API tools faq
paste
Advertisement
hugh_1977

boot

hugh_1977
Apr 24th, 2013
153
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.84 KB | None | 0 0
raw download clone embed print report
  1. booting Linux kernel with devicetree
  2. Uncompressing Linux... done, booting the kernel.
  3. [ 0.000000] Booting Linux on physical CPU 0x0
  4. [ 0.000000] Linux version 3.9.0-rc1-39477-g4764f61-dirty (brian@thermodynamics-two) (gcc version 4.6.1 (Sourcery CodeBench Lite 3
  5. [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
  6. [ 0.000000] CPU: VIVT data cache, VIVT instruction cache
  7. [ 0.000000] Machine: Freescale i.MX28 (Device Tree), model: Crystalfontz CFA-10049 Board
  8. [ 0.000000] cma: Found region@0, memory base 0, size 12 MiB
  9. [ 0.000000] cma: CMA: reserved 12 MiB at 4f400000
  10. [ 0.000000] cma: CMA: reserved 16 MiB at 4e400000
  11. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  12. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
  13. [ 0.000000] Kernel command line: console=ttyAMA0,115200 root=/dev/mmcblk0p3 rootfstype=ext3 rootwait g_ether.iManufacturer=Crys0
  14. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  15. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  16. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  17. [ 0.000000] __ex_table already sorted, skipping sort
  18. [ 0.000000] Memory: 256MB = 256MB total
  19. [ 0.000000] Memory: 218988k/218988k available, 43156k reserved, 0K highmem
  20. [ 0.000000] Virtual kernel memory layout:
  21. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  22. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  23. [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
  24. [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
  25. [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  26. [ 0.000000] .text : 0xc0008000 - 0xc060b818 (6159 kB)
  27. [ 0.000000] .init : 0xc060c000 - 0xc062e460 ( 138 kB)
  28. [ 0.000000] .data : 0xc0630000 - 0xc0674008 ( 273 kB)
  29. [ 0.000000] .bss : 0xc0674008 - 0xc0bc1d08 (5432 kB)
  30. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  31. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  32. [ 0.000000] of_irq_init: children remain, but no parents
  33. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  34. [ 0.000000] Console: colour dummy device 80x30
  35. [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  36. [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
  37. [ 0.000000] ... MAX_LOCK_DEPTH: 48
  38. [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
  39. [ 0.000000] ... CLASSHASH_SIZE: 4096
  40. [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
  41. [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
  42. [ 0.000000] ... CHAINHASH_SIZE: 16384
  43. [ 0.000000] memory used by lock dependency info: 3695 kB
  44. [ 0.000000] per task-struct memory footprint: 1152 bytes
  45. [ 0.001735] Calibrating delay loop... 226.09 BogoMIPS (lpj=1130496)
  46. [ 0.070909] pid_max: default: 32768 minimum: 301
  47. [ 0.071757] Mount-cache hash table entries: 512
  48. [ 0.112831] CPU: Testing write buffer coherency: ok
  49. [ 0.116243] Setting up static identity map for 0xc046fd60 - 0xc046fd9c
  50. [ 0.128081] devtmpfs: initialized
  51. [ 0.136081] pinctrl core: initialized pinctrl subsystem
  52. [ 0.142189] regulator-dummy: no parameters
  53. [ 0.149610] NET: Registered protocol family 16
  54. [ 0.159736] DMA: preallocated 256 KiB pool for atomic coherent allocations
  55. [ 0.224462] cma: Assigned CMA to cfa10049_fiq.16 device
  56. [ 0.225190] Serial: AMBA PL011 UART driver
  57. [ 0.227316] 80074000.serial: ttyAMA0 at MMIO 0x80074000 (irq = 205) is a PL011 rev2
  58. [ 0.551478] console [ttyAMA0] enabled
  59. [ 0.591479] bio: create slab <bio-0> at 0
  60. [ 0.605896] mxs-dma 80004000.dma-apbh: initialized
  61. [ 0.617815] mxs-dma 80024000.dma-apbx: initialized
  62. [ 0.625016] usb1_vbus: 5000 mV
  63. [ 0.630687] SCSI subsystem initialized
  64. [ 0.635866] usbcore: registered new interface driver usbfs
  65. [ 0.641963] usbcore: registered new interface driver hub
  66. [ 0.648045] usbcore: registered new device driver usb
  67. [ 0.665844] pps_core: LinuxPPS API ver. 1 registered
  68. [ 0.670854] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  69. [ 0.680301] PTP clock support registered
  70. [ 0.686249] Advanced Linux Sound Architecture Driver Initialized.
  71. [ 0.697169] Bluetooth: Core ver 2.16
  72. [ 0.701075] NET: Registered protocol family 31
  73. [ 0.705698] Bluetooth: HCI device and connection manager initialized
  74. [ 0.712381] Bluetooth: HCI socket layer initialized
  75. [ 0.717511] Bluetooth: L2CAP socket layer initialized
  76. [ 0.722864] Bluetooth: SCO socket layer initialized
  77. [ 0.730488] cfg80211: Calling CRDA to update world regulatory domain
  78. [ 0.741735] Switching to clocksource mxs_timer
  79. [ 1.022163] NET: Registered protocol family 2
  80. [ 1.030049] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  81. [ 1.037743] TCP bind hash table entries: 2048 (order: 4, 73728 bytes)
  82. [ 1.046500] TCP: Hash tables configured (established 2048 bind 2048)
  83. [ 1.053353] TCP: reno registered
  84. [ 1.056846] UDP hash table entries: 256 (order: 2, 20480 bytes)
  85. [ 1.063399] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
  86. [ 1.072150] NET: Registered protocol family 1
  87. [ 1.079856] RPC: Registered named UNIX socket transport module.
  88. [ 1.085840] RPC: Registered udp transport module.
  89. [ 1.090739] RPC: Registered tcp transport module.
  90. [ 1.095488] RPC: Registered tcp NFSv4.1 backchannel transport module.
  91. [ 1.103472] NetWinder Floating Point Emulator V0.97 (double precision)
  92. [ 1.181252] NFS: Registering the id_resolver key type
  93. [ 1.187714] Key type id_resolver registered
  94. [ 1.191972] Key type id_legacy registered
  95. [ 1.196306] msgmni has been set to 483
  96. [ 1.208334] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  97. [ 1.216031] io scheduler noop registered (default)
  98. [ 1.236672] mxsfb 80030000.lcdif: initialized
  99. [ 1.242040] Width 128
  100. [ 1.244347] Height 32
  101. [ 1.246805] Offset 0
  102. [ 1.252413] ssd1307fb 0-003c: fb1: Solomon SSD1307 framebuffer device registered, using 512 bytes of video memory
  103. [ 1.264133] uart-pl011 80074000.serial: no DMA platform data
  104. [ 1.370748] cfafiq cfa10049_fiq.16: Allocated pages at address 0xce500000, with size 12MB (1048574 cells)
  105. [ 1.387477] spi_gpio spi2.8: master is unqueued, this is deprecated
  106. [ 1.399009] hx8357 spi32766.0: GPIO requested is not here yet, deferring the probe
  107. [ 1.406952] spi spi32766.0: Driver hx8357 requests probe deferral
  108. [ 1.414215] spi_gpio spi3.9: gpio-miso property not found, switching to no-rx mode
  109. [ 1.423644] spi_gpio spi3.9: master is unqueued, this is deprecated
  110. [ 1.570898] libphy: fec_enet_mii_bus: probed
  111. [ 1.579263] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  112. [ 1.586544] usbcore: registered new interface driver cdc_acm
  113. [ 1.592249] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  114. [ 1.600406] Initializing USB Mass Storage driver...
  115. [ 1.605773] usbcore: registered new interface driver usb-storage
  116. [ 1.611959] USB Mass Storage support registered.
  117. [ 1.637327] ci_hdrc ci_hdrc.1: EHCI Host Controller
  118. [ 1.643551] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
  119. [ 1.666617] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
  120. [ 1.674380] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  121. [ 1.681388] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  122. [ 1.688793] usb usb1: Product: EHCI Host Controller
  123. [ 1.693718] usb usb1: Manufacturer: Linux 3.9.0-rc1-39477-g4764f61-dirty ehci_hcd
  124. [ 1.701365] usb usb1: SerialNumber: ci_hdrc.1
  125. [ 1.713721] hub 1-0:1.0: USB hub found
  126. [ 1.718142] hub 1-0:1.0: 1 port detected
  127. [ 1.728855] gadget: using random self ethernet address
  128. [ 1.734234] gadget: using random host ethernet address
  129. [ 1.742638] usb0: MAC 72:5c:b1:00:94:cf
  130. [ 1.746701] usb0: HOST MAC 96:49:92:51:70:6a
  131. [ 1.751708] gadget: Ethernet Gadget, version: Memorial Day 2008
  132. [ 1.757940] gadget: g_ether ready
  133. [ 1.764373] mousedev: PS/2 mouse device common for all mice
  134. [ 1.772678] input: rotary.11 as /devices/rotary.11/input/input0
  135. [ 1.781961] i2c /dev entries driver
  136. [ 1.789150] i2c-mux-gpio i2cmux.13: Cannot find parent bus
  137. [ 1.794995] Driver for 1-wire Dallas network protocol.
  138. [ 1.846521] mxs-mmc 80010000.ssp: initialized
  139. [ 1.858547] usbcore: registered new interface driver usbhid
  140. [ 1.864167] usbhid: USB HID core driver
  141. [ 1.875538] input: mxs-lradc as /devices/80000000.apb/80040000.apbx/80050000.lradc/input/input1
  142. [ 1.902112] TCP: cubic registered
  143. [ 1.905516] NET: Registered protocol family 17
  144. [ 1.911308] Key type dns_resolver registered
  145. [ 1.919553] registered taskstats version 1
  146. [ 1.964567] mmc0: host does not support reading read-only switch. assuming write-enable.
  147. [ 1.975107] mmc0: new high speed SDHC card at address b368
  148. [ 1.984259] mmcblk0: mmc0:b368 00000 3.67 GiB
  149. [ 2.000315] mmcblk0: p1 p2 p3
  150. [ 2.214049] hx8357 spi32766.0: Panel probed
  151. [ 2.221199] input: gpio_keys.10 as /devices/gpio_keys.10/input/input2
  152. [ 2.230451] ------------[ cut here ]------------
  153. [ 2.235155] WARNING: at drivers/tty/tty_buffer.c:428 process_one_work+0x1b8/0x4d4()
  154. [ 2.243021] tty is NULL
  155. [ 2.245510] Modules linked in:
  156. [ 2.248815] [<c0014980>] (unwind_backtrace+0x0/0xf0) from [<c001dd30>] (warn_slowpath_common+0x4c/0x68)
  157. [ 2.258427] [<c001dd30>] (warn_slowpath_common+0x4c/0x68) from [<c001dde0>] (warn_slowpath_fmt+0x30/0x40)
  158. [ 2.268206] [<c001dde0>] (warn_slowpath_fmt+0x30/0x40) from [<c00391f4>] (process_one_work+0x1b8/0x4d4)
  159. [ 2.277810] [<c00391f4>] (process_one_work+0x1b8/0x4d4) from [<c003986c>] (worker_thread+0x128/0x3e8)
  160. [ 2.287253] [<c003986c>] (worker_thread+0x128/0x3e8) from [<c003e950>] (kthread+0xa4/0xb0)
  161. [ 2.295603] [<c003e950>] (kthread+0xa4/0xb0) from [<c000f0a8>] (ret_from_fork+0x14/0x2c)
  162. [ 2.303871] ---[ end trace 062bece802094219 ]---
  163. [ 2.310259] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  164. [ 2.317973] ALSA device list:
  165. [ 2.320989] No soundcards found.
  166. �[ 2.344319] kjournald starting. Commit interval 5 seconds
  167. [ 2.350765] EXT3-fs (mmcblk0p3): mounted filesystem with ordered data mode
  168. [ 2.358135] VFS: Mounted root (ext3 filesystem) readonly on device 179:3.
  169. [ 2.370968] devtmpfs: mounted
  170. [ 2.374900] Freeing init memory: 136K
  171. [ 2.778811] EXT3-fs (mmcblk0p3): using internal journal
  172. Starting logging: OK
  173. Starting rsyslog daemon: OK
  174. Initializing random number generator... done.
  175. Starting system message bus: Unknown username "pulse" in message bus configuration file
  176. done
  177. Starting network...
  178. [ 4.367156] eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=800f0000.etherne:00, irq=-1)
  179. udhcpc (v1.20.2) started
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!