Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- LINUX started...
- THIS IS ASIC
- SDK 5.0.S.0
- Linux version 3.10.14x+ (root@rogerlo-HP-1620B) (gcc version 4.6.3 (Buildroot 2012.11.1) ) #36 SMP Mon Nov 9 11:48:53 CST 2020
- The CPU feqenuce set to 880 MHz
- GCMP present
- CPU0 revision is: 0001992f (MIPS 1004Kc)
- Software DMA cache coherency
- Determined physical RAM map:
- memory: 08000000 @ 00000000 (usable)
- Zone ranges:
- DMA [mem 0x00000000-0x00ffffff]
- Normal [mem 0x01000000-0x07ffffff]
- Movable zone start for each node
- Early memory node ranges
- node 0: [mem 0x00000000-0x07ffffff]
- Detected 3 available secondary CPU(s)
- Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
- Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- PERCPU: Embedded 7 pages/cpu @814e0000 s6336 r8192 d14144 u32768
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
- Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock5 console=ttyS0,57600 root=31:05 rootfstype=squashfs init=/sbin/init
- PID hash table entries: 512 (order: -1, 2048 bytes)
- Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- Writing ErrCtl register=000010a4
- Readback ErrCtl register=000010a4
- Memory: 125856k/131072k available (3038k kernel code, 5216k reserved, 531k data, 200k init, 0k highmem)
- Hierarchical RCU implementation.
- NR_IRQS:128
- console [ttyS1] enabled
- Calibrating delay loop... 577.53 BogoMIPS (lpj=1155072)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 512
- launch: starting cpu1
- launch: cpu1 gone!
- CPU1 revision is: 0001992f (MIPS 1004Kc)
- Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
- Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- Synchronize counters for CPU 1: done.
- launch: starting cpu2
- launch: cpu2 gone!
- CPU2 revision is: 0001992f (MIPS 1004Kc)
- Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
- Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- Synchronize counters for CPU 2: done.
- launch: starting cpu3
- launch: cpu3 gone!
- CPU3 revision is: 0001992f (MIPS 1004Kc)
- Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
- Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- Synchronize counters for CPU 3: done.
- Brought up 4 CPUs
- NET: Registered protocol family 16
- release PCIe RST: RALINK_RSTCTRL = 7000000
- PCIE PHY initialize
- ***** Xtal 40MHz *****
- start MT7621 PCIe register access
- RALINK_RSTCTRL = 7000000
- RALINK_CLKCFG1 = 77ffeff8
- *************** MT7621 PCIe RC mode *************
- PCIE1 no card, disable it(RST&CLK)
- PCIE2 no card, disable it(RST&CLK)
- pcie_link status = 0x1
- RALINK_RSTCTRL= 1000000
- *** Configure Device number setting of Virtual PCI-PCI bridge ***
- RALINK_PCI_PCICFG_ADDR = 21007f2 -> 21007f2
- PCIE0 enabled
- interrupt enable status: 100000
- Port 0 N_FTS = 1b105000
- config reg done
- init_rt2880pci done
- bio: create slab <bio-0> at 0
- PCI host bridge to bus 0000:00
- pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
- pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff]
- pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000)
- pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
- pci 0000:00:00.0: BAR 1: assigned [mem 0x60100000-0x6010ffff]
- pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
- pci 0000:00:00.0: PCI bridge to [bus 01]
- pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
- BAR0 at slot 0 = 0
- bus=0x0, slot = 0x0
- res[0]->start = 0
- res[0]->end = 0
- res[1]->start = 60100000
- res[1]->end = 6010ffff
- res[2]->start = 0
- res[2]->end = 0
- res[3]->start = 0
- res[3]->end = 0
- res[4]->start = 0
- res[4]->end = 0
- res[5]->start = 0
- res[5]->end = 0
- bus=0x1, slot = 0x0, irq=0x4
- res[0]->start = 60000000
- res[0]->end = 600fffff
- res[1]->start = 0
- res[1]->end = 0
- res[2]->start = 0
- res[2]->end = 0
- res[3]->start = 0
- res[3]->end = 0
- res[4]->start = 0
- res[4]->end = 0
- res[5]->start = 0
- res[5]->end = 0
- Switching to clocksource MIPS
- NET: Registered protocol family 2
- TCP established hash table entries: 1024 (order: 1, 8192 bytes)
- TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
- TCP: Hash tables configured (established 1024 bind 1024)
- TCP: reno registered
- UDP hash table entries: 256 (order: 1, 8192 bytes)
- UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- NET: Registered protocol family 1
- 4 CPUs re-calibrate udelay(lpj = 1167360)
- squashfs: version 4.0 (2009/01/31) Phillip Lougher
- jffs2: version 2.2. (NAND) (ZLIB) (RTIME) (c) 2001-2006 Red Hat, Inc.
- msgmni has been set to 245
- io scheduler noop registered (default)
- Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- serial8250: ttyS0 at MMIO 0x1e000d00 (irq = 27) is a 16550A
- serial8250: ttyS1 at MMIO 0x1e000c00 (irq = 26) is a 16550A
- Ralink gpio driver initialized
- brd: module loaded
- flash manufacture id: c2, device id 20 18
- MX25L12805D(c2 2018c220) (16384 Kbytes)
- mtd .name = raspi, .size = 0x01000000 (16M) .erasesize = 0x00010000 (64K) .numeraseregions = 0
- Creating 9 MTD partitions on "raspi":
- 0x000000000000-0x000001000000 : "ALL"
- 0x000000000000-0x000000030000 : "u-boot"
- 0x000000030000-0x000000040000 : "nvram"
- 0x000000040000-0x000000050000 : "Factory"
- 0x000000050000-0x000000190000 : "linux4"
- 0x000000190000-0x000000ad0000 : "rootfs"
- 0x000000ad0000-0x000000b20000 : "LANG"
- 0x000000b20000-0x000000c60000 : "linux4b"
- 0x000000c60000-0x000001000000 : "rootfsb"
- rdm_major = 253
- GMAC1_MAC_ADRH -- : 0x0000a0a3
- GMAC1_MAC_ADRL -- : 0xzzzzzzzz
- Ralink APSoC Ethernet Driver Initilization. v3.1 1024 rx/tx descriptors allocated, mtu = 1500!
- GMAC1_MAC_ADRH -- : 0x0000a0a3
- GMAC1_MAC_ADRL -- : 0xzzzzzzzz
- PROC INIT OK!
- TCP: cubic registered
- NET: Registered protocol family 10
- sit: IPv6 over IPv4 tunneling driver
- NET: Registered protocol family 17
- VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
- Freeing unused kernel memory: 200K (8137e000 - 813b0000)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement