API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jun 2nd, 2018
464
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 39.17 KB | None | 0 0
raw download clone embed print report
  1. Found SD card, config.txt = 1, start.elf = 1, recovery.elf = 0, timeout = 0
  2. Read File: config.txt, 596 (bytes)
  3.  
  4.  
  5.  
  6.  
  7. Raspberry Pi Bootcode
  8. Read File: config.txt, 596
  9. Read File: start.elf, 3922500 (bytes)
  10. Read File: fixup.dat, 9797 (bytes)
  11. MESS:00:00:01.327140:0: brfs: File read: /mfs/sd/config.txt
  12. MESS:00:00:01.331664:0: brfs: File read: 596 bytes
  13. MESS:00:00:01.357303:0: HDMI:EDID version 1.3, 1 extensions, screen size 51x29 cm
  14. MESS:00:00:01.363136:0: HDMI:EDID features - videodef 0x80 standby suspend active off; colour encoding:RGB444|YCbCr422; sRGB is not default colourspace; preferred format is native; does not support GTF
  15. MESS:00:00:01.380751:0: HDMI:EDID found preferred CEA detail timing format: 1920x1080p @ 60 Hz (16)
  16. MESS:00:00:01.389502:0: HDMI:EDID found DMT format: code 4, 640x480p @ 60 Hz in established timing I/II
  17. MESS:00:00:01.398614:0: HDMI:EDID found DMT format: code 9, 800x600p @ 60 Hz in established timing I/II
  18. MESS:00:00:01.407729:0: HDMI:EDID found DMT format: code 16, 1024x768p @ 60 Hz in established timing I/II
  19. MESS:00:00:01.417071:0: HDMI:EDID standard timings block x 8: 0xB300 8180 8140 7140 0101 0101 0101 0101
  20. MESS:00:00:01.426239:0: HDMI:EDID found DMT format: code 58, 1680x1050p @ 60 Hz (16:10) in standard timing 0
  21. MESS:00:00:01.435779:0: HDMI:EDID found DMT format: code 35, 1280x1024p @ 60 Hz (5:4) in standard timing 1
  22. MESS:00:00:01.445153:0: HDMI:EDID found DMT format: code 32, 1280x960p @ 60 Hz (4:3) in standard timing 2
  23. MESS:00:00:01.454436:0: HDMI:EDID unknown standard timing 1152x864 @ 60 Hz aspect ratio (4:3)
  24. MESS:00:00:01.475645:0: HDMI:EDID parsing v3 CEA extension 0
  25. MESS:00:00:01.479624:0: HDMI:EDID monitor support - underscan IT formats:yes, basic audio:yes, yuv444:yes, yuv422:yes, #native DTD:1
  26. MESS:00:00:01.491261:0: HDMI:EDID found CEA detail timing format: 1920x1080p @ 60 Hz (16)
  27. MESS:00:00:01.499160:0: HDMI:EDID found CEA detail timing format: 1920x1080i @ 60 Hz (5)
  28. MESS:00:00:01.506971:0: HDMI:EDID found CEA detail timing format: 1280x720p @ 60 Hz (4)
  29. MESS:00:00:01.514696:0: HDMI:EDID found CEA detail timing format: 720x480p @ 60 Hz (2)
  30. MESS:00:00:01.522332:0: HDMI:EDID found CEA format: code 16, 1920x1080p @ 60Hz (native)
  31. MESS:00:00:01.530052:0: HDMI:EDID found CEA format: code 4, 1280x720p @ 60Hz
  32. MESS:00:00:01.536911:0: HDMI:EDID found CEA format: code 3, 720x480p @ 60Hz
  33. MESS:00:00:01.543681:0: HDMI:EDID found CEA format: code 1, 640x480p @ 60Hz
  34. MESS:00:00:01.550453:0: HDMI:EDID found CEA format: code 20, 1920x1080i @ 50Hz
  35. MESS:00:00:01.557484:0: HDMI:EDID found CEA format: code 18, 720x576p @ 50Hz
  36. MESS:00:00:01.564341:0: HDMI:EDID found CEA format: code 5, 1920x1080i @ 60Hz
  37. MESS:00:00:01.571287:0: HDMI:EDID found CEA format: code 31, 1920x1080p @ 50Hz
  38. MESS:00:00:01.578318:0: HDMI:EDID found CEA format: code 16, 1920x1080p @ 60Hz
  39. MESS:00:00:01.585348:0: HDMI:EDID found CEA format: code 19, 1280x720p @ 50Hz
  40. MESS:00:00:01.592312:0: HDMI:EDID found audio format 2 channels PCM, sample rate: 32|44|48 kHz, sample size: 16|20|24 bits
  41. MESS:00:00:01.603042:0: HDMI:EDID found HDMI VSDB length 5
  42. MESS:00:00:01.608258:0: HDMI:EDID HDMI VSDB has physical address 1.0.0.0
  43. MESS:00:00:01.614672:0: HDMI:EDID HDMI VSDB has no extension fields
  44. MESS:00:00:01.620688:0: HDMI:EDID filtering formats with pixel clock > 162 MHz or h. blanking > 1023
  45. MESS:00:00:01.629664:0: HDMI:EDID preferred mode remained as CEA (16) 1920x1080p @ 60 Hz with pixel clock 148 MHz
  46. MESS:00:00:01.654510:0: brfs: File read: /mfs/sd/config.txt
  47. MESS:00:00:01.658918:0: HDMI:Setting property pixel encoding to RGB444 full
  48. MESS:00:00:01.665073:0: HDMI:Setting property pixel clock type to PAL
  49. MESS:00:00:01.671233:0: HDMI:Setting property content type flag to No data
  50. MESS:00:00:01.677833:0: HDMI:Setting property fuzzy format match to enabled
  51. MESS:00:00:01.684669:0: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined
  52. MESS:00:00:01.880301:0: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined
  53. MESS:00:00:01.886367:0: hdmi: HDMI:>>>>>>>>>>>>>Rx sensed, reading EDID<<<<<<<<<<<<<
  54. MESS:00:00:01.905591:0: hdmi: HDMI:EDID version 1.3, 1 extensions, screen size 51x29 cm
  55. MESS:00:00:01.911949:0: hdmi: HDMI:EDID features - videodef 0x80 standby suspend active off; colour encoding:RGB444|YCbCr422; sRGB is not default colourspace; preferred format is native; does not support GTF
  56. MESS:00:00:01.930085:0: hdmi: HDMI:EDID found preferred CEA detail timing format: 1920x1080p @ 60 Hz (16)
  57. MESS:00:00:01.939357:0: hdmi: HDMI:EDID found DMT format: code 4, 640x480p @ 60 Hz in established timing I/II
  58. MESS:00:00:01.948988:0: hdmi: HDMI:EDID found DMT format: code 9, 800x600p @ 60 Hz in established timing I/II
  59. MESS:00:00:01.958626:0: hdmi: HDMI:EDID found DMT format: code 16, 1024x768p @ 60 Hz in established timing I/II
  60. MESS:00:00:01.968485:0: hdmi: HDMI:EDID standard timings block x 8: 0xB300 8180 8140 7140 0101 0101 0101 0101
  61. MESS:00:00:01.978178:0: hdmi: HDMI:EDID found DMT format: code 58, 1680x1050p @ 60 Hz (16:10) in standard timing 0
  62. MESS:00:00:01.988238:0: hdmi: HDMI:EDID found DMT format: code 35, 1280x1024p @ 60 Hz (5:4) in standard timing 1
  63. MESS:00:00:01.998133:0: hdmi: HDMI:EDID found DMT format: code 32, 1280x960p @ 60 Hz (4:3) in standard timing 2
  64. MESS:00:00:02.007937:0: hdmi: HDMI:EDID unknown standard timing 1152x864 @ 60 Hz aspect ratio (4:3)
  65. MESS:00:00:02.029666:0: hdmi: HDMI:EDID parsing v3 CEA extension 0
  66. MESS:00:00:02.034171:0: hdmi: HDMI:EDID monitor support - underscan IT formats:yes, basic audio:yes, yuv444:yes, yuv422:yes, #native DTD:1
  67. MESS:00:00:02.046330:0: hdmi: HDMI:EDID found CEA detail timing format: 1920x1080p @ 60 Hz (16)
  68. MESS:00:00:02.054748:0: hdmi: HDMI:EDID found CEA detail timing format: 1920x1080i @ 60 Hz (5)
  69. MESS:00:00:02.063082:0: hdmi: HDMI:EDID found CEA detail timing format: 1280x720p @ 60 Hz (4)
  70. MESS:00:00:02.071327:0: hdmi: HDMI:EDID found CEA detail timing format: 720x480p @ 60 Hz (2)
  71. MESS:00:00:02.079483:0: hdmi: HDMI:EDID found CEA format: code 16, 1920x1080p @ 60Hz (native)
  72. MESS:00:00:02.087724:0: hdmi: HDMI:EDID found CEA format: code 4, 1280x720p @ 60Hz
  73. MESS:00:00:02.095103:0: hdmi: HDMI:EDID found CEA format: code 3, 720x480p @ 60Hz
  74. MESS:00:00:02.102395:0: hdmi: HDMI:EDID found CEA format: code 1, 640x480p @ 60Hz
  75. MESS:00:00:02.109688:0: hdmi: HDMI:EDID found CEA format: code 20, 1920x1080i @ 50Hz
  76. MESS:00:00:02.117239:0: hdmi: HDMI:EDID found CEA format: code 18, 720x576p @ 50Hz
  77. MESS:00:00:02.124617:0: hdmi: HDMI:EDID found CEA format: code 5, 1920x1080i @ 60Hz
  78. MESS:00:00:02.132084:0: hdmi: HDMI:EDID found CEA format: code 31, 1920x1080p @ 50Hz
  79. MESS:00:00:02.139636:0: hdmi: HDMI:EDID found CEA format: code 16, 1920x1080p @ 60Hz
  80. MESS:00:00:02.147187:0: hdmi: HDMI:EDID found CEA format: code 19, 1280x720p @ 50Hz
  81. MESS:00:00:02.154672:0: hdmi: HDMI:EDID found audio format 2 channels PCM, sample rate: 32|44|48 kHz, sample size: 16|20|24 bits
  82. MESS:00:00:02.165922:0: hdmi: HDMI:EDID found HDMI VSDB length 5
  83. MESS:00:00:02.171660:0: hdmi: HDMI:EDID HDMI VSDB has physical address 1.0.0.0
  84. MESS:00:00:02.178594:0: hdmi: HDMI:EDID HDMI VSDB has no extension fields
  85. MESS:00:00:02.185131:0: hdmi: HDMI:EDID filtering formats with pixel clock > 162 MHz or h. blanking > 1023
  86. MESS:00:00:02.194627:0: hdmi: HDMI:EDID preferred mode remained as CEA (16) 1920x1080p @ 60 Hz with pixel clock 148 MHz
  87. MESS:00:00:02.204986:0: hdmi: HDMI: hotplug attached with HDMI support
  88. MESS:00:00:02.211249:0: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
  89. MESS:00:00:02.222390:0: hdmi: HDMI: power_on to CEA mode 1080p60
  90. MESS:00:00:02.227730:0: hdmi: HDMI: warning - sink does not support alternative RGB quantiser range for CEA formats
  91. MESS:00:00:02.238985:0: hdmi: HDMI: Action callback added to queue to happen at frame 2
  92. MESS:00:00:02.245297:0: hdmi: HDMI: Action stop_3d_mode added to queue to happen at frame 2
  93. MESS:00:00:02.253370:0: hdmi: HDMI: Action unmute added to queue to happen at frame 3
  94. MESS:00:00:02.260926:0: hdmi: HDMI: Action cec_init added to queue to happen at frame 3
  95. MESS:00:00:02.289185:0: *** Restart logging
  96. MESS:00:00:02.291675:0: brfs: File read: 596 bytes
  97. MESS:00:00:02.299350:0: brfs: File read: /mfs/sd/cmdline.txt
  98. MESS:00:00:02.303440:0: Read command line from file 'cmdline.txt':
  99. MESS:00:00:02.309212:0: 'boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 xquiet ssh nofsck xdebugging xbreak=mount_storage xbrcmfmac.debug=0x00000040 xtextmode console=ttyAMA0'
  100. MESS:00:00:02.324209:0: brfs: File read: 615 bytes
  101. MESS:00:00:02.760223:0: brfs: File read: /mfs/sd/kernel.img
  102. MESS:00:00:02.764099:0: Loading 'kernel.img' to 0x8000 size 0x6e9f60
  103. MESS:00:00:02.773787:0: No kernel trailer - assuming DT-capable
  104. MESS:00:00:02.778038:0: brfs: File read: 7249760 bytes
  105. MESS:00:00:02.788127:0: brfs: File read: /mfs/sd/bcm2710-rpi-3-b.dtb
  106. MESS:00:00:02.792784:0: Loading 'bcm2710-rpi-3-b.dtb' to 0x6f1f60 size 0x5efe
  107. MESS:00:00:02.934655:0: brfs: File read: 24318 bytes
  108. MESS:00:00:02.940249:0: brfs: File read: /mfs/sd/config.txt
  109. MESS:00:00:02.944165:0: brfs: File read: 596 bytes
  110. MESS:00:00:02.956315:0: brfs: File read: /mfs/sd/overlays/pi3-miniuart-bt.dtbo
  111. MESS:00:00:02.988427:0: Loaded overlay 'pi3-miniuart-bt'
  112. MESS:00:00:03.067840:0: brfs: File read: 1446 bytes
  113. MESS:00:00:03.076061:0: brfs: File read: /mfs/sd/overlays/sdtweak.dtbo
  114. MESS:00:00:03.091107:0: Loaded overlay 'sdtweak'
  115. MESS:00:00:03.094023:0: dtparam: overclock_50=100
  116. MESS:00:00:04.249571:0: gpioman: gpioman_get_pin_num: pin EMMC_ENABLE not defined
  117. MESS:00:00:04.362055:0: Device tree loaded to 0x2bfe9c00 (size 0x6365)
  118. MESS:00:00:04.368350:0: uart: Set PL011 baud rate to 103448.300000 Hz
  119. MESS:00:00:04.374583:0: uart: Baud rate change done...
  120. MESS:00:00:04.377990:0: uart: Baud rate change done...
  121. MESS:00:00:04.383293:0: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined
  122. MESS:00:00:05.290007:0: vchiq_core: vchiq_init_state: slot_zero = 0xeb580000, is_master = 1
  123. MESS:00:00:05.300571:0: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
  124. MESS:00:00:05.311604:0: TV service:host side not connected, dropping notifi0ation 0x0000t0n2, 0x0000000h, 0x00000010
  125.  
  126. [ 0.000000] Linux version 4.14.44 (milhouse@libreelec.tv) (gcc version 7.3.0 (GCC)) #1 SMP Fri Jun 1 21:06:29 BST 2018
  127. [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
  128. [ 0.000000] CPU: div instructions available: patching division code
  129. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  130. [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
  131. [ 0.000000] Memory policy: Data cache writealloc
  132. [ 0.000000] cma: Reserved 8 MiB at 0x2b400000
  133. [ 0.000000] percpu: Embedded 17 pages/cpu @abf95000 s39948 r8192 d21492 u69632
  134. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 178640
  135. [ 0.000000] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 xquiet ssh nofsck xdebugging xbreak=mount_storage xbrcmfmac.debug=0x00000040 xtextmode console=ttyAMA0 root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1
  136. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  137. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  138. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  139. [ 0.000000] Memory: 690784K/720896K available (8192K kernel code, 630K rwdata, 1896K rodata, 3072K init, 420K bss, 21920K reserved, 8192K cma-reserved)
  140. [ 0.000000] Virtual kernel memory layout:
  141. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  142. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  143. [ 0.000000] vmalloc : 0xac800000 - 0xff800000 (1328 MB)
  144. [ 0.000000] lowmem : 0x80000000 - 0xac000000 ( 704 MB)
  145. [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
  146. [ 0.000000] .text : 0x80008000 - 0x80900000 (9184 kB)
  147. [ 0.000000] .init : 0x80b00000 - 0x80e00000 (3072 kB)
  148. [ 0.000000] .data : 0x80e00000 - 0x80e9d964 ( 631 kB)
  149. [ 0.000000] .bss : 0x80e9f000 - 0x80f080c4 ( 421 kB)
  150. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  151. [ 0.000000] ftrace: allocating 28231 entries in 83 pages
  152. [ 0.000000] Hierarchical RCU implementation.
  153. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  154. [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
  155. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  156. [ 0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  157. [ 0.000010] Switching to timer-based delay loop, resolution 52ns
  158. [ 0.000138] Console: colour dummy device 80x30
  159. [ 0.000155] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
  160. [ 0.000164] pid_max: default: 32768 minimum: 301
  161. [ 0.000254] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  162. [ 0.000264] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  163. [ 0.000725] Disabling memory control group subsystem
  164. [ 0.000750] CPU: Testing write buffer coherency: ok
  165. [ 0.000947] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  166. [ 0.001120] Setting up static identity map for 0x100000 - 0x10003c
  167. [ 0.001175] Hierarchical SRCU implementation.
  168. [ 0.002170] smp: Bringing up secondary CPUs ...
  169. [ 0.002508] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  170. [ 0.002857] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  171. [ 0.003187] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  172. [ 0.003231] smp: Brought up 1 node, 4 CPUs
  173. [ 0.003243] SMP: Total of 4 processors activated (153.00 BogoMIPS).
  174. [ 0.003247] CPU: All CPU(s) started in HYP mode.
  175. [ 0.003250] CPU: Virtualization extensions available.
  176. [ 0.003614] devtmpfs: initialized
  177. [ 0.008291] random: get_random_u32 called from bucket_table_alloc+0x120/0x24c with crng_init=0
  178. [ 0.008679] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
  179. [ 0.008787] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
  180. [ 0.008798] futex hash table entries: 1024 (order: 4, 65536 bytes)
  181. [ 0.009087] pinctrl core: initialized pinctrl subsystem
  182. [ 0.009468] NET: Registered protocol family 16
  183. [ 0.010806] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  184. [ 0.012739] cpuidle: using governor ladder
  185. [ 0.012753] cpuidle: using governor menu
  186. [ 0.013102] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  187. [ 0.013108] hw-breakpoint: maximum watchpoint size is 8 bytes.
  188. [ 0.013206] Serial: AMBA PL011 UART driver
  189. [ 0.013981] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  190. [ 0.014193] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
  191. [ 0.028633] bcm2835-dma 3f007000.dma: DMA legacy API manager at ac813000, dmachans=0x1
  192. [ 0.029264] SCSI subsystem initialized
  193. [ 0.029372] usbcore: registered new interface driver usbfs
  194. [ 0.029402] usbcore: registered new interface driver hub
  195. [ 0.029439] usbcore: registered new device driver usb
  196. [ 0.030056] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-06-01 14:05
  197. [ 0.030739] clocksource: Switched to clocksource arch_sys_counter
  198. [ 0.069152] FS-Cache: Loaded
  199. [ 0.073003] NET: Registered protocol family 2
  200. [ 0.073305] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  201. [ 0.073358] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  202. [ 0.073445] TCP: Hash tables configured (established 8192 bind 8192)
  203. [ 0.073513] UDP hash table entries: 512 (order: 2, 16384 bytes)
  204. [ 0.073536] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  205. [ 0.073643] NET: Registered protocol family 1
  206. [ 0.073856] RPC: Registered named UNIX socket transport module.
  207. [ 0.073861] RPC: Registered udp transport module.
  208. [ 0.073865] RPC: Registered tcp transport module.
  209. [ 0.073869] RPC: Registered tcp NFSv4.1 backchannel transport module.
  210. [ 0.143378] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
  211. [ 0.144377] workingset: timestamp_bits=14 max_order=18 bucket_order=4
  212. [ 0.147648] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  213. [ 0.147992] FS-Cache: Netfs 'nfs' registered for caching
  214. [ 0.148265] NFS: Registering the id_resolver key type
  215. [ 0.148282] Key type id_resolver registered
  216. [ 0.148286] Key type id_legacy registered
  217. [ 0.148295] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  218. [ 0.148427] FS-Cache: Netfs 'cifs' registered for caching
  219. [ 0.150959] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  220. [ 0.150967] io scheduler noop registered (default)
  221. [ 0.150971] io scheduler deadline registered
  222. [ 0.151099] io scheduler cfq registered
  223. [ 0.151104] io scheduler mq-deadline registered
  224. [ 0.151109] io scheduler kyber registered
  225. [ 0.151224] io scheduler bfq registered
  226. [ 0.152584] BCM2708FB: allocated DMA memory eb510000
  227. [ 0.152599] BCM2708FB: allocated DMA channel 0 @ ac813000
  228. [ 0.182551] Console: switching to colour frame buffer device 240x67
  229. [ 0.196792] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  230. [ 0.197217] bcm2835-rng 3f104000.rng: hwrng registered
  231. [ 0.197278] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  232. [ 0.197513] vc-sm: Videocore shared memory driver
  233. [ 0.201970] brd: module loaded
  234. [ 0.202037] loop: module loaded
  235. [ 0.210148] usbcore: registered new interface driver rtsx_usb
  236. [ 0.210159] Loading iSCSI transport class v2.0-870.
  237. [ 0.210371] iscsi: registered transport (tcp)
  238. [ 0.210575] libphy: Fixed MDIO Bus: probed
  239. [ 0.210595] tun: Universal TUN/TAP device driver, 1.6
  240. [ 0.210710] usbcore: registered new interface driver lan78xx
  241. [ 0.210759] usbcore: registered new interface driver dm9601
  242. [ 0.210794] usbcore: registered new interface driver smsc95xx
  243. [ 0.210820] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  244. [ 0.438636] Core Release: 2.80a
  245. [ 0.438643] Setting default values for core params
  246. [ 0.438660] Finished setting default values for core params
  247. [ 0.638787] Using Buffer DMA mode
  248. [ 0.638793] Periodic Transfer Interrupt Enhancement - disabled
  249. [ 0.638796] Multiprocessor Interrupt Enhancement - disabled
  250. [ 0.638801] OTG VER PARAM: 0, OTG VER FLAG: 0
  251. [ 0.638811] Dedicated Tx FIFOs mode
  252. [ 0.639013] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xab504000 dma = 0xeb504000 len=9024
  253. [ 0.639029] FIQ FSM acceleration enabled for :
  254. [ 0.639029] Non-periodic Split Transactions
  255. [ 0.639029] Periodic Split Transactions
  256. [ 0.639029] High-Speed Isochronous Endpoints
  257. [ 0.639029] Interrupt/Control Split Transaction hack enabled
  258. [ 0.639066] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x8069e54c
  259. [ 0.639073] WARN::hcd_init_fiq:460: FIQ ASM at 0x8069e8a8 length 36
  260. [ 0.639080] WARN::hcd_init_fiq:486: MPHI regs_base at 0xad079000
  261. [ 0.639108] dwc_otg 3f980000.usb: DWC OTG Controller
  262. [ 0.639125] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  263. [ 0.639143] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
  264. [ 0.639180] Init: Port Power? op_state=1
  265. [ 0.639184] Init: Power Port (0)
  266. [ 0.639281] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  267. [ 0.639288] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  268. [ 0.639294] usb usb1: Product: DWC OTG Controller
  269. [ 0.639300] usb usb1: Manufacturer: Linux 4.14.44 dwc_otg_hcd
  270. [ 0.639305] usb usb1: SerialNumber: 3f980000.usb
  271. [ 0.639588] hub 1-0:1.0: USB hub found
  272. [ 0.639608] hub 1-0:1.0: 1 port detected
  273. [ 0.639972] usbcore: registered new interface driver usb-storage
  274. [ 0.640056] mousedev: PS/2 mouse device common for all mice
  275. [ 0.640221] i2c /dev entries driver
  276. [ 0.640654] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
  277. [ 0.640804] bcm2835-cpufreq: min=1300000 max=1300000
  278. [ 0.640994] sdhci: Secure Digital Host Controller Interface driver
  279. [ 0.640999] sdhci: Copyright(c) Pierre Ossman
  280. [ 0.641183] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
  281. [ 0.641340] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
  282. [ 0.641384] sdhci-pltfm: SDHCI platform and OF driver helper
  283. [ 0.642438] ledtrig-cpu: registered to indicate activity on CPUs
  284. [ 0.642527] hidraw: raw HID events driver (C) Jiri Kosina
  285. [ 0.643159] usbcore: registered new interface driver usbhid
  286. [ 0.643163] usbhid: USB HID core driver
  287. [ 0.643459] vchiq: vchiq_init_state: slot_zero = ab580000, is_master = 0
  288. [ 0.650926] [vc_sm_connected_init]: start
  289. [ 0.665438] [vc_sm_connected_init]: end - returning 0
  290. [ 0.666039] NET: Registered protocol family 10
  291. [ 0.666508] Segment Routing with IPv6
  292. [ 0.666546] NET: Registered protocol family 17
  293. [ 0.666593] Key type dns_resolver registered
  294. [ 0.666880] Registering SWP/SWPB emulation handler
  295. [ 0.670018] uart-pl011 3f201000.serial: cts_event_workaround enabled
  296. [ 0.670070] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
  297. [ 0.844123] Indeed it is in host mode hprt0 = 00021501
  298. [ 0.932138] random: fast init done
  299. [ 1.020753] usb 1-1: new high-speed USB device number 2 using dwc_otg
  300. [ 1.020838] Indeed it is in host mode hprt0 = 00001101
  301. [ 1.217549] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  302. [ 1.217553] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  303. [ 1.217867] hub 1-1:1.0: USB hub found
  304. [ 1.217911] hub 1-1:1.0: 5 ports detected
  305. [ 1.497416] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  306. [ 1.587537] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  307. [ 1.587541] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  308. [ 1.589802] smsc95xx v1.0.6
  309. [ 1.639233] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:44:9f:90
  310. [ 1.727416] usb 1-1.4: new low-speed USB device number 4 using dwc_otg
  311. [ 1.750832] console [ttyAMA0] enabled
  312. [ 1.755495] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
  313. [ 1.761338] mmc-bcm2835 3f300000.mmc: DMA channel allocated
  314. [ 1.797741] sdhost: log_buf @ ab507000 (eb507000)
  315. [ 1.836939] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  316. [ 1.843922] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  317. [ 1.850903] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  318. [ 1.857414] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  319. [ 1.863380] console [netcon0] enabled
  320. [ 1.867041] netconsole: network logging started
  321. [ 1.871569] of_cfs_init
  322. [ 1.888465] usb 1-1.4: New USB device found, idVendor=05a4, idProduct=9881
  323. [ 1.894189] of_cfs_init: OK
  324. [ 1.895315] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  325. [ 1.903610] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  326. [ 1.911024] uart-pl011 3f201000.serial: no DMA platform data
  327. [ 1.919658] Freeing unused kernel memory: 3072K
  328. [ 1.939532] input: HID 05a4:9881 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:05A4:9881.0001/input/input0
  329.  
  330. Welcome to LibreELEC (Milhouse): devel-20180602041714-#0602b-g19b9bed [Build #0602b]!
  331.  
  332. [ OK ] Created slice User and Session Slice.
  333. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  334. [ OK ] Listening on RPCbind Server Activation Socket.
  335. [ OK ] Reached target RPC Port Mapper.
  336. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  337. [ OK ] Started Dispatch Password Requests to Console Directory Watch.
  338. [ OK ] Reached target Slices.
  339. Starting Debug Shell on /dev/console...
  340. [ OK ] Listening on Journal Socket (/dev/log).
  341. [ OK ] Listening on udev Kernel Socket.
  342. [ OK ] Listening on udev Control Socket.
  343. Starting Show Version...
  344. [ OK ] Listening on Journal Socket.
  345. Mounting POSIX Message Queue File System...
  346. Mounting Kernel Debug File System...
  347. Starting Samba Configuration...
  348. [ OK ] Reached target Paths.
  349. Mounting Variable Directory...
  350. LibreELEC (Mil[ OK ] Started Debug Shell on /dev/console.
  351. [ OK ] Started Show Version.
  352. [ OK ] Mounted POSIX Message Queue File System.
  353. [ OK ] Mounted Kernel Debug File System.
  354. [ OK ] Mounted Variable Directory.
  355. Starting Create kernel modules tree from overlays...
  356. [ OK ] Started Samba Configuration.
  357. [ OK ] Started Create kernel modules tree from overlays.
  358. Starting udev Coldplug all Devices...
  359. Starting Remount Root and Kernel File Systems...
  360. Starting Load Kernel Modules...
  361. Starting Mounting swapfile...
  362. Starting Setup machine-id...
  363. Starting Create list of required st…ce nodes for the current kernel...
  364. [ OK ] Started Remount Root and Kernel File Systems.
  365. [ OK ] Started Create list of required sta…vice nodes for the current kernel.
  366. [ OK ] Started Setup machine-id.
  367. LibreELEC:~ # Starting Journal Service...
  368. Starting Create Static Device Nodes in /dev...
  369. [ OK ] Started Load Kernel Modules.
  370. Mounting Kernel Configuration File System...
  371. Starting Apply Kernel Variables...
  372. [ OK ] Started Create Static Device Nodes in /dev.
  373. [ OK ] Reached target Local File Systems (Pre).
  374. [ OK ] Mounted Kernel Configuration File System.
  375. [ OK ] Started Journal Service.
  376. [ OK ] Started Apply Kernel Variables.
  377. Starting Flush Journal to Persistent Storage...
  378. [ OK ] Started Flush Journal to Persistent Storage.
  379. [ OK ] Started udev Coldplug all Devices.
  380. [ OK ] Started Mounting swapfile.
  381. [ OK ] Reached target Swap.
  382. Mounting Temporary Directory (/tmp)...
  383. [ OK ] Mounted Temporary Directory (/tmp).
  384. [ OK ] Reached target Local File Systems.
  385. Starting Create Volatile Files and Directories...
  386. Starting Rebuild Journal Catalog...
  387. [ OK ] Started Rebuild Journal Catalog.
  388. [ OK ] Started Create Volatile Files and Directories.
  389. Starting Setup User cache dir...
  390. Starting Setup User config dir...
  391. Starting Add random entropy from file...
  392. Starting Setup Timezone data...
  393. Starting Update hwdb.bin...
  394. Starting RPC Bind...
  395. [ OK ] Started Setup Timezone data.
  396. [ OK ] Started Setup User cache dir.
  397. [ OK ] Started RPC Bind.
  398. [ OK ] Started Setup User config dir.
  399. [ OK ] Started Add random entropy from file.
  400. [ OK ] Started Update hwdb.bin.
  401. Starting udev Kernel Device Manager...
  402. [ OK ] Started udev Kernel Device Manager.
  403. [ OK ] Reached target System Initialization.
  404. [ OK ] Listening on lircd.socket.
  405. [ OK ] Started Daily Cleanup of Temporary Directories.
  406. [ OK ] Reached target Timers.
  407. [ OK ] Listening on D-Bus System Message Bus Socket.
  408. [ OK ] Reached target Sockets.
  409. [ OK ] Reached target Basic System.
  410. Starting unbind Framebuffer console...
  411. [ OK ] Started D-Bus System Message Bus.
  412. Starting Connection service...
  413. Starting OpenSSH server daemon...
  414. Starting PulseAudio Sound Service...
  415. [ OK ] Started Kodi usage tracking script.
  416. Starting IPTABLES Packet Filtering...
  417. Starting Kodi clean debug logs...
  418. [ OK ] Started Eventlirc server daemon.
  419. Starting Login Service...
  420. [ OK ] Started unbind Framebuffer console.
  421. [ OK ] Started Kodi clean debug logs.
  422. [ OK ] Started OpenSSH server daemon.
  423. [ OK ] Started Login Service.
  424. [ OK ] Started Connection service.
  425. [ OK ] Started PulseAudio Sound Service.
  426. Starting WPA supplicant...
  427. Starting Hostname Service...
  428. [ OK ] Started WPA supplicant.
  429. [ OK ] Started Hostname Service.
  430. [ OK ] Started IPTABLES Packet Filtering.
  431. [ OK ] Reached target Network.
  432. [ OK ] Started Avahi Daemon.
  433. Starting Samba SMB Daemon...
  434. Starting Samba NMB Daemon...
  435. [ OK ] Reached target Network is Online.
  436. [ OK ] Started Broadcom sdio firmware update for BCM43430A1.
  437. [ OK ] Started Samba NMB Daemon.
  438. [ OK ] Started Samba SMB Daemon.
  439. [ OK ] Reached target Multi-User System.
  440. [ OK ] Reached target Graphical Interface.
  441. Starting Kodi user autostart script...
  442. [ OK ] Started Kodi user autostart script.
  443. Starting Kodi Media Center...
  444. [ OK ] Started Kodi Media Center.
  445. [ OK ] Reached target Kodi Mediacenter Interface.
  446. MESS:00:00:20.530213:0: hdmi: HDMI:Setting property pixel clock type to PAL
  447. MESS:00:00:20.535502:0: hdmi: HDMI: power_on to CEA mode 1080p60
  448. MESS:00:00:20.726339:0: hdmi: HDMI:Setting property pixel clock type to PAL
  449. MESS:00:00:20.731624:0: hdmi: HDMI: power_on to CEA mode 1080p60
  450. [ 21.390629] Internal error: Oops: 5 [#1] SMP ARM
  451. [ 21.395244] Modules linked in: ip6table_mangle ip6table_nat nf_nat_ipv6 ip6t_REJECT nf_reject_ipv6 8021q nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables iptable_nat nf_nat_ipv4 nf_nat ipt_REJECT nf_reject_ipv4 iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter brcmfmac ip_tables brcmutil x_tables cfg80211 rfkill bcm2835_gpiomem fixed
  452. [ 21.429176] CPU: 0 PID: 700 Comm: LanguageInvoker Not tainted 4.14.44 #1
  453. [ 21.435870] Hardware name: BCM2835
  454. [ 21.439263] task: a5b21f40 task.stack: a585a000
  455. [ 21.443791] PC is at __d_lookup_rcu+0x68/0x198
  456. [ 21.448231] LR is at lookup_fast+0x4c/0x2dc
  457. [ 21.452406] pc : [<8029a398>] lr : [<8028b18c>] psr: 280e0013
  458. [ 21.458663] sp : a585bd10 ip : 80e04490 fp : a585bd4c
  459. [ 21.463878] r10: a585bd9c r9 : 00000004 r8 : fae8de54
  460. [ 21.469094] r7 : 9a46c3b8 r6 : 9a46c3b8 r5 : 12000000 r4 : 57000d00
  461. [ 21.475612] r3 : 4c006dcb r2 : abf11000 r1 : aa102065 r0 : 9a46c3b8
  462. [ 21.482131] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
  463. [ 21.489257] Control: 10c5383d Table: 25afc06a DAC: 00000055
  464. [ 21.494995] Process LanguageInvoker (pid: 700, stack limit = 0xa585a210)
  465. [ 21.501688] Stack: (0xa585bd10 to 0xa585c000)
  466. [ 21.506039] bd00: a585be10 fae8de54 a585bd5c aa102065
  467. [ 21.514209] bd20: a585bd74 a585be08 00000000 a585bda0 9a46c3b8 a585bd98 aa983510 a585bd9c
  468. [ 21.522379] bd40: a585bd8c a585bd50 8028b18c 8029a33c aa102065 a585be08 a585bd74 a585bd68
  469. [ 21.530549] bd60: 8028bd14 a585be08 00000000 00000000 a585bee8 a585bee8 a585bf28 00000000
  470. [ 21.538721] bd80: a585bdd4 a585bd90 8028d330 8028b14c a585be08 80808080 a585be08 aa102010
  471. [ 21.546892] bda0: a585bdd4 a585bdb0 8028a31c a585be08 aa102010 00000000 a585bee8 a585bee8
  472. [ 21.555062] bdc0: a585bf28 00000000 a585be04 a585bdd8 8028dbcc 8028d300 a585be48 a59f8240
  473. [ 21.563232] bde0: 00000055 00000040 00000001 aa102000 a585be08 00000001 a585beb4 a585be08
  474. [ 21.571403] be00: 8028faac 8028db4c aa983510 9a46c3b8 fae8de54 00000004 aa102065 ffffe000
  475. [ 21.579574] be20: a9e68310 aa6ff6e8 9a4cb5d0 00000041 00000002 00000222 00000000 00000000
  476. [ 21.587748] be40: 00000000 a585be48 8026c7c4 8089539c 014000c0 0006f857 6f857000 00000001
  477. [ 21.595919] be60: 80e044a0 aa102000 80e044a0 6f8907a0 00000000 00000001 aa102000 00000000
  478. [ 21.604090] be80: 8028f7d4 00000002 ffffff9c 00000001 ffffff9c 00000001 ffffff9c a585bee8
  479. [ 21.612261] bea0: ffffff9c 6f8907a0 a585bedc a585beb8 8028fbf4 8028fa18 00000000 80899b14
  480. [ 21.620431] bec0: 9a58bb28 665ec448 00000001 00000800 a585bf1c a585bee0 80284c70 8028fbac
  481. [ 21.628603] bee0: 00000000 a585bfb0 00000000 00000000 a585bfac 665ec448 00000000 6f8907a0
  482. [ 21.636773] bf00: 000000c3 80108f04 a585a000 00000000 a585bfa4 a585bf20 8028537c 80284c14
  483. [ 21.644944] bf20: 000007ff a58616c8 a58616c0 00000000 80d85e44 8051ea80 a585bf5c a585bf48
  484. [ 21.653114] bf40: 8051ea80 80125428 80d85e44 00000000 a585bf6c a585bf60 80125428 80178324
  485. [ 21.661284] bf60: a585bf94 a585bf70 80169900 8012538c 00000000 28070010 ffffffff 10c5383d
  486. [ 21.669455] bf80: 10c5387d 00000000 a585bfac a585bf98 801014f0 00000000 00000000 a585bfa8
  487. [ 21.677629] bfa0: 80108d60 80285350 00000000 00000000 6f8907a0 665ec448 665ec448 0000000b
  488. [ 21.685800] bfc0: 00000000 00000000 6f8907a0 000000c3 00000054 00000059 5d7cbad0 752b6480
  489. [ 21.693980] bfe0: 752b6494 665ec40c 7518e53c 74d60628 280e0010 6f8907a0 6c696d61 05002e79
  490. [ 21.702150] Backtrace:
  491. [ 21.704596] [<8029a330>] (__d_lookup_rcu) from [<8028b18c>] (lookup_fast+0x4c/0x2dc)
  492. [ 21.712335] r10:a585bd9c r9:aa983510 r8:a585bd98 r7:9a46c3b8 r6:a585bda0 r5:00000000
  493. [ 21.720167] r4:a585be08
  494. [ 21.722702] [<8028b140>] (lookup_fast) from [<8028d330>] (walk_component+0x3c/0x2f0)
  495. [ 21.730438] r10:00000000 r9:a585bf28 r8:a585bee8 r7:a585bee8 r6:00000000 r5:00000000
  496. [ 21.738258] r4:a585be08
  497. [ 21.740786] [<8028d2f4>] (walk_component) from [<8028dbcc>] (path_lookupat+0x8c/0x1f0)
  498. [ 21.748695] r10:00000000 r9:a585bf28 r8:a585bee8 r7:a585bee8 r6:00000000 r5:aa102010
  499. [ 21.756516] r4:a585be08
  500. [ 21.759046] [<8028db40>] (path_lookupat) from [<8028faac>] (filename_lookup+0xa0/0xfc)
  501. [ 21.766957] r7:00000001 r6:a585be08 r5:aa102000 r4:00000001
  502. [ 21.772610] [<8028fa0c>] (filename_lookup) from [<8028fbf4>] (user_path_at_empty+0x54/0x5c)
  503. [ 21.780954] r8:6f8907a0 r7:ffffff9c r6:a585bee8 r5:ffffff9c r4:00000001
  504. [ 21.787649] [<8028fba0>] (user_path_at_empty) from [<80284c70>] (vfs_statx+0x68/0xc4)
  505. [ 21.795471] r6:00000800 r5:00000001 r4:665ec448
  506. [ 21.800085] [<80284c08>] (vfs_statx) from [<8028537c>] (SyS_stat64+0x38/0x54)
  507. [ 21.807215] r10:00000000 r9:a585a000 r8:80108f04 r7:000000c3 r6:6f8907a0 r5:00000000
  508. [ 21.815036] r4:665ec448
  509. [ 21.817567] [<80285344>] (SyS_stat64) from [<80108d60>] (ret_fast_syscall+0x0/0x28)
  510. [ 21.825213] r4:00000000
  511. [ 21.827741] Code: ea00004a e5944000 e3540000 0a000047 (e5145004)
  512. [ 21.834239] ---[ end trace ed684f8ab675bce6 ]---
  513. [ 118.966836] Alignment trap: not handling instruction e1913f9f at [<74f209fc>]
  514. [ 118.974012] Unhandled fault: alignment exception (0x001) at 0x0190fffd
  515. [ 118.980547] pgd = a5afc000
  516. [ 118.983253] [0190fffd] *pgd=2583e835, *pte=1d5b75df, *ppte=1d5b7e7e
  517. MESS:00:02:04.222679:0: *** No KHAN handle found for pid 672
  518. [ 133.823404] Unable to handle kernel NULL pointer dereference at virtual address 00000002
  519. [ 133.831512] pgd = a59f8000
  520. [ 133.834232] [00000002] *pgd=1940e835, *pte=00000000, *ppte=00000000
  521. [ 133.840508] Internal error: Oops: 17 [#2] SMP ARM
  522. [ 133.845203] Modules linked in: ip6table_mangle ip6table_nat nf_nat_ipv6 ip6t_REJECT nf_reject_ipv6 8021q nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables iptable_nat nf_nat_ipv4 nf_nat ipt_REJECT nf_reject_ipv4 iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter brcmfmac ip_tables brcmutil x_tables cfg80211 rfkill bcm2835_gpiomem fixed
  523. [ 133.879130] CPU: 1 PID: 756 Comm: kodi.bin Tainted: G D 4.14.44 #1
  524. [ 133.886429] Hardware name: BCM2835
  525. [ 133.889821] task: a5a5ea40 task.stack: a58ee000
  526. [ 133.894347] PC is at __d_lookup_rcu+0x68/0x198
  527. [ 133.898782] LR is at lookup_fast+0x4c/0x2dc
  528. [ 133.902956] pc : [<8029a398>] lr : [<8028b18c>] psr: 200f0013
  529. [ 133.909213] sp : a58efd10 ip : 80e04490 fp : a58efd4c
  530. [ 133.914428] r10: a58efd9c r9 : 00000005 r8 : faef414e
  531. [ 133.919644] r7 : aa423000 r6 : aa423000 r5 : 00000000 r4 : 00000006
  532. [ 133.926162] r3 : 0001f5de r2 : abf11000 r1 : aa9a7015 r0 : aa423000
  533. [ 133.932681] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
  534. [ 133.939807] Control: 10c5383d Table: 259f806a DAC: 00000055
  535. [ 133.945544] Process kodi.bin (pid: 756, stack limit = 0xa58ee210)
  536. [ 133.951628] Stack: (0xa58efd10 to 0xa58f0000)
  537. [ 133.955977] fd00: a58efe10 faef414e a58efd5c aa9a7015
  538. [ 133.964147] fd20: a58efd74 a58efe08 00000000 a58efda0 aa423000 a58efd98 aa983210 a58efd9c
  539. [ 133.972317] fd40: a58efd8c a58efd50 8028b18c 8029a33c aa9a7015 a58efe08 a58efd74 a58efd68
  540. [ 133.980487] fd60: 8028bd14 a58efe08 00000000 00000000 a58efee8 a58efee8 a58eff28 00000000
  541. [ 133.988657] fd80: a58efdd4 a58efd90 8028d330 8028b14c a58efe08 80808080 a58efe08 aa9a7010
  542. [ 133.996827] fda0: a58efdd4 a58efdb0 8028a31c a58efe08 aa9a7010 00000000 a58efee8 a58efee8
  543. [ 134.004997] fdc0: a58eff28 00000000 a58efe04 a58efdd8 8028dbcc 8028d300 a58efee8 a58eff28
  544. [ 134.013167] fde0: a58efe04 a58efdf0 00000001 aa9a7000 a58efe08 00000001 a58efeb4 a58efe08
  545. [ 134.021338] fe00: 8028faac 8028db4c aa983210 aa423000 faef414e 00000005 aa9a7015 80e1b778
  546. [ 134.029507] fe20: a9e68310 aa6ff6e8 aa99e030 00000041 00000002 00000288 00000000 00000000
  547. [ 134.037678] fe40: 00000000 a58efe48 8026c7c4 8089539c a9837b40 a58eff08 a8dae4a4 00000001
  548. [ 134.045848] fe60: 80e044a0 aa9a7000 80e044a0 7e8e9f60 00000000 00000001 aa9a7000 00000000
  549. [ 134.054018] fe80: 8028f7d4 00000002 ffffff9c 00000001 ffffff9c 00000001 ffffff9c a58efee8
  550. [ 134.062188] fea0: ffffff9c 7e8e9f60 a58efedc a58efeb8 8028fbf4 8028fa18 00000000 80a16ca8
  551. [ 134.070359] fec0: 00080040 7e8e9ee0 00000001 00000800 a58eff1c a58efee0 80284c70 8028fbac
  552. [ 134.078529] fee0: 00000000 802a2b8c a9837b40 a8dae3b8 a9e68310 7e8e9ee0 7e8e9f60 00000000
  553. [ 134.086699] ff00: 000000c3 80108f04 a58ee000 00000000 a58effa4 a58eff20 8028537c 80284c14
  554. [ 134.094869] ff20: 000007ff a9837b48 a9837b40 00000000 a5a5ee84 a5a5ea40 a5a5ee98 80e9fe74
  555. [ 134.103039] ff40: a58eff64 a58eff50 80899e3c 801d0680 00000000 a5a5ee84 a58eff8c a58eff68
  556. [ 134.111209] ff60: 8013e140 801d064c 00000004 ffffe000 80108f04 8010c540 00000004 ffffe000
  557. [ 134.119379] ff80: a58effac a58eff90 8010c4d0 801d0680 0174a7d8 00000000 00000000 a58effa8
  558. [ 134.127549] ffa0: 80108d60 80285350 00000000 7e8e9f60 7e8e9f60 7e8e9ee0 7e8e9ee0 7e8e9f6a
  559. [ 134.135719] ffc0: 00000000 7e8e9f60 00000000 000000c3 0000000c 7e8ea054 0156fd34 00e001a8
  560. [ 134.143890] ffe0: 00e00c90 7e8e9edc 00a167ac 74d4b628 200f0010 7e8e9f60 00000000 00000000
  561. [ 134.152056] Backtrace:
  562. [ 134.154500] [<8029a330>] (__d_lookup_rcu) from [<8028b18c>] (lookup_fast+0x4c/0x2dc)
  563. [ 134.162238] r10:a58efd9c r9:aa983210 r8:a58efd98 r7:aa423000 r6:a58efda0 r5:00000000
  564. [ 134.170058] r4:a58efe08
  565. [ 134.172586] [<8028b140>] (lookup_fast) from [<8028d330>] (walk_component+0x3c/0x2f0)
  566. [ 134.180322] r10:00000000 r9:a58eff28 r8:a58efee8 r7:a58efee8 r6:00000000 r5:00000000
  567. [ 134.188141] r4:a58efe08
  568. [ 134.190669] [<8028d2f4>] (walk_component) from [<8028dbcc>] (path_lookupat+0x8c/0x1f0)
  569. [ 134.198579] r10:00000000 r9:a58eff28 r8:a58efee8 r7:a58efee8 r6:00000000 r5:aa9a7010
  570. [ 134.206398] r4:a58efe08
  571. [ 134.208925] [<8028db40>] (path_lookupat) from [<8028faac>] (filename_lookup+0xa0/0xfc)
  572. [ 134.216834] r7:00000001 r6:a58efe08 r5:aa9a7000 r4:00000001
  573. [ 134.222487] [<8028fa0c>] (filename_lookup) from [<8028fbf4>] (user_path_at_empty+0x54/0x5c)
  574. [ 134.230831] r8:7e8e9f60 r7:ffffff9c r6:a58efee8 r5:ffffff9c r4:00000001
  575. [ 134.237526] [<8028fba0>] (user_path_at_empty) from [<80284c70>] (vfs_statx+0x68/0xc4)
  576. [ 134.245348] r6:00000800 r5:00000001 r4:7e8e9ee0
  577. [ 134.249960] [<80284c08>] (vfs_statx) from [<8028537c>] (SyS_stat64+0x38/0x54)
  578. [ 134.257089] r10:00000000 r9:a58ee000 r8:80108f04 r7:000000c3 r6:00000000 r5:7e8e9f60
  579. [ 134.264908] r4:7e8e9ee0
  580. [ 134.267438] [<80285344>] (SyS_stat64) from [<80108d60>] (ret_fast_syscall+0x0/0x28)
  581. [ 134.275084] r4:00000000
  582. [ 134.277610] Code: ea00004a e5944000 e3540000 0a000047 (e5145004)
  583. [ 134.283708] ---[ end trace ed684f8ab675bce7 ]---
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!