Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ...DDR Version V1.08 20220617
- LPDDR4X, 2112MHz
- channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
- channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
- channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
- channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
- Manufacturer ID:0x6
- CH0 RX Vref:31.7%, TX Vref:21.8%,22.8%
- CH1 RX Vref:30.7%, TX Vref:20.8%,20.8%
- CH2 RX Vref:31.7%, TX Vref:21.8%,21.8%
- CH3 RX Vref:33.7%, TX Vref:21.8%,20.8%
- change to F1: 528MHz
- change to F2: 1068MHz
- change to F3: 1560MHz
- change to F0: 2112MHz
- out
- U-Boot SPL 2023.01 (Feb 14 2023 - 13:51:00 +0100)
- Trying to boot from MMC1
- INFO: Preloader serial: 2
- NOTICE: BL31: v2.3():v2.3-405-gb52c2eadd:derrick.huang
- NOTICE: BL31: Built : 11:23:47, Aug 15 2022
- INFO: spec: 0x1
- INFO: ext 32k is not valid
- INFO: GICv3 without legacy support detected.
- INFO: ARM GICv3 driver initialized in EL3
- INFO: system boots from cpu-hwid-0
- INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
- INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz
- INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz
- INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz
- INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz
- INFO: BL31: Initialising Exception Handling Framework
- INFO: BL31: Initializing runtime services
- WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
- ERROR: Error initializing runtime service opteed_fast
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0xa00000
- INFO: SPSR = 0x3c9
- U-Boot 2023.01 (Feb 14 2023 - 13:51:00 +0100)
- Model: Edgeble Neu6A IO Board
- DRAM: 7.5 GiB (effective 3.7 GiB)
- Core: 71 devices, 15 uclasses, devicetree: separate
- MMC: mmc@fe2c0000: 0
- Loading Environment from nowhere... OK
- In: serial@feb50000
- Out: serial@feb50000
- Err: serial@feb50000
- Model: Edgeble Neu6A IO Board
- Net: No ethernet found.
- Hit any key to stop autoboot: 2 ... 1 ... 0
- MMC Device 1 not found
- no mmc device at slot 1
- switch to partitions #0, OK
- mmc0 is current device
- Scanning mmc 0:1...
- Found /extlinux/extlinux.conf
- Retrieving file: /extlinux/extlinux.conf
- 1:.MiniMyth2
- Retrieving file: /Image
- append: root=PARTUUID=346d1a6a-02 rw rootwait earlycon=uart8250,mmio32,0xfeb50000 console=ttyS2,1500000n8 debug MM_DEBUG="yes"
- Retrieving file: /dtbs/rockchip/rk3588-rock-5b.dtb
- Moving Image from 0x2080000 to 0x2200000, end=4140000
- ## Flattened Device Tree blob at 0a100000
- Booting using the fdt blob at 0xa100000
- Working FDT set to a100000
- Loading Device Tree to 00000000ecf0c000, end 00000000ecf1b3e5 ... OK
- Working FDT set to ecf0c000
- Starting kernel ...
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000200000-0x00000000efffffff]
- [ 0.000000] DMA32 empty
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000efffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000efffffff]
- [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
- [ 0.000000] cma: Reserved 64 MiB at 0x00000000e5000000
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.2
- [ 0.000000] percpu: Embedded 29 pages/cpu s80872 r8192 d29720 u118784
- [ 0.000000] pcpu-alloc: s80872 r8192 d29720 u118784 alloc=29*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: GIC system register CPU interface
- [ 0.000000] CPU features: detected: Virtualization Host Extensions
- [ 0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009
- [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
- [ 0.000000] alternatives: applying boot alternatives
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 967176
- [ 0.000000] Kernel command line: root=PARTUUID=346d1a6a-02 rw rootwait earlycon=uart8250,mmio32,0xfeb50000 console=ttyS2,1500000n8 debug MM_DEBUG="yes"
- [ 0.000000] Unknown kernel command line parameters "MM_DEBUG=yes", will be passed to user space.
- [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 3755968K/3930112K available (14528K kernel code, 3540K rwdata, 6420K rodata, 6784K init, 576K bss, 108608K reserved, 65536K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] ftrace: allocating 50882 entries in 199 pages
- [ 0.000000] ftrace: allocated 199 pages with 5 groups
- [ 0.000000] trace event string verifier disabled
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] .Trampoline variant of Tasks RCU enabled.
- [ 0.000000] .Rude variant of Tasks RCU enabled.
- [ 0.000000] .Tracing variant of Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: 480 SPIs implemented
- [ 0.000000] GICv3: 0 Extended SPIs implemented
- [ 0.000000] GICv3: MBI range [424:479]
- [ 0.000000] GICv3: Using MBI frame 0x00000000fe610000
- [ 0.000000] Root IRQ handler: gic_handle_irq
- [ 0.000000] GICv3: GICv3 features: 16 PPIs
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
- [ 0.000000] ITS: No ITS available, not enabling LPIs
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@100[1] /cpus/cpu@200[2] /cpus/cpu@300[3] }
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@400[4] /cpus/cpu@500[5] /cpus/cpu@600[6] /cpus/cpu@700[7] }
- [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- [ 0.001923] Console: colour dummy device 80x25
- [ 0.002378] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
- [ 0.003327] pid_max: default: 32768 minimum: 301
- [ 0.003917] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 0.004615] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 0.007872] cblist_init_generic: Setting adjustable number of callback queues.
- [ 0.008550] cblist_init_generic: Setting shift to 3 and lim to 1.
- [ 0.009288] cblist_init_generic: Setting shift to 3 and lim to 1.
- [ 0.009989] cblist_init_generic: Setting shift to 3 and lim to 1.
- [ 0.010868] rcu: Hierarchical SRCU implementation.
- [ 0.011315] rcu: .Max phase no-delay instances is 1000.
- [ 0.015133] EFI services will not be available.
- [ 0.016466] smp: Bringing up secondary CPUs ...
- [ 0.017738] Detected VIPT I-cache on CPU1
- [ 0.017826] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
- [ 0.017864] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
- [ 0.018863] Detected VIPT I-cache on CPU2
- [ 0.018950] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
- [ 0.018987] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
- [ 0.019977] Detected VIPT I-cache on CPU3
- [ 0.020082] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
- [ 0.020115] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
- [ 0.021069] CPU features: detected: Spectre-v4
- [ 0.021074] CPU features: detected: Spectre-BHB
- [ 0.021079] Detected PIPT I-cache on CPU4
- [ 0.021129] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
- [ 0.021147] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
- [ 0.022038] Detected PIPT I-cache on CPU5
- [ 0.022096] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
- [ 0.022115] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
- [ 0.023042] Detected PIPT I-cache on CPU6
- [ 0.023099] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
- [ 0.023118] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
- [ 0.023999] Detected PIPT I-cache on CPU7
- [ 0.024068] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
- [ 0.024087] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
- [ 0.024183] smp: Brought up 1 node, 8 CPUs
- [ 0.036677] SMP: Total of 8 processors activated.
- [ 0.037131] CPU features: detected: 32-bit EL0 Support
- [ 0.037606] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
- [ 0.038397] CPU features: detected: Common not Private translations
- [ 0.038973] CPU features: detected: CRC32 instructions
- [ 0.039449] CPU features: detected: RCpc load-acquire (LDAPR)
- [ 0.039978] CPU features: detected: LSE atomic instructions
- [ 0.040527] CPU features: detected: Privileged Access Never
- [ 0.041044] CPU features: detected: RAS Extension Support
- [ 0.041543] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
- [ 0.042235] spectre-bhb mitigation disabled by compile time option
- [ 0.042877] CPU: All CPU(s) started at EL2
- [ 0.043260] alternatives: applying system-wide alternatives
- [ 0.048708] devtmpfs: initialized
- [ 0.055717] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
- [ 0.056636] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
- [ 0.057919] pinctrl core: initialized pinctrl subsystem
- [ 0.058720] DMI not present or invalid.
- [ 0.059357] NET: Registered PF_NETLINK/PF_ROUTE protocol family
- [ 0.061089] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
- [ 0.062058] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
- [ 0.062961] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
- [ 0.063725] audit: initializing netlink subsys (disabled)
- [ 0.064425] audit: type=2000 audit(0.059:1): state=initialized audit_enabled=0 res=1
- [ 0.065141] thermal_sys: Registered thermal governor 'fair_share'
- [ 0.065144] thermal_sys: Registered thermal governor 'bang_bang'
- [ 0.065715] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.066275] thermal_sys: Registered thermal governor 'user_space'
- [ 0.066861] cpuidle: using governor ladder
- [ 0.067829] cpuidle: using governor menu
- [ 0.068249] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.069038] ASID allocator initialised with 65536 entries
- [ 0.069969] Serial: AMBA PL011 UART driver
- [ 0.082973] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
- [ 0.084035] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
- [ 0.084821] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
- [ 0.085801] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
- [ 0.086566] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
- [ 0.087544] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
- [ 0.088316] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
- [ 0.089292] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
- [ 0.090052] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
- [ 0.091025] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
- [ 0.093607] cryptd: max_cpu_qlen set to 1000
- [ 0.094631] ACPI: Interpreter disabled.
- [ 0.095566] iommu: Default domain type: Translated
- [ 0.096044] iommu: DMA domain TLB invalidation policy: strict mode
- [ 0.096997] SCSI subsystem initialized
- [ 0.097457] usbcore: registered new interface driver usbfs
- [ 0.097984] usbcore: registered new interface driver hub
- [ 0.098509] usbcore: registered new device driver usb
- [ 0.099203] pps_core: LinuxPPS API ver. 1 registered
- [ 0.099668] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.100527] PTP clock support registered
- [ 0.101121] arm-scmi firmware:scmi: Enabled polling mode TX channel - prot_id:16
- [ 0.101896] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
- [ 0.102540] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
- [ 0.103616] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.104639] vgaarb: loaded
- [ 0.105124] clocksource: Switched to clocksource arch_sys_counter
- [ 0.105977] pnp: PnP ACPI: disabled
- [ 0.113645] NET: Registered PF_INET protocol family
- [ 0.114238] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
- [ 0.117210] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
- [ 0.118062] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
- [ 0.118798] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
- [ 0.119786] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
- [ 0.121413] TCP: Hash tables configured (established 32768 bind 32768)
- [ 0.122093] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
- [ 0.122810] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
- [ 0.123629] NET: Registered PF_UNIX/PF_LOCAL protocol family
- [ 0.124520] RPC: Registered named UNIX socket transport module.
- [ 0.125074] RPC: Registered udp transport module.
- [ 0.125522] RPC: Registered tcp transport module.
- [ 0.125961] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.126564] NET: Registered PF_XDP protocol family
- [ 0.127016] PCI: CLS 0 bytes, default 64
- [ 0.128110] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available
- [ 0.129172] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available
- [ 0.130208] kvm [1]: IPA Size Limit: 40 bits
- [ 0.130624] kvm [1]: GICv3: no GICV resource entry
- [ 0.131072] kvm [1]: disabling GICv2 emulation
- [ 0.131502] kvm [1]: GIC system register CPU interface enabled
- [ 0.132217] kvm [1]: vgic interrupt IRQ18
- [ 0.132776] kvm [1]: VHE mode initialized successfully
- [ 0.694925] Initialise system trusted keyrings
- [ 0.695592] workingset: timestamp_bits=46 max_order=20 bucket_order=0
- [ 0.696242] zbud: loaded
- [ 0.696775] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.697612] NFS: Registering the id_resolver key type
- [ 0.698095] Key type id_resolver registered
- [ 0.698499] Key type id_legacy registered
- [ 0.698886] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 0.699513] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
- [ 0.730638] NET: Registered PF_ALG protocol family
- [ 0.731093] Key type asymmetric registered
- [ 0.731476] Asymmetric key parser 'x509' registered
- [ 0.731937] Asymmetric key parser 'pkcs8' registered
- [ 0.732401] Key type pkcs7_test registered
- [ 0.732813] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
- [ 0.733665] io scheduler mq-deadline registered
- [ 0.734089] io scheduler kyber registered
- [ 0.734476] io scheduler bfq registered
- [ 0.739840] EINJ: ACPI disabled.
- [ 0.747941] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
- [ 0.748633] dma-pl330 fea10000.dma-controller: .DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
- [ 0.750053] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
- [ 0.750732] dma-pl330 fea30000.dma-controller: .DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
- [ 0.752158] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
- [ 0.752835] dma-pl330 fed10000.dma-controller: .DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
- [ 0.754371] arm-scmi firmware:scmi: Failed. SCMI protocol 23 not active.
- [ 0.755899] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.757389] printk: console [ttyS2] disabled
- [ 0.757796] feb50000.serial: ttyS2 at MMIO 0xfeb50000 (irq = 38, base_baud = 1500000) is a 16550A
- [ 0.758685] printk: console [ttyS2] enabled
- [ 0.758685] printk: console [ttyS2] enabled
- [ 0.759425] printk: bootconsole [uart8250] disabled
- [ 0.759425] printk: bootconsole [uart8250] disabled
- [ 0.772203] Serial: AMBA driver
- [ 0.779113] rk808-regulator rk808-regulator.1.auto: there is no dvs0 gpio
- [ 0.779712] rk808-regulator rk808-regulator.1.auto: there is no dvs1 gpio
- [ 0.782971] vdd_npu_mem_s0: Bringing 500000uV into 675000-675000uV
- [ 0.784232] vdd_2v0_pldo_s3: Bringing 1975000uV into 2000000-2000000uV
- [ 0.785469] vdd_vdenc_mem_s0: Bringing 3275000uV into 950000-950000uV
- [ 0.787283] vcc_1v1_nldo_s3: Bringing 1775000uV into 1100000-1100000uV
- [ 0.789161] vdd2l_0v9_ddr_s3: Bringing 850000uV into 900000-900000uV
- [ 0.790572] avdd_0v75_s0: Bringing 850000uV into 750000-750000uV
- [ 0.791643] vdd_0v85_s0: Bringing 750000uV into 850000-850000uV
- [ 0.793621] vcc_1v8_s3: Bringing 1200000uV into 1800000-1800000uV
- [ 0.797867] rk808-regulator rk808-regulator.4.auto: there is no dvs0 gpio
- [ 0.798473] rk808-regulator rk808-regulator.4.auto: there is no dvs1 gpio
- [ 0.799165] vdd_cpu_big1_s0: Bringing 3400000uV into 1050000-1050000uV
- [ 0.800751] vdd_cpu_big0_s0: Bringing 3400000uV into 1050000-1050000uV
- [ 0.802220] vdd_cpu_lit_s0: Bringing 3400000uV into 950000-950000uV
- [ 0.803668] vcc_3v3_s3: Bringing 3400000uV into 3300000-3300000uV
- [ 0.804862] vdd_cpu_big1_mem_s0: Bringing 3400000uV into 1050000-1050000uV
- [ 0.806362] vdd_cpu_big0_mem_s0: Bringing 3400000uV into 1050000-1050000uV
- [ 0.807856] vcc_1v8_s0: Bringing 3400000uV into 1800000-1800000uV
- [ 0.809222] vdd_cpu_lit_mem_s0: Bringing 3400000uV into 950000-950000uV
- [ 0.811072] vdd_ddr_s0: Bringing 3400000uV into 850000-850000uV
- [ 0.812623] vdd_0v75_pll_s0: Bringing 3400000uV into 750000-750000uV
- [ 0.814040] vdd_ddr_pll_s0: Bringing 3400000uV into 850000-850000uV
- [ 0.815396] avdd_1v2_cam_s0: Bringing 3400000uV into 1200000-1200000uV
- [ 0.816736] avdd_1v2_s0: Bringing 3400000uV into 1200000-1200000uV
- [ 0.818043] vcc_1v8_cam_s0: Bringing 3400000uV into 1800000-1800000uV
- [ 0.819387] avdd1v8_ddr_pll_s0: Bringing 3400000uV into 1800000-1800000uV
- [ 0.820696] vdd_1v8_pll_s0: Bringing 3400000uV into 1800000-1800000uV
- [ 0.821923] vcc_3v3_sd_s0: Bringing 3400000uV into 3300000-3300000uV
- [ 0.822918] vcc_2v8_cam_s0: Bringing 3400000uV into 2800000-2800000uV
- [ 0.824061] pldo6_s3: Bringing 3400000uV into 1800000-1800000uV
- [ 0.826706] usbcore: registered new interface driver usb-storage
- [ 0.827236] usbcore: registered new interface driver ums-realtek
- [ 0.827782] usbcore: registered new interface driver usbserial_generic
- [ 0.828354] usbserial: USB Serial support registered for generic
- [ 0.829489] mousedev: PS/2 mouse device common for all mice
- [ 0.831347] sdhci: Secure Digital Host Controller Interface driver
- [ 0.831895] sdhci: Copyright(c) Pierre Ossman
- [ 0.832369] Synopsys Designware Multimedia Card Interface Driver
- [ 0.833357] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
- [ 0.833390] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 0.833980] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
- [ 0.835048] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
- [ 0.835071] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.835565] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 73,32 bit host data width,256 deep fifo
- [ 0.836195] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
- [ 0.837563] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
- [ 0.838139] hid: raw HID events driver (C) Jiri Kosina
- [ 0.838615] usbcore: registered new interface driver usbhid
- [ 0.839099] usbhid: USB HID core driver
- [ 0.841474] NET: Registered PF_PACKET protocol family
- [ 0.842186] Key type dns_resolver registered
- [ 0.845583] registered taskstats version 1
- [ 0.846041] Loading compiled-in X.509 certificates
- [ 0.846617] zswap: loaded using pool lzo/zbud
- [ 0.849888] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
- [ 0.869409] ALSA device list:
- [ 0.869675] No soundcards found.
- [ 0.870063] dw-apb-uart feb50000.serial: forbid DMA for kernel console
- [ 0.870678] Waiting for root device PARTUUID=346d1a6a-02...
- [ 2.210814] mmc0: card never left busy state
- [ 2.211195] mmc0: error -110 whilst initialising SD card
- [ 2.238244] mmc_host mmc0: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
- [ 2.288548] mmc_host mmc0: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
- ......................ˇ..ł...L.....L...H..@..........................................
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement