Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
- Channel 1: LPDDR4,50MHz
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
- 256B stride
- channel 0
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- change freq to 400MHz 0,1
- channel 0
- CS = 0
- MR0=0x98
- MR4=0x81
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x98
- MR4=0x81
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- change freq to 800MHz 1,0
- ch 0 ddrconfig = 0x101, ddrsize = 0x20
- ch 1 ddrconfig = 0x101, ddrsize = 0x20
- pmugrf_os_reg[2] = 0x3281F281, stride = 0x9
- OUT
- Boot1: 2018-04-08, version: 1.12
- CPUId = 0x0
- ChipType = 0x10, 219
- mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
- mmc: ERROR: Card did not respond to voltage select!
- emmc reinit
- mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
- mmc: ERROR: Card did not respond to voltage select!
- emmc reinit
- mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
- mmc: ERROR: Card did not respond to voltage select!
- SdmmcInit=2 1
- mmc0:cmd5,32
- SdmmcInit=0 0
- BootCapSize=0
- UserCapSize=15193MB
- FwPartOffset=2000 , 0
- StorageInit ok = 69722
- LoadTrustBL
- No find bl30.bin
- No find bl32.bin
- Load uboot, ReadLba = 2000
- Load OK, addr=0x200000, size=0xa195c
- RunBL31 0x10000
- NOTICE: BL31: v1.3(debug):65aa5ce
- NOTICE: BL31: Built : 10:47:37, Jun 19 2018
- NOTICE: BL31: Rockchip release version: v1.1
- INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
- INFO: Using opteed sec cpu_context!
- INFO: boot cpu mask: 0
- INFO: plat_rockchip_pmu_init(1151): pd status 3e
- INFO: BL31: Initializing runtime services
- WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE K
- ERROR: Error initializing runtime service opteed_fast
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0x200000
- INFO: SPSR = 0x3c9
- U-Boot 2017.09 (Aug 10 2018 - 16:43:20 -0400)
- Model: Pine64 RockPro64
- DRAM: 2 GiB
- DCDC_REG1@vdd_center: ; enabling
- DCDC_REG2@vdd_cpu_l: ; enabling
- DCDC_REG3@vcc_ddr: ; enabling (ret: -38)
- DCDC_REG4@vcc_1v8: set 1800000 uV; enabling
- LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling
- LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling
- LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling
- LDO_REG4@vcc_sd: set 3300000 uV; enabling
- LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling
- LDO_REG6@vcc_1v5: set 1500000 uV; enabling
- LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling
- LDO_REG8@vcc_3v0: set 3000000 uV; enabling
- SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38)
- SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38)
- vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38)
- dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38)
- vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38)
- vcc3v3-sys@vcc3v3_sys: set 3300000 uV; enabling (ret: -38)
- vcc-phy-regulator@vcc_phy: ; enabling (ret: -38)
- vdd-log@vdd_log: ; enabling (ret: -38)
- MMC: sdhci@fe330000: 0, dwmmc@fe320000: 1
- SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
- *** Warning - bad CRC, using default environment
- In: serial@ff1a0000
- Out: serial@ff1a0000
- Err: serial@ff1a0000
- Model: Pine64 RockPro64
- Net: eth0: ethernet@fe300000
- Hit any key to stop autoboot: 0
- Card did not respond to voltage select!
- mmc_init: -95, time 21
- switch to partitions #0, OK
- mmc1 is current device
- Scanning mmc 1:1...
- Found /extlinux/extlinux.conf
- Retrieving file: /extlinux/extlinux.conf
- reading /extlinux/extlinux.conf
- 385 bytes read in 3 ms (125 KiB/s)
- 1: ROCKPRO
- Retrieving file: /Image
- reading /Image
- 22896648 bytes read in 3630 ms (6 MiB/s)
- append: console=ttyS2,1500000n8 rw root=PARTUUID=deedbeef-02 rootwait rootfstype=ext4 panic=10 init=/sbin/init coheret
- Retrieving file: /rk3399-rockpro64.dtb
- reading /rk3399-rockpro64.dtb
- 92380 bytes read in 18 ms (4.9 MiB/s)
- ## Flattened Device Tree blob at 01f00000
- Booting using the fdt blob at 0x1f00000
- Loading Device Tree to 000000007deea000, end 000000007df038db ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 4.4.171 (adam@adam-vb) (gcc version 7.1.1 20170707 (Linaro GCC 7.1-2017.08) ) #1 SMP Tue9
- [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
- [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
- [ 0.000000] bootconsole [uart0] enabled
- INIT: version 2.88 booting
- Starting logging: OK
- Jan 18 08:50:08 RECALBOX syslog.info syslogd started: BusyBox v1.27.2
- Jan 18 08:50:08 RECALBOX user.notice kernel: klogd started: BusyBox v1.27.2 (2019-02-01 22:43:19 EST)
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] Initializing cgroup subsys cpuset
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] Initializing cgroup subsys cpu
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] Initializing cgroup subsys cpuacct
- Jan 18 08:50:08 RECALBOX user.notice kernel: [ 0.000000] Linux version 4.4.171 (adam@adam-vb) (gcc version 7.1.1 29
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (option)
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] bootconsole [uart0] enabled
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.000000] On node 0 totalpages: 523776
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.000000] DMA zone: 8184 pages used for memmap
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.000000] DMA zone: 0 pages reserved
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.000000] DMA zone: 523776 pages, LIFO batch:31
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] psci: probing for conduit method from DT.
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] psci: PSCIv1.0 detected in firmware.
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07feed000 s45800 r8196
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.000000] pcpu-alloc: s45800 r8192 d32024 u86016 alloc=21*4096
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] Detected VIPT I-cache on CPU0
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Tot2
- Jan 18 08:50:08 RECALBOX user.notice kernel: [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 3
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 )
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 b)
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] software IO TLB: mapped [mem 0x7fea5000-0x7fee5000] (0MB)
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] Memory: 2034560K/2095104K available (13822K kernel code, 20)
- Jan 18 08:50:08 RECALBOX user.notice kernel: [ 0.000000] Virtual kernel memory layout:
- Jan 18 08:50:08 RECALBOX user.notice kernel: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ()
- Jan 18 08:50:08 RECALBOX user.notice kernel: [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ()
- Jan 18 08:50:08 RECALBOX user.notice kernel: [ 0.000000] .init : 0xffffff8009350000 - 0xffffff8009460000 ()
- Jan 18 08:50:08 RECALBOX user.notice kernel: [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008e00000 ()
- Jan 18 08:50:08 RECALBOX user.notice kernel: [ 0.000000] .rodata : 0xffffff8008e00000 - 0xffffff8009350000 ()
- Jan 18 08:50:08 RECALBOX user.notice kernel: [ 0.000000] .Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0'
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.504960] rk808 0-001b: using lookup tables for GPIO lookup
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.504968] rk808 0-001b: lookup for GPIO dvs failed
- Jan 18 08:50:08 RECALBOX user.warn kernel: [ 0.504976] rk808-regulator rk808-regulator: there is no dvs0 gpio
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.504983] rk808 0-001b: GPIO lookup for consumer dvs
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.504990] rk808 0-001b: using device tree for GPIO lookup
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.504998] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property'
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.505006] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property '
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.505013] rk808 0-001b: using lookup tables for GPIO lookup
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.505019] rk808 0-001b: lookup for GPIO dvs failed
- Jan 18 08:50:08 RECALBOX user.warn kernel: [ 0.505027] rk808-regulator rk808-regulator: there is no dvs1 gpio
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.505068] rk808 0-001b: Looking up vcc1-supply from device tree
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.505133] DCDC_REG1: supplied by vcc_sys
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.505142] vcc_sys: could not add device link regulator.15 err -2
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.505638] vdd_center: 900 mV
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.506008] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from e
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.506034] vcc1v8_sdio: unable to resolve supply
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.506046] reg-fixed-voltage vcc1v8-wifi: Looking up vin-supply from e
- Jan 18 08:5Jan 18 08:50:08 RECALBOX user.warn kernel: [ 1.357863] es8316 1-0011: ASoC: Failed to create Left Hp mie
- Jan 18 08:50:08 RECALBOX user.warn kernel: [ 1.357872] es8316 1-0011: ASoC: Failed to create Right Hp mixer debugfe
- Jan 18 08:50:08 RECALBOX user.warn kernel: [ 1.357889] es8316 1-0011: ASoC: Failed to create HPCP L debugfs file
- Jan 18 08:50:08 RECALBOX user.warn kernel: [ 1.357896] es8316 1-0011: ASoC: Failed to create HPCP R debugfs file
- Jan 18 08:50:08 RECALBOX user.warn kernel: [ 1.357911] es8316 1-0011: ASoC: Failed to create HPVOL L debugfs file
- Jan 18 08:50:08 RECALBOX user.warn kernel: [ 1.357919] es8316 1-0011: ASoC: Failed to create HPVOL R debugfs file
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 1.359844] of_get_named_gpiod_flags: can't parse 'simple-audio-card,h'
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 1.359856] of_get_named_gpiod_flags: can't parse 'simple-audio-card,m'
- Jan 18 08:50:08 RECALBOX user.err kernel: [ 1.360067] rockchip-spdif ff870000.spdif: Missing dma channel for strea0
- Jan 18 08:50:08 RECALBOX user.err kernel: [ 1.360074] rockchip-spdif ff870000.spdif: ASoC: pcm constructor failed:2
- Jan 18 08:50:08 RECALBOX user.err kernel: [ 1.360081] asoc-simple-card spdif-sound: ASoC: can't create pcm ff870002
- Jan 18 08:50:08 RECALBOX user.err kernel: [ 1.360087] asoc-simple-card spdif-sound: ASoC: failed to instantiate ca2
- Jan 18 08:50:08 RECALBOX user.warn kernel: [ 1.360243] asoc-simple-card: probe of spdif-sound failed with error -22
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 1.361658] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 3500m!
- grep: /boot/config.txt: No such file or directory
- sed: /boot/config.txt: No such file or directory
- Jan 18 08:50:08 RECALBOX user.notice kernel: [ 2.203647] random: nonblocking pool is initialized
- egrep: /boot/recalbox-backup.conf: No such file or directory
- Populating /dev using udev: done
- Starting system message bus: done
- Starting network: OK
- Starting connman ... done.
- [ 59.981114] Bad mode in Error handler detected, code 0xbf000002 -- SError
- [ 59.981714] Internal error: Oops - bad mode: 0 [#1] SMP
- [ 59.982170] Modules linked in:[ 59.982308] vendor storage:20160801 ret = -1
- [ 59.982796] nvme phy_rockchip_pcie midgard_kbase dw_hdmi_i2s_audio rockchip_saradc
- [ 59.983504] CPU: 4 PID: 464 Comm: mali-mem-purge Not tainted 4.4.171 #1
- [ 59.984080] Hardware name: Pine64 RockPro64 (DT)
- [ 59.984484] task: ffffffc07ac3a880 task.stack: ffffffc078578000
- [ 59.985001] PC is at 0xf56d9bb4
- [ 59.985277] LR is at 0x0
- [ 59.985500] pc : [<00000000f56d9bb4>] lr : [<0000000000000000>] pstate: 80000010
- [ 59.986143] sp : 00000000f28fedf8
- [ 59.986433] x12: 00000000f28ff900
- [ 59.986733] x11: 00000000000ea268 x10: 00000000000ea260
- [ 59.987202] x9 : 0000000000000000 x8 : 00000000000da144
- [ 59.987671] x7 : 00000000000000a2 x6 : 00000000000d9eb0 [ 59.988044] CFG80211-ERROR) wl_setup_wiphy : Registerin1
- [ 59.988631] CFG80211-ERROR) wl_init_prof : wl_init_prof: No profile
- [ 59.988791] wl_escan_attach: Enter
- [ 59.988836] wl_escan_init: Enter
- [ 59.988892] wl_create_event_handler(): thread:wl_escan_handler:1de started
- [ 59.988896] tsk Enter, tsk = 0xffffffc077d301b0
- [ 59.989912] dhd_init_logstrs_array: Failed to open the file /installmedia/logstrs.bin
- [ 59.990069] dhd_attach(): thread:dhd_watchdog_thread:1df started
- [ 59.990121] dhd_attach(): thread:dhd_dpc:1e0 started
- [ 59.990175] dhd_attach(): thread:dhd_rxf:1e1 started
- [ 59.990182] dhd_deferred_work_init: work queue initialized
- [ 59.990202] dhd_bus_set_default_min_res_mask: Unhandled chip id
- [ 59.990405] sdioh_cis_read: func_cis_ptr[0]=0x10ac
- [ 59.994279]
- [ 59.994429] x5 : 00000000f28fee08 x4 : 0000000000000000
- [ 59.994898] x3 : 0000000000000000 x2 : 00000000f28ff4c4
- [ 59.995367] x1 : 0000000000000000 x0 : 0000000000000000
- [ 59.995835]
- [ 59.995969] Process mali-mem-purge (pid: 464, stack limit = 0xffffffc078578000)
- [ 59.997045] ---[ end trace 29f657a33836ba39 ]---
- [ 60.003641] Dongle Host Driver, version 1.579.77.41.9 (r)
- [ 60.004490] wl_ext_iapsta_attach_netdev: bssidx=0
- [ 60.004932] Register interface [wlan0] MAC: ac:83:f3:e6:1f:b2
- [ 60.004932]
- [ 60.005722] dhd_wl_ioctl: returning as busstate=0
- [ 60.006190] dhd_dbg_detach_pkt_monitor, 2204
- [ 60.006569] dhd_bus_devreset: == Power OFF ==
- [ 60.007233] bcmsdh_oob_intr_unregister: Enter
- [ 60.007616] bcmsdh_oob_intr_unregister: irq is not registered
- [ 60.008176] dhd_txglom_enable: enable 0
- [ 60.008516] dhd_conf_set_txglom_params: txglom_mode=copy
- [ 60.009007] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0
- [ 60.009586] dhd_conf_set_txglom_params: tx_in_rx=1, txinrx_thres=128, dhd_txminmax=-1
- [ 60.010276] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300
- [ 60.010883] dhd_bus_devreset: WLAN OFF DONE
- [ 60.011548] wifi_platform_set_power = 0
- [ 60.011914] ======== PULL WL_REG_ON(-1) LOW! ========
- [ 60.012358] [WLAN_RFKILL]: rockchip_wifi_power: 0
- [ 60.012784] [WLAN_RFKILL]: wifi shut off power.
- [ 60.013199] dhdsdio_probe : the lock is released.
- [ 60.013961] bcmsdh_sdmmc: probe of mmc2:0001:3 failed with error -110
- [ 60.014619] dhd_module_init: Exit err=0
- [ 60.085964] Bad mode in Error handler detected, code 0xbf000002 -- SError
- [ 60.086564] Internal error: Oops - bad mode: 0 [#2] SMP
- [ 60.087021] Modules linked in: nvme phy_rockchip_pcie midgard_kbase dw_hdmi_i2s_audio rockchip_saradc
- [ 60.087858] CPU: 4 PID: 482 Comm: crda Tainted: G D 4.4.171 #1
- [ 60.088463] Hardware name: Pine64 RockPro64 (DT)
- [ 60.088868] task: ffffffc077c68d80 task.stack: ffffffc077c88000
- [ 60.089384] PC is at 0xf7319a50
- [ 60.089660] LR is at 0xf73049cc
- [ 60.089935] pc : [<00000000f7319a50>] lr : [<00000000f73049cc>] pstate: 60000010
- [ 60.090577] sp : 00000000ff942910
- [ 60.090868] x12: 0000000000000000
- [ 60.091169] x11: 00000000ff942aa4 x10: 00000000ff942b1c
- [ 60.091637] x9 : 0000000000000002 x8 : 00000000f732c158
- [ 60.092106] x7 : 0000000000000003 x6 : 00000000f72fd0e8
- [ 60.092575] x5 : 00000000ff942950 x4 : 00000000f732c000
- [ 60.093044] x3 : 00000000f72fd0e8 x2 : 0000000000000000
- [ 60.093512] x1 : 0000000000000000 x0 : 00000000f72fd0e8
- [ 60.093982]
- [ 60.094115] Process crda (pid: 482, stack limit = 0xffffffc077c88000)
- [ 60.094700] ---[ end trace 29f657a33836ba3a ]---
- [ 60.096712] udevd[279]: '/sbin/crda' [482] terminated by signal 11 (Segmentation fault)
- [ 88.133816] Watchdog detected hard LOCKUP on cpu 1
- [ 88.134240] ------------[ cut here ]------------
- [ 88.134667] WARNING: at kernel/watchdog.c:352
- [ 88.135048] Modules linked in: nvme phy_rockchip_pcie midgard_kbase dw_hdmi_i2s_audio rockchip_saradc
- [ 88.135880]
- [ 88.136021] CPU: 0 PID: 488 Comm: parted Tainted: G D 4.4.171 #1
- [ 88.136644] Hardware name: Pine64 RockPro64 (DT)
- [ 88.137050] task: ffffffc07c6bb600 task.stack: ffffffc0795b0000
- [ 88.137578] PC is at watchdog_timer_fn+0x190/0x2e8
- [ 88.138000] LR is at watchdog_timer_fn+0x190/0x2e8
- [ 88.138421] pc : [<ffffff800812c904>] lr : [<ffffff800812c904>] pstate: 600001c5
- [ 88.139065] sp : ffffffc07fef0df0
- [ 88.139356] x29: ffffffc07fef0df0 x28: 0000000000000001
- [ 88.139829] x27: ffffff8009467720 x26: ffffff8009431238
- [ 88.140303] x25: ffffffc07fef3250 x24: ffffffc0795b3af0
- [ 88.140774] x23: 0000000000000000 x22: 000000000000003b
- [ 88.141246] x21: ffffff8009466000 x20: ffffff80094312b0
- [ 88.141717] x19: ffffff8009431000 x18: 0000000000000005
- [ 88.142189] x17: 0000000000000000 x16: 0000000000000000
- [ 88.142660] x15: 0000000000000000 x14: 000000000000000a
- [ 88.143132] x13: ffffff808965d867 x12: 0000000000000030
- [ 88.143604] x11: 0000000000000006 x10: ffffff800965d86f
- [ 88.144075] x9 : 0000000005f5e0ff x8 : 4c20647261682064
- [ 88.144547] x7 : 6574636574656420 x6 : ffffff800965d89d
- [ 88.145018] x5 : 00000000fffffffe x4 : 0000000000000002
- [ 88.145490] x3 : 0000004076ac2000 x2 : 0000004076ac2000
- [ 88.145961] x1 : 0000000000000000 x0 : 0000000000000026
- [ 88.146434]
- [ 88.146434] PC: 0xffffff800812c884:
- [ 88.146869] c884 91022694 d538d080 38746801 34000041 3834681f 97ffff7a a94153f3 52800020
- [ 88.147620] c8a4 a9425bf5 a94363f7 a9446bf9 a94573fb a8c77bfd d65f03c0 91020282 f87a6860
- [ 88.148373] c8c4 f8626865 91022294 eb05001f 54000101 38746860 35fffb80 b9403082 90008180
- [ 88.149124] c8e4 9110b800 340000c2 9400d226 f8226860 f87c7b60 3834681f 17ffffd3 9400d2b0
- [ 88.149876] c904 d4210000 f87c7b60 52800021 38346801 17ffffcd 97fe78d5 f9438aa1 36080941
- [ 88.150629] c924 b9401341 910003e2 340008e1 531f7821 d35efc00 8b21c2c1 cb000021 b6f80841
- [ 88.151382] c944 6b160016 54000800 91022a99 d538d080 38606b21 34000101 91024294 f8746802
- [ 88.152131] c964 d5384101 eb01005f 54fff980 3839681f 17ffffc9 34000157 9000acc1 52800000
- [ 88.152884]
- [ 88.152884] LR: 0xffffff800812c884:
- [ 88.153319] c884 91022694 d538d080 38746801 34000041 3834681f 97ffff7a a94153f3 52800020
- [ 88.154072] c8a4 a9425bf5 a94363f7 a9446bf9 a94573fb a8c77bfd d65f03c0 91020282 f87a6860
- [ 88.154825] c8c4 f8626865 91022294 eb05001f 54000101 38746860 35fffb80 b9403082 90008180
- [ 88.155578] c8e4 9110b800 340000c2 9400d226 f8226860 f87c7b60 3834681f 17ffffd3 9400d2b0
- [ 88.156331] c904 d4210000 f87c7b60 52800021 38346801 17ffffcd 97fe78d5 f9438aa1 36080941
- [ 88.157080] c924 b9401341 910003e2 340008e1 531f7821 d35efc00 8b21c2c1 cb000021 b6f80841
- [ 88.157832] c944 6b160016 54000800 91022a99 d538d080 38606b21 34000101 91024294 f8746802
- [ 88.158583] c964 d5384101 eb01005f 54fff980 3839681f 17ffffc9 34000157 9000acc1 52800000
- [ 88.159336]
- [ 88.159336] SP: 0xffffffc07fef0d70:
- [ 88.159771] 0d70 0000003b 00000000 00000000 00000000 795b3af0 ffffffc0 7fef3250 ffffffc0
- [ 88.160522] 0d90 09431238 ffffff80 09467720 ffffff80 00000001 00000000 7fef0df0 ffffffc0
- [ 88.161275] 0db0 0812c904 ffffff80 7fef0df0 ffffffc0 0812c904 ffffff80 600001c5 00000000
- [ 88.162026] 0dd0 09466710 ffffff80 00000002 00000000 00000000 00000080 7d400028 ffffffc0
- [ 88.162778] 0df0 7fef0e60 ffffffc0 08103308 ffffff80 7fef3250 ffffffc0 7fef2c00 ffffffc0
- [ 88.163531] 0e10 804ee840 00000014 7fef2c80 ffffffc0 0942b000 ffffff80 00000001 00000000
- [ 88.164283] 0e30 09618b18 ffffff80 804ee840 00000014 0812c774 ffffff80 7c6bb600 ffffffc0
- [ 88.165034] 0e50 7fef3250 ffffffc0 09466710 ffffff80 7fef0ed0 ffffffc0 081038ec ffffff80
- [ 88.165791]
- [ 88.165791] X6: 0xffffff800965d81d:
- [ 88.166226] d81c 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.166977] d83c 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.167727] d85c 00000000 00000001 00000000 30303020 32303330 32373730 64205d37 20633538
- [ 88.168480] d87c 312e3838 39373536 58205d31 30203a36 66666678 38666666 36393030 31386435
- [ 88.169233] d89c 300a3a64 32313830 34303963 70205d3e 74617473 36203a65 30303030 0a356331
- [ 88.169984] d8bc 6c756166 350a2974 30303030 48303030 6964205a 203d2076 620a2930 30207375
- [ 88.170737] d8dc 66312d30 690a295d 2874696e 73203b29 65636375 69207373 6974696e 7020676e
- [ 88.171490] d8fc 7265776f 646f6d5f 735f6c65 6c706d69 300a2e65 30303038 20303030 7830202d
- [ 88.172244] d91c 66666666 64626666 66666662 30303030 28202020 32202020 47203634 5b0a2942
- [ 88.172999]
- [ 88.172999] X10: 0xffffff800965d7ef:
- [ 88.173440] d7ec 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.174192] d80c 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.174941] d82c 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.175693] d84c 00000000 00000000 00000000 00000000 00000000 00000001 00000000 30303020
- [ 88.176444] d86c 312e3838 34343638 64205d34 20633638 312e3838 39393237 58205d39 203a3031
- [ 88.177198] d88c 66667830 66666666 39303038 37643536 0a3a6665 32313830 34303963 70205d3e
- [ 88.177947] d8ac 74617473 36203a65 30303030 0a356331 6c756166 350a2974 30303030 48303030
- [ 88.178700] d8cc 6964205a 203d2076 620a2930 30207375 66312d30 690a295d 2874696e 73203b29
- [ 88.179452] d8ec 65636375 69207373 6974696e 7020676e 7265776f 646f6d5f 735f6c65 6c706d69
- [ 88.180203]
- [ 88.180203] X13: 0xffffff808965d7e7:
- [ 88.180646] d7e4 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.181400] d804 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.182151] d824 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.182905] d844 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.183658] d864 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.184410] d884 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.185162] d8a4 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.185917] d8c4 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.186670] d8e4 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.187424]
- [ 88.187424] X19: 0xffffff8009430f80:
- [ 88.187867] 0f80 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.188623] 0fa0 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.189378] 0fc0 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.190130] 0fe0 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.190882] 1000 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.191636] 1020 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.192390] 1040 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.193145] 1060 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.193900]
- [ 88.193900] X20: 0xffffff8009431230:
- [ 88.194343] 1230 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.195095] 1250 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.195850] 1270 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.196602] 1290 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.197355] 12b0 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.198108] 12d0 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.198862] 12f0 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.199615] 1310 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.200370]
- [ 88.200370] X21: 0xffffff8009465f80:
- [ 88.200813] 5f80 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.201565] 5fa0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.202316] 5fc0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.203066] 5fe0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.203818] 6000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.204567] 6020 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.205318] 6040 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.206070] 6060 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.206823]
- [ 88.206823] X24: 0xffffffc0795b3a70:
- [ 88.207266] 3a70 ffffffff 7fffffff 795b3bc8 ffffffc0 00000002 00000000 00000040 00000000
- [ 88.208019] 3a90 7c2373a0 ffffffc0 7c1e3c00 ffffffc0 795b3ad0 ffffffc0 083a117c ffffff80
- [ 88.208772] 3ab0 7c399658 ffffffc0 7c1e3c00 ffffffc0 795b3af0 ffffffc0 08de8bf8 ffffff80
- [ 88.209525] 3ad0 795b3af0 ffffffc0 08de8d28 ffffff80 00000140 00000000 00000002 00000000
- [ 88.210276] 3af0 00000003 00000000 09438c58 ffffff80 00000000 00000000 00000000 00000000
- [ 88.211028] 3b10 00000004 00000000 00000030 00000000 07c8eba9 0000000e 00000001 00000000
- [ 88.211778] 3b30 7c6bbff0 ffffffc0 795b39c0 ffffffc0 00000100 00000000 0960d000 ffffff80
- [ 88.212531] 3b50 00000000 00000000 00000000 00000000 00000001 00000000 00000001 00000000
- [ 88.213285]
- [ 88.213285] X25: 0xffffffc07fef31d0:
- [ 88.213727] 31d0 ffffffff 00000000 ffffffff ffffffff 00000001 00000000 7fef7a00 ffffffc0
- [ 88.214479] 31f0 7fef7a00 ffffffc0 7fef31f8 ffffffc0 7fef31f8 ffffffc0 0812b37c ffffff80
- [ 88.215232] 3210 7d097cf8 ffffffc0 7d097c50 ffffffc0 00020002 00000000 00000000 00000000
- [ 88.215985] 3230 00000001 00000000 00000009 00000000 00000002 00000000 7d0e0000 ffffffc0
- [ 88.216737] 3250 7fef3250 ffffffc0 7fef30c0 ffffffc0 00000000 00000000 804ee500 00000014
- [ 88.217487] 3270 804ee500 00000014 0812c774 ffffff80 7fef2c80 ffffffc0 00000000 0000000a
- [ 88.218239] 3290 0812c748 ffffff80 63746177 676f6468 0000302f 00000000 00000000 00000000
- [ 88.218991] 32b0 00000000 00000000 00000000 00000000 00000000 00000000 00000001 00000000
- [ 88.219744]
- [ 88.219744] X26: 0xffffff80094311b8:
- [ 88.220186] 11b8 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.220938] 11d8 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.221690] 11f8 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.222441] 1218 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.223193] 1238 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.223946] 1258 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.224699] 1278 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.225453] 1298 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.226208]
- [ 88.226208] X27: 0xffffff80094676a0:
- [ 88.226650] 76a0 00000001 00000000 00000001 00000000 000003e8 00000000 7ff6b480 ffffffc0
- [ 88.227402] 76c0 00000015 00000000 7ff6b440 ffffffc0 00000001 00000006 00000060 00000000
- [ 88.228155] 76e0 00015000 00001000 00000001 00000000 7ff6b4c0 ffffffc0 7ff6d980 ffffffc0
- [ 88.228907] 7700 00000000 00000005 00000010 00000000 7ff6b340 ffffffc0 7feed000 ffffffc0
- [ 88.229660] 7720 76ac2000 00000040 76ad7000 00000040 76aec000 00000040 76b01000 00000040
- [ 88.230412] 7740 76b16000 00000040 76b2b000 00000040 00000000 00000000 00000000 00000000
- [ 88.231164] 7760 00000002 00000000 00003659 00000000 00010000 00000000 0007ffff 00000000
- [ 88.231916] 7780 0000f755 00000000 00002000 00000000 00000000 0000fffa 00000000 00000000
- [ 88.232667]
- [ 88.232667] X29: 0xffffffc07fef0d70:
- [ 88.233110] 0d70 0000003b 00000000 00000000 00000000 795b3af0 ffffffc0 7fef3250 ffffffc0
- [ 88.233860] 0d90 09431238 ffffff80 09467720 ffffff80 00000001 00000000 7fef0df0 ffffffc0
- [ 88.234611] 0db0 0812c904 ffffff80 7fef0df0 ffffffc0 0812c904 ffffff80 600001c5 00000000
- [ 88.235363] 0dd0 09466710 ffffff80 00000002 00000000 00000000 00000080 7d400028 ffffffc0
- [ 88.236114] 0df0 7fef0e60 ffffffc0 08103308 ffffff80 7fef3250 ffffffc0 7fef2c00 ffffffc0
- [ 88.236866] 0e10 804ee840 00000014 7fef2c80 ffffffc0 0942b000 ffffff80 00000001 00000000
- [ 88.237619] 0e30 09618b18 ffffff80 804ee840 00000014 0812c774 ffffff80 7c6bb600 ffffffc0
- [ 88.238371] 0e50 7fef3250 ffffffc0 09466710 ffffff80 7fef0ed0 ffffffc0 081038ec ffffff80
- [ 88.239124]
- [ 88.239258] ---[ end trace 29f657a33836ba3b ]---
- [ 88.239664] Call trace:
- [ 88.239883] Exception stack(0xffffffc07fef0c20 to 0xffffffc07fef0d50)
- [ 88.240448] 0c20: ffffff8009431000 0000008000000000 ffffffc07fef0df0 ffffff800812c904
- [ 88.241133] 0c40: 0000000000000026 0000000000000000 ffffffc07fef0cf0 ffffff80080ee260
- [ 88.241817] 0c60: ffffffc07fef0d70 ffffff800915c42e ffffff8009466000 000000000000003b
- [ 88.242502] 0c80: 0000000000000000 ffffffc0795b3af0 ffffffc07fef3250 ffffff8009431238
- [ 88.243187] 0ca0: ffffff8009467720 0000000000000001 ffffffc07c27c000 ffffff800942b000
- [ 88.243872] 0cc0: 0000000000000026 0000000000000000 0000004076ac2000 0000004076ac2000
- [ 88.244556] 0ce0: 0000000000000002 00000000fffffffe ffffff800965d89d 6574636574656420
- [ 88.245239] 0d00: 4c20647261682064 0000000005f5e0ff ffffff800965d86f 0000000000000006
- [ 88.245924] 0d20: 0000000000000030 ffffff808965d867 000000000000000a 0000000000000000
- [ 88.246607] 0d40: 0000000000000000 0000000000000000
- [ 88.247039] [<ffffff800812c904>] watchdog_timer_fn+0x190/0x2e8
- [ 88.247553] [<ffffff8008103308>] __hrtimer_run_queues+0x1bc/0x284
- [ 88.248088] [<ffffff80081038ec>] hrtimer_interrupt+0xac/0x1bc
- [ 88.248596] [<ffffff8008affef0>] arch_timer_handler_phys+0x38/0x50
- [ 88.249140] [<ffffff80080f370c>] handle_percpu_devid_irq+0xe8/0x178
- [ 88.249690] [<ffffff80080eeecc>] generic_handle_irq+0x2c/0x44
- [ 88.250194] [<ffffff80080ef248>] __handle_domain_irq+0xb4/0xb8
- [ 88.250707] [<ffffff8008080e6c>] gic_handle_irq+0xc4/0x17c
- [ 88.251187] Exception stack(0xffffffc0795b3af0 to 0xffffffc0795b3c20)
- [ 88.251751] 3ae0: 0000000000000003 ffffff8009438c58
- [ 88.252435] 3b00: 0000000000000000 0000000000000000 0000000000000004 0000000000000030
- [ 88.253120] 3b20: 0000000e07c8eba9 0000000000000001 ffffffc07c6bbff0 ffffffc0795b39c0
- [ 88.253804] 3b40: 0000000000000100 ffffff800960d000 0000000000000000 0000000000000000
- [ 88.254489] 3b60: 0000000000000001 0000000000000001 0000000000000000 0000000000000000
- [ 88.255173] 3b80: 0000000000000000 ffffffc07ff4ec58 ffffff80094666b4 ffffffc07fef8048
- [ 88.255858] 3ba0: 0000000000000004 ffffff8009467720 ffffff80081d78d8 0000000000000000
- [ 88.256543] 3bc0: ffffff8009467000 ffffff80094666b4 ffffff8009467720 ffffffc0795b3c20
- [ 88.257227] 3be0: ffffff8008115d1c ffffffc0795b3c20 ffffff80081154b0 0000000020000145
- [ 88.257912] 3c00: ffffffc07fef8048 ffffff8009466000 0000008000000000 0000000000000008
- [ 88.258597] [<ffffff80080827b4>] el1_irq+0xb4/0x140
- [ 88.259028] [<ffffff80081154b0>] csd_lock_wait+0x30/0x38
- [ 88.259496] [<ffffff8008115d1c>] smp_call_function_many+0x258/0x280
- [ 88.260045] [<ffffff8008115e78>] on_each_cpu_mask+0x50/0x90
- [ 88.260534] [<ffffff8008115f50>] on_each_cpu_cond+0x98/0xd8
- [ 88.261024] [<ffffff80081d6dcc>] invalidate_bh_lrus+0x34/0x3c
- [ 88.261530] [<ffffff80081db4dc>] invalidate_bdev+0x2c/0x4c
- [ 88.262016] [<ffffff80083955b0>] blkdev_ioctl+0x3ac/0x874
- [ 88.262492] [<ffffff80083a3374>] compat_blkdev_ioctl+0xc4/0x1460
- [ 88.263020] [<ffffff80081f3148>] compat_SyS_ioctl+0x1e8/0xc90
- [ 88.263525] [<ffffff8008082f30>] el0_svc_naked+0x24/0x28
- [ 88.263992] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [parted:488]
- [ 88.264621] Modules linked in: nvme phy_rockchip_pcie midgard_kbase dw_hdmi_i2s_audio rockchip_saradc
- [ 88.265448]
- [ 88.265586] CPU: 0 PID: 488 Comm: parted Tainted: G D W 4.4.171 #1
- [ 88.266208] Hardware name: Pine64 RockPro64 (DT)
- [ 88.266613] task: ffffffc07c6bb600 task.stack: ffffffc0795b0000
- [ 88.267132] PC is at csd_lock_wait+0x30/0x38
- [ 88.267509] LR is at smp_call_function_many+0x258/0x280
- [ 88.267966] pc : [<ffffff80081154b0>] lr : [<ffffff8008115d1c>] pstate: 20000145
- [ 88.268610] sp : ffffffc0795b3c20
- [ 88.268902] x29: ffffffc0795b3c20 x28: ffffff8009467720
- [ 88.269374] x27: ffffff80094666b4 x26: ffffff8009467000
- [ 88.269846] x25: 0000000000000000 x24: ffffff80081d78d8
- [ 88.270317] x23: ffffff8009467720 x22: 0000000000000004
- [ 88.270789] x21: ffffffc07fef8048 x20: ffffff80094666b4
- [ 88.271260] x19: ffffffc07ff4ec58 x18: 0000000000000000
- [ 88.271732] x17: 0000000000000000 x16: 0000000000000000
- [ 88.272203] x15: 0000000000000001 x14: 0000000000000001
- [ 88.272674] x13: 0000000000000000 x12: 0000000000000000
- [ 88.273146] x11: ffffff800960d000 x10: 0000000000000100
- [ 88.273619] x9 : ffffffc0795b39c0 x8 : ffffffc07c6bbff0
- [ 88.274091] x7 : 0000000000000001 x6 : 0000000e07c8eba9
- [ 88.274562] x5 : 0000000000000030 x4 : 0000000000000004
- [ 88.275033] x3 : 0000000000000000 x2 : 0000000000000000
- [ 88.275504] x1 : ffffff8009438c58 x0 : 0000000000000003
- [ 88.275976]
- [ 88.275976] PC: 0xffffff8008115430:
- [ 88.276411] 5430 51000e80 2a1a03e6 7100081f aa1903e4 7a4c8a84 2a1803e2 9a9f02c5 2a1503e1
- [ 88.277162] 5450 aa1703e0 97fffc81 a94153f3 a9425bf5 a94363f7 a9446bf9 a8c77bfd d65f03c0
- [ 88.277915] 5470 928001a0 17fffff9 928002a0 17fffff7 a9be7bfd 910003fd f9000bf3 aa0003f3
- [ 88.278666] 5490 aa1e03e0 d503201f 91006260 88dffc00 37000080 f9400bf3 a8c27bfd d65f03c0
- [ 88.279419] 54b0 d503203f 17fffff9 a9bf7bfd 910003fd aa1e03e0 d503201f a8c17bfd d65f03c0
- [ 88.280172] 54d0 a9be7bfd 910003fd f9000bf3 aa0003f3 aa1e03e0 d503201f b9401a60 37000040
- [ 88.280924] 54f0 d4210000 52800000 91006261 889ffc20 f9400bf3 a8c27bfd d65f03c0 a9bd7bfd
- [ 88.281676] 5510 910003fd a90153f3 a9025bf5 12001c16 aa1e03e0 d503201f d53b4220 37380040
- [ 88.282427]
- [ 88.282427] LR: 0xffffff8008115c9c:
- [ 88.282862] 5c9c 911c82f7 1400001f 93407c03 911c8342 f9400261 f8637840 8b000021 a90687a3
- [ 88.283613] 5cbc aa0103e0 97fffdf0 f9403ba1 b9401820 32000000 b9001820 d5033abf f94037a3
- [ 88.284366] 5cdc 34000097 b9401820 321f0000 b9001820 f9403fa0 a900e438 91000002 f8637b80
- [ 88.285119] 5cfc 8b000042 aa0103e0 940a86fd 17ffffd6 f860dae0 f9400261 8b000020 97fffdda
- [ 88.285872] 5d1c 110006c2 d2800101 93407c42 aa1503e0 940a86c9 2a0003f6 b9400281 6b00003f
- [ 88.286624] 5d3c 54fffe8c 17ffffac a9bd7bfd 910003fd a90153f3 f90013f5 aa0003f3 aa0103f4
- [ 88.287374] 5d5c 2a0203f5 aa1e03e0 d503201f d0006780 710002bf 1a9f07e3 aa1403e2 f944e400
- [ 88.288127] 5d7c aa1303e1 97ffff51 52800000 f94013f5 a94153f3 a8c37bfd d65f03c0 a9bd7bfd
- [ 88.288880]
- [ 88.288880] SP: 0xffffffc0795b3ba0:
- [ 88.289314] 3ba0 00000004 00000000 09467720 ffffff80 081d78d8 ffffff80 00000000 00000000
- [ 88.290066] 3bc0 09467000 ffffff80 094666b4 ffffff80 09467720 ffffff80 795b3c20 ffffffc0
- [ 88.290817] 3be0 08115d1c ffffff80 795b3c20 ffffffc0 081154b0 ffffff80 20000145 00000000
- [ 88.291570] 3c00 7fef8048 ffffffc0 09466000 ffffff80 00000000 00000080 00000008 00000000
- [ 88.292323] 3c20 795b3c40 ffffffc0 08115d1c ffffff80 7fef8040 ffffffc0 08115d30 ffffff80
- [ 88.293073] 3c40 795b3cc0 ffffffc0 08115e78 ffffff80 081d78d8 ffffff80 00000000 00000000
- [ 88.293826] 3c60 00000000 00000000 795b3d68 ffffffc0 00000001 00000000 081d78d8 ffffff80
- [ 88.294577] 3c80 00000001 00000000 09465588 ffffff80 081d6798 ffffff80 7c6bb600 ffffffc0
- [ 88.295332]
- [ 88.295332] X1: 0xffffff8009438bd8:
- [ 88.295766] 8bd8 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.296520] 8bf8 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.297271] 8c18 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.298024] 8c38 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.298777] 8c58 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.299530] 8c78 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.300283] 8c98 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.301036] 8cb8 ******** ******** ******** ******** ******** ******** ******** ********
- [ 88.301791]
- [ 88.301791] X8: 0xffffffc07c6bbf70:
- [ 88.302226] bf70 00000000 00000000 00000000 00000000 00000000 00000000 00000001 00000000
- [ 88.302977] bf90 0946d710 ffffff80 7c6bb600 ffffffc0 0946d710 ffffff80 0942b000 ffffff80
- [ 88.303729] bfb0 7ac66d80 ffffffc0 09435000 ffffff80 7fef7080 ffffffc0 00000000 00000000
- [ 88.304480] bfd0 09467000 ffffff80 7c6bbc68 ffffffc0 795b39c0 ffffffc0 795b39c0 ffffffc0
- [ 88.305233] bff0 080856f4 ffffff80 f72ee4d0 00000000 00000000 00000000 00000000 00000000
- [ 88.305986] c010 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.306736] c030 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.307489] c050 0000b302 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.308242]
- [ 88.308242] X9: 0xffffffc0795b3940:
- [ 88.308677] 3940 7c6bb680 ffffffc0 7c6bb600 ffffffc0 00000000 00000000 0942b000 ffffff80
- [ 88.309428] 3960 795b3980 ffffffc0 08de8d58 ffffff80 7fef7080 ffffffc0 00000000 00000000
- [ 88.310181] 3980 795b39a0 ffffffc0 080c20b0 ffffff80 7fef7080 ffffffc0 09435000 ffffff80
- [ 88.310933] 39a0 795b39e0 ffffffc0 08de5914 ffffff80 7fef7080 ffffffc0 7c6bb600 ffffffc0
- [ 88.311684] 39c0 0946d710 ffffff80 0942b000 ffffff80 7ac66d80 ffffffc0 09435000 ffffff80
- [ 88.312435] 39e0 795b3a40 ffffffc0 08de5bf8 ffffff80 ffffffff 7fffffff 00000000 00000000
- [ 88.313187] 3a00 ffffffff 7fffffff 795b3bc8 ffffffc0 08de5540 ffffff80 00000040 00000000
- [ 88.313937] 3a20 08de6394 ffffff80 c1ff1240 ffffffbd 08e04000 ffffff80 7c6bb600 ffffffc0
- [ 88.314690]
- [ 88.314690] X11: 0xffffff800960cf80:
- [ 88.315133] cf80 081802ac ffffff80 0817fd2c ffffff80 081488c4 ffffff80 09364094 ffffff80
- [ 88.315886] cfa0 00000000 00000000 7ce1dba0 ffffffc0 7ce1db40 ffffffc0 0814862c ffffff80
- [ 88.316637] cfc0 08e18eb8 ffffff80 081801ec ffffff80 0817fc3c ffffff80 081488c4 ffffff80
- [ 88.317391] cfe0 0936423c ffffff80 00000000 00000000 7ce1dc30 ffffffc0 7ce1dbd0 ffffffc0
- [ 88.318142] d000 0814862c ffffff80 08e18eb8 ffffff80 08180124 ffffff80 0817fb3c ffffff80
- [ 88.318894] d020 081488c4 ffffff80 09363fd0 ffffff80 00000000 00000000 7ce1dcf0 ffffffc0
- [ 88.319645] d040 7ce1dc60 ffffffc0 0814862c ffffff80 08e18eb8 ffffff80 08180080 ffffff80
- [ 88.320397] d060 0817fa5c ffffff80 081488c4 ffffff80 09363f64 ffffff80 00000000 00000000
- [ 88.321153]
- [ 88.321153] X19: 0xffffffc07ff4ebd8:
- [ 88.321595] ebd8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.322344] ebf8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.323096] ec18 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.323847] ec38 00000000 00000000 00000000 00000000 094866e8 ffffff80 00000000 00000000
- [ 88.324600] ec58 00000000 00000000 081d78d8 ffffff80 00000000 00000000 00000003 00000000
- [ 88.325352] ec78 000000b2 000000ba 0000001f 00000000 c1e15e60 ffffffbd c1e199e0 ffffffbd
- [ 88.326100] ec98 c1dd3060 ffffffbd c1dda3a0 ffffffbd 7ff4eca8 ffffffc0 7ff4eca8 ffffffc0
- [ 88.326852] ecb8 00000c1e 00000000 00000000 00000000 0000fd00 00000000 00000000 00000000
- [ 88.327604]
- [ 88.327604] X20: 0xffffff8009466634:
- [ 88.328047] 6634 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.328797] 6654 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.329549] 6674 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.330299] 6694 00000000 00000000 00000000 7d3c0000 ffffffc0 00000800 00000000 00000001
- [ 88.331052] 66b4 00000006 00000013 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.331803] 66d4 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00201b00
- [ 88.332555] 66f4 ffffffc0 00000000 00000001 00000078 00000000 00400000 0000000a 00000003
- [ 88.333308] 6714 00000000 ee6b2800 00000000 0000000a 00000001 00000000 00000000 0000003f
- [ 88.334059]
- [ 88.334059] X21: 0xffffffc07fef7fc8:
- [ 88.334502] 7fc8 00000000 00000000 0947d240 ffffff80 00000000 00000000 00000000 00000000
- [ 88.335252] 7fe8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.336001] 8008 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.336752] 8028 00000000 00000000 00000000 00000000 00000000 00000000 09438c58 ffffff80
- [ 88.337504] 8048 00000030 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.338255] 8068 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.339008] 8088 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.339761] 80a8 00000000 00000000 00000000 00000000 00000000 00000000 7fef80c0 ffffffc0
- [ 88.340513]
- [ 88.340513] X23: 0xffffff80094676a0:
- [ 88.340954] 76a0 00000001 00000000 00000001 00000000 000003e8 00000000 7ff6b480 ffffffc0
- [ 88.341704] 76c0 00000015 00000000 7ff6b440 ffffffc0 00000001 00000006 00000060 00000000
- [ 88.342454] 76e0 00015000 00001000 00000001 00000000 7ff6b4c0 ffffffc0 7ff6d980 ffffffc0
- [ 88.343206] 7700 00000000 00000005 00000010 00000000 7ff6b340 ffffffc0 7feed000 ffffffc0
- [ 88.343957] 7720 76ac2000 00000040 76ad7000 00000040 76aec000 00000040 76b01000 00000040
- [ 88.344710] 7740 76b16000 00000040 76b2b000 00000040 00000000 00000000 00000000 00000000
- [ 88.345461] 7760 00000002 00000000 00003659 00000000 00010000 00000000 0007ffff 00000000
- [ 88.346215] 7780 0000f755 00000000 00002000 00000000 00000000 0000fffa 00000000 00000000
- [ 88.346967]
- [ 88.346967] X24: 0xffffff80081d7858:
- [ 88.347410] 7858 f9400280 721c001f 54fffd20 d5033bbf 52800080 aa1403e1 940733b4 d51b4237
- [ 88.348161] 7878 17fffff3 a9be7bfd 910003fd f9000bf3 aa0003f3 aa1e03e0 d503201f b9406260
- [ 88.348915] 7898 34000160 d5033bbf 91018262 f9800051 885f7c40 51000400 88017c40 35ffffa1
- [ 88.349664] 78b8 f9400bf3 a8c27bfd d65f03c0 d0007c60 9105b400 97fe26bd d4210000 17fffff9
- [ 88.350417] 78d8 a9be7bfd 910003fd a90153f3 aa1e03e0 d503201f f00092c0 91376000 d538d093
- [ 88.351169] 78f8 8b130013 d2800014 f8747a60 b4000040 97ffffdd f8347a7f 91000694 f100429f
- [ 88.351922] 7918 54ffff41 a94153f3 a8c27bfd d65f03c0 a9bc7bfd 910003fd a90153f3 a9025bf5
- [ 88.352674] 7938 f9001bf7 aa0103f3 aa0203f6 aa1e03e0 927bfa73 d503201f f1001e7f 540003e1
- [ 88.353427]
- [ 88.353427] X26: 0xffffff8009466f80:
- [ 88.353870] 6f80 09467580 ffffff80 00000000 00000000 0960a1e8 ffffff80 09482f58 ffffff80
- [ 88.354623] 6fa0 09482e68 ffffff80 09482e18 ffffff80 09482dc8 ffffff80 09482c88 ffffff80
- [ 88.355376] 6fc0 09482cd8 ffffff80 0960a610 ffffff80 0960a6a8 ffffff80 0960a740 ffffff80
- [ 88.356129] 6fe0 09482eb8 ffffff80 09482f08 ffffff80 09482d78 ffffff80 09483480 ffffff80
- [ 88.356881] 7000 09482d28 ffffff80 09602f98 ffffff80 09603030 ffffff80 096030c8 ffffff80
- [ 88.357632] 7020 09603160 ffffff80 096031f8 ffffff80 09603290 ffffff80 09603328 ffffff80
- [ 88.358386] 7040 096033c0 ffffff80 09603458 ffffff80 096034f0 ffffff80 09603588 ffffff80
- [ 88.359137] 7060 09606558 ffffff80 096065f0 ffffff80 09606688 ffffff80 09606720 ffffff80
- [ 88.359892]
- [ 88.359892] X27: 0xffffff8009466634:
- [ 88.360334] 6634 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.361084] 6654 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.361834] 6674 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.362586] 6694 00000000 00000000 00000000 7d3c0000 ffffffc0 00000800 00000000 00000001
- [ 88.363337] 66b4 00000006 00000013 00000000 00000000 00000000 00000000 00000000 00000000
- [ 88.364088] 66d4 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00201b00
- [ 88.364840] 66f4 ffffffc0 00000000 00000001 00000078 00000000 00400000 0000000a 00000003
- [ 88.365590] 6714 00000000 ee6b2800 00000000 0000000a 00000001 00000000 00000000 0000003f
- [ 88.366342]
- [ 88.366342] X28: 0xffffff80094676a0:
- [ 88.366785] 76a0 00000001 00000000 00000001 00000000 000003e8 00000000 7ff6b480 ffffffc0
- [ 88.367538] 76c0 00000015 00000000 7ff6b440 ffffffc0 00000001 00000006 00000060 00000000
- [ 88.368288] 76e0 00015000 00001000 00000001 00000000 7ff6b4c0 ffffffc0 7ff6d980 ffffffc0
- [ 88.369040] 7700 00000000 00000005 00000010 00000000 7ff6b340 ffffffc0 7feed000 ffffffc0
- [ 88.369791] 7720 76ac2000 00000040 76ad7000 00000040 76aec000 00000040 76b01000 00000040
- [ 88.370545] 7740 76b16000 00000040 76b2b000 00000040 00000000 00000000 00000000 00000000
- [ 88.371294] 7760 00000002 00000000 00003659 00000000 00010000 00000000 0007ffff 00000000
- [ 88.372046] 7780 0000f755 00000000 00002000 00000000 00000000 0000fffa 00000000 00000000
- [ 88.372797]
- [ 88.372797] X29: 0xffffffc0795b3ba0:
- [ 88.373240] 3ba0 00000004 00000000 09467720 ffffff80 081d78d8 ffffff80 00000000 00000000
- [ 88.373993] 3bc0 09467000 ffffff80 094666b4 ffffff80 09467720 ffffff80 795b3c20 ffffffc0
- [ 88.374746] 3be0 08115d1c ffffff80 795b3c20 ffffffc0 081154b0 ffffff80 20000145 00000000
- [ 88.375498] 3c00 7fef8048 ffffffc0 09466000 ffffff80 00000000 00000080 00000008 00000000
- [ 88.376250] 3c20 795b3c40 ffffffc0 08115d1c ffffff80 7fef8040 ffffffc0 08115d30 ffffff80
- [ 88.377000] 3c40 795b3cc0 ffffffc0 08115e78 ffffff80 081d78d8 ffffff80 00000000 00000000
- [ 88.377751] 3c60 00000000 00000000 795b3d68 ffffffc0 00000001 00000000 081d78d8 ffffff80
- [ 88.378501] 3c80 00000001 00000000 09465588 ffffff80 081d6798 ffffff80 7c6bb600 ffffffc0
- [ 88.379253]
- [ 88.379390] Kernel panic - not syncing: softlockup: hung tasks
- [ 89.546567] SMP: failed to stop secondary CPUs
- [ 89.546959] CRU:
- [ 89.547132] 00000000: 0000003b 00001101 80000000 00000108 00000007 00007f00 00000000 00000000
- [ 89.547881] 00000020: 00000053 00001101 80000000 00000108 00000007 00007f00 00000000 00000000
- [ 89.548628] 00000040: 00000064 00001301 8000031f 00000108 00000007 00007f00 00000000 00000000
- [ 89.549377] 00000060: 000000c0 00001302 8000031f 00000008 00000007 00007f00 00000000 00000000
- [ 89.550126] 00000080: 00000064 00001301 80000000 00000108 00000007 00007f00 00000000 00000000
- [ 89.550875] 000000a0: 0000004b 00001301 80000000 00000108 00000007 00007f00 00000000 00000000
- [ 89.551623] 000000c0: 00000081 00003701 80f00000 00000100 00000007 00007f00 00000000 00000000
- [ 89.552370] 000000e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.553119] 00000100: 00000100 00000606 00000140 00006909 00000083 00008581 00008320 00000141
- [ 89.553868] 00000120: 00000181 00008181 00000141 00000141 00004141 00008340 00003185 00000107
- [ 89.554616] 00000140: 00000201 00000300 00002e87 00000110 00009381 00008387 00001103 00005282
- [ 89.555365] 00000160: 00008247 00000187 00001743 0000001f 00000380 00000380 00000380 00000000
- [ 89.556113] 00000180: 0000e380 00009200 00000200 00000200 00000200 00000200 00003f3f 00000081
- [ 89.556862] 000001a0: 00000000 00000000 00004141 00000421 00008700 000002dc 00000005 00000381
- [ 89.557611] 000001c0: 00000381 00000000 00000103 00000087 00000087 00000141 00000141 00008181
- [ 89.558358] 000001e0: 00008320 00000007 00008f1f 00008f8f 00008f8f 00008787 00008787 00008787
- [ 89.559107] 00000200: 000000cf 000000cf 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.559853] 00000220: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.560602] 00000240: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.561350] 00000260: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.562099] 00000280: 0bb8ea60 0bb8ea60 0bb8ea60 0bb8ea60 0bb8ea60 0bb8ea60 0bb8ea60 0bb8ea60
- [ 89.562848] 000002a0: 0bb8ea60 0bb8ea60 00010014 0bb8ea60 00000000 00000000 00000000 00000000
- [ 89.563596] 000002c0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.564344] 000002e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.565091] 00000300: 00000080 00000080 00000202 0000006b 00000c30 00000000 00000018 000001c0
- [ 89.565840] 00000320: 0000efd8 0000f0ff 0000e0ff 0000c130 0000000a 0000e233 00000000 00000000
- [ 89.566588] 00000340: 00000505 00000505 00001000 00000000 00000200 0000000f 0000cfeb 00003f00
- [ 89.567337] 00000360: 0000ef60 00000020 00000ffe 000001f0 000000c0 00000f86 00000d0a 000001b8
- [ 89.568085] 00000380: 00002010 00000000 00000028 00000000 00000000 00000000 00000000 00000000
- [ 89.568832] 000003a0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.569580] 000003c0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.570329] 000003e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.571077] 00000400: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.571825] 00000420: 00000000 00004070 00000000 00000014 00000000 00000000 00000000 00000000
- [ 89.572574] 00000440: 00000000 00000000 00000000 00000000 00001000 00000000 00000000 00000000
- [ 89.573322] 00000460: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.574071] 00000480: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.574818] 000004a0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.575567] 000004c0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.576315] 000004e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.577062] 00000500: 00000000 00000000 00640064 00000000 00000003 00000000 00000000 00000000
- [ 89.577809] 00000520: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.578556] 00000540: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.579304] 00000560: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.580050] 00000580: 00000004 0000046c 00000004 00000000 00000004
- [ 89.580588] PMU CRU:
- [ 89.580790] 00000000: 000000a9 00001203 80000000 00000108 00000007 00007f00 00000000 00000000
- [ 89.581540] 00000020: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.582290] 00000040: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.583040] 00000060: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.583791] 00000080: 0000060d 00001986 00000303 00000003 000002dc 00000200 0bb8ea60 00010014
- [ 89.584540] 000000a0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.585290] 000000c0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.586040] 000000e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.586790] 00000100: 00000ffc 0000fb80 0000000f 00000000 00000024 00000000 00000000 00000000
- [ 89.587536] 00000120: 00000000 00000000 00000000 00000000 00000003
- [ 89.588077] PMU:
- [ 89.588250] 00000000: 00000000 00000000 00000000 00000000 00000000 10cf8100 10cf8100 00000000
- [ 89.589000] 00000020: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.589749] 00000040: 00000000 00000000 00000000 00000000 00000000 98cf833f 00000000 00000000
- [ 89.590498] 00000060: 00400779 00400779 00400779 00000010 00000000 00007e00 00000000 28800000
- [ 89.591248] 00000080: 000003c0 00011940 00005dc0 000003c0 00005dc0 00000060 0000000f 00000018
- [ 89.591997] 000000a0: 00000018 00000018 00000018 00000006 00000006 00005dc0 00005dc0 00005dc0
- [ 89.592747] 000000c0: 00000000 00000003 00000003 00000000 00000000 00000003 3fffffff 00000000
- [ 89.593496] 000000e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.594239] Kernel Offset: disabled
- [ 89.594546] Memory Limit: none
- [ 89.594825] rockchip-thermal ff260000.tsadc: channal 0: temperature(48 C)
- [ 89.595417] THERMAL REGS:
- [ 89.595655] 00000000: 00000200 00030133 00000031 00000002 00000000 00000000 00000000 00000000
- [ 89.596405] 00000020: 00000228 0000021f 00000000 00000000 0000025f 00000000 00000000 00000000
- [ 89.597154] 00000040: 00000293 00000293 00000000 00000000 00000000 00000000 00000000 00000000
- [ 89.597903] 00000060: 00000004 00000004 00000753 00000753 00000000 00000000 00000000 00000000
- [ 89.598646] 00000080: 00000000 00000000
- [ 89.598988] Rebooting in 10 seconds..
- DDR Version 1.13 20180801
- In
- Channel 0: LPDDR4,50MHz
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
- Channel 1: LPDDR4,50MHz
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
- 256B stride
- channel 0
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- change freq to 400MHz 0,1
- channel 0
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- change freq to 800MHz 1,0
- ch 0 ddrconfig = 0x101, ddrsize = 0x20
- ch 1 ddrconfig = 0x101, ddrsize = 0x20
- pmugrf_os_reg[2] = 0x3281F281, stride = 0x9
- OUT
- Boot1: 2018-04-08, version: 1.12
- CPUId = 0x0
- ChipType = 0x10, 220
- mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
- mmc: ERROR: Card did not respond to voltage select!
- emmc reinit
- mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
- mmc: ERROR: Card did not respond to voltage select!
- emmc reinit
- mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
- mmc: ERROR: Card did not respond to voltage select!
- SdmmcInit=2 1
- mmc0:cmd5,32
- SdmmcInit=0 0
- BootCapSize=0
- UserCapSize=15193MB
- FwPartOffset=2000 , 0
- StorageInit ok = 69790
- LoadTrustBL
- No find bl30.bin
- No find bl32.bin
- Load uboot, ReadLba = 2000
- Load OK, addr=0x200000, size=0xa195c
- RunBL31 0x10000
- NOTICE: BL31: v1.3(debug):65aa5ce
- NOTICE: BL31: Built : 10:47:37, Jun 19 2018
- NOTICE: BL31: Rockchip release version: v1.1
- INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
- INFO: Using opteed sec cpu_context!
- INFO: boot cpu mask: 0
- INFO: plat_rockchip_pmu_init(1151): pd status 3e
- INFO: BL31: Initializing runtime services
- WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE K
- ERROR: Error initializing runtime service opteed_fast
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0x200000
- INFO: SPSR = 0x3c9
- U-Boot 2017.09 (Aug 10 2018 - 16:43:20 -0400)
- Model: Pine64 RockPro64
- DRAM: 2 GiB
- DCDC_REG1@vdd_center: ; enabling
- DCDC_REG2@vdd_cpu_l: ; enabling
- DCDC_REG3@vcc_ddr: ; enabling (ret: -38)
- DCDC_REG4@vcc_1v8: set 1800000 uV; enabling
- LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling
- LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling
- LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling
- LDO_REG4@vcc_sd: set 3300000 uV; enabling
- LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling
- LDO_REG6@vcc_1v5: set 1500000 uV; enabling
- LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling
- LDO_REG8@vcc_3v0: set 3000000 uV; enabling
- SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38)
- SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38)
- vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38)
- dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38)
- vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38)
- vcc3v3-sys@vcc3v3_sys: set 3300000 uV; enabling (ret: -38)
- vcc-phy-regulator@vcc_phy: ; enabling (ret: -38)
- vdd-log@vdd_log: ; enabling (ret: -38)
- MMC: sdhci@fe330000: 0, dwmmc@fe320000: 1
- SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
- *** Warning - bad CRC, using default environment
- In: serial@ff1a0000
- Out: serial@ff1a0000
- Err: serial@ff1a0000
- Model: Pine64 RockPro64
- Net: eth0: ethernet@fe300000
- Hit any key to stop autoboot: 0
- Card did not respond to voltage select!
- mmc_init: -95, time 21
- switch to partitions #0, OK
- mmc1 is current device
- Scanning mmc 1:1...
- Found /extlinux/extlinux.conf
- Retrieving file: /extlinux/extlinux.conf
- reading /extlinux/extlinux.conf
- 379 bytes read in 3 ms (123 KiB/s)
- 1: ROCKPRO
- Retrieving file: /Image
- reading /Image
- 22896648 bytes read in 3632 ms (6 MiB/s)
- append: console=ttyS2,1500000n8 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 panic=10 init=/sbin/init coherent_poot
- Retrieving file: /rk3399-rockpro64.dtb
- reading /rk3399-rockpro64.dtb
- 92380 bytes read in 18 ms (4.9 MiB/s)
- ## Flattened Device Tree blob at 01f00000
- Booting using the fdt blob at 0x1f00000
- Loading Device Tree to 000000007deea000, end 000000007df038db ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 4.4.171 (adam@adam-vb) (gcc version 7.1.1 20170707 (Linaro GCC 7.1-2017.08) ) #1 SMP Tue9
- [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
- [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
- [ 0.000000] bootconsole [uart0] enabled
- INIT: version 2.88 booting
- Starting logging: Jan 18 08:51:45 RECALBOX syslog.info syslogd started: BusyBox v1.27.2
- OK
- Jan 18 08:51:45 RECALBOX user.notice kernel: klogd started: BusyBox v1.27.2 (2019-02-01 22:43:19 EST)
- Jan 18 08:51:45 RECALBOX user.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0
- Jan 18 08:51:45 RECALBOX user.info kernel: [ 0.000000] Initializing cgroup subsys cpuset
- Jan 18 08:51:45 RECALBOX user.info kernel: [ 0.000000] Initializing cgroup subsys cpu
- Jan 18 08:51:45 RECALBOX user.info kernel: [ 0.000000] Initializing cgroup subsys cpuacct
- Jan 18 08:51:45 RECALBOX user.notice kernel: [ 0.000000] Linux version 4.4.171 (adam@adam-vb) (gcc version 7.1.1 29
- Jan 18 08:51:45 RECALBOX user.info kernel: [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
- Jan 18 08:51:45 RECALBOX user.info kernel: [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (option)
- Jan 18 08:51:45 RECALBOX user.info kernel: [ 0.000000] bootconsole [uart0] enabled
- Jan 18 08:51:45 RECALBOX user.debug kernel: [ 0.000000] On node 0 totalpages: 523776
- Jan 18 08:51:45 RECALBOX user.debug kernel: [ 0.000000] DMA zone: 8184 pages used for memmap
- Jan 18 08:51:45 RECALBOX user.debug kernel: [ 0.000000] DMA zone: 0 pages reserved
- Jan 18 08:51:45 RECALBOX user.debug kernel: [ 0.000000] DMA zone: 523776 pages, LIFO batch:31
- Jan 18 08:51:45 RECALBOX user.info kernel: [ 0.000000] psci: probing for conduit method from DT.
- Jan 18 08:51:45 RECALBOX user.info kernel: [ 0.000000] psci: PSCIv1.0 detected in firmware.
- Jan 18 08:51:45 RECALBOX user.info kernel: [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- Jan 18 08:51:45 RECALBOX user.info kernel: [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- Jan 18 08:51:45 RECALBOX user.info kernel: [ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07feed000 s45800 r8196
- Jan 18 08:51:45 RECALBOX user.debug kernel: [ 0.000000] pcpu-alloc: s45800 r8192 d32024 u86016 alloc=21*4096
- Jan 18 08:51:45 RECALBOX user.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
- Jan 18 08:51:45 RECALBOX user.info kernel: [ 0.000000] Detected VIPT I-cache on CPU0
- Jan 18 08:51:45 RECALBOX user.info kernel: [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- Jan 18 08:51:45 RECALBOX user.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Tot2
- Jan 18 08:51:45 RECALBOX user.notice kernel: [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 a
- Jan 18 08:51:45 RECALBOX user.info kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- Jan 18 08:51:45 RECALBOX user.info kernel: [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 )
- Jan 18 08:51:45 RECALBOX user.info kernel: [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 b)
- Jan 18 08:51:45 RECALBOX user.info kernel: [ 0.000000] software IO TLB: mapped [mem 0x7fea5000-0x7fee5000] (0MB)
- Jan 18 08:51:45 RECALBOX user.info kernel: [ 0.000000] Memory: 2034560K/2095104K available (13822K kernel code, 20)
- Jan 18 08:51:45 RECALBOX user.notice kernel: [ 0.000000] Virtual kernel memory layout:
- Jan 18 08:51:45 RECALBOX user.notice kernel: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ()
- Jan 18 08:51:45 RECALBOX user.notice kernel: [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ()
- Jan 18 08:51:45 RECALBOX user.notice kernel: [ 0.000000] .init : 0xffffff8009350000 - 0xffffff8009460000 ()
- Jan 18 08:51:45 RECALBOX user.notice kernel: [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008e00000 ()
- Jan 18 08:51:45 RECALBOX user.notice kernel: [ 0.000000] .rodata : 0xffffff8008e00000 - 0xffffff8009350000 ()
- Jan 18 08:51:45 RECALBOX user.notice kernel: [ 0.000000] .data : 0xffffff8009460000 - 0xffffff8009656008 ()
- Jan 18 08:51:45 RECALBOX user.nJan 18 08:51:45 RECALBOX user.debug kernel: [ 0.503449] rk808 0-001b: using device p
- Jan 18 08:51:45 RECALBOX user.debug kernel: [ 0.503459] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property'
- Jan 18 08:51:45 RECALBOX user.debug kernel: [ 0.503468] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property '
- Jan 18 08:51:45 RECALBOX user.debug kernel: [ 0.503475] rk808 0-001b: using lookup tables for GPIO lookup
- Jan 18 08:51:45 RECALBOX user.debug kernel: [ 0.503483] rk808 0-001b: lookup for GPIO dvs failed
- Jan 18 08:51:45 RECALBOX user.warn kernel: [ 0.503491] rk808-regulator rk808-regulator: there is no dvs0 gpio
- Jan 18 08:51:45 RECALBOX user.debug kernel: [ 0.503498] rk808 0-001b: GPIO lookup for consumer dvs
- Jan 18 08:51:45 RECALBOX user.debug kernel: [ 0.503505] rk808 0-001b: using device tree for GPIO lookup
- Jan 18 08:51:45 RECALBOX user.debug kernel: [ 0.503513] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property'
- Jan 18 08:51:45 RECALBOX user.debug kernel: [ 0.503521] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property '
- Jan 18 08:51:45 RECALBOX user.debug kernel: [ 0.503527] rk808 0-001b: using lookup tables for GPIO lookup
- Jan 18 08:51:45 RECALBOX user.debug kernel: [ 0.503534] rk808 0-001b: lookup for GJan 18 08:51:45 RECALBOX user.wa!
- grep: /boot/config.txt: No such file or directory
- sed: /boot/config.txt: No such file or directory
- append console=ttyS2,1500000n8 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 panic=10 init=/sbin/init coherent_poolt
- egrep: /boot/recalbox-backup.conf: No such file or directory
- Populating /dev using udev: done
- Starting system message bus: done
- Starting network: OK
- Starting connman ... done.
- DDR Version 1.13 20180801
- In
- Channel 0: LPDDR4,50MHz
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
- Channel 1: LPDDR4,50MHz
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
- 256B stride
- channel 0
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- change freq to 400MHz 0,1
- channel 0
- CS = 0
- MR0=0x98
- MR4=0x82
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x98
- MR4=0x82
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- change freq to 800MHz 1,0
- ch 0 ddrconfig = 0x101, ddrsize = 0x20
- ch 1 ddrconfig = 0x101, ddrsize = 0x20
- pmugrf_os_reg[2] = 0x3281F281, stride = 0x9
- OUT
- Boot1: 2018-04-08, version: 1.12
- CPUId = 0x0
- ChipType = 0x10, 218
- mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
- mmc: ERROR: Card did not respond to voltage select!
- emmc reinit
- mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
- mmc: ERROR: Card did not respond to voltage select!
- emmc reinit
- mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
- mmc: ERROR: Card did not respond to voltage select!
- SdmmcInit=2 1
- mmc0:cmd5,32
- SdmmcInit=0 0
- BootCapSize=0
- UserCapSize=15193MB
- FwPartOffset=2000 , 0
- StorageInit ok = 69917
- LoadTrustBL
- No find bl30.bin
- No find bl32.bin
- Load uboot, ReadLba = 2000
- Load OK, addr=0x200000, size=0xa195c
- RunBL31 0x10000
- NOTICE: BL31: v1.3(debug):65aa5ce
- NOTICE: BL31: Built : 10:47:37, Jun 19 2018
- NOTICE: BL31: Rockchip release version: v1.1
- INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
- INFO: Using opteed sec cpu_context!
- INFO: boot cpu mask: 0
- INFO: plat_rockchip_pmu_init(1151): pd status 3e
- INFO: BL31: Initializing runtime services
- WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE K
- ERROR: Error initializing runtime service opteed_fast
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0x200000
- INFO: SPSR = 0x3c9
- U-Boot 2017.09 (Aug 10 2018 - 16:43:20 -0400)
- Model: Pine64 RockPro64
- DRAM: 2 GiB
- DCDC_REG1@vdd_center: ; enabling
- DCDC_REG2@vdd_cpu_l: ; enabling
- DCDC_REG3@vcc_ddr: ; enabling (ret: -38)
- DCDC_REG4@vcc_1v8: set 1800000 uV; enabling
- LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling
- LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling
- LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling
- LDO_REG4@vcc_sd: set 3300000 uV; enabling
- LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling
- LDO_REG6@vcc_1v5: set 1500000 uV; enabling
- LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling
- LDO_REG8@vcc_3v0: set 3000000 uV; enabling
- SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38)
- SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38)
- vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38)
- dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38)
- vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38)
- vcc3v3-sys@vcc3v3_sys: set 3300000 uV; enabling (ret: -38)
- vcc-phy-regulator@vcc_phy: ; enabling (ret: -38)
- vdd-log@vdd_log: ; enabling (ret: -38)
- MMC: sdhci@fe330000: 0, dwmmc@fe320000: 1
- SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
- *** Warning - bad CRC, using default environment
- In: serial@ff1a0000
- Out: serial@ff1a0000
- Err: serial@ff1a0000
- Model: Pine64 RockPro64
- Net: eth0: ethernet@fe300000
- Hit any key to stop autoboot: 0
- Card did not respond to voltage select!
- mmc_init: -95, time 20
- switch to partitions #0, OK
- mmc1 is current device
- Scanning mmc 1:1...
- Found /extlinux/extlinux.conf
- Retrieving file: /extlinux/extlinux.conf
- reading /extlinux/extlinux.conf
- 379 bytes read in 2 ms (184.6 KiB/s)
- 1: ROCKPRO
- Retrieving file: /Image
- reading /Image
- 22896648 bytes read in 3629 ms (6 MiB/s)
- append: console=ttyS2,1500000n8 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 panic=10 init=/sbin/init coherent_poot
- Retrieving file: /rk3399-rockpro64.dtb
- reading /rk3399-rockpro64.dtb
- 92380 bytes read in 17 ms (5.2 MiB/s)
- ## Flattened Device Tree blob at 01f00000
- Booting using the fdt blob at 0x1f00000
- Loading Device Tree to 000000007deea000, end 000000007df038db ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 4.4.171 (adam@adam-vb) (gcc version 7.1.1 20170707 (Linaro GCC 7.1-2017.08) ) #1 SMP Tue9
- [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
- [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
- [ 0.000000] bootconsole [uart0] enabled
- INIT: version 2.88 booting
- Starting logging: OK
- Jan 18 08:50:08 RECALBOX syslog.info syslogd started: BusyBox v1.27.2
- Jan 18 08:50:08 RECALBOX user.notice kernel: klogd started: BusyBox v1.27.2 (2019-02-01 22:43:19 EST)
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] Initializing cgroup subsys cpuset
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] Initializing cgroup subsys cpu
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] Initializing cgroup subsys cpuacct
- Jan 18 08:50:08 RECALBOX user.notice kernel: [ 0.000000] Linux version 4.4.171 (adam@adam-vb) (gcc version 7.1.1 29
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (option)
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] bootconsole [uart0] enabled
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.000000] On node 0 totalpages: 523776
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.000000] DMA zone: 8184 pages used for memmap
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.000000] DMA zone: 0 pages reserved
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.000000] DMA zone: 523776 pages, LIFO batch:31
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] psci: probing for conduit method from DT.
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] psci: PSCIv1.0 detected in firmware.
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07feed000 s45800 r8196
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.000000] pcpu-alloc: s45800 r8192 d32024 u86016 alloc=21*4096
- Jan 18 08:50:08 RECALBOX user.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] Detected VIPT I-cache on CPU0
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Tot2
- Jan 18 08:50:08 RECALBOX user.notice kernel: [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 a
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 )
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 b)
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] software IO TLB: mapped [mem 0x7fea5000-0x7fee5000] (0MB)
- Jan 18 08:50:08 RECALBOX user.info kernel: [ 0.000000] Memory: 2034560K/2095104K available (13822K kernel code, 20)
- Jan 18 08:50:08 RECALBOX user.notice kernel: [ 0.000000] Virtual kernel memory layout:
- Jan 18 08:50:08 RECALBOX user.notice kernel: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ()
- Jan 18 08:50:08 RECALBOX user.notice kernel: [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ()
- Jan 18 08:50:08 RECALBOX user.notice kernel: [ 0.000000] .init : 0xffffff8009350000 - 0xffffff8009460000 ()
- Jan 18 08:50:08 RECALBOX user.notice kernel: [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008e00000 ()
- Jan 18 08:50:08 RECALBOX user.notice kernel: [ 0.000000] .rodata : 0xffffff8008e00000 - 0xffffff8009350000 ()
- Jan 18 08:50:08 RECALBOX user.notice kernel: [ 0.000000] .Jan 18 08:50:08 RECALBOX user.warn kernel: [ 2.!
- grep: /boot/config.txt: No such file or directory
- Jan 18 08:50:08 RECALBOX user.notice kernel: [ 2.226921] random: nonblocking pool is initialized
- sed: /boot/config.txt: No such file or directory
- append console=ttyS2,1500000n8 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 panic=10 init=/sbin/init coherent_poolt
- egrep: /boot/recalbox-backup.conf: No such file or directory
- Populating /dev using udev: done
- Starting system message bus: done
- Starting network: OK
- Starting connman ... done.
- mount: mounting /dev/mmcblk0p3 on /recalbox/share failed: Invalid argument
- ls: /var/run/usbmount.delay: No such file or directory
- /etc/init.d/S11share: line 296: /recalbox/share/system/logs/init.log: No such file or directory
- /etc/init.d/S11share: line 296: /recalbox/share/system/logs/recalbox.log: No such file or directory
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- cp: write error: No space left on device
- Files /recalbox/share/system/logs/lastrecalbox.conf.update and /recalbox/recalbox.version differ
- Files /recalbox/share/system/logs/lastrecalbox.conf.update and /recalbox/recalbox.version differ
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- cp: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- ReicastGenerator 's configuration successfully upgraded
- sed: /recalbox/share/system/configs/retroarch/retroarchcustom.cfg: No such file or directory
- Save /recalbox/share/system/configs/retroarch/retroarchcustom.cfg.origin
- LibretroConfig 's configuration successfully upgraded
- AdvMameGenerat support configuration upgrade yet
- KodiGenerator does not support configuration upgrade yet
- PPSSPPGenerator does not support configuration upgrade yet
- ViceGenerator does not support configuration upgrade yet
- ResidualVMGenerator does not support configuration upgrade yet
- MoonlightGenerator does not support configuration upgrade yet
- MupenGenerator does not support configuration upgrade yet
- AmiberryGenerator does not support configuration upgrade yet
- DaphneGenerator does not support configuration upgrade yet
- DolphinGenerator does not support configuration upgrade yet
- ScummVMGenerator does not support configuration upgrade yet
- Fba2xGenerator does not support configuration upgrade yet
- DosBoxGenerator does not support configuration upgrade yet
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- cp: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- -:1168: parser error : attributes construct error
- <input name="hotkey" type="button" id="10" value="1" code="316"/
- ^
- -:1168: parser error : Couldn't find end of Start Tag input line 1168
- <input name="hotkey" type="button" id="10" value="1" code="316"/
- ^
- -:1168: parser error : Premature end of data in tag inputConfig line 1164
- <input name="hotkey" type="button" id="10" value="1" code="316"/
- ^
- -:1168: parser error : Premature end of data in tag inputList line 2
- <input name="hotkey" type="button" id="10" value="1" code="316"/
- ^
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- -:1168: parser error : attributes construct error
- <input name="hotkey" type="button" id="10" value="1" code="316"/
- ^
- -:1168: parser error : Couldn't find end of Start Tag input line 1168
- <input name="hotkey" type="button" id="10" value="1" code="316"/
- ^
- -:1168: parser error : Premature end of data in tag inputConfig line 1164
- <input name="hotkey" type="button" id="10" value="1" code="316"/
- ^
- -:1168: parser error : Premature end of data in tag inputList line 2
- <input name="hotkey" type="button" id="10" value="1" code="316"/
- ^
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- Generating key, this may take a while...
- Failed writing file /recalbox/share/system/ssh/dropbear_ecdsa_host_key.tmp1968: No space left on device
- Exited: Failed to generate key.
- Generating key, this may take a while...
- Failed writing file /recalbox/share/system/ssh/dropbear_rsa_host_key.tmp1969: No space left on device
- Exited: Failed to generate key.
- Generating key, this may take a while...
- Failed writing file /recalbox/share/system/ssh/dropbear_dss_host_key.tmp1977: No space left on device
- Exited: Failed to generate key.
- cp: write error: No space left on device
- /recalbox/scripts/system/uuid.sh: line 25: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /recalbox/scripts/recalbox-includes.sh: line 116: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /etc/init.d/S16modprobe: line 10: /etc/modules.conf: No such file or directory
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- Initializing random number generator... done.
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- Hyperion service: disabled
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- sed: write error
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- rm: can't remove '/recalbox/es.log.old': No such file or directory
- mv: can't rename '/recalbox/es.log': No such file or directory
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- lvl2: EmulationStation - v dev, built Mar 5 2019 - 14:48:32
- lvl2: Setting local directory to /usr/bin/locale/lang
- lvl2: Locals set...
- lvl2: Creating surface...
- lvl2: Created window successfully.
- New SMB password:
- Retype new SMB password:
- Added user root.
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- Starting ntpd: OK
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- Starting dropbear sshd: OK
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- lvl0: Error parsing input config: Error parsing start element tag
- lvl2: Added unconfigured joystick Sony Computer Entertainment Wireless Controller (GUID: 030000004c050000c405000011.
- lvl0: Error parsing input config: Error parsing start element tag
- Starting SMB services: lvl2: Checking available OpenGL extensions...
- lvl2: ARB_texture_non_power_of_two: MISSING
- done
- Starting NMB services: lvl3: VolumeControl::init() - Opened ALSA mixer
- lvl3: VolumeControl::init() - Attached to default card
- lvl3: VolumeControl::init() - Registered simple element class
- lvl3: VolumeControl::init() - Loaded mixer elements
- lvl0: VolumeControl::init() - Failed to find mixer elements!
- lvl3: VolumeControl::init() - Opened ALSA mixer
- lvl3: VolumeControl::init() - Attached to default card
- lvl3: VolumeControl::init() - Registered simple element class
- lvl3: VolumeControl::init() - Loaded mixer elements
- lvl0: VolumeControl::init() - Failed to find mixer elements!
- lvl2: SDL AUDIO Initialized
- lvl0: /recalbox/share/system/.emulationstation/es_systems.cfg file does not exist!
- lvl2: Loading system config files /etc/emulationstation/es_systems.cfg...
- lvl1: Key: 3do3do
- lvl1: Key: amstradcpcamstradcpc
- lvl1: Key: atari2600atari2600
- lvl1: Key: atari5200atari5200
- lvl1: Key: atari7800atari7800
- lvl1: Key: atari800atari800
- lvl1: Key: ataristatarist
- lvl1: Key: c64c64
- lvl1: Key: cavestorycavestory
- lvl1: Key: colecovisioncolecovision
- lvl1: Key: daphnedaphne
- lvl1: Key: dospc
- lvl1: Key: dreamcastdreamcast
- lvl1: Key: fba_libretroarcade
- lvl1: Key: fdsfds
- lvl1: Key: gamegeargamegear
- lvl1: Key: gbagba
- lvl1: Key: gbcgbc
- lvl1: Key: gbgb
- lvl1: Key: gwgw
- lvl1: Key: imageviewerignore
- lvl1: Key: jaguarjaguar
- lvl1: Key: lutrolutro
- lvl1: Key: lynxatarilynx
- lvl1: Key: mamearcade
- lvl1: Key: mastersystemmastersystem
- lvl1: Key: megadrivemegadrive
- lvl1: Key: moonlightpc
- lvl1: Key: msx1msx
- lvl1: Key: msx2msx
- lvl1: Key: msxmsx
- lvl1: Key: n64n64
- lvl1: Key: ndsnds
- lvl1: Key: neogeoneogeo
- lvl1: Key: nesnes
- lvl1: Key: ngpcngpc
- lvl1: Key: ngpngp
- lvl1: Key: o2emodyssey2
- lvl1: Key: pcenginecdpcenginecd
- lvl1: Key: pcenginepcengine
- lvl1: Key: prboomprboom
- lvl1: Key: psppsp
- lvl1: Key: psxpsx
- lvl1: Key: scummvmscummvm
- lvl1: Key: sega32xsega32x
- lvl1: Key: segacdsegacd
- lvl1: Key: sg1000sg1000
- lvl1: Key: snessnes
- lvl1: Key: supergrafxsupergrafx
- lvl1: Key: thomsonthomsonto
- lvl1: Key: vectrexvectrex
- lvl1: Key: virtualboyvirtualboy
- lvl1: Key: wswancwonderswancolor
- lvl1: Key: wswanwonderswan
- lvl1: Key: x68000x68000
- lvl1: Key: zx81zx81
- lvl1: Key: zxspectrumzxspectrum
- lvl1: Key: favorites
- lvl2: creating thread for system 3do
- lvl2: creating thread for system amstradcpc
- lvl2: creating thread for system atari2600
- lvl2: creating thread for system atari5200
- lvl2: creating thread for system atari7800
- lvl2: creating thread for system atari800
- lvl2: creating thread for system atarist
- lvl2: creating thread for system c64
- lvl2: creating thread for system cavestory
- lvl2: creating thread for system colecovision
- lvl2: creating thread for system daphne
- lvl2: creating thread for system dos
- lvl2: creating thread for system dreamcast
- lvl2: creating thread for system fba_libretro
- lvl2: creating thread for system fds
- lvl2: creating thread for system gamegear
- lvl2: creating thread for system gba
- lvl2: creating thread for system gbc
- lvl2: creating thread for system gb
- lvl2: creating thread for system gw
- lvl2: creating thread for system imageviewer
- lvl2: creating thread for system jaguar
- lvl2: creating thread for system lutro
- lvl2: creating thread for system lynx
- lvl2: creating thread for system mame
- lvl2: creating thread for system mastersystem
- lvl2: creating thread for system megadrive
- lvl2: creating thread for system moonlight
- lvl2: creating thread for system msx1
- lvl2: creating thread for system msx2
- lvl2: Parsing XML file "/recalbox/share/roms/amstradcpc/gamelist.xml"...
- lvl2: creating thread for system msx
- lvl2: creating thread for system n64
- lvl2: creating thread for system nds
- lvl2: creating thread for system neogeo
- lvl2: creating thread for system nes
- lvl2: creating thread for system ngpc
- lvl2: creating thread for system ngp
- lvl2: creating thread for system o2em
- lvl2: creating thread for system pcenginecd
- lvl2: creating thread for system pcengine
- lvl2: creating thread for system prboom
- lvl2: creating thread for system psp
- lvl2: creating thread for system psx
- lvl2: creating thread for system scummvm
- lvl2: creating thread for system sega32x
- lvl2: creating thread for system segacd
- lvl2: creating thread for system sg1000
- lvl2: creating thread for system snes
- lvl2: creating thread for system supergrafx
- lvl2: creating thread for system thomson
- lvl2: creating thread for system vectrex
- lvl2: creating thread for system virtualboy
- lvl2: creating thread for system wswanc
- lvl2: creating thread for system wswan
- lvl2: creating thread for system x68000
- lvl2: creating thread for system zx81
- lvl2: creating thread for system zxspectrum
- lvl2: creating thread for system favorites
- done
- lvl1: System "atari2600" has no games! Ignoring it.
- lvl1: System "3do" has no games! Ignoring it.
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- lvl1: Adding "amstradcpc" in system list.
- lvl1: System "atari5200" has no games! Ignoring it.
- lvl1: System "atari800" has no games! Ignoring it.
- lvl1: System "atari7800" has no games! Ignoring it.
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- lvl1: System "c64" has no games! Ignoring it.
- lvl1: Unknown platform for system "daphne" (platform "daphne" from list "daphne")
- lvl1: System "atarist" has no games! Ignoring it.
- lvl1: System "cavestory" has no games! Ignoring it.
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- lvl1: System "colecovision" has no games! Ignoring it.
- lvl1: System "dreamcast" has no games! Ignoring it.
- lvl1: System "daphne" has no games! Ignoring it.
- lvl1: Adding "dos" in system list.
- lvl2: Parsing XML file "/recalbox/share/roms/gba/gamelist.xml"...
- lvl1: System "fds" has no games! Ignoring it.
- lvl1: System "fba_libretro" has no games! Ignoring it.
- lvl1: System "gbc" has no games! Ignoring it.
- lvl1: Adding "gba" in system list.
- lvl1: System "gamegear" has no games! Ignoring it.
- lvl1: Unknown platform for system "jaguar" (platform "jaguar" from list "jaguar")
- lvl1: System "gb" has no games! Ignoring it.
- lvl1: System "gw" has no games! Ignoring it.
- lvl1: System "lutro" has no games! Ignoring it.
- lvl1: System "lynx" has no games! Ignoring it.
- lvl2: Parsing XML file "/recalbox/share/roms/mastersystem/gamelist.xml"...
- lvl1: System "jaguar" has no games! Ignoring it.
- lvl1: System "imageviewer" has no games! Ignoring it.
- lvl1: System "moonlight" has no games! Ignoring it.
- lvl1: Adding "mastersystem" in system list.
- lvl1: System "megadrive" has no games! Ignoring it.
- lvl1: System "mame" has no games! Ignoring it.
- lvl1: System "msx2" has no games! Ignoring it.
- lvl1: System "msx" has no games! Ignoring it.
- lvl1: System "n64" has no games! Ignoring it.
- lvl2: Parsing XML file "/recalbox/share/roms/nes/gamelist.xml"...
- lvl0: Error parsing XML file "/recalbox/share/roms/nes/gamelist.xml"!
- No document element found
- lvl1: System "msx1" has no games! Ignoring it.
- lvl1: System "nds" has no games! Ignoring it.
- lvl1: System "neogeo" has no games! Ignoring it.
- Starting virtual-gamepads server logging=1, loglevel=info
- mv: can't rename '/recalbox/share/system/logs/virtualgamepads.log': No such file or directory
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- lvl1: Adding "nes" in system list.
- lvl1: System "ngpc" has no games! Ignoring it.
- lvl2: Parsing XML file "/recalbox/share/roms/pcengine/gamelist.xml"...
- lvl1: System "ngp" has no games! Ignoring it.
- lvl2: Parsing XML file "/recalbox/share/roms/prboom/gamelist.xml"...
- lvl1: System "o2em" has no games! Ignoring it.
- lvl1: System "pcenginecd" has no games! Ignoring it.
- lvl1: System "psp" has no games! Ignoring it.
- lvl1: Adding "prboom" in system list.
- lvl1: Adding "pcengine" in system list.
- lvl1: System "psx" has no games! Ignoring it.
- lvl1: System "sega32x" has no games! Ignoring it.
- lvl2: Parsing XML file "/recalbox/share/roms/snes/gamelist.xml"...
- lvl0: Error parsing XML file "/recalbox/share/roms/snes/gamelist.xml"!
- No document element found
- lvl1: System "sg1000" has no games! Ignoring it.
- lvl1: System "segacd" has no games! Ignoring it.
- lvl1: System "scummvm" has no games! Ignoring it.
- lvl1: Adding "snes" in system list.
- lvl1: System "supergrafx" has no games! Ignoring it.
- lvl1: System "vectrex" has no games! Ignoring it.
- lvl1: System "thomson" has no games! Ignoring it.
- lvl1: System "virtualboy" has no games! Ignoring it.
- /usr/bin/recallog: line 33: echo: write error: No space left on device
- lvl1: System "wswanc" has no games! Ignoring it.
- lvl1: System "wswan" has no games! Ignoring it.
- lvl0: System "favorites" is missing name, path, extension, or command!
- lvl3: SystemView::getViewElements()
- lvl2: CommandThread started
- lvl2: Configuring device 0 (Sony Computer Entertainment Wireless Controller).
- lvl2: Mapping [Hat 0 up] -> Up
- lvl2: Mapping [Hat 0 down] -> Down
- lvl2: Mapping [Hat 0 left] -> Left
- lvl2: Mapping [Hat 0 right] -> Right
- lvl2: Mapping [Axis 1-] -> Joystick1Up
- lvl2: Mapping [Axis 0-] -> Joystick1Left
- lvl2: Mapping [Axis 5-] -> Joystick2Up
- lvl2: Mapping [Axis 2-] -> Joystick2Left
- lvl2: Mapping [Button 2] -> A
- lvl2: Mapping [Button 1] -> B
- lvl2: Mapping [Button 3] -> X
- lvl2: Mapping [Button 0] -> Y
- lvl2: Mapping [Button 13] -> Start
- lvl2: Mapping [Axis 1+] -> Select
- lvl2: Mapping [Button 6] -> L2
- lvl2: Mapping [Axis 3-] -> R2
- lvl2: Mapping [Axis 1+] -> HotKey
- lvl0: Error parsing input config: Error parsing start element tag
- lvl2: emulationstation.selectedsystem variable set to favorites system found !
- lvl2: req music [system.bgsound]
- lvl2: (missing)
- lvl2: playing
- cp: write error: No space left on device
- lvl1: Error executing cp /recalbox/recalbox.changelog /recalbox/share/system/recalbox.changelog.done
- lvl2: MusicEnded
- lvl2: playing
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement