Advertisement
tatui

Untitled

Sep 29th, 2022
724
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 6.56 KB | Software | 0 0
  1. :~$ sudo smartctl -a /dev/sda
  2. smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.19.0-1-amd64] (local build)
  3. Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family:     Crucial/Micron Client SSDs
  7. Device Model:     CT1000MX500SSD1
  8. Serial Number:    
  9. LU WWN Device Id: 5 00a075 1e6141516
  10. Firmware Version: M3CR043
  11. User Capacity:    1.000.204.886.016 bytes [1,00 TB]
  12. Sector Sizes:     512 bytes logical, 4096 bytes physical
  13. Rotation Rate:    Solid State Device
  14. Form Factor:      2.5 inches
  15. TRIM Command:     Available
  16. Device is:        In smartctl database 7.3/5319
  17. ATA Version is:   ACS-3 T13/2161-D revision 5
  18. SATA Version is:  SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
  19. Local Time is:    Thu Sep 29 10:51:22 2022 -03
  20. SMART support is: Available - device has SMART capability.
  21. SMART support is: Enabled
  22.  
  23. === START OF READ SMART DATA SECTION ===
  24. SMART overall-health self-assessment test result: PASSED
  25.  
  26. General SMART Values:
  27. Offline data collection status:  (0x85) Offline data collection activity
  28.                     was aborted by an interrupting command from host.
  29.                     Auto Offline Data Collection: Enabled.
  30. Self-test execution status:      (   0) The previous self-test routine completed
  31.                     without error or no self-test has ever
  32.                     been run.
  33. Total time to complete Offline
  34. data collection:        (    0) seconds.
  35. Offline data collection
  36. capabilities:            (0x7b) SMART execute Offline immediate.
  37.                     Auto Offline data collection on/off support.
  38.                     Suspend Offline collection upon new
  39.                     command.
  40.                     Offline surface scan supported.
  41.                     Self-test supported.
  42.                     Conveyance Self-test supported.
  43.                     Selective Self-test supported.
  44. SMART capabilities:            (0x0003) Saves SMART data before entering
  45.                     power-saving mode.
  46.                     Supports SMART auto save timer.
  47. Error logging capability:        (0x01) Error logging supported.
  48.                     General Purpose Logging supported.
  49. Short self-test routine
  50. recommended polling time:    (   2) minutes.
  51. Extended self-test routine
  52. recommended polling time:    (  30) minutes.
  53. Conveyance self-test routine
  54. recommended polling time:    (   2) minutes.
  55. SCT capabilities:          (0x0031) SCT Status supported.
  56.                     SCT Feature Control supported.
  57.                     SCT Data Table supported.
  58.  
  59. SMART Attributes Data Structure revision number: 16
  60. Vendor Specific SMART Attributes with Thresholds:
  61. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  62.   1 Raw_Read_Error_Rate     0x002f   100   100   000    Pre-fail  Always       -       0
  63.   5 Reallocate_NAND_Blk_Cnt 0x0032   100   100   010    Old_age   Always       -       0
  64.   9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       531
  65.  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       282
  66. 171 Program_Fail_Count      0x0032   100   100   000    Old_age   Always       -       0
  67. 172 Erase_Fail_Count        0x0032   100   100   000    Old_age   Always       -       0
  68. 173 Ave_Block-Erase_Count   0x0032   099   099   000    Old_age   Always       -       13
  69. 174 Unexpect_Power_Loss_Ct  0x0032   100   100   000    Old_age   Always       -       12
  70. 180 Unused_Reserve_NAND_Blk 0x0033   000   000   000    Pre-fail  Always       -       64
  71. 183 SATA_Interfac_Downshift 0x0032   100   100   000    Old_age   Always       -       9
  72. 184 Error_Correction_Count  0x0032   100   100   000    Old_age   Always       -       0
  73. 187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
  74. 194 Temperature_Celsius     0x0022   074   059   000    Old_age   Always       -       26 (Min/Max 0/41)
  75. 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
  76. 197 Current_Pending_ECC_Cnt 0x0032   100   100   000    Old_age   Always       -       0
  77. 198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
  78. 199 UDMA_CRC_Error_Count    0x0032   100   100   000    Old_age   Always       -       36
  79. 202 Percent_Lifetime_Remain 0x0030   099   099   001    Old_age   Offline      -       1
  80. 206 Write_Error_Rate        0x000e   100   100   000    Old_age   Always       -       0
  81. 210 Success_RAIN_Recov_Cnt  0x0032   100   100   000    Old_age   Always       -       0
  82. 246 Total_LBAs_Written      0x0032   100   100   000    Old_age   Always       -       5538886208
  83. 247 Host_Program_Page_Count 0x0032   100   100   000    Old_age   Always       -       78239640
  84. 248 FTL_Program_Page_Count  0x0032   100   100   000    Old_age   Always       -       49768495
  85.  
  86. SMART Error Log Version: 1
  87. ATA Error Count: 0
  88.     CR = Command Register [HEX]
  89.     FR = Features Register [HEX]
  90.     SC = Sector Count Register [HEX]
  91.     SN = Sector Number Register [HEX]
  92.     CL = Cylinder Low Register [HEX]
  93.     CH = Cylinder High Register [HEX]
  94.     DH = Device/Head Register [HEX]
  95.     DC = Device Command Register [HEX]
  96.     ER = Error register [HEX]
  97.     ST = Status register [HEX]
  98. Powered_Up_Time is measured from power on, and printed as
  99. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  100. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  101.  
  102. Error -4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  103.   When the command that caused the error occurred, the device was in an unknown state.
  104.  
  105.   After command completion occurred, registers were:
  106.   ER ST SC SN CL CH DH
  107.   -- -- -- -- -- -- --
  108.   00 ec 00 00 00 00 00
  109.  
  110.   Commands leading to the command that caused the error were:
  111.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  112.   -- -- -- -- -- -- -- --  ----------------  --------------------
  113.   ec 00 00 00 00 00 00 00      00:00:00.000  IDENTIFY DEVICE
  114.   ec 00 00 00 00 00 00 00      00:00:00.000  IDENTIFY DEVICE
  115.   ec 00 00 00 00 00 00 00      00:00:00.000  IDENTIFY DEVICE
  116.   ec 00 00 00 00 00 00 00      00:00:00.000  IDENTIFY DEVICE
  117.   c8 00 00 00 00 00 00 00      00:00:00.000  READ DMA
  118.  
  119. SMART Self-test log structure revision number 1
  120. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  121. # 1  Short offline       Completed without error       00%       507         -
  122.  
  123. SMART Selective self-test log data structure revision number 1
  124.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  125.     1        0        0  Not_testing
  126.     2        0        0  Not_testing
  127.     3        0        0  Not_testing
  128.     4        0        0  Not_testing
  129.     5        0        0  Completed [00% left] (0-65535)
  130. Selective self-test flags (0x0):
  131.   After scanning selected spans, do NOT read-scan remainder of disk.
  132. If Selective self-test is pending on power-up, resume after 0 minute delay.
  133.  
Tags: debian
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement