1035

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.07.03 19:50:22 =~=~=~=~=~=~=~=~=~=~=~=
DDR Version 1.11 20180509
In
Channel 0: LPDDR4,50MHz
CS = 0
MR0=0x98
MR4=0x3
MR5=0xFF
MR8=0x8
MR12=0x4D
MR14=0x4D
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x3
MR5=0xFF
MR8=0x8
MR12=0x4D
MR14=0x4D
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,50MHz
CS = 0
MR0=0x98
MR4=0x3
MR5=0xFF
MR8=0x8
MR12=0x4D
MR14=0x4D
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x3
MR5=0xFF
MR8=0x8
MR12=0x4D
MR14=0x4D
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
256B stride
channel 0
CS = 0
MR0=0x98
MR4=0x3
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x82
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x98
MR4=0x82
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x82
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 400MHz 0,1
channel 0
CS = 0
MR0=0x98
MR4=0x82
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x98
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 800MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x2020
ch 1 ddrconfig = 0x101, ddrsize = 0x2020
pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
OUT
U-Boot SPL board init

U-Boot SPL 2017.09-gc46c7b2 (Jun 10 2018 - 18:26:37)
booted from SD
Trying to boot from MMC2
NOTICE:  BL31: v1.3(debug):d98d16e
NOTICE:  BL31: Built : 15:03:07, May 10 2018
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1151): pd status 3e
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09-gc46c7b2 (Jun 10 2018 - 18:26:51 +0000), Build: jenkins-linux-build-rock-64-257

Model: Pine64 RockPro64
DRAM:  3.9 GiB
MMC:   sdhci@fe330000: 0, dwmmc@fe320000: 1
SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environment

In:    serial@ff1a0000
Out:   serial@ff1a0000
Err:   serial@ff1a0000
Model: Pine64 RockPro64
Net:   eth0: ethernet@fe300000
Hit any key to stop autoboot:  0
Card did not respond to voltage select!
mmc_init: -95, time 20
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:6...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
reading /extlinux/extlinux.conf
688 bytes read in 3 ms (223.6 KiB/s)
select kernel
1:  kernel-latest
2:  kernel-previous
Enter choice: 1:    kernel-latest
Retrieving file: /initrd.img
reading /initrd.img
5671752 bytes read in 243 ms (22.3 MiB/s)
Retrieving file: /Image
reading /Image
28387840 bytes read in 1207 ms (22.4 MiB/s)
append: rw root=LABEL=linux-root rootwait rootfstype=ext4 panic=10 init=/sbin/init coherent_pool=1M ethaddr=aa:41:29:23:dc:d1 eth1addr= serial=b180dcc95b790fb cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
Retrieving file: /dtb
reading /dtb
53367 bytes read in 5 ms (10.2 MiB/s)
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Ramdisk to f599a000, end f5f02b48 ... OK
   Loading Device Tree to 00000000f5989000, end 00000000f5999076 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 4.18.0-rc3-1035-ayufan-g8f0ad9421420 (root@runner-f725ff63-project-6422644-concurrent-0) (gcc version 7.2.0 (Ubuntu/Linaro 7.2.0-6ubuntu1)) #1 SMP PREEMPT Tue Jul 3 17:32:12 UTC 2018
[    0.000000] Machine model: Pine64 RockPro64
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 16 MiB at 0x00000000f7000000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000f7ffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xf6fa95c0-0xf6faad7f]
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 with crng_init=0
[    0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s56216 r8192 d29800 u94208
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 999432
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: rw root=LABEL=linux-root rootwait rootfstype=ext4 panic=10 init=/sbin/init coherent_pool=1M ethaddr=aa:41:29:23:dc:d1 eth1addr= serial=b180dcc95b790fb cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
[    0.000000] Memory: 3944520K/4061184K available (17276K kernel code, 1802K rwdata, 7172K rodata, 1408K init, 475K bss, 100280K reserved, 16384K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
[    0.000000]  Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: no VLPI support, no direct LPI support
[    0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[    0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f2080000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x00000000f2040000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x00000000f2050000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001875] Console: colour dummy device 80x25
[    0.002770] console [tty0] enabled
[    0.002853] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.002892] pid_max: default: 32768 minimum: 301
[    0.003012] Security Framework initialized
[    0.005123] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.006165] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.006260] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.006316] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.027827] ASID allocator initialised with 32768 entries
[    0.031827] Hierarchical SRCU implementation.
[    0.035933] Platform MSI: interrupt-controller@fee20000 domain created
[    0.036332] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.040759] EFI services will not be available.
[    0.044670] smp: Bringing up secondary CPUs ...
[    0.064832] Detected VIPT I-cache on CPU1
[    0.064868] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.064910] CPU1: using LPI pending table @0x00000000f1440000
[    0.064958] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.084878] Detected VIPT I-cache on CPU2
[    0.084906] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.084946] CPU2: using LPI pending table @0x00000000f1460000
[    0.084979] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.104941] Detected VIPT I-cache on CPU3
[    0.104968] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.105007] CPU3: using LPI pending table @0x00000000f1490000
[    0.105039] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.127674] CPU features: enabling workaround for EL2 vector hardening
[    0.128053] Detected PIPT I-cache on CPU4
[    0.129290] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.131794] CPU4: using LPI pending table @0x00000000f14d0000
[    0.133053] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[    0.159182] Detected PIPT I-cache on CPU5
[    0.160360] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.162843] CPU5: using LPI pending table @0x00000000f1500000
[    0.163967] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[    0.167766] smp: Brought up 1 node, 6 CPUs
[    0.168173] SMP: Total of 6 processors activated.
[    0.168206] CPU features: detected: GIC system register CPU interface
[    0.168231] CPU features: detected: 32-bit EL0 Support
[    0.257638] CPU: All CPU(s) started at EL2
[    0.258117] alternatives: patching kernel code
[    0.262894] devtmpfs: initialized
[    0.280545] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.280849] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.282757] xor: measuring software checksum speed
[    0.321064]    8regs     :  1151.000 MB/sec
[    0.361269]    8regs_prefetch:  1026.000 MB/sec
[    0.401494]    32regs    :  1416.000 MB/sec
[    0.441718]    32regs_prefetch:  1190.000 MB/sec
[    0.441741] xor: using function: 32regs (1416.000 MB/sec)
[    0.441781] pinctrl core: initialized pinctrl subsystem
[    0.445688] DMI not present or invalid.
[    0.447645] NET: Registered protocol family 16
[    0.453424] audit: initializing netlink subsys (disabled)
[    0.454295] audit: type=2000 audit(0.448:1): state=initialized audit_enabled=0 res=1
[    0.463261] cpuidle: using governor menu
[    0.464517] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
[    0.464710] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.474853] DMA: preallocated 1024 KiB pool for atomic allocations
[    0.478064] Serial: AMBA PL011 UART driver
[    0.597743] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.601349] cryptd: max_cpu_qlen set to 1000
[    0.671379] raid6: int64x1  gen()   218 MB/s
[    0.739972] raid6: int64x1  xor()   218 MB/s
[    0.808013] raid6: int64x2  gen()   338 MB/s
[    0.876468] raid6: int64x2  xor()   302 MB/s
[    0.944757] raid6: int64x4  gen()   521 MB/s
[    1.013132] raid6: int64x4  xor()   383 MB/s
[    1.081445] raid6: int64x8  gen()   492 MB/s
[    1.149833] raid6: int64x8  xor()   376 MB/s
[    1.218189] raid6: neonx1   gen()   364 MB/s
[    1.286548] raid6: neonx1   xor()   427 MB/s
[    1.354956] raid6: neonx2   gen()   583 MB/s
[    1.423253] raid6: neonx2   xor()   605 MB/s
[    1.491688] raid6: neonx4   gen()   756 MB/s
[    1.559987] raid6: neonx4   xor()   724 MB/s
[    1.628400] raid6: neonx8   gen()   828 MB/s
[    1.696701] raid6: neonx8   xor()   769 MB/s
[    1.696720] raid6: using algorithm neonx8 gen() 828 MB/s
[    1.696739] raid6: .... xor() 769 MB/s, rmw enabled
[    1.696758] raid6: using neon recovery algorithm
[    1.699460] ACPI: Interpreter disabled.
[    1.703742] vcc3v3_pcie: supplied by dc_12v
[    1.706399] vcc_sys: supplied by dc_12v
[    1.710708] vgaarb: loaded
[    1.711378] SCSI subsystem initialized
[    1.712919] usbcore: registered new interface driver usbfs
[    1.713118] usbcore: registered new interface driver hub
[    1.713442] usbcore: registered new device driver usb
[    1.715831] media: Linux media interface: v0.10
[    1.715975] videodev: Linux video capture interface: v2.00
[    1.716444] pps_core: LinuxPPS API ver. 1 registered
[    1.716471] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.716533] PTP clock support registered
[    1.719930] Advanced Linux Sound Architecture Driver Initialized.
[    1.721026] Bluetooth: Core ver 2.22
[    1.721125] NET: Registered protocol family 31
[    1.721148] Bluetooth: HCI device and connection manager initialized
[    1.721188] Bluetooth: HCI socket layer initialized
[    1.721211] Bluetooth: L2CAP socket layer initialized
[    1.721302] Bluetooth: SCO socket layer initialized
[    1.721349] NetLabel: Initializing
[    1.721366] NetLabel:  domain hash size = 128
[    1.721386] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.721521] NetLabel:  unlabeled traffic allowed by default
[    1.726246] clocksource: Switched to clocksource arch_sys_counter
[    1.727210] VFS: Disk quotas dquot_6.6.0
[    1.727317] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.727682] pnp: PnP ACPI: disabled
[    1.759792] NET: Registered protocol family 2
[    1.761981] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[    1.762238] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    1.762818] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.763603] TCP: Hash tables configured (established 32768 bind 32768)
[    1.764250] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.764447] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.764923] NET: Registered protocol family 1
[    1.768450] RPC: Registered named UNIX socket transport module.
[    1.768477] RPC: Registered udp transport module.
[    1.768498] RPC: Registered tcp transport module.
[    1.768516] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.772371] Trying to unpack rootfs image as initramfs...
[    2.235610] Freeing initrd memory: 5536K
[    2.244192] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    2.247726] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    2.248778] kvm [1]: 8-bit VMID
[    2.251380] kvm [1]: vgic-v2@fff20000
[    2.252677] kvm [1]: GIC system register CPU interface enabled
[    2.255633] kvm [1]: vgic interrupt IRQ10
[    2.258073] kvm [1]: Hyp mode initialized successfully
[    2.278803] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[    2.295149] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.297149] NFS: Registering the id_resolver key type
[    2.297297] Key type id_resolver registered
[    2.297315] Key type id_legacy registered
[    2.297343] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    2.297839] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    2.300620] fuse init (API version 7.27)
[    2.302262] 9p: Installing v9fs 9p2000 file system support
[    2.302442] pstore: using deflate compression
[    2.352478] NET: Registered protocol family 38
[    2.353058] Key type asymmetric registered
[    2.353087] Asymmetric key parser 'x509' registered
[    2.353989] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    2.354885] io scheduler noop registered
[    2.355523] io scheduler cfq registered (default)
[    2.355550] io scheduler mq-deadline registered
[    2.355571] io scheduler kyber registered
[    2.367507] vcc5v0_host: supplied by vcc_sys
[    2.424717] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.424921] dma-pl330 ff6d0000.dma-controller:   DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    2.432852] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.433037] dma-pl330 ff6e0000.dma-controller:   DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    2.442229] pwm-regulator: supplied by vcc_sys
[    2.443102] vcc3v3_sys: supplied by vcc_sys
[    2.455186] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.460026] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A
[    2.462280] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 38, base_baud = 1500000) is a 16550A
[    2.569604] console [ttyS2] enabled
[    2.573170] SuperH (H)SCI(F) driver initialized
[    2.575162] msm_serial: driver initialized
[    2.598626] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    2.624253] brd: module loaded
[    2.642905] loop: module loaded
[    2.692173] libphy: Fixed MDIO Bus: probed
[    2.694715] tun: Universal TUN/TAP device driver, 1.6
[    2.700351] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    2.701039] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    2.702387] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    2.703024] igb: Copyright (c) 2007-2014 Intel Corporation.
[    2.703680] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    2.704392] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    2.706140] sky2: driver version 1.30
[    2.710223] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[    2.711111] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    2.711762] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[    2.712280] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
[    2.712802] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    2.713497] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    2.719065] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    2.721135] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[    2.721853] rk_gmac-dwmac fe300000.ethernet:     DWMAC1000
[    2.722332] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[    2.723009] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[    2.723686] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[    2.724162] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[    2.724798] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[    2.725462] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[    2.726002] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[    2.726533] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    2.991005] libphy: stmmac: probed
[    2.991403] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[    2.992532] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[    2.996862] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    2.997911] usbcore: registered new interface driver pegasus
[    2.998496] usbcore: registered new interface driver rtl8150
[    2.999082] usbcore: registered new interface driver r8152
[    2.999678] usbcore: registered new interface driver asix
[    3.000230] usbcore: registered new interface driver ax88179_178a
[    3.000850] usbcore: registered new interface driver cdc_ether
[    3.001560] usbcore: registered new interface driver dm9601
[    3.002141] usbcore: registered new interface driver CoreChips
[    3.002740] usbcore: registered new interface driver smsc75xx
[    3.003341] usbcore: registered new interface driver smsc95xx
[    3.003920] usbcore: registered new interface driver net1080
[    3.004497] usbcore: registered new interface driver plusb
[    3.005049] usbcore: registered new interface driver cdc_subset
[    3.005725] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    3.006519] usbcore: registered new interface driver cdc_ncm
[    3.007758] VFIO - User Level meta-driver version: 0.3
[    3.012381] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2
[    3.026511] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
[    3.033196] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2
[    3.043717] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.044400] ehci-pci: EHCI PCI platform driver
[    3.044910] ehci-platform: EHCI generic platform driver
[    3.048224] ehci-platform fe380000.usb: EHCI Host Controller
[    3.048790] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[    3.052411] ehci-platform fe380000.usb: irq 30, io mem 0xfe380000
[    3.065633] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    3.067748] hub 1-0:1.0: USB hub found
[    3.068142] hub 1-0:1.0: 1 port detected
[    3.071941] ehci-platform fe3c0000.usb: EHCI Host Controller
[    3.072497] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[    3.076044] ehci-platform fe3c0000.usb: irq 32, io mem 0xfe3c0000
[    3.089590] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    3.091377] hub 2-0:1.0: USB hub found
[    3.091764] hub 2-0:1.0: 1 port detected
[    3.093092] ehci-orion: EHCI orion driver
[    3.094140] ehci-exynos: EHCI EXYNOS driver
[    3.094819] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.095537] ohci-pci: OHCI PCI platform driver
[    3.096127] ohci-platform: OHCI generic platform driver
[    3.096956] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    3.097711] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[    3.100225] ohci-platform fe3a0000.usb: irq 31, io mem 0xfe3a0000
[    3.162958] hub 3-0:1.0: USB hub found
[    3.163347] hub 3-0:1.0: 1 port detected
[    3.164764] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    3.165653] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[    3.167314] ohci-platform fe3e0000.usb: irq 33, io mem 0xfe3e0000
[    3.230553] hub 4-0:1.0: USB hub found
[    3.230954] hub 4-0:1.0: 1 port detected
[    3.232174] ohci-exynos: OHCI EXYNOS driver
[    3.234527] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.235086] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[    3.238484] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    3.239408] xhci-hcd xhci-hcd.0.auto: irq 218, io mem 0xfe800000
[    3.241905] hub 5-0:1.0: USB hub found
[    3.242302] hub 5-0:1.0: 1 port detected
[    3.243230] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.243752] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[    3.244457] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0  SuperSpeed
[    3.245147] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.246965] hub 6-0:1.0: USB hub found
[    3.247373] hub 6-0:1.0: 1 port detected
[    3.248606] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    3.249132] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
[    3.279369] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    3.285120] xhci-hcd xhci-hcd.1.auto: irq 219, io mem 0xfe900000
[    3.304258] hub 7-0:1.0: USB hub found
[    3.304996] hub 7-0:1.0: 1 port detected
[    3.305947] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    3.306539] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
[    3.307272] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0  SuperSpeed
[    3.308069] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.310055] hub 8-0:1.0: USB hub found
[    3.310444] hub 8-0:1.0: 1 port detected
[    3.312396] usbcore: registered new interface driver usb-storage
[    3.322883] i2c /dev entries driver
[    3.336794] rk808 0-001b: chip id: 0x0
[    3.344197] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    3.345145] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    3.345955] DCDC_REG1: supplied by vcc_sys
[    3.347920] DCDC_REG2: supplied by vcc_sys
[    3.348914] DCDC_REG3: supplied by vcc_sys
[    3.349774] DCDC_REG4: supplied by vcc_sys
[    3.350870] LDO_REG1: supplied by vcc_sys
[    3.352589] LDO_REG2: supplied by vcc_sys
[    3.354469] LDO_REG3: supplied by vcc_sys
[    3.355962] LDO_REG4: supplied by vcc_sys
[    3.358415] LDO_REG5: supplied by vcc_sys
[    3.359820] LDO_REG6: supplied by vcc_sys
[    3.361340] LDO_REG7: supplied by vcc_sys
[    3.362916] LDO_REG8: supplied by vcc_sys
[    3.364435] SWITCH_REG1: supplied by vcc3v3_sys
[    3.365284] SWITCH_REG2: supplied by vcc3v3_sys
[    3.371237] rk808-rtc rk808-rtc: registered as rtc0
[    3.373021] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    3.373885] fan53555-reg: supplied by vcc_sys