlink_tcpdiag_socket not defined in policy.
  823. SELinux: Permission recv_msg in class netlink_nflog_socket not defined in policy.
  824. SELinux: Permission send_msg in class netlink_nflog_socket not defined in policy.
  825. SELinux: Permission recv_msg in class netlink_xfrm_socket not defined in policy.
  826. SELinux: Permission send_msg in class netlink_xfrm_socket not defined in policy.
  827. SELinux: Permission recv_msg in class netlink_selinux_socket not defined in policy.
  828. SELinux: Permission send_msg in class netlink_selinux_socket not defined in policy.
  829. SELinux: Permission recv_msg in class netlink_audit_socket not defined in policy.
  830. SELinux: Permission send_msg in class netlink_audit_socket not defined in policy.
  831. SELinux: Class netlink_ip6fw_socket not defined in policy.
  832. SELinux: Permission recv_msg in class netlink_dnrt_socket not defined in policy.
  833. SELinux: Permission send_msg in class netlink_dnrt_socket not defined in policy.
  834. SELinux: Permission recv_msg in class netlink_kobject_uevent_socket not defined in policy.
  835. SELinux: Permission send_msg in class netlink_kobject_uevent_socket not defined in policy.
  836. SELinux: Permission recv_msg in class appletalk_socket not defined in policy.
  837. SELinux: Permission send_msg in class appletalk_socket not defined in policy.
  838. SELinux: Permission recv_msg in class dccp_socket not defined in policy.
  839. SELinux: Permission send_msg in class dccp_socket not defined in policy.
  840. SELinux: Permission recv_msg in class tun_socket not defined in policy.
  841. SELinux: Permission send_msg in class tun_socket not defined in policy.
  842. SELinux: the above unknown classes and permissions will be denied
  843. type=1403 audit(3760145.670:2): policy loaded auid=4294967295 ses=4294967295
  844. selinux: SELinux: Loaded policy from /sepolicy
  845.  
  846. type=1404 audit(3760145.690:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  847. selinux: SELinux: Loaded file_contexts
  848.  
  849. init: init second stage started!
  850. init: Using Android DT directory /proc/device-tree/firmware/android/
  851. selinux: SELinux: Loaded file_contexts
  852.  
  853. init: Running restorecon...
  854. init: waitid failed: No child processes
  855. init: Couldn't load property file '/system/etc/prop.default': open() failed: No such file or directory: No such file or directory
  856. init: Couldn't load property file '/prop.default': open() failed: No such file or directory: No such file or directory
  857. init: Unable to set property '' to '' in property file '/product/build.prop': Illegal property name
  858. init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such file or directory
  859. init: Couldn't load property file '/vendor/default.prop': open() failed: No such file or directory: No such file or directory
  860. init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
  861. init: Forked subcontext for 'u:r:vendor_init:s0' with pid 216
  862. kworker/u:1 used greatest stack depth: 6108 bytes left
  863. init: Forked subcontext for 'u:r:vendor_init:s0' with pid 219
  864. init: Parsing file /init.rc...
  865. init: Added '/init.environ.rc' to import list
  866. init: Added '/init.usb.rc' to import list
  867. init: Added '/init.qcom.rc' to import list
  868. init: Added '/vendor/etc/init/hw/init.qcom.rc' to import list
  869. init: Added '/init.usb.configfs.rc' to import list
  870. init: Added '/init.zygote32.rc' to import list
  871. init: Parsing file /init.environ.rc...
  872. init: Parsing file /init.usb.rc...
  873. init: Parsing file /init.qcom.rc...
  874. init: Unable to read config file '/init.qcom.rc': open() failed: No such file or directory
  875. init: /init.rc: 9: Could not import file '/init.qcom.rc': No such file or directory
  876. init: Parsing file /vendor/etc/init/hw/init.qcom.rc...
  877. init: Added '/vendor/etc/init/hw/init.qcom.usb.rc' to import list
  878. init: Added '/vendor/etc/init/hw/init.qcom.power.rc' to import list
  879. init: Parsing file /vendor/etc/init/hw/init.qcom.usb.rc...
  880. init: Parsing file /vendor/etc/init/hw/init.qcom.power.rc...
  881. init: Parsing file /init.usb.configfs.rc...
  882. init: Parsing file /init.zygote32.rc...
  883. init: Parsing directory /system/etc/init...
  884. init: Parsing file /system/etc/init/android.hidl.allocator@1.0-service.rc...
  885. init: Parsing file /system/etc/init/atrace.rc...
  886. init: Parsing file /system/etc/init/atrace_userdebug.rc...
  887. init: Parsing file /system/etc/init/audioserver.rc...
  888. init: Parsing file /system/etc/init/blank_screen.rc...
  889. init: Parsing file /system/etc/init/bootanim.rc...
  890. init: Parsing file /system/etc/init/bootstat-debug.rc...
  891. init: Parsing file /system/etc/init/bootstat.rc...
  892. init: Parsing file /system/etc/init/drmserver.rc...
  893. init: Parsing file /system/etc/init/dumpstate.rc...
  894. init: Parsing file /system/etc/init/gatekeeperd.rc...
  895. init: Parsing file /system/etc/init/healthd.rc...
  896. init: Parsing file /system/etc/init/hwservicemanager.rc...
  897. init: Parsing file /system/etc/init/incidentd.rc...
  898. init: Parsing file /system/etc/init/init-debug.rc...
  899. init: Parsing file /system/etc/init/installd.rc...
  900. init: Parsing file /system/etc/init/keystore.rc...
  901. init: Parsing file /system/etc/init/lineage-adb.rc...
  902. init: Parsing file /system/etc/init/lineage-governor.rc...
  903. init: Parsing file /system/etc/init/lineage-iosched.rc...
  904. init: Parsing file /system/etc/init/lineage-livedisplay.rc...
  905. init: Parsing file /system/etc/init/lineage-radio.rc...
  906. init: Parsing file /system/etc/init/lineage-ssh.rc...
  907. init: Parsing file /system/etc/init/lineage-system.rc...
  908. init: Parsing file /system/etc/init/lineage-tcp.rc...
  909. init: Parsing file /system/etc/init/lineage-updates.rc...
  910. init: Parsing file /system/etc/init/lmkd.rc...
  911. init: Parsing file /system/etc/init/logcatd.rc...
  912. init: Parsing file /system/etc/init/logd.rc...
  913. init: Parsing file /system/etc/init/logtagd.rc...
  914. init: Parsing file /system/etc/init/mdnsd.rc...
  915. init: Parsing file /system/etc/init/mediadrmserver.rc...
  916. init: Parsing file /system/etc/init/mediaextractor.rc...
  917. init: Parsing file /system/etc/init/mediametrics.rc...
  918. init: Parsing file /system/etc/init/mediaserver.rc...
  919. init: Parsing file /system/etc/init/mtpd.rc...
  920. init: Parsing file /system/etc/init/netd.rc...
  921. init: Parsing file /system/etc/init/perfetto.rc...
  922. init: Parsing file /system/etc/init/perfprofd.rc...
  923. init: Parsing file /system/etc/init/racoon.rc...
  924. init: Parsing file /system/etc/init/servicemanager.rc...
  925. init: Parsing file /system/etc/init/statsd.rc...
  926. init: Parsing file /system/etc/init/storaged.rc...
  927. init: Parsing file /system/etc/init/superuser.rc...
  928. init: Parsing file /system/etc/init/surfaceflinger.rc...
  929. init: Parsing file /system/etc/init/thermalservice.rc...
  930. init: Parsing file /system/etc/init/tombstoned.rc...
  931. init: Parsing file /system/etc/init/uncrypt.rc...
  932. init: Parsing file /system/etc/init/usbd.rc...
  933. init: Parsing file /system/etc/init/vdc.rc...
  934. init: Parsing file /system/etc/init/vold.rc...
  935. init: Parsing file /system/etc/init/wait_for_keymaster.rc...
  936. init: Parsing file /system/etc/init/wifi-events.rc...
  937. init: Parsing file /system/etc/init/wificond.rc...
  938. init: Parsing file /product/etc/init...
  939. init: Unable to read config file '/product/etc/init': open() failed: No such file or directory
  940. init: Parsing file /odm/etc/init...
  941. init: Unable to read config file '/odm/etc/init': open() failed: No such file or directory
  942. init: Parsing directory /vendor/etc/init...
  943. init: Parsing file /vendor/etc/init/android.hardware.cas@1.0-service.rc...
  944. init: Parsing file /vendor/etc/init/android.hardware.configstore@1.1-service.rc...
  945. init: Parsing file /vendor/etc/init/android.hardware.drm@1.0-service.rc...
  946. init: Parsing file /vendor/etc/init/android.hardware.graphics.allocator@2.0-service.rc...
  947. init: Parsing file /vendor/etc/init/android.hardware.light@2.0-service.FP2.rc...
  948. init: Parsing file /vendor/etc/init/android.hardware.media.omx@1.0-service.rc...
  949. init: Parsing file /vendor/etc/init/android.hardware.power@1.1-service-qti.rc...
  950. init: Parsing file /vendor/etc/init/android.hardware.usb@1.0-service.basic.rc...
  951. init: Parsing file /vendor/etc/init/android.hardware.wifi@1.0-service.rc...
  952. init: Parsing file /vendor/etc/init/hostapd.android.rc...
  953. init: Parsing file /vendor/etc/init/rild.legacy.rc...
  954. init: Parsing file /vendor/etc/init/vendor.lineage.trust@1.0-service.rc...
  955. init: Parsing file /vendor/etc/init/vndservicemanager.rc...
  956. init: processing action (early-init) from (/init.rc:14)
  957. init: starting service 'ueventd'...
  958. init: processing action (early-init) from (/vendor/etc/init/hw/init.qcom.rc:33)
  959. ueventd: ueventd started!
  960. selinux: SELinux: Loaded file_contexts
  961.  
  962. ueventd: Parsing file /ueventd.rc...
  963. ueventd: Parsing file /vendor/ueventd.rc...
  964. init: processing action (early-init) from (/vendor/etc/init/hw/init.qcom.power.rc:1)
  965. init: processing action (wait_for_coldboot_done) from (<Builtin Action>:0)
  966. ueventd: Parsing file /odm/ueventd.rc...
  967. ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
  968. ueventd: Parsing file /ueventd.qcom.rc...
  969. ueventd: Unable to read config file '/ueventd.qcom.rc': open() failed: No such file or directory
  970. qpnp_chg_idcmax_set: bad mA=0 asked to set
  971. dwc3 f9200000.dwc3: Avail curr from USB = 0
  972. msm-dwc3 msm_dwc3: DWC3 in low power mode
  973. ueventd used greatest stack depth: 5676 bytes left
  974. ueventd: Coldboot took 1.881 seconds
  975. init: wait for '/dev/.coldboot_done' took 1926ms
  976. init: Command 'wait_for_coldboot_done' action=wait_for_coldboot_done (<Builtin Action>:0) took 1930ms and succeeded
  977. init: processing action (MixHwrngIntoLinuxRng) from (<Builtin Action>:0)
  978. init: Mixed 512 bytes from /dev/hw_random into /dev/urandom
  979. init: processing action (SetMmapRndBits) from (<Builtin Action>:0)
  980. init: processing action (SetKptrRestrict) from (<Builtin Action>:0)
  981. init: processing action (keychord_init) from (<Builtin Action>:0)
  982. keychord: using input dev qpnp_pon for fevent
  983. keychord: using input dev gpio-keys for fevent
  984. init: processing action (console_init) from (<Builtin Action>:0)
  985. init: processing action (init) from (/init.rc:41)
  986. init: Command 'mount cpuset none /dev/cpuset nodev noexec nosuid' action=init (/init.rc:162) took 0ms and failed: mount() failed: No such device
  987. init: Command 'mount cgroup2 cg2_bpf /dev/cg2_bpf nodev noexec nosuid' action=init (/init.rc:226) took 0ms and failed: mount() failed: No such device
  988. init: processing action (init) from (/init.environ.rc:2)
  989. init: processing action (init) from (/vendor/etc/init/hw/init.qcom.rc:48)
  990. init: processing action (init) from (/system/etc/init/lineage-iosched.rc:1)
  991. init: Command 'mount cgroup none /dev/bfqio bfqio' action=init (/system/etc/init/lineage-iosched.rc:4) took 52ms and succeeded
  992. init: processing action (init) from (/system/etc/init/lineage-system.rc:2)
  993. init: processing action (MixHwrngIntoLinuxRng) from (<Builtin Action>:0)
  994. init: Mixed 512 bytes from /dev/hw_random into /dev/urandom
  995. init: processing action (charger) from (/init.rc:688)
  996. init: starting service 'charger'...
  997. init: Command 'class_start charger' action=charger (/init.rc:689) took 56ms and succeeded
  998. charger:
  999. charger: *************** LAST KMSG ***************
  1000. charger:
  1001. charger: last_kmsg not found. Cold reset?
  1002. charger:
  1003. charger: ************* END LAST KMSG *************
  1004. charger:
  1005. charger: --------------- STARTING CHARGER MODE ---------------
  1006. charger: Could not open animation description at /res/values/charger/animation.txt
  1007. charger: Could not parse animation description. Using default animation.
  1008. type=1400 audit(3760148.570:4): avc: denied { read } for pid=227 comm="charger" name="type" dev="sysfs" ino=27539 scontext=u:r:charger:s0 tcontext=u:object_r:sysfs_battery_supply:s0 tclass=file permissive=0
  1009. type=1400 audit(3760148.570:5): avc: denied { read } for pid=227 comm="charger" name="type" dev="sysfs" ino=22068 scontext=u:r:charger:s0 tcontext=u:object_r:sysfs_usb_supply:s0 tclass=file permissive=0
  1010. type=1400 audit(3760148.570:6): avc: denied { read } for pid=227 comm="charger" name="type" dev="sysfs" ino=27473 scontext=u:r:charger:s0 tcontext=u:object_r:sysfs_battery_supply:s0 tclass=file permissive=0
  1011. type=1400 audit(3760148.570:7): avc: denied { read } for pid=227 comm="charger" name="type" dev="sysfs" ino=27457 scontext=u:r:charger:s0 tcontext=u:object_r:sysfs_battery_supply:s0 tclass=file permissive=0
  1012. healthd: No battery devices found
  1013. type=1400 audit(3760148.570:8): avc: denied { read } for pid=227 comm="charger" name="type" dev="sysfs" ino=27539 scontext=u:r:charger:s0 tcontext=u:object_r:sysfs_battery_supply:s0 tclass=file permissive=0
  1014. type=1400 audit(3760148.570:9): avc: denied { read } for pid=227 comm="charger" name="type" dev="sysfs" ino=22068 scontext=u:r:charger:s0 tcontext=u:object_r:sysfs_usb_supply:s0 tclass=file permissive=0
  1015. type=1400 audit(3760148.570:10): avc: denied { read } for pid=227 comm="charger" name="type" dev="sysfs" ino=27473 scontext=u:r:charger:s0 tcontext=u:object_r:sysfs_battery_supply:s0 tclass=file permissive=0
  1016. type=1400 audit(3760148.570:11): avc: denied { read } for pid=227 comm="charger" name="type" dev="sysfs" ino=27457 scontext=u:r:charger:s0 tcontext=u:object_r:sysfs_battery_supply:s0 tclass=file permissive=0
  1017. healthd: battery none chg=
  1018. charger: [9455] device unplugged: shutting down in 10000 (@ 19455)
  1019. vm_start=b3e90000 vm_end=b4e80000 vm_page_prot=1799
  1020. vm_start=b3e90000 vm_end=b4e80000 vm_page_prot=1799
  1021. vm_start=b3e90000 vm_end=b4e80000 vm_page_prot=1799
  1022. vm_start=b3e90000 vm_end=b4e80000 vm_page_prot=1799
  1023. vm_start=b3e90000 vm_end=b4e80000 vm_page_prot=1799
  1024. vm_start=b3e90000 vm_end=b4e80000 vm_page_prot=1799
  1025. vm_start=b3e90000 vm_end=b4e80000 vm_page_prot=1799
  1026. vm_start=b3e90000 vm_end=b4e80000 vm_page_prot=1799
  1027. vm_start=b3e90000 vm_end=b4e80000 vm_page_prot=1799
  1028. vm_start=b3e90000 vm_end=b4e80000 vm_page_prot=1799
  1029. vm_start=b3e90000 vm_end=b4e80000 vm_page_prot=1799
  1030. vm_start=b3e90000 vm_end=b4e80000 vm_page_prot=1799
  1031. vm_start=b3e90000 vm_end=b4e80000 vm_page_prot=1799
  1032. vm_start=b3e90000 vm_end=b4e80000 vm_page_prot=1799
  1033. vm_start=b3e90000 vm_end=b4e80000 vm_page_prot=1799
  1034. vm_start=b3e90000 vm_end=b4e80000 vm_page_prot=1799
  1035. vm_start=b3e90000 vm_end=b4e80000 vm_page_prot=1799
  1036. vm_start=b3e90000 vm_end=b4e80000 vm_page_prot=1799
  1037. vm_start=b3e90000 vm_end=b4e80000 vm_page_prot=1799
  1038. vm_start=b3e90000 vm_end=b4e80000 vm_page_prot=1799
  1039. vm_start=b3e90000 vm_end=b4e80000 vm_page_prot=1799
  1040. vm_start=b3e90000 vm_end=b4e80000 vm_page_prot=1799
  1041. vm_start=b3e90000 vm_end=b4e80000 vm_page_prot=1799
  1042. fb_notifier_callback: FB_BLANK_POWERDOWN
  1043. synaptics_rmi4_suspend
  1044. init: processing action (charger) from (/vendor/etc/init/hw/init.qcom.power.rc:70)
  1045. msm_thermal:store_cc_enabled Core control disabled
  1046. init: Command 'write /sys/devices/system/cpu/cpu1/online 1' action=charger (/vendor/etc/init/hw/init.qcom.power.rc:78) took 0ms and failed: Unable to write to file '/sys/devices/system/cpu/cpu1/online': Unable to write file contents: Invalid argument
  1047. init: Command 'write /sys/devices/system/cpu/cpu2/online 1' action=charger (/vendor/etc/init/hw/init.qcom.power.rc:79) took 0ms and failed: Unable to write to file '/sys/devices/system/cpu/cpu2/online': Unable to write file contents: Invalid argument
  1048. init: Command 'write /sys/devices/system/cpu/cpu3/online 1' action=charger (/vendor/etc/init/hw/init.qcom.power.rc:80) took 0ms and failed: Unable to write to file '/sys/devices/system/cpu/cpu3/online': Unable to write file contents: Invalid argument
  1049. msm_thermal:store_cc_enabled Core control enabled
  1050. fb_notifier_callback: FB_BLANK_UNBLANK
  1051. synaptics_rmi4_resume
  1052. msm-dwc3 msm_dwc3: DWC3 exited from low power mode
  1053. mdss_dsi_on:682 Panel already on.
  1054. fb_notifier_callback: FB_BLANK_UNBLANK
  1055. synaptics_rmi4_resume
  1056. init: processing action (queue_property_triggers) from (<Builtin Action>:0)
  1057. init: processing action (enable_property_trigger) from (<Builtin Action>:0)
  1058. init: processing action (security.perf_harden=1) from (/init.rc:736)
  1059. healthd: battery none chg=
  1060. healthd: battery none chg=
  1061. init: processing action (ro.debuggable=1) from (/init.rc:760)
  1062. init: starting service 'console'...
  1063. init: setpgid failed for console: Operation not permitted
  1064. console:/ $ healthd: battery none chg=
  1065. audit_printk_skb: 39 callbacks suppressed
  1066. type=1400 audit(3760151.580:25): avc: denied { read } for pid=227 comm="charger" name="type" dev="sysfs" ino=27539 scontext=u:r:charger:s0 tcontext=u:object_r:sysfs_battery_supply:s0 tclass=file permissive=0
  1067. type=1400 audit(3760151.600:26): avc: denied { read } for pid=227 comm="charger" name="type" dev="sysfs" ino=22068 scontext=u:r:charger:s0 tcontext=u:object_r:sysfs_usb_supply:s0 tclass=file permissive=0
  1068. type=1400 audit(3760151.620:27): avc: denied { read } for pid=227 comm="charger" name="type" dev="sysfs" ino=27473 scontext=u:r:charger:s0 tcontext=u:object_r:sysfs_battery_supply:s0 tclass=file permissive=0
  1069. type=1400 audit(3760151.640:28): avc: denied { read } for pid=227 comm="charger" name="type" dev="sysfs" ino=27457 scontext=u:r:charger:s0 tcontext=u:object_r:sysfs_battery_supply:s0 tclass=file permissive=0
  1070. healthd: battery none chg=
  1071. type=1400 audit(3760153.160:29): avc: denied { read } for pid=227 comm="charger" name="type" dev="sysfs" ino=27539 scontext=u:r:charger:s0 tcontext=u:object_r:sysfs_battery_supply:s0 tclass=file permissive=0
  1072. type=1400 audit(3760153.180:30): avc: denied { read } for pid=227 comm="charger" name="type" dev="sysfs" ino=22068 scontext=u:r:charger:s0 tcontext=u:object_r:sysfs_usb_supply:s0 tclass=file permissive=0
  1073. type=1400 audit(3760153.200:31): avc: denied { read } for pid=227 comm="charger" name="type" dev="sysfs" ino=27473 scontext=u:r:charger:s0 tcontext=u:object_r:sysfs_battery_supply:s0 tclass=file permissive=0
  1074. type=1400 audit(3760153.220:32): avc: denied { read } for pid=227 comm="charger" name="type" dev="sysfs" ino=27457 scontext=u:r:charger:s0 tcontext=u:object_r:sysfs_battery_supply:s0 tclass=file permissive=0
  1075. healthd: battery none chg=
  1076. fb_notifier_callback: FB_BLANK_POWERDOWN
  1077. synaptics_rmi4_suspend
  1078. qup_i2c f9924000.i2c: QUP: I2C status flags :0xc1300c8, irq:128
  1079. qup_i2c f9924000.i2c: I2C slave addr:0x20 not connected
  1080. synaptics_dsx_i2c 2-0020: synaptics_rmi4_i2c_read: I2C retry 1
  1081. qup_i2c f9924000.i2c: QUP: I2C status flags :0xc1300c8, irq:128
  1082. qup_i2c f9924000.i2c: I2C slave addr:0x20 not connected
  1083. synaptics_dsx_i2c 2-0020: synaptics_rmi4_i2c_read: I2C retry 2
  1084. qup_i2c f9924000.i2c: QUP: I2C status flags :0xc1300c8, irq:128
  1085. qup_i2c f9924000.i2c: I2C slave addr:0x20 not connected
  1086. synaptics_dsx_i2c 2-0020: synaptics_rmi4_i2c_read: I2C retry 3
  1087. qup_i2c f9924000.i2c: QUP: I2C status flags :0xc1300c8, irq:128
  1088. qup_i2c f9924000.i2c: I2C slave addr:0x20 not connected
  1089. synaptics_dsx_i2c 2-0020: synaptics_rmi4_i2c_read: I2C retry 4
  1090. qup_i2c f9924000.i2c: QUP: I2C status flags :0xc1300c8, irq:128
  1091. qup_i2c f9924000.i2c: I2C slave addr:0x20 not connected
  1092. synaptics_dsx_i2c 2-0020: synaptics_rmi4_i2c_read: I2C retry 5
  1093. qup_i2c f9924000.i2c: QUP: I2C status flags :0xc1300c8, irq:128
  1094. qup_i2c f9924000.i2c: I2C slave addr:0x20 not connected
  1095. synaptics_dsx_i2c 2-0020: synaptics_rmi4_i2c_read: I2C retry 6
  1096. qup_i2c f9924000.i2c: QUP: I2C status flags :0xc1300c8, irq:128
  1097. qup_i2c f9924000.i2c: I2C slave addr:0x20 not connected
  1098. synaptics_dsx_i2c 2-0020: synaptics_rmi4_i2c_read: I2C retry 7
  1099. qup_i2c f9924000.i2c: QUP: I2C status flags :0xc1300c8, irq:128
  1100. qup_i2c f9924000.i2c: I2C slave addr:0x20 not connected
  1101. synaptics_dsx_i2c 2-0020: synaptics_rmi4_i2c_read: I2C retry 8
  1102. qup_i2c f9924000.i2c: QUP: I2C status flags :0xc1300c8, irq:128
  1103. qup_i2c f9924000.i2c: I2C slave addr:0x20 not connected
  1104. synaptics_dsx_i2c 2-0020: synaptics_rmi4_i2c_read: I2C retry 9
  1105. qup_i2c f9924000.i2c: QUP: I2C status flags :0xc1300c8, irq:128
  1106. qup_i2c f9924000.i2c: I2C slave addr:0x20 not connected
  1107. synaptics_dsx_i2c 2-0020: synaptics_rmi4_i2c_read: I2C retry 10
  1108. synaptics_dsx_i2c 2-0020: synaptics_rmi4_i2c_read: I2C read over retry limit
  1109. synaptics_dsx_i2c 2-0020: synaptics_rmi4_sensor_sleep: Failed to enter sleep mode
  1110. pp_ad_calc_bl: Failed to get ad info: ret = -112, ad = 0x00000000.
  1111. type=1400 audit(3760158.579:33): avc: denied { read } for pid=227 comm="charger" name="type" dev="sysfs" ino=27539 scontext=u:r:charger:s0 tcontext=u:object_r:sysfs_battery_supply:s0 tclass=file permissive=0
  1112. type=1400 audit(3760158.599:34): avc: denied { read } for pid=227 comm="charger" name="type" dev="sysfs" ino=22068 scontext=u:r:charger:s0 tcontext=u:object_r:sysfs_usb_supply:s0 tclass=file permissive=0
  1113. type=1400 audit(3760158.619:35): avc: denied { read } for pid=227 comm="charger" name="type" dev="sysfs" ino=27473 scontext=u:r:charger:s0 tcontext=u:object_r:sysfs_battery_supply:s0 tclass=file permissive=0
  1114. type=1400 audit(3760158.639:36): avc: denied { read } for pid=227 comm="charger" name="type" dev="sysfs" ino=27457 scontext=u:r:charger:s0 tcontext=u:object_r:sysfs_battery_supply:s0 tclass=file permissive=0
  1115. healthd: battery none chg=
  1116. charger: [19537] shutting down
  1117. mdss_fb_release_all: try to close unopened fb 1! from charger
  1118. mdss_fb_release_all: unknown process charger pid=227 mfd->ref=0
  1119. mdss_fb_release_all: AD shutdown cleanup failed ret = -22
  1120. Disabling non-boot CPUs ...
  1121. Power down.
  1122. Powering off the SoC
  1123. Calling SCM to disable SPMI PMIC arbiteò
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!