SHARE
TWEET

After Reboot

a guest Oct 21st, 2019 79 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. 3
  2. U-Boot SPL 2016.03-00001-gd12d09f (Mar 17 2016 - 16:16:15)
  3. Trying to boot from MMC
  4. bad magic
  5.  
  6.  
  7. U-Boot 2016.03-00001-gd12d09f (Mar 17 2016 - 16:16:15 -0500), Build: jenkins-github_Bootloader-Builder-351
  8.  
  9.        Watchdog enabled
  10. I2C:   ready
  11. DRAM:  512 MiB
  12. Reset Source: Power-on reset has occurred.
  13. MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
  14. Using default environment
  15.  
  16. Net:   <ethaddr> not set. Validating first E-fuse MAC
  17. cpsw, usb_ether
  18. Press SPACE to abort autoboot in 2 seconds
  19. Card did not respond to voltage select!
  20. gpio: pin 56 (gpio 56) value is 0
  21. gpio: pin 55 (gpio 55) value is 0
  22. gpio: pin 54 (gpio 54) value is 0
  23. gpio: pin 53 (gpio 53) value is 1
  24. Card did not respond to voltage select!
  25. Card did not respond to voltage select!
  26. switch to partitions #0, OK
  27. mmc1(part 0) is current device
  28. Scanning mmc 1:1...
  29. gpio: pin 56 (gpio 56) value is 0
  30. gpio: pin 55 (gpio 55) value is 0
  31. gpio: pin 54 (gpio 54) value is 0
  32. gpio: pin 53 (gpio 53) value is 1
  33. switch to partitions #0, OK
  34. mmc1(part 0) is current device
  35. gpio: pin 54 (gpio 54) value is 1
  36. Checking for: /uEnv.txt ...
  37. Checking for: /boot.scr ...
  38. Checking for: /boot/boot.scr ...
  39. Checking for: /boot/uEnv.txt ...
  40. gpio: pin 55 (gpio 55) value is 1
  41. 1182 bytes read in 15 ms (76.2 KiB/s)
  42. Loaded environment from /boot/uEnv.txt
  43. Checking if uname_r is set in /boot/uEnv.txt...
  44. gpio: pin 56 (gpio 56) value is 1
  45. Running uname_boot ...
  46. loading /boot/vmlinuz-4.4.9-ti-r25 ...
  47. 7833256 bytes read in 447 ms (16.7 MiB/s)
  48. loading /boot/dtbs/4.4.9-ti-r25/am335x-boneblack.dtb ...
  49. 60958 bytes read in 28 ms (2.1 MiB/s)
  50. loading /boot/initrd.img-4.4.9-ti-r25 ...
  51. 4761957 bytes read in 277 ms (16.4 MiB/s)
  52. debug: [console=ttyO0,115200n8 root=UUID=c7ea2771-652f-468e-b91d-d881349c2be9 ro rootfstype=ext4 rootwait init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh] ...
  53. debug: [bootz 0x82000000 0x88080000:48a965 0x88000000] ...
  54. Kernel image @ 0x82000000 [ 0x000000 - 0x7786a8 ]
  55. ## Flattened Device Tree blob at 88000000
  56.    Booting using the fdt blob at 0x88000000
  57.    Loading Ramdisk to 8fb75000, end 8ffff965 ... OK
  58.    Loading Device Tree to 8fb63000, end 8fb74e1d ... OK
  59.  
  60. Starting kernel ...
  61.  
  62. [    0.000000] Booting Linux on physical CPU 0x0
  63. [    0.000000] Initializing cgroup subsys cpuset
  64. [    0.000000] Initializing cgroup subsys cpu
  65. [    0.000000] Initializing cgroup subsys cpuacct
  66. [    0.000000] Linux version 4.4.9-ti-r25 (root@b3-jetson-tk1-2gb) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Thu May 5 23:08:13 UTC 2016
  67. [    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
  68. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  69. [    0.000000] Machine model: TI AM335x BeagleBone Black
  70. [    0.000000] cma: Reserved 24 MiB at 0x9e000000
  71. [    0.000000] Memory policy: Data cache writeback
  72. [    0.000000] CPU: All CPU(s) started in SVC mode.
  73. [    0.000000] AM335X ES2.1 (sgx neon )
  74. [    0.000000] PERCPU: Embedded 13 pages/cpu @df923000 s24320 r8192 d20736 u53248
  75. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129408
  76. [    0.000000] Kernel command line: console=ttyO0,115200n8 root=UUID=c7ea2771-652f-468e-b91d-d881349c2be9 ro rootfstype=ext4 rootwait init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh
  77. [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  78. [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  79. [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  80. [    0.000000] Memory: 474080K/522240K available (7344K kernel code, 914K rwdata, 3704K rodata, 604K init, 907K bss, 23584K reserved, 24576K cma-reserved, 0K highmem)
  81. [    0.000000] Virtual kernel memory layout:
  82. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  83. [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  84. [    0.000000]     vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
  85. [    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
  86. [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  87. [    0.000000]     modules : 0xbf800000 - 0xbfe00000   (   6 MB)
  88. [    0.000000]       .text : 0xc0008000 - 0xc0ad2480   (11050 kB)
  89. [    0.000000]       .init : 0xc0ad3000 - 0xc0b6a000   ( 604 kB)
  90. [    0.000000]       .data : 0xc0b6a000 - 0xc0c4e818   ( 915 kB)
  91. [    0.000000]        .bss : 0xc0c51000 - 0xc0d33de8   ( 908 kB)
  92. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  93. [    0.000000] Hierarchical RCU implementation.
  94. [    0.000000]  Build-time adjustment of leaf fanout to 32.
  95. [    0.000000]  RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
  96. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
  97. [    0.000000] NR_IRQS:16 nr_irqs:16 16
  98. [    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
  99. [    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
  100. [    0.000011] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
  101. [    0.000030] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  102. [    0.000042] OMAP clocksource: timer1 at 24000000 Hz
  103. [    0.000224] Console: colour dummy device 80x30
  104. [    0.000249] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
  105. [    0.000256] This ensures that you still see kernel messages. Please
  106. [    0.000262] update your kernel commandline.
  107. [    0.000280] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
  108. [    0.046947] pid_max: default: 32768 minimum: 301
  109. [    0.047079] Security Framework initialized
  110. [    0.047092] Yama: becoming mindful.
  111. [    0.047124] AppArmor: AppArmor disabled by boot time parameter
  112. [    0.047281] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  113. [    0.047292] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  114. [    0.048066] Initializing cgroup subsys io
  115. [    0.048094] Initializing cgroup subsys memory
  116. [    0.048133] Initializing cgroup subsys devices
  117. [    0.048150] Initializing cgroup subsys freezer
  118. [    0.048165] Initializing cgroup subsys net_cls
  119. [    0.048179] Initializing cgroup subsys perf_event
  120. [    0.048193] Initializing cgroup subsys net_prio
  121. [    0.048208] Initializing cgroup subsys pids
  122. [    0.048266] CPU: Testing write buffer coherency: ok
  123. [    0.048317] ftrace: allocating 34073 entries in 67 pages
  124. [    0.133460] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  125. [    0.133582] Setting up static identity map for 0x80008240 - 0x8000828c
  126. [    0.136972] Brought up 1 CPUs
  127. [    0.136994] SMP: Total of 1 processors activated (995.32 BogoMIPS).
  128. [    0.137001] CPU: All CPU(s) started in SVC mode.
  129. [    0.138422] devtmpfs: initialized
  130. [    0.157059] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  131. [    0.174928] omap_hwmod: debugss: _wait_target_disable failed
  132. [    0.228721] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  133. [    0.230777] xor: measuring software checksum speed
  134. [    0.266948]    arm4regs  :  1221.000 MB/sec
  135. [    0.306946]    8regs     :  1094.000 MB/sec
  136. [    0.346944]    32regs    :  1093.000 MB/sec
  137. [    0.386944]    neon      :  1754.000 MB/sec
  138. [    0.386951] xor: using function: neon (1754.000 MB/sec)
  139. [    0.387050] pinctrl core: initialized pinctrl subsystem
  140. [    0.389015] NET: Registered protocol family 16
  141. [    0.391679] DMA: preallocated 256 KiB pool for atomic coherent allocations
  142. [    0.392887] cpuidle: using governor ladder
  143. [    0.392908] cpuidle: using governor menu
  144. [    0.397857] OMAP GPIO hardware version 0.1
  145. [    0.409848] No ATAGs?
  146. [    0.409878] hw-breakpoint: debug architecture 0x4 unsupported.
  147. [    0.410415] omap4_sram_init:Unable to allocate sram needed to handle errata I688
  148. [    0.410427] omap4_sram_init:Unable to get sram pool needed to handle errata I688
  149. [    0.487098] raid6: int32x1  gen()   269 MB/s
  150. [    0.555032] raid6: int32x1  xor()   236 MB/s
  151. [    0.623052] raid6: int32x2  gen()   356 MB/s
  152. [    0.690969] raid6: int32x2  xor()   269 MB/s
  153. [    0.759031] raid6: int32x4  gen()   405 MB/s
  154. [    0.827033] raid6: int32x4  xor()   259 MB/s
  155. [    0.895091] raid6: int32x8  gen()   359 MB/s
  156. [    0.962945] raid6: int32x8  xor()   231 MB/s
  157. [    1.030972] raid6: neonx1   gen()  1460 MB/s
  158. [    1.098954] raid6: neonx1   xor()   845 MB/s
  159. [    1.166951] raid6: neonx2   gen()  1882 MB/s
  160. [    1.234945] raid6: neonx2   xor()  1171 MB/s
  161. [    1.302961] raid6: neonx4   gen()  1975 MB/s
  162. [    1.370954] raid6: neonx4   xor()  1203 MB/s
  163. [    1.438947] raid6: neonx8   gen()  1211 MB/s
  164. [    1.506983] raid6: neonx8   xor()   672 MB/s
  165. [    1.506990] raid6: using algorithm neonx4 gen() 1975 MB/s
  166. [    1.506997] raid6: .... xor() 1203 MB/s, rmw enabled
  167. [    1.507003] raid6: using intx1 recovery algorithm
  168. [    1.516127] edma 49000000.edma: TI EDMA DMA engine driver
  169. [    1.520852] SCSI subsystem initialized
  170. [    1.521570] usbcore: registered new interface driver usbfs
  171. [    1.521651] usbcore: registered new interface driver hub
  172. [    1.521751] usbcore: registered new device driver usb
  173. [    1.522335] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
  174. [    1.522382] omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring probe
  175. [    1.522503] media: Linux media interface: v0.10
  176. [    1.522565] Linux video capture interface: v2.00
  177. [    1.522656] pps_core: LinuxPPS API ver. 1 registered
  178. [    1.522663] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  179. [    1.522690] PTP clock support registered
  180. [    1.523596] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
  181. [    1.524873] NetLabel: Initializing
  182. [    1.524884] NetLabel:  domain hash size = 128
  183. [    1.524890] NetLabel:  protocols = UNLABELED CIPSOv4
  184. [    1.524946] NetLabel:  unlabeled traffic allowed by default
  185. [    1.525269] clocksource: Switched to clocksource timer1
  186. [    1.631283] NET: Registered protocol family 2
  187. [    1.632041] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  188. [    1.632088] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  189. [    1.632147] TCP: Hash tables configured (established 4096 bind 4096)
  190. [    1.632213] UDP hash table entries: 256 (order: 1, 8192 bytes)
  191. [    1.632234] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  192. [    1.632525] NET: Registered protocol family 1
  193. [    1.633052] RPC: Registered named UNIX socket transport module.
  194. [    1.633065] RPC: Registered udp transport module.
  195. [    1.633072] RPC: Registered tcp transport module.
  196. [    1.633078] RPC: Registered tcp NFSv4.1 backchannel transport module.
  197. [    1.633738] Unpacking initramfs...
  198. [    1.969248] Freeing initrd memory: 4652K (cfb75000 - d0000000)
  199. [    1.969920] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
  200. [    1.972468] futex hash table entries: 256 (order: 2, 16384 bytes)
  201. [    1.972580] audit: initializing netlink subsys (disabled)
  202. [    1.972654] audit: type=2000 audit(1.908:1): initialized
  203. [    1.982873] zbud: loaded
  204. [    1.983515] VFS: Disk quotas dquot_6.6.0
  205. [    1.983761] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  206. [    1.986472] NFS: Registering the id_resolver key type
  207. [    1.986536] Key type id_resolver registered
  208. [    1.986544] Key type id_legacy registered
  209. [    1.986569] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  210. [    1.986900] fuse init (API version 7.23)
  211. [    1.987520] SGI XFS with ACLs, security attributes, realtime, no debug enabled
  212. [    1.995213] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  213. [    1.995441] io scheduler noop registered
  214. [    1.995456] io scheduler deadline registered
  215. [    1.995517] io scheduler cfq registered (default)
  216. [    1.996847] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
  217. [    1.998528] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
  218. [    1.999739] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
  219. [    2.002912] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250
  220. [    2.885079] console [ttyS0] enabled
  221. [    2.890088] [drm] Initialized drm 1.1.0 20060810
  222. [    2.945345] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
  223. [    2.951509] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
  224. [    2.958063] davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe]
  225. [    2.971553] libphy: 4a101000.mdio: probed
  226. [    2.975699] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
  227. [    2.985796] cpsw 4a100000.ethernet: Detected MACID = c8:df:84:d8:8e:8d
  228. [    2.994288] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  229. [    3.001013] ehci-platform: EHCI generic platform driver
  230. [    3.006493] ehci-omap: OMAP-EHCI Host Controller driver
  231. [    3.012187] usbcore: registered new interface driver usb-storage
  232. [    3.019808] 47401300.usb-phy supply vcc not found, using dummy regulator
  233. [    3.029979] 47401b00.usb-phy supply vcc not found, using dummy regulator
  234. [    3.038944] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
  235. [    3.044788] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
  236. [    3.052914] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  237. [    3.059766] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  238. [    3.067040] usb usb1: Product: MUSB HDRC host driver
  239. [    3.072039] usb usb1: Manufacturer: Linux 4.4.9-ti-r25 musb-hcd
  240. [    3.077999] usb usb1: SerialNumber: musb-hdrc.1.auto
  241. [    3.083806] hub 1-0:1.0: USB hub found
  242. [    3.087718] hub 1-0:1.0: 1 port detected
  243. [    3.100790] mousedev: PS/2 mouse device common for all mice
  244. [    3.108797] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
  245. [    3.116847] i2c /dev entries driver
  246. [    3.122012] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  247. [    3.129809] omap_hsmmc 48060000.mmc: Got CD GPIO
  248. [    3.198701] hidraw: raw HID events driver (C) Jiri Kosina
  249. [    3.204959] usbcore: registered new interface driver usbhid
  250. [    3.210600] usbhid: USB HID core driver
  251. [    3.214761] ashmem: initialized
  252. [    3.218970]  remoteproc0: wkup_m3 is available
  253. [    3.223492]  remoteproc0: Note: remoteproc is still under development and considered experimental.
  254. [    3.232522]  remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
  255. [    3.249973] NET: Registered protocol family 10
  256. [    3.257123] mip6: Mobile IPv6
  257. [    3.262249] NET: Registered protocol family 17
  258. [    3.266896] Key type dns_resolver registered
  259. [    3.271227] mpls_gso: MPLS GSO support
  260. [    3.275293] omap_voltage_late_init: Voltage driver support not added
  261. [    3.282596] PM: Cannot get wkup_m3_ipc handle
  262. [    3.287185] ThumbEE CPU extension supported.
  263. [    3.291569] Registering SWP/SWPB emulation handler
  264. [    3.297527] registered taskstats version 1
  265. [    3.301846] zswap: loaded using pool lzo/zbud
  266. [    3.308696] mmc1: MAN_BKOPS_EN bit is not set
  267. [    3.314013] Btrfs loaded
  268. [    3.320800] mmc1: new high speed MMC card at address 0001
  269. [    3.333951] mmcblk0: mmc1:0001 M62704 3.56 GiB
  270. [    3.339472] mmcblk0boot0: mmc1:0001 M62704 partition 1 2.00 MiB
  271. [    3.351419] mmcblk0boot1: mmc1:0001 M62704 partition 2 2.00 MiB
  272. [    3.362927]  mmcblk0: p1
  273. [    3.368616] Key type encrypted registered
  274. [    3.375539] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/input/input0
  275. [    3.406704] tps65217 0-0024: TPS65217 ID 0xe version 1.2
  276. [    3.412610] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  277. [    3.419797] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
  278. [    3.426995] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  279. [    3.434373] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  280. [    3.441686] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  281. [    3.449009] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  282. [    3.455974] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
  283. [    3.462616]  remoteproc0: powering up wkup_m3
  284. [    3.467162]  remoteproc0: Booting fw image am335x-pm-firmware.elf, size 219735
  285. [    3.474713]  remoteproc0: remote processor wkup_m3 is now up
  286. [    3.480406] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x191
  287. [    3.491897] bone_capemgr bone_capemgr: Baseboard: 'A335BNLT,000C,1837BBBG0390'
  288. [    3.499232] bone_capemgr bone_capemgr: compatible-baseboard=ti,beaglebone-black - #slots=4
  289. [    3.545278] bone_capemgr bone_capemgr: slot #0: No cape found
  290. [    3.589273] bone_capemgr bone_capemgr: slot #1: No cape found
  291. [    3.633273] bone_capemgr bone_capemgr: slot #2: No cape found
  292. [    3.677275] bone_capemgr bone_capemgr: slot #3: No cape found
  293. [    3.683156] bone_capemgr bone_capemgr: initialized OK.
  294. [    3.690040] PM: bootloader does not support rtc-only!
  295. [    3.695730] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
  296. [    3.704519] of_cfs_init
  297. [    3.707103] of_cfs_init: OK
  298. [    3.716209] Freeing unused kernel memory: 604K (c0ad3000 - c0b6a000)
  299. Loading, please wait...
  300. [    3.910616] systemd-udevd[104]: starting version 215
  301. [    3.922538] random: systemd-udevd urandom read with 27 bits of entropy available
  302. Begin: Loading essential drivers ... done.
  303. Begin: Running /scripts/init-premount ... done.
  304. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  305. Begin: Running /scripts/local-premount ... done.
  306. Begin: Will now check root file system ... fsck from util-linux 2.25.2
  307. fsck: error 2 (No such file or directory) while executing fsck.ext4 for /dev/mmcblk0p1
  308. fsck exited with status code 8
  309. done.
  310. Warning: File system check failed but did not detect errors
  311. [    9.694663] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
  312. done.
  313. Begin: Running /scripts/local-bottom ... done.
  314. Begin: Running /scripts/init-bottom ... done.
  315. -----------------------------
  316. Starting eMMC Flasher from microSD media
  317. Version: [1.20160222: deal with v4.4.x+ back to old eeprom location...]
  318. -----------------------------
  319. Checking for Valid bbb-eeprom header
  320. Valid bbb-eeprom header found [335]
  321. -----------------------------
  322. copying: [/dev/mmcblk0] -> [/dev/mmcblk1]
  323. lsblk:
  324. NAME         MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
  325. mmcblk0boot0 179:8    0    2M  1 disk
  326. mmcblk0boot1 179:16   0    2M  1 disk
  327. mmcblk0      179:0    0  3.6G  0 disk
  328. `-mmcblk0p1  179:1    0  3.6G  0 part /
  329. -----------------------------
  330. df -h | grep rootfs:
  331. -----------------------------
  332. Error: [/dev/mmcblk1] does not exist
  333. writing to [/dev/mmcblk1] failed...
  334. [   15.313500] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000200
  335. [   15.313500]
  336. [   15.322694] CPU: 0 PID: 1 Comm: init-eMMC-flash Not tainted 4.4.9-ti-r25 #1
  337. [   15.329683] Hardware name: Generic AM33XX (Flattened Device Tree)
  338. [   15.335841] [<c0015b61>] (unwind_backtrace) from [<c00123f5>] (show_stack+0x11/0x14)
  339. [   15.343633] [<c00123f5>] (show_stack) from [<c03c9023>] (dump_stack+0x73/0x80)
  340. [   15.350895] [<c03c9023>] (dump_stack) from [<c00f240d>] (panic+0xbd/0x1e8)
  341. [   15.357807] [<c00f240d>] (panic) from [<c00342dd>] (do_exit+0x7d5/0x7f4)
  342. [   15.364540] [<c00342dd>] (do_exit) from [<c0034355>] (do_group_exit+0x2d/0x8c)
  343. [   15.371794] [<c0034355>] (do_group_exit) from [<c00343c7>] (SyS_exit_group+0x13/0x14)
  344. [   15.379667] [<c00343c7>] (SyS_exit_group) from [<c000ec41>] (ret_fast_syscall+0x1/0x52)
  345. [   15.387717] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000200
  346. [   15.387717]
  347. [   29.325285] random: nonblocking pool is initialized
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top