API tools faq
paste
Advertisement
Pteridium

Untitled

Pteridium
Aug 15th, 2013
140
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 24.81 KB | None | 0 0
raw download clone embed print report
  1. Updated from CFE web.
  2.  
  3. web info: Waiting for connection on socket 0.
  4. web info: Waiting for connection on socket 1.
  5. web info: Waiting for connection on socket 0.
  6. web info: Waiting for connection on socket 1.
  7. web info: Upload 4784132 bytes, Broadcom image format.
  8. CFE>
  9. Flashing root file system and kernel at 0xb8010000: ..........................................................................
  10.  
  11. .
  12. *** Image flash done *** !
  13.  
  14. Resetting board...�
  15.  
  16. CFE version 1.0.37-105.22-1 for BCM96368 (32bit,SP,BE)
  17. Build Date: Fri Mar 19 11:53:33 CST 2010 (jojopo@broadcom_v060.comtrend.com)
  18. Copyright (C) 2000-2009 Broadcom Corporation.
  19.  
  20. Parallel flash device: name AM29DL800B, id 0x22cb size 8192KB
  21. Total Flash size: 8192K with 135 sectors
  22. Chip ID: BCM6368B2, MIPS: 400MHz
  23. Main Thread: TP0
  24. Total Memory: 67108864 bytes (64MB)
  25. Boot Address: 0xb8000000
  26.  
  27. Board IP address : 192.168.1.1:ffffff00
  28. Host IP address : 192.168.1.100
  29. Gateway IP address :
  30. Run from flash/host (f/h) : f
  31. Default host run file name : vmlinux
  32. Default host flash file name : bcm963xx_fs_kernel
  33. Boot delay (0-9 seconds) : 1
  34. Board Id (0-14) : 96368M-1341N
  35. Number of MAC Addresses (1-32) : 11
  36. Base MAC Address : 64:68:0c:
  37. PSI Size (1-64) KBytes : 24
  38. Enable Backup PSI [0|1] : 0
  39. System Log Size (0-256) KBytes : 0
  40. Main Thread Number [0|1] : 0
  41.  
  42. *** Press any key to stop auto run (1 seconds) ***
  43. Auto run second count down: 0
  44. Booting from only image (0xb8010000) ...
  45. Code Address: 0x80010000, Entry Address: 0x80010000
  46. LZMA: Prossible old LZMA format, trying to decompress..
  47. Decompression OK!
  48. Entry at 0x80010000
  49. Closing network.
  50. Disabling Switch ports.
  51. Flushing Receive Buffers...
  52. 5 buffers found.
  53. Closing DMA Channels.
  54. Starting program at 0x80010000
  55. [ 0.000000] Linux version 3.8.11 (pepe@debian) (gcc version 4.7.3 (OpenWrt/Linaro GCC 4.7-2013.03 r36529) ) #2 SMP Thu Aug3
  56. [ 0.000000] Detected Broadcom 0x6368 CPU revision b2
  57. [ 0.000000] CPU frequency is 400 MHz
  58. [ 0.000000] 64MB of RAM installed
  59. [ 0.000000] registering 38 GPIOs
  60. [ 0.000000] board_bcm963xx: Boot address 0xb8000000
  61. [ 0.000000] board_bcm963xx: CFE version: 1.0.37-105.22
  62. [ 0.000000] bootconsole [early0] enabled
  63. [ 0.000000] CPU revision is: 0002a031 (Broadcom BMIPS4350)
  64. [ 0.000000] board_bcm963xx: board name: 96368M-1341N
  65. [ 0.000000] Determined physical RAM map:
  66. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  67. [ 0.000000] Initrd not found or empty - disabling initrd
  68. [ 0.000000] Zone ranges:
  69. [ 0.000000] Normal [mem 0x00000000-0x03ffffff]
  70. [ 0.000000] Movable zone start for each node
  71. [ 0.000000] Early memory node ranges
  72. [ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
  73. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
  74. [ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  75. [ 0.000000] PERCPU: Embedded 7 pages/cpu @81083000 s6080 r8192 d14400 u32768
  76. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  77. [ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
  78. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  79. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  80. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  81. [ 0.000000] __ex_table already sorted, skipping sort
  82. [ 0.000000] Memory: 61116k/65536k available (2620k kernel code, 4420k reserved, 620k data, 212k init, 0k highmem)
  83. [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  84. [ 0.000000] Hierarchical RCU implementation.
  85. [ 0.000000] NR_IRQS:128
  86. [ 0.000000] Calibrating delay loop... 397.82 BogoMIPS (lpj=795648)
  87. [ 0.032000] pid_max: default: 32768 minimum: 301
  88. [ 0.036000] Mount-cache hash table entries: 512
  89. [ 0.044000] SMP: Booting CPU1...
  90. [ 0.048000] CPU revision is: 0002a031 (Broadcom BMIPS4350)
  91. [ 0.048000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
  92. [ 0.048000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  93. [ 0.076000] SMP: CPU1 is running
  94. [ 0.076000] Brought up 2 CPUs
  95. [ 0.084000] NET: Registered protocol family 16
  96. [ 0.096000] registering PCI controller with io_map_base unset
  97. [ 0.116000] bio: create slab <bio-0> at 0
  98. [ 0.120000] PCI host bridge to bus 0000:00
  99. [ 0.124000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
  100. [ 0.128000] pci_bus 0000:00: root bus resource [io 0x8000000-0x800ffff]
  101. [ 0.132000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  102. [ 0.148000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x3000ffff]
  103. [ 0.152000] Switching to clocksource MIPS
  104. [ 0.160000] NET: Registered protocol family 2
  105. [ 0.168000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
  106. [ 0.176000] TCP bind hash table entries: 512 (order: 0, 4096 bytes)
  107. [ 0.180000] TCP: Hash tables configured (established 512 bind 512)
  108. [ 0.188000] TCP: reno registered
  109. [ 0.192000] UDP hash table entries: 256 (order: 1, 8192 bytes)
  110. [ 0.196000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  111. [ 0.204000] NET: Registered protocol family 1
  112. [ 0.212000] audit: initializing netlink socket (disabled)
  113. [ 0.216000] type=2000 audit(0.216:1): initialized
  114. [ 0.240000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  115. [ 0.248000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  116. [ 0.260000] msgmni has been set to 119
  117. [ 0.264000] io scheduler noop registered
  118. [ 0.268000] io scheduler deadline registered (default)
  119. [ 0.276000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 10) is a bcm63xx_uart
  120. [ 0.284000] console [ttyS0] enabled, bootconsole disabled
  121. [ 0.284000] console [ttyS0] enabled, bootconsole disabled
  122. [ 0.296000] bcm63xx-rng bcm63xx-rng: registered RNG driver
  123. [ 0.304000] physmap platform flash device: 08000000 at 18000000
  124. [ 0.312000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022cb
  125. [ 0.320000] Amd/Fujitsu Extended Query Table at 0x0040
  126. [ 0.328000] Amd/Fujitsu Extended Query version 1.1.
  127. [ 0.332000] number of CFI chips: 1
  128. [ 0.336000] bcm63xxpart: CFE boot tag found with version 6 and board type 96368M-1341N
  129. [ 0.344000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
  130. [ 0.352000] bcm63xxpart: Partition 1 is kernel offset 10100 and length 12ff00
  131. [ 0.356000] bcm63xxpart: Partition 2 is rootfs offset 140000 and length 6b0000
  132. [ 0.364000] bcm63xxpart: Partition 3 is nvram offset 7f0000 and length 10000
  133. [ 0.372000] bcm63xxpart: Partition 4 is linux offset 10000 and length 7e0000
  134. [ 0.380000] bcm63xxpart: Spare partition is offset 4a0004 and length 34fffc
  135. [ 0.388000] 5 bcm63xxpart partitions found on MTD device physmap-flash.0
  136. [ 0.392000] Creating 5 MTD partitions on "physmap-flash.0":
  137. [ 0.400000] 0x000000000000-0x000000010000 : "CFE"
  138. [ 0.408000] 0x000000010100-0x000000140000 : "kernel"
  139. [ 0.412000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- y
  140. [ 0.428000] 0x000000140000-0x0000007f0000 : "rootfs"
  141. [ 0.436000] mtd: partition "rootfs" set to be root filesystem
  142. [ 0.440000] mtd: partition "rootfs_data" created automatically, ofs=4A0000, len=350000
  143. [ 0.448000] 0x0000004a0000-0x0000007f0000 : "rootfs_data"
  144. [ 0.456000] 0x0000007f0000-0x000000800000 : "nvram"
  145. [ 0.464000] 0x000000010000-0x0000007f0000 : "linux"
  146. [ 0.472000] bcm63xx-spi bcm63xx-spi: at 0xb0000800 (irq 9, FIFOs size 542)
  147. [ 0.520000] b53_common: found switch: BCM63xx, rev 0
  148. [ 0.528000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
  149. [ 0.536000] TCP: cubic registered
  150. [ 0.540000] NET: Registered protocol family 17
  151. [ 0.544000] 8021q: 802.1Q VLAN Support v1.8
  152. [ 0.556000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  153. [ 0.568000] Freeing unused kernel memory: 212k freed
  154. procd: Console is alive
  155. procd: - preinit -
  156. ifconfig: SIOCGIFFLAGS: No such device
  157. Press the [f] key and hit [enter] to enter failsafe mode
  158. mount_root: jffs2 is not ready - marker found
  159. /etc/preinit: line 1: check_skip: not found
  160. /etc/preinit: line 1: check_skip: not found
  161. /etc/preinit: line 1: check_skip: not found
  162. ifconfig: SIOCGIFFLAGS: No such device
  163. procd: - early -
  164. procd: - watchdog -
  165. procd: - init -
  166. Please press Enter to activate this console.
  167. [ 9.584000] compat-drivers backport release: compat-drivers-2013-03-28-5
  168. [ 9.592000] Backport based on wireless-testing.git master-2013-04-16
  169. [ 9.596000] compat.git: wireless-testing.git
  170. [ 9.636000] cfg80211: Calling CRDA to update world regulatory domain
  171. [ 9.648000] cfg80211: World regulatory domain updated:
  172. [ 9.652000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  173. [ 9.660000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  174. [ 9.668000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  175. [ 9.676000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  176. [ 9.684000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  177. [ 9.692000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  178. [ 9.936000] SCSI subsystem initialized
  179. [ 10.192000] usbcore: registered new interface driver usbfs
  180. [ 10.196000] usbcore: registered new interface driver hub
  181. [ 10.204000] usbcore: registered new device driver usb
  182. [ 11.080000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
  183. [ 12.664000] cfg80211: Calling CRDA for country: AW
  184. [ 12.668000] cfg80211: Regulatory domain changed to country: AW
  185. [ 12.676000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  186. [ 12.684000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  187. [ 12.692000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  188. [ 12.700000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  189. [ 12.708000] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
  190. [ 12.716000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xc02c0000, irq=21
  191. [ 12.728000] Button Hotplug driver version 0.4.1
  192. [ 13.440000] PPP generic driver version 2.4.2
  193. [ 13.840000] ip_tables: (C) 2000-2006 Netfilter Core Team
  194. [ 14.088000] NET: Registered protocol family 24
  195. [ 14.112000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  196. [ 14.120000] ehci-platform: EHCI generic platform driver
  197. [ 14.228000] ehci-platform ehci-platform: EHCI Host Controller
  198. [ 14.232000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  199. [ 14.240000] ehci-platform ehci-platform: irq 15, io mem 0xb0001500
  200. [ 14.260000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurrent ignored
  201. [ 14.268000] hub 1-0:1.0: USB hub found
  202. [ 14.272000] hub 1-0:1.0: 2 ports detected
  203. [ 14.412000] nf_conntrack version 0.5.0 (958 buckets, 3832 max)
  204. [ 15.460000] Initializing USB Mass Storage driver...
  205. [ 15.464000] usbcore: registered new interface driver usb-storage
  206. [ 15.472000] USB Mass Storage support registered.
  207. [ 15.584000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
  208. [ 29.044000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
  209. [ 29.052000] jffs2_build_filesystem(): unlocking the mtd device... done.
  210. [ 29.060000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
  211. [ 57.264000] jffs2: notice: (810) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked,.
  212. procd: - init complete -
  213. re^H^H^H
  214.  
  215.  
  216. BusyBox v1.19.4 (2013-08-15 18:19:47 CEST) built-in shell (ash)
  217. Enter 'help' for a list of built-in commands.
  218.  
  219. _______ ________ __
  220. | |.-----.-----.-----.| | | |.----.| |_
  221. | - || _ | -__| || | | || _|| _|
  222. |_______|| __|_____|__|__||________||__| |____|
  223. |__| W I R E L E S S F R E E D O M�---------------------------------------
  224. BARRIER BREAKER (Bleeding Edge, r36529)
  225. -----------------------------------------------------
  226. * 1/2 oz Galliano Pour all ingredients into
  227. * 4 oz cold Coffee an irish coffee mug filled
  228. * 1 1/2 oz Dark Rum with crushed ice. Stir.
  229. * 2 tsp. Creme de Cacao
  230. -----------------------------------------------------
  231. root@OpenWrt:/# reboot
  232. procd: - shutdown -
  233. root@OpenWrt:/# procd: - reboot -
  234. procd says good bye !
  235. [ 204.912000] Restarting system.
  236. [ 204.912000] triggering watchdog soft-reset...
  237.  
  238. CFE version 1.0.37-105.22-1 for BCM96368 (32bit,SP,BE)
  239. Build Date: Fri Mar 19 11:53:33 CST 2010 (jojopo@broadcom_v060.comtrend.com)
  240. Copyright (C) 2000-2009 Broadcom Corporation.
  241.  
  242. Parallel flash device: name AM29DL800B, id 0x22cb size 8192KB
  243. Total Flash size: 8192K with 135 sectors
  244. Chip ID: BCM6368B2, MIPS: 400MHz
  245. Main Thread: TP0
  246. Total Memory: 67108864 bytes (64MB)
  247. Boot Address: 0xb8000000
  248.  
  249. Board IP address : 192.168.1.1:ffffff00
  250. Host IP address : 192.168.1.100
  251. Gateway IP address :
  252. Run from flash/host (f/h) : f
  253. Default host run file name : vmlinux
  254. Default host flash file name : bcm963xx_fs_kernel
  255. Boot delay (0-9 seconds) : 1
  256. Board Id (0-14) : 96368M-1341N
  257. Number of MAC Addresses (1-32) : 11
  258. Base MAC Address : 64:68:0c:
  259. PSI Size (1-64) KBytes : 24
  260. Enable Backup PSI [0|1] : 0
  261. System Log Size (0-256) KBytes : 0
  262. Main Thread Number [0|1] : 0
  263.  
  264. *** Press any key to stop auto run (1 seconds) ***
  265. Auto run second count down: 0
  266. Booting from only image (0xb8010000) ...
  267. Code Address: 0x80010000, Entry Address: 0x80010000
  268. LZMA: Prossible old LZMA format, trying to decompress..
  269. Decompression OK!
  270. Entry at 0x80010000
  271. Closing network.
  272. Disabling Switch ports.
  273. Flushing Receive Buffers...
  274. 6 buffers found.
  275. Closing DMA Channels.
  276. Starting program at 0x80010000
  277. [ 0.000000] Linux version 3.8.11 (pepe@debian) (gcc version 4.7.3 (OpenWrt/Linaro GCC 4.7-2013.03 r36529) ) #2 SMP Thu Aug3
  278. [ 0.000000] Detected Broadcom 0x6368 CPU revision b2
  279. [ 0.000000] CPU frequency is 400 MHz
  280. [ 0.000000] 64MB of RAM installed
  281. [ 0.000000] registering 38 GPIOs
  282. [ 0.000000] board_bcm963xx: Boot address 0xb8000000
  283. [ 0.000000] board_bcm963xx: CFE version: 1.0.37-105.22
  284. [ 0.000000] bootconsole [early0] enabled
  285. [ 0.000000] CPU revision is: 0002a031 (Broadcom BMIPS4350)
  286. [ 0.000000] board_bcm963xx: board name: 96368M-1341N
  287. [ 0.000000] Determined physical RAM map:
  288. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  289. [ 0.000000] Initrd not found or empty - disabling initrd
  290. [ 0.000000] Zone ranges:
  291. [ 0.000000] Normal [mem 0x00000000-0x03ffffff]
  292. [ 0.000000] Movable zone start for each node
  293. [ 0.000000] Early memory node ranges
  294. [ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
  295. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
  296. [ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  297. [ 0.000000] PERCPU: Embedded 7 pages/cpu @81083000 s6080 r8192 d14400 u32768
  298. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  299. [ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
  300. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  301. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  302. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  303. [ 0.000000] __ex_table already sorted, skipping sort
  304. [ 0.000000] Memory: 61116k/65536k available (2620k kernel code, 4420k reserved, 620k data, 212k init, 0k highmem)
  305. [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  306. [ 0.000000] Hierarchical RCU implementation.
  307. [ 0.000000] NR_IRQS:128
  308. [ 0.000000] Calibrating delay loop... 397.82 BogoMIPS (lpj=795648)
  309. [ 0.032000] pid_max: default: 32768 minimum: 301
  310. [ 0.036000] Mount-cache hash table entries: 512
  311. [ 0.044000] SMP: Booting CPU1...
  312. [ 0.048000] CPU revision is: 0002a031 (Broadcom BMIPS4350)
  313. [ 0.048000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
  314. [ 0.048000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  315. [ 0.076000] SMP: CPU1 is running
  316. [ 0.076000] Brought up 2 CPUs
  317. [ 0.084000] NET: Registered protocol family 16
  318. [ 0.096000] registering PCI controller with io_map_base unset
  319. [ 0.116000] bio: create slab <bio-0> at 0
  320. [ 0.120000] PCI host bridge to bus 0000:00
  321. [ 0.124000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
  322. [ 0.128000] pci_bus 0000:00: root bus resource [io 0x8000000-0x800ffff]
  323. [ 0.132000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  324. [ 0.148000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x3000ffff]
  325. [ 0.152000] Switching to clocksource MIPS
  326. [ 0.160000] NET: Registered protocol family 2
  327. [ 0.168000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
  328. [ 0.176000] TCP bind hash table entries: 512 (order: 0, 4096 bytes)
  329. [ 0.180000] TCP: Hash tables configured (established 512 bind 512)
  330. [ 0.188000] TCP: reno registered
  331. [ 0.192000] UDP hash table entries: 256 (order: 1, 8192 bytes)
  332. [ 0.196000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  333. [ 0.204000] NET: Registered protocol family 1
  334. [ 0.212000] audit: initializing netlink socket (disabled)
  335. [ 0.216000] type=2000 audit(0.216:1): initialized
  336. [ 0.244000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  337. [ 0.248000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  338. [ 0.260000] msgmni has been set to 119
  339. [ 0.264000] io scheduler noop registered
  340. [ 0.268000] io scheduler deadline registered (default)
  341. �[ 0.284000] console [ttyS0] enabled, bootconsole disabled= 10) is a bcm63xx_uart
  342. [ 0.284000] console [ttyS0] enabled, bootconsole disabled
  343. [ 0.296000] bcm63xx-rng bcm63xx-rng: registered RNG driver
  344. [ 0.304000] physmap platform flash device: 08000000 at 18000000
  345. [ 0.312000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022cb
  346. [ 0.324000] Amd/Fujitsu Extended Query Table at 0x0040
  347. [ 0.328000] Amd/Fujitsu Extended Query version 1.1.
  348. [ 0.332000] number of CFI chips: 1
  349. [ 0.336000] bcm63xxpart: CFE boot tag found with version 6 and board type 96368M-1341N
  350. [ 0.344000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
  351. [ 0.352000] bcm63xxpart: Partition 1 is kernel offset 10100 and length 12ff00
  352. [ 0.360000] bcm63xxpart: Partition 2 is rootfs offset 140000 and length 6b0000
  353. [ 0.368000] bcm63xxpart: Partition 3 is nvram offset 7f0000 and length 10000
  354. [ 0.372000] bcm63xxpart: Partition 4 is linux offset 10000 and length 7e0000
  355. [ 0.380000] bcm63xxpart: Spare partition is offset 4a0004 and length 34fffc
  356. [ 0.388000] 5 bcm63xxpart partitions found on MTD device physmap-flash.0
  357. [ 0.396000] Creating 5 MTD partitions on "physmap-flash.0":
  358. [ 0.400000] 0x000000000000-0x000000010000 : "CFE"
  359. [ 0.408000] 0x000000010100-0x000000140000 : "kernel"
  360. [ 0.412000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- y
  361. [ 0.428000] 0x000000140000-0x0000007f0000 : "rootfs"
  362. [ 0.436000] mtd: partition "rootfs" set to be root filesystem
  363. [ 0.440000] mtd: partition "rootfs_data" created automatically, ofs=4A0000, len=350000
  364. [ 0.452000] 0x0000004a0000-0x0000007f0000 : "rootfs_data"
  365. [ 0.460000] 0x0000007f0000-0x000000800000 : "nvram"
  366. [ 0.464000] 0x000000010000-0x0000007f0000 : "linux"
  367. [ 0.476000] bcm63xx-spi bcm63xx-spi: at 0xb0000800 (irq 9, FIFOs size 542)
  368. [ 0.520000] b53_common: found switch: BCM63xx, rev 0
  369. [ 0.524000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
  370. [ 0.536000] TCP: cubic registered
  371. [ 0.540000] NET: Registered protocol family 17
  372. [ 0.544000] 8021q: 802.1Q VLAN Support v1.8
  373. [ 0.556000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  374. [ 0.568000] Freeing unused kernel memory: 212k freed
  375. procd: Console is alive
  376. procd: - preinit -
  377. ifconfig: SIOCGIFFLAGS: No such device
  378. Press the [f] key and hit [enter] to enter failsafe mode
  379. mount_root: jffs2 is ready
  380. [ 5.320000] jffs2: notice: (257) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked,.
  381. /etc/preinit: line 1: check_skip: not found
  382. /etc/preinit: line 1: check_skip: not found
  383. /etc/preinit: line 1: check_skip: not found
  384. ifconfig: SIOCGIFFLAGS: No such device
  385. procd: - early -
  386. procd: - watchdog -
  387. procd: - init -
  388. Please press Enter to activate this console.
  389. [ 9.628000] compat-drivers backport release: compat-drivers-2013-03-28-5
  390. [ 9.636000] Backport based on wireless-testing.git master-2013-04-16
  391. [ 9.644000] compat.git: wireless-testing.git
  392. [ 9.664000] cfg80211: Calling CRDA to update world regulatory domain
  393. [ 9.676000] cfg80211: World regulatory domain updated:
  394. [ 9.680000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  395. [ 9.692000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  396. [ 9.700000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  397. [ 9.708000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  398. [ 9.716000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  399. [ 9.720000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  400. [ 9.948000] SCSI subsystem initialized
  401. [ 10.192000] usbcore: registered new interface driver usbfs
  402. [ 10.200000] usbcore: registered new interface driver hub
  403. [ 10.204000] usbcore: registered new device driver usb
  404. [ 11.056000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
  405. [ 12.644000] cfg80211: Calling CRDA for country: AW
  406. [ 12.652000] cfg80211: Regulatory domain changed to country: AW
  407. [ 12.656000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  408. [ 12.664000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  409. [ 12.672000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  410. [ 12.680000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  411. [ 12.688000] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
  412. [ 12.696000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xc0360000, irq=21
  413. [ 12.712000] Button Hotplug driver version 0.4.1
  414. [ 13.464000] PPP generic driver version 2.4.2
  415. [ 13.880000] ip_tables: (C) 2000-2006 Netfilter Core Team
  416. [ 14.120000] NET: Registered protocol family 24
  417. [ 14.136000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  418. [ 14.144000] ehci-platform: EHCI generic platform driver
  419. [ 14.252000] ehci-platform ehci-platform: EHCI Host Controller
  420. [ 14.256000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  421. [ 14.264000] ehci-platform ehci-platform: irq 15, io mem 0xb0001500
  422. [ 14.284000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurrent ignored
  423. [ 14.292000] hub 1-0:1.0: USB hub found
  424. [ 14.296000] hub 1-0:1.0: 2 ports detected
  425. [ 14.428000] nf_conntrack version 0.5.0 (958 buckets, 3832 max)
  426. [ 15.476000] Initializing USB Mass Storage driver...
  427. [ 15.480000] usbcore: registered new interface driver usb-storage
  428. [ 15.488000] USB Mass Storage support registered.
  429. [ 15.600000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
  430. procd: - init complete -
  431.  
  432.  
  433.  
  434. BusyBox v1.19.4 (2013-08-15 18:19:47 CEST) built-in shell (ash)
  435. Enter 'help' for a list of built-in commands.
  436.  
  437. _______ ________ __
  438. | |.-----.-----.-----.| | | |.----.| |_
  439. | - || _ | -__| || | | || _|| _|
  440. |_______|| __|_____|__|__||________||__| |____|
  441. |__| W I R E L E S S F R E E D O M
  442. -kjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj��(*�RQ� BREAKER (Bleeding Edge, r36529)
  443. -----------------------------------------------------
  444. * 1/2 oz Galliano Pour all ingredients into
  445. * 4 oz cold Coffee an irish coffee mug filled
  446. * 1 1/2 oz Dark Rum with crushed ice. Stir.
  447. * 2 tsp. Creme de Cacao
  448. -----------------------------------------------------
  449. root@OpenWrt:/# ls /etc/config
  450. ddns dropbear fstab network ucitrack wireless
  451. dhcp firewall luci system uhttpd
  452. root@OpenWrt:/#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!