API tools faq
paste
Advertisement
Gazzeh

Bmw E46 M3 coilovers

Gazzeh
Oct 28th, 2015
132
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 6.24 KB | None | 0 0
raw download clone embed print report
  1. BMW E46 M3 coilovers---
  2.  
  3. 2015-10-28 15:37:38 ✪ Richard Hawkins rolls their windows up.
  4. 2015-10-28 15:39:35 ★ Richard Hawkins opens the door of the BMW as he then sits inot it and bends forwards as he tries to pull
  5. 2015-10-28 15:39:46 ★ the lever to open the hood of the BMW. ((Richard Hawkins))
  6. 2015-10-28 15:42:07 ★ the hood of the car would slightly pop up as he then steps out of the car and shuts the door ((Richard Hawkins))
  7. 2015-10-28 15:44:44 ★ Richard Hawkins would then make his way to the front of the car and slides is fingers under the hood of the
  8. 2015-10-28 15:45:07 ★ car and flicks a switch as he then opens the hood . ((Richard Hawkins))
  9. 2015-10-28 15:47:48 ★ Richard Hawkins would then walk to the wall of the garage as he then bends down and picks up his toolbox
  10. 2015-10-28 15:48:59 ★ with his right hand. ((Richard Hawkins))
  11. 2015-10-28 15:49:57 ★ Richard Hawkins would then stand up as he then walks over to the E46
  12. 2015-10-28 15:51:33 ★ Richard Hawkins would then bend down and places the toolbox back onto the floor
  13. 2015-10-28 15:51:58 ★ he would then stand back up and walk over to the control panel of the lift, he would then ((Richard Hawkins))
  14. 2015-10-28 15:52:21 ★ raise the lift. ((Richard Hawkins))
  15. 2015-10-28 15:52:45 ★ Richard Hawkins would then walk to the back of the car as he then bends down and picks up 4 plastic
  16. 2015-10-28 15:53:14 ★ pads, he would then place one of the pads to each side of the sideskirts. ((Richard Hawkins))
  17. 2015-10-28 15:53:55 ★ Richard Hawkins would then walk over to the control panel again and presses another button to raise the
  18. 2015-10-28 15:54:01 ★ middle part of the lift. ((Richard Hawkins))
  19. 2015-10-28 15:54:37 ★ all 4 wheels would be off the ground now. ((Richard Hawkins))
  20. 2015-10-28 15:55:23 ★ Richard Hawkins would then bend down to the toolbox as he then opens it and digs around for the breaker bar.
  21. 2015-10-28 15:56:21 ★ Richard Hawkins would then grab the breaker bar with his right hand and a 19mm socket with his left one.
  22. 2015-10-28 15:56:47 ★ Richard Hawkins would then connect the two as he then places the socket to the head of the bolt.
  23. 2015-10-28 15:57:28 ★ Richard Hawkins would unscrew all 5 of the bolts as he then places the breaker bar onto the lift.
  24. 2015-10-28 15:57:55 ★ Richard Hawkins would then grab the rim with both of his hands and lifts it away from the wheel hub.
  25. 2015-10-28 15:58:22 ★ he would then lower the wheel onto the ground as he then pushes it to the wall of the garage ((Richard Hawkins))
  26. 2015-10-28 15:59:01 ★ Richard Hawkins would then walk back to the car and bends down to his toolbox and takes out his
  27. 2015-10-28 15:59:25 ★ socket wrench with a 17mm socket, he would then connect the two. ((Richard Hawkins))
  28. 2015-10-28 16:00:49 ★ Richard Hawkins would then stand back up as he then leans in towards the wheel hub and starts to unscrew the
  29. 2015-10-28 16:00:56 ★ nut from the sway bar. ((Richard Hawkins))
  30. 2015-10-28 16:01:20 ★ after he has unscrewed one of the nuts, he continues with the lower one, completely ((Richard Hawkins))
  31. 2015-10-28 16:01:30 ★ removing the sway bar. ((Richard Hawkins))
  32. 2015-10-28 16:02:05 ★ Richard Hawkins would then place both of the nuts into his pocket and the sway bar onto the lift.
  33. 2015-10-28 16:02:55 ★ Richard Hawkins would then walk to the front of the car as he then leans in towards the engine bay
  34. 2015-10-28 16:04:26 ★ Richard Hawkins would then use the same 17mm socket to undo all 3 nuts of the shock absorbers cap.
  35. 2015-10-28 16:04:45 ★ Richard Hawkins would then place the nuts into his pockets and walks back to the wheel hub.
  36. 2015-10-28 16:05:27 ★ Richard Hawkins would then lean in towards the wheel hub again as he places his socket wrench
  37. 2015-10-28 16:06:24 ★ against the nuts holding the coilover against the front steering knuckle. ((Richard Hawkins))
  38. 2015-10-28 16:06:55 ★ Richard Hawkins would then undo both of the bolts and nuts and places them into his pocket as he then pushes
  39. 2015-10-28 16:07:16 ★ the steering knuckle down with the weight of his body and tries to slide out the coilover. ((Richard Hawkins))
  40. 2015-10-28 16:07:54 ★ Richard Hawkins would then walk to the toolstation that is in the garage as he then picks up a new coilover
  41. 2015-10-28 16:08:25 ★ for BMW e46 M3, and takes it back to the front of the car. ((Richard Hawkins))
  42. 2015-10-28 16:09:19 ★ Richard Hawkins would then slide the coilover into the slots of the engne bay and rests it against the
  43. 2015-10-28 16:09:23 ★ steeringknuckle ((Richard Hawkins))
  44. 2015-10-28 16:10:01 ★ Richard Hawkins would then walk to the front of the car as he then screwes on and tightens all 3 of the nuts
  45. 2015-10-28 16:10:11 ★ to hold the coilover in place. ((Richard Hawkins))
  46. 2015-10-28 16:10:33 ★ Richard Hawkins would then walk back to the wheel hub as he then pushes the steering knuckle down
  47. 2015-10-28 16:11:11 ★ and slides on the bolts that connect the coilover to the steering knuckle. ((Richard Hawkins))
  48. 2015-10-28 16:11:34 ★ Richard Hawkins would then tighten the bolts and nuts as he then sets the coilover to the lowest setting.
  49. 2015-10-28 16:12:00 ★ Richard Hawkins would then walk to the side of the garage as he picks up the wheel of the BMW and takes it
  50. 2015-10-28 16:12:08 ★ to the wheel hub. ((Richard Hawkins))
  51. 2015-10-28 16:12:37 ★ Richard Hawkins would then lift the wheel up and pushes it into position and rolls on the bolts with his han
  52. 2015-10-28 16:12:39 ★ hands. ((Richard Hawkins))
  53. 2015-10-28 16:13:05 ★ Richard Hawkins would then bend down to the toolbox as he then picks up a torque bar and attatches the 19mm
  54. 2015-10-28 16:13:23 ★ socket to it, and stands back up and tightens all 5 of the wheel bolts. ((Richard Hawkins))
  55. 2015-10-28 16:13:53 ★ Richard Hawkins would repeat the same actions on the BMW till he has changed all 4 coilovers.
  56. 2015-10-28 16:14:21 ★ Richard Hawkins would then walk to the fornt of the car and closes the hood and then collects all his tools
  57. 2015-10-28 16:14:39 ★ and puts them into the toolbox and takes the toolbox back to the toolstation. ((Richard Hawkins))
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!