API tools faq
paste
simhavcs

sda845_v5.4

simhavcs
Nov 14th, 2019
56
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 15.18 KB | None | 0 0
raw download clone embed print report
  1.  
  2. Handling Cmd: download:00ecf000
  3. Download Finished
  4. Handling Cmd: boot
  5. Loading Image Start : 11128 ms
  6. No dtbo partition is found, Skip dtbo
  7. Exit key detection timer
  8. No Ffbm cookie found, ignore: Not Found
  9. Memory Base Address: 0x80000000
  10. Decompressing kernel image start: 11137 ms
  11. Decompressing kernel image done: 13800 ms
  12. dtbo partition does not exit
  13. Cmdline: root=/dev/disk/by-partlabel/rootfs rw rootwait console=tty0 console=ttyMSM0,115200n8 loglevel=10 log_buf_len=4M m
  14. BootLinux: failed to get dtbo image
  15. DTB offset is incorrect, kernel image does not have appended DTB
  16. RAM Partitions
  17. Add Base: 0x0000000080000000 Available Length: 0x00000000FDFA0000
  18. WARNING: Could not find mem-offline node.
  19. ERROR: Could not get splash memory region node
  20. kaslr-Seed is added to chosen node
  21.  
  22. Shutting Down UEFI Boot Services: 13905 ms
  23. BDS: LogFs sync skipped, Unsupported
  24. App Log Flush : 33 ms
  25. Exit BS [14091] UEFI End
  26. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x517f803c]
  27. [ 0.000000] Linux version 5.4.0-qcomlt-arm64-dev (inforce@inforce-server-Z9PE-D8-WS) (gcc version 6.3.1 20170109 (Lina9
  28. [ 0.000000] Machine model: Thundercomm Dragonboard 845c
  29. [ 0.000000] efi: Getting EFI parameters from FDT:
  30. [ 0.000000] efi: UEFI not found.
  31. [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000
  32. [ 0.000000] NUMA: No NUMA configuration found
  33. [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000017df9ffff]
  34. [ 0.000000] NUMA: NODE_DATA [mem 0x17d7ba800-0x17d7bbfff]
  35. [ 0.000000] Zone ranges:
  36. [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000ffffffff]
  37. [ 0.000000] Normal [mem 0x0000000100000000-0x000000017df9ffff]
  38. [ 0.000000] Movable zone start for each node
  39. [ 0.000000] Early memory node ranges
  40. [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000856fffff]
  41. [ 0.000000] node 0: [mem 0x0000000085d00000-0x0000000085dfffff]
  42. [ 0.000000] node 0: [mem 0x0000000085f00000-0x0000000085fbffff]
  43. [ 0.000000] node 0: [mem 0x0000000089100000-0x000000008aafffff]
  44. [ 0.000000] node 0: [mem 0x000000008c417000-0x000000008c4fffff]
  45. [ 0.000000] node 0: [mem 0x0000000097c00000-0x000000017df9ffff]
  46. [ 0.000000] Zeroed struct page in unavailable ranges: 512 pages
  47. [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000017df9ffff]
  48. [ 0.000000] On node 0 totalpages: 972617
  49. [ 0.000000] DMA32 zone: 7135 pages used for memmap
  50. [ 0.000000] DMA32 zone: 0 pages reserved
  51. [ 0.000000] DMA32 zone: 456617 pages, LIFO batch:63
  52. [ 0.000000] Normal zone: 8063 pages used for memmap
  53. [ 0.000000] Normal zone: 516000 pages, LIFO batch:63
  54. [ 0.000000] psci: probing for conduit method from DT.
  55. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  56. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  57. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  58. [ 0.000000] psci: SMC Calling Convention v1.0
  59. [ 0.000000] psci: OSI mode supported.
  60. [ 0.000000] percpu: Embedded 22 pages/cpu s52952 r8192 d28968 u90112
  61. [ 0.000000] pcpu-alloc: s52952 r8192 d28968 u90112 alloc=22*4096
  62. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  63. [ 0.000000] Detected VIPT I-cache on CPU0
  64. [ 0.000000] CPU features: detected: GIC system register CPU interface
  65. [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
  66. [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  67. [ 0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
  68. [ 0.000000] CPU features: detected: Hardware dirty bit management
  69. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 957419
  70. [ 0.000000] Policy zone: Normal
  71. [ 0.000000] Kernel command line: root=/dev/disk/by-partlabel/rootfs rw rootwait console=tty0 console=ttyMSM0,115200n8 :
  72. [ 0.000000] printk: log_buf_len: 4194304 bytes
  73. [ 0.000000] printk: early log buf free: 127832(97%)
  74. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  75. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  76. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  77. [ 0.000000] software IO TLB: mapped [mem 0xfa000000-0xfe000000] (64MB)
  78. [ 0.000000] Memory: 3675436K/3890468K available (11964K kernel code, 1860K rwdata, 6412K rodata, 5056K init, 452K bss,)
  79. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  80. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  81. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
  82. [ 0.000000] Tasks RCU enabled.
  83. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  84. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
  85. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  86. [ 0.000000] GICv3: 988 SPIs implemented
  87. [ 0.000000] GICv3: 0 Extended SPIs implemented
  88. [ 0.000000] GICv3: Distributor has no Range Selector support
  89. [ 0.000000] GICv3: 16 PPIs implemented
  90. [ 0.000000] GICv3: no VLPI support, no direct LPI support
  91. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017a60000
  92. [ 0.000000] ITS: No ITS available, not enabling LPIs
  93. [ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x458 with crng_init=0
  94. [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
  95. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  96. [ 0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  97. [ 0.000319] Console: colour dummy device 80x25
  98. [ 0.000757] printk: console [tty0] enabled
  99. [ 0.000843] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
  100. [ 0.000861] pid_max: default: 32768 minimum: 301
  101. [ 0.000935] LSM: Security Framework initializing
  102. [ 0.000998] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  103. [ 0.001016] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  104. [ 0.023002] ASID allocator initialised with 32768 entries
  105. [ 0.030996] rcu: Hierarchical SRCU implementation.
  106. [ 0.041882] EFI services will not be available.
  107. [ 0.047027] smp: Bringing up secondary CPUs ...
  108. [ 0.080354] Detected VIPT I-cache on CPU1
  109. [ 0.080389] GICv3: CPU1: found redistributor 100 region 0:0x0000000017a80000
  110. [ 0.080441] CPU1: Booted secondary processor 0x0000000100 [0x517f803c]
  111. [ 0.112327] Detected VIPT I-cache on CPU2
  112. [ 0.112354] GICv3: CPU2: found redistributor 200 region 0:0x0000000017aa0000
  113. [ 0.112399] CPU2: Booted secondary processor 0x0000000200 [0x517f803c]
  114. [ 0.144523] Detected VIPT I-cache on CPU3
  115. [ 0.144546] GICv3: CPU3: found redistributor 300 region 0:0x0000000017ac0000
  116. [ 0.144590] CPU3: Booted secondary processor 0x0000000300 [0x517f803c]
  117. [ 0.177207] Detected VIPT I-cache on CPU4
  118. [ 0.177234] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000
  119. [ 0.177279] CPU4: Booted secondary processor 0x0000000400 [0x516f802d]
  120. [ 0.209005] Detected VIPT I-cache on CPU5
  121. [ 0.209033] GICv3: CPU5: found redistributor 500 region 0:0x0000000017b00000
  122. [ 0.209077] CPU5: Booted secondary processor 0x0000000500 [0x516f802d]
  123. [ 0.241224] Detected VIPT I-cache on CPU6
  124. [ 0.241252] GICv3: CPU6: found redistributor 600 region 0:0x0000000017b20000
  125. [ 0.241296] CPU6: Booted secondary processor 0x0000000600 [0x516f802d]
  126. [ 0.273448] Detected VIPT I-cache on CPU7
  127. [ 0.273478] GICv3: CPU7: found redistributor 700 region 0:0x0000000017b40000
  128. [ 0.273522] CPU7: Booted secondary processor 0x0000000700 [0x516f802d]
  129. [ 0.273602] smp: Brought up 1 node, 8 CPUs
  130. [ 0.273732] SMP: Total of 8 processors activated.
  131. [ 0.273741] CPU features: detected: Privileged Access Never
  132. [ 0.273748] CPU features: detected: LSE atomic instructions
  133. [ 0.273756] CPU features: detected: User Access Override
  134. [ 0.273764] CPU features: detected: 32-bit EL0 Support
  135. [ 0.273773] CPU features: detected: Common not Private translations
  136. [ 0.273782] CPU features: detected: RAS Extension Support
  137. [ 0.273790] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
  138. [ 0.273801] CPU features: detected: CRC32 instructions
  139. [ 0.291317] CPU: All CPU(s) started at EL1
  140. [ 0.291361] alternatives: patching kernel code
  141. [ 0.293660] devtmpfs: initialized
  142. [ 0.304515] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  143. [ 0.304539] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
  144. [ 0.305487] pinctrl core: initialized pinctrl subsystem
  145. [ 0.306775] DMI not present or invalid.
  146. [ 0.307059] NET: Registered protocol family 16
  147. [ 0.308041] DMA: preallocated 256 KiB pool for atomic allocations
  148. [ 0.308057] audit: initializing netlink subsys (disabled)
  149. [ 0.308188] audit: type=2000 audit(0.304:1): state=initialized audit_enabled=0 res=1
  150. [ 0.309461] cpuidle: using governor menu
  151. [ 0.309792] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  152. [ 0.311215] Serial: AMBA PL011 UART driver
  153. [ 0.331507] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  154. [ 0.331524] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  155. [ 0.331537] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  156. [ 0.331549] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  157. [ 0.333621] cryptd: max_cpu_qlen set to 1000
  158. [ 0.337104] ACPI: Interpreter disabled.
  159. [ 0.348117] VBAT: supplied by DC12V
  160. [ 0.348290] VBAT_SOM: supplied by DC12V
  161. [ 0.348390] PCIE0_1.05V: supplied by VBAT
  162. [ 0.348421] VLDO_3V3: supplied by VBAT
  163. [ 0.348528] VDC_3V3: supplied by DC12V
  164. [ 0.348688] VDC_5V: supplied by DC12V
  165. [ 0.348784] LT9611_3V3: supplied by VDC_3V3
  166. [ 0.348946] LT9611_1V8: supplied by VDC_5V
  167. [ 0.348982] V5P0_HDMIOUT: supplied by VDC_5V
  168. [ 0.349064] vph_pwr: supplied by VBAT_SOM
  169. [ 0.349554] iommu: Default domain type: Translated
  170. [ 0.349824] vgaarb: loaded
  171. [ 0.350086] SCSI subsystem initialized
  172. [ 0.350231] libata version 3.00 loaded.
  173. [ 0.350428] usbcore: registered new interface driver usbfs
  174. [ 0.350462] usbcore: registered new interface driver hub
  175. [ 0.350561] usbcore: registered new device driver usb
  176. [ 0.351136] pps_core: LinuxPPS API ver. 1 registered
  177. [ 0.351148] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  178. [ 0.351168] PTP clock support registered
  179. [ 0.351265] EDAC MC: Ver: 3.0.0
  180. [ 0.352435] FPGA manager framework
  181. [ 0.352495] Advanced Linux Sound Architecture Driver Initialized.
  182. [ 0.353151] clocksource: Switched to clocksource arch_sys_counter
  183. [ 0.353268] VFS: Disk quotas dquot_6.6.0
  184. [ 0.353318] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  185. [ 0.353465] pnp: PnP ACPI: disabled
  186. [ 0.358150] thermal_sys: Registered thermal governor 'step_wise'
  187. [ 0.358154] thermal_sys: Registered thermal governor 'power_allocator'
  188. [ 0.360004] NET: Registered protocol family 2
  189. [ 0.360318] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
  190. [ 0.360376] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
  191. [ 0.360555] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
  192. [ 0.360928] TCP: Hash tables configured (established 32768 bind 32768)
  193. [ 0.360993] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
  194. [ 0.361076] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
  195. [ 0.361270] NET: Registered protocol family 1
  196. [ 0.361587] RPC: Registered named UNIX socket transport module.
  197. [ 0.361599] RPC: Registered udp transport module.
  198. [ 0.361610] RPC: Registered tcp transport module.
  199. [ 0.361619] RPC: Registered tcp NFSv4.1 backchannel transport module.
  200. [ 0.361634] PCI: CLS 0 bytes, default 64
  201. [ 0.361759] Unpacking initramfs...
  202. [ 0.605456] Freeing initrd memory: 5868K
  203. [ 0.606449] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  204. [ 0.606682] kvm [1]: HYP mode not available
  205. [ 0.717934] Initialise system trusted keyrings
  206. [ 0.718098] workingset: timestamp_bits=44 max_order=20 bucket_order=0
  207. [ 0.722522] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  208. [ 0.723066] NFS: Registering the id_resolver key type
  209. [ 0.723091] Key type id_resolver registered
  210. [ 0.723101] Key type id_legacy registered
  211. [ 0.723117] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  212. [ 0.723236] 9p: Installing v9fs 9p2000 file system support
  213. [ 0.739621] Key type asymmetric registered
  214. [ 0.739637] Asymmetric key parser 'x509' registered
  215. [ 0.739670] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  216. [ 0.739685] io scheduler mq-deadline registered
  217. [ 0.739694] io scheduler kyber registered
  218. [ 0.748018] EINJ: ACPI disabled.
  219. [ 0.758553] smps3: supplied by vph_pwr
  220. [ 0.758611] smps3: Setting 1352000-1352000uV
  221. [ 0.758775] smps5: supplied by vph_pwr
  222. [ 0.758807] smps5: Setting 1904000-2040000uV
  223. [ 0.758925] smps7: supplied by vph_pwr
  224. [ 0.758957] smps7: Setting 900000-1028000uV
  225. [ 0.759089] ldo1: supplied by smps7
  226. [ 0.759119] ldo1: Setting 880000-880000uV
  227. [ 0.759279] ldo5: supplied by smps7
  228. [ 0.759308] ldo5: Setting 800000-800000uV
  229. [ 0.759458] ldo12: supplied by smps5
  230. [ 0.759489] ldo12: Setting 1800000-1800000uV
  231. [ 0.759651] ldo7: supplied by smps5
  232. [ 0.759680] ldo7: Setting 1800000-1800000uV
  233. [ 0.759830] ldo13: Setting 1800000-2960000uV
  234. [ 0.759985] ldo17: supplied by smps3
  235. [ 0.760017] ldo17: Setting 1304000-1304000uV
  236. [ 0.760181] ldo20: Setting 2960000-2968000uV
  237. [ 0.760362] ldo21: Setting 2960000-2968000uV
  238. [ 0.760535] ldo24: Setting 3088000-3088000uV
  239. [ 0.760710] ldo25: Setting 3300000-3312000uV
  240. [ 0.760893] ldo26: supplied by smps3
  241. [ 0.760921] ldo26: Setting 1200000-1200000uV
  242. [ 0.761156] bob: supplied by vph_pwr
  243. [ 0.761190] bob: Setting 3312000-3600000uV
  244. [ 0.764803] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  245. [ 0.766483] SuperH (H)SCI(F) driver initialized
  246. [ 0.766982] msm_serial: driver initialized
  247. [ 0.767257] 898000.serial: ttyHS0 at MMIO 0x898000 (irq = 128, base_baud = 0) is a MSM
  248. [ 0.767439] serial serial0: tty port ttyHS0 registered
  249. [ 0.767576] a84000.serial: ttyMSM0 at MMIO 0xa84000 (irq = 129, base_baud = 0) is a MSM
  250. [ 2.012460] printk: console [ttyMSM0] enabled
  251. [ 2.018595] arm-smmu 15000000.iommu: probing hardware configuration...
  252. [ 2.025223] arm-smmu 15000000.iommu: SMMUv2 with:
  253. [ 2.030004] arm-smmu 15000000.iommu: stage 1 translation
  254. [ 2.035471] arm-smmu 15000000.iommu: non-coherent table walk
  255. [ 2.041280] arm-smmu 15000000.iommu: (IDR0.CTTW overridden by FW configuration)
  256. [ 2.048759] arm-smmu 15000000.iommu: stream matching with 76 register groups
  257. [ 2.055988] arm-smmu 15000000.iommu: 45 context banks (0 stage-2 only)
  258. [ 2.062681] arm-smmu 15000000.iommu: Supported page sizes: 0x61311000
  259. [ 2.069284] arm-smmu 15000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!