Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@OpenWrt:/tmp#
- root@OpenWrt:/tmp#
- root@OpenWrt:/tmp# mtd write /tmp/psbl_4M_16M_AMD_AR7WRD.bin loader
- Could not open mtd device: loader
- Can't open device for writing!
- root@OpenWrt:/tmp#
- root@OpenWrt:/tmp# mtd write /tmp/openwrt-WA22-squashfs-code.bin linux
- Unlocking linux ...
- Writing from /tmp/openwrt-WA22-squashfs-code.bin to linux ...
- root@OpenWrt:/tmp# reboot
- root@OpenWrt:/tmp# CPU 0 Unable to handle kernel paging request at virtual address c0072be7, epc == 9422c8ac, ra == 9422c838
- Oops[#1]:
- Cpu 0
- $ 0 : 00000000 10008400 c0072be7 fffe1826
- $ 4 : 00020000 00001826 fffe0000 c005138d
- $ 8 : 000200d2 ffffffff 9438bc78 00000000
- $12 : 00000000 00000001 00100100 00200200
- $16 : 00000004 00000000 054c1825 0000140d
- $20 : c0b31644 0000000a 945ffa8c c0073000
- $24 : 00000018 9415f674
- $28 : 945fe000 945ffa60 054c1826 9422c838
- Hi : 00000000
- Lo : 148d3bb0
- epc : 9422c8ac 0x9422c8ac
- Not tainted
- ra : 9422c838 0x9422c838
- Status: 10008403 KERNEL EXL IE
- Cause : 10800008
- BadVA : c0072be7
- PrId : 00018448 (MIPS 4KEc)
- Modules linked in: tiatm acx nf_nat_tftp nf_conntrack_tftp nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack pppoe pppox pppoatm ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables ppp_async ppp_generic slhc br2684 atm crc_ccitt
- Process ifdown (pid: 962, threadinfo=945fe000, task=94f1d5b0, tls=00000000)
- Stack : 00000029 94106a30 00000002 942215f0 00000004 00000034 0000001a 0200006d
- 01f3dc00 00000000 94d16900 9422b7f4 c005138e c0051000 c005aef7 00009ef7
- 01051f0c 148d3bb0 148d3bb0 94863a00 00c76a24 0c896ae0 0000f52e 00000000
- c0051000 c0b31000 00000003 00000003 00000001 c0b31644 c0b31a68 c0b31664
- 00000007 00000002 945ffa78 945ffa74 943c0000 94c230a4 00000000 00000000
- ...
- Call Trace:[<94106a30>] 0x94106a30
- [<942215f0>] 0x942215f0
- [<9422b7f4>] 0x9422b7f4
- [<941f1224>] 0x941f1224
- [<941f1048>] 0x941f1048
- [<941ed354>] 0x941ed354
- [<94139dcc>] 0x94139dcc
- [<941edd38>] 0x941edd38
- [<941640f0>] 0x941640f0
- [<941eed30>] 0x941eed30
- [<9415c758>] 0x9415c758
- [<941671c4>] 0x941671c4
- [<94167254>] 0x94167254
- [<94167898>] 0x94167898
- [<9415e8e4>] 0x9415e8e4
- [<94163a80>] 0x94163a80
- [<94190a8c>] 0x94190a8c
- [<94192a7c>] 0x94192a7c
- [<941640f0>] 0x941640f0
- [<94139dcc>] 0x94139dcc
- [<9417f788>] 0x9417f788
- [<9417f7ec>] 0x9417f7ec
- [<9417f948>] 0x9417f948
- [<941f4fbc>] 0x941f4fbc
- [<94193728>] 0x94193728
- [<94199b68>] 0x94199b68
- [<9419a1ec>] 0x9419a1ec
- [<9419d88c>] 0x9419d88c
- [<9410e6b8>] 0x9410e6b8
- [<94101e10>] 0x94101e10
- [<941903bc>] 0x941903bc
- Code: 1440fffb 02651023 02e21021 <90520000> 02f31821 a0720000 0908b246 26730001 027e1823
- Disabling lock debugging due to kernel taint
- ▒▒▒▒▒+▒▒D▒▒▒2B▒▒,%X▒덨S"Fʈ▒▒DP▒b)H&▒Q,`\▒Y▒▒f▒▒▒"▒▒▒!I@▒b ▒@F8▒▒ H▒"@D▒}- 91▒0
- ▒▒#▒a@: ▒@
- 0T@!▒Q @▒P▒@▒@@▒▒@
- ▒▒b
- 0 ▒*L▒▒t@ E ▒
- @▒
- ADAM2 Revision 0.22.13
- (C) Copyright 1996-2003 Texas Instruments Inc. All Rights Reserved.
- (C) Copyright 2003 Telogy Networks, Inc.
- Usage: setmfreq [-d] [-s sys_freq, in MHz] [cpu_freq, in MHz]
- Memory optimization Complete!
- mac_init(): Find mac [00:13:10:F3:9A:B0] in location 0
- Find mac [00:13:10:F3:9A:B0] in location 0
- mac_value:00:13:10:F3:9A:B0
- tftpserver initialized
- Adam2_AR7WRD >
- Press any key to abort OS load, or wait 5 seconds for OS to boot...
- File for wrong Endian!
- File for wrong E
- File: Command not Found!
- Adam2_AR7WRD >
- ADAM2 Revision 0.22.13
- (C) Copyright 1996-2003 Texas Instruments Inc. All Rights Reserved.
- (C) Copyright 2003 Telogy Networks, Inc.
- Usage: setmfreq [-d] [-s sys_freq, in MHz] [cpu_freq, in MHz]
- Memory optimization Complete!
- mac_init(): Find mac [00:13:10:F3:9A:B0] in location 0
- Find mac [00:13:10:F3:9A:B0] in location 0
- mac_value:00:13:10:F3:9A:B0
- tftpserver initialized
- Adam2_AR7WRD >
- Press any key to abort OS load, or wait 5 seconds for OS to boot...
- Adam2_AR7WRD > password: admin
- filename: openwrt-wa22-squashfs-code.bin
- start : 0x90020000,0x903f0000
- start: 0x90020000,0x903f0000 end: 0x903f0000
- flashAddress = b0020000
- endAddress = b03f0000
- tftp_ramAddress = 94400000
- Code Pattern Correct!
- Erasing from 0xb0020000 to 0xb03f0000.
- FlashEraseBlock(b0020000,b03effff);
- .............................................................
- Erase Successful.
- ...........................................▒
- ADAM2 Revision 0.22.13
- (C) Copyright 1996-2003 Texas Instruments Inc. All Rights Reserved.
- (C) Copyright 2003 Telogy Networks, Inc.
- Usage: setmfreq [-d] [-s sys_freq, in MHz] [cpu_freq, in MHz]
- Memory optimization Complete!
- mac_init(): Find mac [00:13:10:F3:9A:B0] in location 0
- Find mac [00:13:10:F3:9A:B0] in location 0
- mac_value:00:13:10:F3:9A:B0
- tftpserver initialized
- Adam2_AR7WRD >
- Press any key to abort OS load, or wait 5 seconds for OS to boot...
- Linux version 2.6.32.27 (jow@nd-build-02.linux-appliance.net) (gcc version 4.3.3 (GCC) ) #5 Wed Dec 21 01:54:33 CET 2011
- bootconsole [early0] enabled
- CPU revision is: 00018448 (MIPS 4KEc)
- TI AR7 (TNETD7300), ID: 0x0005, Revision: 0x02
- Determined physical RAM map:
- memory: 01000000 @ 14000000 (usable)
- Initrd not found or empty - disabling initrd
- Zone PFN ranges:
- Normal 0x00014000 -> 0x00015000
- Movable zone start PFN for each node
- early_node_map[1] active PFN ranges
- 0: 0x00014000 -> 0x00015000
- Built 1 zonelists in Zone order, mobility grouping off. Total pages: 4064
- Kernel command line: rootfstype=squashfs,jffs2 console=ttyS0,38400n8
- PID hash table entries: 64 (order: -4, 256 bytes)
- Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
- Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
- Primary instruction cache 16kB, VIPT, 4-way, linesize 16 bytes.
- Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 16 bytes
- Memory: 12352k/16384k available (2255k kernel code, 4032k reserved, 353k data, 136k init, 0k highmem)
- Hierarchical RCU implementation.
- NR_IRQS:256
- Calibrating delay loop... 149.50 BogoMIPS (lpj=747520)
- Mount-cache hash table entries: 512
- NET: Registered protocol family 16
- bio: create slab <bio-0> at 0
- Switching to clocksource MIPS
- NET: Registered protocol family 2
- IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- TCP established hash table entries: 512 (order: 0, 4096 bytes)
- TCP bind hash table entries: 512 (order: -1, 2048 bytes)
- TCP: Hash tables configured (established 512 bind 512)
- TCP reno registered
- NET: Registered protocol family 1
- squashfs: version 4.0 (2009/01/31) Phillip Lougher
- Registering mini_fo version $Id$
- JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
- msgmni has been set to 24
- io scheduler noop registered
- io scheduler deadline registered (default)
- Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- serial8250: ttyS0 at MMIO 0x8610e00 (irq = 15) is a TI-AR7
- console [ttyS0] enabled, bootconsole disabled
- console [ttyS0] enabled, bootconsole disabled
- serial8250: ttyS1 at MMIO 0x8610f00 (irq = 16) is a TI-AR7
- physmap platform flash device: 00800000 at 10000000
- physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
- CFI mfr 0x00000001
- CFI id 0x000022f6
- Amd/Fujitsu Extended Query Table at 0x0040
- Amd/Fujitsu Extended Query version 1.1.
- physmap-flash.0: Swapping erase regions for broken CFI table.
- number of CFI chips: 1
- cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
- cmdlinepart partition parsing not available
- RedBoot partition parsing not available
- 4 ar7part partitions found on MTD device physmap-flash.0
- Creating 4 MTD partitions on "physmap-flash.0":
- 0x000000000000-0x000000010000 : "loader"
- 0x0000003f0000-0x000000400000 : "config"
- 0x000000020000-0x0000003f0000 : "linux"
- 0x000000100000-0x0000003f0000 : "rootfs"
- mtd: partition "rootfs" set to be root filesystem
- mtd: partition "rootfs_data" created automatically, ofs=2C0000, len=130000
- 0x0000002c0000-0x0000003f0000 : "rootfs_data"
- Fixed MDIO Bus: probed
- cpmac-mii: probed
- cpmac cpmac.1: no PHY present, falling back to switch mode
- cpmac: device eth0 (regs: 08612800, irq: 41, phy: 0:01, mac: 00:13:10:f3:00:00)
- cpmac: device eth1 (regs: 08610000, irq: 27, phy: 1:1f, mac: 00:13:10:f3:00:00)
- Registered led device: status
- vlynq0: regs 0x08611800, irq 29, mem 0x04000000
- Found a VLYNQ device: 00000009
- vlynq1: regs 0x08611c00, irq 33, mem 0x0c000000
- TCP westwood registered
- NET: Registered protocol family 17
- 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
- All bugs added by David S. Miller <davem@redhat.com>
- VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
- Freeing unused kernel memory: 136k freed
- Please be patient, while OpenWrt loads ...
- - preinit -
- Press the [f] key and hit [enter] to enter failsafe mode
- - regular preinit -
- jffs2 not ready yet; using ramdisk
- mini_fo: using base directory: /
- mini_fo: using storage directory: /tmp/root
- - init -
- Please press Enter to activate this console. device eth0 entered promiscuous mode
- br-lan: port 1(eth0) entering forwarding state
- PHY: 0:01 - Link is Up - 100/Full
- device eth1 entered promiscuous mode
- NET: Registered protocol family 8
- NET: Registered protocol family 20
- PPP generic driver version 2.4.2
- ip_tables: (C) 2000-2006 Netfilter Core Team
- NET: Registered protocol family 24
- nf_conntrack version 0.5.0 (195 buckets, 780 max)
- CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
- nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
- sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
- acx: this driver is still EXPERIMENTAL
- acx: reading README file and/or Craig's HOWTO is recommended, visit http://acx100.sf.net in case of further questions/discussion
- acx: compiled to use 32bit I/O access. I/O timing issues might occur, such as non-working firmware upload. Report them
- acx: running on a little-endian CPU
- acx: PCI/VLYNQ module v0.3.37 initialized, waiting for cards to probe...
- Driver found for VLYNQ device: 00000009
- acx: found TI TNETW1130-based wireless network card at <NULL>, irq:80, phymem:0x4000000, mem:0xa4000000
- initial debug setting is 0x000A
- using IRQ 80
- acx: need to load firmware for acx111 chipset with radio ID 16, please provide via firmware hotplug:
- acx: either one file only (<c>ombined firmware image file, radio-specific) or two files (radio-less base image file *plus* separate <r>adio-specific extension file)
- requesting firmware image 'tiacx111c16'
- acx_vlynq vlynq0: firmware: requesting tiacx111c16
- acx_write_fw (main/combined): 0
- acx_validate_fw (main/combined): 0
- initializing max packet templates
- dump queue head (from card):
- len: 24
- tx_memory_block_address: 19E40
- rx_memory_block_address: 15240
- tx1_queue address: 14774
- rx1_queue address: 14434
- NVS_vendor_offs:0221 probe_delay:200 eof_memory:1114112
- CCAModes:04 Diversity:01 ShortPreOpt:01 PBCC:01 ChanAgil:00 PHY:05 Temp:01
- AntennaID:00 Len:02 Data:01 02
- PowerLevelID:01 Len:02 Data:001E 000A
- DataRatesID:02 Len:05 Data:02 04 11 22 44
- DomainID:03 Len:06 Data:41 20 30 31 32 40
- ProductID:04 Len:09 Data:TI ACX100
- ManufacturerID:05 Len:07 Data:TI Test
- get_mask 0x00004182, set_mask 0x00000000
- don't know how to get sensitivity for radio type 0x16
- got sensitivity value 0
- got antenna value 0x4A
- got regulatory domain 0x41
- get_mask 0x00000000, set_mask 0x00000000 - after update
- new ratevector: 82 84 0B 0C 12 16 18 24 2C 30 48 60 6C
- setting RXconfig to 2010:0FDD
- acx: === chipset TNETW1130, radio type 0x16 (Radia), form factor 0x01 ((mini-)PCI / CardBus), EEPROM version 0x05: uploaded firmware 'Rev 2.3.1.31' ===
- creating /proc entry driver/acx_wlan%d
- creating /proc entry driver/acx_wlan%d_diag
- creating /proc entry driver/acx_wlan%d_eeprom
- creating /proc entry driver/acx_wlan%d_phy
- acx v0.3.37: net device wlan%d, driver compiled against wireless extensions 22 and Linux 2.6.32.27
- using IRQ 80
- registered device TI Avalanche SAR
- Sangam detected
- requesting firmware image "ar0700xx.bin"
- avsar: firmware: requesting ar0700xx.bin
- tn7dsl_set_modulation : Setting mode to 0x1
- Creating new root folder avalanche in the proc for the driver stats
- Texas Instruments ATM driver: version:[7.03.01.00]
- jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
- jffs2_build_filesystem(): unlocking the mtd device... done.
- jffs2_build_filesystem(): erasing all blocks after the end marker... done.
- mini_fo: using base directory: /
- mini_fo: using storage directory: /overlay
- ADAM2 Revision 0.22.13
- (C) Copyright 1996-2003 Texas Instruments Inc. All Rights Reserved.
- (C) Copyright 2003 Telogy Networks, Inc.
- Usage: setmfreq [-d] [-s sys_freq, in MHz] [cpu_freq, in MHz]
- Memory optimization Complete!
- mac_init(): Find mac [00:13:10:F3:9A:B0] in location 0
- Find mac [00:13:10:F3:9A:B0] in location 0
- mac_value:00:13:10:F3:9A:B0
- tftpserver initialized
- Adam2_AR7WRD >
- Press any key to abort OS load, or wait 5 seconds for OS to boot...
- Adam2_AR7WRD > password: admin
- filename: 1.02.02-skidoo.bin
- Invalid filename
- password: admin
- filename: 1.02.02-skidoo.bin
- Invalid filename
- password: admin
- filename: 1.02.02-skidoo.bin
- Invalid filename
- password: admin
- filename: 1.02.02-skidoo.bin
- Invalid filename
- Adam2_AR7WRD > password: admin
- filename: openwrt-wa22-squashfs-code.bin
- start : 0x90020000,0x903f0000
- start: 0x90020000,0x903f0000 end: 0x903f0000
- flashAddress = b0020000
- endAddress = b03f0000
- tftp_ramAddress = 94400000
- Code Pattern should be:WA22 , but Upgrade Code Pattern is:WA21!!!
- password: admin
- filename: openwrt-wa22-squashfs-code.bin
- start : 0x90020000,0x903f0000
- start: 0x90020000,0x903f0000 end: 0x903f0000
- flashAddress = b0020000
- endAddress = b03f0000
- tftp_ramAddress = 94400000
- Code Pattern should be:WA22 , but Upgrade Code Pattern is:WA21!!!
- password: admin
- filename: openwrt-wa22-squashfs-code.bin
- start : 0x90020000,0x903f0000
- start: 0x90020000,0x903f0000 end: 0x903f0000
- flashAddress = b0020000
- endAddress = b03f0000
- tftp_ramAddress = 94400000
- Code Pattern should be:WA22 , but Upgrade Code Pattern is:WA21!!!
- password: admin
- filename: openwrt-wa22-squashfs-code.bin
- start : 0x90020000,0x903f0000
- start: 0x90020000,0x903f0000 end: 0x903f0000
- flashAddress = b0020000
- endAddress = b03f0000
- tftp_ramAddress = 94400000
- Code Pattern should be:WA22 , but Upgrade Code Pattern is:WA21!!!
- password: admin
- filename: openwrt-wa22-squashfs-code.bin
- start : 0x90020000,0x903f0000
- start: 0x90020000,0x903f0000 end: 0x903f0000
- flashAddress = b0020000
- endAddress = b03f0000
- tftp_ramAddress = 94400000
- Code Pattern should be:WA22 , but Upgrade Code Pattern is:WA21!!!
- password: admin
- filename: openwrt-wa22-squashfs-code.bin
- start : 0x90020000,0x903f0000
- start: 0x90020000,0x903f0000 end: 0x903f0000
- flashAddress = b0020000
- endAddress = b03f0000
- tftp_ramAddress = 94400000
- Code Pattern should be:WA22 , but Upgrade Code Pattern is:WA21!!!
- password: admin
- filename: openwrt-wa22-squashfs-code.bin
- start : 0x90020000,0x903f0000
- start: 0x90020000,0x903f0000 end: 0x903f0000
- flashAddress = b0020000
- endAddress = b03f0000
- tftp_ramAddress = 94400000
- Code Pattern should be:WA22 , but Upgrade Code Pattern is:WA21!!!
- password: admin
- filename: openwrt-wa22-squashfs-code.bin
- start : 0x90020000,0x903f0000
- start: 0x90020000,0x903f0000 end: 0x903f0000
- flashAddress = b0020000
- endAddress = b03f0000
- tftp_ramAddress = 94400000
- Code Pattern should be:WA22 , but Upgrade Code Pattern is:WA21!!!
- Char ''(03) Ignored!
- Adam2_AR7WRD > password: admin
- filename: openwrt-wa22-squashfs-code.bin
- start : 0x90020000,0x903f0000
- start: 0x90020000,0x903f0000 end: 0x903f0000
- flashAddress = b0020000
- endAddress = b03f0000
- tftp_ramAddress = 94400000
- Code Pattern Correct!
- Erasing from 0xb0020000 to 0xb03f0000.
- FlashEraseBlock(b0020000,b03effff);
- .............................................................
- Erase Successful.
- ............................................................
- ADAM2 Revision 0.22.13
- (C) Copyright 1996-2003 Texas Instruments Inc. All Rights Reserved.
- (C) Copyright 2003 Telogy Networks, Inc.
- Usage: setmfreq [-d] [-s sys_freq, in MHz] [cpu_freq, in MHz]
- Memory optimization Complete!
- mac_init(): Find mac [00:13:10:F3:9A:B0] in location 0
- Find mac [00:13:10:F3:9A:B0] in location 0
- mac_value:00:13:10:F3:9A:B0
- tftpserver initialized
- Adam2_AR7WRD >
- Press any key to abort OS load, or wait 5 seconds for OS to boot...
- Launching kernel decompressor.
- Starting LZMA Uncompression Algorithm.
- Copyright (C) 2003 Texas Instruments Incorporated; Copyright (C) 1999-2003 Igor Pavlov.
- Compressed file is LZMA format.
- Kernel decompressor was successful ... launching kernel.
- LINUX started...
- Config serial console: ttyS0,38400
- CPU revision is: 00018448
- Primary instruction cache 16kb, linesize 16 bytes (4 ways)
- Primary data cache 16kb, linesize 16 bytes (4 ways)
- Number of TLB entries 16.
- Linux version 2.4.17_mvl21-malta-mips_fp_le (nico@nico-linux) (gcc version 2.95.3 20010315 (release/MontaVista)) #47 mer sep 27 06:50:53 CEST 2006
- Determined physical RAM map:
- memory: 14000000 @ 00000000 (reserved)
- memory: 00020000 @ 14000000 (ROM data)
- memory: 00fe0000 @ 14020000 (usable)
- On node 0 totalpages: 4096
- zone(0): 4096 pages.
- zone(1): 0 pages.
- zone(2): 0 pages.
- .........boot_code Adam2...........
- ..00....90....1a....3c....80....0b....5a....27....08....00..
- base address: 00000000
- env size: 1431655765
- ptr: a0000000
- Kernel command line:
- calculating r4koff... 000b71b0(750000)
- CPU frequency 150.00 MHz
- Calibrating delay loop... 149.91 BogoMIPS
- Freeing Adam2 reserved memory [0x14001000,0x0001f000]
- Memory: 13892k/16384k available (1879k kernel code, 2492k reserved, 139k data, 64k init)
- Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
- Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
- Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
- Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
- Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
- Checking for 'wait' instruction... unavailable.
- POSIX conformance testing by UNIFIX
- Linux NET4.0 for Linux 2.4
- Based upon Swansea University Computer Society NET3.039
- TI Optimizations: Allocating TI-Cached Memory Pool.
- Warning: Number of buffers is not configured.Setting default to 512
- Using 512 Buffers for TI-Cached Memory Pool.
- DEBUG: Using Hybrid Mode.
- NSP Optimizations: Succesfully allocated TI-Cached Memory Pool.
- Initializing RT netlink socket
- Starting kswapd
- Disabling the Out Of Memory Killer
- devfs: v1.7 (20011216) Richard Gooch (rgooch@atnf.csiro.au)
- devfs: boot_options: 0x1
- pty: 32 Unix98 ptys configured
- Serial driver version 5.05c (2001-07-08) with no serial options enabled
- ttyS00 at 0xa8610e00 (irq = 15) is a 16550A
- ttyS01 at 0xa8610f00 (irq = 16) is a 16550A
- Vlynq CONFIG_MIPS_AVALANCHE_VLYNQ_PORTS=2
- Vlynq Device vlynq0 registered with minor no 63 as misc device. Result=0
- Vlynq instance:0 Link UP
- Vlynq Device vlynq1 registered with minor no 62 as misc device. Result=0
- VLYNQ 1 : init failed
- block: 64 slots per queue, batch=16
- Using the MAC with external PHY
- Cpmac driver is allocating buffer memory at init time.
- Cpmac driver Disable TX complete interrupt setting threshold to 20.
- Default Asymmetric MTU for eth0 1500
- PPP generic driver version 2.4.1
- avalanche flash device: 0x400000 at 0x10000000.
- Amd/Fujitsu Extended Query Table v1.1 at 0x0040
- Physically mapped flash: Swapping erase regions for broken CFI table.
- number of CFI chips: 1
- Looking for mtd device :mtd0:
- Found a mtd0 image (0xe0000), with size (0x310000).
- Looking for mtd device :mtd1:
- Found a mtd1 image (0x20000), with size (0xc0000).
- Looking for mtd device :mtd2:
- Found a mtd2 image (0x0), with size (0x20000).
- Looking for mtd device :mtd3:
- Found a mtd3 image (0x3f0000), with size (0x10000).
- Looking for mtd device :mtd4:
- Found a mtd4 image (0x20000), with size (0x3d0000).
- Creating 5 MTD partitions on "Physically mapped flash":
- 0x000e0000-0x003f0000 : "mtd0"
- 0x00020000-0x000e0000 : "mtd1"
- 0x00000000-0x00020000 : "mtd2"
- 0x003f0000-0x00400000 : "mtd3"
- 0x00020000-0x003f0000 : "mtd4"
- NET4: Linux TCP/IP 1.0 for NET4.0
- IP Protocols: ICMP, UDP, TCP, IGMP
- IP: routing cache hash table of 512 buckets, 4Kbytes
- TCP: Hash tables configured (established 1024 bind 1024)
- IPv4 over IPv4 tunneling driver
- Default Asymmetric MTU for tunl0 1480
- GRE over IPv4 tunneling driver
- Default Asymmetric MTU for gre0 1476
- Linux IP multicast router 0.06 plus PIM-SM
- klips_info:ipsec_init: KLIPS startup, FreeS/WAN IPSec version: super-freeswan-1.99.8
- Default Asymmetric MTU for ipsec0 0
- Default Asymmetric MTU for ipsec1 0
- Default Asymmetric MTU for ipsec2 0
- Default Asymmetric MTU for ipsec3 0
- Default Asymmetric MTU for ipsec4 0
- klips_info:ipsec_alg_init: KLIPS alg v=0.8.1-0 (EALG_MAX=255, AALG_MAX=15)
- klips_info:ipsec_alg_init: calling ipsec_alg_static_init()
- ipsec_1des_init(alg_type=15 alg_id=2 name=1des): ret=0
- You should NOT load 1DES support except for testing purposes !
- ipsec_null_init(alg_type=15 alg_id=11 name=null): ret=0
- ip_conntrack version 2.0 (128 buckets, 1024 max) - 392 bytes per conntrack
- ip_tables: (c)2000 Netfilter core team
- netfilter PSD loaded - (c) astaro AG
- NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
- NET4: Ethernet Bridge 008 for NET4.0
- Initializing the WAN Bridge.
- Please set the MAC Address for the WAN Bridge.
- Set the Environment variable 'wan_br_mac'.
- MAC Address should be in the following format: xx.xx.xx.xx.xx.xx
- 802.1Q VLAN Support v1.6 Ben Greear <greearb@candelatech.com>
- vlan Initialization complete.
- VFS: Mounted root (squashfs filesystem) readonly.
- Mounted devfs on /dev
- Freeing unused kernel memory: 64k freed
- Firmware Version: v1.02.02-Skidoo
- Hit enter to continue...killall: httpd: no process killed
- Configured 19 states
- now insmod tiatm
- Warning: loading tiatm will taint the kernel: no license
- See http://www.tux.org/lkml/#export-tainted for information about tainted modules
- name=[eth0] lan_ifname=[br0]
- =====> set br0 hwaddr to eth0
- =====> set br0 hwaddr to eth0
- wlconf: No such file or directory
- Lan Ipaddr: 255.255.255.0 Netmask: 255.255.255.0................
- 255.255.255.0 255.255.255.0
- mixed mode
- insmod ap driver
- Warning: loading tiap will taint the kernel: no license
- See http://www.tux.org/lkml/#export-tainted for information about tainted modules
- ret = 0
- .............list ..............
- The boot is UNKNOWN
- tftp server started
- tftpd: standalone socket
- HTTPD start, port 80
- dhcpd:auto_search_ip=0,firstsetlanip=1
- .............list ..............
- info, udhcp server (v0.9.8) started
- done
- Now Start syslog.........................!!zebra disabled
- killall: adslpolling: no process killed
- IDLE
- Hit enter to continue...wan def hwaddr 00:13:10:F3:9A:B1
- polling now .......
- upnpd-igd:current select wan connection:0
- upnp_content_num_0 = 14
- killall: begin_now: no process killed
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- BusyBox v1.2.0 (2006.09.26-10:20+0000) Built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- / #
- / # help
- Built-in commands:
- -------------------
- . : [ [[ alias bg break cd chdir continue echo eval exec exit
- export false fg hash help jobs kill let local pwd read readonly
- return set shift source test times trap true type ulimit umask
- unalias unset wait
- / # send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- / # passwd root
- /bin/sh: passwd: not found
- / # passend error
- ssend error
- /bin/sh: pass: not found
- / # help
- Built-in commands:
- -------------------
- . : [ [[ alias bg break cd chdir continue echo eval exec exit
- export false fg hash help jobs kill let local pwd read readonly
- return set shift source test times trap true type ulimit umask
- unalias unset wait
- / # passwd
- /bin/sh: passwd: not found
- / #
- / # send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- IGMPProxy filter monitor_ps sync
- [ filtersync more syslogd
- [[ free msh tail
- ash gpio mv tc
- atmarp grep netstat telnetd
- atmarpd halt nslookup test
- brctl hb_connect ntpclient tftp
- busybox hb_disconnect ntpd tftpd
- cat hotplug nvram top
- chgrp httpd ping touch
- chmod ifconfig pivot_root traceroute
- chown init poweroff true
- cp insmod pppd udhcpc
- cron ip ps udhcpd
- date ipsec/ pwd uname
- ddns_success iptables rc upgrade_firmware
- df iptables-restore reboot upnpd-igd
- dhcrelay ipupdated redial uptime
- diagnostic kill resetbutton vconfig
- diagtool killall restore vi
- dnsmasq klogd ripd watch
- dumpleases listen rm wget
- echo ln rmdir who
- egrep login rmmod whoami
- email_alert ls route wlcfg
- erase lsmod sh wpa_authenticator
- ez-ipupdate mesg sleep write
- false mkdir snmpd zebra
- fgrep modprobe stats
- / #
- / # send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- cat /proc/mtd
- dev: size erasesize name
- mtd0: 00310000 00010000 "mtd0"
- mtd1: 000c0000 00010000 "mtd1"
- mtd2: 00020000 00010000 "mtd2"
- mtd3: 00010000 00002000 "mtd3"
- mtd4: 003d0000 00010000 "mtd4"
- / # send error
- send error
- / # send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- tftp -g -l /tmp/bootbla.bin -r psblablalbalblasend error68.1.80
- send error
- .bin 192.168.1.80
- tftp: server says: File not found
- / # send error
- send error
- send error
- send error
- send error
- send error
- tftp -g -l /tmp/loader.bin -r psbl_4M_16M_AMD_AR7WRD.bin 192.168.1.80
- / # cd temp
- /bin/sh: cd: can't cd to temp
- / # cd/send error
- send error
- cd /temp
- /bin/sh: cd/cd: not found
- / # cd /temp
- /bin/sh: cd: can't cd to /temp
- / # ls
- bin dev etc lib mnt proc sbin tmp usr var www
- / # cd ..
- / # cd ..
- / # ls
- bin dev etc lib mnt proc sbin tmp usr var www
- / # send error
- send error
- /cd /tmp
- /bin/sh: /cd: not found
- / # send error
- send error
- / #
- / # help
- Built-in commands:
- -------------------
- . : [ [[ alias bg break cd chdir continue echo eval exec exit
- export false fg hash help jobs kill let local pwd read readonly
- return set shift source test times trap true type ulimit umask
- unalias unset wait
- / #
- / #
- / #
- IGMPProxy filter monitor_ps sync
- [ filtersync more syslogd
- [[ free msh tail
- ash gpio mv tc
- atmarp grep netstat telnetd
- atmarpd halt nslookup test
- brctl hb_connect ntpclient tftp
- busybox hb_disconnect ntpd tftpd
- cat hotplug nvram top
- chgrp httpd ping touch
- chmod ifconfig pivot_root traceroute
- chown init poweroff true
- cp insmod pppd udhcpc
- cron ip ps udhcpd
- date ipsec/ pwd uname
- ddns_success iptables rc upgrade_firmware
- df iptables-restore reboot upnpd-igd
- dhcrelay ipupdated redial uptime
- diagnostic kill resetbutton vconfig
- diagtool killall restore vi
- dnsmasq klogd ripd watch
- dumpleases listen rm wget
- echo ln rmdir who
- egrep login rmmod whoami
- email_alert ls route wlcfg
- erase lsmod sh wpa_authenticator
- ez-ipupdate mesg sleep write
- false mkdir snmpd zebra
- fgrep modprobe stats
- / # send error
- send error
- / # send error
- send error
- / # cd /tsend error
- send error
- mp
- /tmp # ls
- action hosts resolv.conf udhcpd.leases
- adslpolling igd status var
- cron.d loader.bin udhcpd.conf
- /tmp # send error
- send error
- send error
- send error
- /tmp # ls -a
- . adslpolling igd status var
- .. cron.d loader.bin udhcpd.conf
- action hosts resolv.conf udhcpd.leases
- /tmp # send error
- send error
- ls ?
- ls: ?: No such file or directory
- /tmp # ls /?
- ls: /?: No such file or directory
- /tmp # ls help
- ls: help: No such file or directory
- /tmp # send error
- send error
- help
- Built-in commands:
- -------------------
- . : [ [[ alias bg break cd chdir continue echo eval exec exit
- export false fg hash help jobs kill let local pwd read readonly
- return set shift source test times trap true type ulimit umask
- unalias unset wait
- /tmp # ls -la
- drwxr-xr-x 1 0 0 0 Sep 8 2002 .
- drwxr-xr-x 1 1000 1000 72 Sep 26 2006 ..
- -r-S--Sr-T 1 0 0 8 Jan 1 00:00 action
- lrwxrwxrwx 1 0 0 8 Jan 1 00:00 adslpolling -> /sbin/rc
- drwx------ 1 0 0 0 Jan 1 00:00 cron.d
- -rw-r--r-- 1 0 0 0 Jan 1 00:00 hosts
- drwxr-xr-x 1 1000 1000 0 Apr 29 2006 igd
- -rw-r--r-- 1 0 0 64336 Jan 1 00:23 loader.bin
- -rw-r--r-- 1 0 0 0 Jan 1 00:00 resolv.conf
- drwxr-xr-x 1 0 0 0 Jan 1 00:00 status
- -rw-r--r-- 1 0 0 334 Jan 1 00:00 udhcpd.conf
- -rw-r--r-- 1 0 0 176 Jan 1 00:26 udhcpd.leases
- drwxr-xr-x 1 0 0 0 Sep 8 2002 var
- /tmp # send error
- send error
- send error
- send error
- cat loader.bin > /dev/mtdblock3send error
- send error
- /bin/sh: cannot create /dev/mtdblock3: Permission denied
- /tmp # send error
- send error
- send error
- send error
- cat loader.bin > /dev/mtd3
- /bin/sh: cannot create /dev/mtd3: Permission denied
- /tmp # send error
- send error
- cat loader.bin > /dev/mtd3send error
- send error
- mtd
- /bin/sh: cannot create /dev/mtd3mtd: Permission denied
- /tmp # send error
- send error
- send error
- send error
- send error
- send error
- cd /dev
- /dev # ls
- console misc ppp smtp_server_dev
- cua mtd ptmx ticfg
- full mtdblock pts tts
- kmem netlink pty tty
- led null random urandom
- log nvram root zero
- mem port shm
- /dev # cd mtd
- /dev/mtd # ls
- 0 0ro 1 1ro 2 2ro 3 3ro 4 4ro
- /dev/mtd #
- /dev/mtd # send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- cat loader.bin > /dev/mtdblock/3
- cat: loader.bin: No such file or directory
- /dev/mtd # cd /tmp
- /tmp # cat loader.bin > /dev/mtdblock/3send error
- send error
- /tmp # send error
- send error
- send error
- send error
- cat loader.bin > /dev/mtdblock/3
- /tmp # send error
- send error
- cat loader.bin > /dev/mtdblock/3
- /tmp # send error
- send error
- x▒▒"▒3N▒f
- ▒1▒H
- ADAM2 Revision 0.22.13
- (C) Copyright 1996-2003 Texas Instruments Inc. All Rights Reserved.
- (C) Copyright 2003 Telogy Networks, Inc.
- Usage: setmfreq [-d] [-s sys_freq, in MHz] [cpu_freq, in MHz]
- Memory optimization Complete!
- mac_init(): Find mac [00:13:10:F3:9A:B0] in location 0
- Find mac [00:13:10:F3:9A:B0] in location 0
- Update lan mac from [00:e0:a0:a6:66:70] to [00:13:10:F3:9A:B0]
- mac_value:00:13:10:F3:9A:B0
- tftpserver initialized
- Adam2_AR7WRD >
- Press any key to abort OS load, or wait 5 seconds for OS to boot...
- Launching kernel decompressor.
- Starting LZMA Uncompression Algorithm.
- Copyright (C) 2003 Texas Instruments Incorporated; Copyright (C) 1999-2003 Igor Pavlov.
- Compressed file is LZMA format.
- Kernel decompressor was successful ... launching kernel.
- LINUX started...
- Config serial console: ttyS0,38400
- CPU revision is: 00018448
- Primary instruction cache 16kb, linesize 16 bytes (4 ways)
- Primary data cache 16kb, linesize 16 bytes (4 ways)
- Number of TLB entries 16.
- Linux version 2.4.17_mvl21-malta-mips_fp_le (nico@nico-linux) (gcc version 2.95.3 20010315 (release/MontaVista)) #47 mer sep 27 06:50:53 CEST 2006
- Determined physical RAM map:
- memory: 14000000 @ 00000000 (reserved)
- memory: 00020000 @ 14000000 (ROM data)
- memory: 00fe0000 @ 14020000 (usable)
- On node 0 totalpages: 4096
- zone(0): 4096 pages.
- zone(1): 0 pages.
- zone(2): 0 pages.
- .........boot_code Adam2...........
- ..00....90....1a....3c....80....0b....5a....27....08....00..
- base address: 00000000
- env size: 1431655765
- ptr: a0000000
- Kernel command line:
- calculating r4koff... 000b71b0(750000)
- CPU frequency 150.00 MHz
- Calibrating delay loop... 149.91 BogoMIPS
- Freeing Adam2 reserved memory [0x14001000,0x0001f000]
- Memory: 13892k/16384k available (1879k kernel code, 2492k reserved, 139k data, 64k init)
- Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
- Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
- Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
- Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
- Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
- Checking for 'wait' instruction... unavailable.
- POSIX conformance testing by UNIFIX
- Linux NET4.0 for Linux 2.4
- Based upon Swansea University Computer Society NET3.039
- TI Optimizations: Allocating TI-Cached Memory Pool.
- Warning: Number of buffers is not configured.Setting default to 512
- Using 512 Buffers for TI-Cached Memory Pool.
- DEBUG: Using Hybrid Mode.
- NSP Optimizations: Succesfully allocated TI-Cached Memory Pool.
- Initializing RT netlink socket
- Starting kswapd
- Disabling the Out Of Memory Killer
- devfs: v1.7 (20011216) Richard Gooch (rgooch@atnf.csiro.au)
- devfs: boot_options: 0x1
- pty: 32 Unix98 ptys configured
- Serial driver version 5.05c (2001-07-08) with no serial options enabled
- ttyS00 at 0xa8610e00 (irq = 15) is a 16550A
- ttyS01 at 0xa8610f00 (irq = 16) is a 16550A
- Vlynq CONFIG_MIPS_AVALANCHE_VLYNQ_PORTS=2
- Vlynq Device vlynq0 registered with minor no 63 as misc device. Result=0
- Vlynq instance:0 Link UP
- Vlynq Device vlynq1 registered with minor no 62 as misc device. Result=0
- VLYNQ 1 : init failed
- block: 64 slots per queue, batch=16
- Using the MAC with external PHY
- Cpmac driver is allocating buffer memory at init time.
- Cpmac driver Disable TX complete interrupt setting threshold to 20.
- Default Asymmetric MTU for eth0 1500
- PPP generic driver version 2.4.1
- avalanche flash device: 0x400000 at 0x10000000.
- Amd/Fujitsu Extended Query Table v1.1 at 0x0040
- Physically mapped flash: Swapping erase regions for broken CFI table.
- number of CFI chips: 1
- Looking for mtd device :mtd0:
- Found a mtd0 image (0xe0000), with size (0x310000).
- Looking for mtd device :mtd1:
- Found a mtd1 image (0x20000), with size (0xc0000).
- Looking for mtd device :mtd2:
- Found a mtd2 image (0x0), with size (0x20000).
- Looking for mtd device :mtd3:
- Found a mtd3 image (0x3f0000), with size (0x10000).
- Looking for mtd device :mtd4:
- Found a mtd4 image (0x20000), with size (0x3d0000).
- Creating 5 MTD partitions on "Physically mapped flash":
- 0x000e0000-0x003f0000 : "mtd0"
- 0x00020000-0x000e0000 : "mtd1"
- 0x00000000-0x00020000 : "mtd2"
- 0x003f0000-0x00400000 : "mtd3"
- 0x00020000-0x003f0000 : "mtd4"
- NET4: Linux TCP/IP 1.0 for NET4.0
- IP Protocols: ICMP, UDP, TCP, IGMP
- IP: routing cache hash table of 512 buckets, 4Kbytes
- TCP: Hash tables configured (established 1024 bind 1024)
- IPv4 over IPv4 tunneling driver
- Default Asymmetric MTU for tunl0 1480
- GRE over IPv4 tunneling driver
- Default Asymmetric MTU for gre0 1476
- Linux IP multicast router 0.06 plus PIM-SM
- klips_info:ipsec_init: KLIPS startup, FreeS/WAN IPSec version: super-freeswan-1.99.8
- Default Asymmetric MTU for ipsec0 0
- Default Asymmetric MTU for ipsec1 0
- Default Asymmetric MTU for ipsec2 0
- Default Asymmetric MTU for ipsec3 0
- Default Asymmetric MTU for ipsec4 0
- klips_info:ipsec_alg_init: KLIPS alg v=0.8.1-0 (EALG_MAX=255, AALG_MAX=15)
- klips_info:ipsec_alg_init: calling ipsec_alg_static_init()
- ipsec_1des_init(alg_type=15 alg_id=2 name=1des): ret=0
- You should NOT load 1DES support except for testing purposes !
- ipsec_null_init(alg_type=15 alg_id=11 name=null): ret=0
- ip_conntrack version 2.0 (128 buckets, 1024 max) - 392 bytes per conntrack
- ip_tables: (c)2000 Netfilter core team
- netfilter PSD loaded - (c) astaro AG
- NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
- NET4: Ethernet Bridge 008 for NET4.0
- Initializing the WAN Bridge.
- Please set the MAC Address for the WAN Bridge.
- Set the Environment variable 'wan_br_mac'.
- MAC Address should be in the following format: xx.xx.xx.xx.xx.xx
- 802.1Q VLAN Support v1.6 Ben Greear <greearb@candelatech.com>
- vlan Initialization complete.
- VFS: Mounted root (squashfs filesystem) readonly.
- Mounted devfs on /dev
- Freeing unused kernel memory: 64k freed
- Firmware Version: v1.02.02-Skidoo
- Hit enter to continue...
- Restoring defaults...
- restore wireless default successfully
- done
- killall: httpd: no process killed
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- Configured 19 states
- now insmod tiatm
- Warning: loading tiatm will taint the kernel: no license
- See http://www.tux.org/lkml/#export-tainted for information about tainted modules
- registered device TI Avalanche SAR
- Sangam detected
- DSP binary filesize = 356930 bytes
- tn7dsl_set_modulation : Setting mode to 0x1
- Texas Instruments ATM driver: version:[6.00.01.00]
- Default Asymmetric MTU for br0 1500
- name=[eth0] lan_ifname=[br0]
- =====> set br0 hwaddr to eth0
- =====> set br0 hwaddr to eth0
- wlconf: No such file or directory
- device eth0 entered promiscuous mode
- br0: port 1(eth0) entering learning state
- Lan Ipaddr: 255.255.255.0 Netmask: 255.255.255.0................
- 255.255.255.0 255.255.255.0
- mixed mode
- insmod ap driver
- Warning: loading tiap will taint the kernel: no license
- See http://www.tux.org/lkml/#export-tainted for information about tainted modules
- Default Asymmetric MTU for wlan0 1500
- ret = 0152:
- 802.11d is 153: disabled.
- 153: 802.11h is 153: disabled.
- 153: Configuration succeeded !!!
- 153: WLAN driver database is up
- Resetting the remote device.
- Un-resetting the remote device.
- About to re-init the VLYNQ.
- Re-initialized the VLYNQ.
- 154: AcxRegAddr = 0xA4040000, AcxMemAddr = 0xA4000000
- 154: whal_acxProcInitiate: found DEVICE_VENDOR ID = 0x9066104c
- 154: whal_acxProcInitiate: Cpu halt -> download code
- 154: whal_acxProcLoadFwImage: 0xa4000000, 0x0
- 154: whal_acxProcLoadFwImage() -- Loading FW image154: Compiled for RADIA (bg) radio
- 154: whal_acxProcLoadFwImage: 1, pBuf=0xc00a0320, len=0x15564. Extra pBuf=0x0, len=0x3
- 155: whal_acxProcLoadFwImage: 2, pBuf=0xc00a0320, len=0x15564. Extra pBuf=0x0, len=0x3
- 155: whal_acxProcLoadFwImage: 3, pBuf=0xc00a0320, len=0x15564, DataLen=0x1555c
- 156: whal_acxProcLoadFwImage: 4, pBuf=0xc00a0320, len=0x15564
- 156: whal_acxProcLoadFwImage: Checksum, calc=0x71e76f, file=0x71e76f
- br0: port 1(eth0) entering forwarding state
- br0: topology change detected, propagating
- 159: whal_acxProcInitiate: run
- 159: whal_acxProcWaitInitComplete:
- 165: whal_acxMboxInit: pCmdMbox=0xa401dd00, pInfoMbox=0xa401de88
- 165: ----------------------------------------------------------------
- 165: ACX Firmaware Version = Rev 1.6.0.24
- 165: ----------------------------------------------------------------
- 165: whal_acxProcConfigure: templates (beacon, probe response, tim) for [0] Network
- 166: whal_acxProcConfigure: Host Queue is in 0x94D8E020
- 166: TxQueue[0] NumDesc = 32
- 166: TxQueue[0] Priority = 0
- 166: TxQueue[1] NumDesc = 32
- 166: TxQueue[1] Priority = 129
- 166:
- whal_acxConfigMemory() --
- HostRxDescriptorsAddr = 14d8e020
- 166: RxQueue NumDesc = 32
- 166: RxQueue Priority = 0
- 166: RxQueue type = 7
- 167: 167: whal_acxProcConfigure: WEP cache
- 167: whal_acxProcConfigure: read queue heads
- 167: whal_acxConfigRead_QueueHead() -
- 167: RxMemBlkQ - 00015920
- 167: RxQueueHead - 00012f14
- 168: TxMemBlkQ - 0001b320
- 168: TxMemBlkQ[0]- 00013594
- 168: TxMemBlkQ[1]- 00013c14
- 168: 168: whal_acxProcConfigure: configure RxQueue/TxQueue objects
- 168: whal_txQueue_Init: [Qid=0] HwBaseAddr=0xa4013594, NumDesc=32
- 168: whal_txQueue_Init: [Qid=1] HwBaseAddr=0xa4013c14, NumDesc=32
- 169: whal_ParamsPrintMemMap:
- 169: Code (0x00000000, 0x0001250c)
- Wep (0x000127e4, 0x000128f4)
- Sta (0x000128f4, 0x00012efc)
- Tmpl (0x00012524, 0x000125c1)
- Queue (0x00012f14, 0x00014294)
- Pool (0x00015920, 0x0001c720)
- 171: whal_apiConfig: beaconInterval = 100
- WATCH_DOG_TIMER_VAL = 520
- wd_beacon_limiter = 1
- 171: WLAN HAL layer is up
- 171: BssBridge is up
- 171: Mgmt is up
- 171: Rx is up
- 171: Tx is up
- 171: MemMngr is up
- 171: main state machine is up
- 192: WDRV_MAINSM: WLAN Driver initialized successfully
- 192: WDRV_4X: 4x Disabled
- 192: WDRV_4X: Concatenation Disabled
- 192: WDRV_4X: Ack Emulation Disabled
- 192: whal_apiStartBss: Enable Tx, Rx and Start the Bss
- 192: ----------------------------------------------------------------
- 192: ----------------------------------------------------------------
- 192: START BSS, SSID=linksys, BSSID=00-13-10-F3-9A-B0
- 193: ----------------------------------------------------------------
- 193: ----------------------------------------------------------------
- 193: AP Power Level = 1
- 193: Regulatory Domain = ETSI
- 193: Net[0] : Channel=11
- 193: ----------------------------------------------------------------
- 194: FW Watchdog is Enabled
- dda: wlan0 in initializing Succeeded wireless extensions: ret = 0
- wlan0 device is activated
- device wlan0 entered promiscuous mode
- br0: port 2(wlan0) entering learning state
- .............list ..............
- The boot is UNKNOWN
- tftp server started
- tftpd: standalone socket
- HTTPD start, port 80
- dhcpd:auto_search_ip=0,firstsetlanip=1
- .............list ..............
- info, udhcp server (v0.9.8) started
- done
- Now Start syslog.........................!!zebra disabled
- killall: adslpolling: no process killed
- tmp:0101a8c0
- tmp:00ffffff
- IDLE
- Hit enter to continue...Jan 1 00:00:18 : 5bUpnpd-igd-v010 start!!!
- wan def hwaddr 00:13:10:F3:9A:B1
- polling now .......
- upnpd-igd:current select wan connection:0
- upnp_content_num_0 = 14
- killall: begin_now: no process killed
- br0: port 2(wlan0) entering forwarding state
- br0: topology change detected, propagating
- send error
- send error
- send error
- send error
- BusyBox v1.2.0 (2006.09.26-10:20+0000) Built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- / #
- / #
- / # cd /tmp
- /tmp # cat loader.bin > /dev/mtd/3
- cat: loader.bin: No such file or directory
- /tmp # send error
- send error
- ls
- action cron.d igd status udhcpd.leases
- adslpolling hosts resolv.conf udhcpd.conf var
- /tmp # send error
- send error
- send error
- send error
- tftp -g -l /tmp/loader.bin -r psbl_4M_16M_AMD_AR7WRD.bin 192.168.1.80
- /tmp # ls
- action hosts resolv.conf udhcpd.leases
- adslpolling igd status var
- cron.d loader.bin udhcpd.conf
- /tmp # send error
- send error
- cat loader.bin > /dev/mtd/3
- Last[3] is 6fa7, datum is 9000
- cat: Write Error: Input/output error
- /tmp # send error
- send error
- send error
- send error
- cat loader.bin > /dev/mtdblock/3
- send error
- send error
- /tmp # ls
- action hosts resolv.conf udhcpd.leases
- adslpolling igd status var
- cron.d loader.bin udhcpd.conf
- /tmp # 9mup▒-DB
- dgH▒.g;▒ă*-"\1 ▒0I▒4▒H▒AY▒▒8▒ B▒@▒(▒P▒▒▒▒▒
- ▒
- ▒▒"▒▒@▒▒00
- !▒H
- @
- ADAM2 Revision 0.22.13
- (C) Copyright 1996-2003 Texas Instruments Inc. All Rights Reserved.
- (C) Copyright 2003 Telogy Networks, Inc.
- Usage: setmfreq [-d] [-s sys_freq, in MHz] [cpu_freq, in MHz]
- Memory optimization Complete!
- mac_init(): Find mac [00:13:10:F3:9A:B0] in location 0
- Find mac [00:13:10:F3:9A:B0] in location 0
- Update lan mac from [00:e0:a0:a6:66:70] to [00:13:10:F3:9A:B0]
- mac_value:00:13:10:F3:9A:B0
- tftpserver initialized
- Adam2_AR7WRD >
- Press any key to abort OS load, or wait 5 seconds for OS to boot...
- Launching kernel decompressor.
- Starting LZMA Uncompression Algorithm.
- Copyright (C) 2003 Texas Instruments Incorporated; Copyright (C) 1999-2003 Igor Pavlov.
- Compressed file is LZMA format.
- Kernel decompressor was successful ... launching kernel.
- LINUX started...
- Config serial console: ttyS0,38400
- CPU revision is: 00018448
- Primary instruction cache 16kb, linesize 16 bytes (4 ways)
- Primary data cache 16kb, linesize 16 bytes (4 ways)
- Number of TLB entries 16.
- Linux version 2.4.17_mvl21-malta-mips_fp_le (nico@nico-linux) (gcc version 2.95.3 20010315 (release/MontaVista)) #47 mer sep 27 06:50:53 CEST 2006
- Determined physical RAM map:
- memory: 14000000 @ 00000000 (reserved)
- memory: 00020000 @ 14000000 (ROM data)
- memory: 00fe0000 @ 14020000 (usable)
- On node 0 totalpages: 4096
- zone(0): 4096 pages.
- zone(1): 0 pages.
- zone(2): 0 pages.
- .........boot_code Adam2...........
- ..00....90....1a....3c....80....0b....5a....27....08....00..
- base address: 00000000
- env size: 1431655765
- ptr: a0000000
- Kernel command line:
- calculating r4koff... 000b71b0(750000)
- CPU frequency 150.00 MHz
- Calibrating delay loop... 149.91 BogoMIPS
- Freeing Adam2 reserved memory [0x14001000,0x0001f000]
- Memory: 13892k/16384k available (1879k kernel code, 2492k reserved, 139k data, 64k init)
- Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
- Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
- Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
- Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
- Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
- Checking for 'wait' instruction... unavailable.
- POSIX conformance testing by UNIFIX
- Linux NET4.0 for Linux 2.4
- Based upon Swansea University Computer Society NET3.039
- TI Optimizations: Allocating TI-Cached Memory Pool.
- Warning: Number of buffers is not configured.Setting default to 512
- Using 512 Buffers for TI-Cached Memory Pool.
- DEBUG: Using Hybrid Mode.
- NSP Optimizations: Succesfully allocated TI-Cached Memory Pool.
- Initializing RT netlink socket
- Starting kswapd
- Disabling the Out Of Memory Killer
- devfs: v1.7 (20011216) Richard Gooch (rgooch@atnf.csiro.au)
- devfs: boot_options: 0x1
- pty: 32 Unix98 ptys configured
- Serial driver version 5.05c (2001-07-08) with no serial options enabled
- ttyS00 at 0xa8610e00 (irq = 15) is a 16550A
- ttyS01 at 0xa8610f00 (irq = 16) is a 16550A
- Vlynq CONFIG_MIPS_AVALANCHE_VLYNQ_PORTS=2
- Vlynq Device vlynq0 registered with minor no 63 as misc device. Result=0
- Vlynq instance:0 Link UP
- Vlynq Device vlynq1 registered with minor no 62 as misc device. Result=0
- VLYNQ 1 : init failed
- block: 64 slots per queue, batch=16
- Using the MAC with external PHY
- Cpmac driver is allocating buffer memory at init time.
- Cpmac driver Disable TX complete interrupt setting threshold to 20.
- Default Asymmetric MTU for eth0 1500
- PPP generic driver version 2.4.1
- avalanche flash device: 0x400000 at 0x10000000.
- Amd/Fujitsu Extended Query Table v1.1 at 0x0040
- Physically mapped flash: Swapping erase regions for broken CFI table.
- number of CFI chips: 1
- Looking for mtd device :mtd0:
- Found a mtd0 image (0xe0000), with size (0x310000).
- Looking for mtd device :mtd1:
- Found a mtd1 image (0x20000), with size (0xc0000).
- Looking for mtd device :mtd2:
- Found a mtd2 image (0x0), with size (0x20000).
- Looking for mtd device :mtd3:
- Found a mtd3 image (0x3f0000), with size (0x10000).
- Looking for mtd device :mtd4:
- Found a mtd4 image (0x20000), with size (0x3d0000).
- Creating 5 MTD partitions on "Physically mapped flash":
- 0x000e0000-0x003f0000 : "mtd0"
- 0x00020000-0x000e0000 : "mtd1"
- 0x00000000-0x00020000 : "mtd2"
- 0x003f0000-0x00400000 : "mtd3"
- 0x00020000-0x003f0000 : "mtd4"
- NET4: Linux TCP/IP 1.0 for NET4.0
- IP Protocols: ICMP, UDP, TCP, IGMP
- IP: routing cache hash table of 512 buckets, 4Kbytes
- TCP: Hash tables configured (established 1024 bind 1024)
- IPv4 over IPv4 tunneling driver
- Default Asymmetric MTU for tunl0 1480
- GRE over IPv4 tunneling driver
- Default Asymmetric MTU for gre0 1476
- Linux IP multicast router 0.06 plus PIM-SM
- klips_info:ipsec_init: KLIPS startup, FreeS/WAN IPSec version: super-freeswan-1.99.8
- Default Asymmetric MTU for ipsec0 0
- Default Asymmetric MTU for ipsec1 0
- Default Asymmetric MTU for ipsec2 0
- Default Asymmetric MTU for ipsec3 0
- Default Asymmetric MTU for ipsec4 0
- klips_info:ipsec_alg_init: KLIPS alg v=0.8.1-0 (EALG_MAX=255, AALG_MAX=15)
- klips_info:ipsec_alg_init: calling ipsec_alg_static_init()
- ipsec_1des_init(alg_type=15 alg_id=2 name=1des): ret=0
- You should NOT load 1DES support except for testing purposes !
- ipsec_null_init(alg_type=15 alg_id=11 name=null): ret=0
- ip_conntrack version 2.0 (128 buckets, 1024 max) - 392 bytes per conntrack
- ip_tables: (c)2000 Netfilter core team
- netfilter PSD loaded - (c) astaro AG
- NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
- NET4: Ethernet Bridge 008 for NET4.0
- Initializing the WAN Bridge.
- Please set the MAC Address for the WAN Bridge.
- Set the Environment variable 'wan_br_mac'.
- MAC Address should be in the following format: xx.xx.xx.xx.xx.xx
- 802.1Q VLAN Support v1.6 Ben Greear <greearb@candelatech.com>
- vlan Initialization complete.
- VFS: Mounted root (squashfs filesystem) readonly.
- Mounted devfs on /dev
- Freeing unused kernel memory: 64k freed
- Firmware Version: v1.02.02-Skidoo
- Hit enter to continue...
- Restoring defaults...
- restore wireless default successfully
- done
- killall: httpd: no process killed
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- in led config
- Configured 19 states
- now insmod tiatm
- Warning: loading tiatm will taint the kernel: no license
- See http://www.tux.org/lkml/#export-tainted for information about tainted modules
- registered device TI Avalanche SAR
- Sangam detected
- DSP binary filesize = 356930 bytes
- tn7dsl_set_modulation : Setting mode to 0x1
- Texas Instruments ATM driver: version:[6.00.01.00]
- Default Asymmetric MTU for br0 1500
- name=[eth0] lan_ifname=[br0]
- =====> set br0 hwaddr to eth0
- =====> set br0 hwaddr to eth0
- wlconf: No such file or directory
- device eth0 entered promiscuous mode
- br0: port 1(eth0) entering learning state
- Lan Ipaddr: 255.255.255.0 Netmask: 255.255.255.0................
- 255.255.255.0 255.255.255.0
- mixed mode
- insmod ap driver
- Warning: loading tiap will taint the kernel: no license
- See http://www.tux.org/lkml/#export-tainted for information about tainted modules
- Default Asymmetric MTU for wlan0 1500
- ret = 0152:
- 802.11d is 153: disabled.
- 153: 802.11h is 153: disabled.
- 153: Configuration succeeded !!!
- 153: WLAN driver database is up
- Resetting the remote device.
- Un-resetting the remote device.
- About to re-init the VLYNQ.
- Re-initialized the VLYNQ.
- 154: AcxRegAddr = 0xA4040000, AcxMemAddr = 0xA4000000
- 154: whal_acxProcInitiate: found DEVICE_VENDOR ID = 0x9066104c
- 154: whal_acxProcInitiate: Cpu halt -> download code
- 154: whal_acxProcLoadFwImage: 0xa4000000, 0x0
- 154: whal_acxProcLoadFwImage() -- Loading FW image154: Compiled for RADIA (bg) radio
- 154: whal_acxProcLoadFwImage: 1, pBuf=0xc00a0320, len=0x15564. Extra pBuf=0x0, len=0x3
- 155: whal_acxProcLoadFwImage: 2, pBuf=0xc00a0320, len=0x15564. Extra pBuf=0x0, len=0x3
- 155: whal_acxProcLoadFwImage: 3, pBuf=0xc00a0320, len=0x15564, DataLen=0x1555c
- 156: whal_acxProcLoadFwImage: 4, pBuf=0xc00a0320, len=0x15564
- 156: whal_acxProcLoadFwImage: Checksum, calc=0x71e76f, file=0x71e76f
- br0: port 1(eth0) entering forwarding state
- br0: topology change detected, propagating
- 159: whal_acxProcInitiate: run
- 159: whal_acxProcWaitInitComplete:
- 165: whal_acxMboxInit: pCmdMbox=0xa401dd00, pInfoMbox=0xa401de88
- 165: ----------------------------------------------------------------
- 165: ACX Firmaware Version = Rev 1.6.0.24
- 165: ----------------------------------------------------------------
- 165: whal_acxProcConfigure: templates (beacon, probe response, tim) for [0] Network
- 166: whal_acxProcConfigure: Host Queue is in 0x94D8E020
- 166: TxQueue[0] NumDesc = 32
- 166: TxQueue[0] Priority = 0
- 166: TxQueue[1] NumDesc = 32
- 166: TxQueue[1] Priority = 129
- 166:
- whal_acxConfigMemory() --
- HostRxDescriptorsAddr = 14d8e020
- 166: RxQueue NumDesc = 32
- 166: RxQueue Priority = 0
- 167: RxQueue type = 7
- 167: 167: whal_acxProcConfigure: WEP cache
- 167: whal_acxProcConfigure: read queue heads
- 167: whal_acxConfigRead_QueueHead() -
- 167: RxMemBlkQ - 00015920
- 167: RxQueueHead - 00012f14
- 168: TxMemBlkQ - 0001b320
- 168: TxMemBlkQ[0]- 00013594
- 168: TxMemBlkQ[1]- 00013c14
- 168: 168: whal_acxProcConfigure: configure RxQueue/TxQueue objects
- 168: whal_txQueue_Init: [Qid=0] HwBaseAddr=0xa4013594, NumDesc=32
- 168: whal_txQueue_Init: [Qid=1] HwBaseAddr=0xa4013c14, NumDesc=32
- 169: whal_ParamsPrintMemMap:
- 169: Code (0x00000000, 0x0001250c)
- Wep (0x000127e4, 0x000128f4)
- Sta (0x000128f4, 0x00012efc)
- Tmpl (0x00012524, 0x000125c1)
- Queue (0x00012f14, 0x00014294)
- Pool (0x00015920, 0x0001c720)
- 171: whal_apiConfig: beaconInterval = 100
- WATCH_DOG_TIMER_VAL = 520
- wd_beacon_limiter = 1
- 171: WLAN HAL layer is up
- 171: BssBridge is up
- 171: Mgmt is up
- 171: Rx is up
- 171: Tx is up
- 171: MemMngr is up
- 171: main state machine is up
- 192: WDRV_MAINSM: WLAN Driver initialized successfully
- 192: WDRV_4X: 4x Disabled
- 192: WDRV_4X: Concatenation Disabled
- 192: WDRV_4X: Ack Emulation Disabled
- 192: whal_apiStartBss: Enable Tx, Rx and Start the Bss
- 192: ----------------------------------------------------------------
- 192: ----------------------------------------------------------------
- 192: START BSS, SSID=linksys, BSSID=00-13-10-F3-9A-B0
- 193: ----------------------------------------------------------------
- 193: ----------------------------------------------------------------
- 193: AP Power Level = 1
- 193: Regulatory Domain = ETSI
- 193: Net[0] : Channel=11
- 193: ----------------------------------------------------------------
- 194: FW Watchdog is Enabled
- dda: wlan0 in initializing Succeeded wireless extensions: ret = 0
- wlan0 device is activated
- device wlan0 entered promiscuous mode
- br0: port 2(wlan0) entering learning state
- .............list ..............
- The boot is UNKNOWN
- tftp server started
- tftpd: standalone socket
- HTTPD start, port 80
- dhcpd:auto_search_ip=0,firstsetlanip=1
- .............list ..............
- info, udhcp server (v0.9.8) started
- done
- Now Start syslog.........................!!zebra disabled
- tmp:0101a8c0
- tmp:00ffffff
- Jan 1 00:00:18 : 5bUpnpd-igd-v010 start!!!
- killall: adslpolling: no process killed
- IDLE
- Hit enter to continue...wan def hwaddr 00:13:10:F3:9A:B1
- polling now .......
- upnpd-igd:current select wan connection:0
- upnp_content_num_0 = 14
- killall: begin_now: no process killed
- br0: port 2(wlan0) entering forwarding state
- br0: topology change detected, propagating
- send error
- send error
- BusyBox v1.2.0 (2006.09.26-10:20+0000) Built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- / #
- / # erase
- usage: erase [device]
- / # write
- usage: write [path] [device]
- / #
- / # send error
- send error
- send error
- send error
- send error
- send error
- send error
- send error
- https://pastebin.com/Xyw9Yc5xsend error
- send error
- send error
- send error
- riority = 0
- /bin/sh: https://pastebin.com/Xyw9Yc5xriority: not found
- 166: TxQueue[1] NumDesc = 32
- 166: T/ # 166: TxQueue[1] NumDesc = 32
- /bin/sh: 166:: not found
- / # 166: TxQueue[1] Priority = 129
- /bin/sh: 166:: not found
- / # 166:
- /bin/sh: 166:: not found
- / # whal_acxConfigMemory() --
- / # HostRxDescriptorsAddr = 14d8e020
- /bin/sh: HostRxDescriptorsAddr: not found
- / # 166: RxQueue NumDesc = 32
- /bin/sh: 166:: not found
- / # 166: RxQueue Priority = 0
- /bin/sh: 166:: not found
- / # 167: RxQueue type = 7
- /bin/sh: 167:: not found
- / # 167: 167: whal_acxProcConfigure: WEP cache
- /bin/sh: 167:: not found
- / # 167: whal_acxProcConfigure: read queue heads
- /bin/sh: 167:: not found
- / # 167: whal_acxConfigRead_QueueHead() -
- /bin/sh: Syntax error: "(" unexpected
- / # 167: RxMemBlkQ - 00015920
- /bin/sh: 167:: not found
- / # 167: RxQueueHead - 00012f14
- /bin/sh: 167:: not found
- / # 168: TxMemBlkQ - 0001b320
- /bin/sh: 168:: not found
- / # 168: TxMemBlkQ[0]- 00013594
- /bin/sh: 168:: not found
- / # 168: TxMemBlkQ[1]- 00013c14
- /bin/sh: 168:: not found
- / # 168: 168: whal_acxProcConfigure: configure RxQueue/TxQueue objects
- /bin/sh: 168:: not found
- / # 168: whal_txQueue_Init: [Qid=0] HwBaseAddr=0xa4013594, NumDesc=32
- /bin/sh: 168:: not found
- / # 168: whal_txQueue_Init: [Qid=1] HwBaseAddr=0xa4013c14, NumDesc=32
- /bin/sh: 168:: not found
- / # 169: whal_ParamsPrintMemMap:
- /bin/sh: 169:: not found
- / # 169: Code (0x00000000, 0x0001250c)
- /bin/sh: Syntax error: "(" unexpected
- / # Wep (0x000127e4, 0x000128f4)
- /bin/sh: Syntax error: word unexpected (expecting ")")
- / # Sta (0x000128f4, 0x00012efc)
- /bin/sh: Syntax error: word unexpected (expecting ")")
- / # Tmpl (0x00012524, 0x000125c1)
- /bin/sh: Syntax error: word unexpected (expecting ")")
- / # Queue (0x00012f14, 0x00014294)
- /bin/sh: Syntax error: word unexpected (expecting ")")
- / # Pool (0x00015920, 0x0001c720)
- /bin/sh: Syntax error: word unexpected (expecting ")")
- / # 171: whal_apiConfig: beaconInterval = 100
- /bin/sh: 171:: not found
- / # WATCH_DOG_TIMER_VAL = 520
- /bin/sh: WATCH_DOG_TIMER_VAL: not found
- / # wd_beacon_limiter = 1
- /bin/sh: wd_beacon_limiter: not found
- / # 171: WLAN HAL layer is up
- /bin/sh: 171:: not found
- / # 171: BssBridge is up
- /bin/sh: 171:: not found
- / # 171: Mgmt is up
- /bin/sh: 171:: not found
- / # 171: Rx is up
- /bin/sh: 171:: not found
- / # 171: Tx is up
- /bin/sh: 171:: not found
- / # 171: MemMngr is up
- /bin/sh: 171:: not found
- / # 171: main state machine is up
- /bin/sh: 171:: not found
- / # 192: WDRV_MAINSM: WLAN Driver initialized successfully
- /bin/sh: 192:: not found
- / #
- / # 192: WDRV_4X: 4x Disabled
- /bin/sh: 192:: not found
- / # 192: WDRV_4X: Concatenation Disabled
- /bin/sh: 192:: not found
- / # 192: WDRV_4X: Ack Emulation Disabled
- /bin/sh: 192:: not found
- / # 192: whal_apiStartBss: Enable Tx, Rx and Start the Bss
- /bin/sh: 192:: not found
- / # 192: ----------------------------------------------------------------
- /bin/sh: 192:: not found
- / # 192: ----------------------------------------------------------------
- /bin/sh: 192:: not found
- / # 192: START BSS, SSID=linksys, BSSID=00-13-10-F3-9A-B0
- /bin/sh: 192:: not found
- / # 193: ----------------------------------------------------------------
- /bin/sh: 193:: not found
- / # 193: ----------------------------------------------------------------
- /bin/sh: 193:: not found
- / # 193: AP Power Level = 1
- /bin/sh: 193:: not found
- / # 193: Regulatory Domain = ETSI
- /bin/sh: 193:: not found
- / # 193: Net[0] : Channel=11
- /bin/sh: 193:: not found
- / # 193: ----------------------------------------------------------------
- /bin/sh: 193:: not found
- / # 194: FW Watchdog is Enabled
- /bin/sh: 194:: not found
- / # dda: wlan0 in initializing Succeeded wireless extensions: ret = 0
- /bin/sh: dda:: not found
- / # wlan0 device is activated
- /bin/sh: wlan0: not found
- / # device wlan0 entered promiscuous mode
- /bin/sh: device: not found
- / # br0: port 2(wlan0) entering learning state
- /bin/sh: Syntax error: "(" unexpected
- / # .............list ..............
- /bin/sh: .............list: not found
- / # The boot is UNKNOWN
- /bin/sh: The: not found
- / # tftp server started
- e socket
- HTTPD start, port 80
- dhcpd:auto_search_ip=0,firstsetlanip=1
- .............list ..............
- info, udhcp server (v0.9.8) started
- done
- Now Start syslog.........................!!zebrBusyBox v1.2.0 (2006.09.26-10:20+0000) multi-call binary
- Usage: tftp [OPTION]... HOST [PORT]
- / # tftpd: standalone socket
- /bin/sh: tftpd:: not found
- a disabled
- tmp:0101a8c0
- tmp:00ffffff
- Ja/ # HTTPD start, port 80
- /bin/sh: HTTPD: not found
- / # dhcpd:auto_search_ip=0,firstsetlanip=1
- /bin/sh: dhcpd:auto_search_ip=0,firstsetlanip=1: not found
- / # .............list ..............
- /bin/sh: .............list: not found
- / # info, udhcp server (v0.9.8) started
- n 1 00:00:18 : 5bUpnpd-igd-v010 start/bin/sh: Syntax error: "(" unexpected
- / # done
- /bin/sh: Syntax error: "done" unexpected
- / # Now Start syslog.........................!!zebra disabled
- /bin/sh: Now: not found
- / # tmp:0101a8c0
- /bin/sh: tmp:0101a8c0: not found
- / # tmp:00ffffff
- /bin/sh: tmp:00ffffff: not found
- / # Jan 1 00:00:18 : 5bUpnpd-igd-v010 start!!!
- /bin/sh: Jan: not found
- / #
- / # killall: adslpolling: no process killed
- /bin/sh: killall:: not found
- / # IDLE
- /bin/sh: IDLE: not found
- / # Hit enter to continue...wan def hwaddr 00:13:10:F3:9A:B1
- /bin/sh: Hit: not found
- / # polling now .......
- /bin/sh: polling: not found
- / # upnpd-igd:current select wan connection:0
- /bin/sh: upnpd-igd:current: not found
- / # upnp_content_num_0 = 14
- /bin/sh: upnp_content_num_0: not found
- / # killall: begin_now: no process killed
- /bin/sh: killall:: not found
- / # br0: port 2(wlan0) entering forwarding state
- /bin/sh: Syntax error: "(" unexpected
- / # br0: topology change detected, propagating
- /bin/sh: br0:: not found
- / # send error
- /bin/sh: send: not found
- / # send error
- /bin/sh: send: not found
- / #
- / #
- / #
- / # BusyBox v1.2.0 (2006.09.26-10:20+0000) Built-in shell (ash)
- /bin/sh: Syntax error: "(" unexpected
- / # Enter 'help' for a list of built-in commands.
- /bin/sh: Enter: not found
- / #
- / #
- / # 1▒8!▒8N▒▒&Ŧ▒L▒!mA▒z0▒▒K▒]▒!z`A▒D▒$▒▒▒ .▒G
- ▒.G▒▒b$(@@▒D@▒`▒▒▒▒E ▒"▒▒!PF▒▒F d▒▒▒@@ ▒▒A(03
- ▒
- ADAM2 Revision 0.22.13
- (C) Copyright 1996-2003 Texas Instruments Inc. All Rights Reserved.
- (C) Copyright 2003 Telogy Networks, Inc.
- Usage: setmfreq [-d] [-s sys_freq, in MHz] [cpu_freq, in MHz]
- Memory optimization Complete!
- mac_init(): Find mac [00:13:10:F3:9A:B0] in location 0
- Find mac [00:13:10:F3:9A:B0] in location 0
- mac_value:00:13:10:F3:9A:B0
- tftpserver initialized
- Adam2_AR7WRD >
- Press any key to abort OS load, or wait 5 seconds for OS to boot...
- Launching kernel decompressor.
- Starting LZMA Uncompression Algorithm.
- Copyright (C) 2003 Texas Instruments Incorporated; Copyright (C) 1999-2003 Igor Pavlov.
- Compressed file is LZMA format.
- Kernel decompressor was successful ... launching kernel.
- LINUX started...
- Config serial console: ttyS0,38400
- CPU revision is: 00018448
- Primary instruction cache 16kb, linesize 16 bytes (4 ways)
- Primary data cache 16kb, linesize 16 bytes (4 ways)
- Number of TLB entries 16.
- Linux version 2.4.17_mvl21-malta-mips_fp_le (nico@nico-linux) (gcc version 2.95.3 20010315 (release/MontaVista)) #47 mer sep 27 06:50:53 CEST 2006
- Determined physical RAM map:
- memory: 14000000 @ 00000000 (reserved)
- memory: 00020000 @ 14000000 (ROM data)
- memory: 00fe0000 @ 14020000 (usable)
- On node 0 totalpages: 4096
- zone(0): 4096 pages.
- zone(1): 0 pages.
- zone(2): 0 pages.
- .........boot_code Adam2...........
- ..00....90....1a....3c....80....0b....5a....27....08....00..
- base address: 00000000
- env size: 1431655765
- ptr: a0000000
- Kernel command line:
- calculating r4koff... 000b71b0(750000)
- CPU frequency 150.00 MHz
- Calibrating delay loop... 149.91 BogoMIPS
- Freeing Adam2 reserved memory [0x14001000,0x0001f000]
- Memory: 13892k/16384k available (1879k kernel code, 2492k reserved, 139k data, 64k init)
- Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
- Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
- Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
- Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
- Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
- Checking for 'wait' instruction... unavailable.
- POSIX conformance testing by UNIFIX
- Linux NET4.0 for Linux 2.4
- Based upon Swansea University Computer Society NET3.039
- TI Optimizations: Allocating TI-Cached Memory Pool.
- Warning: Number of buffers is not configured.Setting default to 512
- Using 512 Buffers for TI-Cached Memory Pool.
- DEBUG: Using Hybrid Mode.
- NSP Optimizations: Succesfully allocated TI-Cached Memory Pool.
- Initializing RT netlink socket
- Starting kswapd
- Disabling the Out Of Memory Killer
- devfs: v1.7 (20011216) Richard Gooch (rgooch@atnf.csiro.au)
- devfs: boot_options: 0x1
- pty: 32 Unix98 ptys configured
- Serial driver version 5.05c (2001-07-08) with no serial options enabled
- ttyS00 at 0xa8610e00 (irq = 15) is a 16550A
- ttyS01 at 0xa8610f00 (irq = 16) is a 16550A
- Vlynq CONFIG_MIPS_AVALANCHE_VLYNQ_PORTS=2
- Vlynq Device vlynq0 registered with minor no 63 as misc device. Result=0
- Vlynq instance:0 Link UP
- Vlynq Device vlynq1 registered with minor no 62 as misc device. Result=0
- VLYNQ 1 : init failed
- block: 64 slots per queue, batch=16
- Using the MAC with external PHY
- Cpmac driver is allocating buffer memory at init time.
- Cpmac driver Disable TX complete interrupt setting threshold to 20.
- Default Asymmetric MTU for eth0 1500
- PPP generic driver version 2.4.1
- avalanche flash device: 0x400000 at 0x10000000.
- Amd/Fujitsu Extended Query Table v1.1 at 0x0040
- Physically mapped flash: Swapping erase regions for broken CFI table.
- number of CFI chips: 1
- Looking for mtd device :mtd0:
- Found a mtd0 image (0xe0000), with size (0x310000).
- Looking for mtd device :mtd1:
- Found a mtd1 image (0x20000), with size (0xc0000).
- Looking for mtd device :mtd2:
- Found a mtd2 image (0x0), with size (0x20000).
- Looking for mtd device :mtd3:
- Found a mtd3 image (0x3f0000), with size (0x10000).
- Looking for mtd device :mtd4:
- Found a mtd4 image (0x20000), with size (0x3d0000).
- Creating 5 MTD partitions on "Physically mapped flash":
- 0x000e0000-0x003f0000 : "mtd0"
- 0x00020000-0x000e0000 : "mtd1"
- 0x00000000-0x00020000 : "mtd2"
- 0x003f0000-0x00400000 : "mtd3"
- 0x00020000-0x003f0000 : "mtd4"
- NET4: Linux TCP/IP 1.0 for NET4.0
- IP Protocols: ICMP, UDP, TCP, IGMP
- IP: routing cache hash table of 512 buckets, 4Kbytes
- TCP: Hash tables configured (established 1024 bind 1024)
- IPv4 over IPv4 tunneling driver
- Default Asymmetric MTU for tunl0 1480
- GRE over IPv4 tunneling driver
- Default Asymmetric MTU for gre0 1476
- Linux IP multicast router 0.06 plus PIM-SM
- klips_info:ipsec_init: KLIPS startup, FreeS/WAN IPSec version: super-freeswan-1.99.8
- Default Asymmetric MTU for ipsec0 0
- Default Asymmetric MTU for ipsec1 0
- Default Asymmetric MTU for ipsec2 0
- Default Asymmetric MTU for ipsec3 0
- Default Asymmetric MTU for ipsec4 0
- klips_info:ipsec_alg_init: KLIPS alg v=0.8.1-0 (EALG_MAX=255, AALG_MAX=15)
- klips_info:ipsec_alg_init: calling ipsec_alg_static_init()
- ipsec_1des_init(alg_type=15 alg_id=2 name=1des): ret=0
- You should NOT load 1DES support except for testing purposes !
- ipsec_null_init(alg_type=15 alg_id=11 name=null): ret=0
- ip_conntrack version 2.0 (128 buckets, 1024 max) - 392 bytes per conntrack
- ip_tables: (c)2000 Netfilter core team
- netfilter PSD loaded - (c) astaro AG
- NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
- NET4: Ethernet Bridge 008 for NET4.0
- Initializing the WAN Bridge.
- Please set the MAC Address for the WAN Bridge.
- Set the Environment variable 'wan_br_mac'.
- MAC Address should be in the following format: xx.xx.xx.xx.xx.xx
- 802.1Q VLAN Support v1.6 Ben Greear <greearb@candelatech.com>
- vlan Initialization complete.
- VFS: Mounted root (squashfs filesystem) readonly.
- Mounted devfs on /dev
- Freeing unused kernel memory: 64k freed
- Firmware Version: v1.02.02-Skidoo
- Hit enter to continue...killall: httpd: no process killed
- Configured 19 states
- now insmod tiatm
- Warning: loading tiatm will taint the kernel: no license
- See http://www.tux.org/lkml/#export-tainted for information about tainted modules
- name=[eth0] lan_ifname=[br0]
- =====> set br0 hwaddr to eth0
- =====> set br0 hwaddr to eth0
- wlconf: No such file or directory
- Lan Ipaddr: 255.255.255.0 Netmask: 255.255.255.0................
- 255.255.255.0 255.255.255.0
- mixed mode
- insmod ap driver
- Warning: loading tiap will taint the kernel: no license
- See http://www.tux.org/lkml/#export-tainted for information about tainted modules
- ret = 0
- .............list ..............
- The boot is UNKNOWN
- tftp server started
- tftpd: standalone socket
- HTTPD start, port 80
- dhcpd:auto_search_ip=0,firstsetlanip=1
- .............list ..............
- info, udhcp server (v0.9.8) started
- done
- Now Start syslog.........................!!zebra disabled
- killall: adslpolling: no process killed
- IDLE
- Hit enter to continue...wan def hwaddr 00:13:10:F3:9A:B1
- polling now .......
- Jan 1 00:00:13 : 5bUpnpd-igd-v010 start!!!
- upnpd-igd:current select wan connection:0
- upnp_content_num_0 = 14
- killall: begin_now: no process killed
- send error
- send error
Add Comment
Please, Sign In to add comment