Oppo 205 bootloader

preloader_v.35156
[t:0x5b1f29]
[PLL] mt_pll_init.
[PLL] mt_pll_init done.
[nand] u4flag=0x0
[nand] ckgen=0x0, _fgUsingDMA:0x0
 after setting :*NFI_ACCCON : 0x31c08222 , *NFI_CLK_SEL:0x1051000
[fgBootLoaderHeaderVerification] read page correcte able and read success
r_adv_boot_cfg:
u4HeadSig 	HDMI_DBG 	Tray_type 	FastEject 	Dram_Size 	AcOnStby 	EnL2 	DramChAuto 	HighPhysOffset 	CoreOffStr 	DrmkOnlyOff 	LGFEJMICOM 		u4EndSig
0x95175346	0x00000000	0x00000000	0x00000000	0x00000000	0x00000000	0x00000001	0x00000000	0x00000000	0x00000001	0x0009e000	0x00000000	0x78945612
Set PIN RTC_SDA High For MT8581
CFG = 0x1  : 0
[0x0009e000] [0xfb010000]
Should switch some SRAM to normal access...
DDR_Initialize start
u4BLDramCfg= 0x0, u4Tmp = 0x0
[PLL] mempll_init
[PLL] target freq = 900
SSC DOWN : 0x1e901e9 , 0x9
SSC -1.5%
[PLL] mempll_cali
[dram] mpll = 55 MHz
[mempll] mempll2 ref = 55 MHz
[mempll] mempll2 fbk = 55 MHz
[mempll] mempll2 vco = 1787 MHz
[mempll] mempll3 ref = 55 MHz
[mempll] mempll3 fbk = 55 MHz
[mempll] mempll3 vco = 1787 MHz
[mempll] mempll4 ref = 55 MHz
[mempll] mempll4 fbk = 55 MHz
[mempll] mempll4 vco = 1786 MHz
[Check]mt_get_mdl_number 0x2
[EMI] MDL number = 2
[EMI][channel 0]PCDDR3 init start
[EMI][channel 0]PCDDR3 init end
[EMI][channel 1]PCDDR3 init start
[EMI][channel 1]PCDDR3 init end
[EMI][channel 2]PCDDR3 init start
[EMI][channel 2]PCDDR3 init end
CHA_SIZE:512
CHB_SIZE:512
CHC_SIZE:512
824:0x333
CHA_SIZE:512,CHB_SIZE:512,CHC_SIZE:512
CHSEL:04
DRAM Channel_A Pass
DRAM Channel_B Pass
DRAM Channel_C Pass
DDR_Initialize end
dram resize: channel A = 0x20000000, channel B = 0x20000000
Should switch SRAM to security only access...
[nand] u4flag=0x1
[nand] ckgen=0x333, _fgUsingDMA:0x1
 before setting :u1DevID[0] : 0x98
 after setting :*NFI_ACCCON : 0x10401122 , *NFI_CLK_SEL:0x1041000
SBC
ARM	= 1300MHz 0x1813
PLL1	= 1728MHz 0x2000
PLL2	= 1187MHz 0x15ff
LDI
new RSA
u4BlockSize is 0x40000, u4Sz: 0x1000
aMTD Found at 0x400000
RD
Fnr:3
flag:15, inf:37261
version_info not changed!
FLG
F1
N
adjust u4_initrd_size size to :0x325157
TZ 13:03:54
U-Boot-2009.08 (Apr 17 2017 - 12:04:03)
I2C:   ready
DRAM:  1.5G
NAND:  uboot: u1DevID[0] : 0x98
uboot: after setting :*NFI_ACCCON : 0x10401122 , *NFI_CLK_SEL:0x1041110
[nand] read id: 0x98 0xdc 0x90 0x26 0x76 0x16
Nand ECC INFO : 8bit_ecc/512 byte
Nand ID: 98 dc 90 26
512 MiB
u-boot adaptive mtd mechanism applied.
[_i_find_part_tbl] begin to read!!
test here~
return current version .
[_i_find_part_tbl]Part tbl info passed from preloader
pit format is 1~
part number is 0x18.
r_tbl->pc_name: 09679fa8, enc_unit_size:0x0, id:0x40, info: 0x18, no_enc_unit_size:0x0, offset:0x0, size: 0x0~
r_tbl->pc_name: 09679fd0, enc_unit_size:0x0, id:0x1, info: 0x18, no_enc_unit_size:0x0, offset:0x100000, size: 0x200000~
r_tbl->pc_name: 09679ff8, enc_unit_size:0x0, id:0x2, info: 0x38, no_enc_unit_size:0x0, offset:0x300000, size: 0x300000~
r_tbl->pc_name: 0967a020, enc_unit_size:0x0, id:0x3, info: 0x20, no_enc_unit_size:0x0, offset:0x600000, size: 0x300000~
r_tbl->pc_name: 0967a048, enc_unit_size:0x0, id:0x4, info: 0x48, no_enc_unit_size:0x0, offset:0x900000, size: 0x200000~
r_tbl->pc_name: 0967a070, enc_unit_size:0x0, id:0x5, info: 0x58, no_enc_unit_size:0x0, offset:0xB00000, size: 0x200000~
r_tbl->pc_name: 0967a098, enc_unit_size:0x0, id:0x6, info: 0x68, no_enc_unit_size:0x0, offset:0xD00000, size: 0x200000~
r_tbl->pc_name: 0967a0c0, enc_unit_size:0x0, id:0x7, info: 0x78, no_enc_unit_size:0x0, offset:0xF00000, size: 0x200000~
r_tbl->pc_name: 0967a0e8, enc_unit_size:0x0, id:0x8, info: 0x88, no_enc_unit_size:0x0, offset:0x1100000, size: 0x400000~
r_tbl->pc_name: 0967a110, enc_unit_size:0x0, id:0x9, info: 0x98, no_enc_unit_size:0x0, offset:0x1500000, size: 0x400000~
r_tbl->pc_name: 0967a138, enc_unit_size:0x0, id:0xA, info: 0xA8, no_enc_unit_size:0x0, offset:0x1900000, size: 0x400000~
r_tbl->pc_name: 0967a160, enc_unit_size:0x0, id:0xB, info: 0xB8, no_enc_unit_size:0x0, offset:0x1D00000, size: 0x400000~
r_tbl->pc_name: 0967a188, enc_unit_size:0x0, id:0xC, info: 0xC8, no_enc_unit_size:0x0, offset:0x2100000, size: 0x400000~
r_tbl->pc_name: 0967a1b0, enc_unit_size:0x0, id:0xD, info: 0xD8, no_enc_unit_size:0x0, offset:0x2500000, size: 0x800000~
r_tbl->pc_name: 0967a1d8, enc_unit_size:0x0, id:0xE, info: 0xE0, no_enc_unit_size:0x0, offset:0x2D00000, size: 0x1600000~
r_tbl->pc_name: 0967a200, enc_unit_size:0x0, id:0xF, info: 0xF8, no_enc_unit_size:0x0, offset:0x4300000, size: 0x400000~
r_tbl->pc_name: 0967a228, enc_unit_size:0x0, id:0x10, info: 0x2108, no_enc_unit_size:0x0, offset:0x4700000, size: 0xC800000~
r_tbl->pc_name: 0967a250, enc_unit_size:0x0, id:0x11, info: 0x2118, no_enc_unit_size:0x0, offset:0x10F00000, size: 0x200000~
r_tbl->pc_name: 0967a278, enc_unit_size:0x0, id:0x12, info: 0x128, no_enc_unit_size:0x0, offset:0x11100000, size: 0x200000~
r_tbl->pc_name: 0967a2a0, enc_unit_size:0x0, id:0x13, info: 0x138, no_enc_unit_size:0x0, offset:0x11300000, size: 0x300000~
r_tbl->pc_name: 0967a2c8, enc_unit_size:0x0, id:0x14, info: 0x148, no_enc_unit_size:0x0, offset:0x11600000, size: 0x200000~
r_tbl->pc_name: 0967a2f0, enc_unit_size:0x0, id:0x15, info: 0x158, no_enc_unit_size:0x0, offset:0x11800000, size: 0x80000~
r_tbl->pc_name: 0967a318, enc_unit_size:0x0, id:0x16, info: 0x168, no_enc_unit_size:0x0, offset:0x11880000, size: 0x80000~
r_tbl->pc_name: 0967a340, enc_unit_size:0x0, id:0x17, info: 0x3178, no_enc_unit_size:0x0, offset:0x11900000, size: 0xD2C0000~
r_tbl->pc_name: 0967a368, enc_unit_size:0x0, id:0x18, info: 0x574188, no_enc_unit_size:0x0, offset:0x11900000, size: 0xB400000~
[_i_find_part_tbl] version is 1!!
[_i_get_upg_status_in_nand]upg status passed from preloader
[relocate_env]
Using default environment
u-boot init PT6302 VFD start.!
u-boot VFD say:HELLO !
In:    serial
Out:   serial
Err:   serial
r_args_to_uboot:
	head sig	: 0xa0b0ead1
	version	: 1
	boot type	: 0
	dram ch1	: 0x20000000
	dram ch2	: 0x20000000
	kern addr	: 0x060fffc0
	initrd addr	: 0x04300000
	initrd size	: 0x00325157
enable bim two way write.
Bootloader version 24558
Hit any key to stop autoboot:  0
<<MTK:8551>>
[TRUST ZONE]copy tz binary to 03000000, SbinImagesize:0xd353c, sbinfullsize:0x4998f1, svp size:0xe00000, mem size:0x1300000
bootargs:root=/dev/ram0 rw initrd=0x04300000,0x00325157 console=ttyMT0 kgdboc=ttyMT0 mem=1536M mt85xx_reserve=79M,17M drvmem=245M,522M ch3mem=1024M,40M vmalloc=1008M BL_Ver=24558  tz_mem=19922944
## Booting kernel from Legacy Image at 060fffc0 ...
   Image Name:
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3016392 Bytes =  2.9 MB
   Load Address: 06100000
   Entry Point:  06100000
   Loading Kernel Image ... OK
OK
Starting_kernel...
Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 3.10.26 (bdplayer@wx-server) (gcc version 4.8.2 20131014 (prerelease) (Linaro GCC 4.8-2013.10) ) #1 SMP PREEMPT Fri May 25 11:26:05 CST 2018
CPU: ARMv7 Processor [410fd032] revision 2 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: mt85xx
mt85xx_reserve_base:[0x4f00000],reserve_size is 0x1100000
[TRUST ZONE]reserved tz mem size is 0x1300000memblock_reserve: [0x00000000008180-0x000000005e5094] arm_memblock_init+0x50/0x14c
memblock_reserve: [0x00000004300000-0x00000004625157] arm_memblock_init+0xf4/0x14c
memblock_reserve: [0x00000000004000-0x00000000008000] arm_memblock_init+0x120/0x14c
=== mt85xx_reserve_mem 0x60000000===
memblock_reserve: [0x00000040000000-0x00000040010000] mt85xx_reserve_mem+0x1e0/0x238
[rtest]ch1(40000000) ch2(20000000). reserve phy addr(40000000) size(64kB)
memblock_reserve: [0x00000004f00000-0x00000006000000] mt85xx_reserve_mem+0x210/0x238
memblock_reserve: [0x00000000000000-0x00000000001000] mt85xx_reserve_mem+0x9c/0x238
=== mt85xx_mon_mem 0x6000000 0x100000===
=== mt85xx_sbin_mem 0x3000000 0x1300000===
memblock_reserve: [0x0000000f500000-0x0000002ff00000] mt85xx_reserve_mem+0x218/0x238
memblock_reserve: [0x00000040000000-0x00000042800000] arm_memblock_init+0x130/0x14c
MEMBLOCK configuration:
 memory size = 0x5ec00000 reserved size = 0x24c0706b
 memory.cnt  = 0x3
 memory[0x0]	[0x00000000000000-0x00000002ffffff], 0x3000000 bytes
 memory[0x1]	[0x00000004300000-0x00000005ffffff], 0x1d00000 bytes
 memory[0x2]	[0x00000006100000-0x0000005fffffff], 0x59f00000 bytes
 reserved.cnt  = 0x7
 reserved[0x0]	[0x00000000000000-0x00000000000fff], 0x1000 bytes
 reserved[0x1]	[0x00000000004000-0x00000000007fff], 0x4000 bytes
 reserved[0x2]	[0x00000000008180-0x000000005e5093], 0x5dcf14 bytes
 reserved[0x3]	[0x00000004300000-0x00000004625156], 0x325157 bytes
 reserved[0x4]	[0x00000004f00000-0x00000005ffffff], 0x1100000 bytes
 reserved[0x5]	[0x0000000f500000-0x0000002fefffff], 0x20a00000 bytes
 reserved[0x6]	[0x00000040000000-0x000000427fffff], 0x2800000 bytes
Memory policy: ECC disabled, Data cache writealloc
memblock_reserve: [0x0000003fffe000-0x00000040000000] memblock_alloc_base_nid+0x78/0x8c
memblock_reserve: [0x0000003fffd000-0x0000003fffe000] memblock_alloc_base_nid+0x78/0x8c
memblock_reserve: [0x0000003fffcfd8-0x0000003fffd000] memblock_alloc_base_nid+0x78/0x8c
memblock_reserve: [0x0000003fffcf88-0x0000003fffcfd8] memblock_alloc_base_nid+0x78/0x8c
memblock_reserve: [0x0000003fffb000-0x0000003fffc000] memblock_alloc_base_nid+0x78/0x8c
memblock_reserve: [0x0000003fffa000-0x0000003fffb000] memblock_alloc_base_nid+0x78/0x8c
memblock_reserve: [0x0000003fff9000-0x0000003fffa000] memblock_alloc_base_nid+0x78/0x8c
memblock_reserve: [0x0000003fff1000-0x0000003fff9000] memblock_alloc_base_nid+0x78/0x8c
[kernel zone size]DMA: 204800KB, NORMAL: 843776KB
enable log
enable cli input
PERCPU: Embedded 7 pages/cpu @814ee000 s7424 r8192 d13056 u32768
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 386048
Kernel command line: root=/dev/ram0 rw initrd=0x04300000,0x00325157 console=ttyMT0 kgdboc=ttyMT0 mem=1536M mt85xx_reserve=79M,17M drvmem=245M,522M ch3mem=1024M,40M vmalloc=1008M BL_Ver=24558  tz_mem=19922944
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 48MB 29MB 1439MB = 1516MB total
Memory: 933904k/933904k available, 638960k reserved, 483328K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xc0800000 - 0xff000000   (1000 MB)
    lowmem  : 0x80000000 - 0xc0000000   (1024 MB)
    pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
    modules : 0x7e800000 - 0x7fe00000   (  22 MB)
      .text : 0x80008000 - 0x8054f930   (5407 kB)
      .init : 0x80550000 - 0x80572d00   ( 140 kB)
      .data : 0x80574000 - 0x805b36a0   ( 254 kB)
       .bss : 0x805b36a0 - 0x805e5094   ( 199 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:320
WDT_EN=0x0
WDTSTA=0x0
=== timer_set_mode mode:1===
=== timer_set_mode mode:2===
__cpuxgpt_set_clk fwq  div is  0x200
set_cpuxgpt_clk: reg(200)
enable_cpuxgpt: reg(203)
Architected local timer running at 13.50MHz (phys).
=== timer_set_mode mode:0===
=== timer_set_mode mode:1===
Switching to timer-based delay loop
sched_clock: ARM arch timer >56 bits at 13500kHz, resolution 74ns
sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
Console: colour dummy device 80x30
HM_TEST _mt85xx_uart_console_init IN
_mt85xx_uart_set_termios, baud 38400
console [ttyMT0] enabled
_mt85xx_uart_console_init:register console ok
Calibrating delay loop (skipped), value calculated using timer frequency.. 27.00 BogoMIPS (lpj=135000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x803feb28 - 0x803feb80
CPU1: Booted secondary processor
CPU2: Booted secondary processor
CPU3: Booted secondary processor
NS= 4
SMP: processors activated (108.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
NET: Registered protocol family 16
DMA: preallocated 2048 KiB pool for atomic coherent allocations
=== mt8581_init ===
IC Version = E2
Serial: MT85XX driver
ttyMT0 at MMIO 0xf000c020 (irq = 118) is a MT85XX Serial
_mt85xx_save_log_thread
register ahci platform device
bio: create slab <bio-0> at 0
SCSI subsystem initialized
[42 create xhci_vbus.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
unpack_to_rootfs, buf=0x805708e0, len=512
Unpacking initramfs...
unpack_to_rootfs, buf=0x84300000, len=3297623
Freeing initrd memory: 3220K (84300000 - 84625000)
k_gpio module init success
bounce pool size: 64 pages
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Key type cifs.spnego registered
Key type cifs.idmap registered
msgmni has been set to 886
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered (default)
kgdb: Registered I/O driver kgdboc.
_mt85xx_uart_procfs_create entered
loop: module loaded
[AUXADC]: auxadc base address:0xfd024c00
****[mt_auxadc_driver] Initialization : DONE
kernel: after setting :*NFI_ACCCON : 0x10401122 , *NFI_CLK_SEL:0x1041110, enable 0xffffffff
[Bean] DMA BURST!
mt85xx_nand_alloc_memo1 address = 0xbf2d8000
mt85xx_nand_alloc_memo2 address = 0xbf2d8020
0x98,0xdc,0x90,0x26,0x76,0x16,0x98,0xdc,0x90,0x26,0x76,0x16,0x98,0xdc,0x90,0x26,0x76,0x16,[nand] read id: 0x98 0xdc 0x90 0x26 0x76 0x16
NAND device: Manufacturer ID: 0x98, Chip ID: 0xdc (Toshiba NAND 512MiB 3,3V 8-bit), 512MiB, page size: 4096, OOB size: 256
0x1f,0x1f,0x1f,0x1f,0x1f,0x1f,
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x000018000000
nand_read_bbt: bad block at 0x000018040000
kernel adaptive mtd mechanism applied.
mt85xx_part_tbl_init start.
check new part head sig success
mt85xx_part_tbl_init su v1 pit found !
Creating 23 MTD partitions on "NAND 512MiB 3,3V 8-bit":
0x000000100000-0x000000300000 : "boot_1"
0x000000300000-0x000000600000 : "part_info_1"
0x000000600000-0x000000900000 : "part_info_2"
0x000000900000-0x000000b00000 : "mac_addr_1"
0x000000b00000-0x000000d00000 : "mac_addr_2"
0x000000d00000-0x000000f00000 : "key_block_1"
0x000000f00000-0x000001100000 : "key_block_2"
0x000001100000-0x000001500000 : "fe_bin_1"
0x000001500000-0x000001900000 : "fe_bin_2"
0x000001900000-0x000001d00000 : "fe_test_data"
0x000001d00000-0x000002100000 : "fe_parameters"
0x000002100000-0x000002500000 : "fe_power_curve"
0x000002500000-0x000002d00000 : "kernel_1"
0x000002d00000-0x000004300000 : "kernel_2"
0x000004300000-0x000004700000 : "initrd_1"
0x000004700000-0x000010f00000 : "rootfs_normal_1"
0x000010f00000-0x000011100000 : "rootfs_enc_it_1"
0x000011100000-0x000011300000 : "upg_status"
0x000011300000-0x000011600000 : "fast_init_logo"
0x000011600000-0x000011800000 : "fast_init_param"
0x000011800000-0x000011880000 : "log_raw"
0x000011880000-0x000011900000 : "set_raw"
0x000011900000-0x00001ebc0000 : "ubi0"
mousedev: PS/2 mouse device common for all mice
uvcvideo: Unable to create debugfs directory
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
mt85xx_wdt: init wdt
mt85xx_wdt: set timeout:60
mt85xx_wdt: stop wdt
TCP: cubic registered
NET: Registered protocol family 17
Key type dns_resolver registered
VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 2
PM Init
_mt85xx_late_console_init:register console ok
ALSA device list:
  No soundcards found.
_mt85xx_uart_set_termios, baud 38400
Freeing unused kernel memory: 136K (80550000 - 80572000)
[FastBoot]Init_Start...
[init]argc = 1, mode = 0, loglevel = 0
_mt85xx_uart_set_termios, baud 38400
dbg_utility: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
[get_upg_status] success.
read_major : 10:60
UBI: attaching mtd23 to ubi0
bus clock 0 !!!
/proc/bl_info created
[BSP] register bsp device success!
CH3 Pool memory_allocate, start: 0x40000000, size: 0x02800000
CH3 Pool memory_allocate, memory[CHANNEL3].address: 0x40000000, memory[CHANNEL3].size: 0x02800000
CH(1), ptr(9fee9f00), size( 1138944), align(     256) : [-g_pvAdspFifo]
CH(1), ptr(9fe69f00), size(  524288), align(     256) : [-g_pvAdspEffsndStrmBuf]
CH(2), ptr(a0000000), size( 9177088), align( 1048576) : [+_ucAdspWorkingBuffer]
CH(2), ptr(a08c1000), size(10485760), align(    4096) : [+g_LAEbuffer]
CH(2), ptr(a12c1000), size(26214400), align(    4096) : [+s_pu1VidPbBuf]
CH(1), ptr(8f500000), size(153903104), align(    8192) : [+_pbVDecFBMainMSTemp_Y]
CH(2), ptr(a2bc2000), size(77012992), align(    8192) : [+_pbVDecFBMainMSTemp_C]
CH(2), ptr(a7534000), size(14221312), align(    1024) : [+_pbVDecWorkMainMSTemp]
CH(2), ptr(a82c4000), size(15769600), align(    8192) : [+_pbVDecDSFBMainMSTemp]
CH(2), ptr(a91ce000), size(98820096), align(    8192) : [+_pbVDecSubFBMem]
CH(2), ptr(af00c000), size(  147456), align(    2048) : [+_pbVpqMa8fMem]
0x8f500000-0xa0000000 : channel1 continuous
0x987c6000-0x9fe69f00 : channel1 dynamic
0xa0000000-0xaff00000 : channel2 continuous
0xaf030000-0xaff00000 : channel2 dynamic
0x40000000-0x42800000 : channel3 continuous
0x40000000-0x42800000 : channel3 dynamic