Guest User

is01 dmesg

a guest
Nov 28th, 2010
551
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 48.69 KB | None | 0 0
  1. <5>[ 0.000000] Linux version 2.6.29-perf (nbproj@TG721404) (gcc version 4.2.1) #1 PREEMPT Mon Oct 18 12:52:01 JST 2010
  2. <4>[ 0.000000] CPU: ARMv7 Processor [510f00f2] revision 2 (ARMv7), cr=10c5387f
  3. <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
  4. <4>[ 0.000000] Machine: SHARP DECKARD
  5. <6>[ 0.000000] Partition (from atag) boot -- Offset:389 Size:58
  6. <6>[ 0.000000] Partition (from atag) cache -- Offset:3e1 Size:28
  7. <6>[ 0.000000] Partition (from atag) recovery -- Offset:409 Size:58
  8. <6>[ 0.000000] Partition (from atag) splash -- Offset:461 Size:c
  9. <6>[ 0.000000] Partition (from atag) ipl -- Offset:46d Size:5a
  10. <6>[ 0.000000] Partition (from atag) system -- Offset:4c7 Size:800
  11. <6>[ 0.000000] Partition (from atag) log -- Offset:cc7 Size:18
  12. <6>[ 0.000000] Partition (from atag) userdata -- Offset:cdf Size:321
  13. <4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
  14. <7>[ 0.000000] On node 0 totalpages: 59392
  15. <7>[ 0.000000] free_area_init_node: node 0, pgdat 80522b80, node_mem_map 80661000
  16. <7>[ 0.000000] Normal zone: 464 pages used for memmap
  17. <7>[ 0.000000] Normal zone: 0 pages reserved
  18. <7>[ 0.000000] Normal zone: 58928 pages, LIFO batch:15
  19. <6>[ 0.000000] allocating 34033664 bytes at 80836000 (20836000 physical) for mdp pmem arena
  20. <6>[ 0.000000] allocating 29360128 bytes at 8404a000 (2404a000 physical) for adsp pmem arena
  21. <6>[ 0.000000] allocating 8388608 bytes at 85d00000 (25d00000 physical) for gpu1 pmem arena
  22. <6>[ 0.000000] using 1843200 bytes of SMI at 2b00000 physical for fb
  23. <6>[ 0.000000] allocating 524288 bytes at 85c4a000 (25c4a000 physical) for audio
  24. <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 58928
  25. <5>[ 0.000000] Kernel command line: console=ttyMSM2,115200n8 androidboot.hardware=qcom androidboot.serialno=SSHDO013251 androidboot.wakeinfo=4 androidboot.pmicinfo=h
  26. <3>[ 0.000000] Unknown boot option `androidboot.hardware=qcom': ignoring
  27. <3>[ 0.000000] Unknown boot option `androidboot.wakeinfo=4': ignoring
  28. <3>[ 0.000000] Unknown boot option `androidboot.pmicinfo=h': ignoring
  29. <4>[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
  30. <4>[ 0.000000] Console: colour dummy device 80x30
  31. <6>[ 0.000213] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  32. <6>[ 0.000533] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  33. <6>[ 0.008940] Memory: 232MB = 232MB total
  34. <5>[ 0.008966] Memory: 157824KB available (4828K code, 1499K data, 160K init)
  35. <6>[ 0.009280] Calibrating delay loop... 511.18 BogoMIPS (lpj=2555904)
  36. <6>[ 0.240166] Security Framework initialized
  37. <6>[ 0.240193] DECKARD LSM module initialized
  38. <4>[ 0.240320] Mount-cache hash table entries: 512
  39. <6>[ 0.240800] CPU: Testing write buffer coherency: ok
  40. <6>[ 0.242966] net_namespace: 444 bytes
  41. <6>[ 0.243693] NET: Registered protocol family 16
  42. <6>[ 0.245566] socinfo_init: v2, id=30, ver=2.0, raw_id=640, raw_ver=2
  43. <3>[ 0.245586] qsd8x50_cfg_smc91x: invalid machine type
  44. <6>[ 0.245613] Max ACPU freq from efuse data is 998400 KHz
  45. <6>[ 0.246180] ACPU running at 768000 KHz
  46. <6>[ 0.246193] 5 scaling frequencies supported.
  47. <4>[ 0.268553] bio: create slab <bio-0> at 0
  48. <5>[ 0.271593] SCSI subsystem initialized
  49. <6>[ 0.271946] msm_i2c_probe
  50. <6>[ 0.271986] msm_i2c_probe: clk_ctl 317, 369230 Hz
  51. <6>[ 0.274506] Bluetooth: Core ver 2.15
  52. <6>[ 0.274793] NET: Registered protocol family 31
  53. <6>[ 0.274806] Bluetooth: HCI device and connection manager initialized
  54. <6>[ 0.274826] Bluetooth: HCI socket layer initialized
  55. <6>[ 0.276746] NET: Registered protocol family 2
  56. <6>[ 0.276926] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  57. <6>[ 0.277273] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  58. <6>[ 0.277446] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  59. <6>[ 0.277526] TCP: Hash tables configured (established 8192 bind 8192)
  60. <6>[ 0.277540] TCP reno registered
  61. <6>[ 0.277720] NET: Registered protocol family 1
  62. <6>[ 0.278133] checking if image is initramfs... it is
  63. <7>[ 0.280073] Switched to high resolution mode on CPU 0
  64. <6>[ 0.280426] Freeing initrd memory: 292K
  65. <4>[ 0.282786] sh_sys_manager_probe: hw_revision 0003
  66. <4>[ 0.282806] sh_sys_manager_probe: model_type 0003
  67. <4>[ 0.283000] smd_shdiag loaded.
  68. <6>[ 0.283733] smd probe
  69. <6>[ 0.283746] smd_core_init()
  70. <6>[ 0.283806] smd_core_init() done
  71. <6>[ 0.283993] smd_alloc_channel: cid 0 fifo found; size = 8192
  72. <6>[ 0.284013] smd_alloc_channel() 'DS' cid=0
  73. <6>[ 0.284666] smd_alloc_channel: cid 1 fifo found; size = 8192
  74. <6>[ 0.284680] smd_alloc_channel() 'DIAG' cid=1
  75. <6>[ 0.285020] smd_alloc_channel: cid 2 fifo found; size = 8192
  76. <6>[ 0.285040] smd_alloc_channel() 'RPCCALL' cid=2
  77. <6>[ 0.285373] smd_alloc_channel: cid 7 fifo found; size = 32768
  78. <6>[ 0.285386] smd_alloc_channel() 'DATA1' cid=7
  79. <6>[ 0.285746] smd_alloc_channel: cid 8 fifo found; size = 8192
  80. <6>[ 0.285760] smd_alloc_channel() 'DATA2' cid=8
  81. <6>[ 0.286113] smd_alloc_channel: cid 9 fifo found; size = 8192
  82. <6>[ 0.286126] smd_alloc_channel() 'DATA3' cid=9
  83. <6>[ 0.286480] smd_alloc_channel: cid 10 fifo found; size = 8192
  84. <6>[ 0.286493] smd_alloc_channel() 'DATA4' cid=10
  85. <6>[ 0.286840] smd_alloc_channel: cid 11 fifo found; size = 32768
  86. <6>[ 0.286853] smd_alloc_channel() 'DATA5' cid=11
  87. <6>[ 0.287340] smd_alloc_channel: cid 12 fifo found; size = 32768
  88. <6>[ 0.287360] smd_alloc_channel() 'DATA6' cid=12
  89. <6>[ 0.287740] smd_alloc_channel: cid 13 fifo found; size = 32768
  90. <6>[ 0.287753] smd_alloc_channel() 'DATA7' cid=13
  91. <6>[ 0.288146] smd_alloc_channel: cid 40 fifo found; size = 8192
  92. <6>[ 0.288166] smd_alloc_channel() 'DIAG' cid=40
  93. <3>[ 0.288506] smd_alloc_channel: cid 41 does not exist
  94. <6>[ 0.288526] smd_alloc_channel: cid 42 fifo found; size = 8192
  95. <6>[ 0.288540] smd_alloc_channel() 'DAL_AQ_VID' cid=42
  96. <6>[ 0.289013] smd_alloc_channel: cid 43 fifo found; size = 8192
  97. <6>[ 0.289033] smd_alloc_channel() 'DAL_AQ_AUD' cid=43
  98. <6>[ 0.289393] smd_alloc_channel: cid 46 fifo found; size = 8192
  99. <6>[ 0.289406] smd_alloc_channel() 'DAL00' cid=46
  100. <3>[ 0.289733] smd_alloc_channel: cid 47 does not exist
  101. <6>[ 0.289753] smd_alloc_channel: cid 48 fifo found; size = 8192
  102. <6>[ 0.289766] smd_alloc_channel() 'DAL_AM_AUD' cid=48
  103. <6>[ 0.290193] smd_alloc_channel: cid 49 fifo found; size = 8192
  104. <6>[ 0.290206] smd_alloc_channel() 'DAL00' cid=49
  105. <6>[ 0.290560] smd_alloc_channel: cid 50 fifo found; size = 8192
  106. <6>[ 0.290580] smd_alloc_channel() 'DATA5_CNTL' cid=50
  107. <6>[ 0.290793] SMD Control Port Driver Initialized.
  108. <6>[ 0.290926] smd_alloc_channel: cid 51 fifo found; size = 8192
  109. <6>[ 0.290946] smd_alloc_channel() 'DATA6_CNTL' cid=51
  110. <6>[ 0.291286] smd_alloc_channel: cid 52 fifo found; size = 8192
  111. <6>[ 0.291300] smd_alloc_channel() 'DATA7_CNTL' cid=52
  112. <6>[ 0.292086] SMD: ch 2 CLOSED -> OPENING
  113. <6>[ 0.292226] SMD: ch 2 OPENING -> OPENED
  114. <3>[ 0.292793] Using very old AMSS modem firmware.
  115. <3>[ 0.292813] Using very old AMSS modem firmware.
  116. <6>[ 0.293053] SMD: ch 48 CLOSED -> OPENING
  117. <6>[ 0.293206] SMD: ch 48 OPENING -> OPENED
  118. <6>[ 0.304506] SMD: ch 43 CLOSED -> OPENING
  119. <6>[ 0.304560] SMD: ch 43 OPENING -> OPENED
  120. <6>[ 0.312726] RPC_TIME_TOD_SET_APPS_BASES:
  121. <6>[ 0.312733] tick = 150185
  122. <6>[ 0.312740] stamp = 2976688852
  123. <4>[ 0.312760] /nbproj/NB30/NB30_SA180/LINUX/android/kernel/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  124. <6>[ 0.341453] sh_sleepcheck_init() : Called.
  125. <6>[ 0.342013] sh_sleepcheck_probe() : Called.
  126. <6>[ 0.346900] ashmem: initialized
  127. <6>[ 0.349046] fuse init (API version 7.11)
  128. <4>[ 0.349520] yaffs Oct 18 2010 12:50:30 Installing.
  129. <6>[ 0.349566] msgmni has been set to 309
  130. <6>[ 0.351933] alg: No test for stdrng (krng)
  131. <6>[ 0.351993] io scheduler noop registered
  132. <6>[ 0.352006] io scheduler anticipatory registered (default)
  133. <6>[ 0.352386] msm_fb_probe: phy_Addr = 0x2b00000 virt = 0x8f200000
  134. <6>[ 0.352986] MDP HW Base phy_Address = 0xaa200000 virt = 0x8f400000
  135. <6>[ 0.353586] primary mddi base phy_addr = 0xaa600000 virt = 0x8f06a000
  136. <4>[ 0.530133] Console: switching to colour frame buffer device 60x60
  137. <6>[ 0.575620] FrameBuffer[0] 480x960 size=1843200 bytes is registered successfully!
  138. <4>[ 0.575666] load_565rle_image: Can not open /logo.rle
  139. <6>[ 0.576106] Registered led device: lcd-backlight
  140. <6>[ 0.591040] diagfwd initializing ..
  141. <6>[ 0.591286] SMD: ch 1 CLOSED -> OPENING
  142. <6>[ 0.591300] diag opened SMD port ; r = 0
  143. <6>[ 0.591346] SMD: ch 40 CLOSED -> OPENING
  144. <6>[ 0.591353] diag opened SMD port ; r = 0
  145. <6>[ 0.591406] SMD: ch 1 OPENING -> OPENED
  146. <6>[ 0.591486] SMD: ch 40 OPENING -> OPENED
  147. <6>[ 0.591673] diagchar initializing ..
  148. <6>[ 0.592086] diagchar initialized
  149. <6>[ 0.592946] [drm] Initialized drm 1.1.0 20060810
  150. <6>[ 0.593033] msm_serial: detected port #2
  151. <6>[ 0.593126] msm_serial.2: ttyMSM2 at MMIO 0xa9c00000 (irq = 231) is a MSM
  152. <6>[ 0.593753] msm_serial: driver initialized
  153. <6>[ 0.593906] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 44) is a MSM HS UART
  154. <6>[ 0.594513] msm_serial_hs module loaded
  155. <6>[ 0.597813] brd: module loaded
  156. <6>[ 0.602080] loop: module loaded
  157. <1>[ 0.602166] pmem: pmem_setup: unable to register pmem driver(pmem_kernel_ebi1) - zero size passed in!
  158. <4>[ 0.602200] android_pmem: probe of android_pmem.5 failed with error -1
  159. <6>[ 0.602266] pmem: 1 init
  160. <6>[ 0.603246] pmem_adsp: 0 init
  161. <6>[ 0.604140] pmem_gpu0: 0 init
  162. <6>[ 0.604826] pmem_gpu1: 0 init
  163. <6>[ 0.605613] msm_tsif msm_tsif.0: remapped phys 0xa0100000 => virt 8f078000
  164. <6>[ 0.605933] msm_tsif msm_tsif.0: Configured irq 43 memory 0xa0100000 DMA 10 CRCI 10
  165. <6>[ 0.606306] tsif_init_one[0]
  166. <6>[ 0.606613] tsif tsif0: Device 245.0 attached to TSIF, buffer size 0
  167. <6>[ 0.606660] TPS65023: PMIC probed.
  168. <6>[ 0.606820] PPP generic driver version 2.4.2
  169. <6>[ 0.607580] PPP MPPE Compression module registered
  170. <6>[ 0.607593] NET: Registered protocol family 24
  171. <6>[ 0.607613] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  172. <6>[ 0.607633] CSLIP: code copyright 1989 Regents of the University of California.
  173. <4>[ 0.608233] smc91x: not found (-16).
  174. <4>[ 0.608253] smc91x: probe of smc91x.0 failed with error -16
  175. <6>[ 0.608740] rmnet0 (): not using net_device_ops yet
  176. <6>[ 0.609193] rmnet1 (): not using net_device_ops yet
  177. <6>[ 0.609640] rmnet2 (): not using net_device_ops yet
  178. <6>[ 0.610106] Linux video capture interface: v2.00
  179. <4>[ 0.613273] Driver 'sd' needs updating - please use bus_type methods
  180. <6>[ 0.613586] SCSI Media Changer driver v0.25
  181. <4>[ 0.613726] Driver 'ch' needs updating - please use bus_type methods
  182. <6>[ 0.614200] msm_nand: phys addr 0xa0a00000 dmac 0x7
  183. <6>[ 0.614226] allocated dma buffer at ffa05000, dma_addr 2e411000
  184. <6>[ 0.614393] ONFI probe : Found a nonONFI Compliant device
  185. <6>[ 0.614453] status: e00020
  186. <6>[ 0.614466] nandid: 5590bc98 maker 98 device bc
  187. <6>[ 0.614480] Found a supported NAND device
  188. <6>[ 0.614493] NAND Id : 0x5500bc98
  189. <6>[ 0.614500] Buswidth : 16 Bits
  190. <6>[ 0.614506] Density : 512 MByte
  191. <6>[ 0.614520] Pagesize : 2048 Bytes
  192. <6>[ 0.614526] Erasesize: 131072 Bytes
  193. <6>[ 0.614533] Oobsize : 64 Bytes
  194. <6>[ 0.614546] CFG0 Init : 0xa85408c0
  195. <6>[ 0.614553] CFG1 Init : 0x000c7442
  196. <6>[ 0.614566] ECCBUFCFG : 0x00000203
  197. <5>[ 0.614586] Creating 8 MTD partitions on "msm_nand":
  198. <5>[ 0.614600] 0x000007120000-0x000007c20000 : "boot"
  199. <5>[ 0.622206] 0x000007c20000-0x000008120000 : "cache"
  200. <5>[ 0.625980] 0x000008120000-0x000008c20000 : "recovery"
  201. <5>[ 0.633300] 0x000008c20000-0x000008da0000 : "splash"
  202. <5>[ 0.635053] 0x000008da0000-0x0000098e0000 : "ipl"
  203. <5>[ 0.643013] 0x0000098e0000-0x0000198e0000 : "system"
  204. <5>[ 0.798480] 0x0000198e0000-0x000019be0000 : "log"
  205. <5>[ 0.801120] 0x000019be0000-0x000020000000 : "userdata"
  206. <5>[ 0.861866] UBI: attaching mtd4 to ubi0
  207. <5>[ 0.861886] UBI: physical eraseblock size: 131072 bytes (128 KiB)
  208. <5>[ 0.861900] UBI: logical eraseblock size: 126976 bytes
  209. <5>[ 0.861913] UBI: smallest flash I/O unit: 2048
  210. <5>[ 0.861926] UBI: VID header offset: 2048 (aligned 2048)
  211. <5>[ 0.861940] UBI: data offset: 4096
  212. <3>[ 0.869820] msm_nand_read_oob 8fa0800 800 0 failed -74, corrected 0
  213. <3>[ 0.869846] UBI error: ubi_io_read: error -74 while reading 2048 bytes from PEB 16:2048, read 2048 bytes
  214. <3>[ 0.869866] UBI error: compare_lebs: unsupported on-flash UBI format
  215. <3>[ 0.869873]
  216. <3>[ 0.869933] UBI error: ubi_init: cannot attach mtd4
  217. <3>[ 0.870473] UBI error: ubi_init: UBI error: cannot initialize UBI, error -22
  218. <6>[ 0.870513] msm_hsusb_rpc_connect: rpc connect success vers = 10001
  219. <6>[ 0.870553] msm_chg_rpc_connect: connected to rpc vers = 10001
  220. <6>[ 0.871546] msm_hsusb_get_boot_mode: mode: (0)
  221. <6>[ 0.885166] msm_hsusb_get_chgen: enable: (16777216)
  222. <6>[ 0.898526] msm_hsusb_get_qxdmen: enable: (16777216)
  223. <6>[ 0.898546] usb_set_composition: composition set to product id = 9337
  224. <6>[ 0.898560] phy info:(513)
  225. <6>[ 0.898986] usb_probe() io=8f0c0000, irq=58, dma=ffa06000(2e2ae000)
  226. <6>[ 0.899213] Created the sysfs entry successfully
  227. <6>[ 0.899253] Created the functions sysfs entry successfully
  228. <6>[ 0.900493] usb_function_register: name = 'adb', map = 5
  229. <6>[ 0.900580] usb_function_register: name = 'diag', map = 6
  230. <6>[ 0.901160] usb_function_register: name = 'modem', map = 2
  231. <3>[ 0.901180] usb_function_register: unsupported function = ethernet
  232. <6>[ 0.901193] cdcecm init:usb function register failed
  233. <6>[ 0.901793] usb_function_register: name = 'mdlm', map = 1
  234. <6>[ 0.902506] usb_function_register: name = 'obex', map = 0
  235. <6>[ 0.903040] usb_function_register: name = 'mtp', map = 4
  236. <6>[ 0.903793] usb_function_register: name = 'mass_storage', map = 3
  237. <6>[ 0.903813] usb_set_composition: composition set to product id = 9337
  238. <3>[ 0.904580] msm_hsusb_is_serial_num_null: rpc call success
  239. <3>[ 0.905346] msm_hsusb_send_serial_number: rpc call failed! error: -22
  240. <3>[ 0.906580] msm_hsusb_send_productID: rpc call success
  241. <6>[ 0.906593] msm_hsusb: functions bound. starting.
  242. <6>[ 0.906606] usb_bind_func() (mass_storage)
  243. <6>[ 0.906860] usb_bind_func() (adb)
  244. <6>[ 0.906893] usb_bind_func() (diag)
  245. <6>[ 0.908133] msm_hsusb_enable_ldo_off
  246. <6>[ 0.908320] usb_start: pm_app_rpc connect success
  247. <6>[ 0.909273] usb_start:PMIC VBUS SN notif supported
  248. <7>[ 0.909846] [ShKey]Init(PID:1)
  249. <7>[ 0.909893] [ShKey]Probe(PID:1)
  250. <6>[ 0.910173] SH_qwerty_key 0-0044: Detected SH_qwerty_key, attempting to initialize keyboard
  251. <6>[ 0.910500] msm_hsusb_enable_ldo_off
  252. <6>[ 0.911473] input: msm_touchscreen as /devices/platform/msm_touchscreen.0/input/input0
  253. <6>[ 0.912126] SH_touchpanel 0-0015: Detected SH_touchpanel, attempting to initialize
  254. <3>[ 0.913080] gpiomatrix: gpio_request failed for output 41
  255. <3>[ 0.913093] gpio_event_probe: function failed
  256. <4>[ 0.913120] gpio-event: probe of gpio-event failed with error -16
  257. <7>[ 0.913860] RTC Registering with rs30000048:00010000
  258. <7>[ 0.914900] msm_rtc: dev (254:0)
  259. <6>[ 0.914946] rs30000048:00010000 rs30000048:00010000: rtc core: registered msm_rtc as rtc0
  260. <7>[ 0.915300] msm_rtc_secure: dev (254:1)
  261. <6>[ 0.915313] rs30000048:00010000 rs30000048:00010000: rtc core: registered msm_rtc_secure as rtc1
  262. <6>[ 0.915466] i2c /dev entries driver
  263. <6>[ 0.938820] input: compass as /devices/virtual/input/input1
  264. <3>[ 0.941166] msm_batt_init_rpc: rpc connect failed for CHG_RPC_PROG. rc = -113
  265. <3>[ 0.941186] msm_batt_init: msm_batt_init_rpc Failed rc=-113
  266. <6>[ 0.941200] msm_batt_send_event() : Cleanup event ocurred.events = 00000004
  267. <6>[ 0.941220] msm_batt_send_event(): Battery call Back thread not Started.<6>Bluetooth: HCI UART driver ver 2.2
  268. <6>[ 0.941266] Bluetooth: HCI H4 protocol initialized
  269. <3>[ 0.942240] mmc0: No card detect facilities available
  270. <6>[ 0.942613] mmc0: Qualcomm MSM SDCC at 0x00000000a0400000 irq 26,0 dma 8
  271. <6>[ 0.942626] mmc0: 8 bit data mode disabled
  272. <6>[ 0.942640] mmc0: 4 bit data mode enabled
  273. <6>[ 0.942646] mmc0: polling status mode disabled
  274. <6>[ 0.942666] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 64000000 Hz
  275. <6>[ 0.942680] mmc0: Slot eject status = 0
  276. <6>[ 0.942686] mmc0: Power save feature enable = 1
  277. <6>[ 0.942700] mmc0: DM non-cached buffer at ffa09000, dma_addr 0x2e429000
  278. <6>[ 0.942720] mmc0: DM cmd busaddr 0x2e429000, cmdptr busaddr 0x2e429300
  279. <3>[ 0.943140] mmc1: No card detect facilities available
  280. <6>[ 0.943180] msmsdcc_platform_sdiowakeup_irq: SDIO Wake up IRQ : 117
  281. <6>[ 0.943346] mmc0 mmc_rescan detect a newly inserted card
  282. <6>[ 0.943886] mmc1: Qualcomm MSM SDCC at 0x00000000a0300000 irq 24,0 dma 8
  283. <6>[ 0.943900] mmc1: 8 bit data mode disabled
  284. <6>[ 0.943913] mmc1: 4 bit data mode enabled
  285. <6>[ 0.943920] mmc1: polling status mode disabled
  286. <6>[ 0.943933] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 64000000 Hz
  287. <6>[ 0.943946] mmc1: Slot eject status = 0
  288. <6>[ 0.943960] mmc1: Power save feature enable = 1
  289. <6>[ 0.943973] mmc1: DM non-cached buffer at ffa0a000, dma_addr 0x2e42c000
  290. <6>[ 0.943986] mmc1: DM cmd busaddr 0x2e42c000, cmdptr busaddr 0x2e42c300
  291. <6>[ 0.944653] Registered led device: keyboard-backlight
  292. <6>[ 0.947120] logger: created 64K log 'log_main'
  293. <6>[ 0.947440] logger: created 256K log 'log_events'
  294. <6>[ 0.947746] logger: created 64K log 'log_radio'
  295. <3>[ 0.951760] [bwpm] Bluetooth/Wifi Power Management
  296. <6>[ 0.984233] mmc0 mmc_rescan search SDIO card
  297. <3>[ 0.985066] mmc0: Command timeout(CMD = 5, ARG = 0x00000000)
  298. <3>[ 0.990886] mmc0: Command timeout(CMD = 5, ARG = 0x00000000)
  299. <3>[ 0.995960] [bwpm] bwpm_bluetooth_on: RF ON
  300. <3>[ 0.996673] [bwpm] bwpm_bluetooth_on: Normal-Power-mode
  301. <3>[ 0.996686] [bwpm] bwpm_bluetooth_on: change status (0->1)
  302. <3>[ 0.996700] mmc0: Command timeout(CMD = 5, ARG = 0x00000000)
  303. <3>[ 1.002533] mmc0: Command timeout(CMD = 5, ARG = 0x00000000)
  304. <6>[ 1.007586] mmc0 mmc_rescan search SD card
  305. <4>[ 1.013106] success shfsinit_init.
  306. <6>[ 1.015546] stheno is loaded
  307. <6>[ 1.015560] major = 254
  308. <6>[ 1.015786] Advanced Linux Sound Architecture Driver Version 1.0.18a.
  309. <4>[ 1.016500] No device for DAI CODEC_DAI
  310. <4>[ 1.016506] No device for DAI CPU_DAI
  311. <3>[ 1.016873] msm_soc: create pcms
  312. <6>[ 1.016986] asoc: CODEC_DAI <-> CPU_DAI mapping ok
  313. <6>[ 1.018180] ALSA device list:
  314. <6>[ 1.018193] #0: qsd-audio (MSM-CARD)
  315. <4>[ 1.018206] Netfilter messages via NETLINK v0.30.
  316. <6>[ 1.018353] ip_tables: (C) 2000-2006 Netfilter Core Team
  317. <6>[ 1.018393] TCP cubic registered
  318. <6>[ 1.018406] NET: Registered protocol family 17
  319. <6>[ 1.018440] Bluetooth: L2CAP ver 2.13
  320. <6>[ 1.018446] Bluetooth: L2CAP socket layer initialized
  321. <6>[ 1.018466] Bluetooth: SCO (Voice Link) ver 0.6
  322. <6>[ 1.018480] Bluetooth: SCO socket layer initialized
  323. <6>[ 1.018593] Bluetooth: RFCOMM socket layer initialized
  324. <6>[ 1.018626] Bluetooth: RFCOMM TTY layer initialized
  325. <6>[ 1.018640] Bluetooth: RFCOMM ver 1.11
  326. <6>[ 1.018653] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  327. <6>[ 1.018660] Bluetooth: BNEP filters: protocol multicast
  328. <6>[ 1.018680] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  329. <6>[ 1.019340] RPC: Registered udp transport module.
  330. <6>[ 1.019353] RPC: Registered tcp transport module.
  331. <6>[ 1.020093] clock_late_init() disabled 20 unused clocks
  332. <6>[ 1.021660] input: SH_pm_key as /devices/virtual/input/input2
  333. <6>[ 1.022626] input: SH_headset_key as /devices/virtual/input/input3
  334. <6>[ 1.023780] input: 8k_handset as /devices/virtual/input/input4
  335. <6>[ 1.030400] smsm_entry 7, new intr_mask 0
  336. <6>[ 1.030420] smsm_entry 6, new intr_mask 0
  337. <6>[ 1.030546] VFP support v0.3: implementor 51 architecture 0 part 0f variant 0 rev 1
  338. <6>[ 1.036340] [drm] Initialized kgsl 2.0.0 20090810 on minor 0
  339. <6>[ 1.036833] msm_v4l2: msm_v4l2_init
  340. <6>[ 1.038240] rs30000048:00010000 rs30000048:00010000: setting system clock to 2010-11-28 14:18:13 UTC (1290953893)
  341. <6>[ 1.038306] Freeing init memory: 160K
  342. <4>[ 1.038353] Warning: unable to open an initial console.
  343. <6>[ 1.039526] init: reading config file
  344. <3>[ 1.040660] init: /init.rc: 345: invalid option 'busybox'
  345. <6>[ 1.041186] init: device init
  346. <4>[ 1.108953] mmc0: host does not support reading read-only switch. assuming write-enable.
  347. <6>[ 1.108980] mmc0: new high speed SDHC card at address ffcb
  348. <6>[ 1.110060] mmcblk0: mmc0:ffcb SD04G 3.69 GiB
  349. <6>[ 1.110246] mmcblk0: unknown partition table
  350. <6>[ 1.113500] mmcblk mmc0:ffcb: Card claimed for testing.
  351. <6>[ 1.113526] mmc1 mmc_rescan detect a newly inserted card
  352. <3>[ 1.154380] mmc1: Command timeout(CMD = 8, ARG = 0x000001AA)
  353. <6>[ 1.159480] mmc1 mmc_rescan search SDIO card
  354. <3>[ 1.160320] mmc1: Command timeout(CMD = 5, ARG = 0x00000000)
  355. <3>[ 1.166140] mmc1: Command timeout(CMD = 5, ARG = 0x00000000)
  356. <3>[ 1.171973] mmc1: Command timeout(CMD = 5, ARG = 0x00000000)
  357. <3>[ 1.177800] mmc1: Command timeout(CMD = 5, ARG = 0x00000000)
  358. <6>[ 1.183300] mmc1 mmc_rescan search SD card
  359. <3>[ 1.184140] mmc1: Command timeout(CMD = 55, ARG = 0x00000000)
  360. <3>[ 1.190153] mmc1: Command timeout(CMD = 55, ARG = 0x00000000)
  361. <3>[ 1.196100] mmc1: Command timeout(CMD = 55, ARG = 0x00000000)
  362. <3>[ 1.201966] mmc1: Command timeout(CMD = 55, ARG = 0x00000000)
  363. <6>[ 1.207046] mmc1 mmc_rescan search MMC card
  364. <3>[ 1.207880] mmc1: Command timeout(CMD = 1, ARG = 0x00000000)
  365. <4>[ 1.219460] smd_shdiag_open
  366. <4>[ 1.219473] smd_shdiag_read
  367. <4>[ 1.219480] smd_shdiag_release
  368. <4>[ 1.219500] smd_support_open
  369. <4>[ 1.219513] smd_support_read
  370. <4>[ 1.219520] smd_support_release
  371. <5>[ 1.219533] init: property_init
  372. <5>[ 1.219886] init: property_get
  373. <5>[ 1.219906] init: open /dev/console
  374. <4>[ 1.219986] shfsinit_read
  375. <5>[ 1.261913] init: [init.rc] init trigger start
  376. <6>[ 1.261940] init: processing action 0x2ce58 (init)
  377. <6>[ 1.261966] init: command 'sysclktz' r=0
  378. <6>[ 1.261973] init: command 'loglevel' r=0
  379. <6>[ 1.261993] init: command 'export' r=0
  380. <6>[ 1.262006] init: command 'export' r=0
  381. <6>[ 1.262020] init: command 'export' r=0
  382. <6>[ 1.262033] init: command 'export' r=0
  383. <6>[ 1.262046] init: command 'export' r=0
  384. <6>[ 1.262053] init: command 'export' r=0
  385. <6>[ 1.262066] init: command 'export' r=0
  386. <6>[ 1.262080] init: command 'export' r=0
  387. <6>[ 1.262093] init: command 'export' r=0
  388. <6>[ 1.262153] init: command 'symlink' r=0
  389. <6>[ 1.262193] init: command 'mkdir' r=0
  390. <6>[ 1.262220] init: command 'mkdir' r=0
  391. <6>[ 1.262240] init: command 'mkdir' r=-17
  392. <6>[ 1.262260] init: command 'mkdir' r=0
  393. <6>[ 1.262286] init: command 'mkdir' r=0
  394. <6>[ 1.262313] init: command 'mkdir' r=0
  395. <5>[ 1.262326] init: [mount] tmpfs <5>init: ret:0
  396. <6>[ 1.262546] init: command 'mount' r=0
  397. <6>[ 1.262580] init: command 'mkdir' r=0
  398. <5>[ 1.262586] init: [mount] tmpfs <5>init: ret:0
  399. <6>[ 1.262706] init: command 'mount' r=0
  400. <6>[ 1.262746] init: command 'mkdir' r=0
  401. <5>[ 1.262760] init: [mount] tmpfs <5>init: ret:0
  402. <6>[ 1.262873] init: command 'mount' r=0
  403. <6>[ 1.262900] init: command 'mkdir' r=0
  404. <5>[ 1.262913] init: [mount] tmpfs <5>init: ret:0
  405. <6>[ 1.263026] init: command 'mount' r=0
  406. <6>[ 1.263053] init: command 'mkdir' r=0
  407. <5>[ 1.263066] init: [mount] tmpfs <5>init: ret:0
  408. <6>[ 1.263180] init: command 'mount' r=0
  409. <6>[ 1.263206] init: command 'mkdir' r=0
  410. <6>[ 1.263306] init: mtd partition 0, boot
  411. <6>[ 1.263320] init: mtd partition 1, cache
  412. <6>[ 1.263340] init: mtd partition 2, recovery
  413. <6>[ 1.263353] init: mtd partition 3, splash
  414. <6>[ 1.263366] init: mtd partition 4, ipl
  415. <6>[ 1.263380] init: mtd partition 5, system
  416. <6>[ 1.263400] init: mtd partition 6, log
  417. <6>[ 1.263413] init: mtd partition 7, userdata
  418. <5>[ 1.263433] init: [mount] /dev/block/mtdblock7 <6>yaffs: dev is 32505863 name is "mtdblock7"
  419. <6>[ 1.263593] yaffs: passed flags ""
  420. <4>[ 1.263606] yaffs: Attempting MTD mount on 31.7, "mtdblock7"
  421. <4>[ 1.305800] yaffs: restored from checkpoint
  422. <4>[ 1.305833] yaffs_read_super: isCheckpointed 1
  423. <5>[ 1.305873] init: ret:0
  424. <6>[ 1.305886] init: command 'mount' r=0
  425. <6>[ 1.308386] init: command 'chown' r=0
  426. <6>[ 1.309093] init: command 'chmod' r=0
  427. <6>[ 1.309133] init: command 'mkdir' r=0
  428. <5>[ 1.309146] init: [mount] tmpfs <5>init: ret:0
  429. <6>[ 1.309300] init: command 'mount' r=0
  430. <5>[ 1.309313] init: [mount] rootfs <5>init: ret:0
  431. <6>[ 1.309440] init: command 'mount' r=0
  432. <6>[ 1.309546] init: command 'write' r=0
  433. <6>[ 1.309600] init: command 'write' r=-1
  434. <6>[ 1.309653] init: command 'write' r=0
  435. <6>[ 1.309686] init: command 'write' r=-1
  436. <6>[ 1.309720] init: command 'write' r=-1
  437. <6>[ 1.309753] init: command 'write' r=0
  438. <6>[ 1.309780] init: command 'mkdir' r=0
  439. <5>[ 1.309786] init: [mount] none <5>init: ret:-1
  440. <6>[ 1.310213] init: command 'mount' r=-1
  441. <6>[ 1.310260] init: command 'chown' r=0
  442. <6>[ 1.310280] init: command 'chown' r=-2
  443. <6>[ 1.310293] init: command 'chmod' r=-2
  444. <6>[ 1.310380] init: command 'write' r=0
  445. <6>[ 1.310420] init: command 'mkdir' r=0
  446. <6>[ 1.310440] init: command 'chown' r=-2
  447. <6>[ 1.310460] init: command 'chmod' r=-2
  448. <6>[ 1.310506] init: command 'write' r=0
  449. <6>[ 1.310533] init: command 'mkdir' r=0
  450. <6>[ 1.310553] init: command 'chown' r=-2
  451. <6>[ 1.310573] init: command 'chmod' r=-2
  452. <6>[ 1.310620] init: command 'write' r=0
  453. <5>[ 1.310633] init: [mount] /dev/block/mtdblock5 <6>yaffs: dev is 32505861 name is "mtdblock5"
  454. <6>[ 1.310800] yaffs: passed flags ""
  455. <4>[ 1.310813] yaffs: Attempting MTD mount on 31.5, "mtdblock5"
  456. <7>[ 1.510046] [ShKey]Connect2InputSys(PID:4)
  457. <7>[ 1.510060] [ShKey]CreateInputDev(PID:4)
  458. <6>[ 1.510433] input: SH_qwerty_key as /devices/virtual/input/input5
  459. <7>[ 1.510453] [ShKey]OpenCB(PID:4)
  460. <7>[ 1.510460] [ShKey]Start(PID:4)
  461. <6>[ 1.514766] input: SH_touchpanel as /devices/virtual/input/input6
  462. <6>[ 1.650100] usb_lpm_enter: usb in low power mode
  463. <6>[ 1.650106] hsusb: IDLE -> OFFLINE
  464. <6>[ 1.651260] msm_hsusb_enable_ldo_off
  465. <4>[ 3.394420] yaffs tragedy: Bad object type, -255 != 1, for object 11000 at chunk 107968 during scan
  466. <6>[ 4.561066] usb_lpm_exit(): USB exited from low power mode
  467. <6>[ 4.590040] usb cable connected
  468. <6>[ 4.590826] msm_hsusb_enable_ldo_off
  469. <6>[ 4.800413] hsusb: OFFLINE -> ONLINE
  470. <6>[ 5.300966] msm_chg_usb_charger_connected
  471. <6>[ 5.300986]
  472. <6>[ 5.300986] usb_chg_legacy_detect: Standard Downstream Port
  473. <6>[ 5.304006] hsusb suspend interrupt
  474. <6>[ 5.305200] msm_chg_usb_i_is_not_available
  475. <6>[ 5.414546] hsusb reset interrupt
  476. <6>[ 5.415346] msm_chg_usb_i_is_not_available
  477. <6>[ 5.416806] hsusb resume: speed = HIGH
  478. <6>[ 5.459660] hsusb reset interrupt
  479. <6>[ 5.460413] msm_chg_usb_i_is_not_available
  480. <6>[ 5.461913] hsusb resume: speed = HIGH
  481. <6>[ 5.557666] hsusb set_configuration wValue = 1 usbcmd = 80001
  482. <6>[ 5.558640] msm_chg_usb_i_is_available
  483. <6>[ 5.559873] msm_chg_usb_i_is_available
  484. <4>[ 11.997206] yaffs_read_super: isCheckpointed 0
  485. <5>[ 11.997279] init: ret:0
  486. <6>[ 11.997293] init: command 'mount' r=0
  487. <5>[ 11.997306] init: [mount] /dev/block/mmcblk0p1 <6>kjournald starting. Commit interval 5 seconds
  488. <4>[ 15.206279] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
  489. <6>[ 15.209706] EXT3 FS on mmcblk0p1, internal journal
  490. <7>[ 15.210173] ext3_orphan_cleanup: deleting unreferenced inode 4420
  491. <6>[ 15.210253] EXT3-fs: mmcblk0p1: 1 orphan inode deleted
  492. <6>[ 15.210266] EXT3-fs: recovery complete.
  493. <6>[ 15.439173] EXT3-fs: mounted filesystem with ordered data mode.
  494. <5>[ 15.439266] init: ret:0
  495. <5>[ 15.439359] init: free_size:3520060KB
  496. <5>[ 15.439926] init: sub access ok
  497. <6>[ 15.439939] init: command 'mount' r=0
  498. <6>[ 15.440006] init: command 'chown' r=0
  499. <6>[ 15.440059] init: command 'chmod' r=0
  500. <6>[ 15.440853] init: command 'mkdir' r=-17
  501. <5>[ 15.440866] init: [mount] /dev/block/mmcblk0p2 <6>kjournald starting. Commit interval 5 seconds
  502. <6>[ 15.443359] EXT3-fs: mounted filesystem with ordered data mode.
  503. <5>[ 15.443406] init: ret:0
  504. <6>[ 15.443419] init: command 'mount' r=0
  505. <6>[ 15.443453] init: command 'chown' r=-30
  506. <6>[ 15.443473] init: command 'chmod' r=-30
  507. <5>[ 15.443486] init: [mount] /dev/block/mtdblock1 <6>yaffs: dev is 32505857 name is "mtdblock1"
  508. <6>[ 15.443653] yaffs: passed flags ""
  509. <4>[ 15.443659] yaffs: Attempting MTD mount on 31.1, "mtdblock1"
  510. <4>[ 15.444286] yaffs: restored from checkpoint
  511. <4>[ 15.444306] yaffs_read_super: isCheckpointed 1
  512. <5>[ 15.444333] init: ret:0
  513. <6>[ 15.444346] init: command 'mount' r=0
  514. <6>[ 15.445893] init: command 'chown' r=0
  515. <6>[ 15.446513] init: command 'chmod' r=0
  516. <6>[ 15.447573] init: command 'chown' r=0
  517. <6>[ 15.448246] init: command 'chmod' r=0
  518. <6>[ 15.448313] init: command 'mkdir' r=-17
  519. <6>[ 15.448346] init: command 'mkdir' r=-17
  520. <6>[ 15.448393] init: command 'mkdir' r=-17
  521. <6>[ 15.448426] init: command 'mkdir' r=-17
  522. <6>[ 15.449246] init: command 'mkdir' r=-17
  523. <6>[ 15.449286] init: command 'mkdir' r=-17
  524. <6>[ 15.449746] init: command 'mkdir' r=-17
  525. <6>[ 15.449779] init: command 'mkdir' r=-17
  526. <6>[ 15.449833] init: command 'chown' r=0
  527. <6>[ 15.450126] init: command 'chmod' r=-30
  528. <6>[ 15.450166] init: command 'chmod' r=0
  529. <6>[ 15.450213] init: command 'chmod' r=0
  530. <6>[ 15.450253] init: command 'mkdir' r=-17
  531. <6>[ 15.451106] init: command 'mkdir' r=-17
  532. <6>[ 15.451633] init: command 'mkdir' r=-17
  533. <6>[ 15.451673] init: command 'mkdir' r=-17
  534. <6>[ 15.451699] init: command 'mkdir' r=-17
  535. <6>[ 15.452459] init: command 'mkdir' r=-17
  536. <6>[ 15.452499] init: command 'mkdir' r=-17
  537. <6>[ 15.452546] init: command 'chown' r=0
  538. <6>[ 15.452573] init: command 'chmod' r=0
  539. <6>[ 15.452606] init: command 'mkdir' r=-17
  540. <6>[ 15.452846] init: command 'mkdir' r=-17
  541. <6>[ 15.452886] init: command 'chown' r=0
  542. <6>[ 15.452906] init: command 'chmod' r=0
  543. <6>[ 15.453599] init: command 'chown' r=0
  544. <6>[ 15.454219] init: command 'chmod' r=0
  545. <6>[ 15.455006] init: command 'mkdir' r=-17
  546. <6>[ 15.455053] init: command 'mkdir' r=-17
  547. <6>[ 15.455113] init: command 'chmod' r=-30
  548. <6>[ 15.455139] init: command 'chmod' r=-30
  549. <6>[ 15.455906] init: command 'mkdir' r=-17
  550. <6>[ 15.456673] init: command 'mkdir' r=-17
  551. <6>[ 15.457419] init: command 'mkdir' r=-17
  552. <6>[ 15.457953] init: command 'mkdir' r=-17
  553. <6>[ 15.458473] init: command 'mkdir' r=-17
  554. <6>[ 15.458993] init: command 'mkdir' r=-17
  555. <6>[ 15.459533] init: command 'mkdir' r=-17
  556. <6>[ 15.459566] init: command 'mkdir' r=-17
  557. <6>[ 15.459599] init: command 'mkdir' r=-17
  558. <6>[ 15.459626] init: command 'mkdir' r=-17
  559. <6>[ 15.460119] init: command 'mkdir' r=-17
  560. <6>[ 15.460166] init: command 'mkdir' r=-17
  561. <6>[ 15.460193] init: command 'mkdir' r=-17
  562. <5>[ 15.460206] init: [init.rc] init trigger end
  563. <6>[ 15.465026] init: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0'
  564. <5>[ 15.465133] init: [init.rc] boot trigger start
  565. <6>[ 15.465146] init: processing action 0x2e140 (boot)
  566. <6>[ 15.465439] init: command 'ifup' r=0
  567. <6>[ 15.465526] init: command 'hostname' r=0
  568. <6>[ 15.465566] init: command 'domainname' r=0
  569. <6>[ 15.465586] init: command 'setrlimit' r=0
  570. <6>[ 15.465619] init: command 'setprop' r=0
  571. <6>[ 15.465639] init: command 'setprop' r=0
  572. <6>[ 15.465659] init: command 'setprop' r=0
  573. <6>[ 15.465686] init: command 'setprop' r=0
  574. <6>[ 15.465706] init: command 'setprop' r=0
  575. <6>[ 15.465726] init: command 'setprop' r=0
  576. <6>[ 15.465746] init: command 'setprop' r=0
  577. <6>[ 15.465766] init: command 'setprop' r=0
  578. <6>[ 15.465786] init: command 'setprop' r=0
  579. <6>[ 15.465813] init: command 'setprop' r=0
  580. <6>[ 15.465833] init: command 'setprop' r=0
  581. <6>[ 15.465853] init: command 'setprop' r=0
  582. <6>[ 15.465873] init: command 'setprop' r=0
  583. <6>[ 15.465893] init: command 'setprop' r=0
  584. <6>[ 15.465913] init: command 'setprop' r=0
  585. <6>[ 15.465939] init: command 'setprop' r=0
  586. <6>[ 15.465959] init: command 'setprop' r=0
  587. <6>[ 15.465979] init: command 'setprop' r=0
  588. <6>[ 15.465999] init: command 'setprop' r=0
  589. <6>[ 15.466126] init: command 'write' r=0
  590. <6>[ 15.466166] init: command 'write' r=0
  591. <6>[ 15.466206] init: command 'write' r=0
  592. <6>[ 15.466253] init: command 'write' r=0
  593. <6>[ 15.466333] init: command 'write' r=0
  594. <6>[ 15.466353] init: command 'chown' r=-2
  595. <6>[ 15.466373] init: command 'chown' r=-2
  596. <6>[ 15.466386] init: command 'chown' r=-2
  597. <6>[ 15.466399] init: command 'chown' r=-2
  598. <6>[ 15.466419] init: command 'chown' r=-2
  599. <6>[ 15.466453] init: command 'chown' r=0
  600. <6>[ 15.466479] init: command 'chown' r=0
  601. <6>[ 15.466499] init: command 'chown' r=0
  602. <6>[ 15.466519] init: command 'chmod' r=0
  603. <6>[ 15.466539] init: command 'chmod' r=0
  604. <6>[ 15.466553] init: command 'chmod' r=0
  605. <6>[ 15.466633] init: command 'chown' r=0
  606. <6>[ 15.466693] init: command 'chown' r=0
  607. <6>[ 15.466753] init: command 'chown' r=0
  608. <6>[ 15.466773] init: command 'chown' r=-2
  609. <6>[ 15.466786] init: command 'chown' r=-2
  610. <6>[ 15.466806] init: command 'chown' r=-2
  611. <6>[ 15.466819] init: command 'chown' r=-2
  612. <6>[ 15.466839] init: command 'chown' r=-2
  613. <6>[ 15.466859] init: command 'chown' r=-2
  614. <6>[ 15.466873] init: command 'chown' r=-2
  615. <6>[ 15.466893] init: command 'chown' r=-2
  616. <6>[ 15.466906] init: command 'chown' r=-2
  617. <6>[ 15.466926] init: command 'chown' r=-2
  618. <6>[ 15.466939] init: command 'chown' r=-2
  619. <6>[ 15.466959] init: command 'chown' r=-2
  620. <6>[ 15.466973] init: command 'chown' r=-2
  621. <6>[ 15.466993] init: command 'chown' r=-2
  622. <6>[ 15.467026] init: command 'chown' r=0
  623. <6>[ 15.467073] init: command 'chown' r=0
  624. <6>[ 15.467113] init: command 'chown' r=0
  625. <6>[ 15.467139] init: command 'chown' r=0
  626. <6>[ 15.467166] init: command 'chown' r=0
  627. <6>[ 15.467213] init: command 'chown' r=0
  628. <6>[ 15.467239] init: command 'chown' r=0
  629. <6>[ 15.467259] init: command 'chown' r=0
  630. <6>[ 15.467313] init: command 'chown' r=0
  631. <6>[ 15.467359] init: command 'chown' r=-30
  632. <6>[ 15.467379] init: command 'chmod' r=-30
  633. <6>[ 15.467406] init: command 'chown' r=-2
  634. <6>[ 15.467426] init: command 'chown' r=-2
  635. <6>[ 15.467453] init: command 'chown' r=0
  636. <6>[ 15.467473] init: command 'chmod' r=-2
  637. <6>[ 15.467486] init: command 'chmod' r=-2
  638. <6>[ 15.467513] init: command 'chown' r=0
  639. <6>[ 15.467526] init: command 'chmod' r=0
  640. <6>[ 15.467546] init: command 'chmod' r=-2
  641. <6>[ 15.467579] init: command 'chown' r=0
  642. <6>[ 15.467606] init: command 'chown' r=0
  643. <6>[ 15.467633] init: command 'chown' r=0
  644. <6>[ 15.467659] init: command 'chown' r=0
  645. <6>[ 15.467673] init: command 'chmod' r=0
  646. <6>[ 15.467693] init: command 'chmod' r=0
  647. <6>[ 15.467713] init: command 'chmod' r=0
  648. <6>[ 15.468673] init: command 'mkdir' r=-17
  649. <6>[ 15.469186] init: command 'mkdir' r=-17
  650. <6>[ 15.469993] init: command 'mkdir' r=-17
  651. <6>[ 15.470246] init: command 'mkdir' r=-17
  652. <6>[ 15.470293] init: command 'symlink' r=-1
  653. <6>[ 15.470346] init: command 'mkdir' r=-17
  654. <6>[ 15.470866] init: command 'mkdir' r=-17
  655. <6>[ 15.471099] init: command 'mkdir' r=-17
  656. <6>[ 15.471313] init: command 'mkdir' r=-17
  657. <6>[ 15.471353] init: command 'symlink' r=-1
  658. <6>[ 15.471413] init: command 'setprop' r=0
  659. <6>[ 15.471453] init: command 'setprop' r=0
  660. <6>[ 15.471486] init: command 'setprop' r=0
  661. <6>[ 15.471519] init: command 'setprop' r=0
  662. <6>[ 15.471559] init: command 'setprop' r=0
  663. <6>[ 15.471593] init: command 'setprop' r=0
  664. <6>[ 15.471626] init: command 'setprop' r=0
  665. <6>[ 15.471659] init: command 'setprop' r=0
  666. <6>[ 15.471693] init: command 'setprop' r=0
  667. <6>[ 15.471719] init: command 'setprop' r=0
  668. <3>[ 15.471733] init: service 'console' requires console
  669. <5>[ 15.471846] init: starting 'logd'
  670. <5>[ 15.473419] init: starting 'dgstmgrd'
  671. <5>[ 15.475953] init: starting 'servicemanager'
  672. <5>[ 15.478766] init: starting 'vold'
  673. <6>[ 15.479639] init: Created socket '/dev/socket/vold' with mode '660', user '0', group '1009'
  674. <5>[ 15.481939] init: starting 'usbmgrd'
  675. <6>[ 15.483226] init: Created socket '/dev/socket/usbmgrd' with mode '660', user '0', group '1009'
  676. <5>[ 15.486586] init: starting 'debuggerd'
  677. <5>[ 15.490639] init: starting 'fotad'
  678. <5>[ 15.495666] init: starting 'ril-daemon'
  679. <6>[ 15.496453] init: Created socket '/dev/socket/rild-debug' with mode '660', user '1001', group '1000'
  680. <6>[ 15.496919] init: Created socket '/dev/socket/rild' with mode '660', user '0', group '1001'
  681. <5>[ 15.500446] init: starting 'uim-daemon'
  682. <6>[ 15.502639] init: Created socket '/dev/socket/uimd' with mode '660', user '0', group '1001'
  683. <5>[ 15.505399] init: starting 'zygote'
  684. <6>[ 15.507586] init: Created socket '/dev/socket/zygote' with mode '666', user '0', group '0'
  685. <5>[ 15.509959] init: starting 'media'
  686. <5>[ 15.521386] init: starting 'mediayamaha'
  687. <3>[ 15.524346] init: cannot find '/system/bin/playmp3', disabling 'bootsound'
  688. <5>[ 15.529506] init: starting 'dbus'
  689. <6>[ 15.530633] init: Created socket '/dev/socket/dbus' with mode '666', user '1002', group '1002'
  690. <5>[ 15.537739] init: starting 'installd'
  691. <6>[ 15.539106] init: Created socket '/dev/socket/installd' with mode '600', user '1000', group '1000'
  692. <3>[ 15.542313] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
  693. <3>[ 15.544993] init: cannot find '/system/etc/init.bdb3.sh', disabling 'bdb3_init'
  694. <5>[ 15.550686] init: starting 'keystore'
  695. <6>[ 15.551459] init: Created socket '/dev/socket/keystore' with mode '666', user '0', group '0'
  696. <5>[ 15.559673] init: starting 'shlcdc_process'
  697. <5>[ 15.570993] init: starting 'shdisp_process'
  698. <5>[ 15.582679] init: starting 'wpa_supplicant'
  699. <6>[ 15.583486] init: Created socket '/dev/socket/wpa_wlan0' with mode '660', user '1010', group '1010'
  700. <5>[ 15.601206] init: starting 'synergy_service'
  701. <5>[ 15.613439] init: starting 'shsd_process'
  702. <5>[ 15.622026] init: starting 'dtvserver'
  703. <5>[ 15.631099] init: starting 'sdservice'
  704. <5>[ 15.646506] init: starting 'obexd'
  705. <6>[ 15.648066] init: Created socket '/dev/socket/obex_manager' with mode '660', user '0', group '1009'
  706. <5>[ 15.658833] init: starting 'akmd2'
  707. <5>[ 15.670453] init: starting 'shusb_process'
  708. <5>[ 15.680353] init: starting 'medousa'
  709. <5>[ 15.690973] init: starting 'dhcp-service'
  710. <5>[ 15.702859] init: starting 'port-bridge'
  711. <5>[ 15.717793] init: starting 'qmuxd'
  712. <5>[ 15.735853] init: starting 'qcom-sh'
  713. <6>[ 15.737146] init: command 'class_start' r=0
  714. <6>[ 15.737239] init: command 'setprop' r=0
  715. <6>[ 15.854433] SMD: ch 50 CLOSED -> OPENING
  716. <6>[ 15.854539] SMD: ch 50 OPENING -> OPENED
  717. <6>[ 15.854719] SMD: ch 51 CLOSED -> OPENING
  718. <6>[ 15.854799] SMD: ch 51 OPENING -> OPENED
  719. <6>[ 15.855006] SMD: ch 52 CLOSED -> OPENING
  720. <6>[ 15.855073] SMD: ch 52 OPENING -> OPENED
  721. <4>[ 16.036926] remapping device 3b3
  722. <4>[ 16.209753] UniFi SDIO Driver: v7.0 (build:198) May 19 2010 17:31:58
  723. <4>[ 16.209766] CSR SME with WEXT support
  724. <4>[ 16.230159] UniFi: Using native Linux MMC driver for SDIO.
  725. <6>[ 16.232346] init: command 'insmod' r=0
  726. <6>[ 16.232393] init: command 'setprop' r=0
  727. <6>[ 16.232486] init: command 'write' r=0
  728. <6>[ 16.232499] init: processing action 0x31f48 (boot)
  729. <6>[ 16.232553] init: command 'chown' r=-2
  730. <6>[ 16.232579] init: command 'chown' r=-2
  731. <6>[ 16.232593] init: command 'chown' r=-2
  732. <6>[ 16.232639] init: command 'chown' r=-2
  733. <6>[ 16.232673] init: command 'chown' r=0
  734. <6>[ 16.232686] init: command 'chmod' r=-2
  735. <6>[ 16.232706] init: command 'chmod' r=-2
  736. <6>[ 16.232726] init: command 'chmod' r=-2
  737. <6>[ 16.232746] init: command 'chown' r=0
  738. <6>[ 16.232766] init: command 'chmod' r=0
  739. <6>[ 16.232919] init: command 'chown' r=0
  740. <6>[ 16.232973] init: command 'chown' r=0
  741. <6>[ 16.233019] init: command 'chown' r=-2
  742. <6>[ 16.233039] init: command 'chown' r=-2
  743. <6>[ 16.233066] init: command 'chown' r=0
  744. <6>[ 16.233126] init: command 'write' r=-1
  745. <5>[ 16.233139] init: [init.rc] boot trigger end
  746. <6>[ 16.233206] init: processing action 0x2f458 (property:persist.service.adb.enable=1)
  747. <5>[ 16.233226] init: [service] start adbd
  748. <5>[ 16.233253] init: starting 'adbd'
  749. <6>[ 16.234333] warning: `adbd' uses 32-bit capabilities (legacy support in use)
  750. <6>[ 16.234399] enabling adb function
  751. <6>[ 16.234406] usb_function_enable: name = adb, enable = 1
  752. <3>[ 16.234426] usb_function_enable: function (adb) state is same
  753. <6>[ 16.235033] init: command 'start' r=0
  754. <5>[ 16.235053] init: shdiag_boot_mode:0, support_boot_mode:0
  755. <5>[ 16.235506] init: [init] for loop
  756. <6>[ 16.249893] init: waitpid returned pid 1221, status = 00000100
  757. <5>[ 16.249926] init: process 'dhcp-service', pid 1221 exited
  758. <6>[ 16.250919] init: waitpid returned pid 1225, status = 00000000
  759. <5>[ 16.250953] init: process 'qcom-sh', pid 1225 exited
  760. <3>[ 16.627473] mdlm_open: (0,8e4d4c00,8dbb0460) NULL port pointer
  761. <3>[ 16.627719] mdlm_close: NULL port pointer
  762. <3>[ 16.630886] init: sys_prop: permission denied uid:2000 name:adb.connected
  763. <6>[ 19.127266] init: waitpid returned pid 1211, status = 00000000
  764. <5>[ 19.127286] init: process 'wpa_supplicant', pid 1211 exited
  765. <6>[ 19.127406] init: processing action 0x30740 (property:init.svc.wpa_supplicant=stopped)
  766. <6>[ 19.127446] init: command 'stop' r=0
  767. <4>[ 19.229233] smd_shdiag_open
  768. <4>[ 19.229253] smd_shdiag_read
  769. <4>[ 19.229266] smd_shdiag_release
  770. <4>[ 19.230346] smd_shdiag_open
  771. <4>[ 19.230366] smd_shdiag_read
  772. <4>[ 19.230379] smd_shdiag_release
  773. <4>[ 19.238033] smd_shdiag_open
  774. <4>[ 19.238046] smd_shdiag_read
  775. <4>[ 19.238059] smd_shdiag_release
  776. <3>[ 21.371353] [bwpm] bwpm_bluetooth_on: Low-Power-mode
  777. <3>[ 21.371373] [bwpm] bwpm_bluetooth_on: RF OFF
  778. <3>[ 21.371379] [bwpm] bwpm_bluetooth_on: change status (1->0)
  779. <5>[ 23.415773] init: starting 'bootanim'
  780. <1>[ 23.480639] pmem: could not find allocation for map.
  781. <6>[ 23.603419] pmem: successful request for physical address of pmem region id 3, offset 634388480, len 4194304
  782. <6>[ 23.660146] misc kgsl: firmware: requesting yamato_pm4.fw
  783. <6>[ 23.665213] init: waitpid returned pid 1390, status = 00000000
  784. <3>[ 23.665233] init: untracked pid 1390 exited
  785. <6>[ 23.665473] misc kgsl: firmware: requesting yamato_pfp.fw
  786. <6>[ 23.668146] init: waitpid returned pid 1393, status = 00000000
  787. <3>[ 23.668166] init: untracked pid 1393 exited
  788. <6>[ 30.115586] request_suspend_state: wakeup (3->0) at 30115553410 (2010-11-28 14:18:42.577333355 UTC)
  789. <3>[ 30.899419] [bwpm] bwpm_wifi_on: RF ON
  790. <3>[ 30.930073] [bwpm] bwpm_wifi_on: change status (0->1)
  791. <6>[ 30.932859] mmc1 mmc_rescan detect a newly inserted card
  792. <3>[ 30.974273] mmc1: Command timeout(CMD = 8, ARG = 0x000001AA)
  793. <6>[ 30.979286] mmc1 mmc_rescan search SDIO card
  794. <6>[ 31.024239] mmc1: new high speed SDIO card at address 0001
  795. <4>[ 31.028126] sdio bus_id: mmc1:0001:1 - UniFi card 0x1 inserted
  796. <4>[ 31.056186] Unifi: Fetching firmware patch for firmware build 0
  797. <6>[ 31.056206] unifi1: Initialising UniFi, attempt 1
  798. <6>[ 31.056546] unifi1: Chip ID 0x07 Function 1 Block Size 512 Name UniFi-4(UF602x)
  799. <6>[ 31.100066] unifi1: Chip Version 0x2822
  800. <6>[ 31.100079] unifi1: Falling back to software hard reset
  801. <6>[ 31.100099] unifi1: Chip ID 0x07 Function 1 Block Size 512 Name UniFi-4(UF602x)
  802. <4>[ 31.190059] Unifi: Firmware build 743
  803. <4>[ 31.190073] Unifi: Fetching firmware patch for firmware build 743
  804. <6>[ 31.190093] unifi mmc1:0001:1: firmware: requesting unifi-sdio-1/a05/sta.xbv
  805. <6>[ 31.198033] init: waitpid returned pid 1439, status = 00000000
  806. <3>[ 31.198053] init: untracked pid 1439 exited
  807. <6>[ 31.198173] unifi1: unifi_dl_patch 8c9a837c 0100060e
  808. <4>[ 31.380126] uart_ioctl() >> msm_hs_request_clock_off()
  809. <4>[ 31.390073] uart_ioctl() >> msm_hs_request_clock_on()
  810. <6>[ 31.532179] unifi1: UniFi f/w protocol version 8.0 (driver 8.0)
  811. <6>[ 31.532193] unifi1: Firmware build 743: 2009-09-08 16:22 cindr0201_core_sta_rom_sdio_gc
  812. <5>[ 32.820539] unifi1: unifi1 is wlan0
  813. <6>[ 32.820566] unifi1: UniFi ready
  814. <5>[ 32.935346] init: starting 'wpa_supplicant'
  815. <6>[ 32.935826] init: Created socket '/dev/socket/wpa_wlan0' with mode '660', user '1010', group '1010'
  816. <4>[ 33.657433] smd_shdiag_open
  817. <4>[ 33.657453] smd_shdiag_read
  818. <4>[ 33.657466] smd_shdiag_release
  819. <4>[ 33.663426] smd_shdiag_open
  820. <4>[ 33.663453] smd_shdiag_read
  821. <4>[ 33.663466] smd_shdiag_release
  822. <4>[ 33.667466] smd_shdiag_open
  823. <4>[ 33.667486] smd_shdiag_read
  824. <4>[ 33.667499] smd_shdiag_release
  825. <4>[ 33.677906] smd_shdiag_open
  826. <4>[ 33.677926] smd_shdiag_read
  827. <4>[ 33.677939] smd_shdiag_release
  828. <4>[ 33.682639] smd_shdiag_open
  829. <4>[ 33.682653] smd_shdiag_read
  830. <4>[ 33.682666] smd_shdiag_release
  831. <4>[ 33.686693] smd_shdiag_open
  832. <4>[ 33.686713] smd_shdiag_read
  833. <4>[ 33.686726] smd_shdiag_release
  834. <4>[ 33.687399] smd_shdiag_open
  835. <4>[ 33.687413] smd_shdiag_read
  836. <4>[ 33.687426] smd_shdiag_release
  837. <4>[ 33.701333] smd_shdiag_open
  838. <4>[ 33.701353] smd_shdiag_read
  839. <4>[ 33.701366] smd_shdiag_release
  840. <4>[ 33.772513] smd_shdiag_open
  841. <4>[ 33.772533] smd_shdiag_read
  842. <4>[ 33.772539] smd_shdiag_release
  843. <4>[ 33.773039] smd_shdiag_open
  844. <4>[ 33.773053] smd_shdiag_read
  845. <4>[ 33.773059] smd_shdiag_release
  846. <4>[ 33.920246] smd_shdiag_open
  847. <4>[ 33.920266] smd_shdiag_read
  848. <4>[ 33.920279] smd_shdiag_release
  849. <4>[ 33.920779] smd_shdiag_open
  850. <4>[ 33.920793] smd_shdiag_read
  851. <4>[ 33.920806] smd_shdiag_release
  852. <4>[ 33.921246] smd_shdiag_open
  853. <4>[ 33.921259] smd_shdiag_read
  854. <4>[ 33.921266] smd_shdiag_release
  855. <4>[ 33.921939] smd_shdiag_open
  856. <4>[ 33.921959] smd_shdiag_read
  857. <4>[ 33.921966] smd_shdiag_release
  858. <4>[ 33.922786] smd_shdiag_open
  859. <4>[ 33.922799] smd_shdiag_read
  860. <4>[ 33.922813] smd_shdiag_release
  861. <4>[ 33.923573] smd_shdiag_open
  862. <4>[ 33.923586] smd_shdiag_read
  863. <4>[ 33.923599] smd_shdiag_release
  864. <4>[ 33.924353] smd_shdiag_open
  865. <4>[ 33.924373] smd_shdiag_read
  866. <4>[ 33.924379] smd_shdiag_release
  867. <5>[ 33.990833] init: starting 'dhcpcd'
  868. <6>[ 34.220506] init: processing action 0x31ed8 (property:dev.bootcomplete=1)
  869. <6>[ 34.220579] init: command 'stop' r=0
  870. <5>[ 34.220593] init: [service] start dhcp-service
  871. <5>[ 34.220626] init: starting 'dhcp-service'
  872. <6>[ 34.235533] init: command 'start' r=0
  873. <6>[ 34.235886] init: waitpid returned pid 1488, status = 00000100
  874. <5>[ 34.235906] init: process 'dhcp-service', pid 1488 exited
  875. <3>[ 35.104873] unifi1: SIWSCAN: Scan returned error -5
  876. <4>[ 35.633919] smd_shdiag_open
  877. <4>[ 35.633946] smd_shdiag_read
  878. <4>[ 35.633959] smd_shdiag_release
  879. <4>[ 35.634666] smd_shdiag_open
  880. <4>[ 35.634679] smd_shdiag_read
  881. <4>[ 35.634693] smd_shdiag_release
  882. <4>[ 35.635373] smd_shdiag_open
  883. <4>[ 35.635393] smd_shdiag_read
  884. <4>[ 35.635399] smd_shdiag_release
  885. <4>[ 35.636046] smd_shdiag_open
  886. <4>[ 35.636066] smd_shdiag_read
  887. <4>[ 35.636073] smd_shdiag_release
  888. <3>[ 36.571959] ARD - ENABLING I2S GPIOs, device = 48
  889. <5>[ 38.198059] init: service 'bootanim' is being killed
  890. <6>[ 38.200866] init: waitpid returned pid 1385, status = 0000000f
  891. <5>[ 38.200886] init: process 'bootanim', pid 1385 exited
  892. <6>[ 38.202786] init: processing action 0x32a30 (property:dev.bootdone=1)
  893. <5>[ 38.202833] init: [service] start qcom-post-boot
  894. <5>[ 38.202866] init: starting 'qcom-post-boot'
  895. <6>[ 38.215346] init: command 'start' r=0
  896. <6>[ 38.215679] init: waitpid returned pid 1628, status = 00000000
  897. <5>[ 38.215699] init: process 'qcom-post-boot', pid 1628 exited
  898. <3>[ 39.487366] NOHZ: local_softirq_pending 08
  899. <6>[ 39.807353] unifi1: IP address assigned for wlan0
  900. <3>[ 40.152559] unifi1: Delete key request was rejected with result -5<3>unifi1: Delete key request was rejected with result -5<3>NOHZ: local_softirq_pending 08
  901. <3>[ 42.539079] ARD - DISABLING GPIOs for I2S, device = 48
  902. <3>[ 42.855299] NOHZ: local_softirq_pending 08
  903. <3>[ 43.758773] NOHZ: local_softirq_pending 08
  904. <3>[ 48.647953] NOHZ: local_softirq_pending 08
  905. <3>[ 49.242399] NOHZ: local_softirq_pending 08
  906. <3>[ 49.310493] NOHZ: local_softirq_pending 08
  907. <3>[ 50.326593] NOHZ: local_softirq_pending 08
  908. <4>[ 50.740679] uart_ioctl() >> msm_hs_request_clock_off()
  909. <3>[ 51.457273] NOHZ: local_softirq_pending 08
  910. <3>[ 51.764246] NOHZ: local_softirq_pending 08
Advertisement
Add Comment
Please, Sign In to add comment