API tools faq
paste
Advertisement
RobertBerger

3.9.4-x2

RobertBerger
May 30th, 2013
235
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 20.87 KB | None | 0 0
raw download clone embed print report
  1. OMAP3 beagleboard.org # setenv kernel_addr_r '0x80000000'
  2. OMAP3 beagleboard.org # setenv fdt_addr_r '0x85000000'
  3. OMAP3 beagleboard.org # setenv tftp_bootfile 'beagle-xm/uImage'
  4. OMAP3 beagleboard.org # setenv fdt_file 'beagle-xm/omap3-beagle-xm-rob-patched.dtb'
  5. OMAP3 beagleboard.org # setenv fdtargs 'tftp ${kernel_addr_r} ${tftp_bootfile}; tftp ${fdt_addr_r} ${fdt_file};'
  6. OMAP3 beagleboard.org # setenv bootcmd 'fdt addr ${fdt_addr_r}; fdt resize; bootm ${kernel_addr_r} - ${fdt_addr_r}'
  7. OMAP3 beagleboard.org # setenv bootargs 'console=ttyO2,115200n8 ip=192.168.2.54:192.168.2.232:192.168.2.54:255.255.255.0::eth0 nfsroot=192.168.2.232:/opt/eldk-5.3/armv7a/rootfs-sato-sdk'
  8. OMAP3 beagleboard.org # setenv netup 'dcache off; setenv usbethaddr 0:0:1:2:3:81; setenv ipaddr 192.168.2.54; setenv serverip 192.168.2.232; setenv netmask 255.255.255.0; usb start'
  9. OMAP3 beagleboard.org # run netup
  10. (Re)start USB...
  11. USB0: USB EHCI 1.00
  12. scanning bus 0 for devices... 3 USB Device(s) found
  13. scanning usb for storage devices... 0 Storage Device(s) found
  14. scanning usb for ethernet devices... 1 Ethernet Device(s) found
  15. OMAP3 beagleboard.org # ping $serverip
  16. ERROR: Need valid 'usbnet_devaddr' to be set
  17. at ether.c:2369/usb_eth_init()
  18. Waiting for Ethernet connection... done.
  19. Using sms0 device
  20. host 192.168.2.232 is alive
  21. OMAP3 beagleboard.org # run fdtargs
  22. Waiting for Ethernet connection... done.
  23. Using sms0 device
  24. TFTP from server 192.168.2.232; our IP address is 192.168.2.54
  25. Filename 'beagle-xm/uImage'.
  26. Load address: 0x80000000
  27. Loading: #################################################################
  28. #################################################################
  29. #################################################################
  30. #################################################################
  31. ##########
  32. 1.2 MiB/s
  33. done
  34. Bytes transferred = 3961112 (3c7118 hex)
  35. Waiting for Ethernet connection... done.
  36. Using sms0 device
  37. TFTP from server 192.168.2.232; our IP address is 192.168.2.54
  38. Filename 'beagle-xm/omap3-beagle-xm-rob-patched.dtb'.
  39. Load address: 0x85000000
  40. Loading: #
  41. 649.4 KiB/s
  42. done
  43. Bytes transferred = 8647 (21c7 hex)
  44. OMAP3 beagleboard.org # boot [246/9384]
  45. ## Booting kernel from Legacy Image at 80000000 ...
  46. Image Name: Linux-3.9.4-x2
  47. Image Type: ARM Linux Kernel Image (uncompressed)
  48. Data Size: 3961048 Bytes = 3.8 MiB
  49. Load Address: 80008000
  50. Entry Point: 80008000
  51. Verifying Checksum ... OK
  52. ## Flattened Device Tree blob at 85000000
  53. Booting using the fdt blob at 0x85000000
  54. Loading Kernel Image ... OK
  55. OK
  56. reserving fdt memory region: addr=85000000 size=3000
  57. Loading Device Tree to 8fffa000, end 8fffffff ... OK
  58.  
  59. Starting kernel ...
  60.  
  61. [ 0.000000] Booting Linux on physical CPU 0x0
  62. [ 0.000000] Initializing cgroup subsys cpuset
  63. [ 0.000000] Initializing cgroup subsys cpu
  64. [ 0.000000] Linux version 3.9.4-x2 (student@vlab2-ldd-20-dev) (gcc version 4.7.2 (GCC) ) #1 SMP Thu May 30 13:12:14 EEST 2013
  65. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  66. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  67. [ 0.000000] Machine: Generic OMAP3 (Flattened Device Tree), model: TI OMAP3 BeagleBoard xM
  68. [ 0.000000] cma: CMA: reserved 16 MiB at 9e800000
  69. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  70. [ 0.000000] CPU: All CPU(s) started in SVC mode.
  71. [ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
  72. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1152000 s13760 r8192 d14912 u36864
  73. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
  74. [ 0.000000] Kernel command line: console=ttyO2,115200n8 ip=192.168.2.54:192.168.2.232:192.168.2.54:255.255.255.0::eth0 nfsroot=192.168.2.232:/opt/eldk-5.3/armv7a/rootf
  75. s-sato-sdk
  76. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  77. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  78. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  79. [ 0.000000] __ex_table already sorted, skipping sort
  80. [ 0.000000] allocated 1048576 bytes of page_cgroup
  81. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  82. [ 0.000000] Memory: 511MB = 511MB total
  83. [ 0.000000] Memory: 487616k/487616k available, 36672k reserved, 0K highmem
  84. [ 0.000000] Virtual kernel memory layout:
  85. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  86. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  87. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  88. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  89. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  90. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  91. [ 0.000000] .text : 0xc0008000 - 0xc0b2c2cc (11409 kB) [199/9384]
  92. [ 0.000000] .init : 0xc0b2d000 - 0xc0b935c0 ( 410 kB)
  93. [ 0.000000] .data : 0xc0b94000 - 0xc0c5d1b8 ( 805 kB)
  94. [ 0.000000] .bss : 0xc0c5d1b8 - 0xc0d48bc8 ( 943 kB)
  95. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  96. [ 0.000000] Hierarchical RCU implementation.
  97. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
  98. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  99. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  100. [ 0.000000] Total of 96 interrupts on 1 active controller
  101. [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
  102. [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
  103. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  104. [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
  105. [ 0.000000] Console: colour dummy device 80x30
  106. [ 0.000213] Calibrating delay loop... 398.13 BogoMIPS (lpj=1990656)
  107. [ 0.049957] pid_max: default: 32768 minimum: 301
  108. [ 0.050140] Security Framework initialized
  109. [ 0.050201] AppArmor: AppArmor initialized
  110. [ 0.050415] Mount-cache hash table entries: 512
  111. [ 0.054138] Initializing cgroup subsys cpuacct
  112. [ 0.054168] Initializing cgroup subsys memory
  113. [ 0.054199] Initializing cgroup subsys devices
  114. [ 0.054229] Initializing cgroup subsys freezer
  115. [ 0.054229] Initializing cgroup subsys blkio
  116. [ 0.054260] Initializing cgroup subsys perf_event
  117. [ 0.054382] CPU: Testing write buffer coherency: ok
  118. [ 0.054809] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  119. [ 0.054870] Setting up static identity map for 0xc071e188 - 0xc071e1e0
  120. [ 0.056060] Brought up 1 CPUs
  121. [ 0.056091] SMP: Total of 1 processors activated (398.13 BogoMIPS).
  122. [ 0.056091] CPU: All CPU(s) started in SVC mode.
  123. [ 0.057006] devtmpfs: initialized
  124. [ 0.099517] xor: measuring software checksum speed
  125. [ 0.189605] arm4regs : 745.200 MB/sec
  126. [ 0.289398] 8regs : 542.400 MB/sec
  127. [ 0.389190] 32regs : 744.400 MB/sec
  128. [ 0.389190] xor: using function: arm4regs (745.200 MB/sec)
  129. [ 0.389221] pinctrl core: initialized pinctrl subsystem
  130. [ 0.389801] regulator-dummy: no parameters
  131. [ 0.391326] NET: Registered protocol family 16
  132. [ 0.394866] DMA: preallocated 256 KiB pool for atomic coherent allocations
  133. [ 0.402160] Reprogramming SDRC clock to 400000000 Hz
  134. [ 0.404113] OMAP GPIO hardware version 2.5
  135. [ 0.411437] platform 49022000.mcbsp: alias fck already exists
  136. [ 0.411834] platform 49024000.mcbsp: alias fck already exists
  137. [ 0.415252] No ATAGs?
  138. [ 0.415283] hw-breakpoint: debug architecture 0x4 unsupported. [152/9384]
  139. [ 0.415557] Could not look up dss_hdmi hw_mod
  140. [ 0.416900] OMAP DMA hardware revision 5.0
  141. [ 0.418029] arm-pmu: alias fck already exists
  142. [ 0.428985] bio: create slab <bio-0> at 0
  143. [ 0.599334] raid6: int32x1 96 MB/s
  144. [ 0.768585] raid6: int32x2 121 MB/s
  145. [ 0.938293] raid6: int32x4 107 MB/s
  146. [ 1.107879] raid6: int32x8 100 MB/s
  147. [ 1.107910] raid6: using algorithm int32x2 (121 MB/s)
  148. [ 1.107910] raid6: using intx1 recovery algorithm
  149. [ 1.123718] omap-dma-engine omap-dma-engine: OMAP DMA engine driver
  150. [ 1.126373] SCSI subsystem initialized
  151. [ 1.127105] usbcore: registered new interface driver usbfs
  152. [ 1.127197] usbcore: registered new interface driver hub
  153. [ 1.127380] usbcore: registered new device driver usb
  154. [ 1.128173] omap_i2c i2c.13: did not get pins for i2c error: -19
  155. [ 1.128662] omap_i2c i2c.13: bus 0 rev4.4 at 2600 kHz
  156. [ 1.133514] twl 0-0048: PIH (irq 23) chaining IRQs 336..344
  157. [ 1.133666] twl 0-0048: power (irq 341) chaining IRQs 344..351
  158. [ 1.135467] VDAC: 1800 mV
  159. [ 1.136505] VPLL2: 1800 mV
  160. [ 1.137329] VMMC1: 1850 <--> 3150 mV at 3150 mV
  161. [ 1.138122] VUSB1V5: 1500 mV
  162. [ 1.138732] VUSB1V8: 1800 mV
  163. [ 1.139312] VUSB3V1: 3100 mV
  164. [ 1.140014] VSIM: 1800 <--> 3000 mV at 1800 mV
  165. [ 1.141143] twl4030_gpio gpio.35: gpio (irq 336) chaining IRQs 352..369
  166. [ 1.143432] twl4030_usb twl4030-usb.36: Initialized TWL4030 USB module
  167. [ 1.143615] omap_i2c i2c.14: did not get pins for i2c error: -19
  168. [ 1.144073] omap_i2c i2c.14: bus 1 rev4.4 at 400 kHz
  169. [ 1.144195] omap_i2c i2c.15: did not get pins for i2c error: -19
  170. [ 1.144622] omap_i2c i2c.15: bus 2 rev4.4 at 100 kHz
  171. [ 1.145507] media: Linux media interface: v0.10
  172. [ 1.145599] Linux video capture interface: v2.00
  173. [ 1.145690] pps_core: LinuxPPS API ver. 1 registered
  174. [ 1.145721] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  175. [ 1.145751] PTP clock support registered
  176. [ 1.146240] omap-iommu omap-iommu.0: mmu_isp registered
  177. [ 1.146697] Advanced Linux Sound Architecture Driver Initialized.
  178. [ 1.147460] NetLabel: Initializing
  179. [ 1.147491] NetLabel: domain hash size = 128
  180. [ 1.147491] NetLabel: protocols = UNLABELED CIPSOv4
  181. [ 1.147552] NetLabel: unlabeled traffic allowed by default
  182. [ 1.147857] Switching to clocksource 32k_counter
  183. [ 1.173522] AppArmor: AppArmor Filesystem Enabled
  184. [ 1.187499] NET: Registered protocol family 2
  185. [ 1.188537] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [105/9384]
  186. [ 1.188659] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  187. [ 1.188751] TCP: Hash tables configured (established 4096 bind 4096)
  188. [ 1.188842] TCP: reno registered
  189. [ 1.188842] UDP hash table entries: 256 (order: 1, 8192 bytes)
  190. [ 1.188873] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  191. [ 1.189331] NET: Registered protocol family 1
  192. [ 1.189880] RPC: Registered named UNIX socket transport module.
  193. [ 1.189910] RPC: Registered udp transport module.
  194. [ 1.189910] RPC: Registered tcp transport module.
  195. [ 1.189910] RPC: Registered tcp NFSv4.1 backchannel transport module.
  196. [ 1.190948] CPU PMU: probing PMU on CPU 0
  197. [ 1.190979] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  198. [ 1.194305] audit: initializing netlink socket (disabled)
  199. [ 1.194396] type=2000 audit(1.190:1): initialized
  200. [ 1.495178] VFS: Disk quotas dquot_6.5.2
  201. [ 1.495605] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  202. [ 1.499145] NFS: Registering the id_resolver key type
  203. [ 1.499267] Key type id_resolver registered
  204. [ 1.499267] Key type id_legacy registered
  205. [ 1.499328] fuse init (API version 7.21)
  206. [ 1.501922] Btrfs loaded
  207. [ 1.502258] msgmni has been set to 984
  208. [ 1.504638] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  209. [ 1.504669] io scheduler noop registered
  210. [ 1.504699] io scheduler deadline registered
  211. [ 1.504913] io scheduler cfq registered (default)
  212. [ 1.515991] pinctrl-single 48002030.pinmux: 742 pins at pa fa002030 size 1484
  213. [ 1.516937] pinctrl-single 48002a58.pinmux: 46 pins at pa fa002a58 size 92
  214. [ 1.519836] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  215. [ 1.521545] omap_uart serial.10: did not get pins for uart0 error: -19
  216. [ 1.521820] serial.10: ttyO0 at MMIO 0x4806a000 (irq = 88) is a OMAP UART0
  217. [ 1.522277] omap_uart serial.11: did not get pins for uart1 error: -19
  218. [ 1.522460] serial.11: ttyO1 at MMIO 0x4806c000 (irq = 89) is a OMAP UART1
  219. [ 1.522888] omap_uart serial.12: did not get pins for uart2 error: -19
  220. [ 1.523071] serial.12: ttyO2 at MMIO 0x49020000 (irq = 90) is a OMAP UART2
  221. [ 2.418212] console [ttyO2] enabled
  222. [ 2.422546] omap_uart serial.22: did not get pins for uart3 error: -19
  223. [ 2.429840] serial.22: ttyO3 at MMIO 0x49042000 (irq = 96) is a OMAP UART3
  224. [ 2.437835] [drm] Initialized drm 1.1.0 20060810
  225. [ 2.453613] brd: module loaded
  226. [ 2.462738] loop: module loaded
  227. [ 2.469726] OneNAND driver initializing
  228. [ 2.474151] omap2_mcspi spi.16: pins are not configured from the driver
  229. [ 2.481658] omap2_mcspi spi.17: pins are not configured from the driver
  230. [ 2.489074] omap2_mcspi spi.18: pins are not configured from the driver
  231. [ 2.496398] omap2_mcspi spi.19: pins are not configured from the driver
  232. [ 2.504302] usbcore: registered new interface driver ax88179_178a [58/9384]
  233. [ 2.510833] usbcore: registered new interface driver cdc_ether
  234. [ 2.517059] usbcore: registered new interface driver smsc95xx
  235. [ 2.523223] usbcore: registered new interface driver rndis_host
  236. [ 2.529632] usbcore: registered new interface driver cdc_ncm
  237. [ 2.536437] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  238. [ 2.543487] Initializing USB Mass Storage driver...
  239. [ 2.548767] usbcore: registered new interface driver usb-storage
  240. [ 2.555084] USB Mass Storage support registered.
  241. [ 2.559997] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
  242. [ 2.566864] mousedev: PS/2 mouse device common for all mice
  243. [ 2.574157] twl_rtc rtc.26: Power up reset detected.
  244. [ 2.579620] twl_rtc rtc.26: Enabling TWL-RTC
  245. [ 2.586059] twl_rtc rtc.26: rtc core: registered rtc.26 as rtc0
  246. [ 2.593170] i2c /dev entries driver
  247. [ 2.597686] lirc_dev: IR Remote Control driver registered, major 244
  248. [ 2.604644] smssdio: Siano SMS1xxx SDIO driver
  249. [ 2.609374] smssdio: Copyright Pierre Ossman
  250. [ 2.613922] Driver for 1-wire Dallas network protocol.
  251. [ 2.620361] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  252. [ 2.628906] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
  253. [ 2.637847] cpu0 supply vcc not found, using dummy regulator
  254. [ 2.643951] omap_cpufreq_init: physical regulator not present for MPU
  255. [ 2.651031] cpuidle: using governor ladder
  256. [ 2.655364] cpuidle: using governor menu
  257. [ 2.659606] sdhci: Secure Digital Host Controller Interface driver
  258. [ 2.666107] sdhci: Copyright(c) Pierre Ossman
  259. [ 2.671386] of_dma_request_slave_channel: dma-names property missing or empty
  260. [ 2.679016] omap-dma-engine omap-dma-engine: allocating channel for 62
  261. [ 2.685913] of_dma_request_slave_channel: dma-names property missing or empty
  262. [ 2.693481] omap-dma-engine omap-dma-engine: allocating channel for 61
  263. [ 2.701873] omap_hsmmc mmc.20: pins are not configured from the driver
  264. [ 2.748657] leds-gpio leds.23: pins are not configured from the driver
  265. [ 2.757202] ledtrig-cpu: registered to indicate activity on CPUs
  266. [ 2.763702] hidraw: raw HID events driver (C) Jiri Kosina
  267. [ 2.770904] usbcore: registered new interface driver usbhid
  268. [ 2.776794] usbhid: USB HID core driver
  269. [ 2.783721] ashmem: initialized
  270. [ 2.825225] mmc0: host does not support reading read-only switch. assuming write-enable.
  271. [ 2.835754] mmc0: new high speed SDHC card at address b368
  272. [ 2.842559] mmcblk0: mmc0:b368 USD 7.46 GiB
  273. [ 2.849456] mmcblk0: p1 p2 p3
  274. [ 2.877593] omap-twl4030 sound.24: twl4030-hifi <-> 49022000.mcbsp mapping ok
  275. [ 2.887603] oprofile: using arm/armv7
  276. [ 2.892089] TCP: cubic registered
  277. [ 2.896270] NET: Registered protocol family 10
  278. [ 2.902252] NET: Registered protocol family 17
  279. [ 2.907257] Key type dns_resolver registered [11/9384]
  280. [ 2.911987] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  281. [ 2.920898] ThumbEE CPU extension supported.
  282. [ 2.925445] Registering SWP/SWPB emulation handler
  283. [ 2.930633] SmartReflex Class3 initialized
  284. [ 2.935760] registered taskstats version 1
  285. [ 2.940399] Unable to handle kernel NULL pointer dereference at virtual address 00000014
  286. [ 2.948974] pgd = c0004000
  287. [ 2.951843] [00000014] *pgd=00000000
  288. [ 2.955627] Internal error: Oops: 5 [#1] SMP ARM
  289. [ 2.960479] Modules linked in:
  290. [ 2.963714] CPU: 0 Not tainted (3.9.4-x2 #1)
  291. [ 2.968597] PC is at dss_feat_get_num_ovls+0x8/0x14
  292. [ 2.973754] LR is at omapdss_compat_init+0x30/0x2bc
  293. [ 2.978912] pc : [<c03a53a4>] lr : [<c03b2d2c>] psr: 60000113
  294. [ 2.978912] sp : de055e18 ip : 00000000 fp : 00000000
  295. [ 2.990997] r10: c0b588f4 r9 : 00000000 r8 : c0ba3638
  296. [ 2.996490] r7 : c0d37b50 r6 : c0bfc074 r5 : 00000000 r4 : de01d010
  297. [ 3.003387] r3 : 00000000 r2 : 00000001 r1 : 40000113 r0 : c0bfbd00
  298. [ 3.010253] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
  299. [ 3.017974] Control: 10c5387d Table: 80004019 DAC: 00000015
  300. [ 3.024017] Process swapper/0 (pid: 1, stack limit = 0xde054240)
  301. [ 3.030364] Stack: (0xde055e18 to 0xde056000)
  302. [ 3.034942] 5e00: de01d010 c0d3823c
  303. [ 3.043579] 5e20: c0bfc074 c0ba3648 c0ba3638 00000000 c0b588f4 c0b589d4 00000000 de3428c0
  304. [ 3.052185] 5e40: de3429c0 de3429c0 de055e78 c0179618 de050000 00000000 de3429c0 de0cdb80
  305. [ 3.060821] 5e60: de33f400 c017a290 ffffffff c00602c8 00000000 00000003 de0cdb80 00000000
  306. [ 3.069427] 5e80: c0bfc074 c0ba3648 00000000 c0bfc074 c04180bc 00000108 00000000 c0b588f4
  307. [ 3.078063] 5ea0: 00000000 c04190e8 c04190d4 c0417f70 c0ba3648 c0ba367c c0bfc074 c0418124
  308. [ 3.086700] 5ec0: 00000000 de055ed0 c0bfc074 c041677c de031258 de0cb434 c0bfc074 c0bfc074
  309. [ 3.095306] 5ee0: de33f400 c0c05870 00000000 c0417714 c09f6acc c09f6acc c0bfc074 c0b7669c
  310. [ 3.103942] 5f00: c0b8f81c c0c5d200 00000108 c0418618 00000000 c0bfc060 c0b7669c c0b8f81c
  311. [ 3.112579] 5f20: c0c5d200 00000108 c0b588f4 c04192d8 00000007 c0b7669c c0b8f81c c0b5891c
  312. [ 3.121185] 5f40: de054000 c00087b8 c0b588f4 00000002 c0b8f85c 00000008 00000007 c0b7669c
  313. [ 3.129821] 5f60: c0b8f81c c0c5d200 00000108 c0b2d274 c0b766a4 c0b2d988 00000007 00000007
  314. [ 3.138458] 5f80: c0b2d274 00000000 00000000 c070b524 00000000 00000000 00000000 00000000
  315. [ 3.147064] 5fa0: 00000000 c070b52c 00000000 c000d8d8 00000000 00000000 00000000 00000000
  316. [ 3.155700] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  317. [ 3.164306] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 9ffffff5 ffffddff
  318. [ 3.172973] [<c03a53a4>] (dss_feat_get_num_ovls+0x8/0x14) from [<c03b2d2c>] (omapdss_compat_init+0x30/0x2bc)
  319. [ 3.183349] [<c03b2d2c>] (omapdss_compat_init+0x30/0x2bc) from [<c0b589d4>] (omapfb_probe+0x8c/0x788)
  320. [ 3.193084] [<c0b589d4>] (omapfb_probe+0x8c/0x788) from [<c04190e8>] (platform_drv_probe+0x14/0x18)
  321. [ 3.202636] [<c04190e8>] (platform_drv_probe+0x14/0x18) from [<c0417f70>] (driver_probe_device+0xac/0x1f8)
  322. [ 3.212799] [<c0417f70>] (driver_probe_device+0xac/0x1f8) from [<c0418124>] (__driver_attach+0x68/0x8c)
  323. [ 3.222717] [<c0418124>] (__driver_attach+0x68/0x8c) from [<c041677c>] (bus_for_each_dev+0x50/0x88)
  324. [ 3.232269] [<c041677c>] (bus_for_each_dev+0x50/0x88) from [<c0417714>] (bus_add_driver+0xdc/0x22c)
  325. [ 3.241821] [<c0417714>] (bus_add_driver+0xdc/0x22c) from [<c0418618>] (driver_register+0x9c/0x12c)
  326. [ 3.251373] [<c0418618>] (driver_register+0x9c/0x12c) from [<c04192d8>] (platform_driver_probe+0x18/0xa0)
  327. [ 3.261474] [<c04192d8>] (platform_driver_probe+0x18/0xa0) from [<c0b5891c>] (omapfb_init+0x28/0x54)
  328. [ 3.271118] [<c0b5891c>] (omapfb_init+0x28/0x54) from [<c00087b8>] (do_one_initcall+0x90/0x160)
  329. [ 3.280303] [<c00087b8>] (do_one_initcall+0x90/0x160) from [<c0b2d988>] (kernel_init_freeable+0x160/0x22c)
  330. [ 3.290496] [<c0b2d988>] (kernel_init_freeable+0x160/0x22c) from [<c070b52c>] (kernel_init+0x8/0xe4)
  331. [ 3.300140] [<c070b52c>] (kernel_init+0x8/0xe4) from [<c000d8d8>] (ret_from_fork+0x14/0x3c)
  332. [ 3.308929] Code: e12fff1e c0d36af8 e59f3008 e5933000 (e5930014)
  333. [ 3.315460] ---[ end trace f1765fff8c6502ed ]---
  334. [ 3.320404] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
  335. [ 3.320404]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!