API tools faq
paste
Daimonion666

Untitled

Daimonion666
Apr 26th, 2023
40
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 23.72 KB | None | 0 0
raw download clone embed print report
  1. Booting Linux on physical CPU 0x0
  2. Linux version 3.10.39 (root@twsvnnt01652-01) (gcc version 4.8.5 20150209 (prerelease) (crosstool-NG 1.21.0) ) #1 Thu Aug 11 16:37:05 CST 2022
  3. CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d
  4. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. Machine: Marvell Armada 380/381/382/385/388 (Device Tree), model: Marvell Armada 380 STG-328
  6. Memory policy: ECC disabled, Data cache writealloc
  7. On node 0 totalpages: 131072
  8. free_area_init_node: node 0, pgdat c0ec2024, node_mem_map c0f11000
  9. Normal zone: 1024 pages used for memmap
  10. Normal zone: 0 pages reserved
  11. Normal zone: 131072 pages, LIFO batch:31
  12. CPU: All CPU(s) started in SVC mode.
  13. pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  14. pcpu-alloc: [0] 0
  15. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
  16. Kernel command line: console=ttyS0,115200 ubi.mtd=4,2048 rootfstype=ubifs root=ubi0:rootfs1 rw rootdelay=2
  17. PID hash table entries: 2048 (order: 1, 8192 bytes)
  18. Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  19. Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  20. Memory: 512MB = 512MB total
  21. Memory: 504272k/504272k available, 20016k reserved, 0K highmem
  22. Virtual kernel memory layout:
  23. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  24. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  25. vmalloc : 0xe0800000 - 0xfff00000 ( 503 MB)
  26. lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  27. modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  28. .text : 0xc0008000 - 0xc081c8a8 (8275 kB)
  29. .init : 0xc081d000 - 0xc0e6bd5c (6460 kB)
  30. .data : 0xc0e6c000 - 0xc0ec30e0 ( 349 kB)
  31. .bss : 0xc0ec30e0 - 0xc0f10c70 ( 311 kB)
  32. NR_IRQS:16 nr_irqs:16 16
  33.  
  34. LSP version: linux-3.10.39-2014_T3.0p7
  35.  
  36. sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798ms
  37. L310 cache controller enabled
  38. l2x0: 16 ways, CACHE_ID 0x410054c9, AUX_CTRL 0x16070000, Cache size: 1048576 B
  39. Console: colour dummy device 80x30
  40. Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
  41. pid_max: default: 32768 minimum: 301
  42. Mount-cache hash table entries: 512
  43. CPU: Testing write buffer coherency: ok
  44. Setting up static identity map for 0xc063c590 - 0xc063c5e8
  45. mvebu-pmsu: Initializing Power Management Service Unit
  46. Initializing CPU Reset module
  47. devtmpfs: initialized
  48. mvebu-soc-id: MVEBU SoC ID=0x6810, Rev=0x4
  49. xor: measuring software checksum speed
  50. arm4regs : 2368.000 MB/sec
  51. 8regs : 1458.800 MB/sec
  52. 32regs : 1408.000 MB/sec
  53. xor: using function: arm4regs (2368.000 MB/sec)
  54. pinctrl core: initialized pinctrl subsystem
  55. NET: Registered protocol family 16
  56. DMA: preallocated 256 KiB pool for atomic coherent allocations
  57. irq: Cannot allocate irq_descs @ IRQ194, assuming pre-allocated
  58. irq: Cannot allocate irq_descs @ IRQ226, assuming pre-allocated
  59. bio: create slab <bio-0> at 0
  60. raid6: int32x1 203 MB/s
  61. raid6: int32x2 270 MB/s
  62. raid6: int32x4 283 MB/s
  63. raid6: int32x8 323 MB/s
  64. raid6: using algorithm int32x8 (323 MB/s)
  65. raid6: using intx1 recovery algorithm
  66. gpio-ms: gpio_dev = fe00000 (M: 254, m: 0)
  67. [kernel] gpio_request for GPIO[24] failed with error number: -517
  68. [kernel] gpio_request for GPIO[31] failed with error number: -517
  69. [kernel] gpio_request for GPIO[44] failed with error number: -517
  70. mvebu-pcie pcie-controller.3: PCIe0.0: link down
  71. mvebu-pcie pcie-controller.3: PCIe1.0: link down
  72. mvebu-pcie pcie-controller.3: PCI host bridge to bus 0000:00
  73. pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
  74. pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe8000000]
  75. pci_bus 0000:00: root bus resource [bus 00-ff]
  76. pci 0000:00:01.0: [11ab:7846] type 01 class 0x060400
  77. pci 0000:00:02.0: [11ab:7846] type 01 class 0x060400
  78. PCI: bus0: Fast back to back transfers disabled
  79. pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  80. pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  81. PCI: bus1: Fast back to back transfers enabled
  82. pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  83. PCI: bus2: Fast back to back transfers enabled
  84. pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
  85. pci 0000:00:01.0: PCI bridge to [bus 01]
  86. pci 0000:00:02.0: PCI bridge to [bus 02]
  87. PCI: enabling device 0000:00:01.0 (0140 -> 0143)
  88. PCI: enabling device 0000:00:02.0 (0140 -> 0143)
  89. vgaarb: loaded
  90. SCSI subsystem initialized
  91. libata version 3.00 loaded.
  92. usbcore: registered new interface driver usbfs
  93. usbcore: registered new interface driver hub
  94. usbcore: registered new device driver usb
  95. pps_core: LinuxPPS API ver. 1 registered
  96. pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  97. PTP clock support registered
  98. cfg80211: Calling CRDA to update world regulatory domain
  99. Switching to clocksource armada_370_xp_clocksource
  100. NET: Registered protocol family 2
  101. TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  102. TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  103. TCP: Hash tables configured (established 4096 bind 4096)
  104. TCP: reno registered
  105. UDP hash table entries: 256 (order: 0, 4096 bytes)
  106. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  107. NET: Registered protocol family 1
  108. RPC: Registered named UNIX socket transport module.
  109. RPC: Registered udp transport module.
  110. RPC: Registered tcp transport module.
  111. RPC: Registered tcp NFSv4.1 backchannel transport module.
  112. PCI: CLS 64 bytes, default 64
  113. VFS: Disk quotas dquot_6.5.2
  114. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  115. NFS: Registering the id_resolver key type
  116. Key type id_resolver registered
  117. Key type id_legacy registered
  118. Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  119. fuse init (API version 7.22)
  120. bio: create slab <bio-1> at 1
  121. Btrfs loaded
  122. msgmni has been set to 984
  123. async_tx: api initialized (async)
  124. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  125. io scheduler noop registered
  126. io scheduler deadline registered
  127. io scheduler cfq registered (default)
  128. armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
  129. ****** turn off all LEDs that turned on in u-boot ******
  130. ****** blink SYS LED ******
  131. mv_xor f1060800.xor: Marvell shared XOR driver
  132. mv_xor f1060800.xor: Marvell XOR: ( xor cpy intr )
  133. mv_xor f1060800.xor: freeing 1 in use descriptors!
  134. mv_xor f1060800.xor: Marvell XOR: ( crc32c )
  135. mv_xor f1060900.xor: Marvell shared XOR driver
  136. mv_xor f1060900.xor: Marvell XOR: ( xor cpy intr )
  137. mv_xor f1060900.xor: freeing 1 in use descriptors!
  138. mv_xor f1060900.xor: Marvell XOR: ( crc32c )
  139. Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  140. f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 44) is a 16550A
  141. console [ttyS0] enabled
  142. brd: module loaded
  143. loop: module loaded
  144. ahci_mv f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  145. ahci_mv f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
  146. scsi0 : ahci_mv_platform
  147. scsi1 : ahci_mv_platform
  148. ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 58
  149. ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 58
  150. armada-nand f10d0000.nand: Initialize HAL based NFC in 8bit mode with DMA Disabled using BCH 4bit ECC
  151. NAND device: Manufacturer ID: 0xc2, Chip ID: 0xda (Macronix NAND 256MiB 3,3V 8-bit), 256MiB, page size: 2048, OOB size: 64
  152. Bad block table found at page 131008, version 0x01
  153. Bad block table found at page 130944, version 0x01
  154. nand_read_bbt: bad block at 0x00000acc0000
  155. nand_read_bbt: bad block at 0x00000ea60000
  156. 7 ofpart partitions found on MTD device armada-nand
  157. Creating 7 MTD partitions on "armada-nand":
  158. 0x000000000000-0x000000200000 : "U-Boot"
  159. 0x000000200000-0x000000400000 : "U-Boot env"
  160. 0x000000400000-0x000000e00000 : "Config"
  161. 0x000000e00000-0x000001d00000 : "Kernel-1"
  162. 0x000001d00000-0x000008700000 : "RootFS-1"
  163. 0x000008700000-0x000009600000 : "Kernel-2"
  164. 0x000009600000-0x000010000000 : "RootFS-2"
  165. m25p80 spi0.0: unrecognized JEDEC id ffffff
  166. SoC: model = 0x6810, revision = 0x4
  167. o 3 Giga ports supported
  168. o SKB recycle supported for SWF (Disabled)
  169. o NETA acceleration mode 1
  170. o RX Queue support: 8 Queues * 256 Descriptors
  171. o TX Queue support: 8 Queues * 532 Descriptors
  172. o GSO supported
  173. o GRO supported
  174. o Receive checksum offload supported
  175. o Transmit checksum offload supported
  176. o Driver ERROR statistics enabled
  177. o Driver INFO statistics enabled
  178. o Driver DEBUG statistics enabled
  179.  
  180. port #0: is_sgmii=0, is_rgmii=1, phy_addr=1
  181. o Loading network interface(s) for port #0: cpu_mask=0x1, tx_csum_limit=9800
  182.  
  183. o Port 0 is connected to Linux netdevice
  184. o eth0, ifindex = 2, GbE port = 0
  185. giga p=0: mtu=1500, mac=00:50:43:02:02:01 (platform)
  186.  
  187. libphy: orion_mdio_bus: probed
  188. e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
  189. e1000: Copyright (c) 1999-2006 Intel Corporation.
  190. e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
  191. e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
  192. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  193. ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
  194. ehci-pci: EHCI PCI platform driver
  195. ehci-orion: EHCI orion driver
  196. Initializing Orion-SoC USB Host Controller
  197. orion-ehci f1058000.usb: EHCI Host Controller
  198. orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
  199. orion-ehci f1058000.usb: reset hcs_params 0x10011 dbg=0 ind cc=0 pcc=0 ordered ports=1
  200. orion-ehci f1058000.usb: reset hcc_params 0006 thresh 0 uframes 256/512/1024 park
  201. orion-ehci f1058000.usb: park 0
  202. orion-ehci f1058000.usb: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
  203. orion-ehci f1058000.usb: irq 50, io mem 0xf1058000
  204. orion-ehci f1058000.usb: init command 0010005 (park)=0 ithresh=1 period=512 RUN
  205. orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
  206. usb usb1: default language 0x0409
  207. usb usb1: udev 1, busnum 1, minor = 0
  208. usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  209. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  210. usb usb1: Product: EHCI Host Controller
  211. usb usb1: Manufacturer: Linux 3.10.39 ehci_hcd
  212. usb usb1: SerialNumber: f1058000.usb
  213. usb usb1: usb_probe_device
  214. usb usb1: configuration #1 chosen from 1 choice
  215. usb usb1: adding 1-0:1.0 (config #1, interface 0)
  216. hub 1-0:1.0: usb_probe_interface
  217. hub 1-0:1.0: usb_probe_interface - got id
  218. hub 1-0:1.0: USB hub found
  219. hub 1-0:1.0: 1 port detected
  220. hub 1-0:1.0: standalone hub
  221. hub 1-0:1.0: individual port power switching
  222. hub 1-0:1.0: individual port over-current protection
  223. hub 1-0:1.0: Single TT
  224. hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
  225. hub 1-0:1.0: power on to power good time: 20ms
  226. hub 1-0:1.0: local power source is good
  227. hub 1-0:1.0: enabling power on all ports
  228. xhci-hcd f10f0000.usb3: xHCI Host Controller
  229. xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
  230. xhci-hcd f10f0000.usb3: irq 48, io mem 0xf10f0000
  231. usb usb2: default language 0x0409
  232. usb usb2: udev 1, busnum 2, minor = 128
  233. usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  234. usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  235. usb usb2: Product: xHCI Host Controller
  236. usb usb2: Manufacturer: Linux 3.10.39 xhci-hcd
  237. usb usb2: SerialNumber: f10f0000.usb3
  238. usb usb2: usb_probe_device
  239. usb usb2: configuration #1 chosen from 1 choice
  240. xHCI xhci_add_endpoint called for root hub
  241. xHCI xhci_check_bandwidth called for root hub
  242. usb usb2: adding 2-0:1.0 (config #1, interface 0)
  243. hub 2-0:1.0: usb_probe_interface
  244. hub 2-0:1.0: usb_probe_interface - got id
  245. hub 2-0:1.0: USB hub found
  246. hub 2-0:1.0: 1 port detected
  247. hub 2-0:1.0: standalone hub
  248. hub 2-0:1.0: no power switching (usb 1.0)
  249. hub 2-0:1.0: individual port over-current protection
  250. hub 2-0:1.0: Single TT
  251. hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
  252. hub 2-0:1.0: power on to power good time: 20ms
  253. hub 2-0:1.0: local power source is good
  254. hub 2-0:1.0: trying to enable port power on non-switchable hub
  255. xhci-hcd f10f0000.usb3: xHCI Host Controller
  256. xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
  257. usb usb3: skipped 1 descriptor after endpoint
  258. usb usb3: default language 0x0409
  259. usb usb3: udev 1, busnum 3, minor = 256
  260. usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
  261. usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  262. usb usb3: Product: xHCI Host Controller
  263. usb usb3: Manufacturer: Linux 3.10.39 xhci-hcd
  264. usb usb3: SerialNumber: f10f0000.usb3
  265. usb usb3: usb_probe_device
  266. usb usb3: configuration #1 chosen from 1 choice
  267. xHCI xhci_add_endpoint called for root hub
  268. xHCI xhci_check_bandwidth called for root hub
  269. usb usb3: adding 3-0:1.0 (config #1, interface 0)
  270. hub 3-0:1.0: usb_probe_interface
  271. hub 3-0:1.0: usb_probe_interface - got id
  272. hub 3-0:1.0: USB hub found
  273. hub 3-0:1.0: 1 port detected
  274. hub 3-0:1.0: standalone hub
  275. hub 3-0:1.0: no power switching (usb 1.0)
  276. hub 3-0:1.0: individual port over-current protection
  277. hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
  278. hub 3-0:1.0: power on to power good time: 20ms
  279. hub 3-0:1.0: local power source is good
  280. hub 3-0:1.0: trying to enable port power on non-switchable hub
  281. xhci-hcd f10f8000.usb3: xHCI Host Controller
  282. xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
  283. xhci-hcd f10f8000.usb3: irq 49, io mem 0xf10f8000
  284. usb usb4: default language 0x0409
  285. usb usb4: udev 1, busnum 4, minor = 384
  286. usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
  287. usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  288. usb usb4: Product: xHCI Host Controller
  289. usb usb4: Manufacturer: Linux 3.10.39 xhci-hcd
  290. usb usb4: SerialNumber: f10f8000.usb3
  291. hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
  292. usb usb4: usb_probe_device
  293. usb usb4: configuration #1 chosen from 1 choice
  294. xHCI xhci_add_endpoint called for root hub
  295. xHCI xhci_check_bandwidth called for root hub
  296. usb usb4: adding 4-0:1.0 (config #1, interface 0)
  297. hub 4-0:1.0: usb_probe_interface
  298. hub 4-0:1.0: usb_probe_interface - got id
  299. hub 4-0:1.0: USB hub found
  300. hub 4-0:1.0: 1 port detected
  301. hub 4-0:1.0: standalone hub
  302. hub 4-0:1.0: no power switching (usb 1.0)
  303. hub 4-0:1.0: individual port over-current protection
  304. hub 4-0:1.0: Single TT
  305. hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns)
  306. hub 4-0:1.0: power on to power good time: 20ms
  307. hub 4-0:1.0: local power source is good
  308. hub 4-0:1.0: trying to enable port power on non-switchable hub
  309. xhci-hcd f10f8000.usb3: xHCI Host Controller
  310. xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
  311. usb usb5: skipped 1 descriptor after endpoint
  312. usb usb5: default language 0x0409
  313. usb usb5: udev 1, busnum 5, minor = 512
  314. usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
  315. usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  316. usb usb5: Product: xHCI Host Controller
  317. usb usb5: Manufacturer: Linux 3.10.39 xhci-hcd
  318. usb usb5: SerialNumber: f10f8000.usb3
  319. hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
  320. usb usb5: usb_probe_device
  321. usb usb5: configuration #1 chosen from 1 choice
  322. xHCI xhci_add_endpoint called for root hub
  323. xHCI xhci_check_bandwidth called for root hub
  324. usb usb5: adding 5-0:1.0 (config #1, interface 0)
  325. hub 5-0:1.0: usb_probe_interface
  326. hub 5-0:1.0: usb_probe_interface - got id
  327. hub 5-0:1.0: USB hub found
  328. hub 5-0:1.0: 1 port detected
  329. hub 5-0:1.0: standalone hub
  330. hub 5-0:1.0: no power switching (usb 1.0)
  331. hub 5-0:1.0: individual port over-current protection
  332. hub 5-0:1.0: TT requires at most 8 FS bit times (666 ns)
  333. hub 5-0:1.0: power on to power good time: 20ms
  334. hub 5-0:1.0: local power source is good
  335. hub 5-0:1.0: trying to enable port power on non-switchable hub
  336. usbcore: registered new interface driver usblp
  337. usbcore: registered new interface driver usb-storage
  338. mousedev: PS/2 mouse device common for all mice
  339. hub 3-0:1.0: state 7 ports 1 chg 0000 evt 0000
  340. mvebu-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0
  341. i2c /dev entries driver
  342. md: linear personality registered for level -1
  343. md: raid0 personality registered for level 0
  344. md: raid1 personality registered for level 1
  345. md: raid6 personality registered for level 6
  346. md: raid5 personality registered for level 5
  347. md: raid4 personality registered for level 4
  348. hub 4-0:1.0: state 7 ports 1 chg 0000 evt 0000
  349. device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
  350. dm_crypt using the OCF package.
  351. cpuidle: using governor ladder
  352. sdhci: Secure Digital Host Controller Interface driver
  353. sdhci: Copyright(c) Pierre Ossman
  354. hub 5-0:1.0: state 7 ports 1 chg 0000 evt 0000
  355. mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA
  356. sdhci-pltfm: SDHCI platform and OF driver helper
  357. armada-cesa-ocf f109d000.crypto: mv_get_cesa_resources: Total CESA HW channels supported 2
  358. armada-cesa-ocf f109d000.crypto: mv_get_cesa_resources: CESA feature: int_coalescing(1)
  359. armada-cesa-ocf f109d000.crypto: mv_get_cesa_resources threshold 0x2, threshold_time 0xff
  360. mvCesaInit: channels=2, session=640, queue=256
  361. armada-cesa-ocf f109d000.crypto: cesa_ocf_probe: CESA driver operate in ocf(0) mode
  362. ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  363. cesadev_init(c0836b3c)
  364. ata1.00: ATA-9: WDC WD60EFRX-68L0BN1, 82.00A82, max UDMA/133
  365. ata1.00: 11721045168 sectors, multi 0: LBA48 NCQ (depth 31/32)
  366. usbcore: registered new interface driver usbhid
  367. usbhid: USB HID core driver
  368. ata1.00: configured for UDMA/133
  369. scsi 0:0:0:0: Direct-Access ATA WDC WD60EFRX-68L 82.0 PQ: 0 ANSI: 5
  370. TCP: cubic registered
  371. NET: Registered protocol family 10
  372. sit: IPv6 over IPv4 tunneling driver
  373. NET: Registered protocol family 17
  374. 8021q: 802.1Q VLAN Support v1.8
  375. Key type dns_resolver registered
  376. VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  377. ******** sd_probe: turn_off LED_HDD1 ********
  378. ******** sd_probe: turn_on LED_HDD1 WHITE********
  379. UBI: attaching mtd4 to ubi0
  380. sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
  381. sd 0:0:0:0: [sda] 4096-byte physical blocks
  382. sd 0:0:0:0: Attached scsi generic sg0 type 0
  383. sd 0:0:0:0: [sda] Write Protect is off
  384. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  385. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  386. sda: sda1 sda2 sda3
  387. sd 0:0:0:0: [sda] Attached SCSI disk
  388. UBI: scanning is finished
  389. UBI: attached mtd4 (name "RootFS-1", size 106 MiB) to ubi0
  390. UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  391. UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  392. UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
  393. UBI: good PEBs: 848, bad PEBs: 0, corrupted PEBs: 0
  394. UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
  395. UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 923462809
  396. UBI: available PEBs: 0, total reserved PEBs: 848, PEBs reserved for bad PEB handling: 40
  397. mvebu-rtc f10a3800.rtc: setting system clock to 2023-04-26 05:17:33 UTC (1682486253)
  398. UBI: background thread "ubi_bgt0d" started, PID 1173
  399. ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  400. ata2.00: ATA-9: WDC WD60EFRX-68L0BN1, 82.00A82, max UDMA/133
  401. ata2.00: 11721045168 sectors, multi 0: LBA48 NCQ (depth 31/32)
  402. ata2.00: configured for UDMA/133
  403. scsi 1:0:0:0: Direct-Access ATA WDC WD60EFRX-68L 82.0 PQ: 0 ANSI: 5
  404. ******** sd_probe: turn_off LED_HDD2 ********
  405. ******** sd_probe: turn_on LED_HDD2 WHITE********
  406. sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
  407. sd 1:0:0:0: [sdb] 4096-byte physical blocks
  408. sd 1:0:0:0: Attached scsi generic sg1 type 0
  409. sd 1:0:0:0: [sdb] Write Protect is off
  410. sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  411. sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  412. sdb: sdb1 sdb2 sdb3
  413. sd 1:0:0:0: [sdb] Attached SCSI disk
  414. Freeing unused kernel memory: 6456K (c081d000 - c0e6b000)
  415. eth0: mac address changed
  416. bmPoolId = 0 has unknown buf_size
  417. pool #0: pkt_size=1536, buf_size=1600 - 4096 of 4096 buffers added
  418. egiga0: link up
  419. egiga0: started
  420. egiga0: link down
  421. egiga0: link up, full duplex, speed 1 Gbps
  422. egiga0: link down
  423. egiga0: link up, full duplex, speed 1 Gbps
  424. UBI: detaching mtd4 from ubi0
  425. UBI: mtd4 is detached from ubi0
  426. UBI: attaching mtd4 to ubi4
  427. UBI: scanning is finished
  428. UBI: attached mtd4 (name "RootFS-1", size 106 MiB) to ubi4
  429. UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  430. UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  431. UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
  432. UBI: good PEBs: 848, bad PEBs: 0, corrupted PEBs: 0
  433. UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
  434. UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 923462809
  435. UBI: available PEBs: 0, total reserved PEBs: 848, PEBs reserved for bad PEB handling: 40
  436. UBI: background thread "ubi_bgt4d" started, PID 1380
  437. UBIFS: mounted UBI device 4, volume 0, name "ubi_rootfs1", R/O mode
  438. UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  439. UBIFS: FS size: 100691968 bytes (96 MiB, 793 LEBs), journal size 5079040 bytes (4 MiB, 40 LEBs)
  440. UBIFS: reserved for root: 4755930 bytes (4644 KiB)
  441. UBIFS: media format: w4/r0 (latest is w4/r0), UUID 7B82EA50-5F39-42D0-BE45-5BFF9A9B056C, small LPT model
  442. md: md0 stopped.
  443. md: bind<sdb1>
  444. md: bind<sda1>
  445. md/raid1:md0: active with 2 out of 2 mirrors
  446. md0: detected capacity change from 0 to 2045706240
  447. md: md1 stopped.
  448. md: bind<sdb2>
  449. md: bind<sda2>
  450. md/raid1:md1: active with 2 out of 2 mirrors
  451. md1: detected capacity change from 0 to 2046754816
  452. md1: unknown partition table
  453. Adding 1998780k swap on /dev/md1. Priority:-1 extents:1 across:1998780k
  454. md0: unknown partition table
  455. EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
  456. EXT4-fs (md0): re-mounted. Opts: (null)
  457. EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
  458. EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
  459. UBI: attaching mtd2 to ubi2
  460. UBI: scanning is finished
  461. UBI: attached mtd2 (name "Config", size 10 MiB) to ubi2
  462. UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  463. UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  464. UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
  465. UBI: good PEBs: 80, bad PEBs: 0, corrupted PEBs: 0
  466. UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
  467. UBI: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 2407843209
  468. UBI: available PEBs: 0, total reserved PEBs: 80, PEBs reserved for bad PEB handling: 40
  469. UBI: background thread "ubi_bgt2d" started, PID 1566
  470. UBIFS: background thread "ubifs_bgt2_0" started, PID 1570
  471. UBIFS: mounted UBI device 2, volume 0, name "ubi_config"
  472. UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  473. UBIFS: FS size: 3301376 bytes (3 MiB, 26 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
  474. UBIFS: reserved for root: 155931 bytes (152 KiB)
  475. UBIFS: media format: w4/r0 (latest is w4/r0), UUID 14542ECE-05F6-44BA-812C-5C1E651A461D, small LPT model
  476. NTFS driver 2.1.30 [Flags: R/O MODULE].
  477. tntfs: module license 'Commercial. For support email ntfs-support@tuxera.com.' taints kernel.
  478. Disabling lock debugging due to kernel taint
  479. Tuxera NTFS driver 3015.1.29 [Flags: R/W MODULE].
  480. PPP generic driver version 2.4.2
  481. PPP MPPE Compression module registered
  482. PPP Deflate Compression module registered
  483. NET: Registered protocol family 24
  484. PPP BSD Compression module registered
  485. md: md2 stopped.
  486. md: bind<sdb3>
  487. md: bind<sda3>
  488. md2: detected capacity change from 0 to 11994157416448
  489. md2: unknown partition table
  490. bio: create slab <bio-2> at 2
  491. EXT4-fs (dm-1): warning: mounting fs with errors, running e2fsck is recommended
  492. EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: usrquota,data=ordered,barrier=1
  493. EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
  494. Rounding down aligned max_sectors from 4294967295 to 4294967288
  495. egiga0: link down
  496. egiga0: link up, full duplex, speed 1 Gbps
  497. IPv6: ADDRCONF(NETDEV_CHANGE): egiga0: link becomes ready
  498. EXT4-fs (dm-1): error count: 10
  499. EXT4-fs (dm-1): initial error at 1626038041: ext4_mb_generate_buddy:755
  500. EXT4-fs (dm-1): last error at 1676710927: ext4_mb_generate_buddy:755
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!