========================= RosiePi ==========================
Initiating rosiepi...
------------------------------------------------------------
 - Date/Time: 15-Jun-2019,21:27:17
 - Test commit: 6d388a34eb909e27acd508dc001ae1fe94a530de
 - Test board: metro_m4_express
============================================================
Connecting to: metro_m4_express
------------------------------------------------------------
Connected!
Board info:
 - Serial Number: 87AA108115E47535020202D4736380FF
 - Disk Drive: /media/sommersoft/CIRCUITPY
============================================================
Preparing Firmware...
------------------------------------------------------------
Fetching 6d388a34eb909e27acd508dc001ae1fe94a530de...
Checking out 6d388a34eb909e27acd508dc001ae1fe94a530de...
Updating submodules...
Building firmware...
 - 234956 bytes free in flash out of 499712 bytes ( 488.0 kb ).
 - 178744 bytes free in ram for stack out of 196608 bytes ( 192.0 kb ).
 - Wrote 529920 bytes to /home/sommersoft/Dev/rosie_pi/RosiePi/rosiepi/.fw_builds/6d388/metro_m4_express/firmware.uf2.
============================================================
Updating Firmware on: metro_m4_express
Resetting into bootloader mode...
In bootloader mode. Current bootloader: UF2 Bootloader v2.0.0-adafruit.5 SFHWRO
Uploading firmware...
Waiting for board to reload...
Firmware upload successful!
============================================================
Gathering tests to run...
These following tests will be run:
 - board_test.py, rosie_test.py
============================================================
Starting test: board_test.py
running line: (1) import board
running line: (3) #$ output=microcontroller.pin.D0
running line: (4) print(board.D0)
- Testing for output of: microcontroller.pin.D0
 - Passed!
b'\x01Auto-reload is on. Simply save files over USB to run them or enter REPL to disable.\r\n\n
Press any key to enter the REPL. Use CTRL-D to reload.\r\nAdafruit CircuitPython 6d388a34e on
2019-06-15; Adafruit Metro M4 Express with samd51j19\r\n>\x01\x04>> \r\nraw REPL; CTRL-B to exit
\r\n>OK\r\nsoft reboot\r\n\nAuto-reload is on. Simply save files over USB to run them or enter
REPL to disable.\r\n\n\n\nPress any key to enter the REPL. Use CTRL-D to reload.\x01raw REPL;
CTRL-B to exit\r\n>import board\n\x04OK\x04\x04>\x01raw REPL; CTRL-B to exit\r\n>#$ output=
microcontroller.pin.D0\n\x04OK\x04\x04print(board.D0)\n\x04>OKmicrocontroller.pin.D0\r\n\x04\x04'
------------------------------------------------------------
Starting test: rosie_test.py
running line: (1) import board
running line: (3) #$ output=Hello World
running line: (4) print("Hello World")
- Testing for output of: Hello World
 - Passed!
running line: (6) #$ input=16
running line: (7) result = input()
- Sending input: 16
running line: (9) #$ output=16
running line: (10) print(result)
- Testing for output of: 16
 - Passed!
running line: (12) #$ verify=test_stub.foo
running line: (13) print("testing verifier")
- Verifying with: test_stub.foo
D pins: ['D0', 'D1', 'D10', 'D11', 'D12', 'D13', 'D2', 'D3', 'D4', 'D5', 'D6', 'D7', 'D8', 'D9']
pin: D0 - direction: b'digitalio.Direction.INPUT\r\n'
pin: D1 - direction: b'digitalio.Direction.INPUT\r\n'
pin: D10 - direction: b'digitalio.Direction.INPUT\r\n'
pin: D11 - direction: b'digitalio.Direction.INPUT\r\n'
pin: D12 - direction: b'digitalio.Direction.INPUT\r\n'
pin: D13 - direction: b'digitalio.Direction.INPUT\r\n'
pin: D2 - direction: b'digitalio.Direction.INPUT\r\n'
pin: D3 - direction: b'digitalio.Direction.INPUT\r\n'
pin: D4 - direction: b'digitalio.Direction.INPUT\r\n'
pin: D5 - direction: b'digitalio.Direction.INPUT\r\n'
pin: D6 - direction: b'digitalio.Direction.INPUT\r\n'
pin: D7 - direction: b'digitalio.Direction.INPUT\r\n'
pin: D8 - direction: b'digitalio.Direction.INPUT\r\n'
pin: D9 - direction: b'digitalio.Direction.INPUT\r\n'
 - Passed!
b'\r\x03\x03\r\x02\r\n\r\nAdafruit CircuitPython 6d388a34e on 2019-06-15; Adafruit Metro M4
Express with samd51j19\r\n>>> \x01\r\nraw REPL; CTRL-B to exit\r\n>\x01\x04raw REPL; CTRL-B
to exit\r\n>OK\r\nsoft reboot\r\n\nAuto-reload is on. Simply save files over USB to run them
or enter REPL to disable.\r\n\n\n\nPress any key to enter the REPL. Use CTRL-D to reload.\x01
raw REPL; CTRL-B to exit\r\n>import board\n\x04OK\x04\x04>\x01raw REPL; CTRL-B to exit\r\n>#$
output=Hello World\n\x04OK\x04\x04print("Hello World")\n\x04>OKHello World\r\n\x04\x04>\x01raw
REPL; CTRL-B to exit\r\n>#$ input=16\n\x04OK\x04\x04result = input()\n\x04>OK16\r\n16\r\n\x04
\x04>\x01raw REPL; CTRL-B to exit\r\n>#$ output=16\n\x04OK\x04\x04print(result)\n\x04>OK16\r\n
\x04\x04>\x01raw REPL; CTRL-B to exit\r\n>#$ verify=test_stub.foo\n\x04OK\x04\x04print("testing
verifier")\n\x04>OKtesting verifier\r\n\x04\x04print(dir(board))\x04>OK[\'__class__\', \'A0\',
\'A1\', \'A2\', \'A3\', \'A4\', \'A5\', \'D0\', \'D1\', \'D10\', \'D11\', \'D12\', \'D13\',
\'D2\', \'D3\', \'D4\', \'D5\', \'D6\', \'D7\', \'D8\', \'D9\', \'I2C\', \'LED_RX\', \'LED_TX\',
\'MISO\', \'MOSI\', \'NEOPIXEL\', \'RX\', \'SCK\', \'SCL\', \'SDA\', \'SPI\', \'TX\', \'UART\']
\r\n\x04\x04import digitalio\x04>OKD0_pin = digitalio.DigitalInOut(board.D0)\x04\x04\x04>OKprint
(D0_pin.direction)\x04\x04\x04>OKdigitalio.Direction.INPUT\r\n\x04\x04D1_pin = digitalio.
DigitalInOut(board.D1)\x04>OKprint(D1_pin.direction)\x04\x04\x04>OKdigitalio.Direction.INPUT\r\n
\x04\x04D10_pin = digitalio.DigitalInOut(board.D10)\x04>OKprint(D10_pin.direction)\x04\x04\x04
>OKdigitalio.Direction.INPUT\r\n\x04\x04D11_pin = digitalio.DigitalInOut(board.D11)\x04>OKprint
(D11_pin.direction)\x04\x04\x04>OKdigitalio.Direction.INPUT\r\n\x04\x04D12_pin = digitalio.
DigitalInOut(board.D12)\x04>OKprint(D12_pin.direction)\x04\x04\x04>OKdigitalio.Direction.INPUT
\r\n\x04\x04D13_pin = digitalio.DigitalInOut(board.D13)\x04>OKprint(D13_pin.direction)\x04\x04
\x04>OKdigitalio.Direction.INPUT\r\n\x04\x04D2_pin = digitalio.DigitalInOut(board.D2)\x04>OKprint
(D2_pin.direction)\x04\x04\x04>OKdigitalio.Direction.INPUT\r\n\x04\x04D3_pin = digitalio.
DigitalInOut(board.D3)\x04>OKprint(D3_pin.direction)\x04\x04\x04>OKdigitalio.Direction.INPUT\r\n
\x04\x04D4_pin = digitalio.DigitalInOut(board.D4)\x04>OKprint(D4_pin.direction)\x04\x04\x04>OK
digitalio.Direction.INPUT\r\n\x04\x04D5_pin = digitalio.DigitalInOut(board.D5)\x04>OKprint
(D5_pin.direction)\x04\x04\x04>OKdigitalio.Direction.INPUT\r\n\x04\x04D6_pin = digitalio.
DigitalInOut(board.D6)\x04>OKprint(D6_pin.direction)\x04\x04\x04>OKdigitalio.Direction.INPUT\r\
n\x04\x04D7_pin = digitalio.DigitalInOut(board.D7)\x04>OKprint(D7_pin.direction)\x04\x04\x04>
OKdigitalio.Direction.INPUT\r\n\x04\x04D8_pin = digitalio.DigitalInOut(board.D8)\x04>OKprint
(D8_pin.direction)\x04\x04\x04>OKdigitalio.Direction.INPUT\r\n\x04\x04D9_pin = digitalio.
DigitalInOut(board.D9)\x04>OKprint(D9_pin.direction)\x04\x04\x04>OKdigitalio.Direction.INPUT\r\n
\x04\x04'
------------------------------------------------------------
Ran 2 of 2 tests.
 - Passed: 2
 - Failed: 0
============================================================