API tools faq
paste
Advertisement
tieuvinhlong

10moons-S905x_M1303-v1.0-amlogic

tieuvinhlong
Apr 25th, 2017
783
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 49.42 KB | None | 0 0
raw download clone embed print report
  1. gxl_p212_v1#reset
  2. resetting ...
  3. GXL:BL1:9ac50e:a1974b;FEAT:ADFC318C;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
  4. TE: 103593
  5.  
  6. BL2 Built : 19:41:49, Jun 20 2016.
  7. gxl ge299011 - xiaobo.gu@droid05
  8.  
  9. set vcck to 1120 mv
  10. set vddee to 1000 mv
  11. Board ID = 2
  12. CPU clk: 1200MHz
  13. DDR3 chl: Rank0+1 @ 912MHz - PASS
  14. DQS-corr enabled
  15. DDR scramble enabled
  16. Rank0: 1024MB(auto)-2T-13
  17. Rank1: 1024MB(auto)-2T-13
  18. DataBus test pass!
  19. AddrBus test pass!
  20. -s
  21. Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
  22. New fip structure!
  23. Load bl30 from eMMC, src: 0x00010200, des: 0x01100000, size: 0x0000d600
  24. Load bl31 from eMMC, src: 0x00020200, des: 0x10100000, size: 0x00014400
  25. Load bl33 from eMMC, src: 0x00038200, des: 0x01000000, size: 0x000a7400
  26. NOTICE:  BL3-1: v1.0(debug):c813a61
  27. NOTICE:  BL3-1: Built : 14:39:44, Jun 16 2016
  28. aml log : bl31 normal boot !
  29. [Image: gxl_v1.1.3138-fca9764 2016-08-04 16:15:33 yun.cai@droid06]
  30. OPS=0x82
  31. 2f 79 1b bf 9c 64 3 e7 49 f9 d1 ef [0.342797 Inits done]
  32. secure task start!
  33. high task start!
  34. low task start!
  35. INFO:    BL3-1: Initializing runtime services
  36. WARNING: No OPTEE provided by BL2 boot loader
  37. ERROR:   Error initializing runtime service opteed_fast
  38. INFO:    BL3-1: Preparing for EL3 exit to normal world
  39. INFO:    BL3-1: Next image address = 0x1000000
  40. INFO:    BL3-1: Next image spsr = 0x3c9
  41.  
  42.  
  43. U-Boot 2015.01 (Mar 15 2017 - 19:43:11)
  44.  
  45. DRAM:  2 GiB
  46. Relocation Offset is: 76ecc000
  47. register usb cfg[0][1] = 0000000077f60198
  48. vpu: error: vpu: check dts: FDT_ERR_BADMAGIC, load default parameters
  49. vpu: clk_level = 7
  50. vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300)
  51. vpp: vpp_init
  52. boot_device_flag : 1
  53. Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
  54. init bus_cycle=6, bus_timing=7, system=5.0ns
  55. reset failed
  56. get_chip_type and ret:fffffffe
  57. get_chip_type and ret:fffffffe
  58. chip detect failed and ret:fffffffe
  59. nandphy_init failed and ret=0xfffffff1
  60. MMC:   aml_priv->desc_buf = 0x0000000073ecc6b0
  61. aml_priv->desc_buf = 0x0000000073ece9d0
  62. SDIO Port B: 0, SDIO Port C: 1
  63. emmc/sd response timeout, cmd8, status=0x1ff2800
  64. emmc/sd response timeout, cmd55, status=0x1ff2800
  65. [mmc_startup] mmc refix success
  66. [mmc_init] mmc init success
  67. mmc read lba=0x14000, blocks=0x400
  68.       Amlogic multi-dtb tool
  69.       Single dtb detected
  70. start dts,buffer=0000000073ed1270,dt_addr=0000000073ed1270
  71. parts: 11
  72. 00:      logo   0000000002000000 1
  73. 01:  recovery   0000000002000000 1
  74. 02:       rsv   0000000000800000 1
  75. 03:       tee   0000000000800000 1
  76. 04:     crypt   0000000002000000 1
  77. 05:      misc   0000000002000000 1
  78. 06: instaboot   0000000020000000 1
  79. 07:      boot   0000000002000000 1
  80. 08:    system   0000000040000000 1
  81. 09:     cache   0000000020000000 2
  82. 10:      data   ffffffffffffffff 4
  83. get_dtb_struct: Get emmc dtb OK!
  84. overide_emmc_partition_table: overide cache
  85. [mmc_get_partition_table] skip partition cache.
  86. Partition table get from SPL is :
  87.         name                        offset              size              flag
  88. ===================================================================================
  89.    0: bootloader                         0            400000                  0
  90.    1: reserved                     2400000           4000000                  0
  91.    2: cache                        6c00000          20000000                  2
  92.    3: env                         27400000            800000                  0
  93.    4: logo                        28400000           2000000                  1
  94.    5: recovery                    2ac00000           2000000                  1
  95.    6: rsv                         2d400000            800000                  1
  96.    7: tee                         2e400000            800000                  1
  97.    8: crypt                       2f400000           2000000                  1
  98.    9: misc                        31c00000           2000000                  1
  99.   10: instaboot                   34400000          20000000                  1
  100.   11: boot                        54c00000           2000000                  1
  101.   12: system                      57400000          40000000                  1
  102.   13: data                        97c00000         30c200000                  4
  103. mmc read lba=0x12000, blocks=0x2
  104. mmc read lba=0x12002, blocks=0x2
  105. mmc_read_partition_tbl: mmc read partition OK!
  106. eMMC/TSD partition table have been checked OK!
  107. mmc env offset: 0x27400000
  108. In:    serial
  109. Out:   serial
  110. Err:   serial
  111. reboot_mode=watchdog_reboot
  112. hpd_state=1
  113. [1080p60hz] is invalid for cvbs.
  114. set hdmitx VIC = 16
  115. config HPLL = 2970
  116. HPLL: 0xc000027b
  117. config HPLL done
  118. j = 4  vid_clk_div = 1
  119. hdmitx phy setting done
  120. hdmitx: set enc for VIC: 16
  121. enc_vpu_bridge_reset[1183]
  122. rx version is 1.4 or below  div=10
  123. [store]To run cmd[emmc dtb_read 0x1000000 0x40000]
  124. read emmc dtb
  125.       Amlogic multi-dtb tool
  126.       Single dtb detected
  127. Net:   dwmac.c9410000
  128. wipe_data=successful
  129. wipe_cache=successful
  130. upgrade_step=0
  131. [OSD]load fb addr from dts
  132. [OSD]failed to get fb addr for logo
  133. [OSD]use default fb_addr parameters
  134. [OSD]fb_addr for logo: 0x3d800000
  135. [OSD]load fb addr from dts
  136. [OSD]failed to get fb addr for logo
  137. [OSD]use default fb_addr parameters
  138. [OSD]fb_addr for logo: 0x3d800000
  139. [CANVAS]addr=0x3d800000 width=3840, height=2160
  140.  
  141. amlkey_init() enter!
  142. [EFUSE_MSG]keynum is 4
  143. [KM]Error:f[key_manage_query_size]L507:key[usid] not programed yet
  144. [KM]Error:f[key_manage_query_size]L507:key[deviceid] not programed yet
  145. gpio: pin GPIOAO_2 (gpio 102) value is 0
  146. detect upgrade key
  147. gpio: pin GPIOAO_2 (gpio 102) value is 1
  148. Hit Enter or space or Ctrl+C key to stop autoboot -- :  0
  149. ee_gate_off ...
  150. ## Booting Android Image at 0x01080000 ...
  151.       Amlogic multi-dtb tool
  152.       Single dtb detected
  153. load dtb from 0x1000000 ......
  154.    Loading Kernel Image ... OK
  155.    kernel loaded at 0x01080000, end = 0x020afef0
  156.    Loading Ramdisk to 73b7e000, end 73eba171 ... OK
  157.    Loading Device Tree to 000000001fff3000, end 000000001ffff19d ... OK
  158. signature:
  159. fdt_instaboot: no instaboot image
  160.  
  161. Starting kernel ...
  162.  
  163. uboot time: 4731139 us
  164. [    0.000000@0] Initializing cgroup subsys cpu
  165. [    0.000000@0] Initializing cgroup subsys cpuacct
  166. [    0.000000@0] Linux version 3.14.29 (zxzh@moons-104) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC
  167.  4.9-2014.09) ) #1 SMP PREEMPT Wed Mar 15 14:20:58 CST 2017
  168. [    0.000000@0] CPU: AArch64 Processor [410fd034] revision 4
  169. [    0.000000@0] no prop version_code
  170. [    0.000000@0] bootconsole [earlycon0] enabled
  171. [    0.000000@0] fdt Reserved memory table:
  172. [    0.000000@0]            linux,meson-fb: 0x000000007e000000 - 0x0000000080000000  (32 MiB)
  173. [    0.000000@0]                  linux,di: 0x000000007c200000 - 0x000000007e000000  (30 MiB)
  174. [    0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x000000007c200000, size 30 MiB
  175. [    0.000000@0]             linux,ion-dev: 0x000000007a200000 - 0x000000007c200000  (32 MiB)
  176. [    0.000000@0]               linux,ppmgr: 0x0000000078200000 - 0x000000007a200000  (32 MiB)
  177. [    0.000000@0]        linux,codec_mm_cma: 0x0000000066800000 - 0x0000000073800000  (208 MiB)
  178. [    0.000000@0]              linux,picdec: 0x0000000078200000 - 0x0000000078200000  (0 MiB)
  179. [    0.000000@0] Reserved memory: incorrect alignment of CMA region
  180. [    0.000000@0]   linux,codec_mm_reserved: 0x0000000074100000 - 0x0000000078200000  (65 MiB)
  181. [    0.000000@0] fdt Reserved memory total:  402 MiB
  182. [    0.000000@0] cma: Reserved 8 MiB at 66000000
  183. [    0.000000@0] psci: probing function IDs from device-tree
  184. [    0.000000@0] PERCPU: Embedded 12 pages/cpu @ffffffc0740a1000 s19328 r8192 d21632 u49152
  185. [    0.000000@0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 502232
  186. [    0.000000@0] Kernel command line: root=/dev/system rootfstype=ext4 init=/sbin/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0
  187. xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=enforcing logo=osd1,loaded,0x3d800000,1080p6
  188. 0hz maxcpus=4 vout=1080p60hz,enable hdmimode=1080p60hz cvbsmode=576cvbs hdmitx=1080p60hz cvbsdrv=0 androidboot.firstboot=1 jtag=apee androidboot.hard
  189. ware=amlogic mac=00:15:18:10:CE:28 androidboot.mac=00:15:18:10:CE:28
  190. [    0.000000@0] logo: osd1
  191. [    0.000000@0] logo: loaded
  192. [    0.000000@0] logo: 0x3d800000
  193. [    0.000000@0] logo: 1080p60hz
  194. [    0.000000@0] vout_serve: 1080p60hz: 16
  195. [    0.000000@0] vout_serve: enable: 1
  196. [    0.000000@0] logo: get hdmimode: 1080p60hz
  197. [    0.000000@0] logo: get cvbsmode: 576cvbs
  198. [    0.000000@0] tv_vout: cvbs performance line = 0
  199. [    0.000000@0] jtag: jtag select 3
  200. [    0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
  201. [    0.000000@0] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  202. [    0.000000@0] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  203. [    0.000000@0] Memory: 1592760K/2044928K available (10476K kernel code, 1143K rwdata, 3784K rodata, 1162K init, 5811K bss, 452168K reserved)
  204. [    0.000000@0] Virtual kernel memory layout:
  205. [    0.000000@0]     vmalloc : 0xffffff8000000000 - 0xffffff8040000000   (  1024 MB)
  206. [    0.000000@0]     vmemmap : 0xffffff8040010000 - 0xffffff8042380000   (    35 MB)
  207. [    0.000000@0]     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
  208. [    0.000000@0]     memory  : 0xffffffc000000000 - 0xffffffc07e000000   (  2016 MB)
  209. [    0.000000@0]       .init : 0xffffffc001e6f000 - 0xffffffc001f91b80   (  1163 kB)
  210. [    0.000000@0]       .text : 0xffffffc001080000 - 0xffffffc001e6e1b4   ( 14265 kB)
  211. [    0.000000@0]       .data : 0xffffffc001f92000 - 0xffffffc0020afef0   (  1144 kB)
  212. [    0.000000@0] PM: Registered nosave memory: [mem 0x01080000-0x01e6dfff]
  213. [    0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
  214. [    0.000000@0] arch_multi_cluster:0
  215. [    0.000000@0] Preemptible hierarchical RCU implementation.
  216. [    0.000000@0]        RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  217. [    0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  218. [    0.000000@0] NR_IRQS:64 nr_irqs:64 0
  219. [    0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys).
  220. [    0.000005@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
  221. [    0.008506@0] Console: colour dummy device 80x25
  222. [    0.012870@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  223. [    0.023448@0] pid_max: default: 32768 minimum: 301
  224. [    0.028336@0] Security Framework initialized
  225. [    0.032561@0] SELinux:  Initializing.
  226. [    0.036312@0] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  227. [    0.043145@0] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  228. [    0.052811@0] device-tree: Duplicate name in /efusekey, renamed to "key0#1"
  229. [    0.057521@0] device-tree: Duplicate name in /efusekey, renamed to "key1#1"
  230. [    0.064488@0] device-tree: Duplicate name in /efusekey, renamed to "key2#1"
  231. [    0.071495@0] device-tree: Duplicate name in /efusekey, renamed to "key3#1"
  232. [    0.081682@0] Initializing cgroup subsys debug
  233. [    0.082951@0] Initializing cgroup subsys freezer
  234. [    0.087614@0] ftrace: allocating 36161 entries in 142 pages
  235. [    0.131898@0] /cpus/cpu@0: Missing clock-frequency property
  236. [    0.131939@0] /cpus/cpu@1: Missing clock-frequency property
  237. [    0.137516@0] /cpus/cpu@2: Missing clock-frequency property
  238. [    0.143141@0] /cpus/cpu@3: Missing clock-frequency property
  239. [    0.148716@0] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
  240. [    0.197100@0] ftrace: Allocated trace_printk buffers
  241. [    0.199287@0] Meson chip version = RevA (21:A - 82:0)
  242. [    0.217675@1] CPU1: Booted secondary processor
  243. [    0.237669@2] CPU2: Booted secondary processor
  244. [    0.257688@3] CPU3: Booted secondary processor
  245. [    0.257772@0] Brought up 4 CPUs
  246. [    0.268740@0] SMP: Total of 4 processors activated.
  247. [    0.274218@0] devtmpfs: initialized
  248. [    0.284485@0] sched: registering cpufreq notifiers for scale-invariant loads
  249. [    0.286011@0] instabooting: 0
  250. [    0.298655@0] pinctrl core: initialized pinctrl subsystem
  251. [    0.299366@0] regulator-dummy: no parameters
  252. [    0.303524@0] NET: Registered protocol family 16
  253. [    0.309243@0] ramoops: using module parameters
  254. [    0.312457@0] console [pstore-1] enabled
  255. [    0.315821@0] pstore: Registered ramoops as persistent store backend
  256. [    0.322227@0] ramoops: attached 0x100000@0x7300000, ecc: 0/0
  257. [    0.329051@0] aml_vdac_init: module init
  258. [    0.332003@0] register canvas platform driver
  259. [    0.336328@0] register rdma platform driver
  260. [    0.341984@0] vdso: 2 pages (1 code, 1 data) at base ffffffc001f9c000
  261. [    0.346941@0] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  262. [    0.354528@0] DMA: preallocated 256 KiB pool for atomic allocations
  263. [    0.361145@0] software IO TLB [mem 0x61c00000-0x62000000] (4MB) mapped at [ffffffc061c00000-ffffffc061ffffff]
  264. [    0.370159@0] Serial: AMBA PL011 UART driver
  265. [    0.374952@0] aml_i2c version: 20140813
  266. [    0.378540@0] i2c-core: driver [pmu4] using legacy resume method
  267. [    0.384521@0] codec_mm:codec_mm_module_init
  268. [    0.388793@0] aml_watch_point_probe, in
  269. [    0.392723@0] gxbb_mpll_clk: register mpll_clk_out0 success done
  270. [    0.398449@0] gxbb_mpll_clk: register mpll_clk_out1 success done
  271. [    0.404461@0] gxbb_mpll_clk: register mpll_clk_out2 success done
  272. [    0.410678@0] clk_sys: register PLL sys_pll success done
  273. [    0.415842@0] gxl_clk: [ xtal        ] ->clockrate: 24000000Hz
  274. [    0.421180@0] gxl_clk: [ 32Khz       ] ->clockrate: 32000Hz
  275. [    0.426334@0] gxl_clk: [ clk81       ] ->clockrate: 166666666Hz
  276. [    0.431853@0] gxl_clk: [ fixed_pll   ] ->clockrate: 2000000000Hz
  277. [    0.437797@0] gxl_clk: [ fclk_div2   ] ->clockrate: 1000000000Hz
  278. [    0.443752@0] gxl_clk: [ fclk_div3   ] ->clockrate: 666666666Hz
  279. [    0.449608@0] gxl_clk: [ fclk_div4   ] ->clockrate: 500000000Hz
  280. [    0.455477@0] gxl_clk: [ fclk_div5   ] ->clockrate: 400000000Hz
  281. [    0.461333@0] gxl_clk: [ fclk_div7   ] ->clockrate: 285714285Hz
  282. [    0.467223@0] gxl_clk: clock initialization complete
  283. [    0.472379@0] clkmsr: Gxl msr_clk_reg0=ffffff800003a75c,msr_clk_reg2=ffffff800003c764
  284. [    0.482332@0] aml_iomap: amlogic iomap probe done
  285. [    0.485464@0] pinmux-gxl c1109880.pinmux: Init pinux probe!
  286. [    0.491342@0] pinmux-gxl c1109880.pinmux: Probed amlogic pinctrl driver
  287. [    0.497574@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xbc)
  288. [    0.505116@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xbc)
  289. [    0.513333@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xbc)
  290. [    0.521208@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xbc)
  291. [    0.531769@0] codec_mm has 2 memory regions
  292. [    0.533461@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_cma ok
  293. [    0.541507@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_reserved ok
  294. [    0.550107@0] codec_mm has 2 memory regions
  295. [    0.554201@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_cma ok
  296. [    0.562226@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_reserved ok
  297. [    0.572635@0] vpu: driver version: v02
  298. [    0.574495@0] vpu: load vpu_clk: 666667000Hz(7)
  299. [    0.579122@0] vpu: vpu_probe OK
  300. [    0.583836@0] tv_vout: tvout_probe
  301. [    0.585592@0] tv_vout: major number 254 for disp
  302. [    0.590221@0] vout_notify: vout_register_server
  303. [    0.594788@0] tv_vout: register tv module server ok
  304. [    0.599787@0] tv_vout: tvout_probe OK
  305. [    0.604004@0] canvas_probe reg=00000000c8838000,size=400
  306. [    0.608720@0] canvas maped reg_base =ffffff800008e000
  307. [    0.617926@0] rdma_probe
  308. [    0.900616@0] bio: create slab <bio-0> at 0
  309. [    0.901723@0] SCSI subsystem initialized
  310. [    0.903718@0] usbcore: registered new interface driver usbfs
  311. [    0.908981@0] usbcore: registered new interface driver hub
  312. [    0.914541@0] usbcore: registered new device driver usb
  313. [    0.920588@0] i2c-gpio i2c_gpio.37: using pins 172 (SDA) and 173 (SCL)
  314. [    0.926353@0] Linux video capture interface: v2.00
  315. [    0.931232@0] pps_core: LinuxPPS API ver. 1 registered
  316. [    0.936162@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  317. [    0.945707@0] PTP clock support registered
  318. [    0.950325@0] hdmitx: system: amhdmitx_init
  319. [    0.953837@0] hdmitx: system: Ver: 2014May6
  320. [    0.958204@0] hdmitx: system: amhdmitx_probe
  321. [    0.962711@0] hdmitx: system: not find match init-data
  322. [    0.967487@0] hdmitx: system: not find match pwr-ctl
  323. [    0.972492@0] hdmitx hpd irq = 89
  324. [    0.976279@0] hdmitx20: Mapped PHY: 0xc0800000
  325. [    0.980269@0] hdmitx20: Mapped PHY: 0xc1104400
  326. [    0.984758@0] hdmitx20: Mapped PHY: 0xc8100000
  327. [    0.989188@0] hdmitx20: Mapped PHY: 0xc8834000
  328. [    0.993649@0] hdmitx20: Mapped PHY: 0xc883a000
  329. [    0.998120@0] hdmitx20: Mapped PHY: 0xc883c000
  330. [    1.002582@0] hdmitx20: Mapped PHY: 0xd0100000
  331. [    1.007038@0] hdmitx20: Mapped PHY: 0xda83a000
  332. [    1.011514@0] hdmitx: alread display in uboot 0x10
  333. [    1.016328@0] avmute set to 1
  334. [    1.019692@0] vout_serve: vout_init_module
  335. [    1.023526@0] tv_vout: tv_set_current_vmode[756]fps_target_mode=16
  336. [    1.029618@0] hdmitx: system: irq 80000002
  337. [    1.033741@0] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60
  338. [    1.040641@0] tv_vout: already display in uboot
  339. [    1.045192@0] vout_serve: vinfo mode is: 1080p60hz
  340. [    1.049999@0] vout_serve: init mode 1080p60hz
  341. [    1.054495@0] vout_serve: create vout attribute OK
  342. [    1.059196@0] vout_serve: meson_vout_probe OK
  343. [    1.063765@0] logo: logo_init
  344. [    1.066786@0] osd_rdma: osd_rdma_init: rmda_table p=0x66041000,op=0x66041000 , v=0xffffff80000a9000
  345. [    1.076092@0] Advanced Linux Sound Architecture Driver Initialized.
  346. [    1.082590@0] Bluetooth: Core ver 2.18
  347. [    1.085991@0] NET: Registered protocol family 31
  348. [    1.090338@0] Bluetooth: HCI device and connection manager initialized
  349. [    1.096922@0] Bluetooth: HCI socket layer initialized
  350. [    1.102101@0] Bluetooth: L2CAP socket layer initialized
  351. [    1.107255@0] Bluetooth: SCO socket layer initialized
  352. [    1.112740@0] cfg80211: Calling CRDA to update world regulatory domain
  353. [    1.119138@0] NetLabel: Initializing
  354. [    1.122449@0] NetLabel:  domain hash size = 128
  355. [    1.126998@0] NetLabel:  protocols = UNLABELED CIPSOv4
  356. [    1.132226@0] NetLabel:  unlabeled traffic allowed by default
  357. [    1.140001@0] Switched to clocksource arch_sys_counter
  358. [    1.192613@0] [amlatvdemod..]aml_atvdemod_init.
  359. [    1.192738@0] NET: Registered protocol family 2
  360. [    1.196609@0] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  361. [    1.203853@0] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  362. [    1.210652@0] TCP: Hash tables configured (established 16384 bind 16384)
  363. [    1.217193@0] TCP: reno registered
  364. [    1.220697@0] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  365. [    1.226796@0] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  366. [    1.233632@0] NET: Registered protocol family 1
  367. [    1.238322@0] RPC: Registered named UNIX socket transport module.
  368. [    1.244105@0] RPC: Registered udp transport module.
  369. [    1.248982@0] RPC: Registered tcp transport module.
  370. [    1.254020@0] RPC: Registered tcp NFSv4.1 backchannel transport module.
  371. [    1.260723@0] aml_wifi wifi.32: [wifi_dev_probe] no power_on_pin2
  372. [    1.266660@0] aml_wifi wifi.32: [wifi_dev_probe] set pwm as 32k output
  373. [    1.273386@0] aml_wifi wifi.32: [wifi_dev_probe] dhd_static_buf setup
  374. [    1.279753@0] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem: WIFI MEM Allocated
  375. [    1.287468@0] aml_wifi wifi.32: [wifi_dev_probe] interrupt_pin=241
  376. [    1.293529@0] aml_wifi wifi.32: [wifi_dev_probe] irq_num=100, irq_trigger_type=1
  377. [    1.301078@0] aml_wifi wifi.32: [wifi_dev_probe] power_on_pin=240
  378. [    1.307084@0] aml_wifi wifi.32: [wifi_dev_probe] clock_32k_pin=0
  379. [    1.313521@0] aml_wifi wifi.32: [wifi_setup_dt] wifi_setup_dt
  380. [    1.319055@0] aml_wifi wifi.32: [wifi_setup_dt] interrupt_pin(241)
  381. [    1.325130@0] aml_wifi wifi.32: [wifi_setup_dt] power_on_pin(240)
  382. [    1.331585@0] Unpacking initramfs...
  383. [    1.380144@0] hdmitx: plugin
  384. [    1.477308@3] Freeing initrd memory: 3312K (ffffffc073b7e000 - ffffffc073eba000)
  385. [    1.517232@0] hdmitx: edid: check sum valid
  386. [    1.517266@0] hdmitx: edid: check sum valid
  387. [    1.520190@0] hdmitx: edid: blk0 raw data
  388. [    1.524111@0] 00ffffffffffff0036743000010000000a160103807341780acf74a3574cb023
  389. [    1.524111@0] 09484c21080081804540614095000101010101010101023a801871382d40582c
  390. [    1.524111@0] 4500c48e2100001e662150b051001b3040703600c48e2100001e000000fc004d
  391. [    1.524111@0] 537461722044656d6f0a2020000000fd00324b1e5017000a20202020202001f1
  392. [    1.524111@0]
  393. [    1.524111@0]
  394. [    1.556625@0] hdmitx: edid: blk1 raw data
  395. [    1.560524@0] 02032cf24d010304050790121314169f202226090707111750830100006e030c
  396. [    1.560524@0] 001000b82d20c004014100008c0ad08a20e02d10103e9600c48e210000188c0a
  397. [    1.560524@0] d090204031200c405500c48e21000018011d00bc52d01e20b8285540c48e2100
  398. [    1.560524@0] 001e011d80d0721c1620102c2580c48e2100009e000000000000000000000018
  399. [    1.560524@0]
  400. [    1.560524@0]
  401. [    1.593145@0] EDID Parser:
  402. [    1.595604@0] hdmitx: edid: find IEEEOUT
  403. [    1.599534@0]
  404. [    1.601298@0] hdmitx: update RX hdr info 0
  405. [    1.607285@0] hdmitx: ddc rd8b error 0x3a 0x50
  406. [    1.613774@0] receive ksv list len:1,depth:1,cas:0,dev:0
  407. [    1.615078@0] hdmitx: video: get current mode: 1080p60hz
  408. [    1.620742@0] hdmitx: update rx hdr info 0
  409. [    1.624542@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
  410. [    1.631276@0] hdmtix: set audio
  411. [    1.634540@0] hdmitx tx_aud_src = 0
  412. [    1.637919@0] hdmitx: system: irq 80000001
  413. [    1.642170@0] hdmitx aud_n_para = 6144
  414. [    1.645806@0] hdmitx set channel status
  415. [    1.649706@0] Start = 0x10000100   End = 0x100001ff
  416. [    1.650867@1] futex hash table entries: 1024 (order: 4, 65536 bytes)
  417. [    1.650946@1] audit: initializing netlink subsys (disabled)
  418. [    1.651009@1] audit: type=2000 audit(1.490:1): initialized
  419. [    1.652027@1] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  420. [    1.659893@1] VFS: Disk quotas dquot_6.5.2
  421. [    1.660281@1] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  422. [    1.665897@1] NFS: Registering the id_resolver key type
  423. [    1.665932@1] Key type id_resolver registered
  424. [    1.665933@1] Key type id_legacy registered
  425. [    1.665959@1] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
  426. [    1.666922@1] fuse init (API version 7.22)
  427. [    1.667730@1] msgmni has been set to 3549
  428. [    1.718787@0] [0x10000103]: 0x00000008
  429. [    1.720093@1] NET: Registered protocol family 38
  430. [    1.720551@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  431. [    1.720559@1] io scheduler noop registered
  432. [    1.720561@1] io scheduler deadline registered
  433. [    1.720780@1] io scheduler cfq registered (default)
  434. [    1.748252@0] [0x10000104]: 0x00000001
  435. [    1.752168@0] [0x10000170]: 0x00000010
  436. [    1.755627@0] [0x10000180]: 0x000000ff
  437. [    1.759365@0] [0x10000181]: 0x000000ff
  438. [    1.763150@0] [0x10000182]: 0x00000003
  439. [    1.766891@0] [0x10000183]: 0x00000007
  440. [    1.770807@0] [0x10000184]: 0x0000003f
  441. [    1.774416@0] [0x10000185]: 0x00000002
  442. [    1.778178@0] [0x10000187]: 0x000000ff
  443. [    1.781961@0] [0x10000188]: 0x00000003
  444. [    1.795689@1] meson-rng c8834000.rng: hwrng registered
  445. [    1.799651@1] loop: module loaded
  446. [    1.800385@1] zram: Created 1 device(s) ...
  447. [    1.803806@1] mtdoops: mtd device (mtddev=name/number) must be supplied
  448. [    1.813170@1] tun: Universal TUN/TAP device driver, 1.6
  449. [    1.814700@1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  450. [    1.827680@1] libphy: stmmac: probed
  451. [    1.827714@1] eth0: PHY ID 01814400 at 8 IRQ POLL (stmmac-0:08) active
  452. [    1.832734@1] PPP generic driver version 2.4.2
  453. [    1.836980@1] PPP BSD Compression module registered
  454. [    1.841631@1] PPP Deflate Compression module registered
  455. [    1.846879@1] PPP MPPE Compression module registered
  456. [    1.851861@1] NET: Registered protocol family 24
  457. [    1.856676@1] usbcore: registered new interface driver asix
  458. [    1.862258@1] usbcore: registered new interface driver ax88179_178a
  459. [    1.868507@1] usbcore: registered new interface driver cdc_ether
  460. [    1.874633@1] usbcore: registered new interface driver net1080
  461. [    1.880436@1] usbcore: registered new interface driver cdc_subset
  462. [    1.886530@1] usbcore: registered new interface driver zaurus
  463. [    1.892344@1] usbcore: registered new interface driver cdc_ncm
  464. [    1.898354@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  465. [    1.904798@1] ehci-h20ahb: H20AHB-EHCI Host Controller driver
  466. [    1.910857@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  467. [    1.917376@1] usbcore: registered new interface driver cdc_acm
  468. [    1.922826@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  469. [    1.931194@1] usbcore: registered new interface driver usb-storage
  470. [    1.937506@1] usbcore: registered new interface driver usbserial
  471. [    1.944026@1] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff80000ec000
  472. [    1.954251@1] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
  473. [    1.960820@1] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff80000ee080
  474. [    1.972280@1] mousedev: PS/2 mouse device common for all mice
  475. [    1.977707@1] usbcore: registered new interface driver xpad
  476. [    1.983157@1] i2c /dev entries driver
  477. [    1.986890@1] usbcore: registered new interface driver uvcvideo
  478. [    1.992477@1] USB Video Class driver (1.1.1)
  479. [    1.997680@1] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
  480. [    2.005528@1] Bluetooth: HCI UART driver ver 2.2
  481. [    2.010062@1] Bluetooth: HCI H4 protocol initialized
  482. [    2.016363@1] @@@@@@@@@@_____2______in dia_init()
  483. [    2.019765@1] ATVR driver - init called!
  484. [    2.023835@1] usbcore: registered new interface driver usbhid
  485. [    2.029474@1] usbhid: USB HID core driver
  486. [    2.034019@1] ashmem: initialized
  487. [    2.037039@1] logger: created 256K log 'log_main'
  488. [    2.041780@1] logger: created 256K log 'log_events'
  489. [    2.046641@1] logger: created 256K log 'log_radio'
  490. [    2.051520@1] logger: created 256K log 'log_system'
  491. [    2.057310@1] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80000fa4c0
  492. [    2.063375@1] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
  493. [    2.078389@1] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
  494. [    2.081024@1] console [ttyS0] enabled
  495. [    2.081024@1] console [ttyS0] enabled
  496. [    2.088256@1] bootconsole [earlycon0] disabled
  497. [    2.088256@1] bootconsole [earlycon0] disabled
  498. [    2.097501@1] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80000fc4c0
  499. [    2.104075@1] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
  500. [    2.114119@1] hdmitx: system: hdmitx_hdcp_init
  501. [    2.117937@1] ESM HLD: Initializing...
  502. [    2.121478@1] ESM HLD: Registering device range 'esm'...
  503. [    2.126730@1] ESM HLD: Device range 'esm' has been registered.
  504. [    2.132510@1] ESM HLD: Creating class /sys/class/elliptic...
  505. [    2.138218@1] ESM HLD: The class /sys/class/elliptic has been created.
  506. [    2.144586@1] ESM HLD: Creating device 'esm'...
  507. [    2.149264@1] ESM HLD: Device 'esm' has been created.
  508. [    2.154076@1] ESM HLD: Done initializing the HLD driver.
  509. INFO:    HDCP22 key read fail!
  510. INFO:    p1d 0
  511. INFO:    pd1 0
  512. [    2.175355@1] aml_vrtc rtc.31: rtc core: registered aml_vrtc as rtc0
  513. [    2.176777@1] secmon has 1 memory regions
  514. [    2.180073@1] secmon: share in base: 0xffffff800010e000, share out base: 0xffffff800011a000
  515. [    2.188312@1] secmon secmon.4: assigned reserved memory node linux,secmon ok
  516. [    2.195300@1] secmon: probe done
  517. [    2.198814@1] storage: storage in base: 0xffffff8001800000
  518. [    2.203928@1] storage: storage out base: 0xffffff8001880000
  519. [    2.209437@1] storage: storage block base: 0xffffff8001900000
  520. [    2.215135@1] storage: probe done!
  521. [    2.219066@1] aml_sd_emmc_probe: line 3556
  522. [    2.222565@1] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
  523. [    2.232402@1] aml_sd_emmc_reg_init 1144
  524. [    2.235806@1] get property:                ocr_avail, value:0x00200080
  525. [    2.242226@1] get property:                    f_min, value:400000
  526. [    2.248337@1] get property:                    f_max, value:100000000
  527. [    2.254727@1] get property:             max_req_size, value:0x00020000
  528. [    2.261194@1] get property:                   irq_in, value:3
  529. [    2.266881@1] get property:                  irq_out, value:5
  530. [    2.272590@1] get property:                  gpio_cd, str:
  531. [    2.278008@1] get property:                  pinname, str:sd
  532. [    2.283620@1] get property:                 jtag_pin, str:
  533. [    2.289048@1] get property:                card_type, value:5
  534. [    2.294748@1] get property:                gpio_dat3, str:
  535. [    2.300194@1] sd:pdata->caps = 7
  536. [    2.303364@1] sd:pdata->caps2 = 0
  537. [    2.341210@2] [aml_is_card_insert] card OUT
  538. [    2.341296@1] [aml_is_card_insert] card OUT
  539. [    2.343911@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  540. [    2.349704@1] aml_sd_emmc_probe: line 3556
  541. [    2.354043@1] aml_sd_emmc_reg_init 1144
  542. [    2.357579@1] get property:                ocr_avail, value:0x00200080
  543. [    2.364010@1] get property:                    f_min, value:300000
  544. [    2.370129@1] get property:                    f_max, value:100000000
  545. [    2.376505@1] get property:             max_req_size, value:0x00020000
  546. [    2.382984@1] get property:                  pinname, str:emmc
  547. [    2.388754@1] get property:                card_type, value:1
  548. [    2.394459@1] get property:                gpio_dat3, str:
  549. [    2.399879@1] get property:                 hw_reset, str:
  550. [    2.405350@1] emmc:pdata->caps = c0000d47
  551. [    2.409284@1] emmc:pdata->caps2 = 18060
  552. [    2.413089@1] storage 1, boot 1
  553. [    2.416178@1] get_storage_dev return 1
  554. [    2.460014@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  555. [    2.460211@1] aml_emmc_hw_reset 1486
  556. [    2.469005@1] aml_sd_emmc_probe: line 3556
  557. [    2.469362@1] aml_sd_emmc_reg_init 1144
  558. [    2.471659@1] get property:                ocr_avail, value:0x00200080
  559. [    2.478056@1] get property:                    f_min, value:400000
  560. [    2.484186@1] get property:                    f_max, value:200000000
  561. [    2.490569@1] get property:             max_req_size, value:0x00020000
  562. [    2.497034@1] get property:                  pinname, str:sdio
  563. [    2.502816@1] get property:                card_type, value:3
  564. [    2.508543@1] sdio:pdata->caps = 7810f
  565. [    2.512215@1] sdio:pdata->caps2 = 0
  566. [    2.550038@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  567. [    2.550676@1] ion_dev has 1 memory regions
  568. [    2.557191@1] fb: osd_init_module
  569. [    2.557681@1] fb: viu vsync irq: 35
  570. [    2.561035@1] meson-fb has 1 memory regions
  571. [    2.564197@2] emmc: BKOPS_EN bit is not set
  572. [    2.569427@1] meson-fb meson-fb.16: assigned reserved memory node linux,meson-fb ok
  573. [    2.570568@2] emmc: trying cali 0-th time(s)
  574. [    2.576351@2] emmc: delay[0]= 1200 padding= 4, bidx=1
  575. [    2.576353@2] emmc: delay[1]= 1600 padding= 2, bidx=1
  576. [    2.576356@2] emmc: delay[2]= 1200 padding= 4, bidx=1
  577. [    2.576358@2] emmc: delay[3]= 1600 padding= 2, bidx=1
  578. [    2.576360@2] emmc: delay[4]= 1600 padding= 2, bidx=1
  579. [    2.576363@2] emmc: delay[5]= 1400 padding= 3, bidx=1
  580. [    2.576365@2] emmc: delay[6]= 1400 padding= 3, bidx=1
  581. [    2.576367@2] emmc: delay[7]= 1400 padding= 3, bidx=1
  582. [    2.576370@2] emmc: calibration result @ 0: max(1600), min(1200)
  583. [    2.576373@2] emmc: line_delay =0x11100202, max_cal_result =1600
  584. [    2.576375@2] emmc: base_index_max 1, base_index_min 1
  585. [    2.576382@2] emmc: clk 100000000 SDR mode tuning start
  586. [    2.576679@2] emmc: rx_tuning_result[0] = 10
  587. [    2.576961@2] emmc: rx_tuning_result[1] = 10
  588. [    2.577242@2] emmc: rx_tuning_result[2] = 10
  589. [    2.577522@2] emmc: rx_tuning_result[3] = 10
  590. [    2.577802@2] emmc: rx_tuning_result[4] = 10
  591. [    2.578084@2] emmc: rx_tuning_result[5] = 10
  592. [    2.578363@2] emmc: rx_tuning_result[6] = 10
  593. [    2.578642@2] emmc: rx_tuning_result[7] = 10
  594. [    2.578923@2] emmc: rx_tuning_result[8] = 10
  595. [    2.579202@2] emmc: rx_tuning_result[9] = 10
  596. [    2.579205@2] emmc: best_win_start =0, best_win_size =10
  597. [    2.579208@2] emmc: sd_emmc_regs->gclock=0x100024a,sd_emmc_regs->gadjust=0x2000
  598. [    2.579212@2] emmc: gclock =0x100024a, gdelay=0x11100202, gadjust=0x2000
  599. [    2.579315@2] emmc: support driver strength type 1
  600. [    2.579366@2] emmc: try set sd/emmc to DDR mode
  601. [    2.579370@2] emmc: try set sd/emmc to DDR mode
  602. [    2.579464@2] emmc: new HS400 MMC card at address 0001
  603. [    2.580110@2] emmc: clock 100000000, 8-bit-bus-width
  604. [    2.580110@2]  
  605. [    2.580111@2] mmcblk1: emmc:0001 AWPD3R 14.5 GiB
  606. [    2.580261@2] mmcblk1boot0: emmc:0001 AWPD3R partition 1 4.00 MiB
  607. [    2.580399@3] mmcblk1boot1: emmc:0001 AWPD3R partition 2 4.00 MiB
  608. [    2.580543@3] mmcblk1rpmb: emmc:0001 AWPD3R partition 3 4.00 MiB
  609. [    2.581514@2]  mmcblk1: unknown partition table
  610. [    2.582331@2] [mmc_read_partition_tbl] mmc read partition OK!
  611. [    2.582334@2] add_emmc_partition
  612. [    2.582647@2] [mmcblk1p01]           bootloader  offset 0x000000000000, size 0x000000400000
  613. [    2.582879@2] [mmcblk1p02]             reserved  offset 0x000002400000, size 0x000004000000
  614. [    2.583081@2] [mmcblk1p03]                cache  offset 0x000006c00000, size 0x000020000000
  615. [    2.583283@2] [mmcblk1p04]                  env  offset 0x000027400000, size 0x000000800000
  616. [    2.583479@2] [mmcblk1p05]                 logo  offset 0x000028400000, size 0x000002000000
  617. [    2.583676@2] [mmcblk1p06]             recovery  offset 0x00002ac00000, size 0x000002000000
  618. [    2.583877@2] [mmcblk1p07]                  rsv  offset 0x00002d400000, size 0x000000800000
  619. [    2.584085@2] [mmcblk1p08]                  tee  offset 0x00002e400000, size 0x000000800000
  620. [    2.584286@2] [mmcblk1p09]                crypt  offset 0x00002f400000, size 0x000002000000
  621. [    2.584484@2] [mmcblk1p10]                 misc  offset 0x000031c00000, size 0x000002000000
  622. [    2.584679@2] [mmcblk1p11]            instaboot  offset 0x000034400000, size 0x000020000000
  623. [    2.584905@2] [mmcblk1p12]                 boot  offset 0x000054c00000, size 0x000002000000
  624. [    2.585101@2] [mmcblk1p13]               system  offset 0x000057400000, size 0x000040000000
  625. [    2.585296@2] [mmcblk1p14]                 data  offset 0x000097c00000, size 0x00030c200000
  626. [    2.585339@2] card key: card_blk_probe.
  627. [    2.585344@2] emmc_key_init:524 emmc key lba_start:0x12020,lba_end:0x12220
  628. [    2.585348@2] emmc key: emmc_key_init:549 ok.
  629. [    2.585611@2] amlmmc_dtb_init: register dtb chardev
  630. [    2.585707@2] amlmmc_dtb_init: register dtb chardev OK
  631. [    2.585707@2] Exit aml_emmc_partition_ops OK.
  632. [    2.588036@2]  mmcblk1boot1: unknown partition table
  633. [    2.589160@2]  mmcblk1boot0: unknown partition table
  634. [    2.589505@2] clear_emmc_wait_flag
  635. [    2.925714@1] fb: osd_probe vinfo:ffffffc0020310e8
  636. [    2.930439@1] fb: init fbdev bpp is:32
  637. [    2.950794@0] fb: osd probe OK
  638. [    2.951077@0] ge2d: ge2d_init_module
  639. [    2.951765@0] ge2d: ge2d_dev major:242
  640. [    2.955855@0] ge2d: ge2d clock is 400 MHZ
  641. [    2.959438@0] ge2d: ge2d: pdev=ffffffc062075c00, irq=182, rstc=0xffffffc0622b08c0, clk=ffffffc062750b00
  642. [    2.968949@0] ge2d: mapped phy: 0xd0160000
  643. [    2.972817@0] ge2d: ge2d start monitor
  644. [    2.976769@0] ge2d: ge2d workqueue monitor start
  645. [    2.981111@1] sysled: module init
  646. [    2.984478@1] sysled: led_gpio = 228
  647. [    2.987895@1] sysled: active_low = 0
  648. [    2.991651@1] sysled: module probed ok
  649. [    2.995580@1] pwmled: module init
  650. [    2.998514@1] codec:Amlogic A/V streaming port init
  651. [    3.005200@1] codec:get gate demux control ok ffffffc060c05700
  652. [    3.009038@1] codec:get gate parser_top control ok ffffffc060834040
  653. [    3.015254@1] codec:get gate vpu_intr control ok ffffffc0608340c0
  654. [    3.021300@1] codec:get gate vdec control ok ffffffc060834140
  655. [    3.027674@1] codec:[tsync_pcr_init]init success.
  656. [    3.031640@1] codec:amvideocap_init_module
  657. [    3.035822@1] codec:amvideocap_probe,amvideocap
  658. [    3.040182@1] codec:use cma buf.
  659. [    3.043354@1] codec:amvideocap_dev_register
  660. [    3.049467@1] amvenc_avc_probe -- reserved memory config fail.
  661. [    3.053298@1] amvenc_avc - cma memory pool size: 40 MB
  662. [    3.058377@1] encode_wq_init.
  663. [    3.061307@1] encode start monitor.
  664. [    3.064895@1] encode workqueue monitor start.
  665. [    3.069526@1] jpegenc module init
  666. [    3.072734@1] codec:picdec_driver_probe called.
  667. [    3.076823@1] picdec has 1 memory regions
  668. [    3.080816@1] codec:picdec_driver_probe done.
  669. [    3.086336@1] codec:create_ge2d_work_queue video task ok
  670. [    3.090909@1] codec:used fix clk for vdec clk source!
  671. [    3.095369@1] codec:register clk_set_setting cpu[33]
  672. [    3.100525@1] vpu_init
  673. [    3.102610@1] The chip is not support hevc encoder
  674. [    3.107353@1] DI: di_module_init ok.
  675. [    3.110908@1] DI: di_module_init: major 236
  676. [    3.115338@1] DI: di_probe
  677. [    3.117919@1] deinterlace has 1 memory regions
  678. [    3.122143@1] deinterlace deinterlace.26: assigned reserved memory node linux,di ok
  679. [    3.129709@1] di_irq:78,timerc_irq:38
  680. [    3.133498@1] rdma_register, rdma_table_addr ffffff8000179000 rdma_table_addr_phy 66048000 reg_buf ffffffc0608b6000
  681. [    3.143680@1] rdma_register success, handle 1 table_size 8192
  682. [    3.149355@1] DI: di_probe allocate rdma channel 1.
  683. [    3.154195@1] DI: DI hw version 2.
  684. [    3.157557@1] 0x000000db:Y=db,U=0,V=0
  685. [    3.161178@1] 0x000000dc:Y=dc,U=0,V=0
  686. [    3.164794@1] 0x000000dd:Y=dd,U=0,V=0
  687. [    3.168416@1] 0x000000de:Y=de,U=0,V=0
  688. [    3.172066@1] 0x000000df:Y=df,U=0,V=0
  689. [    3.175662@1] 0x000000e0:Y=e0,U=0,V=0
  690. [    3.179284@1] 0x000000e1:Y=e1,U=0,V=0
  691. [    3.182913@1] 0x000000e2:Y=e2,U=0,V=0
  692. [    3.186529@1] 0x000000e3:Y=e3,U=0,V=0
  693. [    3.190158@1] 0x000000f0:Y=f0,U=0,V=0
  694. [    3.193776@1] 0x000000f1:Y=f1,U=0,V=0
  695. [    3.197396@1] 0x000000f2:Y=f2,U=0,V=0
  696. [    3.201025@1] 0x000000f3:Y=f3,U=0,V=0
  697. [    3.204642@1] 0x000000f4:Y=f4,U=0,V=0
  698. [    3.208264@1] 0x000000f5:Y=f5,U=0,V=0
  699. [    3.211893@1] 0x000000f6:Y=f6,U=0,V=0
  700. [    3.215511@1] 0x000000f7:Y=f7,U=0,V=0
  701. [    3.219132@1] 0x000000f8:Y=f8,U=0,V=0
  702. [    3.222760@1] 0x000000f9:Y=f9,U=0,V=0
  703. [    3.226376@1] 0x000000fa:Y=fa,U=0,V=0
  704. [    3.230005@1] 0x000000fb:Y=fb,U=0,V=0
  705. [    3.233622@1] 0x000000fc:Y=fc,U=0,V=0
  706. [    3.237374@1] DI: di_probe here.
  707. [    3.240846@1] efusekeynum: 4
  708. [    3.243289@1] efusekeyname:             mac  offset:     0   size:     6
  709. [    3.249668@1] efusekeyname:          mac_bt  offset:     6   size:     6
  710. [    3.256086@1] efusekeyname:        mac_wifi  offset:    12   size:     6
  711. [    3.262456@1] efusekeyname:            usid  offset:    18   size:    16
  712. [    3.269181@1] efuse efuse.10: probe OK!
  713. [    3.273031@1] key unify config unifykey-num is 14
  714. [    3.277314@1] key unify fact unifykey-num is 14
  715. [    3.281790@1] aml_unifykeys_probe:1202=============unifykey_devno:ea00000
  716. [    3.288820@1] 6unifykey: device unifykeys created ok
  717. [    3.293672@1] 6aml_unifykeys_init done!
  718. [    3.297362@1] PPMGRDRV: warn: ppmgr module init func called
  719. [    3.303045@1] PPMGRDRV: err: ppmgr_driver_probe called
  720. [    3.307971@1] ppmgr has 1 memory regions
  721. [    3.311903@1] PPMGRDRV: info: ppmgr_dev major:233
  722. [    3.316854@1] PPMGRDRV: info: ppmgr_probe done
  723. [    3.321435@1] amlogic rfkill init
  724. [    3.324288@1] enter bt_probe of_node
  725. [    3.327731@1] not get gpio_en
  726. [    3.330696@1] power on valid level is high
  727. [    3.334894@1] Bluetooth: BlueSleep Mode Driver Ver 1.2
  728. [    3.340401@1] ionvideo-000: V4L2 device registered as video13
  729. [    3.345492@1] ionvid: info: Video Technology Magazine Ion Video
  730. [    3.351389@1] ionvid: info: Capture Board ver 1.0 successfully loaded
  731. [    3.357744@1] audio_dsp: [dsp]register dsp to char divece(257)
  732. [    3.364428@1] amaudio: amaudio: driver amaudio succuess!
  733. [    3.369098@1] amlvid:err: amlvideo_init called
  734. [    3.373048@1] amlvid:err: amlvideo_create_instance called
  735. [    3.378523@1] amlvid:err: v4l2_dev.name=:amlvideo-000
  736. [    3.383779@1] amlvideo-000: V4L2 device registered as video10
  737. [    3.389615@1] vdin_drv_init: major 232
  738. [    3.393332@1] vdin_drv_init: vdin driver init done
  739. [    3.397674@1] tvafe_drv_init: major 231
  740. [    3.401870@1] tvafe: tvafe_init.
  741. [    3.404989@1] hdmirx: hdmirx_init.
  742. [    3.408021@1] ESM HLD: Initializing...
  743. [    3.411772@1] ESM HLD: Registering device range 'esm_rx'...
  744. [    3.417254@1] ESM HLD: Device range 'esm_rx' has been registered.
  745. [    3.423309@1] ESM HLD: Creating class /sys/class/elliptic_rx...
  746. [    3.429268@1] ESM HLD: The class /sys/class/elliptic_rx has been created.
  747. [    3.435905@1] ESM HLD: Creating device 'esm_rx'...
  748. [    3.440860@1] ESM HLD: Device 'esm_rx' has been created.
  749. [    3.445883@1] ESM HLD: Done initializing the HLD driver.
  750. [    3.451497@1] [viuin..]viuin_init_module viuin module init
  751. [    3.456983@1] [viuin..]viuin_probe probe ok.
  752. [    3.460936@1] module init
  753. [    3.463528@1]
  754. [    3.463528@1]  VECM probe start
  755. [    3.468515@1] aml_vecm_probe: ok
  756. [    3.472061@1] saradc c1108680.saradc: initialized by kernel, clk_div=20
  757. [    3.477893@1] saradc c1108680.saradc: calibration start:
  758. [    3.483268@1] saradc c1108680.saradc: nominal=0, value=3
  759. [    3.488474@1] saradc c1108680.saradc: nominal=256, value=249
  760. [    3.494118@1] saradc c1108680.saradc: nominal=512, value=496
  761. [    3.499688@1] saradc c1108680.saradc: nominal=768, value=742
  762. [    3.505331@1] saradc c1108680.saradc: nominal=1023, value=989
  763. [    3.510940@1] saradc c1108680.saradc: calibration end: coef=4253
  764. [    3.517127@1] remote: Driver init
  765. [    3.520276@1] remote: platform_data g_remote_ao_offset=580
  766. [    3.525578@1] remote: platform_data irq =228
  767. [    3.529829@1] remote: set drvdata completed
  768. [    3.534041@1] remote: device_create_file completed
  769. [    3.539295@1] input: aml_keypad as /devices/meson-remote.12/input/input0
  770. [    3.546048@1] remote: input_register_device completed
  771. [    3.550852@1] remote: set_remote_mode[74]
  772. [    3.554754@1] remote: remote config major:228
  773. [    3.559437@1] remote: physical address:0x60f4a000
  774. [    3.564431@1] gpio-key gpio_keypad.47: gpio_key: 0 name(power) pin()
  775. [    3.570132@1] gpio-key gpio_keypad.47: amlogic_gpio_name_map_num pin 0!::
  776. [    3.576822@1] gpio-key gpio_keypad.47: gpio_key: 0 power(147)
  777. [    3.582558@1] gpio-key gpio_keypad.47: start setup_timer
  778. [    3.587767@1] gpio-key gpio_keypad.47: power key(116) registed.
  779. [    3.593910@1] input: gpio_keypad as /devices/gpio_keypad.47/input/input1
  780. [    3.600542@1] gpio-key gpio_keypad.47: gpio keypad register input device completed.
  781. [    3.607870@1] input input1: gpio keypad major:227
  782. [    3.613962@1] Sensor: lsm303d_init
  783. [    3.616131@1] Sensor: stk8313_init
  784. [    3.619337@1] Sensor: stk831x_init
  785. [    3.622760@1] Sensor: mxc622x_acc_init
  786. [    3.626409@1] Sensor: mxc6255xc_acc_init
  787. [    3.630417@1] Sensor: l3gd20_gyr_init
  788. [    3.634895@1] aml dvb init
  789. [    3.636944@1] Amlogic Demod DVB-T/C DebugIF Init
  790. [    3.641409@1] Amlogic Demod DVB-T/C DebugIF Init ok----------------
  791. [    3.648315@1] jtag: module init
  792. [    3.650605@1] jtag: pinctrl setup apee
  793. [    3.654092@1] jtag: set state 3
  794. efuse_pw_en: 0x3
  795. WARNING! efuse bits is disabled
  796. Enable A53 JTAG to EE
  797. [    3.669510@0] jtag: module probed ok
  798. [    3.669927@0] cpuinfo: probe done
  799. [    3.671147@0] defendkey c8834500.defendkey: defendkey_devno:df00000
  800. [    3.677267@0] defendkey c8834500.defendkey: defendkey: device defendkey created ok
  801. [    3.680050@1] input input1: key 116 up
  802. [    3.688599@0] defendkey: driver init
  803. [    3.692515@0] input: cec_input as /devices/virtual/input/input2
  804. [    3.697866@0] cectx aocec: no hdmirx reg resource
  805. [    3.702406@0] cectx aocec: no hhi reg resource
  806. [    3.706699@0] cectx aocec: can't find hdmirx
  807. [    3.711880@0] cec: wake up flag:0
  808. [    3.715072@0] aml_aes_dma c883e000.aml_aes: Aml AES_dma
  809. [    3.720187@0] aml_tdes_dma c883e000.aml_tdes: Aml TDES_dma
  810. [    3.725503@0] aml_sha_dma c883e000.aml_sha: Aml SHA1/SHA224/SHA256 dma
  811. [    3.731880@0] usbcore: registered new interface driver snd-usb-audio
  812. [    3.739173@0] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe
  813. [    3.746795@0] aml_spdif_dai: enterd aml_spdif_play,set_clock:-1,sample_rate=4
  814. [    3.751599@0] aml_spdif_dai: set normal 512 fs /4 fs
  815. [    3.756217@0] aml_audio_hw: IEC958 16bit
  816. [    3.760119@0] hdmitx: audio: aout notify rate 48000
  817. [    3.764922@0] hdmitx: audio: aout notify size 16
  818. [    3.769632@0] hdmitx: audio: aout notify format CT_PCM
  819. [    3.774609@0] hdmtix: set audio
  820. [    3.777698@0] hdmitx tx_aud_src = 0
  821. [    3.781180@0] hdmitx aud_n_para = 6144
  822. [    3.784989@0] hdmitx set channel status
  823. [    3.788702@0] hdmitx: audio: Audio Type: PCM
  824. [    3.792875@0] hdmitx: audio: set audio param
  825. [    4.000251@0] aml_snd_card: headphone detection disable=1
  826. [    4.000285@0] aml_snd_card: no spk event delay time set
  827. [    4.005919@0] aml_snd_m8_card aml_m8_snd.46: T9015-audio-hifi <-> I2S.39 mapping ok
  828. [    4.013275@0] aml_snd_m8_card aml_m8_snd.46: dit-hifi <-> SPDIF.40 mapping ok
  829. [    4.020244@0] aml_snd_m8_card aml_m8_snd.46: pcm2bt-pcm <-> PCM.41 mapping ok
  830. [    4.026941@0] aml_snd_m8_card aml_m8_snd.46: ASoC: no source widget found for LOUTL
  831. [    4.034678@0] aml_snd_m8_card aml_m8_snd.46: ASoC: Failed to add route LOUTL -> direct -> Ext Spk
  832. [    4.043325@0] aml_snd_m8_card aml_m8_snd.46: ASoC: no source widget found for LOUTR
  833. [    4.051038@0] aml_snd_m8_card aml_m8_snd.46: ASoC: Failed to add route LOUTR -> direct -> Ext Spk
  834. WARNING: Unimplemented Sip Call: 0x82000035
  835. WARNING: Unimplemented Sip Call: 0x82000035
  836. [    4.172204@0] aml_snd_card: audio use jtag pinmux as i2s output, read val =ffffffff
  837. WARNING: Unimplemented Sip Call: 0x82000036
  838. [    4.184493@0] GACT probability NOT on
  839. [    4.187306@0] Mirror/redirect action on
  840. [    4.191112@0] u32 classifier
  841. [    4.193937@0]     Actions configured
  842. [    4.197476@0] Netfilter messages via NETLINK v0.30.
  843. [    4.202526@0] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  844. [    4.209039@0] ctnetlink v0.93: registering with nfnetlink.
  845. [    4.214603@0] xt_time: kernel timezone is -0000
  846. [    4.218695@0] ipip: IPv4 over IPv4 tunneling driver
  847. [    4.224088@0] ip_tables: (C) 2000-2006 Netfilter Core Team
  848. [    4.228816@0] arp_tables: (C) 2002 David S. Miller
  849. [    4.233513@0] TCP: cubic registered
  850. [    4.237056@0] Initializing XFRM netlink socket
  851. [    4.242263@0] NET: Registered protocol family 10
  852. [    4.246940@0] mip6: Mobile IPv6
  853. [    4.248989@0] ip6_tables: (C) 2000-2006 Netfilter Core Team
  854. [    4.254893@0] sit: IPv6 over IPv4 tunneling driver
  855. [    4.260753@0] NET: Registered protocol family 17
  856. [    4.263839@0] NET: Registered protocol family 15
  857. [    4.268657@0] Bridge firewalling registered
  858. [    4.272633@0] Bluetooth: RFCOMM TTY layer initialized
  859. [    4.277531@0] Bluetooth: RFCOMM socket layer initialized
  860. [    4.282816@0] Bluetooth: RFCOMM ver 1.11
  861. [    4.286831@0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  862. [    4.292103@0] Bluetooth: BNEP filters: protocol multicast
  863. [    4.297452@0] Bluetooth: BNEP socket layer initialized
  864. [    4.302670@0] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  865. [    4.308570@0] Bluetooth: HIDP socket layer initialized
  866. [    4.313728@0] l2tp_core: L2TP core driver, V2.0
  867. [    4.318278@0] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  868. [    4.323064@0] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
  869. [    4.328768@0] l2tp_netlink: L2TP netlink interface
  870. [    4.333532@0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
  871. [    4.339679@0] l2tp_debugfs: L2TP debugfs support
  872. [    4.344125@0] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
  873. [    4.350847@0] NET: Registered protocol family 35
  874. [    4.355288@0] Key type dns_resolver registered
  875. [    4.361276@0] Registering SWP/SWPB emulation handler
  876. [    4.365296@0] regulator-dummy: disabling
  877. [    4.368968@0] aml_vrtc rtc.31: setting system clock to 2015-01-01 00:00:09 UTC (1420070409)
  878. [    4.377800@0] cpufreq-scpi cpufreq-meson.7: enter  cpufreq
  879. [    4.382213@0] cpufreq-scpi cpufreq-meson.7: probe  cpufreq okay
  880. [    4.391144@0] gxbb_pm: enter meson_pm_probe!
  881. [    4.392258@0] gxbb_pm: meson_pm_probe done
  882. [    4.396987@0] cpucore_cooling_register, max_cpu_core_num:4
  883. [    4.418613@0] aml_istbt_dev_ready NULL
  884. [    4.4186v    4.423326@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
  885. [    4.426586@0] Freeing unused kernel memory: 1160K (ffffffc001e6f000 - ffffffc001f91000)
  886. modprobe: module aml_nftl_dev not found in modules.dep
  887. /dev/system is ready now.
  888. [    4.674025@0] EXT4-fs (mmcblk1p13): recovery complete
  889. [    4.674516@0] EXT4-fs (mmcblk1p13): mounted filesystem with ordered data mode. Opts: (null)
  890. [    4.838721@3] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
  891. [    4.858365@0] EXT4-fs (mmcblk1p13): re-mounted. Opts: data=ordered
  892. /etc/init.d/rc.modules: line 10: depmod: not found
  893. [    4.889883@0] mali-utgard d00c0000.mali: set min pp to default 1
  894. [    4.890274@0] mali-utgard d00c0000.mali: set min clk default to 0
  895. [    4.896370@0] mali-utgard d00c0000.mali: max clk set 5
  896. [    4.901514@0] mali-utgard d00c0000.mali: turbo clk set to 6
  897. [    4.906890@0] mali-utgard d00c0000.mali: default clk set to 2
  898. [    4.915069@0] gpu cooling register okay with err=0
  899. [    4.917586@0] gpu core cooling register okay with err=0
  900. [    4.922864@0] Mali: Mali device driver loaded
  901. [    4.963549@2] RTL871X: module init start
  902. [    4.963577@2] RTL871X: rtl8189es v4.3.18.2_17395.20160422
  903. [    4.967186@2] ######platform_wifi_power_on:
  904. [    4.971447@2] aml_wifi wifi.32: [extern_wifi_set_enable] WIFI  Disable! 240
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!