Ledger Nano X - The secure hardware wallet
SHARE
TWEET

OpenWRT HG556a MX29LV128DB dmesg

a guest Jan 5th, 2012 2,147 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] Linux version 2.6.39.4 (dani@tool) (gcc version 4.5.4 20110808 (prerelease) (Linaro GCC 4.5-2011.08) ) #34 Wed Jan 4 22:16:19 CET 2012
  2. [    0.000000] Detected Broadcom 0x6358 CPU revision a1
  3. [    0.000000] CPU frequency is 300 MHz
  4. [    0.000000] 64MB of RAM installed
  5. [    0.000000] registering 40 GPIOs
  6. [    0.000000] board_bcm963xx: Boot address 0xbe000000
  7. [    0.000000] board_bcm963xx: CFE version: 100.48.56-49.46
  8. [    0.000000] bootconsole [early0] enabled
  9. [    0.000000] CPU revision is: 0002a010 (Broadcom BMIPS4350)
  10. [    0.000000] board_bcm963xx: board name: HW556
  11. [    0.000000] Determined physical RAM map:
  12. [    0.000000]  memory: 04000000 @ 00000000 (usable)
  13. [    0.000000] Initrd not found or empty - disabling initrd
  14. [    0.000000] Zone PFN ranges:
  15. [    0.000000]   Normal   0x00000000 -> 0x00004000
  16. [    0.000000] Movable zone start PFN for each node
  17. [    0.000000] early_node_map[1] active PFN ranges
  18. [    0.000000]     0: 0x00000000 -> 0x00004000
  19. [    0.000000] On node 0 totalpages: 16384
  20. [    0.000000] free_area_init_node: node 0, pgdat 802840e0, node_mem_map 81000000
  21. [    0.000000]   Normal zone: 128 pages used for memmap
  22. [    0.000000]   Normal zone: 0 pages reserved
  23. [    0.000000]   Normal zone: 16256 pages, LIFO batch:3
  24. [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  25. [    0.000000] pcpu-alloc: [0] 0
  26. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
  27. [    0.000000] Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
  28. [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  29. [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  30. [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  31. [    0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
  32. [    0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  33. [    0.000000] Memory: 62016k/65536k available (2145k kernel code, 3520k reserved, 368k data, 160k init, 0k highmem)
  34. [    0.000000] NR_IRQS:128
  35. [    0.000000] Calibrating delay loop... 299.26 BogoMIPS (lpj=598528)
  36. [    0.036000] pid_max: default: 32768 minimum: 301
  37. [    0.040000] Mount-cache hash table entries: 512
  38. [    0.052000] NET: Registered protocol family 16
  39. [    0.064000] MPI_CSBASE_REG(0) = 0x1e000000
  40. [    0.068000] changed ath9k regdomain to 0xff
  41. [    0.072000] registering PCI controller with io_map_base unset
  42. [    0.084000] bio: create slab <bio-0> at 0
  43. [    0.092000] pci 0000:00:01.0: [168c:ff1d] type 0 class 0x000200
  44. [    0.092000] pci 0000:00:01.0: fixup device configuration
  45. [    0.096000] pci-ath9k-fixup: Writing 0x0029168c to register 0x6000
  46. [    0.100000] pci-ath9k-fixup: Writing 0x02800001 to register 0x6008
  47. [    0.104000] pci-ath9k-fixup: Writing 0x2091168c to register 0x602c
  48. [    0.108000] pci-ath9k-fixup: Writing 0x002a168c to register 0x5000
  49. [    0.112000] pci-ath9k-fixup: Writing 0x02800001 to register 0x5008
  50. [    0.116000] pci-ath9k-fixup: Writing 0x2091168c to register 0x502c
  51. [    0.120000] pci-ath9k-fixup: Writing 0x05040cc0 to register 0x5064
  52. [    0.124000] pci-ath9k-fixup: Writing 0x00033811 to register 0x506c
  53. [    0.128000] pci-ath9k-fixup: Writing 0x0040073b to register 0x4004
  54. [    0.132000] pci-ath9k-fixup: Writing 0x00000003 to register 0x4074
  55. [    0.136000] pci-ath9k-fixup: Writing 0x01c20000 to register 0x4000
  56. [    0.140000] pci-ath9k-fixup: Writing 0x00000044 to register 0x6034
  57. [    0.144000] pci-ath9k-fixup: Device vendor 0x168c, id 0x0029
  58. [    0.148000] pci 0000:00:01.0: reg 10: [mem 0x00000000-0x0000ffff]
  59. [    0.160000] pci 0000:00:01.0: PME# supported from D0 D3hot
  60. [    0.160000] pci 0000:00:01.0: PME# disabled
  61. [    0.164000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x3000ffff]
  62. [    0.168000] pci 0000:00:01.0: BAR 0: set to [mem 0x30000000-0x3000ffff] (PCI address [0x30000000-0x3000ffff])
  63. [    0.172000] Switching to clocksource MIPS
  64. [    0.184000] NET: Registered protocol family 2
  65. [    0.188000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  66. [    0.196000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  67. [    0.204000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  68. [    0.212000] TCP: Hash tables configured (established 2048 bind 2048)
  69. [    0.216000] TCP reno registered
  70. [    0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  71. [    0.228000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  72. [    0.236000] NET: Registered protocol family 1
  73. [    0.240000] PCI: CLS 0 bytes, default 32
  74. [    0.240000] audit: initializing netlink socket (disabled)
  75. [    0.248000] type=2000 audit(0.248:1): initialized
  76. [    0.252000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  77. [    0.260000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  78. [    0.272000] msgmni has been set to 121
  79. [    0.276000] io scheduler noop registered
  80. [    0.280000] io scheduler deadline registered (default)
  81. [    0.284000] bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0100 (irq = 10) is a bcm63xx_uart
  82. [    0.292000] console [ttyS0] enabled, bootconsole disabled
  83. [    0.308000] bcm963xx-flash bcm963xx-flash.0: 0x02000000 at 0x1e000000
  84. [    0.316000] Number of erase regions: 2
  85. [    0.320000] Primary Vendor Command Set: 0002 (AMD/Fujitsu Standard)
  86. [    0.328000] Primary Algorithm Table at 0040
  87. [    0.332000] Alternative Vendor Command Set: 0000 (None)
  88. [    0.336000] No Alternate Algorithm Table
  89. [    0.340000] Vcc Minimum:  3.0 V
  90. [    0.344000] Vcc Maximum:  3.6 V
  91. [    0.348000] No Vpp line
  92. [    0.348000] Typical byte/word write timeout: 16 б╣s
  93. [    0.356000] Maximum byte/word write timeout: 512 б╣s
  94. [    0.360000] Full buffer write not supported
  95. [    0.364000] Typical block erase timeout: 1024 ms
  96. [    0.368000] Maximum block erase timeout: 16384 ms
  97. [    0.372000] Chip erase not supported
  98. [    0.376000] Device size: 0x1000000 bytes (16 MiB)
  99. [    0.380000] Flash Device Interface description: 0x0002
  100. [    0.388000]   - supports x8 and x16 via BYTE# with asynchronous interface
  101. [    0.392000] Max. bytes in buffer write: 0x1
  102. [    0.400000] Number of Erase Block Regions: 2
  103. [    0.404000]   Erase Region #0: BlockSize 0x2000 bytes, 8 blocks
  104. [    0.408000]   Erase Region #1: BlockSize 0x10000 bytes, 255 blocks
  105. [    0.416000] bcm963xx: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227a,
  106. [    0.424000] bcm963xx: Found an alias at 0x1000000 for the chip at 0x0
  107. [    0.424000] Amd/Fujitsu Extended Query Table at 0x0040
  108. [    0.432000]   Amd/Fujitsu Extended Query version 1.3.
  109. [    0.436000]   Silicon revision: 0
  110. [    0.440000]   Address sensitive unlock: Required
  111. [    0.444000]   Erase Suspend: Read/write
  112. [    0.448000]   Block protection: 4 sectors per group
  113. [    0.452000]   Temporary block unprotect: Supported
  114. [    0.460000]   Block protect/unprotect scheme: 4
  115. [    0.464000]   Number of simultaneous operations: 0
  116. [    0.468000]   Burst mode: Not supported
  117. [    0.472000]   Page mode: Not supported
  118. [    0.476000]   Vpp Supply Minimum Program/Erase Voltage: 10.5 V
  119. [    0.480000]   Vpp Supply Maximum Program/Erase Voltage: 11.5 V
  120. [    0.488000]   Top/Bottom Boot Block: Bottom boot
  121. [    0.492000] number of CFI chips: 1
  122. [    0.496000] bcm963xx_flash: Read Signature value of CFE1CFE1
  123. [    0.500000] bcm963xx-flash bcm963xx-flash.0: CFE bootloader detected
  124. [    0.508000] bcm963xx_flash: CFE boot tag found with version 8 and board type HW556
  125. [    0.516000] bcm963xx_flash: Partition 0 is CFE offset 0 and length 20000
  126. [    0.524000] bcm963xx_flash: Partition 1 is kernel offset 20100 and length dff00
  127. [    0.532000] bcm963xx_flash: Partition 2 is rootfs offset 100000 and length d00000
  128. [    0.540000] bcm963xx_flash: Partition 3 is ath_data offset e00000 and length 1e0000
  129. [    0.548000] bcm963xx_flash: Partition 4 is nvram offset fe0000 and length 20000
  130. [    0.552000] bcm963xx_flash: Partition 5 is linux offset 20000 and length de0000
  131. [    0.560000] bcm963xx_flash: Spare partition is 360000 offset and length aa0000
  132. [    0.568000] Creating 6 MTD partitions on "bcm963xx":
  133. [    0.576000] 0x000000000000-0x000000020000 : "CFE"
  134. [    0.584000] 0x000000020100-0x000000100000 : "kernel"
  135. [    0.588000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  136. [    0.604000] 0x000000100000-0x000000e00000 : "rootfs"
  137. [    0.612000] mtd: partition "rootfs" set to be root filesystem
  138. [    0.620000] mtd: partition "rootfs_data" created automatically, ofs=340000, len=AC0000
  139. [    0.628000] 0x000000340000-0x000000e00000 : "rootfs_data"
  140. [    0.636000] 0x000000e00000-0x000000fe0000 : "ath_data"
  141. [    0.648000] 0x000000fe0000-0x000001000000 : "nvram"
  142. [    0.656000] 0x000000020000-0x000000e00000 : "linux"
  143. [    0.672000] bcm63xx-wdt bcm63xx-wdt.0:  started, timer margin: 30 sec
  144. [    0.680000] Registered led device: message
  145. [    0.680000] Registered led device: hspa
  146. [    0.680000] Registered led device: dsl
  147. [    0.680000] Registered led device: power
  148. [    0.680000] Registered led device: all_leds
  149. [    0.684000] TCP westwood registered
  150. [    0.688000] NET: Registered protocol family 17
  151. [    0.692000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  152. [    0.700000] All bugs added by David S. Miller <davem@redhat.com>
  153. [    0.716000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  154. [    0.724000] Freeing unused kernel memory: 160k freed
  155. [    3.588000] roboswitch: Probing device eth0: found a 5325! It's a 5350.
  156. [    4.656000] There is already a switch registered on the device 'eth0'
  157. [   12.668000] Compat-wireless backport release: compat-wireless-2011-11-29
  158. [   12.676000] Backport based on wireless-testing.git master-2011-12-01
  159. [   12.896000] cfg80211: Calling CRDA to update world regulatory domain
  160. [   13.752000] cfg80211: World regulatory domain updated:
  161. [   13.756000] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  162. [   13.764000] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  163. [   13.776000] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  164. [   13.784000] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  165. [   13.792000] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  166. [   13.800000] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  167. [   14.444000] SCSI subsystem initialized
  168. [   14.544000] There is already a switch registered on the device 'eth0'
  169. [   14.944000] usbcore: registered new interface driver usbfs
  170. [   14.948000] usbcore: registered new interface driver hub
  171. [   14.960000] usbcore: registered new device driver usb
  172. [   16.544000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
  173. [   16.548000] board_bcm963xx: Setting device platform data
  174. [   16.564000] ath: eeprom contains invalid mac address: ff:ff:ff:ff:ff:ff
  175. [   16.572000] ath: random mac address will be used: c2:65:4e:21:a4:cc
  176. [   16.580000] ath: EEPROM regdomain: 0xff
  177. [   16.580000] ath: EEPROM indicates we should expect a direct regpair map
  178. [   16.580000] ath: Country alpha2 being used: JP
  179. [   16.580000] ath: Regpair used: 0xff
  180. [   16.588000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  181. [   16.592000] Registered led device: ath9k-phy0
  182. [   16.592000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xc02e0000, irq=39
  183. [   16.604000] cfg80211: Calling CRDA for country: JP
  184. [   16.760000] cfg80211: Regulatory domain changed to country: JP
  185. [   16.764000] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  186. [   16.776000] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  187. [   16.784000] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (N/A, 2000 mBm)
  188. [   16.788000] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
  189. [   16.796000] cfg80211:     (4910000 KHz - 4930000 KHz @ 10000 KHz), (N/A, 2300 mBm)
  190. [   16.804000] cfg80211:     (4910000 KHz - 4990000 KHz @ 40000 KHz), (N/A, 2300 mBm)
  191. [   16.812000] cfg80211:     (4930000 KHz - 4950000 KHz @ 10000 KHz), (N/A, 2300 mBm)
  192. [   16.820000] cfg80211:     (5030000 KHz - 5045000 KHz @ 10000 KHz), (N/A, 2300 mBm)
  193. [   16.828000] cfg80211:     (5030000 KHz - 5090000 KHz @ 40000 KHz), (N/A, 2300 mBm)
  194. [   16.836000] cfg80211:     (5050000 KHz - 5060000 KHz @ 10000 KHz), (N/A, 2300 mBm)
  195. [   16.844000] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  196. [   16.852000] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  197. [   16.860000] cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2300 mBm)
  198. [   16.904000] Button Hotplug driver version 0.4.1
  199. [   17.880000] NTFS driver 2.1.30 [Flags: R/O MODULE].
  200. [   18.428000] PPP generic driver version 2.4.2
  201. [   18.656000] ip_tables: (C) 2000-2006 Netfilter Core Team
  202. [   18.980000] NET: Registered protocol family 24
  203. [   19.228000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  204. [   19.236000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
  205. [   19.244000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
  206. [   19.276000] bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300
  207. [   19.292000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
  208. [   19.300000] hub 1-0:1.0: USB hub found
  209. [   19.304000] hub 1-0:1.0: 2 ports detected
  210. [   19.620000] nf_conntrack version 0.5.0 (971 buckets, 3884 max)
  211. [   19.740000] usb 1-1: new high speed USB device number 2 using bcm63xx_ehci
  212. [   20.124000] hub 1-1:1.0: USB hub found
  213. [   20.136000] hub 1-1:1.0: 2 ports detected
  214. [   20.544000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  215. [   20.548000] bcm63xx_ohci bcm63xx_ohci.0: BCM63XX integrated OHCI controller
  216. [   20.556000] bcm63xx_ohci bcm63xx_ohci.0: new USB bus registered, assigned bus number 2
  217. [   20.564000] bcm63xx_ohci bcm63xx_ohci.0: irq 13, io mem 0xfffe1400
  218. [   20.632000] hub 2-0:1.0: USB hub found
  219. [   20.636000] hub 2-0:1.0: 1 port detected
  220. [   20.916000] Initializing USB Mass Storage driver...
  221. [   20.924000] usbcore: registered new interface driver usb-storage
  222. [   20.928000] USB Mass Storage support registered.
  223. [   21.140000] input: gpio-buttons as /devices/platform/gpio-buttons.0/input/input0
  224. [   23.776000] eth0: link forced UP - 100/full - flow control off/off
  225. [   24.192000] device eth0 entered promiscuous mode
  226. [   24.296000] br-lan: port 1(eth0) entering forwarding state
  227. [   24.300000] br-lan: port 1(eth0) entering forwarding state
  228. [   41.988000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
  229. [   41.996000] jffs2_build_filesystem(): unlocking the mtd device... done.
  230. [   42.000000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
  231. [  138.476000] JFFS2 notice: (975) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Top