API tools faq
paste
carver_ua

nvtl 5510L dmesg

carver_ua
Jul 20th, 2016
389
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 21.25 KB | None | 0 0
raw download clone embed print report
  1. mifi login: root
  2. Password:
  3.  
  4.  
  5. BusyBox v1.18.5 (2013-12-12 13:47:30 PST) built-in shell (ash)
  6. Enter 'help' for a list of built-in commands.
  7.  
  8. #
  9. # dmesg -c
  10. [ 0.000000] Initializing cgroup subsys cpu
  11. [ 0.000000] Linux version 3.0.21+ (builder@builder-102dt01) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #1 PREEMPT Thu Dec 12 13:02:50 PST 2013
  12. [ 0.000000] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
  13. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  14. [ 0.000000] Machine: QCT MSM9615 CDP
  15. [ 0.000000] Partition (from atag) mibib -- Offset:0 Size:a
  16. [ 0.000000] Partition (from atag) sbl2 -- Offset:a Size:8
  17. [ 0.000000] Partition (from atag) rpm -- Offset:12 Size:8
  18. [ 0.000000] Partition (from atag) dsp3 -- Offset:1a Size:52
  19. [ 0.000000] Partition (from atag) dsp1 -- Offset:6c Size:1b
  20. [ 0.000000] Partition (from atag) dsp2 -- Offset:87 Size:196
  21. [ 0.000000] Partition (from atag) boot -- Offset:21d Size:52
  22. [ 0.000000] Partition (from atag) ua -- Offset:26f Size:5
  23. [ 0.000000] Partition (from atag) ua_backup -- Offset:274 Size:5
  24. [ 0.000000] Partition (from atag) efs2 -- Offset:279 Size:58
  25. [ 0.000000] Partition (from atag) aboot -- Offset:2d1 Size:7
  26. [ 0.000000] Partition (from atag) config -- Offset:2d8 Size:12
  27. [ 0.000000] Partition (from atag) nwboot12 -- Offset:2ea Size:6
  28. [ 0.000000] Partition (from atag) nwdatacache -- Offset:2f0 Size:2
  29. [ 0.000000] Partition (from atag) fotapkg -- Offset:2f2 Size:5f
  30. [ 0.000000] Partition (from atag) system -- Offset:351 Size:4af
  31. [ 0.000000] memory pool 3 (start 47f00000 size 100000) initialized
  32. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  33. [ 0.000000] L310 cache controller enabled
  34. [ 0.000000] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x00540000, Cache size: 262144 B
  35. [ 0.000000] socinfo_init: v6, id=104, ver=2.4, raw_id=1776, raw_ver=1776, hw_plat=1, hw_plat_ver=65536
  36. [ 0.000000] accessory_chip=0 hw_plat_subtype=0
  37. [ 0.000000] On node 0 totalpages: 13824
  38. [ 0.000000] free_area_init_node: node 0, pgdat c05d7668, node_mem_map c0671000
  39. [ 0.000000] Normal zone: 240 pages used for memmap
  40. [ 0.000000] Normal zone: 0 pages reserved
  41. [ 0.000000] Normal zone: 13584 pages, LIFO batch:3
  42. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  43. [ 0.000000] pcpu-alloc: [0] 0
  44. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 13584
  45. [ 0.000000] Kernel command line: noinitrd root=/dev/mtdblock15 rw rootfstype=yaffs2 console=ttyHSL0,115200,n8 androidboot.hardware=qcom androidboot.serialno=1e9bea5a androidboot.baseband=msm
  46. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  47. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  48. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  49. [ 0.000000] Memory: 15MB 39MB = 54MB total
  50. [ 0.000000] Memory: 48148k/48148k available, 8172k reserved, 0K highmem
  51. [ 0.000000] Virtual kernel memory layout:
  52. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  53. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  54. [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  55. [ 0.000000] vmalloc : 0xc8000000 - 0xfa000000 ( 800 MB)
  56. [ 0.000000] lowmem : 0xc0000000 - 0xc7800000 ( 120 MB)
  57. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  58. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  59. [ 0.000000] .init : 0xc0008000 - 0xc0033000 ( 172 kB)
  60. [ 0.000000] .text : 0xc0033000 - 0xc0582c28 (5440 kB)
  61. [ 0.000000] .data : 0xc0584000 - 0xc05e2c18 ( 380 kB)
  62. [ 0.000000] .bss : 0xc05e2c3c - 0xc0670228 ( 566 kB)
  63. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  64. [ 0.000000] Preemptible hierarchical RCU implementation.
  65. [ 0.000000] NR_IRQS:681
  66. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 131084001ms
  67. [ 0.000000] Console: colour dummy device 80x30
  68. [ 0.000274] Calibrating delay loop... 274.02 BogoMIPS (lpj=1370112)
  69. [ 0.070105] pid_max: default: 32768 minimum: 301
  70. [ 0.070715] Mount-cache hash table entries: 512
  71. [ 0.071387] Initializing cgroup subsys debug
  72. [ 0.071417] Initializing cgroup subsys cpuacct
  73. [ 0.071478] Initializing cgroup subsys freezer
  74. [ 0.071539] CPU: Testing write buffer coherency: ok
  75. [ 0.077704] print_constraints: dummy:
  76. [ 0.078071] NET: Registered protocol family 16
  77. [ 0.078223] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  78. [ 0.079017] MiFi Events Module initialized
  79. [ 0.079414] msm_rpm_init: RPM firmware 3.0.16842883
  80. [ 0.079597] unmatched machine ID in register_i2c_devices
  81. [ 0.091988] pm8018_probe: PMIC revision 1: F3
  82. [ 0.092018] pm8018_probe: PMIC revision 2: 08
  83. [ 0.092018] pm8018_probe: PMIC version: PM8018 rev 2.1
  84. [ 0.092049] pm8018_probe: PMIC Restart Reason: Triggered from KPD (power key press)
  85. [ 0.093056] pm_gpio_probe: OK: base=88, ngpio=6
  86. [ 0.093300] pm8xxx_mpp_probe: OK: base=94, ngpio=6
  87. [ 0.099404] cpufreq_table_init: CPU: 4 scaling frequencies supported.
  88. [ 0.099771] msm9615_alaska_init:
  89. [ 0.201190] Succeeded in registering USB HID device
  90. [ 0.203937] sps:REVISION of BAM 0xc8018000 is 0x5.
  91. [ 0.203998] sps:BAM 0x12244000 is registered.
  92. [ 0.204303] sps:sps is ready.
  93. [ 0.220845] bio: create slab <bio-0> at 0
  94. [ 0.221791] ION heap vmalloc created
  95. [ 0.221822] ION heap iommu created
  96. [ 0.221852] ION heap audio created at 47f01000 with size af000
  97. [ 0.222279] pm8xxx_pwm_probe: OK
  98. [ 0.222859] SCSI subsystem initialized
  99. [ 0.224050] usbcore: registered new interface driver usbfs
  100. [ 0.224233] usbcore: registered new interface driver hub
  101. [ 0.224416] usbcore: registered new device driver usb
  102. [ 0.225179] Registered led device: led:halo
  103. [ 0.226705] cfg80211: Calling CRDA to update world regulatory domain
  104. [ 0.226918] Switching to clocksource gp_timer
  105. [ 0.236899] NET: Registered protocol family 2
  106. [ 0.237204] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  107. [ 0.237601] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  108. [ 0.237692] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  109. [ 0.237753] TCP: Hash tables configured (established 2048 bind 2048)
  110. [ 0.237784] TCP reno registered
  111. [ 0.237814] UDP hash table entries: 256 (order: 0, 4096 bytes)
  112. [ 0.237845] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  113. [ 0.238791] NET: Registered protocol family 1
  114. [ 0.243796] Notify: smsm init
  115. [ 0.250297] NET: Registered protocol family 27
  116. [ 0.251945] modem_8960_init: modem fatal driver init'ed.
  117. [ 0.252281] lpass_fatal_init: lpass SSR driver init'ed.
  118. [ 0.252678] msm_rpm_log_probe: OK
  119. [ 0.265405] yaffs: yaffs built Dec 12 2013 12:58:48 Installing.
  120. [ 0.265466] msgmni has been set to 94
  121. [ 0.267877] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  122. [ 0.267907] io scheduler noop registered
  123. [ 0.267907] io scheduler deadline registered
  124. [ 0.267999] io scheduler cfq registered (default)
  125. [ 0.445322] msm_serial: driver initialized
  126. [ 0.445444] msm_serial_hsl: detected port #0
  127. [ 0.445627] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16340000 (irq = 184) is a MSM
  128. [ 0.445719] msm_serial_hsl: console setup on port #0
  129. [ 1.044376] console [ttyHSL0] enabled
  130. [ 1.067633] msm_serial_hsl: driver initialized
  131. [ 1.079414] brd: module loaded
  132. [ 1.085426] loop: module loaded
  133. [ 1.088417] SCSI Media Changer driver v0.25
  134. [ 1.092568] msm_nand_probe: phys addr 0x1b400000
  135. [ 1.096474] msm_nand_probe: dmac 0x3
  136. [ 1.100137] msm_nand_probe: allocated dma buffer at ffdfc000, dma_addr 47996000
  137. [ 1.107553] ONFI probe : Found a nonONFI Compliant device
  138. [ 1.112894] status: c00020
  139. [ 1.115489] nandid: 1900aaec maker ec device aa
  140. [ 1.120036] msm_nand: Found a 2K page device with 128 oobsize - changing oobsize to 64 bytes.
  141. [ 1.128551] msm_nand_scan: flash_rd_reg(chip, MSM_NAND_HW_INFO)=16432
  142. [ 1.134930] Found a supported NAND device
  143. [ 1.138959] NAND Id : 0x1900aaec
  144. [ 1.142224] Buswidth : 8 Bits
  145. [ 1.145185] Density : 256 MByte
  146. [ 1.148390] Pagesize : 2048 Bytes
  147. [ 1.151686] Erasesize: 131072 Bytes
  148. [ 1.155165] Oobsize : 64 Bytes
  149. [ 1.158309] CFG0 Init : 0xa8d408c0
  150. [ 1.161757] CFG1 Init : 0x0004745c
  151. [ 1.165237] ECCBUFCFG : 0x00000203
  152. [ 1.168716] Creating 16 MTD partitions on "msm_nand":
  153. [ 1.173752] 0x000000000000-0x000000140000 : "mibib"
  154. [ 1.179887] 0x000000140000-0x000000240000 : "sbl2"
  155. [ 1.184678] 0x000000240000-0x000000340000 : "rpm"
  156. [ 1.189500] 0x000000340000-0x000000d80000 : "dsp3"
  157. [ 1.194292] 0x000000d80000-0x0000010e0000 : "dsp1"
  158. [ 1.199175] 0x0000010e0000-0x0000043a0000 : "dsp2"
  159. [ 1.203998] 0x0000043a0000-0x000004de0000 : "boot"
  160. [ 1.208911] 0x000004de0000-0x000004e80000 : "ua"
  161. [ 1.213612] 0x000004e80000-0x000004f20000 : "ua_backup"
  162. [ 1.218953] 0x000004f20000-0x000005a20000 : "efs2"
  163. [ 1.223744] 0x000005a20000-0x000005b00000 : "aboot"
  164. [ 1.228719] 0x000005b00000-0x000005d40000 : "config"
  165. [ 1.233725] 0x000005d40000-0x000005e00000 : "nwboot12"
  166. [ 1.238974] 0x000005e00000-0x000005e40000 : "nwdatacache"
  167. [ 1.244437] 0x000005e40000-0x000006a20000 : "fotapkg"
  168. [ 1.249687] 0x000006a20000-0x000010000000 : "system"
  169. [ 1.254967] rmnet_init: BAM devices[8]
  170. [ 1.263360] msm_otg msm_otg: msm_otg probe
  171. [ 1.266473] msm_otg msm_otg: failed to get phy_clk
  172. [ 1.271326] msm_otg msm_otg: OTG regs = c8028000
  173. [ 1.277552] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  174. [ 1.295956] Initializing USB Mass Storage driver...
  175. [ 1.300045] usbcore: registered new interface driver usb-storage
  176. [ 1.305814] USB Mass Storage support registered.
  177. [ 1.310514] usbcore: registered new interface driver ums-alauda
  178. [ 1.316374] usbcore: registered new interface driver ums-cypress
  179. [ 1.322386] usbcore: registered new interface driver ums-datafab
  180. [ 1.328399] usbcore: registered new interface driver ums-freecom
  181. [ 1.334350] usbcore: registered new interface driver ums-isd200
  182. [ 1.340271] usbcore: registered new interface driver ums-jumpshot
  183. [ 1.346314] usbcore: registered new interface driver ums-karma
  184. [ 1.352174] usbcore: registered new interface driver ums-onetouch
  185. [ 1.358248] usbcore: registered new interface driver ums-sddr09
  186. [ 1.364138] usbcore: registered new interface driver ums-sddr55
  187. [ 1.370059] usbcore: registered new interface driver ums-usbat
  188. [ 1.375858] usbcore: registered new interface driver usb_ehset_test
  189. [ 1.382298] msm_otg msm_otg: phy_reset: success
  190. [ 1.387395] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
  191. [ 1.392827] mbim_init: initialize 1 instances
  192. [ 1.397070] mbim_init: Initialized 1 ports
  193. [ 1.404425] android_usb gadget: [composite_bind]: Composite_gadget_bind returned:0
  194. [ 1.411048] android_usb gadget: android_usb ready
  195. [ 1.428292] diagchar initialized now
  196. [ 1.431619] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  197. [ 1.439645] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8018-core/pm8xxx-pwrkey/input/input1
  198. [ 1.449656] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  199. [ 1.455760] i2c /dev entries driver
  200. [ 1.487623] couldn't get usb power supply
  201. [ 1.491011] msm_otg msm_otg: USB in low power mode
  202. [ 1.570517] smb347 0-0015: probe complete
  203. [ 1.574118] pm8xxx_adc_probe: failed to request pa_therm vreg with error -19
  204. [ 1.600854] pm8xxx_tm_probe: OK
  205. [ 1.603998] mmc0: mci-version: 18
  206. [ 1.606378] mmc0: bam physical base=0x12142000
  207. [ 1.610773] mmc0: bam virtual base=0xc8030000
  208. [ 1.615077] sps:BAM 0x12142000 is registered.
  209. [ 1.619258] mmc0: BAM device registered. bam_handle=0xc7304a00
  210. [ 1.625362] sps:REVISION of BAM 0xc8030000 is 0x5.
  211. [ 1.630581] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012142000 irq 129
  212. [ 1.636410] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012140800
  213. [ 1.642331] mmc0: No card detect facilities available
  214. [ 1.648679] mmc0: Qualcomm MSM SDCC-core at 0x0000000012140000 irq 135,0 dma -1 dmacrcri -1
  215. [ 1.656096] mmc0: 8 bit data mode disabled
  216. [ 1.660186] mmc0: 4 bit data mode enabled
  217. [ 1.664092] mmc0: polling status mode disabled
  218. [ 1.668548] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  219. [ 1.674622] mmc0: Slot eject status = 0
  220. [ 1.678010] mmc0: Power save feature enable = 1
  221. [ 1.682496] mmc0: SPS-BAM data transfer mode available
  222. [ 1.693117] register_sysfs sysfs_create_group
  223. [ 1.710666] Netfilter messages via NETLINK v0.30.
  224. [ 1.714512] nf_conntrack version 0.5.0 (752 buckets, 3008 max)
  225. [ 1.721104] ctnetlink v0.93: registering with nfnetlink.
  226. [ 1.725743] IPv4 over IPv4 tunneling driver
  227. [ 1.730840] ip_tables: (C) 2000-2006 Netfilter Core Team
  228. [ 1.735602] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
  229. [ 1.741614] arp_tables: (C) 2002 David S. Miller
  230. [ 1.746284] TCP cubic registered
  231. [ 1.751014] NET: Registered protocol family 10
  232. [ 1.754463] mmc0: queuing unknown CIS tuple 0x01 (3 bytes)
  233. [ 1.763924] Mobile IPv6
  234. [ 1.765420] ip6_tables: (C) 2000-2006 Netfilter Core Team
  235. [ 1.771341] IPv6 over IPv4 tunneling driver
  236. [ 1.777292] NET: Registered protocol family 17
  237. [ 1.781016] Bridge firewalling registered
  238. [ 1.784770] lib80211: common routines for IEEE802.11 drivers
  239. [ 1.790416] lib80211_crypt: registered algorithm 'NULL'
  240. [ 1.790447] lib80211_crypt: registered algorithm 'WEP'
  241. [ 1.790447] lib80211_crypt: registered algorithm 'CCMP'
  242. [ 1.790477] lib80211_crypt: registered algorithm 'TKIP'
  243. [ 1.790508] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
  244. [ 1.798077] Registering SWP/SWPB emulation handler
  245. [ 1.805280] mmc0: queuing unknown CIS tuple 0x1a (5 bytes)
  246. [ 1.811323] clock_late_init() disabled 49 unused clocks
  247. [ 1.817335] sps:BAM 0x124c2000 is registered.
  248. [ 1.824507] MSM Watchdog Initialized
  249. [ 1.827529] no pmic restart interrupt specified
  250. [ 1.832168] mmc0: queuing unknown CIS tuple 0x1b (8 bytes)
  251. [ 1.838089] rtc-pm8xxx rtc-pm8xxx: setting system clock to 1970-01-01 00:00:00 UTC (0)
  252. [ 1.845811] mmc0: queuing unknown CIS tuple 0x14 (0 bytes)
  253. [ 1.850541] yaffs: dev is 32505871 name is "mtdblock15" rw
  254. [ 1.855791] yaffs: passed flags ""
  255. [ 1.859240] yaffs: Attempting MTD mount of 31.15,"mtdblock15"
  256. [ 1.859301] yaffs_internal_read_super: n_blocks=1199 n_reserved_blocks=5
  257. [ 1.867816] mmc0: queuing unknown CIS tuple 0x80 (1 bytes)
  258. [ 1.872455] mmc0: queuing unknown CIS tuple 0x81 (1 bytes)
  259. [ 1.877918] mmc0: queuing unknown CIS tuple 0x82 (1 bytes)
  260. [ 1.883320] mmc0: new high speed SDIO card at address 0001
  261. [ 1.939050] yaffs: yaffs_read_super: is_checkpointed 0
  262. [ 1.939142] VFS: Mounted root (yaffs2 filesystem) on device 31:15.
  263. [ 1.944910] Freeing init memory: 172K
  264. [ 2.089729] ------------[ cut here ]------------
  265. [ 2.093392] WARNING: at arch/arm/mach-msm/clock.c:270 clk_unprepare+0x84/0xf0()
  266. [ 2.100686] ebi1_clk: Don't call unprepare when the clock is enabled
  267. [ 2.106973] Modules linked in:
  268. [ 2.110025] [<c003ef3c>] (unwind_backtrace+0x0/0x128) from [<c007a11c>] (warn_slowpath_common+0x4c/0x64)
  269. [ 2.119548] [<c007a11c>] (warn_slowpath_common+0x4c/0x64) from [<c007a1b4>] (warn_slowpath_fmt+0x2c/0x3c)
  270. [ 2.129070] [<c007a1b4>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0047080>] (clk_unprepare+0x84/0xf0)
  271. [ 2.138013] [<c0047080>] (clk_unprepare+0x84/0xf0) from [<c00470ac>] (clk_unprepare+0xb0/0xf0)
  272. [ 2.146589] [<c00470ac>] (clk_unprepare+0xb0/0xf0) from [<c006c49c>] (msm_bus_fabric_clk_set+0xb8/0x188)
  273. [ 2.156081] [<c006c49c>] (msm_bus_fabric_clk_set+0xb8/0x188) from [<c006c64c>] (msm_bus_fabric_clk_commit+0xe0/0x138)
  274. [ 2.166671] [<c006c64c>] (msm_bus_fabric_clk_commit+0xe0/0x138) from [<c006c768>] (msm_bus_fabric_hw_commit+0xc4/0x118)
  275. [ 2.177414] [<c006c768>] (msm_bus_fabric_hw_commit+0xc4/0x118) from [<c006d0ac>] (msm_bus_commit_fn+0x40/0x50)
  276. [ 2.187425] [<c006d0ac>] (msm_bus_commit_fn+0x40/0x50) from [<c01decac>] (bus_for_each_dev+0x44/0x74)
  277. [ 2.196612] [<c01decac>] (bus_for_each_dev+0x44/0x74) from [<c006db7c>] (msm_bus_scale_client_update_request+0x2a8/0x2f0)
  278. [ 2.207569] [<c006db7c>] (msm_bus_scale_client_update_request+0x2a8/0x2f0) from [<c02c2c8c>] (msmsdcc_msm_bus_work+0x8c/0x148)
  279. [ 2.218922] [<c02c2c8c>] (msmsdcc_msm_bus_work+0x8c/0x148) from [<c008dde8>] (process_one_work+0x208/0x340)
  280. [ 2.228658] [<c008dde8>] (process_one_work+0x208/0x340) from [<c008e3c8>] (worker_thread+0x1dc/0x2f4)
  281. [ 2.237845] [<c008e3c8>] (worker_thread+0x1dc/0x2f4) from [<c0093568>] (kthread+0x84/0x8c)
  282. [ 2.246085] [<c0093568>] (kthread+0x84/0x8c) from [<c003a124>] (kernel_thread_exit+0x0/0x8)
  283. [ 2.254417] ---[ end trace c2a8fad736f94a31 ]---
  284. [ 2.670013] udevd (93): /proc/93/oom_adj is deprecated, please use /proc/93/oom_score_adj instead.
  285. [ 2.678010] udevd version 125 started
  286. [ 4.529345] enable_store: nvtl_android: already disabled
  287. [ 4.599969] functions_store_local: nvtl_android:Cannot enable 'none'
  288. [ 4.605615] functions_store_local: nvtl_android:Cannot enable 'none'
  289. [ 4.927056] yaffs: dev is 32505867 name is "mtdblock11" rw
  290. [ 4.932336] yaffs: passed flags ""
  291. [ 4.935083] yaffs: Attempting MTD mount of 31.11,"mtdblock11"
  292. [ 4.935144] yaffs_internal_read_super: n_blocks=18 n_reserved_blocks=2
  293. [ 4.962124] yaffs: yaffs_read_super: is_checkpointed 0
  294. [ 4.972073] msm_otg msm_otg: USB exited from low power mode
  295. [ 5.648588] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
  296. [ 5.769388] chg_regenerate_event_on_sys_write: Booted with charger, setting NVItem values
  297. [ 5.776590] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
  298. [ 5.783152] android_work: nvtl_android: did not send uevent (0 0 (null))
  299. [ 5.815534] chg_regenerate_event_on_sys_write: Booted with charger, setting NVItem values
  300. [ 5.844773] chg_regenerate_event_on_sys_write: Booted with charger, setting NVItem values
  301. [ 5.873706] chg_regenerate_event_on_sys_write: Booted with charger, setting NVItem values
  302. [ 5.898489] chg_regenerate_event_on_sys_write: Booted with charger, setting NVItem values
  303. [ 5.951838] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
  304. [ 6.204608] android_usb gadget: high speed config #1: android
  305. [ 6.209369] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
  306. [ 6.215687] msm_otg msm_otg: Avail curr from USB = 500
  307. [ 6.343293] chg_regenerate_event_on_sys_write: Booted with charger, setting NVItem values
  308. [ 6.821303] functions_store_local: nvtl_android:Cannot enable 'none'
  309. [ 6.826888] functions_store_local: nvtl_android:Cannot enable 'none'
  310. [ 6.837753] ecm_function_bind_config: nvtl_android: SysfsMACAddr=00:15:FF:05:37:30
  311. [ 6.847825] android_usb gadget: using random self ethernet address
  312. [ 6.853471] android_usb gadget: using random host ethernet address
  313. [ 6.863116] usb0: MAC 6a:d0:b6:e4:4b:36
  314. [ 6.865924] usb0: HOST MAC e2:b1:0a:e7:c9:6c
  315. [ 6.873767] ecm_function_bind_config: nvtl_android: MAC=00:15:FF:05:37:30
  316. [ 6.896566] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
  317. [ 6.901907] msm_otg msm_otg: Avail curr from USB = 2
  318. [ 6.906851] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received
  319. [ 6.914603] msm_otg msm_otg: USB in low power mode
  320. [ 7.011017] ADDRCONF(NETDEV_UP): usb0: link is not ready
  321. [ 8.273462] msm_otg msm_otg: USB exited from low power mode
  322. [ 8.278071] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
  323. [ 8.284358] msm_otg msm_otg: Avail curr from USB = 0
  324. [ 8.453715] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
  325. [ 8.467053] AR6000: configuration opcode 7 is only used for RTOS systems, not Linux systemsCompleted loading the module ar6000_avail_ev
  326. [ 8.662261] android_usb gadget: high speed config #1: android
  327. [ 8.667114] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
  328. [ 8.673309] msm_otg msm_otg: Avail curr from USB = 500
  329. [ 8.678712] diag: USB connected
  330. [ 8.977506] ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
  331. [ 9.570090] AR6K: targetconf_ver : 1
  332. [ 9.810773] AR6K: set passive pwr mode = 2
  333. [ 9.976499] ADDRCONF(NETDEV_UP): wlan1: link is not ready
  334. [ 10.878010] device usb0 entered promiscuous mode
  335. [ 10.882466] br0: port 1(usb0) entering forwarding state
  336. [ 10.886830] br0: port 1(usb0) entering forwarding state
  337. [ 11.004730] device wlan1 entered promiscuous mode
  338. [ 11.017610] br0: port 1(usb0) entering forwarding state
  339. [ 11.030032] br0: port 1(usb0) entering forwarding state
  340. [ 11.034274] br0: port 1(usb0) entering forwarding state
  341. [ 11.353151] br0: port 2(wlan1) entering disabled state
  342. [ 11.467175] ADDRCONF(NETDEV_UP): wlan1: link is not ready
  343. [ 11.608454] process `router_setup.sh' is using deprecated sysctl (syscall) net.ipv6.neigh.default.base_reachable_time; Use net.ipv6.neigh.default.base_reachable_time_ms instead.
  344. [ 12.451915] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
  345. [ 12.459667] br0: port 2(wlan1) entering forwarding state
  346. [ 12.463940] br0: port 2(wlan1) entering forwarding state
  347. [ 19.088295] usb0: no IPv6 routers present
  348. [ 22.838303] wlan1: no IPv6 routers present
  349. #
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!