Advertisement
KOT040188

dmesg

Oct 31st, 2015
95
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. 11)
  2. [ 0.000000] ACPI: UEFI 00000000d9533770 000042 (v01 ALASKA A M I 01072009 00000000)
  3. [ 0.000000] ACPI: DMAR 00000000d95337b8 0000B8 (v01 INTEL BDW 00000001 INTL 00000001)
  4. [ 0.000000] ACPI: Local APIC address 0xfee00000
  5. [ 0.000000] No NUMA configuration found
  6. [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
  7. [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41fdfffff]
  8. [ 0.000000] NODE_DATA [mem 0x41fdf6000-0x41fdfafff]
  9. [ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f400000-ffff88041f3fffff] on node 0
  10. [ 0.000000] Zone ranges:
  11. [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
  12. [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
  13. [ 0.000000] Normal [mem 0x100000000-0x41fdfffff]
  14. [ 0.000000] Movable zone start for each node
  15. [ 0.000000] Early memory node ranges
  16. [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
  17. [ 0.000000] node 0: [mem 0x00100000-0xd379efff]
  18. [ 0.000000] node 0: [mem 0xd37a6000-0xd3bf3fff]
  19. [ 0.000000] node 0: [mem 0xd4205000-0xd8f9cfff]
  20. [ 0.000000] node 0: [mem 0xd9009000-0xd9114fff]
  21. [ 0.000000] node 0: [mem 0xd9fff000-0xd9ffffff]
  22. [ 0.000000] node 0: [mem 0x100000000-0x41fdfffff]
  23. [ 0.000000] On node 0 totalpages: 4163630
  24. [ 0.000000] DMA zone: 64 pages used for memmap
  25. [ 0.000000] DMA zone: 21 pages reserved
  26. [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
  27. [ 0.000000] DMA32 zone: 13803 pages used for memmap
  28. [ 0.000000] DMA32 zone: 883346 pages, LIFO batch:31
  29. [ 0.000000] Normal zone: 51192 pages used for memmap
  30. [ 0.000000] Normal zone: 3276288 pages, LIFO batch:31
  31. [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
  32. [ 0.000000] ACPI: Local APIC address 0xfee00000
  33. [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  34. [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
  35. [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
  36. [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
  37. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
  38. [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
  39. [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
  40. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  41. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  42. [ 0.000000] ACPI: IRQ0 used by override.
  43. [ 0.000000] ACPI: IRQ2 used by override.
  44. [ 0.000000] ACPI: IRQ9 used by override.
  45. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  46. [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
  47. [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
  48. [ 0.000000] nr_irqs_gsi: 40
  49. [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
  50. [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
  51. [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
  52. [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
  53. [ 0.000000] PM: Registered nosave memory: [mem 0xd379f000-0xd37a5fff]
  54. [ 0.000000] PM: Registered nosave memory: [mem 0xd3bf4000-0xd4204fff]
  55. [ 0.000000] PM: Registered nosave memory: [mem 0xd8f9d000-0xd9008fff]
  56. [ 0.000000] PM: Registered nosave memory: [mem 0xd9115000-0xd954ffff]
  57. [ 0.000000] PM: Registered nosave memory: [mem 0xd9550000-0xd9ffefff]
  58. [ 0.000000] PM: Registered nosave memory: [mem 0xda000000-0xdaffffff]
  59. [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf1fffff]
  60. [ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
  61. [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
  62. [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
  63. [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
  64. [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
  65. [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
  66. [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
  67. [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
  68. [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
  69. [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
  70. [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
  71. [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
  72. [ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
  73. [ 0.000000] Booting paravirtualized kernel on bare hardware
  74. [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
  75. [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88041fa00000 s81536 r8192 d20864 u524288
  76. [ 0.000000] pcpu-alloc: s81536 r8192 d20864 u524288 alloc=1*2097152
  77. [ 0.000000] pcpu-alloc: [0] 0 1 2 3
  78. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4098550
  79. [ 0.000000] Policy zone: Normal
  80. [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-66-generic root=UUID=c3524edf-23da-4a33-a094-f74b8f07a59c ro quiet splash vt.handoff=7
  81. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  82. [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
  83. [ 0.000000] Checking aperture...
  84. [ 0.000000] No AGP bridge found
  85. [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
  86. [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
  87. [ 0.000000] Memory: 16282040K/16654520K available (7396K kernel code, 1146K rwdata, 3416K rodata, 1336K init, 1448K bss, 372480K reserved)
  88. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  89. [ 0.000000] Hierarchical RCU implementation.
  90. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  91. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
  92. [ 0.000000] Offload RCU callbacks from all CPUs
  93. [ 0.000000] Offload RCU callbacks from CPUs: 0-3.
  94. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16
  95. [ 0.000000] spurious 8259A interrupt: IRQ7.
  96. [ 0.000000] Console: colour dummy device 80x25
  97. [ 0.000000] console [tty0] enabled
  98. [ 0.000000] allocated 67108864 bytes of page_cgroup
  99. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  100. [ 0.000000] hpet clockevent registered
  101. [ 0.000000] tsc: Fast TSC calibration using PIT
  102. [ 0.004000] tsc: Detected 3500.155 MHz processor
  103. [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 7000.31 BogoMIPS (lpj=14000620)
  104. [ 0.000003] pid_max: default: 32768 minimum: 301
  105. [ 0.000020] Security Framework initialized
  106. [ 0.000031] AppArmor: AppArmor initialized
  107. [ 0.000032] Yama: becoming mindful.
  108. [ 0.000701] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
  109. [ 0.002783] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  110. [ 0.003664] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
  111. [ 0.003675] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
  112. [ 0.003836] Initializing cgroup subsys memory
  113. [ 0.003840] Initializing cgroup subsys devices
  114. [ 0.003841] Initializing cgroup subsys freezer
  115. [ 0.003842] Initializing cgroup subsys blkio
  116. [ 0.003843] Initializing cgroup subsys perf_event
  117. [ 0.003844] Initializing cgroup subsys hugetlb
  118. [ 0.003859] CPU: Physical Processor ID: 0
  119. [ 0.003859] CPU: Processor Core ID: 0
  120. [ 0.004794] mce: CPU supports 9 MCE banks
  121. [ 0.004804] CPU0: Thermal monitoring enabled (TM1)
  122. [ 0.004812] process: using mwait in idle threads
  123. [ 0.004814] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
  124. [ 0.004814] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
  125. [ 0.004814] tlb_flushall_shift: 6
  126. [ 0.004888] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
  127. [ 0.005559] ACPI: Core revision 20131115
  128. [ 0.013392] ACPI: All ACPI Tables successfully acquired
  129. [ 0.038553] ftrace: allocating 28592 entries in 112 pages
  130. [ 0.046774] dmar: Host address width 39
  131. [ 0.046776] dmar: DRHD base: 0x000000fed90000 flags: 0x0
  132. [ 0.046780] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
  133. [ 0.046781] dmar: DRHD base: 0x000000fed91000 flags: 0x1
  134. [ 0.046784] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
  135. [ 0.046785] dmar: RMRR base: 0x000000d9ea4000 end: 0x000000d9eb3fff
  136. [ 0.046785] dmar: RMRR base: 0x000000db000000 end: 0x000000df1fffff
  137. [ 0.046849] IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
  138. [ 0.046850] HPET id 0 under DRHD base 0xfed91000
  139. [ 0.046851] Your BIOS is broken and requested that x2apic be disabled.
  140. [ 0.046851] This will slightly decrease performance.
  141. [ 0.046851] Use 'intremap=no_x2apic_optout' to override BIOS request.
  142. [ 0.046954] Enabled IRQ remapping in xapic mode
  143. [ 0.046955] x2apic not enabled, IRQ remapping is in xapic mode
  144. [ 0.047355] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  145. [ 0.087098] smpboot: CPU0: Intel(R) Core(TM) i5-4690K CPU @ 3.50GHz (fam: 06, model: 3c, stepping: 03)
  146. [ 0.087103] TSC deadline timer enabled
  147. [ 0.087109] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
  148. [ 0.087114] ... version: 3
  149. [ 0.087114] ... bit width: 48
  150. [ 0.087115] ... generic registers: 8
  151. [ 0.087115] ... value mask: 0000ffffffffffff
  152. [ 0.087116] ... max period: 0000ffffffffffff
  153. [ 0.087116] ... fixed-purpose events: 3
  154. [ 0.087117] ... event mask: 00000007000000ff
  155. [ 0.088132] x86: Booting SMP configuration:
  156. [ 0.102014] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  157. [ 0.088134] .... node #0, CPUs: #1 #2 #3
  158. [ 0.129813] x86: Booted up 1 node, 4 CPUs
  159. [ 0.129815] smpboot: Total of 4 processors activated (28001.24 BogoMIPS)
  160. [ 0.132464] devtmpfs: initialized
  161. [ 0.134017] EVM: security.selinux
  162. [ 0.134018] EVM: security.SMACK64
  163. [ 0.134018] EVM: security.ima
  164. [ 0.134019] EVM: security.capability
  165. [ 0.134042] PM: Registering ACPI NVS region [mem 0xd379f000-0xd37a5fff] (28672 bytes)
  166. [ 0.134044] PM: Registering ACPI NVS region [mem 0xd9115000-0xd954ffff] (4435968 bytes)
  167. [ 0.134512] pinctrl core: initialized pinctrl subsystem
  168. [ 0.134545] regulator-dummy: no parameters
  169. [ 0.134570] RTC time: 16:30:20, date: 10/31/15
  170. [ 0.134589] NET: Registered protocol family 16
  171. [ 0.134648] cpuidle: using governor ladder
  172. [ 0.134649] cpuidle: using governor menu
  173. [ 0.134671] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
  174. [ 0.134672] ACPI: bus type PCI registered
  175. [ 0.134673] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  176. [ 0.134704] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
  177. [ 0.134706] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
  178. [ 0.138784] PCI: Using configuration type 1 for base access
  179. [ 0.139319] bio: create slab <bio-0> at 0
  180. [ 0.139400] ACPI: Added _OSI(Module Device)
  181. [ 0.139401] ACPI: Added _OSI(Processor Device)
  182. [ 0.139402] ACPI: Added _OSI(3.0 _SCP Extensions)
  183. [ 0.139403] ACPI: Added _OSI(Processor Aggregator Device)
  184. [ 0.145885] ACPI: Executed 6 blocks of module-level executable AML code
  185. [ 0.153856] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
  186. [ 0.161923] ACPI: SSDT 00000000d8fd6c18 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
  187. [ 0.162270] ACPI: Dynamic OEM Table Load:
  188. [ 0.162271] ACPI: SSDT (null) 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
  189. [ 0.166005] ACPI: SSDT 00000000d8fd6618 0005AA (v02 PmRef ApIst 00003000 INTL 20051117)
  190. [ 0.166391] ACPI: Dynamic OEM Table Load:
  191. [ 0.166392] ACPI: SSDT (null) 0005AA (v02 PmRef ApIst 00003000 INTL 20051117)
  192. [ 0.169925] ACPI: SSDT 00000000d8fd5d98 000119 (v02 PmRef ApCst 00003000 INTL 20051117)
  193. [ 0.170269] ACPI: Dynamic OEM Table Load:
  194. [ 0.170270] ACPI: SSDT (null) 000119 (v02 PmRef ApCst 00003000 INTL 20051117)
  195. [ 0.174267] ACPI: Interpreter enabled
  196. [ 0.174272] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
  197. [ 0.174276] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
  198. [ 0.174288] ACPI: (supports S0 S3 S4 S5)
  199. [ 0.174288] ACPI: Using IOAPIC for interrupt routing
  200. [ 0.174307] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  201. [ 0.174430] ACPI: No dock devices found.
  202. [ 0.174668] ACPI: Power Resource [PG00] (on)
  203. [ 0.174837] ACPI: Power Resource [PG01] (on)
  204. [ 0.174995] ACPI: Power Resource [PG02] (on)
  205. [ 0.177021] ACPI: Power Resource [WRST] (off)
  206. [ 0.177164] ACPI: Power Resource [WRST] (off)
  207. [ 0.177305] ACPI: Power Resource [WRST] (off)
  208. [ 0.177444] ACPI: Power Resource [WRST] (off)
  209. [ 0.177583] ACPI: Power Resource [WRST] (off)
  210. [ 0.177723] ACPI: Power Resource [WRST] (off)
  211. [ 0.177863] ACPI: Power Resource [WRST] (off)
  212. [ 0.178002] ACPI: Power Resource [WRST] (off)
  213. [ 0.180130] ACPI: Power Resource [FN00] (off)
  214. [ 0.180170] ACPI: Power Resource [FN01] (off)
  215. [ 0.180212] ACPI: Power Resource [FN02] (off)
  216. [ 0.180250] ACPI: Power Resource [FN03] (off)
  217. [ 0.180287] ACPI: Power Resource [FN04] (off)
  218. [ 0.180818] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
  219. [ 0.180822] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
  220. [ 0.180955] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
  221. [ 0.181033] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
  222. [ 0.181034] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
  223. [ 0.181304] acpi PNP0A08:00: host bridge window expanded to [mem 0xdf200000-0xfeafffff]; [mem 0xdf200000-0xfeafffff] ignored
  224. [ 0.181420] PCI host bridge to bus 0000:00
  225. [ 0.181422] pci_bus 0000:00: root bus resource [bus 00-3e]
  226. [ 0.181423] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
  227. [ 0.181424] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
  228. [ 0.181425] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
  229. [ 0.181425] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
  230. [ 0.181426] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
  231. [ 0.181427] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
  232. [ 0.181428] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
  233. [ 0.181429] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
  234. [ 0.181430] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
  235. [ 0.181430] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
  236. [ 0.181435] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
  237. [ 0.181487] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
  238. [ 0.181495] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
  239. [ 0.181499] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
  240. [ 0.181502] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
  241. [ 0.181551] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
  242. [ 0.181556] pci 0000:00:03.0: reg 0x10: [mem 0xf7e34000-0xf7e37fff 64bit]
  243. [ 0.181624] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
  244. [ 0.181639] pci 0000:00:14.0: reg 0x10: [mem 0xf7e20000-0xf7e2ffff 64bit]
  245. [ 0.181689] pci 0000:00:14.0: PME# supported from D3hot D3cold
  246. [ 0.181723] pci 0000:00:14.0: System wakeup disabled by ACPI
  247. [ 0.181744] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
  248. [ 0.181760] pci 0000:00:16.0: reg 0x10: [mem 0xf7e3e000-0xf7e3e00f 64bit]
  249. [ 0.181814] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
  250. [ 0.181864] pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
  251. [ 0.181878] pci 0000:00:19.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff]
  252. [ 0.181885] pci 0000:00:19.0: reg 0x14: [mem 0xf7e3c000-0xf7e3cfff]
  253. [ 0.181892] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
  254. [ 0.181942] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
  255. [ 0.181974] pci 0000:00:19.0: System wakeup disabled by ACPI
  256. [ 0.181996] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
  257. [ 0.182013] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e3b000-0xf7e3b3ff]
  258. [ 0.182089] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
  259. [ 0.182124] pci 0000:00:1a.0: System wakeup disabled by ACPI
  260. [ 0.182144] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
  261. [ 0.182155] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e30000-0xf7e33fff 64bit]
  262. [ 0.182210] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  263. [ 0.182242] pci 0000:00:1b.0: System wakeup disabled by ACPI
  264. [ 0.182260] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
  265. [ 0.182315] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  266. [ 0.182345] pci 0000:00:1c.0: System wakeup disabled by ACPI
  267. [ 0.182363] pci 0000:00:1c.2: [8086:244e] type 01 class 0x060401
  268. [ 0.182417] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
  269. [ 0.182446] pci 0000:00:1c.2: System wakeup disabled by ACPI
  270. [ 0.182463] pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400
  271. [ 0.182516] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
  272. [ 0.182545] pci 0000:00:1c.3: System wakeup disabled by ACPI
  273. [ 0.182562] pci 0000:00:1c.4: [8086:8c98] type 01 class 0x060400
  274. [ 0.182616] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
  275. [ 0.182645] pci 0000:00:1c.4: System wakeup disabled by ACPI
  276. [ 0.182662] pci 0000:00:1c.5: [8086:8c9a] type 01 class 0x060400
  277. [ 0.182716] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
  278. [ 0.182745] pci 0000:00:1c.5: System wakeup disabled by ACPI
  279. [ 0.182763] pci 0000:00:1c.7: [8086:8c9e] type 01 class 0x060400
  280. [ 0.182817] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
  281. [ 0.182846] pci 0000:00:1c.7: System wakeup disabled by ACPI
  282. [ 0.182867] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
  283. [ 0.182884] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e3a000-0xf7e3a3ff]
  284. [ 0.182960] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
  285. [ 0.182995] pci 0000:00:1d.0: System wakeup disabled by ACPI
  286. [ 0.183015] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
  287. [ 0.183146] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
  288. [ 0.183158] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
  289. [ 0.183164] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
  290. [ 0.183170] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
  291. [ 0.183176] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
  292. [ 0.183182] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
  293. [ 0.183188] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e39000-0xf7e397ff]
  294. [ 0.183219] pci 0000:00:1f.2: PME# supported from D3hot
  295. [ 0.183259] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
  296. [ 0.183271] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e38000-0xf7e380ff 64bit]
  297. [ 0.183287] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
  298. [ 0.183389] acpiphp: Slot [1] registered
  299. [ 0.183393] pci 0000:00:1c.0: PCI bridge to [bus 01]
  300. [ 0.183470] pci 0000:02:00.0: [1b21:1080] type 01 class 0x060400
  301. [ 0.183586] pci 0000:02:00.0: supports D1 D2
  302. [ 0.183587] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  303. [ 0.183612] pci 0000:02:00.0: System wakeup disabled by ACPI
  304. [ 0.192050] pci 0000:00:1c.2: PCI bridge to [bus 02-03] (subtractive decode)
  305. [ 0.192058] pci 0000:00:1c.2: bridge window [io 0x0000-0x0cf7] (subtractive decode)
  306. [ 0.192059] pci 0000:00:1c.2: bridge window [io 0x0d00-0xffff] (subtractive decode)
  307. [ 0.192060] pci 0000:00:1c.2: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
  308. [ 0.192061] pci 0000:00:1c.2: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
  309. [ 0.192061] pci 0000:00:1c.2: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
  310. [ 0.192062] pci 0000:00:1c.2: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
  311. [ 0.192063] pci 0000:00:1c.2: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
  312. [ 0.192064] pci 0000:00:1c.2: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
  313. [ 0.192065] pci 0000:00:1c.2: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
  314. [ 0.192066] pci 0000:00:1c.2: bridge window [mem 0xdf200000-0xfeafffff] (subtractive decode)
  315. [ 0.192187] pci 0000:02:00.0: PCI bridge to [bus 03]
  316. [ 0.192263] acpiphp: Slot [1-1] registered
  317. [ 0.192267] pci 0000:00:1c.3: PCI bridge to [bus 04]
  318. [ 0.192345] pci 0000:05:00.0: [1b21:1142] type 00 class 0x0c0330
  319. [ 0.192368] pci 0000:05:00.0: reg 0x10: [mem 0xf7d00000-0xf7d07fff 64bit]
  320. [ 0.192482] pci 0000:05:00.0: PME# supported from D3cold
  321. [ 0.192506] pci 0000:05:00.0: System wakeup disabled by ACPI
  322. [ 0.200065] pci 0000:00:1c.4: PCI bridge to [bus 05]
  323. [ 0.200069] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
  324. [ 0.200125] acpiphp: Slot [1-2] registered
  325. [ 0.200130] pci 0000:00:1c.5: PCI bridge to [bus 06]
  326. [ 0.200201] pci 0000:07:00.0: [1b21:0612] type 00 class 0x010601
  327. [ 0.200215] pci 0000:07:00.0: reg 0x10: [io 0xe050-0xe057]
  328. [ 0.200225] pci 0000:07:00.0: reg 0x14: [io 0xe040-0xe043]
  329. [ 0.200236] pci 0000:07:00.0: reg 0x18: [io 0xe030-0xe037]
  330. [ 0.200246] pci 0000:07:00.0: reg 0x1c: [io 0xe020-0xe023]
  331. [ 0.200256] pci 0000:07:00.0: reg 0x20: [io 0xe000-0xe01f]
  332. [ 0.200266] pci 0000:07:00.0: reg 0x24: [mem 0xf7c00000-0xf7c001ff]
  333. [ 0.200338] pci 0000:07:00.0: System wakeup disabled by ACPI
  334. [ 0.208077] pci 0000:00:1c.7: PCI bridge to [bus 07]
  335. [ 0.208080] pci 0000:00:1c.7: bridge window [io 0xe000-0xefff]
  336. [ 0.208082] pci 0000:00:1c.7: bridge window [mem 0xf7c00000-0xf7cfffff]
  337. [ 0.208607] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
  338. [ 0.208639] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
  339. [ 0.208669] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
  340. [ 0.208699] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
  341. [ 0.208729] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
  342. [ 0.208761] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
  343. [ 0.208791] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
  344. [ 0.208821] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
  345. [ 0.209087] ACPI: Enabled 6 GPEs in block 00 to 3F
  346. [ 0.209091] ACPI: \_SB_.PCI0: notify handler is installed
  347. [ 0.209136] Found 1 acpi root devices
  348. [ 0.209187] vgaarb: setting as boot device: PCI:0000:00:02.0
  349. [ 0.209189] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
  350. [ 0.209191] vgaarb: loaded
  351. [ 0.209191] vgaarb: bridge control possible 0000:00:02.0
  352. [ 0.209274] SCSI subsystem initialized
  353. [ 0.209297] libata version 3.00 loaded.
  354. [ 0.209311] ACPI: bus type USB registered
  355. [ 0.209320] usbcore: registered new interface driver usbfs
  356. [ 0.209324] usbcore: registered new interface driver hub
  357. [ 0.209333] usbcore: registered new device driver usb
  358. [ 0.209387] PCI: Using ACPI for IRQ routing
  359. [ 0.210502] PCI: pci_cache_line_size set to 64 bytes
  360. [ 0.210545] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
  361. [ 0.210546] e820: reserve RAM buffer [mem 0xd379f000-0xd3ffffff]
  362. [ 0.210547] e820: reserve RAM buffer [mem 0xd3bf4000-0xd3ffffff]
  363. [ 0.210547] e820: reserve RAM buffer [mem 0xd8f9d000-0xdbffffff]
  364. [ 0.210548] e820: reserve RAM buffer [mem 0xd9115000-0xdbffffff]
  365. [ 0.210549] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
  366. [ 0.210550] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
  367. [ 0.210594] NetLabel: Initializing
  368. [ 0.210595] NetLabel: domain hash size = 128
  369. [ 0.210596] NetLabel: protocols = UNLABELED CIPSOv4
  370. [ 0.210604] NetLabel: unlabeled traffic allowed by default
  371. [ 0.210634] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  372. [ 0.210637] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
  373. [ 0.212662] Switched to clocksource hpet
  374. [ 0.215242] AppArmor: AppArmor Filesystem Enabled
  375. [ 0.215253] pnp: PnP ACPI init
  376. [ 0.215259] ACPI: bus type PNP registered
  377. [ 0.215332] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
  378. [ 0.215334] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
  379. [ 0.215341] pnp 00:01: [dma 4]
  380. [ 0.215348] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
  381. [ 0.215358] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
  382. [ 0.215428] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
  383. [ 0.215456] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
  384. [ 0.215481] system 00:05: [io 0x0800-0x087f] has been reserved
  385. [ 0.215482] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
  386. [ 0.215497] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
  387. [ 0.215517] system 00:07: [io 0x1854-0x1857] has been reserved
  388. [ 0.215518] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
  389. [ 0.215585] system 00:08: [io 0x0a00-0x0a0f] has been reserved
  390. [ 0.215586] system 00:08: [io 0x0a10-0x0a1f] has been reserved
  391. [ 0.215587] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
  392. [ 0.215682] pnp 00:09: [dma 0 disabled]
  393. [ 0.215708] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
  394. [ 0.215734] system 00:0a: [io 0x04d0-0x04d1] has been reserved
  395. [ 0.215735] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
  396. [ 0.215952] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
  397. [ 0.215953] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
  398. [ 0.215954] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
  399. [ 0.215955] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
  400. [ 0.215956] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
  401. [ 0.215957] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
  402. [ 0.215958] system 00:0b: [mem 0xfed90000-0xfed93fff] could not be reserved
  403. [ 0.215959] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
  404. [ 0.215960] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
  405. [ 0.215962] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
  406. [ 0.215963] system 00:0b: [mem 0xf7fe0000-0xf7feffff] has been reserved
  407. [ 0.215964] system 00:0b: [mem 0xf7ff0000-0xf7ffffff] has been reserved
  408. [ 0.215965] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
  409. [ 0.216078] pnp: PnP ACPI: found 12 devices
  410. [ 0.216079] ACPI: bus type PNP unregistered
  411. [ 0.221612] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
  412. [ 0.221614] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
  413. [ 0.221615] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000
  414. [ 0.221623] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
  415. [ 0.221624] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
  416. [ 0.221625] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
  417. [ 0.221627] pci 0000:00:1c.5: BAR 14: assigned [mem 0xdf200000-0xdf3fffff]
  418. [ 0.221629] pci 0000:00:1c.5: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref]
  419. [ 0.221630] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
  420. [ 0.221632] pci 0000:00:1c.0: PCI bridge to [bus 01]
  421. [ 0.221640] pci 0000:02:00.0: PCI bridge to [bus 03]
  422. [ 0.221656] pci 0000:00:1c.2: PCI bridge to [bus 02-03]
  423. [ 0.221664] pci 0000:00:1c.3: PCI bridge to [bus 04]
  424. [ 0.221672] pci 0000:00:1c.4: PCI bridge to [bus 05]
  425. [ 0.221676] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
  426. [ 0.221681] pci 0000:00:1c.5: PCI bridge to [bus 06]
  427. [ 0.221683] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
  428. [ 0.221687] pci 0000:00:1c.5: bridge window [mem 0xdf200000-0xdf3fffff]
  429. [ 0.221690] pci 0000:00:1c.5: bridge window [mem 0xdf400000-0xdf5fffff 64bit pref]
  430. [ 0.221694] pci 0000:00:1c.7: PCI bridge to [bus 07]
  431. [ 0.221696] pci 0000:00:1c.7: bridge window [io 0xe000-0xefff]
  432. [ 0.221700] pci 0000:00:1c.7: bridge window [mem 0xf7c00000-0xf7cfffff]
  433. [ 0.221706] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
  434. [ 0.221707] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
  435. [ 0.221708] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  436. [ 0.221709] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
  437. [ 0.221710] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
  438. [ 0.221711] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
  439. [ 0.221712] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
  440. [ 0.221712] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
  441. [ 0.221713] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
  442. [ 0.221714] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff]
  443. [ 0.221715] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
  444. [ 0.221716] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
  445. [ 0.221717] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
  446. [ 0.221718] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000d3fff]
  447. [ 0.221719] pci_bus 0000:02: resource 8 [mem 0x000d4000-0x000d7fff]
  448. [ 0.221719] pci_bus 0000:02: resource 9 [mem 0x000d8000-0x000dbfff]
  449. [ 0.221720] pci_bus 0000:02: resource 10 [mem 0x000dc000-0x000dffff]
  450. [ 0.221721] pci_bus 0000:02: resource 11 [mem 0x000e0000-0x000e3fff]
  451. [ 0.221722] pci_bus 0000:02: resource 12 [mem 0x000e4000-0x000e7fff]
  452. [ 0.221723] pci_bus 0000:02: resource 13 [mem 0xdf200000-0xfeafffff]
  453. [ 0.221724] pci_bus 0000:05: resource 1 [mem 0xf7d00000-0xf7dfffff]
  454. [ 0.221725] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
  455. [ 0.221726] pci_bus 0000:06: resource 1 [mem 0xdf200000-0xdf3fffff]
  456. [ 0.221727] pci_bus 0000:06: resource 2 [mem 0xdf400000-0xdf5fffff 64bit pref]
  457. [ 0.221728] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
  458. [ 0.221728] pci_bus 0000:07: resource 1 [mem 0xf7c00000-0xf7cfffff]
  459. [ 0.221745] NET: Registered protocol family 2
  460. [ 0.221885] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  461. [ 0.222023] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  462. [ 0.222121] TCP: Hash tables configured (established 131072 bind 65536)
  463. [ 0.222131] TCP: reno registered
  464. [ 0.222142] UDP hash table entries: 8192 (order: 6, 262144 bytes)
  465. [ 0.222178] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
  466. [ 0.222227] NET: Registered protocol family 1
  467. [ 0.222234] pci 0000:00:02.0: Video device with shadowed ROM
  468. [ 0.222615] PCI: CLS 64 bytes, default 64
  469. [ 0.222649] Trying to unpack rootfs image as initramfs...
  470. [ 0.494003] Freeing initrd memory: 27184K (ffff880034ad8000 - ffff880036564000)
  471. [ 0.494029] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  472. [ 0.494030] software IO TLB [mem 0xd4f9d000-0xd8f9d000] (64MB) mapped at [ffff8800d4f9d000-ffff8800d8f9cfff]
  473. [ 0.494140] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1d
  474. [ 0.494144] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1d
  475. [ 0.494148] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x1d
  476. [ 0.494152] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x1d
  477. [ 0.494180] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  478. [ 0.494181] Scanning for low memory corruption every 60 seconds
  479. [ 0.494318] Initialise system trusted keyring
  480. [ 0.494343] audit: initializing netlink socket (disabled)
  481. [ 0.494349] type=2000 audit(1446309020.472:1): initialized
  482. [ 0.511112] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  483. [ 0.511815] zbud: loaded
  484. [ 0.511900] VFS: Disk quotas dquot_6.5.2
  485. [ 0.511919] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  486. [ 0.512125] fuse init (API version 7.22)
  487. [ 0.512159] msgmni has been set to 31854
  488. [ 0.512185] Key type big_key registered
  489. [ 0.512435] Key type asymmetric registered
  490. [ 0.512436] Asymmetric key parser 'x509' registered
  491. [ 0.512452] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  492. [ 0.512474] io scheduler noop registered
  493. [ 0.512475] io scheduler deadline registered (default)
  494. [ 0.512486] io scheduler cfq registered
  495. [ 0.512852] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  496. [ 0.512858] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  497. [ 0.512879] vesafb: mode is 1600x900x32, linelength=6400, pages=0
  498. [ 0.512879] vesafb: scrolling: redraw
  499. [ 0.512880] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  500. [ 0.515035] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005c00000, using 5632k, total 5632k
  501. [ 0.517120] Console: switching to colour frame buffer device 200x56
  502. [ 0.519134] fb0: VESA VGA frame buffer device
  503. [ 0.519147] intel_idle: MWAIT substates: 0x42120
  504. [ 0.519148] intel_idle: v0.4 model 0x3C
  505. [ 0.519149] intel_idle: lapic_timer_reliable_states 0xffffffff
  506. [ 0.519211] ipmi message handler version 39.2
  507. [ 0.519260] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
  508. [ 0.519264] ACPI: Power Button [PWRB]
  509. [ 0.519281] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
  510. [ 0.519282] ACPI: Sleep Button [SLPB]
  511. [ 0.519297] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
  512. [ 0.519298] ACPI: Power Button [PWRF]
  513. [ 0.519338] ACPI: Fan [FAN0] (off)
  514. [ 0.519350] ACPI: Fan [FAN1] (off)
  515. [ 0.519362] ACPI: Fan [FAN2] (off)
  516. [ 0.519373] ACPI: Fan [FAN3] (off)
  517. [ 0.519384] ACPI: Fan [FAN4] (off)
  518. [ 0.519614] thermal LNXTHERM:00: registered as thermal_zone0
  519. [ 0.519615] ACPI: Thermal Zone [TZ00] (28 C)
  520. [ 0.519717] thermal LNXTHERM:01: registered as thermal_zone1
  521. [ 0.519718] ACPI: Thermal Zone [TZ01] (30 C)
  522. [ 0.519732] GHES: HEST is not enabled!
  523. [ 0.519779] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  524. [ 0.540170] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
  525. [ 0.541008] Linux agpgart interface v0.103
  526. [ 0.541673] brd: module loaded
  527. [ 0.541997] loop: module loaded
  528. [ 0.542173] libphy: Fixed MDIO Bus: probed
  529. [ 0.542212] tun: Universal TUN/TAP device driver, 1.6
  530. [ 0.542212] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  531. [ 0.542234] PPP generic driver version 2.4.2
  532. [ 0.542255] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  533. [ 0.542257] ehci-pci: EHCI PCI platform driver
  534. [ 0.542329] ehci-pci 0000:00:1a.0: EHCI Host Controller
  535. [ 0.542332] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
  536. [ 0.542342] ehci-pci 0000:00:1a.0: debug port 2
  537. [ 0.546239] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
  538. [ 0.546252] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e3b000
  539. [ 0.557172] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
  540. [ 0.557201] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  541. [ 0.557202] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  542. [ 0.557203] usb usb1: Product: EHCI Host Controller
  543. [ 0.557203] usb usb1: Manufacturer: Linux 3.13.0-66-generic ehci_hcd
  544. [ 0.557204] usb usb1: SerialNumber: 0000:00:1a.0
  545. [ 0.557296] hub 1-0:1.0: USB hub found
  546. [ 0.557300] hub 1-0:1.0: 2 ports detected
  547. [ 0.557412] ehci-pci 0000:00:1d.0: EHCI Host Controller
  548. [ 0.557415] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
  549. [ 0.557424] ehci-pci 0000:00:1d.0: debug port 2
  550. [ 0.561336] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
  551. [ 0.561347] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e3a000
  552. [ 0.573214] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
  553. [ 0.573238] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  554. [ 0.573240] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  555. [ 0.573241] usb usb2: Product: EHCI Host Controller
  556. [ 0.573241] usb usb2: Manufacturer: Linux 3.13.0-66-generic ehci_hcd
  557. [ 0.573242] usb usb2: SerialNumber: 0000:00:1d.0
  558. [ 0.573330] hub 2-0:1.0: USB hub found
  559. [ 0.573333] hub 2-0:1.0: 2 ports detected
  560. [ 0.573391] ehci-platform: EHCI generic platform driver
  561. [ 0.573396] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  562. [ 0.573397] ohci-pci: OHCI PCI platform driver
  563. [ 0.573401] ohci-platform: OHCI generic platform driver
  564. [ 0.573404] uhci_hcd: USB Universal Host Controller Interface driver
  565. [ 0.573467] xhci_hcd 0000:00:14.0: xHCI Host Controller
  566. [ 0.573471] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
  567. [ 0.573547] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
  568. [ 0.573562] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
  569. [ 0.573597] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  570. [ 0.573598] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  571. [ 0.573599] usb usb3: Product: xHCI Host Controller
  572. [ 0.573600] usb usb3: Manufacturer: Linux 3.13.0-66-generic xhci_hcd
  573. [ 0.573601] usb usb3: SerialNumber: 0000:00:14.0
  574. [ 0.573684] hub 3-0:1.0: USB hub found
  575. [ 0.573699] hub 3-0:1.0: 14 ports detected
  576. [ 0.576419] xhci_hcd 0000:00:14.0: xHCI Host Controller
  577. [ 0.576421] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
  578. [ 0.576449] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  579. [ 0.576450] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  580. [ 0.576450] usb usb4: Product: xHCI Host Controller
  581. [ 0.576451] usb usb4: Manufacturer: Linux 3.13.0-66-generic xhci_hcd
  582. [ 0.576452] usb usb4: SerialNumber: 0000:00:14.0
  583. [ 0.576531] hub 4-0:1.0: USB hub found
  584. [ 0.576542] hub 4-0:1.0: 6 ports detected
  585. [ 0.585284] xhci_hcd 0000:05:00.0: xHCI Host Controller
  586. [ 0.585288] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
  587. [ 0.645937] xhci_hcd 0000:05:00.0: irq 43 for MSI/MSI-X
  588. [ 0.645941] xhci_hcd 0000:05:00.0: irq 44 for MSI/MSI-X
  589. [ 0.645944] xhci_hcd 0000:05:00.0: irq 45 for MSI/MSI-X
  590. [ 0.645948] xhci_hcd 0000:05:00.0: irq 46 for MSI/MSI-X
  591. [ 0.645952] xhci_hcd 0000:05:00.0: irq 47 for MSI/MSI-X
  592. [ 0.646028] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
  593. [ 0.646029] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  594. [ 0.646030] usb usb5: Product: xHCI Host Controller
  595. [ 0.646031] usb usb5: Manufacturer: Linux 3.13.0-66-generic xhci_hcd
  596. [ 0.646032] usb usb5: SerialNumber: 0000:05:00.0
  597. [ 0.646142] hub 5-0:1.0: USB hub found
  598. [ 0.646149] hub 5-0:1.0: 2 ports detected
  599. [ 0.646186] xhci_hcd 0000:05:00.0: xHCI Host Controller
  600. [ 0.646188] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
  601. [ 0.646244] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
  602. [ 0.646245] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  603. [ 0.646246] usb usb6: Product: xHCI Host Controller
  604. [ 0.646247] usb usb6: Manufacturer: Linux 3.13.0-66-generic xhci_hcd
  605. [ 0.646247] usb usb6: SerialNumber: 0000:05:00.0
  606. [ 0.646366] hub 6-0:1.0: USB hub found
  607. [ 0.646372] hub 6-0:1.0: 2 ports detected
  608. [ 0.653446] i8042: PNP: No PS/2 controller found. Probing ports directly.
  609. [ 0.656066] serio: i8042 KBD port at 0x60,0x64 irq 1
  610. [ 0.656070] serio: i8042 AUX port at 0x60,0x64 irq 12
  611. [ 0.656250] mousedev: PS/2 mouse device common for all mice
  612. [ 0.656521] rtc_cmos 00:06: RTC can wake from S4
  613. [ 0.656626] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
  614. [ 0.656649] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
  615. [ 0.656685] device-mapper: uevent: version 1.0.3
  616. [ 0.656731] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
  617. [ 0.656734] ledtrig-cpu: registered to indicate activity on CPUs
  618. [ 0.656785] TCP: cubic registered
  619. [ 0.656826] NET: Registered protocol family 10
  620. [ 0.656907] NET: Registered protocol family 17
  621. [ 0.656911] Key type dns_resolver registered
  622. [ 0.657064] Loading compiled-in X.509 certificates
  623. [ 0.657603] Loaded X.509 cert 'Magrathea: Glacier signing key: d957c2fbed0d9fb461efad39c9ccafb5b5e06790'
  624. [ 0.657610] registered taskstats version 1
  625. [ 0.659239] Key type trusted registered
  626. [ 0.661221] Key type encrypted registered
  627. [ 0.661223] AppArmor: AppArmor sha1 policy hashing enabled
  628. [ 0.661225] IMA: No TPM chip found, activating TPM-bypass!
  629. [ 0.661637] regulator-dummy: disabling
  630. [ 0.661696] Magic number: 3:530:541
  631. [ 0.661778] rtc_cmos 00:06: setting system clock to 2015-10-31 16:30:21 UTC (1446309021)
  632. [ 0.662226] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  633. [ 0.662227] EDD information not available.
  634. [ 0.662248] PM: Hibernation image not present or could not be loaded.
  635. [ 0.662739] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
  636. [ 0.662740] Write protecting the kernel read-only data: 12288k
  637. [ 0.664078] Freeing unused kernel memory: 784K (ffff88000173c000 - ffff880001800000)
  638. [ 0.665080] Freeing unused kernel memory: 680K (ffff880001b56000 - ffff880001c00000)
  639. [ 0.672171] systemd-udevd[116]: starting version 204
  640. [ 0.681488] wmi: Mapper loaded
  641. [ 0.683551] pps_core: LinuxPPS API ver. 1 registered
  642. [ 0.683553] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  643. [ 0.684239] PTP clock support registered
  644. [ 0.685434] [drm] Initialized drm 1.1.0 20060810
  645. [ 0.686455] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
  646. [ 0.686456] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
  647. [ 0.686581] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
  648. [ 0.686595] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
  649. [ 0.858629] e1000e 0000:00:19.0 eth0: registered PHC clock
  650. [ 0.858631] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 44:8a:5b:9d:f1:33
  651. [ 0.858632] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
  652. [ 0.858674] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
  653. [ 0.858702] ahci 0000:00:1f.2: version 3.0
  654. [ 0.858802] ahci 0000:00:1f.2: irq 49 for MSI/MSI-X
  655. [ 0.858843] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x27 impl SATA mode
  656. [ 0.858845] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
  657. [ 0.869675] usb 1-1: new high-speed USB device number 2 using ehci-pci
  658. [ 0.881991] scsi0 : ahci
  659. [ 0.882069] scsi1 : ahci
  660. [ 0.882139] scsi2 : ahci
  661. [ 0.882210] scsi3 : ahci
  662. [ 0.882282] scsi4 : ahci
  663. [ 0.882355] scsi5 : ahci
  664. [ 0.882382] ata1: SATA max UDMA/133 abar m2048@0xf7e39000 port 0xf7e39100 irq 49
  665. [ 0.882383] ata2: SATA max UDMA/133 abar m2048@0xf7e39000 port 0xf7e39180 irq 49
  666. [ 0.882385] ata3: SATA max UDMA/133 abar m2048@0xf7e39000 port 0xf7e39200 irq 49
  667. [ 0.882386] ata4: DUMMY
  668. [ 0.882387] ata5: DUMMY
  669. [ 0.882388] ata6: SATA max UDMA/133 abar m2048@0xf7e39000 port 0xf7e39380 irq 49
  670. [ 0.882476] ahci 0000:07:00.0: irq 50 for MSI/MSI-X
  671. [ 0.882502] ahci 0000:07:00.0: SSS flag set, parallel bus scan disabled
  672. [ 0.882540] ahci 0000:07:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
  673. [ 0.882542] ahci 0000:07:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
  674. [ 0.882687] scsi6 : ahci
  675. [ 0.882736] scsi7 : ahci
  676. [ 0.882767] ata7: SATA max UDMA/133 abar m512@0xf7c00000 port 0xf7c00100 irq 50
  677. [ 0.882770] ata8: SATA max UDMA/133 abar m512@0xf7c00000 port 0xf7c00180 irq 50
  678. [ 0.882990] [drm] Memory usable by graphics device = 2048M
  679. [ 0.882992] checking generic (e0000000 580000) vs hw (e0000000 10000000)
  680. [ 0.882993] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
  681. [ 0.883002] Console: switching to colour dummy device 80x25
  682. [ 0.925799] i915 0000:00:02.0: irq 51 for MSI/MSI-X
  683. [ 0.925804] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  684. [ 0.925805] [drm] Driver supports precise vblank timestamp query.
  685. [ 0.925889] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
  686. [ 0.964153] fbcon: inteldrmfb (fb0) is primary device
  687. [ 1.002256] usb 1-1: New USB device found, idVendor=8087, idProduct=8009
  688. [ 1.002257] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  689. [ 1.002493] hub 1-1:1.0: USB hub found
  690. [ 1.002606] hub 1-1:1.0: 6 ports detected
  691. [ 1.114024] usb 2-1: new high-speed USB device number 2 using ehci-pci
  692. [ 1.130074] Console: switching to colour frame buffer device 200x56
  693. [ 1.132231] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
  694. [ 1.132232] i915 0000:00:02.0: registered panic notifier
  695. [ 1.134922] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
  696. [ 1.135173] acpi device:17: registered as cooling_device9
  697. [ 1.135217] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
  698. [ 1.135254] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
  699. [ 1.202174] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  700. [ 1.202181] ata7: SATA link down (SStatus 0 SControl 300)
  701. [ 1.202194] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  702. [ 1.202210] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  703. [ 1.202223] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  704. [ 1.202831] ata2.00: ATA-9: WDC WD30EZRX-00SPEB0, 80.00A80, max UDMA/133
  705. [ 1.202833] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  706. [ 1.202908] ata3.00: ATA-9: WDC WD30EZRX-00DC0B0, 80.00A80, max UDMA/133
  707. [ 1.202910] ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  708. [ 1.203199] ata1.00: ATA-8: SanDisk SDSSDHP128G, X2316RL, max UDMA/133
  709. [ 1.203201] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
  710. [ 1.203518] ata2.00: configured for UDMA/133
  711. [ 1.203574] ata3.00: configured for UDMA/133
  712. [ 1.203790] ata6.00: ATAPI: Optiarc DVD RW AD-7280S, 1.01, max UDMA/100
  713. [ 1.204161] ata1.00: configured for UDMA/133
  714. [ 1.204316] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDHP1 X231 PQ: 0 ANSI: 5
  715. [ 1.204393] sd 0:0:0:0: Attached scsi generic sg0 type 0
  716. [ 1.204401] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
  717. [ 1.204424] sd 0:0:0:0: [sda] Write Protect is off
  718. [ 1.204425] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  719. [ 1.204432] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  720. [ 1.204501] scsi 1:0:0:0: Direct-Access ATA WDC WD30EZRX-00S 80.0 PQ: 0 ANSI: 5
  721. [ 1.204568] sd 1:0:0:0: Attached scsi generic sg1 type 0
  722. [ 1.204584] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
  723. [ 1.204586] sd 1:0:0:0: [sdb] 4096-byte physical blocks
  724. [ 1.204622] sd 1:0:0:0: [sdb] Write Protect is off
  725. [ 1.204624] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  726. [ 1.204629] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  727. [ 1.204660] scsi 2:0:0:0: Direct-Access ATA WDC WD30EZRX-00D 80.0 PQ: 0 ANSI: 5
  728. [ 1.204667] sda: sda1
  729. [ 1.204722] sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
  730. [ 1.204724] sd 2:0:0:0: [sdc] 4096-byte physical blocks
  731. [ 1.204740] sd 2:0:0:0: Attached scsi generic sg2 type 0
  732. [ 1.204741] sd 2:0:0:0: [sdc] Write Protect is off
  733. [ 1.204742] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
  734. [ 1.204748] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  735. [ 1.204762] sd 0:0:0:0: [sda] Attached SCSI disk
  736. [ 1.205635] ata6.00: configured for UDMA/100
  737. [ 1.206625] scsi 5:0:0:0: CD-ROM Optiarc DVD RW AD-7280S 1.01 PQ: 0 ANSI: 5
  738. [ 1.208353] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
  739. [ 1.208355] cdrom: Uniform CD-ROM driver Revision: 3.20
  740. [ 1.208442] sr 5:0:0:0: Attached scsi CD-ROM sr0
  741. [ 1.208475] sr 5:0:0:0: Attached scsi generic sg3 type 5
  742. [ 1.246612] usb 2-1: New USB device found, idVendor=8087, idProduct=8001
  743. [ 1.246614] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  744. [ 1.246861] hub 2-1:1.0: USB hub found
  745. [ 1.246936] hub 2-1:1.0: 8 ports detected
  746. [ 1.278479] sdb: sdb1
  747. [ 1.278618] sd 1:0:0:0: [sdb] Attached SCSI disk
  748. [ 1.288815] sdc: sdc1 sdc2
  749. [ 1.288936] sd 2:0:0:0: [sdc] Attached SCSI disk
  750. [ 1.414466] usb 3-3: new high-speed USB device number 2 using xhci_hcd
  751. [ 1.431916] usb 3-3: New USB device found, idVendor=05e3, idProduct=0608
  752. [ 1.431917] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  753. [ 1.431928] usb 3-3: Product: USB2.0 Hub
  754. [ 1.432465] hub 3-3:1.0: USB hub found
  755. [ 1.432733] hub 3-3:1.0: 3 ports detected
  756. [ 1.494581] tsc: Refined TSC clocksource calibration: 3499.996 MHz
  757. [ 1.526647] ata8: SATA link down (SStatus 0 SControl 300)
  758. [ 1.598725] usb 3-4: new full-speed USB device number 3 using xhci_hcd
  759. [ 1.616785] usb 3-4: New USB device found, idVendor=046d, idProduct=c246
  760. [ 1.616787] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  761. [ 1.616788] usb 3-4: Product: Gaming Mouse G300
  762. [ 1.616790] usb 3-4: Manufacturer: Logitech
  763. [ 1.619138] hidraw: raw HID events driver (C) Jiri Kosina
  764. [ 1.621931] usbcore: registered new interface driver usbhid
  765. [ 1.621933] usbhid: USB HID core driver
  766. [ 1.622754] input: Logitech Gaming Mouse G300 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input7
  767. [ 1.622816] hid-generic 0003:046D:C246.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Gaming Mouse G300] on usb-0000:00:14.0-4/input0
  768. [ 1.624621] input: Logitech Gaming Mouse G300 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/input/input8
  769. [ 1.624694] hid-generic 0003:046D:C246.0002: input,hiddev0,hidraw1: USB HID v1.10 Keyboard [Logitech Gaming Mouse G300] on usb-0000:00:14.0-4/input1
  770. [ 1.651872] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
  771. [ 1.651874] PM: Marking nosave pages: [mem 0xd379f000-0xd37a5fff]
  772. [ 1.651876] PM: Marking nosave pages: [mem 0xd3bf4000-0xd4204fff]
  773. [ 1.651890] PM: Marking nosave pages: [mem 0xd8f9d000-0xd9008fff]
  774. [ 1.651892] PM: Marking nosave pages: [mem 0xd9115000-0xd9ffefff]
  775. [ 1.651927] PM: Marking nosave pages: [mem 0xda000000-0xffffffff]
  776. [ 1.652299] PM: Basic memory bitmaps created
  777. [ 1.686330] PM: Basic memory bitmaps freed
  778. [ 1.686333] video LNXVIDEO:00: Restoring backlight state
  779. [ 1.695944] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  780. [ 1.782968] usb 3-9: new high-speed USB device number 4 using xhci_hcd
  781. [ 1.790027] random: init urandom read with 100 bits of entropy available
  782. [ 1.822204] usb 3-9: New USB device found, idVendor=0ac8, idProduct=3420
  783. [ 1.822206] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  784. [ 1.822207] usb 3-9: Product: A4TECH USB2.0 PC Camera
  785. [ 1.822208] usb 3-9: Manufacturer: A4TECH Corp.
  786. [ 1.894872] Adding 18923516k swap on /dev/sdc2. Priority:-1 extents:1 across:18923516k FS
  787. [ 1.901968] random: nonblocking pool is initialized
  788. [ 1.926428] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  789. [ 1.935198] usb 3-13: new high-speed USB device number 5 using xhci_hcd
  790. [ 1.950851] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
  791. [ 1.957159] systemd-udevd[368]: starting version 204
  792. [ 1.988357] lp: driver loaded but no devices found
  793. [ 1.994495] Linux video capture interface: v2.00
  794. [ 1.998116] ppdev: user-space parallel port driver
  795. [ 2.036611] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  796. [ 2.041337] mei_me 0000:00:16.0: irq 52 for MSI/MSI-X
  797. [ 2.051848] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
  798. [ 2.097959] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
  799. [ 2.109152] type=1400 audit(1446309022.940:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=481 comm="apparmor_parser"
  800. [ 2.109155] type=1400 audit(1446309022.940:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=481 comm="apparmor_parser"
  801. [ 2.109157] type=1400 audit(1446309022.940:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=481 comm="apparmor_parser"
  802. [ 2.109376] type=1400 audit(1446309022.940:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=481 comm="apparmor_parser"
  803. [ 2.109379] type=1400 audit(1446309022.940:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=481 comm="apparmor_parser"
  804. [ 2.109493] type=1400 audit(1446309022.940:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=481 comm="apparmor_parser"
  805. [ 2.112187] HDA driver get symbol successfully from i915 module
  806. [ 2.112211] snd_hda_intel 0000:00:03.0: irq 53 for MSI/MSI-X
  807. [ 2.112490] snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
  808. [ 2.141365] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
  809. [ 2.141607] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
  810. [ 2.142367] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
  811. [ 2.146376] SKU: Nid=0x1d sku_cfg=0x4029f62b
  812. [ 2.146378] SKU: port_connectivity=0x1
  813. [ 2.146378] SKU: enable_pcbeep=0x0
  814. [ 2.146379] SKU: check_sum=0x00000009
  815. [ 2.146380] SKU: customization=0x000000f6
  816. [ 2.146380] SKU: external_amp=0x5
  817. [ 2.146381] SKU: platform_type=0x0
  818. [ 2.146381] SKU: swap=0x1
  819. [ 2.146382] SKU: override=0x1
  820. [ 2.146766] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
  821. [ 2.146767] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  822. [ 2.146768] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
  823. [ 2.146768] mono: mono_out=0x0
  824. [ 2.146769] inputs:
  825. [ 2.146770] Front Mic=0x19
  826. [ 2.146770] Rear Mic=0x18
  827. [ 2.146771] Line=0x1a
  828. [ 2.146772] realtek: No valid SSID, checking pincfg 0x4029f62b for NID 0x1d
  829. [ 2.146773] realtek: Enabling init ASM_ID=0xf62b CODEC_ID=10ec0892
  830. [ 2.163269] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
  831. [ 2.163305] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
  832. [ 2.163328] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
  833. [ 2.163350] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
  834. [ 2.163371] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
  835. [ 2.163393] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
  836. [ 2.163414] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
  837. [ 2.163434] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
  838. [ 2.176712] usb 3-13: New USB device found, idVendor=0951, idProduct=1656
  839. [ 2.176714] usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  840. [ 2.176715] usb 3-13: Product: DT Ultimate G2
  841. [ 2.176716] usb 3-13: Manufacturer: Kingston
  842. [ 2.176717] usb 3-13: SerialNumber: 001A92053B6ABBA18134040D
  843. [ 2.263095] usb-storage 3-13:1.0: USB Mass Storage device detected
  844. [ 2.263307] scsi8 : usb-storage 3-13:1.0
  845. [ 2.263380] usbcore: registered new interface driver usb-storage
  846. [ 2.275299] init: failsafe main process (659) killed by TERM signal
  847. [ 2.304071] Bluetooth: Core ver 2.17
  848. [ 2.304083] NET: Registered protocol family 31
  849. [ 2.304083] Bluetooth: HCI device and connection manager initialized
  850. [ 2.304089] Bluetooth: HCI socket layer initialized
  851. [ 2.304090] Bluetooth: L2CAP socket layer initialized
  852. [ 2.304092] Bluetooth: SCO socket layer initialized
  853. [ 2.310213] Bluetooth: RFCOMM TTY layer initialized
  854. [ 2.310221] Bluetooth: RFCOMM socket layer initialized
  855. [ 2.310224] Bluetooth: RFCOMM ver 1.11
  856. [ 2.315416] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  857. [ 2.315417] Bluetooth: BNEP filters: protocol multicast
  858. [ 2.315424] Bluetooth: BNEP socket layer initialized
  859. [ 2.317794] init: avahi-cups-reload main process (832) terminated with status 1
  860. [ 2.325759] type=1400 audit(1446309023.156:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=841 comm="apparmor_parser"
  861. [ 2.325763] type=1400 audit(1446309023.156:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=841 comm="apparmor_parser"
  862. [ 2.325980] type=1400 audit(1446309023.156:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=841 comm="apparmor_parser"
  863. [ 2.347794] usb 5-1: new full-speed USB device number 2 using xhci_hcd
  864. [ 2.479589] usb 5-1: New USB device found, idVendor=1131, idProduct=1004
  865. [ 2.479591] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  866. [ 2.479592] usb 5-1: Product: ISSCBTA
  867. [ 2.479593] usb 5-1: Manufacturer: ISSC
  868. [ 2.480145] init: samba-ad-dc main process (912) terminated with status 1
  869. [ 2.498166] usbcore: registered new interface driver btusb
  870. [ 2.502817] Switched to clocksource tsc
  871. [ 2.536230] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
  872. [ 2.556096] usb 3-3.1: new full-speed USB device number 6 using xhci_hcd
  873. [ 2.573578] usb 3-3.1: New USB device found, idVendor=0458, idProduct=0153
  874. [ 2.573581] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  875. [ 2.573582] usb 3-3.1: Product: Manticore Gaming Keyboard
  876. [ 2.573583] usb 3-3.1: Manufacturer: Manticore
  877. [ 2.573644] usb 3-3.1: ep 0x83 - rounding interval to 16 microframes, ep desc says 24 microframes
  878. [ 2.578121] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
  879. [ 2.579976] vboxdrv: Found 4 processor cores
  880. [ 2.596275] vboxdrv: TSC mode is Invariant, tentative frequency 3499995981 Hz
  881. [ 2.596277] vboxdrv: Successfully loaded version 5.0.6 (interface 0x00240000)
  882. [ 2.640255] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
  883. [ 2.640348] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  884. [ 2.640527] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  885. [ 2.644281] usb 3-3.3: new low-speed USB device number 7 using xhci_hcd
  886. [ 2.668732] usb 3-3.3: New USB device found, idVendor=1345, idProduct=1000
  887. [ 2.668745] usb 3-3.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
  888. [ 2.668746] usb 3-3.3: Product: Generic USB Joystick
  889. [ 2.668888] usb 3-3.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  890. [ 2.673075] input: Generic USB Joystick as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.3/3-3.3:1.0/input/input20
  891. [ 2.673178] hid-generic 0003:1345:1000.0006: input,hidraw2: USB HID v1.10 Joystick [Generic USB Joystick ] on usb-0000:00:14.0-3.3/input0
  892. [ 2.681183] input: Manticore Manticore Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0/input/input21
  893. [ 2.682037] kye 0003:0458:0153.0003: input,hidraw3: USB HID v1.11 Keyboard [Manticore Manticore Gaming Keyboard] on usb-0000:00:14.0-3.1/input0
  894. [ 2.682045] kye 0003:0458:0153.0004: fixing up Genius Manticore Keyboard report descriptor
  895. [ 2.683338] input: Manticore Manticore Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.1/input/input22
  896. [ 2.683902] kye 0003:0458:0153.0004: input,hiddev0,hidraw4: USB HID v1.11 Mouse [Manticore Manticore Gaming Keyboard] on usb-0000:00:14.0-3.1/input1
  897. [ 2.798784] VBoxNetFlt: Successfully started.
  898. [ 2.800230] VBoxNetAdp: Successfully started.
  899. [ 2.801739] VBoxPciLinuxInit
  900. [ 2.803939] vboxpci: IOMMU not found (not registered)
  901. [ 2.844613] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
  902. [ 3.086695] init: plymouth-upstart-bridge main process ended, respawning
  903. [ 3.089846] init: plymouth-upstart-bridge main process ended, respawning
  904. [ 3.261393] scsi 8:0:0:0: Direct-Access Kingston DT Ultimate G2 PMAP PQ: 0 ANSI: 0 CCS
  905. [ 3.261890] sd 8:0:0:0: Attached scsi generic sg4 type 0
  906. [ 3.262113] sd 8:0:0:0: [sdd] 62586880 512-byte logical blocks: (32.0 GB/29.8 GiB)
  907. [ 3.262225] sd 8:0:0:0: [sdd] Write Protect is off
  908. [ 3.262227] sd 8:0:0:0: [sdd] Mode Sense: 23 00 00 00
  909. [ 3.263708] sd 8:0:0:0: [sdd] No Caching mode page found
  910. [ 3.263711] sd 8:0:0:0: [sdd] Assuming drive cache: write through
  911. [ 3.264517] sd 8:0:0:0: [sdd] No Caching mode page found
  912. [ 3.264519] sd 8:0:0:0: [sdd] Assuming drive cache: write through
  913. [ 3.389721] sdd: sdd1
  914. [ 3.390485] sd 8:0:0:0: [sdd] No Caching mode page found
  915. [ 3.390487] sd 8:0:0:0: [sdd] Assuming drive cache: write through
  916. [ 3.390489] sd 8:0:0:0: [sdd] Attached SCSI removable disk
  917. [ 6.074839] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
  918. [ 6.074868] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  919. [ 12.696919] kye 0003:0458:0153.0005: timeout initializing reports
  920. [ 12.697020] kye 0003:0458:0153.0005: hiddev0,hidraw5: USB HID v1.11 Device [Manticore Manticore Gaming Keyboard] on usb-0000:00:14.0-3.1/input2
  921. [ 52.338382] usbcore: registered new interface driver snd-usb-audio
  922. [ 52.338557] uvcvideo: Found UVC 1.00 device A4TECH USB2.0 PC Camera (0ac8:3420)
  923. [ 52.340123] input: A4TECH USB2.0 PC Camera as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/input/input23
  924. [ 52.340197] usbcore: registered new interface driver uvcvideo
  925. [ 52.340198] USB Video Class driver (1.1.1)
  926. [ 71.190976] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  927. [ 625.782208] sdd: detected capacity change from 32044482560 to 0
  928. [ 628.164325] usb 3-13: USB disconnect, device number 5
  929. [ 8607.108465] perf samples too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Advertisement
RAW Paste Data Copied
Advertisement