Vadim Kaparov	walks up to the tool´s drawe of the garage.
Vadim Kaparov	walks up to the Mercedez.
Vadim Kaparov	reaches his other hand into the drawer, as he picks up a flathead screwdriver.
Vadim Kaparov	opens the drawer, as he reaches his hand into there, grabbing a ratchet, along with -
Vadim Kaparov	gets up to the trunk of the Mercedez.
Vadim Kaparov	throws the carpet, away from the car.
Vadim Kaparov	gets a grip of the trunk´s carpet, as he pulls it off.
Vadim Kaparov	places the screwdriver and the ratchet down onto the garage floor.
Vadim Kaparov	gets infront of the carlifts control panel, as he presses a button on it to raise the car.
Vadim Kaparov	walks up to the right, rear wheel of the Mercedez.
Vadim Kaparov	walks up to the countertop of the garage, as he opens one of the countertop drawer´s.
Vadim Kaparov	places the dool down, next to the car.
Vadim Kaparov	repeats with the 4 rest bolts.
Vadim Kaparov	turns the botl completly off, as he places it donw on the garage floor.
Vadim Kaparov	turns the tool unclockwise, using force, as he loosens the bolt.
Vadim Kaparov	fits the wheel cross tool onto one of the bolt´s.
Vadim Kaparov	repeats the process with the rest 3 wheels.
Vadim Kaparov	places the wheel down onto the garage floor, next to the car.
Vadim Kaparov	lifts the wheel off the hub.
Vadim Kaparov	reaches his both hands towards the wheel, as he gets a good grip off it.
Vadim Kaparov	gets infront of the right rear wheelarch, of the Mercedez.
Vadim Kaparov	walks up to the rear of the mercedez, as he picks up the ratchet off the ground, -
Vadim Kaparov	walks up to the tools drawer, as he reaches his hand into it, grabbing a 19 mm socket.
Vadim Kaparov	inspects the pinchbolt of the strut, it would be 19 mm.
Vadim Kaparov	turns the ratchet unclockwise, using force, as he loosens up the bolt.
Vadim Kaparov	reaches his hand, holding the ratchet towards the pinchbolt, as he fits the ratchet on it.
Vadim Kaparov	gets back infront of the rear right wheelarch.
Vadim Kaparov	gets infront of the trunk.
Vadim Kaparov	pulls off the 19 mm socket, as he picks up the 14 mm socket, clicking it on, placing -
Vadim Kaparov	places the bolt down onto the garage floor.
Vadim Kaparov	turns the bolt completly off.
Vadim Kaparov	turns the bolt completly off, as he places it into the trunk.
Vadim Kaparov	turns the ratchet unclockwise, using force, as he loosens up the bolt.
Vadim Kaparov	leans himself into the trunk, as he fits the ratchet, onto one of the 3 nut´s holding the -
Vadim Kaparov	places the strut away from the car.
Vadim Kaparov	reaches his hands towards the strut, as he picks it up.
Vadim Kaparov	places his ratchet into the trunk as he gets infront of the strut.
Vadim Kaparov	repeats with the 2 rest nuts.
Vadim Kaparov	pulls the spring towards himself, pulling it out of its place.
Vadim Kaparov	reaches his both hand´s towards the spring, as he gets a good grip off it.
Vadim Kaparov	gets back infront of the right wheelarch.
Vadim Kaparov	reaches his both hand´s towrds the box, as he lifts it off the shelf.
Vadim Kaparov	walks up to the garage´s shelf.
Vadim Kaparov	opens up the box, as it would reveal a set of brand new coilovers .
Vadim Kaparov	brings the box up to the Mercedez, as he places it down next to it.
Vadim Kaparov	reaches his one hand into the box, as he takes out the new coilover.
Vadim Kaparov	fits the new spring into its slot, along with the upper rubber seat.
Vadim Kaparov	fits the rubber seat onto the spring.
Vadim Kaparov	takes out the brand new spring from the box, as he picks up the upper rubber seat -
Vadim Kaparov	holds 2 nuts in his palm, as he slides one between his fingers.
Vadim Kaparov	picks up the ratchet from the trunk, as he also picks up the 3 nuts from the trunk.
Vadim Kaparov	walks up to infront of the trunk.
Vadim Kaparov	carefully fits the coilover into its place, as he matches the upper mounts.
Vadim Kaparov	repeats with the rest 2 nuts.
Vadim Kaparov	fits the wrench onto one of the 3 nuts, as he turns it clockwise, until the nut would be -
Vadim Kaparov	repeats with the 2 rest nuts.
Vadim Kaparov	turns one nut, onto one of the new coilover´s 3 top mounts.
Vadim Kaparov	brings the slab up to the rear right wheelarch.
Vadim Kaparov	walks up to the slab, as he picks it up.
Vadim Kaparov	places the ratchet down, next to the car´s right rear wheelarch.
Vadim Kaparov	presses a button on it, to lower the car.
Vadim Kaparov	gets infront of the carlift´s control panel.
Vadim Kaparov	places the slab on the floor, as he slides it under the wheelhub.
Vadim Kaparov	picks up the ratchet off the floor, as he pulls off the 14 mm socket, picking up the 19mm -
Vadim Kaparov	turns the pinchbolt, in by hand, as far as he can.
Vadim Kaparov	gets infront of the wheelarch, as he picks up the pinchbolt.
Vadim Kaparov	lowers the car until the slab would lift up the wheelhub, so the pinchbolt mount would match
Vadim Kaparov	fits the ratchet onto the pinchbolt, as he turns it clockwise until the bolt would be -
Vadim Kaparov	gets infront of the right wheelarch.
Vadim Kaparov	picks up all the tool´s off the ground, as he brings them up to the front of the car.
Vadim Kaparov	repeats the whole process with the left side.
Vadim Kaparov	repeats with the break line.
Vadim Kaparov	reaches his one hand toward´s the ABS line, as he unclips it from the strut, pulling it away
Vadim Kaparov	repeats with the 2 rest.
Vadim Kaparov	turns the bolt completly off, as he places it down on the garage floor.
Vadim Kaparov	turns the ratchet unclockwise, using force, as he loosens up the bolt.
Vadim Kaparov	picks up the ratceht off the ground, as he fits it onto one of the bolts.
Vadim Kaparov	turns the ratchet unclockwise, using force, loosening the bolt.
Vadim Kaparov	fits the ratchet onto one of the 3 top mount nut´s.
Vadim Kaparov	gets up, over the engine compartment.
Vadim Kaparov	clicks the 14 mm socket onto the ratchet.
Vadim Kaparov	pulls the 19 mm socket off the ratchet, as he drops it and picks up the 14 mm one.
Vadim Kaparov	places the ratchet down on the floor, as he reaches his both hands towards the strut.
Vadim Kaparov	repeats with the 2 rest nuts.
Vadim Kaparov	turns the bolt completly off, as he places it down on the garage´s floor.
Vadim Kaparov	gets back infront of the front right wheelarch.
Vadim Kaparov	gets up to the Coilover box, as he reaches his hand into the box, pulling out a brand new -
Vadim Kaparov	gets a good grip of it, as he rattles it out of its place, throwing it away from the car.
Vadim Kaparov	matches the coilover´s 3 top mounts, as he reaches his hand holding the nuts -
Vadim Kaparov	picks up the 3 nuts with his other hand, holding 2 in his palm, as he slides one nut -
Vadim Kaparov	carefully fits the new coilovers into its place, as he holds it up with one hand.
Vadim Kaparov	lets go off the coilover, as it would now hold on itself.
Vadim Kaparov	repeats with the 2 rest.
Vadim Kaparov	turns one nut onto one of the 3 mountings.
Vadim Kaparov	repeats with the 2 rest nuts.
Vadim Kaparov	fits the ratchet onto one of the 3 nuts, as he turns it clockwise, until the nut would be. -
Vadim Kaparov	picks up the ratchet off the ground, as he gets back over to the engine compartment.
Vadim Kaparov	turns the bolt into the wheelhub, as he fits the ratchet on it afterwards-
Vadim Kaparov	holds 2 bolts in his palm as he slides one inbetween his fingers.
Vadim Kaparov	clicks the socket onto the ratchet, as he picks up the 3 wheelhub bolts, off the ground.
Vadim Kaparov	pulls the 14 mm socket off the ratchet as, he drops it, picking up the 19 mm socket.
Vadim Kaparov	repeats with the break line.
Vadim Kaparov	reaches his hand towards the ABS line as he grabs it, clipping it onto the coilover.
Vadim Kaparov	repeats with the rest 2 bolts.
Vadim Kaparov	turns the ratchet clockwise until the bolt would be tight on.
Vadim Kaparov	reaches his both hands towards the wheel, as he picks it up.
Vadim Kaparov	walks up to one of the removed wheel´s off the Mercedez.
Vadim Kaparov	picks up the wheel cross tool, as he fits it onto one of the bolts.
Vadim Kaparov	picks up the 5 bolts off the ground, as he turns them into the wheel mounts one by one.
Vadim Kaparov	walks up to the front right wheelhub, as he lifts it onto the wheelhub.
Vadim Kaparov	repeats the wheel mounting process with the rest of the 3 wheels.
Vadim Kaparov	repeats the whole process with the left side coilover.
Vadim Kaparov	repeats with the 4 rest bolts.
Vadim Kaparov	turns the tool clockwise until the bolt would be tight on.