Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 4.4.141+ (root@build2) (gcc version 4.7.2 (Debian 4.7.2-5astra.se1.mipsel) ) #6 SMP PREEMPT Tue Jul 24 12:00:28 MSK 2018
- [ 0.000000] Enable data prefetch
- [ 0.000000] Enable instruction prefetch
- [ 0.000000] CPU0 revision is: 0001a830 (MIPS P5600)
- [ 0.000000] FPU revision is: 30f30320
- [ 0.000000] MSA revision is: 00000320
- [ 0.000000] Machine device tree at: 0x87df5000
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 07000000 @ 00000000 (usable)
- [ 0.000000] memory: 70000000 @ 20000000 (usable)
- [ 0.000000] Initial ramdisk at: 0x86000000 (8517024 bytes)
- [ 0.000000] MIPS: machine is T-Platforms mITX Board
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000000000-0x0000000001ffffff]
- [ 0.000000] Normal [mem 0x0000000002000000-0x000000001fffffff]
- [ 0.000000] HighMem [mem 0x0000000020000000-0x000000008fffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000006ffffff]
- [ 0.000000] node 0: [mem 0x0000000020000000-0x000000008fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000008fffffff]
- [ 0.000000] VPE topology {1,1} total 2
- [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 64kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.000000] MIPS secondary cache 1024kB, 8-way, linesize 32 bytes.
- [ 0.000000] PERCPU: Embedded 3 pages/cpu @82530000 s13728 r8192 d27232 u49152
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121783
- [ 0.000000] Kernel command line: root=/dev/sda6 rw rootwait earlyprintk=uart8520,mmio32,0x1f04a000,115200 maxcpus=2 consoleblank=0 console=tty1 console=ttyS0,115200n8 video=sm750fb:800x600-32@60 nohtw nocoherentio ieee754=relaxed
- [ 0.000000] PID hash table entries: 512 (order: -3, 2048 bytes)
- [ 0.000000] Dentry cache hash table entries: 16384 (order: 2, 65536 bytes)
- [ 0.000000] Inode-cache hash table entries: 8192 (order: 1, 32768 bytes)
- [ 0.000000] Writing ErrCtl register=800008f0
- [ 0.000000] Readback ErrCtl register=800008f0
- [ 0.000000] Cache parity protection enabled
- [ 0.000000] L2 cache parity protection enabled
- [ 0.000000] MAAR configuration:
- [ 0.000000] [0]: 0x00000000-0x06ffffff speculate
- [ 0.000000] [1]: 0x20000000-0x8fffffff speculate
- [ 0.000000] [2]: disabled
- [ 0.000000] Memory: 1926256K/1949696K available (6686K kernel code, 319K rwdata, 1032K rodata, 272K init, 199K bss, 23440K reserved, 0K cma-reserved, 1835008K highmem)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] Build-time adjustment of leaf fanout to 32.
- [ 0.000000] NR_IRQS:255
- [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0x114c1bbbeec, max_idle_ns: 440795229572 ns
- [ 0.000000] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
- [ 0.000005] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
- [ 0.000044] CPU timer frequency: 1200 MHz
- [ 0.000122] Console: colour dummy device 80x25
- [ 0.000859] console [tty1] enabled
- [ 0.000893] Calibrating delay loop... 1197.05 BogoMIPS (lpj=598528)
- [ 0.009974] pid_max: default: 32768 minimum: 301
- [ 0.010043] Security Framework initialized
- [ 0.010083] Mount-cache hash table entries: 4096 (order: 0, 16384 bytes)
- [ 0.010107] Mountpoint-cache hash table entries: 4096 (order: 0, 16384 bytes)
- [ 0.010615] Initializing cgroup subsys io
- [ 0.010649] Initializing cgroup subsys memory
- [ 0.010688] Initializing cgroup subsys devices
- [ 0.010712] Initializing cgroup subsys freezer
- [ 0.010735] Initializing cgroup subsys net_cls
- [ 0.010757] Initializing cgroup subsys pids
- [ 0.011013] Performance counters: mips/P5600 PMU enabled, 4 32-bit counters available to each CPU, irq 3
- [ 0.022387] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.022392] Primary data cache 64kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.022400] MIPS secondary cache 1024kB, 8-way, linesize 32 bytes.
- [ 0.022485] CPU1 revision is: 0001a830 (MIPS P5600)
- [ 0.022488] FPU revision is: 30f30320
- [ 0.022491] MSA revision is: 00000320
- [ 0.037155] Brought up 2 CPUs
- [ 0.037746] devtmpfs: initialized
- [ 0.040355] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
- [ 0.040401] futex hash table entries: 512 (order: 0, 16384 bytes)
- [ 0.040557] prandom: seed boundary self test passed
- [ 0.042163] prandom: 100 self tests passed
- [ 0.042922] NET: Registered protocol family 16
- [ 0.044163] dw_pcie_init: PCIE_RSTC after reset: 00004000 (mask was 0)
- [ 0.044196] dw_pcie_init: DEV_ID_VEND_ID=0x80601d39 CLASS_CODE_REV_ID=0x6040101
- [ 0.044243] dw_pcie_init: PCIe error code = 0x0
- [ 0.044262] dw_pcie_init: PCIe link speed GEN1
- [ 0.044280] PCIe initialization complete.
- [ 0.044303] PCIe DMA: read chans=4, write chans=4
- [ 0.044367] CMP IOCU detected
- [ 0.044385] Hardware DMA cache coherency disabled
- [ 0.047431] Can't analyze schedule() prologue at 8077fa34
- [ 0.063861] dw_dmac 1f041000.dma: DesignWare DMA Controller, 8 channels
- [ 0.064173] vgaarb: loaded
- [ 0.064497] SCSI subsystem initialized
- [ 0.064994] usbcore: registered new interface driver usbfs
- [ 0.065078] usbcore: registered new interface driver hub
- [ 0.065164] usbcore: registered new device driver usb
- [ 0.066269] pcf857x: probe of 1-0021 failed with error -140
- [ 0.066377] media: Linux media interface: v0.10
- [ 0.066454] Linux video capture interface: v2.00
- [ 0.066547] pps_core: LinuxPPS API ver. 1 registered
- [ 0.066568] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.066640] PTP clock support registered
- [ 0.066977] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.067841] clocksource: Switched to clocksource GIC
- [ 0.068050] FS-Cache: Loaded
- [ 0.076550] NET: Registered protocol family 2
- [ 0.076999] TCP established hash table entries: 4096 (order: 0, 16384 bytes)
- [ 0.077047] TCP bind hash table entries: 4096 (order: 1, 32768 bytes)
- [ 0.077089] TCP: Hash tables configured (established 4096 bind 4096)
- [ 0.077138] UDP hash table entries: 512 (order: 0, 16384 bytes)
- [ 0.077174] UDP-Lite hash table entries: 512 (order: 0, 16384 bytes)
- [ 0.077292] NET: Registered protocol family 1
- [ 0.077486] Trying to unpack rootfs image as initramfs...
- [ 0.077653] rootfs image is not initramfs (junk in compressed archive); looks like an initrd
- [ 0.086713] Freeing initrd memory: 8304K
- [ 0.087055] be-apb 1f059000.apb_ehb: Baikal Peripheral Bus Error handler
- [ 0.087080] be-apb 1f059000.apb_ehb: Version 1.02
- [ 0.087353] be-axi 1f04d110.axi_ehb: Baikal Interconnect Error handler
- [ 0.087377] be-axi 1f04d110.axi_ehb: Version 1.02
- [ 0.087573] be-emc 1f042000.emc: Baikal Extended Memory controller
- [ 0.087597] be-emc 1f042000.emc: Version 1.01
- [ 0.087622] be-emc 1f042000.emc: DDR3 x4 ranks:1 ecc:off burst:16 bus:DQ/1 timing:1T bchop:0 bmode:0
- [ 0.087795] be-wdt axi:gic_wdt: Baikal Electronics GIC Watchdog Driver
- [ 0.087818] be-wdt axi:gic_wdt: Version 1.01
- [ 0.087873] be-wdt axi:gic_wdt: Mode: Programm Interval Timer
- [ 0.088603] audit: initializing netlink subsys (disabled)
- [ 0.088673] audit: type=2000 audit(0.077:1): initialized
- [ 0.088975] Initialise system trusted keyring
- [ 0.096091] VFS: Disk quotas dquot_6.6.0
- [ 0.096286] VFS: Dquot-cache hash table entries: 4096 (order 0, 16384 bytes)
- [ 0.100748] bounce: pool size: 64 pages
- [ 0.100879] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
- [ 0.100994] io scheduler noop registered (default)
- [ 0.101016] io scheduler deadline registered
- [ 0.101059] io scheduler cfq registered
- [ 0.101945] PCI host bridge /axi/pci@1F052000 ranges:
- [ 0.101986] IO 0x1bd00000..0x1bd0ffff -> 0x00000000
- [ 0.102013] MEM 0x08000000..0x1bafffff -> 0x20000000
- [ 0.102235] dw-pcie 1f052000.pci: PCI host bridge to bus 0000:00
- [ 0.102262] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.102285] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
- [ 0.102309] pci_bus 0000:00: root bus resource [mem 0x08000000-0x1bafffff] (bus address [0x20000000-0x33afffff])
- [ 0.102942] pci 0000:00:00.0: PCI bridge to [bus 01-ff] (subtractive decode)
- [ 0.103038] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
- [ 0.103062] pci 0000:00:00.0: BAR 9: assigned [mem 0x08100000-0x081fffff pref]
- [ 0.103097] pci 0000:00:00.0: BAR 7: assigned [io 0x0000-0x0fff]
- [ 0.103120] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 0.103141] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff]
- [ 0.103164] pci 0000:00:00.0: bridge window [mem 0x08000000-0x080fffff]
- [ 0.103187] pci 0000:00:00.0: bridge window [mem 0x08100000-0x081fffff pref]
- [ 0.103529] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
- [ 0.104438] console [ttyS0] disabled
- [ 0.104488] 1f04a000.serial0: ttyS0 at MMIO 0x1f04a000 (irq = 55, base_baud = 459558) is a 16550A
- [ 0.944191] console [ttyS0] enabled
- [ 0.948096] 1f04b000.serial1: ttyS1 at MMIO 0x1f04b000 (irq = 56, base_baud = 459558) is a 16550A
- [ 0.957612] [drm] Initialized drm 1.1.0 20060810
- [ 0.964278] brd: module loaded
- [ 0.969345] loop: module loaded
- [ 0.972589] at24 1-0053: 4096 byte 24c32 EEPROM, writable, 32 bytes/write
- [ 0.979460] at24 1-0050: 256 byte 24c02 EEPROM, writable, 16 bytes/write
- [ 0.986627] ahci 1f050000.sata: SSS flag set, parallel bus scan disabled
- [ 0.993417] ahci 1f050000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
- [ 1.002017] ahci 1f050000.sata: flags: ncq sntf stag pm led clo only pmp fbs pio slum part ccc apst
- [ 1.011236] ahci 1f050000.sata: port 0 is not capable of FBS
- [ 1.018470] ahci 1f050000.sata: port 1 is not capable of FBS
- [ 1.026476] scsi host0: ahci
- [ 1.029823] scsi host1: ahci
- [ 1.033025] ata1: SATA max UDMA/133 mmio [mem 0x1f050000-0x1f051fff] port 0x100 irq 71
- [ 1.041021] ata2: SATA max UDMA/133 mmio [mem 0x1f050000-0x1f051fff] port 0x180 irq 71
- [ 1.049647] spi_master (null): problem registering spi master
- [ 1.055477] dw_spi_mmio: probe of 1f04f000.spi1 failed with error -22
- [ 1.263604] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.270197] ehci-pci: EHCI PCI platform driver
- [ 1.274715] ehci-platform: EHCI generic platform driver
- [ 1.280139] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 1.285785] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
- [ 1.293851] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x00010010
- [ 1.302646] xhci-hcd xhci-hcd.0.auto: irq 88, io mem 0x1f100000
- [ 1.308715] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.315551] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.322825] usb usb1: Product: xHCI Host Controller
- [ 1.327739] usb usb1: Manufacturer: Linux 4.4.141+ xhci-hcd
- [ 1.333347] usb usb1: SerialNumber: xhci-hcd.0.auto
- [ 1.338592] hub 1-0:1.0: USB hub found
- [ 1.342403] hub 1-0:1.0: 1 port detected
- [ 1.346539] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 1.352166] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
- [ 1.359941] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 1.368154] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
- [ 1.374986] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.382263] usb usb2: Product: xHCI Host Controller
- [ 1.387173] usb usb2: Manufacturer: Linux 4.4.141+ xhci-hcd
- [ 1.392782] usb usb2: SerialNumber: xhci-hcd.0.auto
- [ 1.398016] hub 2-0:1.0: USB hub found
- [ 1.401821] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
- [ 1.409156] usbcore: registered new interface driver uas
- [ 1.414563] usbcore: registered new interface driver usb-storage
- [ 1.420796] mousedev: PS/2 mouse device common for all mice
- [ 1.426542] rtc-pcf2127 1-0051: pcf2127_get_datetime: read error
- [ 1.432699] rtc-pcf2127 1-0051: rtc core: registered rtc-pcf2127 as rtc0
- [ 1.439470] i2c /dev entries driver
- [ 1.443725] ledtrig-cpu: registered to indicate activity on CPUs
- [ 1.449901] hidraw: raw HID events driver (C) Jiri Kosina
- [ 1.455408] usbcore: registered new interface driver usbhid
- [ 1.461022] usbhid: USB HID core driver
- [ 1.464921] options:800x600-32@60
- [ 1.468269] parameter left for chip specific analysis:800x600-32@60
- [ 1.474631] mitx2-bmc 1-0008: mitx2 bmc probe
- [ 1.479103] mitx2-bmc 1-0008: Could not read register 0
- [ 1.504924] mitx2-bmc 1-0008: Could not read register 0
- [ 1.512865] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 1.519230] ata1.00: ATA-9: nanoSSD 3SE, S141002C, max UDMA/133
- [ 1.525197] ata1.00: 15649200 sectors, multi 16: LBA48 NCQ (depth 31/32)
- [ 1.530920] mitx2-bmc 1-0008: Could not read register 0
- [ 1.537344] ata1.00: configured for UDMA/133
- [ 1.542986] scsi 0:0:0:0: Direct-Access ATA nanoSSD 3SE 002C PQ: 0 ANSI: 5
- [ 1.551828] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB)
- [ 1.551930] mitx2-bmc 1-0008: Could not read register 0
- [ 1.560909] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 1.570213] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.572919] mitx2-bmc 1-0008: Could not read register 0
- [ 1.580350] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.590751] sda: sda1 sda2 < sda5 sda6 >
- [ 1.593912] mitx2-bmc 1-0008: Could not read register 0
- [ 1.600809] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.614917] mitx2-bmc 1-0008: Could not read register 0
- [ 1.640919] mitx2-bmc 1-0008: Could not read register 0
- [ 1.652856] usb 1-1: new high-speed USB device number 2 using xhci-hcd
- [ 1.666919] mitx2-bmc 1-0008: Could not read register 0
- [ 1.692917] mitx2-bmc 1-0008: Could not read register 0
- [ 1.718862] mitx2-bmc: probe of 1-0008 failed with error -5
- [ 1.725607] u32 classifier
- [ 1.728375] Performance counters on
- [ 1.732318] input device check on
- [ 1.736030] Actions configured
- [ 1.739592] NET: Registered protocol family 17
- [ 1.744139] Key type dns_resolver registered
- [ 1.749025] Loading compiled-in X.509 certificates
- [ 1.754127] rtc-pcf2127 1-0051: pcf2127_get_datetime: read error
- [ 1.760204] rtc-pcf2127 1-0051: hctosys: unable to read the hardware clock
- [ 1.768157] ALSA device list:
- [ 1.771178] No soundcards found.
- [ 1.774789] ttyS0 - failed to request DMA
- [ 1.779032] usb 1-1: New USB device found, idVendor=0424, idProduct=2422
- [ 1.785803] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.808124] hub 1-1:1.0: USB hub found
- [ 1.811983] hub 1-1:1.0: 2 ports detected
- [ 1.883862] ata2: SATA link down (SStatus 0 SControl 300)
- [ 1.899958] RAMDISK: Couldn't find valid RAM disk image starting at 0.
- [ 1.907482] EXT4-fs (sda6): couldn't mount as ext3 due to feature incompatibilities
- [ 1.915456] EXT4-fs (sda6): couldn't mount as ext2 due to feature incompatibilities
- [ 2.077302] EXT4-fs (sda6): recovery complete
- [ 2.082617] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.090377] VFS: Mounted root (ext4 filesystem) on device 8:6.
- [ 2.096631] devtmpfs: mounted
- [ 2.099752] Freeing unused kernel memory: 272K
- INIT: version 2.88 booting
- [info] Using makefile-style concurrent boot in runlevel S.
- [warn] Files under mount point '/run' will be hidden. ... (warning).
- [....] Starting the hotplug events dispatcher: udevd[ 2.557163] udevd[833]: starting version 175
- . ok
- [ ok ] Synthesizing the initial hotplug events...done.
- [....] Waiting for /dev to be fully populated...[ 2.868222] baikal-dwmac 1f05e000.eth1: Baikal Electronics DWMAC glue driver
- [ 2.904687] baikal-dwmac 1f05e000.eth1: no reset control found
- [ 2.914633] stmmac - user ID: 0x10, Synopsys ID: 0x37
- [ 2.920065] Ring mode enabled
- [ 2.933064] DMA HW capability register supported
- [ 2.937724] Enhanced/Alternate descriptors
- [ 2.942775] Enabled extended descriptors
- [ 2.947614] RX Checksum Offload Engine supported (type 2)
- [ 2.953224] TX Checksum insertion supported
- [ 2.957566] Wake-Up On Lan supported
- [ 2.961335] Enable RX Mitigation via HW Watchdog Timer
- [ 2.980677] libphy: stmmac: probed
- [ 2.984149] eth%d: PHY ID 00221622 at 3 IRQ POLL (stmmac-0:03) active
- done.
- [ ok ] Setting hostname to 'astra'...done.
- [ ok ] Setting preliminary keymap...done.
- [ ok ] Activating swap:.
- [ 3.776038] EXT4-fs (sda6): re-mounted. Opts: (null)
- [ ok ] Cleaning up temporary files...[....] Cleaning /tmp...done.
- [ ok .
- [ 4.069650] random: nonblocking pool is initialized
- [ ok ] Will now activate lvm and md swap:done.
- [info] Will now check all file systems.
- fsck from util-linux 2.20.1
- Checking all file systems.
- [....] Done checking file systems. A log is being saved in /var/log/fsck/checkfs if that location is wri[ ok ..
- [ ok ] Will now mount local filesystems:.
- [ ok ] Will now activate swapfile swap:done.
- [ ok ] Checking minimum space in /tmp...done.
- [ ok ] Cleaning up temporary files....
- [....] Mounting parsecfs...[ 5.872559] parsec: loading out-of-tree module taints kernel.
- [ 5.889928] PARSEC: Initializing...
- [ 5.893508] PARSEC: Initialized
- done.
- [ ok ] Setting nochmodx...done.
- [ ok ] Setting mandate environment...done.
- [....] Setting default audit...2070 0:0
- done.
- [ ok ] Starting parsec : parsec.
- [ ok ] Setting kernel variables ... /etc/sysctl.conf...done.
- [....] Starting rpcbind daemon...[ 6.578566] NET: Registered protocol family 10
- . ok
- [ ok ] Cleaning up temporary files....
- [ ok ] Setting up ALSA...done.
- [info] Setting console screen modes.
- setterm: cannot (un)set powersave mode: Inappropriate ioctl for device
- [9;30][14;30][info] Skipping font and keymap setup (handled by console-setup).
- [ ok ] Setting up console font and keymap...done.
- [ ok ] Skip starting firewall: ufw (not enabled)...done.
- [ ok ] Initializing random number generator...done.
- [ ok ] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix.
- INIT: Entering runlevel: 2
- [info] Using makefile-style concurrent boot in runlevel 2.
- [ ok ] Starting rpcbind daemon...[....] Already running..
- [ ok ] Starting enhanced syslogd: rsyslogd.
- [ ok ] Starting PARSec log daemon: parlogd.
- [ 8.214816] capability: warning: `start-stop-daem' uses 32-bit capabilities (legacy support in use)
- [....] Starting ACPI services...RTNETLINK1 answers: No such file or directory
- acpid: error talking to the kernel via netlink
- . ok
- [ ok ] Starting anac(h)ronistic cron: anacron.
- [ ok ] Starting OpenBSD Secure Shell server: sshd.
- [ ok ] Starting system message bus: dbus.
- [ ok ] Starting periodic command scheduler: cron.
- [....] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon[ 8.496224] Start CHROOT HOOK
- [ 8.499285] CHROOT/PIVOT COUNT: 0
- [ 8.499285] - PID: 2837
- [ 8.499285] - COMM: avahi-daemon
- [ 8.508622] SUPER CHROOT: Update label
- [ 8.512441] PIVOT NEW LEVEL: 0
- . ok
- [....] Starting Common Unix Printing System: cupsdStarting Fly Display Manager: fly-dm.
- . ok
- [ ok ] Starting Network connection manager: wicd.
- [ ok ] Running local boot scripts (/etc/rc.local).
- [ 15.106036] No MAC Management Counters available
- [ 989.978176] baikal-dwmac 1f05e000.eth1 eth0: Link is Up - 100Mbps/Full - flow control rx/tx
- [ 1045.293049] No MAC Management Counters available
- [ 1045.298270] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 1045.526110] No MAC Management Counters available
- [ 1045.531207] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 1048.526180] baikal-dwmac 1f05e000.eth1 eth0: Link is Up - 100Mbps/Full - flow control rx/tx
- [ 1048.536600] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 1109.014453] Start CHROOT HOOK
- [ 1109.017489] CHROOT/PIVOT COUNT: 1
- [ 1109.017489] - PID: 3271
- [ 1109.017489] - COMM: avahi-autoipd
- [ 1109.027135] SIMPLE CHROOT
- [ 1109.029790] PIVOT NEW LEVEL: 0
- [ 1122.284097] No MAC Management Counters available
- [ 1122.289579] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 1125.282180] baikal-dwmac 1f05e000.eth1 eth0: Link is Up - 100Mbps/Full - flow control rx/tx
- [ 1125.292550] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement