K3B Brennabbruch bei Datenprojekt

Devices
-----------------------
HL-DT-ST DVDRAM GP60NB60 RF01 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R doppelschichtig, DVD+R, DVD+RW, DVD+R doppelschichtig) [DVD-ROM, DVD-R sequenziell, Zweischichtige DVD-R sequenziell, Zweischicht-DVD-R-Sprung, DVD-RAM, DVD-RW Eingeschränktes Überschreiben, DVD-RW sequenziell, DVD+RW, DVD+R, Zweischichtige DVD+R, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Eingeschränktes Überschreiben, Sprung zwischen DVD-Schichten] [%7]

K3b::IsoImager
-----------------------
mkisofs print size result: 359050 (735334400 bytes)

System
-----------------------
K3b Version: 21.12.3
KDE Version: 5.90.0
Qt Version:  5.15.2
Kernel:      5.14.21-150400.24.88-default

Used versions
-----------------------
mkisofs: 3.2a09
cdrecord: 3.2a09

cdrecord
-----------------------
cdrecord: Insufficient 'file read' privileges. You will not be able to open all needed devices.
cdrecord: Insufficient 'file write' privileges. You will not be able to open all needed devices.
cdrecord: Insufficient 'device' privileges. You may not be able to send all needed SCSI commands, this my cause various unexplainable problems.
cdrecord: Insufficient 'network' privileges. You will not be able to do remote SCSI.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
Cdrecord-ProDVD-ProBD-Clone 3.02a09 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2016 Joerg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.9'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GP60NB60 '
Revision       : 'RF01'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: CD-R
Profile: DVD-R/DL sequential recording
Profile: DVD-R/DL layer jump recording
Profile: DVD+R/DL
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-RW sequential recording
Profile: DVD-RW restricted overwrite
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R (current)
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 618464 = 603 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data   701 MB
Total size:      805 MB (79:47.33) = 359050 sectors
Lout start:      805 MB (79:49/25) = 359050 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
Disk Is not unrestricted
Disk Is not erasable
  ATIP start of lead in:  -11933 (97:22/67)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 43
Manufacturer: Acer Media Technology, Inc.
    Capacity  Blklen/Sparesz.  Format-type  Type
      445350             2048         0x00  No Media Present or Unknown Capacity
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 799
Starting to write CD/DVD/BD at speed 24 in real SAO mode for single session.
Last chance to quit, starting real write in 3 seconds.
   2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Performing OPC...
cdrecord: Eingabe-/Ausgabefehler. send opc: scsi sendcmd: cmd timeout after 216.302 (200) s
CDB:  54 01 00 00 00 00 00 00 00 00
cmd finished after 216.302s timeout 200s
cdrecord: OPC failed.
Writing  time:  216.369s (00:03:36.369)
cdrecord: fifo had 64 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
BURN-Free was never needed.

cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/sr0 speed=24 -sao driveropts=burnfree -data -tsize=359050s -

mkisofs
-----------------------
mkisofs: Warning: Cannot add inode hints with -no-cache-inodes.
359050
mkisofs: Warning: Cannot add inode hints with -no-cache-inodes.
Setting input-charset to 'UTF-8' from locale.
Using ZBAW_P_ALL__CDE__LDE_ESE000.DOC;1 for  /zbaw_p_all_-cde_-lde_esemtan_cleansing_foam.doc (zbaw_p_all_-cde_-lde_esemtan_cleansing_foam(1).doc)
Using WHATSAPP_IMAGE_2023_03_12000.JP;1 for  /WhatsApp Image 2023-03-12 at 12.59.10.jpeg (WhatsApp Image 2023-03-12 at 12.59.09.jpeg)
  0,15% done, estimate finish Sat Oct 14 16:31:26 2023
  0,28% done, estimate finish Sat Oct 14 15:09:41 2023
  0,42% done, estimate finish Sat Oct 14 14:41:16 2023
  0,56% done, estimate finish Sat Oct 14 14:26:02 2023

mkisofs calculate size command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -print-size -quiet -volid 01_satzung_der_dpsg_-_stammesebe -volset  -appid K3B THE CD KREATOR (C) 1998-2018 SEBASTIAN TRUEG, MICHAL MALEK AND LESLIE ZHAI -publisher  -preparer  -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/k3b.UKfJQM -rational-rock -hide-list /tmp/k3b.eHCUtv -joliet -joliet-long -hide-joliet-list /tmp/k3b.eJCgWK -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/k3b.fbBXhu

mkisofs command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid 01_satzung_der_dpsg_-_stammesebe -volset  -appid K3B THE CD KREATOR (C) 1998-2018 SEBASTIAN TRUEG, MICHAL MALEK AND LESLIE ZHAI -publisher  -preparer  -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/k3b.iEwuou -rational-rock -hide-list /tmp/k3b.jWFAJv -joliet -joliet-long -hide-joliet-list /tmp/k3b.YwPcAr -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/k3b.EoZApY