API tools faq
paste
Advertisement
Astralix

RK3188 First Android start

Astralix
Jun 23rd, 2013
234
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 24.94 KB | None | 0 0
raw download clone embed print report
  1. DDR Version 1.04 20130517
  2. In
  3. SRX
  4. DDR3
  5. 300MHz
  6. Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=8 Size=2048MB
  7. OUT
  8. BUILD=====5
  9. Set g_BootRockusb=TRUE
  10. F:32 1061 2 0 40
  11. GetRemapTbl flag = 0
  12. OK! 49767
  13. unsigned!
  14. SecureBootEn = 0 0
  15. Boot ver: 2013-05-18#1.20
  16. UsbBoot,61157
  17. UsbHook,714061
  18. GetRemapTbl flag = 1
  19. powerOn,3090493
  20. 3126669 UsbConnected
  21. DDR Version 1.04 20130517
  22. In
  23. SRX
  24. DDR3
  25. 300MHz
  26. Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=8 Size=2048MB
  27. OUT
  28. BUILD=====5
  29. F:32 1061 2 0 40
  30. GetRemapTbl flag = 0
  31. OK! 49732
  32. unsigned!
  33. SecureBootEn = 0 0
  34. Boot ver: 2013-05-18#1.20
  35. start_linux=====61358
  36. 716676 Starting kernel...@0x60408000
  37.  
  38. [ 0.000000] Initializing cgroup subsys cpuset
  39. [ 0.000000] Initializing cgroup subsys cpu
  40. [ 0.000000] Linux version 3.0.36+ (uprinz@BigBox) (gcc version 4.4.3 (GCC) ) #13 SMP PREEMPT Sun Jun 23 18:49:36 CEST 2013
  41. [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
  42. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  43. [ 0.000000] Machine: RK30board
  44. [ 0.000000] memory reserve: Memory(base:0x91800000 size:80M) reserved for <ion>
  45. [ 0.000000] memory reserve: Memory(base:0x90000000 size:24M) reserved for <fb0 buf>
  46. [ 0.000000] memory reserve: Total reserved 104M
  47. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  48. [ 0.000000] bootconsole [earlycon0] enabled
  49. [ 0.000000] CPU SRAM: copied sram code from c0bd3000 to fef00100 - fef02190
  50. [ 0.000000] CPU SRAM: copied sram data from c0bd5090 to fef02190 - fef028f0
  51. [ 0.000000] sram_log: 4q ?& : 4q ?) !?, # 0q *! ! 3q @ 3q
  52. [ 0.000000] CLKDATA_MSG: pll_flag = 0x00
  53. [ 0.000000] L310 cache controller enabled
  54. [ 0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B
  55. [ 0.000000] DDR DEBUG: version 1.00 20130427
  56. [ 0.000000] DDR DEBUG: DDR3 Device
  57. [ 0.000000] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Total Capability=2048MB
  58. [ 0.000000] DDR DEBUG: init success!!! freq=300MHz
  59. [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x3, DGSL=1 extra clock, DGPS=90
  60. [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x3, DGSL=1 extra clock, DGPS=90
  61. [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=0 extra clock, DGPS=360
  62. [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=0 extra clock, DGPS=360
  63. [ 0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
  64. [ 0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
  65. [ 0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
  66. [ 0.000000] Boot mode: REBOOT (6) flag: NORMAL (0xc3524200)
  67. [ 0.000000] PERCPU: Embedded 7 pages/cpu @c313f000 s7136 r8192 d13344 u32768
  68. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 493568
  69. [ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00130000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00006000@0x00004000(kernel),0x00008000@0x0000A000(boot),0x00010000@0x00012000(recovery),0x00020000@0x00022000(backup),0x00040000@0x00042000(cache),0x00400000@0x00082000(userdata),0x00002000@0x00482000(kpanic),0x00100000@0x00484000(system),-@0x00584000(user) bootver=2013-05-18#1.20 firmware_ver=4.1.1
  70. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  71. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  72. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  73. [ 0.000000] allocated 8388608 bytes of page_cgroup
  74. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  75. [ 0.000000] Memory: 768MB 1176MB = 1944MB total
  76. [ 0.000000] Memory: 1945716k/1945716k available, 151436k reserved, 1204224K highmem
  77. [ 0.000000] Virtual kernel memory layout:
  78. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  79. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  80. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  81. [ 0.000000] vmalloc : 0xf7000000 - 0xfe800000 ( 120 MB)
  82. [ 0.000000] lowmem : 0xc0000000 - 0xf6800000 ( 872 MB)
  83. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  84. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  85. [ 0.000000] .init : 0xc0408000 - 0xc0510000 (1056 kB)
  86. [ 0.000000] .text : 0xc0510000 - 0xc0b71ca0 (6536 kB)
  87. [ 0.000000] .data : 0xc0b72000 - 0xc0bd2e28 ( 388 kB)
  88. [ 0.000000] .bss : 0xc0bd6024 - 0xc15bdc50 (10144 kB)
  89. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  90. [ 0.000000] Preemptible hierarchical RCU implementation.
  91. [ 0.000000] NR_IRQS:352
  92. [ 0.000000] rk30_gpio_init: 128 gpio irqs in 4 banks
  93. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  94. [ 0.000000] rk_timer: version 1.2
  95. [ 0.000000] Console: colour dummy device 80x30
  96. [ 0.008634] Calibrating delay loop (skipped) preset value.. 1631.46 BogoMIPS (lpj=8157341)
  97. [ 0.017700] pid_max: default: 32768 minimum: 301
  98. [ 0.022994] Mount-cache hash table entries: 512
  99. [ 0.028529] Initializing cgroup subsys debug
  100. [ 0.033214] Initializing cgroup subsys cpuacct
  101. [ 0.038134] Initializing cgroup subsys memory
  102. [ 0.042948] Initializing cgroup subsys devices
  103. [ 0.047854] Initializing cgroup subsys freezer
  104. [ 0.052768] Initializing cgroup subsys blkio
  105. [ 0.057481] CPU: Testing write buffer coherency: ok
  106. [ 0.143561] CPU1: Booted secondary processor
  107. [ 0.183552] CPU2: Booted secondary processor
  108. [ 0.223551] CPU3: Booted secondary processor
  109. [ 0.223592] Brought up 4 CPUs
  110. [ 0.241007] SMP: Total of 4 processors activated (6525.87 BogoMIPS).
  111. [ 0.248373] devtmpfs: initialized
  112. [ 0.258360] NET: Registered protocol family 16
  113. [ 0.263339] last_log: 0xef8e0000 map to 0xf7004000 and copy to 0xc0bda180 (version 2.1)
  114. [ 0.276436] lcdc0 is used as primary display device contoller!
  115. [ 0.282950] warning:lcdc1 not add to system!
  116. [ 0.388008] rk29sdk_wifi_bt_gpio_control_init: init finished
  117. <hit enter to activate fiq debugger>
  118. [ 0.395468] console [ttyFIQ0] enabled, bootconsole disabled
  119. [ 0.395468] console [ttyFIQ0] enabled, bootconsole disabled
  120. [ 0.404606] Registered FIQ tty driver ef83ecc0
  121. [ 0.417757] bio: create slab <bio-0> at 0
  122. [ 0.422189] SCSI subsystem initialized
  123. [ 0.422419] usbcore: registered new interface driver usbfs
  124. [ 0.422532] usbcore: registered new interface driver hub
  125. [ 0.436769] usbcore: registered new device driver usb
  126. [ 0.437141] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
  127. [ 0.447213] rk30-adc rk30-adc: rk30 adc: driver initialized
  128. [ 0.447504] Advanced Linux Sound Architecture Driver Version 1.0.24.
  129. [ 0.447959] Bluetooth: Core ver 2.16
  130. [ 0.448028] NET: Registered protocol family 31
  131. [ 0.448064] Bluetooth: HCI device and connection manager initialized
  132. [ 0.448112] Bluetooth: HCI socket layer initialized
  133. [ 0.448150] Bluetooth: L2CAP socket layer initialized
  134. [ 0.448201] Bluetooth: SCO socket layer initialized
  135. [ 0.449294] rk fb probe ok!
  136. [ 0.449370] Switching to clocksource rk_timer
  137. [ 0.453014] Switched to NOHz mode on CPU #0
  138. [ 0.453595] Switched to NOHz mode on CPU #3
  139. [ 0.453613] Switched to NOHz mode on CPU #1
  140. [ 0.453627] Switched to NOHz mode on CPU #2
  141. [ 0.456661] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xf702c000
  142. [ 0.456748] fb0:win0
  143. [ 0.456754] fb1:win1
  144. [ 0.456759] fb2:win2
  145. [ 0.456847] rk3188 lcdc0 clk enable...
  146. [ 0.456892] rk3188 lcdc0 clk disable...
  147. [ 0.516542] fb0:phy:90000000>>vir:f8000000>>len:0x1800000
  148. [ 0.516919] rk_fb_register>>>>>fb0
  149. [ 0.517126] rk_fb_register>>>>>fb1
  150. [ 0.517175] rk3188 lcdc0 clk enable...
  151. [ 0.517214] lcdc0: dclk:148500000>>fps:60
  152. [ 0.517250] rk30-lcdc rk30-lcdc.0: rk3188_load_screen for lcdc0 ok!
  153. [ 0.517295] lcdc0 wakeup from standby!
  154. [ 0.517325] lcdc0 win0 open,atv layer:1
  155. [ 0.517356] lcdc0: dclk:148500000>>fps:60
  156. [ 0.517388] rk30-lcdc rk30-lcdc.0: rk3188_load_screen for lcdc0 ok!
  157. [ 0.536651] rk3188 lcdc0 probe ok!
  158. [ 0.536788] HDMI: hdmi_register() - video source 0 display 0
  159. [ 0.537070] HDMI: hdmi_submit_work event 0100 delay 0
  160. [ 0.537213] HDMI:
  161. [ 0.537219] hdmi_work_queue() - evt= 1 0
  162. [ 0.537264] HDMI: hdmi_work_queue() - exit
  163. [ 0.537273]
  164. [ 0.601758] cfg80211: Calling CRDA to update world regulatory domain
  165. [ 0.647144] HDMI: hdmi_submit_work event 0404 delay 10
  166. [ 0.647189] IT66121 probe success.
  167. [ 0.649479] HDMI:
  168. [ 0.649485] hdmi_work_queue() - evt= 4 4
  169. [ 0.649534] HDMI: hdmi_work_queue() - hpd is 2 hotplug is 0
  170. [ 0.649576] HDMI: hdmi_wq_insert
  171. [ 0.656553] HDMI: hdmi_wq_parse_edid
  172. [ 0.674054] NET: Registered protocol family 2
  173. [ 0.674212] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  174. [ 0.674655] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  175. [ 0.676542] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  176. [ 0.677661] TCP: Hash tables configured (established 131072 bind 65536)
  177. [ 0.677711] TCP reno registered
  178. [ 0.677742] UDP hash table entries: 512 (order: 2, 16384 bytes)
  179. [ 0.677813] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  180. [ 0.678201] NET: Registered protocol family 1
  181. [ 0.678431] RK29 Backlight Driver Initialized.
  182. [ 0.678697] Unpacking initramfs...
  183. [ 0.740178] Freeing initrd memory: 1216K
  184. [ 0.740287] PMU: registered new PMU device of type 0
  185. [ 0.740448] DVFS ERR: gpu can't get regulator in clk_enable_dvfs
  186. [ 0.740502] DVFS ERR: ddr can't get regulator in clk_enable_dvfs
  187. [ 0.740556] DVFS ERR: cpu can't get regulator in clk_enable_dvfs
  188. [ 0.767263] rk3188 cpufreq version 2.0, suspend freq 816 MHz
  189. [ 0.767633] Loaded driver for PL330 DMAC-1 rk29-pl330
  190. [ 0.767674] DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  191. [ 0.767870] Loaded driver for PL330 DMAC-2 rk29-pl330
  192. [ 0.767912] DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
  193. [ 0.795525] highmem bounce pool size: 64 pages
  194. [ 0.795734] ashmem: initialized
  195. [ 0.804818] fuse init (API version 7.16)
  196. [ 0.805107] msgmni has been set to 1450
  197. [ 0.813491] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  198. [ 0.813551] io scheduler noop registered
  199. [ 0.813586] io scheduler deadline registered
  200. [ 0.813660] io scheduler cfq registered (default)
  201. [ 0.813693] io scheduler vr registered
  202. [ 0.813720] io scheduler sio registered
  203. [ 0.841519] rga: Driver loaded succesfully
  204. [ 0.841763] rk_serial.c v1.3 2012-12-14
  205. [ 0.841907] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0
  206. [ 0.903924] ******** Show Sink Info ********
  207. [ 0.903991] Support video mode:
  208. [ 0.904045] 1920x1080p@60Hz.
  209. [ 0.904085] 1920x1080p@50Hz.
  210. [ 0.904125] 1280x720p@60Hz.
  211. [ 0.904164] 1280x720p@50Hz.
  212. [ 0.904203] 720x576p@50Hz.
  213. [ 0.904240] 720x480p@60Hz.
  214. [ 0.904278] Support audio type: LPCM
  215. [ 0.904325] Support audio sample rate:
  216. [ 0.904372] 32000
  217. [ 0.904400] 44100
  218. [ 0.904429] 48000
  219. [ 0.904459] Support audio word lenght:
  220. [ 0.904505] 16bit
  221. [ 0.904534] 20bit
  222. [ 0.904563] 24bit
  223. [ 0.904592] ******** Show Sink Info ********
  224. [ 0.904647] HDMI: hdmi_wq_set_video
  225. [ 0.904714] lcdc0: dclk:148500000>>fps:60
  226. [ 0.904777] rk30-lcdc rk30-lcdc.0: rk3188_load_screen for lcdc0 ok!
  227. [ 0.929511] rk_serial rk_serial.0: membase 0xf704c000
  228. [ 0.929796] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3
  229. [ 0.958922] HDMI: hdmi_wq_set_audio
  230. [ 0.983281] HDMI: hdmi_wq_set_output mute 0
  231. [ 0.983313] HDMI: hdmi_work_queue() - exit
  232. [ 0.983321]
  233. [ 1.089505] rk_serial rk_serial.3: membase 0xf7050000
  234. [ 1.089988] [drm] Initialized drm 1.1.0 20060810
  235. [ 1.090441] Rockchip ion module(version: 1.0) is successfully loaded
  236. [ 1.097091] loop: module loaded
  237. [ 1.097207] Android kernel panic handler initialized (bind=kpanic)
  238. [ 1.143812] HDMI: hdmi_submit_work event 0404 delay 10
  239. [ 1.149517] HDMI:
  240. [ 1.149529] hdmi_work_queue() - evt= 4 4
  241. [ 1.149612] HDMI: hdmi_work_queue() - hpd is 2 hotplug is 2
  242. [ 1.149682] HDMI: hdmi_work_queue() - exit
  243. [ 1.149699]
  244. [ 2.099997] Enter tcc_bt_init_module
  245. [ 2.100177] tcc_bt_probe.
  246. [ 2.100230] tcc bt wakeis busy!
  247. [ 2.100296] tcc_bt_dev: probe of tcc_bt_dev failed with error -1
  248. [ 2.102184] PPP generic driver version 2.4.2
  249. [ 2.102600] PPP Deflate Compression module registered
  250. [ 2.102670] PPP BSD Compression module registered
  251. [ 2.118671] PPP MPPE Compression module registered
  252. [ 2.118748] NET: Registered protocol family 24
  253. [ 2.118949] usbcore: registered new interface driver asix
  254. [ 2.119112] usbcore: registered new interface driver cdc_ether
  255. [ 2.119272] usbcore: registered new interface driver net1080
  256. [ 2.119656] usbcore: registered new interface driver cdc_subset
  257. [ 2.119857] usbcore: registered new interface driver zaurus
  258. [ 2.119956] cdc_ncm: 04-Aug-2011
  259. [ 2.120091] usbcore: registered new interface driver cdc_ncm
  260. [ 2.120161] Rockchip WiFi SYS interface (V1.00) ...
  261. [ 2.120307] Initializing USB Mass Storage driver...
  262. [ 2.120489] usbcore: registered new interface driver usb-storage
  263. [ 2.120562] USB Mass Storage support registered.
  264. [ 2.120887] usbcore: registered new interface driver usbserial
  265. [ 2.121039] USB Serial support registered for generic
  266. [ 2.121212] usbcore: registered new interface driver usbserial_generic
  267. [ 2.121291] usbserial: USB Serial Driver core
  268. [ 2.121424] USB Serial support registered for GSM modem (1-port)
  269. [ 2.121609] usbcore: registered new interface driver option
  270. [ 2.121680] option: v0.7.2:USB Driver for GSM modems
  271. [ 2.343616] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
  272. [ 2.343687] usb20_otg usb20_otg: DWC OTG Controller
  273. [ 2.343809] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
  274. [ 2.343884] usb20_otg usb20_otg: irq 48, io mem 0x00000000
  275. [ 2.343945] DWC_OTG: Init: Port Power? op_state=1
  276. [ 2.343979] DWC_OTG: Init: Power Port (0)
  277. [ 2.344054] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  278. [ 2.344103] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  279. [ 2.344150] usb usb1: Product: DWC OTG Controller
  280. [ 2.344183] usb usb1: Manufacturer: Linux 3.0.36+ dwc_otg_hcd
  281. [ 2.344223] usb usb1: SerialNumber: usb20_otg
  282. [ 2.344638] hub 1-0:1.0: USB hub found
  283. [ 2.344676] hub 1-0:1.0: 1 port detected
  284. [ 2.347356] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xf7100000
  285. [ 2.558197] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
  286. [ 2.558242] usb20_host usb20_host: DWC OTG Controller
  287. [ 2.558316] usb20_host usb20_host: new USB bus registered, assigned bus number 2
  288. [ 2.558395] usb20_host usb20_host: irq 49, io mem 0x00000000
  289. [ 2.558469] DWC_OTG: Init: Port Power? op_state=1
  290. [ 2.558504] DWC_OTG: Init: Power Port (0)
  291. [ 2.558571] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  292. [ 2.558620] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  293. [ 2.558666] usb usb2: Product: DWC OTG Controller
  294. [ 2.558698] usb usb2: Manufacturer: Linux 3.0.36+ host20_hcd
  295. [ 2.558736] usb usb2: SerialNumber: usb20_host
  296. [ 2.559122] hub 2-0:1.0: USB hub found
  297. [ 2.559158] hub 2-0:1.0: 1 port detected
  298. [ 2.559684] DWC_OTG: Mode Mismatch Interrupt: currently in Host mode
  299. [ 2.560829] android_usb gadget: Mass Storage Function, version: 2009/09/11
  300. [ 2.560879] android_usb gadget: Number of LUNs=2
  301. [ 2.560915] lun0: LUN: removable file: (no medium)
  302. [ 2.560949] lun1: LUN: removable file: (no medium)
  303. [ 2.561187] android_usb gadget: android_usb ready
  304. [ 2.561422] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0
  305. [ 2.562139] i2c /dev entries driver
  306. [ 2.562363] Linux video capture interface: v2.00
  307. [ 2.562420] def_ref_volt: 1800mV, curr_ref_volt: 1800mV
  308. [ 2.562457] RK29 Watchdog Timer, (c) 2011 Rockchip Electronics
  309. [ 2.562642] rk29-wdt rk29-wdt.0: starting watchdog timer
  310. [ 2.563082] device-mapper: uevent: version 1.0.3
  311. [ 2.563346] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  312. [ 2.563613] Bluetooth: HCI UART driver ver 2.2
  313. [ 2.563647] Bluetooth: HCI H4 protocol initialized
  314. [ 2.563680] Bluetooth: HCI BCSP protocol initialized
  315. [ 2.563716] Bluetooth: HCILL protocol initialized
  316. [ 2.563980] [imoseyon] interactiveX enter
  317. [ 2.564136] cpuidle: using governor ladder
  318. [ 2.564167] cpuidle: using governor menu
  319. [ 2.579597]
  320. [ 2.579602] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc0]
  321. [ 2.579636] .Line3910..The End of SDMMC-probe Ver.5.03 The last modify date is 2013-02-21. [sd_mmc]
  322. [ 2.579724]
  323. [ 2.579729] =================
  324. [ 2.579734] mmc_rescan..1831.. ====find no SDMMC host. [mmc0]
  325. [ 2.579809]
  326. [ 2.579814] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc1]
  327. [ 2.579842] .Line3910..The End of SDMMC-probe Ver.5.03 The last modify date is 2013-02-21. [sdio]
  328. [ 2.581470] usbcore: registered new interface driver usbhid
  329. [ 2.581511] usbhid: USB HID core driver
  330. [ 2.581878] logger: created 256K log 'log_main'
  331. [ 2.581987] logger: created 256K log 'log_events'
  332. [ 2.582092] logger: created 256K log 'log_radio'
  333. [ 2.582194] logger: created 256K log 'log_system'
  334. [ 2.582323] ipp irq 47
  335. [ 2.585740] asoc: hdmi-audio-codec <-> rk29_i2s.1 mapping ok
  336. [ 2.586122] ALSA device list:
  337. [ 2.586148] #0: ROCKCHIP HDMI
  338. [ 2.586273] GACT probability NOT on
  339. [ 2.586305] Mirror/redirect action on
  340. [ 2.586332] u32 classifier
  341. [ 2.586352] Actions configured
  342. [ 2.586377] Netfilter messages via NETLINK v0.30.
  343. [ 2.586456] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  344. [ 2.586939] ctnetlink v0.93: registering with nfnetlink.
  345. [ 2.587010] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  346. [ 2.587058] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  347. [ 2.587323] xt_time: kernel timezone is -0000
  348. [ 2.587510] ip_tables: (C) 2000-2006 Netfilter Core Team
  349. [ 2.587702] arp_tables: (C) 2002 David S. Miller
  350. [ 2.587783] TCP cubic registered
  351. [ 2.588234] NET: Registered protocol family 10
  352. [ 2.588987] Mobile IPv6
  353. [ 2.589033] ip6_tables: (C) 2000-2006 Netfilter Core Team
  354. [ 2.589221] IPv6 over IPv4 tunneling driver
  355. [ 2.590060] NET: Registered protocol family 17
  356. [ 2.590120] NET: Registered protocol family 15
  357. [ 2.590248] Bridge firewalling registered
  358. [ 2.590422] Bluetooth: RFCOMM TTY layer initialized
  359. [ 2.590483] Bluetooth: RFCOMM socket layer initialized
  360. [ 2.590519] Bluetooth: RFCOMM ver 1.11
  361. [ 2.590547] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  362. [ 2.590585] Bluetooth: BNEP filters: protocol multicast
  363. [ 2.590622] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  364. [ 2.590768] NET: Registered protocol family 35
  365. [ 2.591037] lib80211: common routines for IEEE802.11 drivers
  366. [ 2.591096] Registering the dns_resolver key type
  367. [ 2.591146] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  368. [ 2.591228] Registering SWP/SWPB emulation handler
  369. [ 2.591448] usb detect inited by board_usb_detect_init, disable detect by bvalid irq
  370. [ 2.591796] ddrfreq: change freq to 300 MHz when normal
  371. [ 2.591842] ddrfreq: verion 2.2
  372. [ 2.591868] ddrfreq: normal 300MHz video 300MHz idle 0MHz suspend 0MHz reboot 300MHz
  373. [ 2.592288] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  374. [ 2.592337] i2c_check_rk610_ex: adap(0) is not exist
  375. [ 2.592669] usbcore: registered new interface driver snd-usb-audio
  376. [ 2.592969] Freeing init memory: 1056K
  377. [ 2.626430] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  378. [ 3.050828] keychord: using input dev rk29-keypad for fevent
  379. [ 3.051059] init: cannot open '/initlogo.rle'
  380. [ 3.453424] gp_rknand_info = : 0xefa85500
  381. [ 3.453859] request IRQ_NANDC irq , ret=0.........
  382. [ 3.453965] FTL INFO:Version = 438,Date = 20130516
  383. [ 3.454152] FlashCopyProgBuf1=0xc1462000
  384. [ 3.454237] ATime: 40 ns AHB: 148 timming: 1081
  385. [ 3.454309] No.1 FLASH INFO:2c 64 44 4b a9
  386. [ 3.454373] No.2 FLASH INFO:ff ff ff ff ff
  387. [ 3.454434] No.3 FLASH INFO:ff ff ff ff ff
  388. [ 3.454497] No.4 FLASH INFO:ff ff ff ff ff
  389. [ 3.454921] ATime: 32 ns AHB: 148 timming: 1061
  390. [ 3.455157] ATime: 32 ns AHB: 148 timming: 1061
  391. [ 3.455221] randomizer = 2 , EccBits = 28 pSpec->pReadRetrial = bf00b68c
  392. [ 3.469967] GetRemapTbl...done
  393. [ 5.442917] totalLogicBlkRaw = 1906
  394. [ 5.442950] gBootMedia = 1 gSdmmcFwPartOffset =0!
  395. [ 5.442980] rknand_buffer.c version: 4.38 20121130!
  396. [ 5.443193] 10 cmdlinepart partitions found on MTD device rk29xxnand
  397. [ 5.443236] Creating 10 MTD partitions on "rk29xxnand":
  398. [ 5.443276] 0x000000400000-0x000000800000 : "misc"
  399. [ 5.444514] 0x000000800000-0x000001400000 : "kernel"
  400. [ 5.445508] 0x000001400000-0x000002400000 : "boot"
  401. [ 5.446508] 0x000002400000-0x000004400000 : "recovery"
  402. [ 5.447467] 0x000004400000-0x000008400000 : "backup"
  403. [ 5.448507] 0x000008400000-0x000010400000 : "cache"
  404. [ 5.449623] 0x000010400000-0x000090400000 : "userdata"
  405. [ 5.452332] 0x000090400000-0x000090800000 : "kpanic"
  406. [ 5.454129] apanic: Bound to mtd partition 'kpanic'
  407. [ 5.454164] apanic: No panic data available
  408. [ 5.454352] 0x000090800000-0x0000b0800000 : "system"
  409. [ 5.455781] 0x0000b0800000-0x0001dc800000 : "user"
  410. [ 5.460535] startBlk = 43 sysProtAddr = 42
  411. [ 5.531959] EXT4-fs (mtdblock8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  412. [ 5.560051] EXT4-fs (mtdblock6): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  413. [ 5.585693] EXT4-fs (mtdblock5): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  414. [ 5.600827] UMP: Using OS memory backend, allocation limit: 1073741824
  415. [ 5.600885] UMP: UMP device driver loaded
  416. [ 5.613706] mali: Unknown symbol sync_timeline_create (err 0)
  417. [ 5.613770] mali: Unknown symbol sync_fence_create (err 0)
  418. [ 5.613813] mali: Unknown symbol sync_fence_put (err 0)
  419. [ 5.613886] mali: Unknown symbol sync_pt_create (err 0)
  420. [ 5.613930] mali: Unknown symbol sync_fence_cancel_async (err 0)
  421. [ 5.613993] mali: Unknown symbol sync_timeline_destroy (err 0)
  422. [ 5.614058] mali: Unknown symbol sync_pt_free (err 0)
  423. [ 5.614113] mali: Unknown symbol sync_fence_install (err 0)
  424. [ 5.614151] mali: Unknown symbol sync_timeline_signal (err 0)
  425. [ 5.614216] mali: Unknown symbol sync_fence_fdget (err 0)
  426. [ 5.614265] mali: Unknown symbol sync_fence_wait_async (err 0)
  427. [ 5.614303] mali: Unknown symbol sync_fence_wait (err 0)
  428. [ 5.620103] mirroring: Unknown symbol video_data_to_mirroring (err 0)
  429. [ 5.620181] mirroring: Unknown symbol audio_data_to_mirroring (err 0)
  430. [ 5.780792] init: cannot find '/system/vendor/bin/pvrsrvctl', disabling 'pvrsrvctl'
  431. [ 5.973878] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
  432. [ 5.975217] init: cannot find '/system/bin/drmservice', disabling 'drmservice'
  433. [ 6.011871] init: cannot find '/system/bin/akmd', disabling 'akmd'
  434. [ 6.017725] vpu: power on
  435. [ 6.017789] VPU_SERVICE: checking hw id 4831
  436. [ 6.018242] vpu_service: failed to claim resource 0
  437. [ 6.018528] vpu: power off...done
  438. [ 6.018574] VPU_SERVICE: init success
  439. [ 6.022551] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
  440. [ 6.022624] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
  441. [ 6.023095] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
  442. [ 6.206239] android_usb: already disabled
  443. [ 6.206794] android_usb: already disabled
  444. [ 6.207244] mtp_bind_config
  445. [ 6.213785] HDMI: hdmi_submit_work event 0100 delay 0
  446. [ 6.213951] HDMI:
  447. [ 6.213962] hdmi_work_queue() - evt= 1 0
  448. [ 6.214041] HDMI: hdmi_work_queue() - exit
  449. [ 6.214062]
  450. shell@android:/ $ [ 6.311207] .416.. MMC0 receive the message sd-No-Media from VOLD.[sd_mmc]
  451. [ 6.311703] .447.. MMC0 receive the message No-Media from VOLD. waitTimes=0 [sd_mmc]
  452. [ 6.334781] init: no such service 'ril-daemon3'
  453. [ 6.698934] rk fb use 3 buffers
  454. [ 7.348925] init: untracked pid 101 exited
  455. [ 10.442059] rk fb use 3 buffers
  456. [ 10.599498] DWC_OTG: dwc_otg_hcd_enable, disable host controller
  457. [ 10.709825] init: untracked pid 274 exited
  458. [ 13.056813] warning: `zygote' uses 32-bit capabilities (legacy support in use)
  459. [ 13.070756] alarm_set_rtc: no RTC, time will be lost on reboot
  460. [ 15.833077] rk fb use 3 buffers
  461. [ 16.117119] init: untracked pid 355 exited
  462. [ 16.140307] init: untracked pid 351 exited
  463. [ 20.258506] rk fb use 3 buffers
  464. [ 20.677049] init: untracked pid 385 exited
  465. [ 20.710589] init: untracked pid 381 exited
  466. [ 25.817546] rk fb use 3 buffers
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!