HT2000W Modem Bootlog

SBL: Oct 28 2016 06:53:40

U-Boot 2013.10 (Feb 17 2017 - 11:47:06)

DRAM:  512 MiB

 /######## /##                 /##
|__  ##__/| ##                | ##
   | ##   | HUGHES#   /###### | #######   /######
   | ##   | ##__  ## /##__  ##| ##__  ## /##__  ##
   | ##   | ##  \ ##| NETWORK#| ##  \ ##| ########
   | ##   | ##  | ##| ##_____/| ##  | ##| ##_____/
   | ##   | ##  | ##|  #######| SYSTEMS/|  #######
   |__/   |__/  |__/ \_______/|_______/  \_______/

NAND:  128 MiB
Using default environment

In:    serial
Out:   serial
Err:   serial
## Error: Can't overwrite "ethaddr"
## Error inserting "ethaddr" variable, errno=1
Num Cores Powered: 4
Net:   GMAC Addr: MAC: 0x15800000 DMA: 15801000
sgmac-0
Hit any key to stop autoboot:  2  1  0
### JFFS2 loading 'ncore.txt' to 0x80800000
Scanning JFFS2 FS:   .   done.
### JFFS2 load complete: 6 bytes loaded to 0x80800000
I'm OK
### JFFS2 loading 'uImage' to 0x80800000
### JFFS2 load complete: 13410403 bytes loaded to 0x80800000
## Booting kernel from Legacy Image at 80800000 ...
   Image Name:   Linux-3.10.53.cge-rt50
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    13410305 Bytes = 12.8 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Loading Kernel Image ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 3.10.53.cge-rt50 (jupbuild@jupcm1) (gcc version 4.9.1 (GCC) ) #40 SMP Wed Jan 18 11:58:22 EST 2017
CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: ARM-Versatile Express, model: hughes,thebe
bootconsole [earlycon0] enabled
Memory policy: ECC disabled, Data cache writealloc
Mapped:SWP_UART1 physical:0x14100000 virtual:0xf9100000 pages:2 map_type:MT_DEVICE
Mapped:SWP_GP_TMR1 physical:0x14000000 virtual:0xf9103000 pages:2 map_type:MT_DEVICE
Mapped:SWP_GP_TMR2 physical:0x14080000 virtual:0xf9106000 pages:2 map_type:MT_DEVICE
Mapped:PVT_M2SRAM physical:0x00800000 virtual:0xf9109000 pages:16 map_type:MT_DEVICE
Mapped:DPP_DTCM physical:0x21040000 virtual:0xf911a000 pages:64 map_type:MT_UNCACHED
Mapped:UPP_DTCM physical:0x31020000 virtual:0xf915b000 pages:32 map_type:MT_UNCACHED
Mapped:SWP_RESERVED physical:0x00000000 virtual:0xf917c000 pages:397 map_type:MT_DEVICE
Mapped:L2CC physical:0x19000000 virtual:0xf930a000 pages:2 map_type:MT_DEVICE
Mapped:SWP_ENET1_CNTLR physical:0x15800000 virtual:0xf930d000 pages:2 map_type:MT_DEVICE
Mapped:SWP_ENET2_CNTLR physical:0x15900000 virtual:0xf9310000 pages:2 map_type:MT_DEVICE
Mapped:SWP_DDR_KERN_RES physical:0xfc000000 virtual:0xf9313000 pages:128 map_type:MT_DEVICE
Mapped:SWP_DDR_USER_RES_PEP_CACHED physical:0xfc080000 virtual:0xf9394000 pages:1536 map_type:MT_DEVICE_CACHED
Mapped:SWP_DDR_USER_RES physical:0xfc680000 virtual:0xf9995000 pages:14720 map_type:MT_DEVICE
Mapped:SWP_GLUE physical:0x15000000 virtual:0xfd316000 pages:2 map_type:MT_DEVICE
Mapped:SWP_FLASH physical:0x17000000 virtual:0xfd319000 pages:9 map_type:MT_DEVICE
Mapped:PCM physical:0x18e00000 virtual:0xfd323000 pages:1 map_type:MT_DEVICE
Mapped:IPC_MSGRAM physical:0x18000000 virtual:0xfd325000 pages:8 map_type:MT_DEVICE
Mapped:DPP_GPIO physical:0x24200000 virtual:0xfd32e000 pages:1 map_type:MT_DEVICE
Mapped:UPP_GPIO physical:0x34200000 virtual:0xfd330000 pages:1 map_type:MT_DEVICE
Mapped:SWP_GPIO physical:0x14200000 virtual:0xfd332000 pages:1 map_type:MT_DEVICE
Mapped:DPP_VIC physical:0x25100000 virtual:0xfd334000 pages:1 map_type:MT_DEVICE
Mapped:DMD_COM physical:0x23000000 virtual:0xfd336000 pages:1 map_type:MT_DEVICE
Mapped:RXFEC_SR physical:0x23f02000 virtual:0xfd338000 pages:1 map_type:MT_DEVICE
Mapped:RCS_GPIO physical:0x34200000 virtual:0xfd33a000 pages:1 map_type:MT_DEVICE
Mapped:IPC_MU1_SWP2FCS physical:0x18200000 virtual:0xfd33c000 pages:1 map_type:MT_DEVICE
Mapped:IPC_MU3_SWP2RCS physical:0x18600000 virtual:0xfd33e000 pages:1 map_type:MT_DEVICE
Mapped:TXHA_DISEQC physical:0x33a00000 virtual:0xfd340000 pages:1 map_type:MT_DEVICE
Mapped:WDOG physical:0x18f00000 virtual:0xfd342000 pages:1 map_type:MT_DEVICE
thebe_dt_cortex_a9_scu_base: f8000000
Thebe: Brought USB out of reset
PERCPU: Embedded 7 pages/cpu @812c0000 s7232 r8192 d13248 u32768
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113792
Kernel command line: root=/dev/ram console=ttyAMA0,115200 earlyprintk mem=448M ramoops.mem_address=0xfc700000 ramoops.mem_size=0x40000 ramoops.ecc=0
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 448MB = 448MB total
Memory: 438896k/438896k available, 19856k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0x9c800000 - 0xff000000   (1576 MB)
    lowmem  : 0x80000000 - 0x9c000000   ( 448 MB)
    modules : 0x7f000000 - 0x80000000   (  16 MB)
      .text : 0x80008000 - 0x8033cd44   (3284 kB)
      .init : 0x8041d000 - 0x80edcc40   (11008 kB)
      .data : 0x80ede000 - 0x80f14760   ( 218 kB)
       .bss : 0x80f14760 - 0x80f3ae2c   ( 154 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:256
smp_twd: clock not found -2
thebe_timer_init ...
thebe_of_init: base: f9103000 f9106000
__thebe_clockevents_init: rate:1000000
TIMER: CLOCK_EVT_MODE_ UNUSED SHUTDOWN mode: 1 ctrl: 0x0
TIMER: CLOCK_EVT_MODE_PERIODIC ctrl: 0xe001
sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
Console: colour dummy device 80x30
Calibrating delay loop... 1436.87 BogoMIPS (lpj=7184384)
pid_max: default: 32768 minimum: 501
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Calibrating local timer... 179.94MHz.
TIMER: CLOCK_EVT_MODE_ UNUSED SHUTDOWN mode: 0 ctrl: 0x0
TIMER: CLOCK_EVT_MODE_ UNUSED SHUTDOWN mode: 1 ctrl: 0x0
Setting up static identity map for 0x8033c1e8 - 0x8033c21c
CPU1: Booted secondary processor
CPU2: Booted secondary processor
CPU3: Booted secondary processor
Brought up 4 CPUs
SMP: Total of 4 processors activated (5747.50 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
ramoops: using module parameters
ramoops: attached 0x40000@0xfc700000, ecc: 0/0
L310 cache controller enabled
l2x0: 8 ways, CACHE_ID 0x410000c9, AUX_CTRL 0x32460000, Cache size: 524288 B
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
Serial: AMBA PL011 UART driver
14100000.uart: ttyAMA0 at MMIO 0x14100000 (irq = 36) is a PL011 rev3
console [ttyAMA0] enabled, bootconsole disabled
console [ttyAMA0] enabled, bootconsole disabled
uart-pl011 14180000.uart: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable.
14180000.uart: ttyAMA1 at MMIO 0x14180000 (irq = 37) is a PL011 rev3
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource arm,thebe
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
jffs2: version 2.2. (NAND) ¬ 2001-2006 Red Hat, Inc.
msgmni has been set to 857
io scheduler noop registered (default)
NAND device: Manufacturer ID: 0x01, Chip ID: 0xf1 (AMD/Spansion NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
Scanning device for bad blocks
Creating 4 MTD partitions on "NAND 128MiB 3,3V 8-bit":
0x000000000000-0x000000100000 : "SBL"
0x000000100000-0x000000200000 : "u-boot"
0x000000200000-0x000002200000 : "Kernel"
0x000002200000-0x000008000000 : "JFFS2"
NAND init success
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
GEXP Module Init
xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.3.auto: irq 72, io mem 0x15c00000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.53.cge-rt50 xhci-hcd
usb usb1: SerialNumber: xhci-hcd.3.auto
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.3.auto: set port power, actual port 0:9c8b0420 status  = 0x2a0
xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.53.cge-rt50 xhci-hcd
usb usb2: SerialNumber: xhci-hcd.3.auto
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
xhci-hcd xhci-hcd.3.auto: USB 3 Port POWER on Deliberately Skipped for Acadia!!
xhci-hcd xhci-hcd.3.auto: set port power, actual port 0:9c8b0430 status  = 0x80
usbcore: registered new interface driver usb-storage
oprofile: using arm/armv7-ca9
Netfilter messages via NETLINK v0.30.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
8021q: 802.1Q VLAN Support v1.8
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
Created /proc/rescue
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
### dt-test ### No testcase data in device tree; not running tests
Freeing unused kernel memory: 11004K (8041d000 - 80edc000)
INIT: version 2.88 booting
cp: can't stat '/var/log/wtmp': No such file or directory
Configuring network interfaces... ifconfig: SIOCGIFFLAGS: No such device
ifconfig: SIOCSIFADDR: No such device
INIT: Entering runlevel: 3
grep: /fl0/cimcfg.b: No such file or directory
grep: /fl0/cimcfg.b: No such file or directory
grep: /fl0/config/Association: No such file or directory
grep: /fl0/config/IP: No such file or directory
grep: /fl0/config/LAN: No such file or directory
grep: /fl0/config/MGMT: No such file or directory
grep: /fl0/config/WAC: No such file or directory
grep: /fl0/config/downlink: No such file or directory
grep: /fl0/config/sdl: No such file or directory
grep: /fl0/config/traffic: No such file or directory
grep: /fl0/config/uplink: No such file or directory
All 4 cores are running
chown: unknown user/group brighton:users
chmod: vsat/apps/http/cgi-bin/wifiApi.cgi: No such file or directory
chmod: vsat/apps/http/cgi-bin/wifiApi.cgi: No such file or directory
chmod: vsat/apps/http/cgi-bin/md5.cgi: No such file or directory
chmod: vsat/apps/http/cgi-bin/md5.cgi: No such file or directory
mkdir: can't create directory '/tmp/dyn_http/': File exists
ln: /fl0/light/re/re_firmware.bin: File exists
egrep: /fl0/cimcfg.b: No such file or directory
Loading modules: plusb.ko cavdrv.ko ipc.ko memdev.ko iprekmod.ko satdata.ko iocm.ko thebe_led.ko pepkmod.ko dlk.ko ulp.ko diseqc.ko
egrep: /fl0/cimcfg.b: No such file or directory
ls: /fl0/var/log/wtmp: No such file or directory
sh: 10240: unknown operand
Rotated /fl0/var/log/kern.log, as size exceeded 10K
Programming MPU firmware... Board is Keyed ESN: 12372954
beacon_mon: FactorySerNum=BXND3U70C3,MotherBoardPN=1505812-0103
Begin beacon listening ..
ln: /root/.ssh/ssh: File exists
ln: /cm_data/jupsw/terminal: No such file or directory
ln: /cm_data/direcpc: No such file or directory
ln: /cm_data/pessd: No such file or directory
SBC.SH:Terminal Not Registered
/fl0/logs/diag_0012372954.csv.gz
/fl0/logs/diag_dev_mini1_0012372954.csv.gz
/fl0/logs/diag_mini1_0012372954.csv.gz
Tue Dec  7 00:00:00 UTC 2021
Tue Dec  7 13:35:00 UTC 2021
ls: /fl0/var/log/kpanic_*: No such file or directory
ls: /fl0/var/log/kpep_demsg_*: No such file or directory
ls: /fl0/var/log/dlpktproc_dmesg_*: No such file or directory
ls: /fl0/var/log/satdata_dmesg_*: No such file or directory
Startup
Starting Sysmon ..
mv -f /fl0/var/log/kern.log.0.gz /fl0/var/log/kern.log.1.gz
/vsat has good hash
Starting OpenBSD Secure Shell server: sshd
done.

Poky (Yocto Project Reference Distro) 1.7.2 (none) /dev/console

(none) login:  NO BEACON; Entering Normal Mode
diseqc daemon msg: 00 01 01 e2 70 88 00
diseqc daemon rsp: 07 00 00 00 00 00 00 00
no reply received
grep: /var/run/oduredstate.txt: No such file or directory

--------- Setting up DAC PLL 2 --------

--------- PLL Not Locked --------

--------- PLL Locked --------
_tmu_updt_bypass_rules : result 8228
ifconfig: SIOCSIFADDR: No such device
RTNETLINK answers: No such process
Cannot find device "eth1"
Mgmt Addr update Failed; result = -1
RTNETLINK answers: File exists
Mgmt Addr update Failed; result = -1
jup2_sbc_gen_update: FAP METER DISPLAY ENABLEDGeneral Section parsing & Shared mem update done...37ms
0 parsing satellite EchoStar-19-NAD, config->satNum == 2
Internet Systems Consortium DHCP Server 4.1.1
Copyright 2004-2010 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Wrote 0 leases to leases file.

No subnet declaration for usb0 (no IPv4 addresses).
** Ignoring requests on usb0.  If this is not what
   you want, please write a subnet declaration
   in your dhcpd.conf file for the network segment
   to which interface usb0 is attached. **


No subnet declaration for eth0 (192.168.0.1).
** Ignoring requests on eth0.  If this is not what
   you want, please write a subnet declaration
   in your dhcpd.conf file for the network segment
   to which interface eth0 is attached. **


Not configured to listen on any interfaces!

If you did not get this software from ftp.isc.org, please
get the latest from ftp.isc.org and install that before
requesting help.

If you did get this software from ftp.isc.org and have not
yet read the README, please read it before requesting help.
If you intend to request help from the dhcp-server@isc.org
mailing list, please read the section on the README about
submitting bug reports and requests for help.

Please do not under any circumstances send requests for
help directly to the authors of this software - please
send them to the appropriate mailing list as described in
the README file.

exiting.
find: `/fl0/stats/*wifi_CMD*': No such file or directory
Internet Systems Consortium DHCP Server 4.1.1
Copyright 2004-2010 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Wrote 0 leases to leases file.
Bound to *:547
Listening on Socket/29/eth0/fd0d:edc3:e12a::/64
Sending on   Socket/29/eth0/fd0d:edc3:e12a::/64
!!!EchoStar-19-NAD Parse & shared memory update takes 387 ms
1 parsing satellite EchoStar-17-NAD, config->satNum == 2
2021-12-07 13:35:15: (network.c.283) warning: please use server.use-ipv6 only for hostnames, not without server.bind / empty address; your config will break if the kernel default for IPV6_V6ONLY changes
pcilib: Cannot open /proc/bus/pci
2021-12-07 13:35:15: (network.c.283) warning: please use server.use-ipv6 only for hostnames, not without server.bind / empty address; your config will break if the kernel default for IPV6_V6ONLY changes
2021-12-07 13:35:15: (network.c.283) warning: please use server.use-ipv6 only for hostnames, not without server.bind / empty address; your config will break if the kernel default for IPV6_V6ONLY changes
/tmp/sshd_config /etc/ssh/sshd_config differ: char 481, line 15
Restarting OpenBSD Secure Shell server: sshdstopped /usr/sbin/sshd (pid 1134)
!!!EchoStar-17-NAD Parse & shared memory update takes 462 ms
en-US/
en-US/help_panel.json
es-CO/
es-CO/help_panel.json
nsp_help.html
nsp_logo.gif
pt-BR/
pt-BR/help_panel.json
cp: can't stat '/tmp/dyn_http/favicon.ico': No such file or directory
rm: can't remove '/fl0/sbc_cfg/sbcCfg_info.txt': No such file or directory
Updating the state info file: State: 0 Event: 0 regState:0
Updating the state info file: State: 0 Event: 0 regState:0
sh: can't create /proc/1161/oom_score_adj: nonexistent directory
sh: can't create /proc/1231/oom_score_adj: nonexistent directory
.

 Configuration change signal received
Internet Systems Consortium DHCP Server 4.1.1
Copyright 2004-2010 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Wrote 0 leases to leases file.

No subnet declaration for usb0 (no IPv4 addresses).
** Ignoring requests on usb0.  If this is not what
   you want, please write a subnet declaration
   in your dhcpd.conf file for the network segment
   to which interface usb0 is attached. **


No subnet declaration for eth0 (192.168.0.1).
** Ignoring requests on eth0.  If this is not what
   you want, please write a subnet declaration
   in your dhcpd.conf file for the network segment
   to which interface eth0 is attached. **


Not configured to listen on any interfaces!

If you did not get this software from ftp.isc.org, please
get the latest from ftp.isc.org and install that before
requesting help.

If you did get this software from ftp.isc.org and have not
yet read the README, please read it before requesting help.
If you intend to request help from the dhcp-server@isc.org
mailing list, please read the section on the README about
submitting bug reports and requests for help.

Please do not under any circumstances send requests for
help directly to the authors of this software - please
send them to the appropriate mailing list as described in
the README file.

exiting.
Internet Systems Consortium DHCP Server 4.1.1
Copyright 2004-2010 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Wrote 0 leases to leases file.

No subnet declaration for usb0 (no IPv4 addresses).
** Ignoring requests on usb0.  If this is not what
   you want, please write a subnet declaration
   in your dhcpd.conf file for the network segment
   to which interface usb0 is attached. **


No subnet declaration for eth0 (192.168.0.1).
** Ignoring requests on eth0.  If this is not what
   you want, please write a subnet declaration
   in your dhcpd.conf file for the network segment
   to which interface eth0 is attached. **


Not configured to listen on any interfaces!

If you did not get this software from ftp.isc.org, please
get the latest from ftp.isc.org and install that before
requesting help.

If you did get this software from ftp.isc.org and have not
yet read the README, please read it before requesting help.
If you intend to request help from the dhcp-server@isc.org
mailing list, please read the section on the README about
submitting bug reports and requests for help.

Please do not under any circumstances send requests for
help directly to the authors of this software - please
send them to the appropriate mailing list as described in
the README file.

exiting.

Poky (Yocto Project Reference Distro) 1.7.2 (none) /dev/console

(none) login: