Bullet64

9230 Readtest

Feb 2nd, 2019
185
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. rock64@rockpro64v_2_1:~$ dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  3. [ 0.000000] Linux version 4.20.0-1083-ayufan-g686e1f1aa461 (root@runner-f725ff63-project-6422644-concurrent-0) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3)) #ayufan SMP PREEMPT Sun Dec 30 13:42:26 UTC 2018
  4. [ 0.000000] Machine model: Pine64 RockPro64
  5. [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
  6. [ 0.000000] printk: bootconsole [uart8250] enabled
  7. [ 0.000000] efi: Getting EFI parameters from FDT:
  8. [ 0.000000] efi: UEFI not found.
  9. [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000
  10. [ 0.000000] NUMA: No NUMA configuration found
  11. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x000000007fffffff]
  12. [ 0.000000] NUMA: NODE_DATA [mem 0x7efa4840-0x7efa5fff]
  13. [ 0.000000] Zone ranges:
  14. [ 0.000000] DMA32 [mem 0x0000000000200000-0x000000007fffffff]
  15. [ 0.000000] Normal empty
  16. [ 0.000000] Movable zone start for each node
  17. [ 0.000000] Early memory node ranges
  18. [ 0.000000] node 0: [mem 0x0000000000200000-0x000000007fffffff]
  19. [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
  20. [ 0.000000] On node 0 totalpages: 523776
  21. [ 0.000000] DMA32 zone: 8184 pages used for memmap
  22. [ 0.000000] DMA32 zone: 0 pages reserved
  23. [ 0.000000] DMA32 zone: 523776 pages, LIFO batch:63
  24. [ 0.000000] psci: probing for conduit method from DT.
  25. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  26. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  27. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  28. [ 0.000000] psci: SMC Calling Convention v1.0
  29. [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 with crng_init=0
  30. [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s55896 r8192 d30120 u94208
  31. [ 0.000000] pcpu-alloc: s55896 r8192 d30120 u94208 alloc=23*4096
  32. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
  33. [ 0.000000] Detected VIPT I-cache on CPU0
  34. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  35. [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  36. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
  37. [ 0.000000] Policy zone: DMA32
  38. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=1e:0e:99:52:8e:40 eth1addr= serial=15a3d3571288b28 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4
  39. [ 0.000000] Memory: 2006564K/2095104K available (18044K kernel code, 1896K rwdata, 7376K rodata, 1536K init, 480K bss, 72156K reserved, 16384K cma-reserved)
  40. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  41. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  42. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
  43. [ 0.000000] Tasks RCU enabled.
  44. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  45. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  46. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  47. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  48. [ 0.000000] GICv3: Distributor has no Range Selector support
  49. [ 0.000000] GICv3: no VLPI support, no direct LPI support
  50. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
  51. [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
  52. [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @7e880000 (flat, esz 8, psz 64K, shr 0)
  53. [ 0.000000] ITS: using cache flushing for cmd queue
  54. [ 0.000000] GICv3: using LPI property table @0x000000007e840000
  55. [ 0.000000] GIC: using cache flushing for LPI property table
  56. [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000007e850000
  57. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
  58. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
  59. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  60. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  61. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  62. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  63. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  64. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  65. [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  66. [ 0.002917] Console: colour dummy device 80x25
  67. [ 0.003341] printk: console [tty0] enabled
  68. [ 0.003738] printk: bootconsole [uart8250] disabled
  69. [ 0.004308] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  70. [ 0.004342] pid_max: default: 32768 minimum: 301
  71. [ 0.004478] LSM: Security Framework initializing
  72. [ 0.005538] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  73. [ 0.006081] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  74. [ 0.006150] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  75. [ 0.006190] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  76. [ 0.030987] ASID allocator initialised with 32768 entries
  77. [ 0.038985] rcu: Hierarchical SRCU implementation.
  78. [ 0.047114] Platform MSI: interrupt-controller@fee20000 domain created
  79. [ 0.047535] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  80. [ 0.051991] EFI services will not be available.
  81. [ 0.059892] smp: Bringing up secondary CPUs ...
  82. [ 0.092105] Detected VIPT I-cache on CPU1
  83. [ 0.092142] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
  84. [ 0.092158] GICv3: CPU1: using allocated LPI pending table @0x000000007e860000
  85. [ 0.092203] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  86. [ 0.124188] Detected VIPT I-cache on CPU2
  87. [ 0.124217] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
  88. [ 0.124229] GICv3: CPU2: using allocated LPI pending table @0x000000007e870000
  89. [ 0.124260] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  90. [ 0.156284] Detected VIPT I-cache on CPU3
  91. [ 0.156311] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
  92. [ 0.156323] GICv3: CPU3: using allocated LPI pending table @0x000000007e900000
  93. [ 0.156352] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  94. [ 0.190974] CPU features: enabling workaround for EL2 vector hardening
  95. [ 0.191492] Detected PIPT I-cache on CPU4
  96. [ 0.192682] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
  97. [ 0.193131] GICv3: CPU4: using allocated LPI pending table @0x000000007e910000
  98. [ 0.194306] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
  99. [ 0.230546] Detected PIPT I-cache on CPU5
  100. [ 0.231695] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
  101. [ 0.232116] GICv3: CPU5: using allocated LPI pending table @0x000000007e920000
  102. [ 0.233180] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
  103. [ 0.236970] smp: Brought up 1 node, 6 CPUs
  104. [ 0.237366] SMP: Total of 6 processors activated.
  105. [ 0.237413] CPU features: detected: GIC system register CPU interface
  106. [ 0.237439] CPU features: detected: 32-bit EL0 Support
  107. [ 0.237474] CPU features: detected: CRC32 instructions
  108. [ 0.259298] CPU: All CPU(s) started at EL2
  109. [ 0.259784] alternatives: patching kernel code
  110. [ 0.263557] devtmpfs: initialized
  111. [ 0.281848] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  112. [ 0.282081] futex hash table entries: 2048 (order: 5, 131072 bytes)
  113. [ 0.283583] xor: measuring software checksum speed
  114. [ 0.323256] 8regs : 1154.000 MB/sec
  115. [ 0.363185] 8regs_prefetch: 42.000 MB/sec
  116. [ 0.403143] 32regs : 1415.000 MB/sec
  117. [ 0.443430] 32regs_prefetch: 1190.000 MB/sec
  118. [ 0.443457] xor: using function: 32regs (1415.000 MB/sec)
  119. [ 0.443496] pinctrl core: initialized pinctrl subsystem
  120. [ 0.447815] DMI not present or invalid.
  121. [ 0.449592] NET: Registered protocol family 16
  122. [ 0.454378] audit: initializing netlink subsys (disabled)
  123. [ 0.457636] audit: type=2000 audit(0.448:1): state=initialized audit_enabled=0 res=1
  124. [ 0.462878] cpuidle: using governor menu
  125. [ 0.465560] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
  126. [ 0.465686] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  127. [ 0.477292] DMA: preallocated 1024 KiB pool for atomic allocations
  128. [ 0.482668] Serial: AMBA PL011 UART driver
  129. [ 0.602456] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  130. [ 0.604398] cryptd: max_cpu_qlen set to 1000
  131. [ 0.673823] raid6: int64x1 gen() 219 MB/s
  132. [ 0.742346] raid6: int64x1 xor() 219 MB/s
  133. [ 0.811712] raid6: int64x2 gen() 8 MB/s
  134. [ 0.878695] raid6: int64x2 xor() 298 MB/s
  135. [ 0.946987] raid6: int64x4 gen() 517 MB/s
  136. [ 1.015429] raid6: int64x4 xor() 381 MB/s
  137. [ 1.083830] raid6: int64x8 gen() 490 MB/s
  138. [ 1.152259] raid6: int64x8 xor() 375 MB/s
  139. [ 1.220802] raid6: neonx1 gen() 364 MB/s
  140. [ 1.289128] raid6: neonx1 xor() 426 MB/s
  141. [ 1.357590] raid6: neonx2 gen() 583 MB/s
  142. [ 1.425952] raid6: neonx2 xor() 603 MB/s
  143. [ 1.494400] raid6: neonx4 gen() 754 MB/s
  144. [ 1.562764] raid6: neonx4 xor() 721 MB/s
  145. [ 1.631203] raid6: neonx8 gen() 820 MB/s
  146. [ 1.699613] raid6: neonx8 xor() 767 MB/s
  147. [ 1.699639] raid6: using algorithm neonx8 gen() 820 MB/s
  148. [ 1.699659] raid6: .... xor() 767 MB/s, rmw enabled
  149. [ 1.699684] raid6: using neon recovery algorithm
  150. [ 1.701630] ACPI: Interpreter disabled.
  151. [ 1.704621] vcc3v3_pcie: supplied by dc_12v
  152. [ 1.707718] vcc_sys: supplied by dc_12v
  153. [ 1.712574] vgaarb: loaded
  154. [ 1.713667] SCSI subsystem initialized
  155. [ 1.715183] libata version 3.00 loaded.
  156. [ 1.715839] usbcore: registered new interface driver usbfs
  157. [ 1.716342] usbcore: registered new interface driver hub
  158. [ 1.716804] usbcore: registered new device driver usb
  159. [ 1.719308] media: Linux media interface: v0.10
  160. [ 1.719514] videodev: Linux video capture interface: v2.00
  161. [ 1.719939] pps_core: LinuxPPS API ver. 1 registered
  162. [ 1.719981] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  163. [ 1.720032] PTP clock support registered
  164. [ 1.724024] Advanced Linux Sound Architecture Driver Initialized.
  165. [ 1.725932] Bluetooth: Core ver 2.22
  166. [ 1.726150] NET: Registered protocol family 31
  167. [ 1.726171] Bluetooth: HCI device and connection manager initialized
  168. [ 1.726203] Bluetooth: HCI socket layer initialized
  169. [ 1.726226] Bluetooth: L2CAP socket layer initialized
  170. [ 1.726348] Bluetooth: SCO socket layer initialized
  171. [ 1.726405] NetLabel: Initializing
  172. [ 1.726422] NetLabel: domain hash size = 128
  173. [ 1.726439] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  174. [ 1.726550] NetLabel: unlabeled traffic allowed by default
  175. [ 1.731503] clocksource: Switched to clocksource arch_sys_counter
  176. [ 1.732436] VFS: Disk quotas dquot_6.6.0
  177. [ 1.732593] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  178. [ 1.732961] pnp: PnP ACPI: disabled
  179. [ 1.750589] NET: Registered protocol family 2
  180. [ 1.754602] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
  181. [ 1.755513] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  182. [ 1.755826] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  183. [ 1.756227] TCP: Hash tables configured (established 16384 bind 16384)
  184. [ 1.756609] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  185. [ 1.756767] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  186. [ 1.757133] NET: Registered protocol family 1
  187. [ 1.765622] RPC: Registered named UNIX socket transport module.
  188. [ 1.765654] RPC: Registered udp transport module.
  189. [ 1.765673] RPC: Registered tcp transport module.
  190. [ 1.765691] RPC: Registered tcp NFSv4.1 backchannel transport module.
  191. [ 1.767495] PCI: CLS 0 bytes, default 64
  192. [ 1.768242] Trying to unpack rootfs image as initramfs...
  193. [ 2.349051] Freeing initrd memory: 7028K
  194. [ 2.357488] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  195. [ 2.360853] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  196. [ 2.361880] kvm [1]: 8-bit VMID
  197. [ 2.361926] kvm [1]: IPA Size Limit: 40bits
  198. [ 2.363766] kvm [1]: vgic-v2@fff20000
  199. [ 2.364151] kvm [1]: GIC system register CPU interface enabled
  200. [ 2.366670] kvm [1]: vgic interrupt IRQ10
  201. [ 2.370392] kvm [1]: Hyp mode initialized successfully
  202. [ 3.167687] workingset: timestamp_bits=44 max_order=19 bucket_order=0
  203. [ 3.185025] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  204. [ 3.187183] NFS: Registering the id_resolver key type
  205. [ 3.187302] Key type id_resolver registered
  206. [ 3.187322] Key type id_legacy registered
  207. [ 3.187352] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  208. [ 3.187376] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  209. [ 3.189457] fuse init (API version 7.28)
  210. [ 3.191626] 9p: Installing v9fs 9p2000 file system support
  211. [ 4.890039] NET: Registered protocol family 38
  212. [ 4.906270] Key type asymmetric registered
  213. [ 4.906320] Asymmetric key parser 'x509' registered
  214. [ 4.906533] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  215. [ 4.907424] io scheduler noop registered
  216. [ 4.907881] io scheduler cfq registered (default)
  217. [ 4.907904] io scheduler mq-deadline registered
  218. [ 4.907923] io scheduler kyber registered
  219. [ 4.918251] vcc5v0_host: supplied by vcc_sys
  220. [ 4.918633] phy phy-ff770000.syscon:usb2-phy@e450.1: Linked as a consumer to regulator.6
  221. [ 4.923810] phy phy-ff770000.syscon:usb2-phy@e460.3: Linked as a consumer to regulator.6
  222. [ 4.977111] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
  223. [ 4.977192] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  224. [ 4.982061] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
  225. [ 4.982134] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  226. [ 4.992858] pwm-regulator: supplied by vcc_sys
  227. [ 4.993530] vcc3v3_sys: supplied by vcc_sys
  228. [ 4.993653] vcc5v0_typec: supplied by vcc_sys
  229. [ 5.005750] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  230. [ 5.011853] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A
  231. [ 5.013283] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 38, base_baud = 1500000) is a 16550A
  232. [ 5.128629] printk: console [ttyS2] enabled
  233. [ 5.131942] SuperH (H)SCI(F) driver initialized
  234. [ 5.133592] msm_serial: driver initialized
  235. [ 5.212326] cacheinfo: Unable to detect cache hierarchy for CPU 0
  236. [ 5.234613] brd: module loaded
  237. [ 5.250307] loop: module loaded
  238. [ 5.309231] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
  239. [ 5.309876] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
  240. [ 5.317466] m25p80 spi0.0: gd25q128 (16384 Kbytes)
  241. [ 5.352001] 3 fixed-partitions partitions found on MTD device spi0.0
  242. [ 5.352630] Creating 3 MTD partitions on "spi0.0":
  243. [ 5.353093] 0x000000000000-0x0000003f8000 : "loader"
  244. [ 5.357079] 0x0000003f8000-0x000000400000 : "env"
  245. [ 5.359951] 0x0000007c0000-0x000000800000 : "vendor"
  246. [ 5.374505] libphy: Fixed MDIO Bus: probed
  247. [ 5.376699] tun: Universal TUN/TAP device driver, 1.6
  248. [ 5.389862] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  249. [ 5.390480] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  250. [ 5.391348] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  251. [ 5.391978] igb: Copyright (c) 2007-2014 Intel Corporation.
  252. [ 5.392569] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  253. [ 5.393276] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  254. [ 5.395740] sky2: driver version 1.30
  255. [ 5.400483] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
  256. [ 5.401352] rk_gmac-dwmac fe300000.ethernet: Linked as a consumer to regulator.4
  257. [ 5.402028] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  258. [ 5.402668] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
  259. [ 5.403278] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
  260. [ 5.403806] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  261. [ 5.404441] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
  262. [ 5.405075] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  263. [ 5.410642] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  264. [ 5.412811] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
  265. [ 5.413475] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
  266. [ 5.413952] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
  267. [ 5.414628] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
  268. [ 5.415410] rk_gmac-dwmac fe300000.ethernet: COE Type 2
  269. [ 5.415888] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
  270. [ 5.416524] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
  271. [ 5.417161] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
  272. [ 5.417698] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
  273. [ 5.418228] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  274. [ 5.558856] libphy: stmmac: probed
  275. [ 5.559237] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
  276. [ 5.560362] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
  277. [ 5.567927] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  278. [ 5.568768] usbcore: registered new interface driver pegasus
  279. [ 5.569364] usbcore: registered new interface driver rtl8150
  280. [ 5.570011] usbcore: registered new interface driver r8152
  281. [ 5.570588] usbcore: registered new interface driver asix
  282. [ 5.571261] usbcore: registered new interface driver ax88179_178a
  283. [ 5.571874] usbcore: registered new interface driver cdc_ether
  284. [ 5.572467] usbcore: registered new interface driver dm9601
  285. [ 5.573042] usbcore: registered new interface driver CoreChips
  286. [ 5.573635] usbcore: registered new interface driver smsc75xx
  287. [ 5.574232] usbcore: registered new interface driver smsc95xx
  288. [ 5.574882] usbcore: registered new interface driver net1080
  289. [ 5.575462] usbcore: registered new interface driver plusb
  290. [ 5.576017] usbcore: registered new interface driver cdc_subset
  291. [ 5.576610] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  292. [ 5.577372] usbcore: registered new interface driver cdc_ncm
  293. [ 5.578502] VFIO - User Level meta-driver version: 0.3
  294. [ 5.585996] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2
  295. [ 5.603159] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
  296. [ 5.611838] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2
  297. [ 5.628867] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  298. [ 5.629501] ehci-pci: EHCI PCI platform driver
  299. [ 5.630042] ehci-platform: EHCI generic platform driver
  300. [ 5.633721] ehci-platform fe380000.usb: EHCI Host Controller
  301. [ 5.634279] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
  302. [ 5.637616] ehci-platform fe380000.usb: irq 30, io mem 0xfe380000
  303. [ 5.651003] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  304. [ 5.653226] hub 1-0:1.0: USB hub found
  305. [ 5.653619] hub 1-0:1.0: 1 port detected
  306. [ 5.657470] ehci-platform fe3c0000.usb: EHCI Host Controller
  307. [ 5.658013] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
  308. [ 5.662312] ehci-platform fe3c0000.usb: irq 32, io mem 0xfe3c0000
  309. [ 5.675030] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  310. [ 5.677005] hub 2-0:1.0: USB hub found
  311. [ 5.677392] hub 2-0:1.0: 1 port detected
  312. [ 5.680070] ehci-orion: EHCI orion driver
  313. [ 5.681864] ehci-exynos: EHCI EXYNOS driver
  314. [ 5.682711] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  315. [ 5.683444] ohci-pci: OHCI PCI platform driver
  316. [ 5.684036] ohci-platform: OHCI generic platform driver
  317. [ 5.685077] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  318. [ 5.685715] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
  319. [ 5.688712] ohci-platform fe3a0000.usb: irq 31, io mem 0xfe3a0000
  320. [ 5.756340] hub 3-0:1.0: USB hub found
  321. [ 5.756755] hub 3-0:1.0: 1 port detected
  322. [ 5.758327] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  323. [ 5.759123] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
  324. [ 5.761177] ohci-platform fe3e0000.usb: irq 33, io mem 0xfe3e0000
  325. [ 5.824256] hub 4-0:1.0: USB hub found
  326. [ 5.824643] hub 4-0:1.0: 1 port detected
  327. [ 5.827178] ohci-exynos: OHCI EXYNOS driver
  328. [ 5.830628] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  329. [ 5.831243] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
  330. [ 5.834426] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
  331. [ 5.835444] xhci-hcd xhci-hcd.0.auto: irq 219, io mem 0xfe800000
  332. [ 5.837973] hub 5-0:1.0: USB hub found
  333. [ 5.838394] hub 5-0:1.0: 1 port detected
  334. [ 5.839550] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  335. [ 5.840076] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
  336. [ 5.840781] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  337. [ 5.841477] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  338. [ 5.843654] hub 6-0:1.0: USB hub found
  339. [ 5.844059] hub 6-0:1.0: 1 port detected
  340. [ 5.845486] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  341. [ 5.846011] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
  342. [ 5.851981] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
  343. [ 5.853016] xhci-hcd xhci-hcd.1.auto: irq 220, io mem 0xfe900000
  344. [ 5.855778] hub 7-0:1.0: USB hub found
  345. [ 5.856172] hub 7-0:1.0: 1 port detected
  346. [ 5.857714] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  347. [ 5.858236] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
  348. [ 5.859233] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
  349. [ 5.859914] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
  350. [ 5.861744] hub 8-0:1.0: USB hub found
  351. [ 5.862173] hub 8-0:1.0: 1 port detected
  352. [ 5.865835] usbcore: registered new interface driver usb-storage
  353. [ 5.879922] i2c /dev entries driver
  354. [ 5.891324] rk808 0-001b: chip id: 0x0
  355. [ 5.897667] rk808-regulator rk808-regulator: there is no dvs0 gpio
  356. [ 5.898297] rk808-regulator rk808-regulator: there is no dvs1 gpio
  357. [ 5.899654] DCDC_REG1: supplied by vcc_sys
  358. [ 5.901312] DCDC_REG2: supplied by vcc_sys
  359. [ 5.902256] DCDC_REG3: supplied by vcc_sys
  360. [ 5.903099] DCDC_REG4: supplied by vcc_sys
  361. [ 5.904136] LDO_REG1: supplied by vcc_sys
  362. [ 5.905806] LDO_REG2: supplied by vcc_sys
  363. [ 5.906369] vcc2v8_dvp: Bringing 3000000uV into 2800000-2800000uV
  364. [ 5.908149] LDO_REG3: supplied by vcc_sys
  365. [ 5.909697] LDO_REG4: supplied by vcc_sys
  366. [ 5.910250] vcc_sdio: Bringing 3300000uV into 3000000-3000000uV
  367. [ 5.912023] LDO_REG5: supplied by vcc_sys
  368. [ 5.913408] LDO_REG6: supplied by vcc_sys
  369. [ 5.914996] LDO_REG7: supplied by vcc_sys
  370. [ 5.916377] LDO_REG8: supplied by vcc_sys
  371. [ 5.917886] SWITCH_REG1: supplied by vcc3v3_sys
  372. [ 5.918670] SWITCH_REG2: supplied by vcc3v3_sys
  373. [ 5.924690] rk808-rtc rk808-rtc: registered as rtc0
  374. [ 5.926374] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  375. [ 5.927143] fan53555-reg: supplied by vcc_sys
  376. [ 5.928944] vcc1v8_s3: supplied by vcc_1v8
  377. [ 5.930454] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  378. [ 5.931168] fan53555-reg: supplied by vcc_sys
  379. [ 5.942568] rockchip-rga ff680000.rga: HW Version: 0x03.02
  380. [ 5.958883] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
  381. [ 6.002878] rockchip-iodomain ff320000.syscon:io-domains: Linked as a consumer to regulator.21
  382. [ 6.012052] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.14
  383. [ 6.013636] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.20
  384. [ 6.014497] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.17
  385. [ 6.015670] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.21
  386. [ 6.045597] Bluetooth: HCI UART driver ver 2.3
  387. [ 6.049715] cpu cpu0: Linked as a consumer to regulator.11
  388. [ 6.050565] cpu cpu0: Dropping the link to regulator.11
  389. [ 6.051656] cpu cpu0: Linked as a consumer to regulator.11
  390. [ 6.054687] cpu cpu4: Linked as a consumer to regulator.24
  391. [ 6.055888] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 KHz
  392. [ 6.057963] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 408000 KHz
  393. [ 6.058885] random: fast init done
  394. [ 6.060751] sdhci: Secure Digital Host Controller Interface driver
  395. [ 6.061304] sdhci: Copyright(c) Pierre Ossman
  396. [ 6.061934] Synopsys Designware Multimedia Card Interface Driver
  397. [ 6.063540] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
  398. [ 6.064498] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  399. [ 6.065103] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  400. [ 6.065659] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
  401. [ 6.066610] dwmmc_rockchip fe320000.dwmmc: Linked as a consumer to regulator.17
  402. [ 6.067336] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
  403. [ 6.067921] vcc_sdio: unsupportable voltage range: 3300000-3000000uV
  404. [ 6.081412] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  405. [ 6.097686] sdhci-pltfm: SDHCI platform and OF driver helper
  406. [ 6.100492] mmc1: CQHCI version 5.10
  407. [ 6.127046] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
  408. [ 6.133557] ledtrig-cpu: registered to indicate activity on CPUs
  409. [ 6.135758] usbcore: registered new interface driver usbhid
  410. [ 6.136269] usbhid: USB HID core driver
  411. [ 6.138513] rockchip-saradc ff100000.saradc: Linked as a consumer to regulator.2
  412. [ 6.146702] xt_time: kernel timezone is -0000
  413. [ 6.147144] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
  414. [ 6.147957] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
  415. [ 6.148754] IPVS: ipvs loaded.
  416. [ 6.149030] IPVS: [rr] scheduler registered.
  417. [ 6.149408] IPVS: [wrr] scheduler registered.
  418. [ 6.149794] IPVS: [lc] scheduler registered.
  419. [ 6.150172] IPVS: [wlc] scheduler registered.
  420. [ 6.150558] IPVS: [fo] scheduler registered.
  421. [ 6.150946] IPVS: [ovf] scheduler registered.
  422. [ 6.151339] IPVS: [lblc] scheduler registered.
  423. [ 6.151736] IPVS: [lblcr] scheduler registered.
  424. [ 6.152136] IPVS: [dh] scheduler registered.
  425. [ 6.152514] IPVS: [sh] scheduler registered.
  426. [ 6.152893] IPVS: [sed] scheduler registered.
  427. [ 6.153279] IPVS: [nq] scheduler registered.
  428. [ 6.153888] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
  429. [ 6.154504] Initializing XFRM netlink socket
  430. [ 6.155326] NET: Registered protocol family 10
  431. [ 6.156354] Segment Routing with IPv6
  432. [ 6.156921] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  433. [ 6.157849] NET: Registered protocol family 17
  434. [ 6.158281] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  435. [ 6.159538] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  436. [ 6.160066] Bluetooth: HIDP socket layer initialized
  437. [ 6.160538] 8021q: 802.1Q VLAN Support v1.8
  438. [ 6.161015] 9pnet: Installing 9P2000 support
  439. [ 6.161441] Key type dns_resolver registered
  440. [ 6.162618] registered taskstats version 1
  441. [ 6.163851] Btrfs loaded, crc32c=crc32c-generic
  442. [ 6.174269] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
  443. [ 6.184236] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  444. [ 6.186891] rk808-rtc rk808-rtc: setting system clock to 2019-02-01 14:20:32 UTC (1549030832)
  445. [ 6.187658] of_cfs_init
  446. [ 6.187907] of_cfs_init: OK
  447. [ 6.188374] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  448. [ 6.189134] cfg80211: failed to load regulatory.db
  449. [ 6.190072] vcc3v3_pcie: disabling
  450. [ 6.190398] ALSA device list:
  451. [ 6.190662] No soundcards found.
  452. [ 6.191308] ttyS2 - failed to request DMA
  453. [ 6.192128] Freeing unused kernel memory: 1536K
  454. [ 6.215760] Run /init as init process
  455. [ 6.333329] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 238
  456. [ 6.334019] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
  457. [ 6.336599] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
  458. [ 6.344997] GPT:Primary header thinks Alt. header is not at the end of the disk.
  459. [ 6.345683] GPT:60620799 != 62333951
  460. [ 6.346006] GPT:Alternate GPT header not at the end of the disk.
  461. [ 6.346542] GPT:60620799 != 62333951
  462. [ 6.346887] GPT: Use GNU Parted to correct GPT errors.
  463. [ 6.347393] mmcblk0: p1 p2 p3 p4 p5 p6 p7
  464. [ 6.563792] iommu: Adding device ff8f0000.vop to group 0
  465. [ 6.564434] rockchip-vop ff8f0000.vop: Linked as a consumer to ff8f3f00.iommu
  466. [ 6.566291] iommu: Adding device ff900000.vop to group 1
  467. [ 6.567104] rockchip-vop ff900000.vop: Linked as a consumer to ff903f00.iommu
  468. [ 6.572790] rockchip-drm display-subsystem: Linked as a consumer to ff8f0000.vop
  469. [ 6.573484] rockchip-drm display-subsystem: Linked as a consumer to ff900000.vop
  470. [ 6.574656] rockchip-drm display-subsystem: Linked as a consumer to ff940000.hdmi
  471. [ 6.578211] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
  472. [ 6.580874] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
  473. [ 6.581895] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
  474. [ 6.592774] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
  475. [ 6.594039] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  476. [ 6.594645] [drm] No driver support for vblank timestamp query.
  477. [ 6.595287] [drm] Cannot find any crtc or sizes
  478. [ 6.596486] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
  479. [ 7.607200] [drm] Cannot find any crtc or sizes
  480. [ 8.055389] async_tx: api initialized (async)
  481. [ 8.483066] EXT4-fs (mmcblk0p7): mounted filesystem with writeback data mode. Opts: (null)
  482. [ 8.876286] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  483. [ 8.878680] systemd[1]: Detected architecture arm64.
  484. [ 8.902181] systemd[1]: Set hostname to <rockpro64v_2_1>.
  485. [ 9.177580] systemd[1]: File /lib/systemd/system/systemd-udevd.service:34 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  486. [ 9.179119] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  487. [ 9.355116] random: systemd: uninitialized urandom read (16 bytes read)
  488. [ 9.356064] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  489. [ 9.367128] random: systemd: uninitialized urandom read (16 bytes read)
  490. [ 9.367807] systemd[1]: Reached target System Time Synchronized.
  491. [ 9.379208] random: systemd: uninitialized urandom read (16 bytes read)
  492. [ 9.380093] systemd[1]: Started ntp-systemd-netif.path.
  493. [ 9.392367] systemd[1]: Created slice User and Session Slice.
  494. [ 9.404353] systemd[1]: Created slice System Slice.
  495. [ 10.142071] systemd-journald[2505]: Received request to flush runtime journal from PID 1
  496. [ 10.454715] random: crng init done
  497. [ 10.454726] random: 7 urandom warning(s) missed due to ratelimiting
  498. [ 10.683569] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
  499. [ 10.683643] rockchip-pcie f8000000.pcie: Linked as a consumer to regulator.3
  500. [ 10.683687] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
  501. [ 10.683721] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
  502. [ 10.721737] rockchip-pinctrl pinctrl: pin gpio4-0 already requested by ff880000.i2s; cannot claim for 1-0010
  503. [ 10.722638] rockchip-pinctrl pinctrl: pin-128 (1-0010) status -22
  504. [ 10.723280] rockchip-pinctrl pinctrl: could not request pin 128 (gpio4-0) from group i2s-8ch-mclk on device rockchip-pinctrl
  505. [ 10.724286] es8316 1-0010: Error applying setting, reverse things back
  506. [ 10.724892] es8316: probe of 1-0010 failed with error -22
  507. [ 10.762988] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
  508. [ 10.763015] rockchip-pcie f8000000.pcie: MEM 0xfa000000..0xfbdfffff -> 0xfa000000
  509. [ 10.763023] rockchip-pcie f8000000.pcie: IO 0xfbe00000..0xfbefffff -> 0xfbe00000
  510. [ 10.763294] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
  511. [ 10.763303] pci_bus 0000:00: root bus resource [bus 00-1f]
  512. [ 10.763308] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
  513. [ 10.763313] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
  514. [ 10.763342] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
  515. [ 10.763430] pci 0000:00:00.0: supports D1
  516. [ 10.763434] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  517. [ 10.769198] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  518. [ 10.769442] pci 0000:01:00.0: [1b4b:9230] type 00 class 0x010601
  519. [ 10.769534] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00008000 invalid
  520. [ 10.769541] pci 0000:01:00.0: reg 0x10: [io size 0x0008]
  521. [ 10.769575] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00008040 invalid
  522. [ 10.769579] pci 0000:01:00.0: reg 0x14: [io size 0x0004]
  523. [ 10.769612] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00008100 invalid
  524. [ 10.769616] pci 0000:01:00.0: reg 0x18: [io size 0x0008]
  525. [ 10.769650] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00008140 invalid
  526. [ 10.769654] pci 0000:01:00.0: reg 0x1c: [io size 0x0004]
  527. [ 10.769688] pci 0000:01:00.0: reg 0x20: [io 0x800000-0x80001f]
  528. [ 10.769722] pci 0000:01:00.0: reg 0x24: [mem 0x00900000-0x009007ff]
  529. [ 10.769757] pci 0000:01:00.0: reg 0x30: [mem 0xd0000000-0xd000ffff pref]
  530. [ 10.769788] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 512)
  531. [ 10.769812] pci 0000:01:00.0: Enabling fixed DMA alias to 00.1
  532. [ 10.769984] pci 0000:01:00.0: PME# supported from D3hot
  533. [ 10.773842] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
  534. [ 10.773908] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
  535. [ 10.773926] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa00ffff pref]
  536. [ 10.773931] pci 0000:01:00.0: BAR 5: assigned [mem 0xfa010000-0xfa0107ff]
  537. [ 10.773991] pci 0000:01:00.0: BAR 4: no space for [io size 0x0020]
  538. [ 10.773995] pci 0000:01:00.0: BAR 4: failed to assign [io size 0x0020]
  539. [ 10.774000] pci 0000:01:00.0: BAR 0: no space for [io size 0x0008]
  540. [ 10.774044] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0008]
  541. [ 10.774048] pci 0000:01:00.0: BAR 2: no space for [io size 0x0008]
  542. [ 10.774052] pci 0000:01:00.0: BAR 2: failed to assign [io size 0x0008]
  543. [ 10.774056] pci 0000:01:00.0: BAR 1: no space for [io size 0x0004]
  544. [ 10.774060] pci 0000:01:00.0: BAR 1: failed to assign [io size 0x0004]
  545. [ 10.774064] pci 0000:01:00.0: BAR 3: no space for [io size 0x0004]
  546. [ 10.774068] pci 0000:01:00.0: BAR 3: failed to assign [io size 0x0004]
  547. [ 10.774076] pci 0000:00:00.0: PCI bridge to [bus 01]
  548. [ 10.774084] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
  549. [ 10.774473] ahci 0000:01:00.0: version 3.0
  550. [ 10.774492] pci 0000:00:00.0: enabling device (0000 -> 0002)
  551. [ 10.774615] ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS
  552. [ 10.833749] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
  553. [ 10.835628] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
  554. [ 10.835641] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
  555. [ 10.835837] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  556. [ 10.938879] FAT-fs (mmcblk0p6): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  557. [ 11.777759] ahci 0000:01:00.0: controller reset failed (0x80000001)
  558. [ 11.778466] ahci: probe of 0000:01:00.0 failed with error -5
  559. [ 11.800655] ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS
  560. [ 11.867557] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  561. [ 11.867582] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  562. [ 12.082957] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
  563. [ 12.082963] ahci 0000:01:00.0: flags: 64bit ncq fbs pio
  564. [ 12.085140] scsi host0: ahci
  565. [ 12.085492] scsi host1: ahci
  566. [ 12.089787] scsi host2: ahci
  567. [ 12.094170] scsi host3: ahci
  568. [ 12.095837] scsi host4: ahci
  569. [ 12.096412] scsi host5: ahci
  570. [ 12.096786] scsi host6: ahci
  571. [ 12.097141] scsi host7: ahci
  572. [ 12.097310] ata1: SATA max UDMA/133 abar m2048@0xfa010000 port 0xfa010100 irq 231
  573. [ 12.097316] ata2: SATA max UDMA/133 abar m2048@0xfa010000 port 0xfa010180 irq 231
  574. [ 12.097321] ata3: SATA max UDMA/133 abar m2048@0xfa010000 port 0xfa010200 irq 231
  575. [ 12.097326] ata4: SATA max UDMA/133 abar m2048@0xfa010000 port 0xfa010280 irq 231
  576. [ 12.097330] ata5: SATA max UDMA/133 abar m2048@0xfa010000 port 0xfa010300 irq 231
  577. [ 12.097335] ata6: SATA max UDMA/133 abar m2048@0xfa010000 port 0xfa010380 irq 231
  578. [ 12.097340] ata7: SATA max UDMA/133 abar m2048@0xfa010000 port 0xfa010400 irq 231
  579. [ 12.097344] ata8: SATA max UDMA/133 abar m2048@0xfa010000 port 0xfa010480 irq 231
  580. [ 12.454910] phy phy-ff770000.syscon:usb2-phy@e450.2: charger = USB_DCP_CHARGER
  581. [ 12.774117] NFSD: starting 45-second grace period (net f00000a1)
  582. [ 13.563184] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  583. [ 13.606700] ata1.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
  584. [ 13.606720] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
  585. [ 13.611110] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  586. [ 13.615026] ata4: SATA link down (SStatus 0 SControl 300)
  587. [ 13.615110] ata5: SATA link down (SStatus 0 SControl 300)
  588. [ 13.619204] ata6: SATA link down (SStatus 0 SControl 300)
  589. [ 13.623050] ata2: SATA link down (SStatus 0 SControl 300)
  590. [ 13.627042] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  591. [ 13.627321] ata8.00: ATAPI: MARVELL VIRTUAL, 1.09, max UDMA/66
  592. [ 13.628136] ata8.00: configured for UDMA/66
  593. [ 13.630933] ata7: SATA link down (SStatus 0 SControl 300)
  594. [ 13.651607] ata3.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
  595. [ 13.651626] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
  596. [ 13.657303] ata1.00: configured for UDMA/133
  597. [ 13.658377] scsi 0:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5
  598. [ 13.661240] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
  599. [ 13.661261] sd 0:0:0:0: [sda] 4096-byte physical blocks
  600. [ 13.661365] sd 0:0:0:0: [sda] Write Protect is off
  601. [ 13.661381] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  602. [ 13.661552] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  603. [ 13.701700] ata3.00: configured for UDMA/133
  604. [ 13.702130] scsi 2:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5
  605. [ 13.702891] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
  606. [ 13.702900] sd 2:0:0:0: [sdb] 4096-byte physical blocks
  607. [ 13.702940] sd 2:0:0:0: [sdb] Write Protect is off
  608. [ 13.702949] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  609. [ 13.703002] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  610. [ 13.705366] scsi 7:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5
  611. [ 13.740105] sda: sda1
  612. [ 13.741253] sd 0:0:0:0: [sda] Attached SCSI disk
  613. [ 13.771056] sdb: sdb1
  614. [ 13.772333] sd 2:0:0:0: [sdb] Attached SCSI disk
  615. [ 42.360451] device-mapper: uevent: version 1.0.3
  616. [ 42.360702] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
  617. [ 239.780519] md/raid1:md0: active with 2 out of 2 mirrors
  618. [ 239.812528] md0: detected capacity change from 0 to 2000260497408
  619. [ 240.271182] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
  620. [66204.313327] usb 7-1: new high-speed USB device number 2 using xhci-hcd
  621. [66204.527742] usb-storage 7-1:1.0: USB Mass Storage device detected
  622. [66204.529614] scsi host8: usb-storage 7-1:1.0
  623. [66204.584323] usbcore: registered new interface driver uas
  624. [66205.560769] scsi 8:0:0:0: Direct-Access ST350082 0AS PQ: 0 ANSI: 2 CCS
  625. [66205.562534] sd 8:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
  626. [66205.563585] sd 8:0:0:0: [sdc] Write Protect is off
  627. [66205.563601] sd 8:0:0:0: [sdc] Mode Sense: 00 38 00 00
  628. [66205.564355] sd 8:0:0:0: [sdc] Asking for cache data failed
  629. [66205.564871] sd 8:0:0:0: [sdc] Assuming drive cache: write through
  630. [66205.627850] sdc: sdc1
  631. [66205.630737] sd 8:0:0:0: [sdc] Attached SCSI disk
  632. [66251.505269] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
  633. [70278.222016] usb 7-1: USB disconnect, device number 2
  634. [70297.273537] usb 8-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
  635. [70297.316342] scsi host8: uas
  636. [70297.317216] scsi 8:0:0:0: Direct-Access ST1000LM 024 HN-M101MBB 8104 PQ: 0 ANSI: 6
  637. [70297.318471] sd 8:0:0:0: [sdc] Spinning up disk...
  638. [70298.349470] ...ready
  639. [70300.399123] sd 8:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
  640. [70300.399137] sd 8:0:0:0: [sdc] 4096-byte physical blocks
  641. [70300.399361] sd 8:0:0:0: [sdc] Write Protect is off
  642. [70300.399380] sd 8:0:0:0: [sdc] Mode Sense: 53 00 00 08
  643. [70300.399796] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  644. [70300.432781] sdc: sdc1
  645. [70300.434993] sd 8:0:0:0: [sdc] Attached SCSI disk
  646. [70300.641433] BTRFS: device label 1TB devid 1 transid 127 /dev/sdc1
  647. [70326.345115] BTRFS info (device sdc1): disk space caching is enabled
  648. [70326.345119] BTRFS info (device sdc1): has skinny extents
RAW Paste Data