API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Mar 7th, 2019
247
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 108.93 KB | None | 0 0
raw download clone embed print report
  1. [ 0.314712@0] pps_core: LinuxPPS API ver. 1 registered
  2. [ 0.314725@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  3. [ 0.314786@0] PTP clock support registered
  4. [ 0.315278@0] hdmitx: system: amhdmitx_init
  5. [ 0.315292@0] hdmitx: system: Ver: 2014May6
  6. [ 0.315487@0] hdmitx: system: amhdmitx_probe
  7. [ 0.316085@0] hdmitx: system: not find match init-data
  8. [ 0.316109@0] hdmitx hpd irq = 89
  9. [ 0.316661@0] hdmitx20: Mapped PHY: 0xc0800000
  10. [ 0.316683@0] hdmitx20: Mapped PHY: 0xc1104400
  11. [ 0.316710@0] hdmitx20: Mapped PHY: 0xc8100000
  12. [ 0.316720@0] hdmitx20: Mapped PHY: 0xc8834000
  13. [ 0.316729@0] hdmitx20: Mapped PHY: 0xc883a000
  14. [ 0.316739@0] hdmitx20: Mapped PHY: 0xc883c000
  15. [ 0.316752@0] hdmitx20: Mapped PHY: 0xd0100000
  16. [ 0.316762@0] hdmitx20: Mapped PHY: 0xda83a000
  17. [ 0.316779@0] hdmitx: alread display in uboot 0x10
  18. [ 0.316824@0] avmute set to 1
  19. [ 0.317287@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=16
  20. [ 0.317308@0] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60
  21. [ 0.317328@0] tv_vout: already display in uboot
  22. [ 0.317336@0] vout_serve: vinfo mode is: 1080p60hz
  23. [ 0.317344@0] vout_serve: init mode 1080p60hz
  24. [ 0.317590@0] vout_serve: create_vout_fops OK
  25. [ 0.317602@0] vout_serve: create vout attribute OK
  26. [ 0.317610@0] vout_serve: meson_vout_probe OK
  27. [ 0.317794@0] logo: logo_init
  28. [ 0.318054@0] osd_rdma: osd_rdma_init: rdma_table p=0x75441000,op=0x75441000 , v=0xffffff80000a9000
  29. [ 0.318086@0] rdma_register, rdma_table_addr ffffff80000b9000 rdma_table_addr_phy 75442000 reg_buf ffffffc0601ca000
  30. [ 0.318100@0] rdma_register success, handle 1 table_size 4096
  31. [ 0.318109@0] osd_rdma: osd_rdma_init:osd reset rdma handle = 1.
  32. [ 0.318131@0] rdma_register, rdma_table_addr ffffff80000c9000 rdma_table_addr_phy 75443000 reg_buf ffffffc0601cb000
  33. [ 0.318145@0] rdma_register success, handle 2 table_size 4096
  34. [ 0.318153@0] osd_rdma: osd_rdma_init:osd rdma handle = 2.
  35. [ 0.318587@0] Advanced Linux Sound Architecture Driver Initialized.
  36. [ 0.320625@0] Switched to clocksource arch_sys_counter
  37. [ 0.323881@0] hdmitx: system: irq 80000002
  38. [ 0.330669@0] FS-Cache: Loaded
  39. [ 0.339766@1] NET: Registered protocol family 2
  40. [ 0.340257@1] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  41. [ 0.340383@1] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  42. [ 0.340699@1] TCP: Hash tables configured (established 16384 bind 16384)
  43. [ 0.340809@1] TCP: reno registered
  44. [ 0.340828@1] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  45. [ 0.340876@1] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  46. [ 0.341124@1] NET: Registered protocol family 1
  47. [ 0.341735@0] pwm: probe ok
  48. [ 0.342032@0] wifi: power_on_pin_OD = 0;
  49. [ 0.342050@0] aml_wifi wifi.34: [wifi_dev_probe] no power_on_pin2
  50. [ 0.342093@0] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm phandle val=25;pwm-channel1=4;pwm-channel2=12
  51. [ 0.342108@0] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm_config1[0] = 30541
  52. [ 0.342121@0] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm_config2[0] = 30518
  53. [ 0.342134@0] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm_config1[1] = 15270
  54. [ 0.342146@0] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm_config2[1] = 15259
  55. [ 0.342159@0] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm_config1[2] = 6
  56. [ 0.342171@0] aml_wifi wifi.34: [pwm_double_channel_conf_dt] pwm_config2[2] = 9
  57. [ 0.342183@0] aml_wifi wifi.34: [pwm_double_channel_conf_dt] wifi pwm dt ok
  58. [ 0.342211@0] aml_wifi wifi.34: [pwm_double_channel_conf] wifi pwm conf ok
  59. [ 0.342264@0] aml_wifi wifi.34: [wifi_dev_probe] dhd_static_buf setup
  60. [ 0.342343@0] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem: WIFI MEM Allocated
  61. [ 0.342356@0] aml_wifi wifi.34: [wifi_dev_probe] interrupt_pin=241
  62. [ 0.342368@0] aml_wifi wifi.34: [wifi_dev_probe] irq_num=100, irq_trigger_type=1
  63. [ 0.342380@0] aml_wifi wifi.34: [wifi_dev_probe] power_on_pin=240
  64. [ 0.342390@0] aml_wifi wifi.34: [wifi_dev_probe] clock_32k_pin=0
  65. [ 0.342707@1] aml_wifi wifi.34: [wifi_setup_dt] wifi_setup_dt
  66. [ 0.342756@1] aml_wifi wifi.34: [wifi_setup_dt] interrupt_pin(241)
  67. [ 0.342775@1] aml_wifi wifi.34: [wifi_setup_dt] power_on_pin(240)
  68. [ 0.342981@1] Unpacking initramfs...
  69. [ 0.355395@1] Freeing initrd memory: 4228K (ffffffc073a7f000 - ffffffc073ea0000)
  70. [ 0.357999@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
  71. [ 0.367369@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  72. [ 0.367889@1] msgmni has been set to 3606
  73. [ 0.368949@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  74. [ 0.369045@1] io scheduler noop registered (default)
  75. [ 0.369057@1] io scheduler deadline registered
  76. [ 0.369083@1] io scheduler cfq registered
  77. [ 0.369979@1] meson-rng c8834000.rng: hwrng registered
  78. [ 0.373568@1] loop: module loaded
  79. [ 0.375511@1] tun: Universal TUN/TAP device driver, 1.6
  80. [ 0.375537@1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  81. [ 0.379659@1] libphy: stmmac: probed
  82. [ 0.379686@1] eth0: PHY ID 01814400 at 8 IRQ 41 (stmmac-0:08) active
  83. [ 0.380123@1] PPP generic driver version 2.4.2
  84. [ 0.380394@1] NET: Registered protocol family 24
  85. [ 0.380522@1] usbcore: registered new interface driver smsc95xx
  86. [ 0.380929@1] platform c9000000.dwc3: Driver dwc3 requests probe deferral
  87. [ 0.381953@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  88. [ 0.381990@1] ehci-h20ahb: H20AHB-EHCI Host Controller driver
  89. [ 0.382326@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  90. [ 0.382669@1] usbcore: registered new interface driver usb-storage
  91. [ 0.382888@1] usbcore: registered new interface driver usbserial
  92. [ 0.382981@1] usbcore: registered new interface driver usbserial_generic
  93. [ 0.383072@1] usbserial: USB Serial support registered for generic
  94. [ 0.383163@1] usbcore: registered new interface driver pl2303
  95. [ 0.383245@1] usbserial: USB Serial support registered for pl2303
  96. [ 0.383838@1] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff80000ee000
  97. [ 0.384074@1] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
  98. [ 0.384113@1] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff80000fa080
  99. [ 0.384456@1] mousedev: PS/2 mouse device common for all mice
  100. [ 0.384763@1] i2c /dev entries driver
  101. [ 0.386170@1] ledtrig-cpu: registered to indicate activity on CPUs
  102. [ 0.386372@1] hidraw: raw HID events driver (C) Jiri Kosina
  103. [ 0.388952@1] usbcore: registered new interface driver usbhid
  104. [ 0.388978@1] usbhid: USB HID core driver
  105. [ 0.389192@1] ashmem: initialized
  106. [ 0.389594@1] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80000fc4c0
  107. [ 0.389632@1] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
  108. [ 0.389657@1] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
  109. [ 0.660752@0] hdmitx: plugin
  110. [ 0.716486@0] EDID Parser:
  111. [ 0.716955@0] hdmitx: get dtd0 vic: 16
  112. [ 0.716983@0] hdmitx: get dtd1 vic: 16
  113. [ 0.716984@0] hdmitx: edid: find IEEEOUT
  114. [ 0.716989@0] hdmitx: edid: check sum valid
  115. [ 0.716990@0] hdmitx: edid: check sum valid
  116. [ 0.716998@0] hdmitx: update rx hdr info 0 at edid parsing
  117. [ 0.716999@0] hdmitx: edid: Setting maxTMDSclock from range block
  118. [ 0.717004@0] hdmitx: edid: check sum valid
  119. [ 0.717006@0] hdmitx: edid: check sum valid
  120. [ 0.717008@0] hdmitx: edid: blk0 raw data
  121. [ 0.717046@0] 00ffffffffffff001e6ddf59010101012916010380331d78ea6275a3554fa027
  122. [ 0.717046@0] 125054210800714081c08100818095009040a9c0b300023a801871382d40582c
  123. [ 0.717046@0] 4500fe221100001e000000fd00383d1e530f000a202020202020000000fc0032
  124. [ 0.717046@0] 34454e34330a202020202020000000ff0053657269616c4e756d6265720a015a
  125. [ 0.717046@0]
  126. [ 0.717046@0]
  127. [ 0.717048@0] hdmitx: edid: blk1 raw data
  128. [ 0.717084@0] 02031df14a900403011412051f1013230907078301000065030c001000023a80
  129. [ 0.717084@0] 1871382d40582c4500fe221100001e011d8018711c1620582c2500fe22110000
  130. [ 0.717084@0] 9e011d007251d01e206e285500fe221100001e8c0ad08a20e02d10103e9600fe
  131. [ 0.717084@0] 22110000180000000000000000000000000000000000000000000000000000e6
  132. [ 0.717084@0]
  133. [ 0.717084@0]
  134. [ 0.717116@0] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
  135. [ 0.717124@0] hdmitx: video: auto - get current mode: 1080p60hz vmode_e 16
  136. [ 0.717127@0] hdmitx: stream colourdepth was 8 in para 0x01b49598 (invalid)
  137. [ 0.717130@0] hdmitx: update rx hdr info 0
  138. [ 0.717131@0] hdmitx: update physcial size: 510 290
  139. [ 0.717149@0] hdmitx: hdev->para now = para at 0x01b4a978
  140. [ 0.717153@0] hdmitx: Stream colourdepth is 8 in para 0x01b4a978 (1920x1080p60hz - VIC: 16)
  141. [ 0.717159@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
  142. [ 0.717165@0] hdmtix: set audio
  143. [ 0.717175@0] hdmitx tx_aud_src = 0
  144. [ 0.717202@0] hdmitx: fs = 0, cd = 4, tmds_clk = 148500
  145. [ 0.717205@0] hdmitx aud_n_para = 6144
  146. [ 0.717222@0] hdmitx set channel status
  147. [ 2.151015@3] console [ttyS0] enabled
  148. [ 2.155095@0] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80000fe4c0
  149. [ 2.161740@0] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
  150. [ 2.172238@0] hdmitx: system: hdmitx_hdcp_init
  151. [ 2.176095@0] aml_vrtc rtc.33: rtc core: registered aml_vrtc as rtc0
  152. [ 2.181969@0] secmon has 1 memory regions
  153. [ 2.185701@0] secmon: share in base: 0xffffff800011a000, share out base: 0xffffff800011c000
  154. [ 2.194006@0] secmon secmon.4: assigned reserved memory node linux,secmon ok
  155. [ 2.200934@0] secmon: probe done
  156. [ 2.204589@0] storage: storage in base: 0xffffff8001800000
  157. [ 2.209553@0] storage: storage out base: 0xffffff8001880000
  158. [ 2.215079@0] storage: storage block base: 0xffffff8001900000
  159. [ 2.220799@0] storage: probe done!
  160. [ 2.224766@0] aml_sd_emmc_probe: line 3594
  161. [ 2.228184@0] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
  162. [ 2.238069@0] aml_sd_emmc_reg_init 1149
  163. [ 2.241446@0] get property: ocr_avail, value:0x00200080
  164. [ 2.247848@0] get property: f_min, value:300000
  165. [ 2.254009@0] get property: f_max, value:50000000
  166. [ 2.260268@0] get property: max_req_size, value:0x00020000
  167. [ 2.266747@0] get property: pinname, str:emmc
  168. [ 2.272538@0] get property: card_type, value:1
  169. [ 2.278223@0] get property: gpio_dat3, str:
  170. [ 2.283650@0] get property: hw_reset, str:
  171. [ 2.289113@0] emmc:pdata->caps = c0000d47
  172. [ 2.293048@0] emmc:pdata->caps2 = 0
  173. [ 2.296493@0] emmc:pdata->pm_caps = 0
  174. [ 2.300150@0] storage 1, boot 1
  175. [ 2.303239@0] get_storage_dev return 1
  176. [ 2.340657@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  177. [ 2.340879@1] aml_sd_emmc_probe: line 3594
  178. [ 2.345257@1] aml_sd_emmc_reg_init 1149
  179. [ 2.348756@1] get property: ocr_avail, value:0x00200080
  180. [ 2.355189@1] get property: f_min, value:400000
  181. [ 2.361301@1] get property: f_max, value:100000000
  182. [ 2.367676@1] get property: max_req_size, value:0x00020000
  183. [ 2.374159@1] get property: irq_in, value:3
  184. [ 2.379836@1] get property: irq_out, value:5
  185. [ 2.385543@1] get property: gpio_cd, str:
  186. [ 2.390969@1] get property: pinname, str:sd
  187. [ 2.396570@1] get property: jtag_pin, str:
  188. [ 2.402009@1] get property: card_type, value:5
  189. [ 2.407696@1] get property: gpio_dat3, str:
  190. [ 2.413144@1] sd:pdata->caps = 7
  191. [ 2.416320@1] sd:pdata->caps2 = 0
  192. [ 2.419597@1] sd:pdata->pm_caps = 0
  193. [ 2.435333@3] emmc: BKOPS_EN bit is not set
  194. [ 2.438725@3] emmc: try set sd/emmc to DDR mode
  195. [ 2.438878@3] emmc: new DDR MMC card at address 0001
  196. [ 2.443299@3] emmc: clock 50000000, 8-bit-bus-width
  197. [ 2.443299@3]
  198. [ 2.448709@3] mmcblk0: emmc:0001 016G70 14.6 GiB
  199. [ 2.453201@3] mmcblk0boot0: emmc:0001 016G70 partition 1 4.00 MiB
  200. [ 2.459216@3] mmcblk0boot1: emmc:0001 016G70 partition 2 4.00 MiB
  201. [ 2.465238@0] [aml_is_card_insert] card IN
  202. [ 2.465325@3] mmcblk0rpmb: emmc:0001 016G70 partition 3 4.00 MiB
  203. [ 2.465347@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  204. [ 2.465389@1] aml_sd_emmc_probe: line 3594
  205. [ 2.465831@1] aml_sd_emmc_reg_init 1149
  206. [ 2.465895@1] get property: ocr_avail, value:0x00200080
  207. [ 2.465898@1] get property: f_min, value:400000
  208. [ 2.465901@1] get property: f_max, value:200000000
  209. [ 2.465904@1] get property: max_req_size, value:0x00020000
  210. [ 2.465910@1] get property: pinname, str:sdio
  211. [ 2.465914@1] get property: vol_switch_delay, value:10
  212. [ 2.465916@1] get property: card_type, value:3
  213. [ 2.465949@1] sdio:pdata->caps = 7810f
  214. [ 2.465952@1] sdio:pdata->caps2 = 0
  215. [ 2.465955@1] sdio:pdata->pm_caps = 1
  216. [ 2.510641@3] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  217. [ 2.511095@3] ion_dev has 1 memory regions
  218. [ 2.515202@3] fb: osd_init_module
  219. [ 2.515355@3] fb: viu vsync irq: 35
  220. [ 2.515362@3] meson-fb has 1 memory regions
  221. [ 2.515411@3] meson-fb meson-fb.16: assigned reserved memory node linux,meson-fb ok
  222. [ 2.515431@3] fb: osd_probe vinfo:ffffffc001b4ddc8
  223. [ 2.515436@3] fb: init fbdev bpp is:32
  224. [ 2.579119@3] mmcblk0: unknown partition table
  225. [ 2.583915@3] fb: set osd0 reverse as NONE
  226. [ 2.587537@3] [mmc_read_partition_tbl] mmc read partition OK!
  227. [ 2.593207@3] add_emmc_partition
  228. [ 2.596693@3] [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
  229. [ 2.604980@3] [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
  230. [ 2.613327@3] [mmcblk0p03] cache offset 0x000006c00000, size 0x000020000000
  231. [ 2.621680@3] [mmcblk0p04] env offset 0x000027400000, size 0x000000800000
  232. [ 2.630018@3] [mmcblk0p05] logo offset 0x000028400000, size 0x000002000000
  233. [ 2.630677@2] fb: osd probe OK
  234. [ 2.641485@2] ge2d: ge2d_init_module
  235. [ 2.641557@3] [mmcblk0p06] recovery offset 0x00002ac00000, size 0x000002000000
  236. [ 2.641757@3] [mmcblk0p07] rsv offset 0x00002d400000, size 0x000000800000
  237. [ 2.641922@3] [mmcblk0p08] tee offset 0x00002e400000, size 0x000000800000
  238. [ 2.642100@3] [mmcblk0p09] crypt offset 0x00002f400000, size 0x000002000000
  239. [ 2.642273@3] [mmcblk0p10] misc offset 0x000031c00000, size 0x000002000000
  240. [ 2.642446@3] [mmcblk0p11] boot offset 0x000034400000, size 0x000002000000
  241. [ 2.642611@3] [mmcblk0p12] system offset 0x000036c00000, size 0x000080000000
  242. [ 2.642774@3] [mmcblk0p13] data offset 0x0000b7400000, size 0x0002f4000000
  243. [ 2.642818@3] card key: card_blk_probe.
  244. [ 2.642824@3] emmc_key_init:527 emmc key lba_start:0x12020,lba_end:0x12220
  245. [ 2.642827@3] emmc key: emmc_key_init:552 ok.
  246. [ 2.647682@3] amlmmc_dtb_init: register dtb chardev
  247. [ 2.647683@3] calc ce99a1a8, store ce99a1a8
  248. [ 2.651523@3] calc ce99a1a8, store ce99a1a8
  249. [ 2.651527@3] total valid 2
  250. [ 2.652288@3] amlmmc_dtb_init: register dtb chardev OK
  251. [ 2.652289@3] Exit aml_emmc_partition_ops OK.
  252. [ 2.653718@3] mmcblk0boot1: unknown partition table
  253. [ 2.655095@3] mmcblk0boot0: unknown partition table
  254. [ 2.655410@3] clear_emmc_wait_flag
  255. [ 2.680339@0] normal card in
  256. [ 2.767964@2] ge2d: ge2d_dev major:241
  257. [ 2.772209@0] ge2d: ge2d clock is 400 MHZ
  258. [ 2.775690@0] ge2d: ge2d: pdev=ffffffc0003c8000, irq=182, rstc=0xffffffc0601de400, clk=ffffffc0002fde00
  259. [ 2.785121@0] ge2d: mapped phy: 0xd0160000
  260. [ 2.789143@0] ge2d: ge2d start monitor
  261. [ 2.793095@0] ge2d: ge2d workqueue monitor start
  262. [ 2.797540@0] codec:Amlogic A/V streaming port init
  263. [ 2.804023@0] codec:get gate demux control ok ffffffc0601b8740
  264. [ 2.807952@0] codec:get gate parser_top control ok ffffffc0601b87c0
  265. [ 2.814167@0] codec:get gate vpu_intr control ok ffffffc0601b8840
  266. [ 2.820229@0] codec:get gate vdec control ok ffffffc0601b88c0
  267. [ 2.825855@3] sd: new high speed SDHC card at address 59b4
  268. [ 2.831261@3] sd: clock 50000000, 4-bit-bus-width
  269. [ 2.831261@3]
  270. [ 2.836441@3] codec:[tsync_pcr_init]init success.
  271. [ 2.841008@3] codec:amvideocap_probe,amvideocap
  272. [ 2.845303@3] codec:use cma buf.
  273. [ 2.848719@3] mmcblk1: sd:59b4 NCard 14.7 GiB
  274. [ 2.855298@3] mmcblk1: p1 p2
  275. [ 2.855987@3] codec:vdec_request_irq ffffffc001573838, vsync
  276. [ 2.862185@3] codec:create_ge2d_work_queue video task ok
  277. [ 2.867279@3] rdma_register, rdma_table_addr ffffff8000271000 rdma_table_addr_phy 75450000 reg_buf ffffffc05f8e0000
  278. [ 2.877069@3] rdma_register success, handle 3 table_size 32768
  279. [ 2.882826@3] video_rdma:rdma_init video rdma handle = 3.
  280. [ 2.888189@3] codec:used fix clk for vdec clk source!
  281. [ 2.893182@3] codec:register clk_set_setting cpu[33]
  282. [ 2.898782@3] DI: di_module_init ok.
  283. [ 2.901645@3] DI: di_module_init: major 237
  284. [ 2.905984@3] DI: di_probe
  285. [ 2.908649@3] deinterlace has 1 memory regions
  286. [ 2.912887@3] deinterlace deinterlace.26: assigned reserved memory node linux,di_cma ok
  287. [ 2.920779@3] DI-di_probe: flag_cma: 1
  288. [ 2.924480@3] DI: CMA size 0x2400000.
  289. [ 2.928124@3] di_irq:78,timerc_irq:38
  290. [ 2.931879@3] rdma_register, rdma_table_addr ffffff800017d000 rdma_table_addr_phy 7544a000 reg_buf ffffffc0003ca000
  291. [ 2.942080@3] rdma_register success, handle 4 table_size 8192
  292. [ 2.947766@3] DI: di_probe allocate rdma channel 4.
  293. [ 2.952602@3] DI: DI hw version 2.
  294. [ 2.955968@3] 0x000000db:Y=db,U=0,V=0
  295. [ 2.959582@3] 0x000000dc:Y=dc,U=0,V=0
  296. [ 2.963209@3] 0x000000dd:Y=dd,U=0,V=0
  297. [ 2.966827@3] 0x000000de:Y=de,U=0,V=0
  298. [ 2.970450@3] 0x000000df:Y=df,U=0,V=0
  299. [ 2.974083@3] 0x000000e0:Y=e0,U=0,V=0
  300. [ 2.977694@3] 0x000000e1:Y=e1,U=0,V=0
  301. [ 2.981324@3] 0x000000e2:Y=e2,U=0,V=0
  302. [ 2.984940@3] 0x000000e3:Y=e3,U=0,V=0
  303. [ 2.988562@3] 0x000000f0:Y=f0,U=0,V=0
  304. [ 2.992192@3] 0x000000f1:Y=f1,U=0,V=0
  305. [ 2.995807@3] 0x000000f2:Y=f2,U=0,V=0
  306. [ 2.999429@3] 0x000000f3:Y=f3,U=0,V=0
  307. [ 3.003057@3] 0x000000f4:Y=f4,U=0,V=0
  308. [ 3.006674@3] 0x000000f5:Y=f5,U=0,V=0
  309. [ 3.010297@3] 0x000000f6:Y=f6,U=0,V=0
  310. [ 3.013931@3] 0x000000f7:Y=f7,U=0,V=0
  311. [ 3.017542@3] 0x000000f8:Y=f8,U=0,V=0
  312. [ 3.021172@3] 0x000000f9:Y=f9,U=0,V=0
  313. [ 3.024787@3] 0x000000fa:Y=fa,U=0,V=0
  314. [ 3.028409@3] 0x000000fb:Y=fb,U=0,V=0
  315. [ 3.032037@3] 0x000000fc:Y=fc,U=0,V=0
  316. [ 3.036252@3] efusekeynum: 4
  317. [ 3.038508@3] efusekeyname: mac offset: 0 size: 6
  318. [ 3.044900@3] efusekeyname: mac_bt offset: 6 size: 6
  319. [ 3.051277@3] efusekeyname: mac_wifi offset: 12 size: 6
  320. [ 3.057652@3] efusekeyname: usid offset: 18 size: 16
  321. [ 3.064381@3] efuse efuse.9: probe OK!
  322. [ 3.068106@3] key unify config unifykey-num is 14
  323. [ 3.072459@3] key unify fact unifykey-num is 14
  324. [ 3.076886@3] aml_unifykeys_probe:1280=============unifykey_devno:eb00000
  325. [ 3.083976@3] 6unifykey: device unifykeys created ok
  326. [ 3.088746@3] 6aml_unifykeys_init done!
  327. [ 3.092504@3] PPMGRDRV: warn: ppmgr module init func called
  328. [ 3.098160@3] PPMGRDRV: err: ppmgr_driver_probe called
  329. [ 3.103112@3] ppmgr has 1 memory regions
  330. [ 3.107020@3] PPMGRDRV: info: ppmgr_dev major:234
  331. [ 3.112006@3] PPMGRDRV: info: ppmgr_probe done
  332. [ 3.116462@3] amlogic rfkill init
  333. [ 3.119407@3] enter bt_probe of_node
  334. [ 3.122881@3] not get gpio_en
  335. [ 3.125787@3] power on valid level is high
  336. [ 3.129667@3] bt: power_on_pin_OD = 0;
  337. [ 3.550852@3] audio_dsp: [dsp]register dsp to char divece(257)
  338. [ 3.551804@3] amaudio: amaudio: driver amaudio succuess!
  339. [ 3.557022@3] [RX]-hdmirx: hdmirx_init.
  340. [ 3.560108@3] ESM HLD: Initializing...
  341. [ 3.563828@3] ESM HLD: Registering device range 'esm_rx'...
  342. [ 3.569342@3] ESM HLD: Device range 'esm_rx' has been registered.
  343. [ 3.575378@3] ESM HLD: Creating class /sys/class/elliptic_rx...
  344. [ 3.581346@3] ESM HLD: The class /sys/class/elliptic_rx has been created.
  345. [ 3.587965@3] ESM HLD: Creating device 'esm_rx'...
  346. [ 3.592908@3] ESM HLD: Device 'esm_rx' has been created.
  347. [ 3.597970@3] ESM HLD: Done initializing the HLD driver.
  348. [ 3.603241@3] module init
  349. [ 3.605988@3]
  350. [ 3.605988@3] VECM probe start
  351. [ 3.610996@3] aml_vecm_probe: ok
  352. [ 3.614586@3] saradc c1108680.saradc: initialized by BL30
  353. [ 3.619111@3] saradc c1108680.saradc: calibration start:
  354. [ 3.624422@3] saradc c1108680.saradc: nominal=0, value=6
  355. [ 3.629668@3] saradc c1108680.saradc: nominal=256, value=232
  356. [ 3.635279@3] saradc c1108680.saradc: nominal=512, value=460
  357. [ 3.640883@3] saradc c1108680.saradc: nominal=768, value=690
  358. [ 3.646487@3] saradc c1108680.saradc: nominal=1023, value=919
  359. [ 3.652141@3] saradc c1108680.saradc: calibration end: coef=4578
  360. [ 3.658369@3] remote: Driver init
  361. [ 3.661859@3] gpio-key gpio_keypad.49: gpio_key: 0 name(power) pin()
  362. [ 3.667664@3] gpio-key gpio_keypad.49: amlogic_gpio_name_map_num pin 0!::
  363. [ 3.674418@3] gpio-key gpio_keypad.49: gpio_key: 0 power(147)
  364. [ 3.680125@3] gpio-key gpio_keypad.49: start setup_timer
  365. [ 3.685352@3] gpio-key gpio_keypad.49: power key(116) registed.
  366. [ 3.691475@3] input: gpio_keypad as /devices/gpio_keypad.49/input/input0
  367. [ 3.698058@3] gpio-key gpio_keypad.49: gpio keypad register input device completed.
  368. [ 3.705456@3] input input0: gpio keypad major:231
  369. [ 3.710542@3] cpuinfo: probe done
  370. [ 3.714344@3] input: cec_input as /devices/virtual/input/input1
  371. [ 3.719557@3] cectx aocec: aml_cec_probe(): no hdmirx reg resource
  372. [ 3.725375@3] cectx aocec: aml_cec_probe(): no hhi reg resource
  373. [ 3.731331@3] cectx aocec: aml_cec_probe(): can't find hdmirx
  374. [ 3.738049@3] cec: wake up flag:0
  375. [ 3.741949@3] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe
  376. [ 3.748770@3] aml-i2s-dai I2S.41: I2S Mic is in platform!
  377. [ 3.752715@3] aml_pcm_dai: pcm mode detection =1
  378. [ 3.780646@3] input input0: key 116 up
  379. [ 3.960834@3] aml_snd_card: headphone detection disable=1
  380. [ 3.961498@3] aml_snd_m8_card aml_m8_snd.48: T9015-audio-hifi <-> I2S.41 mapping ok
  381. [ 3.968633@3] aml_snd_m8_card aml_m8_snd.48: dit-hifi <-> SPDIF.42 mapping ok
  382. [ 3.975355@3] aml_pcm: enter aml_pcm_new dai->name: PCM.43 dai->id: 0
  383. [ 3.981779@3] aml_snd_m8_card aml_m8_snd.48: pcm2bt-pcm <-> PCM.43 mapping ok
  384. [ 3.988740@3] aml_snd_m8_card aml_m8_snd.48: ASoC: no source widget found for LOUTL
  385. [ 3.996325@3] aml_snd_m8_card aml_m8_snd.48: ASoC: Failed to add route LOUTL -> direct -> Ext Spk
  386. [ 4.005118@3] aml_snd_m8_card aml_m8_snd.48: ASoC: no source widget found for LOUTR
  387. [ 4.012701@3] aml_snd_m8_card aml_m8_snd.48: ASoC: Failed to add route LOUTR -> direct -> Ext Spk
  388. [ 4.023584@3] TCP: cubic registered
  389. [ 4.025686@3] NET: Registered protocol family 10
  390. [ 4.030256@3] NET: Registered protocol family 17
  391. [ 4.034144@3] Key type dns_resolver registered
  392. [ 4.039689@3] Registering SWP/SWPB emulation handler
  393. [ 4.044124@3] regulator-dummy: disabling
  394. [ 4.748869@3] aml_snd_card: audio use jtag pinmux as i2s output, read val =0
  395. [ 4.750614@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  396. [ 4.755917@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  397. [ 4.764123@3] xhci-hcd xhci-hcd.0.auto: irq 62, io mem 0xc9000000
  398. [ 4.769802@3] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  399. [ 4.776608@3] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  400. [ 4.783927@3] usb usb1: Product: xHCI Host Controller
  401. [ 4.788920@3] usb usb1: Manufacturer: Linux 3.14.29 xhci-hcd
  402. [ 4.794532@3] usb usb1: SerialNumber: xhci-hcd.0.auto
  403. [ 4.800192@3] hub 1-0:1.0: USB hub found
  404. [ 4.803473@3] hub 1-0:1.0: 2 ports detected
  405. [ 4.807729@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  406. [ 4.813194@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  407. [ 4.821069@2] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  408. [ 4.827820@2] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  409. [ 4.835158@2] usb usb2: Product: xHCI Host Controller
  410. [ 4.840153@2] usb usb2: Manufacturer: Linux 3.14.29 xhci-hcd
  411. [ 4.845764@2] usb usb2: SerialNumber: xhci-hcd.0.auto
  412. [ 4.851364@3] hub 2-0:1.0: USB hub found
  413. [ 4.854668@3] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
  414. [ 4.862555@0] console [netcon0] enabled
  415. [ 4.865681@0] netconsole: network logging started
  416. [ 4.870434@0] aml_vrtc rtc.33: setting system clock to 2019-03-07 05:37:04 UTC (1551937024)
  417. [ 4.879737@0] cpufreq-scpi cpufreq-meson.7: enter cpufreq
  418. [ 4.884115@0] cpufreq-scpi cpufreq-meson.7: probe cpufreq okay
  419. [ 4.890710@0] gxbb_pm: enter meson_pm_probe!
  420. [ 4.894180@0] gxbb_pm: meson_pm_probe done
  421. [ 4.899051@0] cpucore_cooling_register, max_cpu_core_num:4
  422. [ 4.919206@0] aml_istbt_dev_ready NULL
  423. [ 4.919274@0] ALSA device list:
  424. [ 4.920504@0] #0: AML-M8AUDIO
  425. [ 4.924159@0] Freeing unused kernel memory: 912K (ffffffc001a01000 - ffffffc001ae5000)
  426. [ 4.988916@1] fb: Frame buffer memory assigned at
  427. [ 4.988943@1] fb: 0, phy: 0x000000003e000000, vir:0xffffff8001d00000, size=24900K
  428. [ 4.988943@1]
  429. [ 4.988964@1] fb: ---------------clear fb0 memory ffffff8001d00000
  430. [ 5.013413@1] fb: osd[0] canvas.idx =0x40
  431. [ 5.013431@1] fb: osd[0] canvas.addr=0x3e000000
  432. [ 5.013441@1] fb: osd[0] canvas.width=7680
  433. [ 5.013449@1] fb: osd[0] canvas.height=3240
  434. [ 5.013458@1] fb: osd[0] frame.width=1920
  435. [ 5.013467@1] fb: osd[0] frame.height=1080
  436. [ 5.019580@1] fb: osd[0] canvas.idx =0x40
  437. [ 5.019584@1] fb: osd[0] canvas.addr=0x3e000000
  438. [ 5.019587@1] fb: osd[0] canvas.width=7680
  439. [ 5.019590@1] fb: osd[0] canvas.height=2160
  440. [ 5.019593@1] fb: osd[0] frame.width=1920
  441. [ 5.019596@1] fb: osd[0] frame.height=1080
  442. [ 5.039887@1] fb: Frame buffer memory assigned at
  443. [ 5.039917@1] fb: 1, phy: 0x000000003f851000, vir:0xffffff8003580000, size=1024K
  444. [ 5.039917@1]
  445. [ 5.039937@1] fb: fb1 open, logo index:1
  446. [ 5.069670@3] codec:free_alloced_keep_buffer (null). (null). (null)
  447. [ 5.069912@3] vfm_map_store:rm default
  448. [ 5.069912@3]
  449. [ 5.070013@3] vfm_map_store:add default decoder ppmgr deinterlace amvideo
  450. [ 5.070013@3]
  451. [ 5.070141@3] fb: osd[0] enable: 1 (sh)
  452. [ 5.086371@3] fb: osd[1] enable: 0 (sh)
  453. [ 5.136211@2] Console: switching to colour frame buffer device 240x67
  454. [ 5.177622@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0
  455. [ 5.177639@2] dwc_otg_driver_probe host only, not probe usb_otg!!!
  456. [ 6.671770@3] random: nonblocking pool is initialized
  457. [ 6.776841@3] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities
  458. [ 6.777673@3] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities
  459. [ 6.822496@0] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
  460. [ 14.348795@3] systemd[1]: systemd 239 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
  461. [ 14.349134@3] systemd[1]: Detected architecture arm64.
  462. [ 14.351465@3] systemd[1]: Set hostname to <CoreELEC>.
  463. [ 14.393931@3] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  464. [ 14.393958@3] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  465. [ 14.488533@3] systemd[1]: Listening on initctl Compatibility Named Pipe.
  466. [ 14.489445@3] systemd[1]: Listening on Journal Socket (/dev/log).
  467. [ 14.489895@3] systemd[1]: Listening on udev Kernel Socket.
  468. [ 14.490975@3] systemd[1]: Created slice User and Session Slice.
  469. [ 14.491110@3] systemd[1]: Reached target Slices.
  470. [ 14.492128@3] systemd[1]: Listening on RPCbind Server Activation Socket.
  471. [ 14.492248@3] systemd[1]: Reached target RPC Port Mapper.
  472. [ 14.495082@3] systemd[1]: Starting Show Version...
  473. [ 14.495842@3] systemd[1]: Listening on Journal Socket.
  474. [ 14.498969@3] systemd[1]: Mounting Kernel Debug File System...
  475. [ 14.501646@3] systemd[1]: Mounting Variable Directory...
  476. [ 14.502738@3] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  477. [ 14.503262@3] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  478. [ 14.503485@3] systemd[1]: Reached target Paths.
  479. [ 14.507436@3] systemd[1]: Mounting POSIX Message Queue File System...
  480. [ 14.508734@3] systemd[1]: Listening on udev Control Socket.
  481. [ 14.512124@3] systemd[1]: Starting Debug Shell on /dev/ttyS0...
  482. [ 14.512204@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
  483. [ 14.535366@3] systemd[1]: Mounted Kernel Debug File System.
  484. [ 14.536061@3] systemd[1]: Mounted Variable Directory.
  485. [ 14.536657@3] systemd[1]: Mounted POSIX Message Queue File System.
  486. [ 14.539410@3] systemd[1]: Started Debug Shell on /dev/ttyS0.
  487. [ 14.539541@1] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
  488. [ 14.545822@3] systemd[1]: Starting Create kernel modules tree from overlays...
  489. [ 14.547965@3] systemd[1]: Started Show Version.
  490. [ 14.574820@3] kernel-overlays-setup: setup base modules
  491. [ 14.621453@3] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/3.14.29
  492. [ 14.665054@3] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
  493. [ 14.665242@3] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
  494. [ 14.666441@3] kernel-overlays-setup: done
  495. [ 14.668335@0] systemd[1]: Started Create kernel modules tree from overlays.
  496. [ 14.671561@0] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  497. [ 14.674369@0] systemd[1]: Starting Remount Root and Kernel File Systems...
  498. [ 14.681392@0] systemd[1]: Starting Load Kernel Modules...
  499. [ 14.684882@0] systemd[1]: Starting Mounting swapfile...
  500. [ 14.704434@2] systemd[1]: Starting udev Coldplug all Devices...
  501. [ 14.707252@2] systemd[1]: Starting Setup machine-id...
  502. [ 14.708575@2] systemd[1]: Started Create list of required static device nodes for the current kernel.
  503. [ 14.710430@2] systemd[1]: Started Remount Root and Kernel File Systems.
  504. [ 14.739843@1] Linux video capture interface: v2.00
  505. [ 14.753959@1] amlvid:err: amlvideo_init called
  506. [ 14.753970@1] amlvid:err: amlvideo_create_instance called
  507. [ 14.753981@1] amlvid:err: v4l2_dev.name=:amlvideo-000
  508. [ 14.754303@3] amlvideo-000: V4L2 device registered as video10
  509. [ 14.764492@2] systemd[1]: Started Setup machine-id.
  510. [ 14.768513@2] systemd[1]: Starting Journal Service...
  511. [ 14.773003@1] Triggered SDIO WiFi power on and bus rescan.
  512. [ 14.773055@1] aml_wifi wifi.34: [extern_wifi_set_enable] WIFI Disable! 240
  513. [ 14.821635@2] systemd[1]: Starting Create Static Device Nodes in /dev...
  514. [ 14.824742@2] systemd[1]: Started Mounting swapfile.
  515. [ 14.826100@2] systemd[1]: Started Create Static Device Nodes in /dev.
  516. [ 14.827082@2] systemd[1]: Reached target Local File Systems (Pre).
  517. [ 14.827247@2] systemd[1]: Reached target Swap.
  518. [ 14.829833@2] systemd[1]: Mounting Temporary Directory (/tmp)...
  519. [ 14.951207@2] systemd[1]: Started Journal Service.
  520. [ 14.991920@1] systemd-journald[1804]: Received request to flush runtime journal from PID 1
  521. [ 15.080690@1] aml_wifi wifi.34: [extern_wifi_set_enable] WIFI Enable! 240
  522. [ 15.392063@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
  523. [ 15.392094@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  524. [ 15.392173@1] aml_sd_emmc_data_thread 2639 sdio: cmd:52
  525. [ 15.393249@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
  526. [ 15.393264@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  527. [ 15.393310@1] aml_sd_emmc_data_thread 2639 sdio: cmd:52
  528. [ 15.398016@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
  529. [ 15.398033@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  530. [ 15.398079@1] aml_sd_emmc_data_thread 2639 sdio: cmd:8
  531. [ 15.441723@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
  532. [ 15.441742@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  533. [ 15.441792@1] aml_sd_emmc_data_thread 2639 sdio: cmd:52
  534. [ 15.442804@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
  535. [ 15.442813@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  536. [ 15.442832@1] aml_sd_emmc_data_thread 2639 sdio: cmd:52
  537. [ 15.447487@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
  538. [ 15.447507@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  539. [ 15.447546@1] aml_sd_emmc_data_thread 2639 sdio: cmd:8
  540. [ 15.483045@1] sdio: new high speed SDIO card at address 0001
  541. [ 15.483062@0] sdio: clock 50000000, 4-bit-bus-width
  542. [ 15.483062@0]
  543. [ 15.483604@0] [sdio_reinit] finish
  544. [ 16.283602@0] Console: switching to colour dummy device 80x25
  545. [ 16.463969@2] Registered IR keymap rc-empty
  546. [ 16.466238@2] input: meson-ir as /devices/c8100580.meson-ir/rc/rc0/input2
  547. [ 16.466676@2] rc0: meson-ir as /devices/c8100580.meson-ir/rc/rc0
  548. [ 16.478809@0] IR RC5(x) protocol handler initialized
  549. [ 16.478848@2] IR NEC protocol handler initialized
  550. [ 16.488686@2] IR JVC protocol handler initialized
  551. [ 16.489544@2] IR SANYO protocol handler initialized
  552. [ 16.489982@0] IR RC6 protocol handler initialized
  553. [ 16.490504@0] IR Sony protocol handler initialized
  554. [ 16.495317@3] lirc_dev: IR Remote Control driver registered, major 229
  555. [ 16.495328@0] IR MCE Keyboard/mouse protocol handler initialized
  556. [ 16.496839@0] input: MCE IR Keyboard/Mouse (meson-ir) as /devices/virtual/input/input3
  557. [ 16.499070@0] meson-ir c8100580.meson-ir: receiver initialized
  558. [ 16.501962@2] rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0
  559. [ 16.501979@2] IR LIRC bridge handler initialized
  560. [ 16.540115@1] mali-utgard d00c0000.mali: max pp is 3
  561. [ 16.540139@1] mali-utgard d00c0000.mali: set min pp to default 1
  562. [ 16.540145@1] mali-utgard d00c0000.mali: min pp is 1
  563. [ 16.540152@1] mali-utgard d00c0000.mali: set min clk default to 0
  564. [ 16.540158@1] mali-utgard d00c0000.mali: min clk is 0
  565. [ 16.540326@1] mali-utgard d00c0000.mali: hiu io source 0xffffff800039e000
  566. [ 16.540347@1] mali-utgard d00c0000.mali: hiu io source 0xffffff80003de000
  567. [ 16.540354@1] mali-utgard d00c0000.mali: num of pp used most of time 3
  568. [ 16.540360@1] mali-utgard d00c0000.mali: clock dvfs cfg table size is 6
  569. [ 16.540423@1] mali-utgard d00c0000.mali: max clk set 4
  570. [ 16.540429@1] mali-utgard d00c0000.mali: max clk is 4
  571. [ 16.540434@1] mali-utgard d00c0000.mali: turbo clk set to 5
  572. [ 16.540440@1] mali-utgard d00c0000.mali: turbo clk is 5
  573. [ 16.540445@1] mali-utgard d00c0000.mali: default clk is 3
  574. [ 16.540455@1] mali-utgard d00c0000.mali: ====================0====================
  575. [ 16.540455@1] clk_freq= 125000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<30 250>, clk_sample=125
  576. [ 16.540465@1] mali-utgard d00c0000.mali: ====================1====================
  577. [ 16.540465@1] clk_freq= 285000000, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 250>, clk_sample=285
  578. [ 16.540475@1] mali-utgard d00c0000.mali: ====================2====================
  579. [ 16.540475@1] clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=3, threshod=<168 250>, clk_sample=400
  580. [ 16.540486@1] mali-utgard d00c0000.mali: ====================3====================
  581. [ 16.540486@1] clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=2, threshod=<190 250>, clk_sample=500
  582. [ 16.540496@1] mali-utgard d00c0000.mali: ====================4====================
  583. [ 16.540496@1] clk_freq= 666000000, clk_parent=fclk_div3, voltage=1150, keep_count=1, threshod=<177 250>, clk_sample=666
  584. [ 16.540506@1] mali-utgard d00c0000.mali: ====================5====================
  585. [ 16.540506@1] clk_freq= 666000000, clk_parent=fclk_div3, voltage=1150, keep_count=1, threshod=<177 250>, clk_sample=666
  586. [ 16.540513@1] mali-utgard d00c0000.mali: clock dvfs table size is 6
  587. [ 16.587201@2] gpu cooling register okay with err=0
  588. [ 16.606463@2] gpu core cooling register okay with err=0
  589. [ 16.607331@2] Mali: Mali device driver loaded
  590. [ 16.979438@3] cfg80211: Calling CRDA to update world regulatory domain
  591. [ 17.022462@0] generic_wifi_init_module
  592. [ 17.022506@0] aml_wifi wifi.34: [extern_wifi_set_enable] WIFI Disable! 240
  593. [ 17.091768@2] libphy: set driving length c
  594. [ 17.091869@2] libphy: set PLL minimum jitter
  595. [ 17.122564@0] aml_wifi wifi.34: [extern_wifi_set_enable] WIFI Enable! 240
  596. [ 17.171764@2] libphy: set driving length c
  597. [ 17.171865@2] libphy: set PLL minimum jitter
  598. [ 17.222601@0] sdio_reset_comm():
  599. [ 17.226569@0] aml_sd_emmc d0070000.sdio: exceeding card's volts
  600. [ 17.254633@1] 8021q: 802.1Q VLAN Support v1.8
  601. [ 17.271715@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
  602. [ 17.271734@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  603. [ 17.271785@1] aml_sd_emmc_data_thread 2639 sdio: cmd:52
  604. [ 17.272843@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
  605. [ 17.272861@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  606. [ 17.272919@1] aml_sd_emmc_data_thread 2639 sdio: cmd:52
  607. [ 17.277566@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
  608. [ 17.277584@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  609. [ 17.277620@1] aml_sd_emmc_data_thread 2639 sdio: cmd:8
  610. [ 17.364751@1] [sdio_reinit] finish
  611. [ 17.465002@1]
  612. [ 17.465002@1] *** sta_cfg_set, /usr/lib/firmware/ssv6051/ssv6051-wifi.cfg ***
  613. [ 17.465002@1]
  614. [ 17.477973@3] ssv6xxx_sdio_init
  615. [ 17.478120@1] =======================================
  616. [ 17.478128@1] == RUN SDIO ==
  617. [ 17.478131@1] =======================================
  618. [ 17.478138@1] ssv6xxx_set_sdio_clk:set sdio clk 25000000Hz
  619. [ 17.498262@1] SSV6XXX_SDIO sdio:0001:1: vendor = 0x3030 device = 0x3030
  620. [ 17.508472@1] ssv6xxx_sdio_power_on
  621. [ 17.520901@1] SSV6XXX_SDIO sdio:0001:1: dataIOPort 0x10000 regIOPort 0x10020
  622. [ 17.521469@0] ssv6xxx_dev_probe(): ssv6200 device found !
  623. [ 17.521758@1] ssv6xxx_sdio_irq_disable
  624. [ 17.522568@1] MAC address from e-fuse
  625. [ 17.522583@1] EFUSE configuration
  626. [ 17.522588@1] Read efuse chip identity[75000000]
  627. [ 17.522591@1] r_calbration_result- 0
  628. [ 17.522594@1] sar_result- 0
  629. [ 17.522598@1] crystal_frequency_offset- 0
  630. [ 17.522601@1] tx_power_index_1- 0
  631. [ 17.522605@1] tx_power_index_2- 0
  632. [ 17.522611@1] MAC address - 3c:cf:5b:c0:88:01
  633. [ 17.522774@1] [MT-ENCRYPT]: create kthread ffffffc05eccaa80 for CPU 0, ret = 0
  634. [ 17.522801@1] SSV WLAN driver ssv6200: Crypto task 2726 running with priority 120.
  635. [ 17.522826@1] [MT-ENCRYPT]: create kthread ffffffc05bc80000 for CPU 1, ret = 0
  636. [ 17.522838@1] SSV WLAN driver ssv6200: Crypto task 2727 running with priority 120.
  637. [ 17.522858@1] [MT-ENCRYPT]: create kthread ffffffc05bc80a80 for CPU 2, ret = 0
  638. [ 17.522869@1] SSV WLAN driver ssv6200: Crypto task 2728 running with priority 120.
  639. [ 17.522890@1] [MT-ENCRYPT]: create kthread ffffffc05bc81500 for CPU 3, ret = 0
  640. [ 17.522902@1] SSV WLAN driver ssv6200: Crypto task 2729 running with priority 120.
  641. [ 17.522932@1] SSV6XXX TX Task started.
  642. [ 17.522953@1] Pre-load cipher
  643. [ 17.522993@1] SSV6XXX RX Task started.
  644. [ 17.530257@1] mic hash allocate fail
  645. [ 17.530280@1] SSV6051P setting
  646. [ 17.530287@1] SSV6XXX_IQK_CFG_XTAL_24M
  647. [ 17.530294@1] SSV6051P setting [0x6C726C72]
  648. [ 17.530298@1] TX power setting 0x6c726c72
  649. [ 17.530301@1] Volt regulator LDO
  650. [ 17.532040@1] reset PLL
  651. [ 17.551590@1] ieee80211 phy0: Selected rate control algorithm 'ssv6xxx_rate_control'
  652. [ 17.562907@0] ieee80211 phy0: SSV6200 of South Silicon Valley
  653. [ 17.564443@3] SVN version 13940
  654. [ 17.564459@3] SVN ROOT URL http://192.168.15.30/svn/software/project/release/android/box/aml_s905/6051.Q0.1009.15.e10104/ssv6xxx
  655. [ 17.564464@3] COMPILER HOST icommsemi
  656. [ 17.564467@3] COMPILER DATE 12-02-2016-11:51:23
  657. [ 17.564471@3] COMPILER OS linux
  658. [ 17.564475@3] COMPILER OS ARCH x86_64-linux-gnu-thread-multi
  659. [ 18.063605@3] CHIP TAG: 2014012420010960
  660. [ 18.063860@3] CHIP ID: RSV6200A0-201311
  661. [ 18.070864@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 904 (4) at address 80000000.
  662. [ 18.070964@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80010000.
  663. [ 18.071081@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80020000.
  664. [ 18.071186@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80030000.
  665. [ 18.071289@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80040000.
  666. [ 18.071408@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80050000.
  667. [ 18.071524@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80060000.
  668. [ 18.071625@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80070000.
  669. [ 18.071714@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 80080000.
  670. [ 18.071818@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 80090000.
  671. [ 18.071924@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 800a0000.
  672. [ 18.072026@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 800b0000.
  673. [ 18.072123@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 800c0000.
  674. [ 18.072212@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 800d0000.
  675. [ 18.072300@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 800e0000.
  676. [ 18.072387@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 800f0000.
  677. [ 18.072444@1] [A] ssv6xxx_pbuf_free addr[80080000][8788]
  678. [ 18.072532@1] [A] ssv6xxx_pbuf_free addr[80090000][8789]
  679. [ 18.072633@1] [A] ssv6xxx_pbuf_free addr[800a0000][878a]
  680. [ 18.072731@1] [A] ssv6xxx_pbuf_free addr[800b0000][878b]
  681. [ 18.072831@1] [A] ssv6xxx_pbuf_free addr[800c0000][878c]
  682. [ 18.072933@1] [A] ssv6xxx_pbuf_free addr[800d0000][878d]
  683. [ 18.072965@1] 0x800e0000
  684. [ 18.073046@1] [A] ssv6xxx_pbuf_free addr[800f0000][878f]
  685. [ 18.117160@1] ADR_INFO_IDX_ADDR[80000230] ADR_INFO_LEN_ADDR[800002cc]
  686. [ 18.119954@1] Writing firmware to SSV6XXX...
  687. [ 18.136818@1] (block_count << 16) = 4f0000,reg =4f0000
  688. [ 18.136860@1] Firmware "/usr/lib/firmware/ssv6051/ssv6051-sw.bin" loaded
  689. [ 18.190817@1] Firmware check OK.da0000 = da0000
  690. [ 18.250712@0] ssv6xxx_set_sdio_clk:set sdio clk 50000000Hz
  691. [ 18.270751@0] Firmware name sh->cfg.firmware_path=/usr/lib/firmware/ssv6051/ssv6051-sw.bin
  692. [ 18.270953@1] Firmware version 12978
  693. [ 18.270960@1] # Do init_cali (iq)
  694. [ 18.321243@1] ssv6200_start(): current channel: 1,sc->ps_status=0
  695. [ 18.323184@1] [I] ssv6200_add_interface():
  696. [ 18.323191@1] ssv6xxx_config_vif_res id[0].
  697. [ 18.323208@1] SSV WLAN driver ssv6200: VIF 3c:cf:5b:c0:88:01 of type 2 is added.
  698. [ 18.323295@1] BSS Changed use_short_preamble[0]
  699. [ 18.323300@1] BSS_CHANGED_ERP_SLOT: use_short_slot[0]
  700. [ 18.323342@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3fda008, virqc:3fff
  701. [ 18.323349@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  702. [ 18.323355@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  703. [ 18.323365@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  704. [ 18.323379@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  705. [ 18.323387@0] _do_rx(): IF_RECV() retruns -84 (dlen=257)
  706. [ 18.323526@1] NL80211_IFTYPE_STATION!!
  707. [ 18.323533@1] [I] ssv6200_bss_info_changed(): leave
  708. [ 18.323550@1] [I] sv6200_conf_tx vif[0] qos[0] queue[0] aifsn[2] cwmin[15] cwmax[1023] txop[0]
  709. [ 18.323635@1] [I] sv6200_conf_tx vif[0] qos[0] queue[1] aifsn[2] cwmin[15] cwmax[1023] txop[0]
  710. [ 18.323718@1] [I] sv6200_conf_tx vif[0] qos[0] queue[2] aifsn[2] cwmin[15] cwmax[1023] txop[0]
  711. [ 18.323799@1] [I] sv6200_conf_tx vif[0] qos[0] queue[3] aifsn[2] cwmin[15] cwmax[1023] txop[0]
  712. [ 18.323880@1] NL80211_IFTYPE_STATION!!
  713. [ 18.323884@1] [I] ssv6200_bss_info_changed(): leave
  714. [ 18.323893@1] Disable IEEE80211_CONF_PS ps_aid=0
  715. [ 18.324400@1] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  716. [ 18.421749@0] --------------ssv6200_sw_scan_start():
  717. [ 18.597522@0] libphy: stmmac-0:08 - Link is Up - 100/Full
  718. [ 18.646301@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  719. [ 18.646316@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  720. [ 18.646328@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  721. [ 18.646338@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  722. [ 18.646363@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  723. [ 18.646369@0] _do_rx(): IF_RECV() retruns -84 (dlen=257)
  724. [ 18.748722@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  725. [ 18.748739@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  726. [ 18.748748@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  727. [ 18.748760@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  728. [ 18.748782@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  729. [ 18.748788@0] _do_rx(): IF_RECV() retruns -84 (dlen=257)
  730. [ 19.421521@1] ==============ssv6200_sw_scan_complete():
  731. [ 19.515664@2] codec:vdec_create instance ffffff80018cd000, total 1
  732. [ 20.311231@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
  733. [ 20.311306@0] aml_spdif_dai: share the same clock
  734. [ 20.311318@0] aml_audio_hw: IEC958 PCM32
  735. [ 20.311326@0] hdmitx: audio: aout notify rate 44100
  736. [ 20.311331@0] hdmitx: audio: aout notify size 32
  737. [ 20.311336@0] hdmitx: audio: aout notify format CT_PCM
  738. [ 20.311341@0] hdmtix: set audio
  739. [ 20.311361@0] hdmitx tx_aud_src = 0
  740. [ 20.311391@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
  741. [ 20.311396@0] hdmitx aud_n_para = 6272
  742. [ 20.311415@0] hdmitx set channel status
  743. [ 20.311477@0] hdmitx: audio: Audio Type: PCM
  744. [ 20.311482@0] hdmitx: audio: set audio param
  745. [ 20.311493@0] aml_snd_m8_card aml_m8_snd.48: i2s/958 same source
  746. [ 20.311906@1] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
  747. [ 20.311914@1] aml_spdif_dai: share the same clock
  748. [ 20.311924@1] aml_audio_hw: IEC958 PCM32
  749. [ 20.311931@1] hdmitx: audio: aout notify rate 44100
  750. [ 20.311935@1] hdmitx: audio: aout notify size 32
  751. [ 20.311940@1] hdmitx: audio: no update
  752. [ 20.311949@1] aml_snd_m8_card aml_m8_snd.48: i2s/958 same source
  753. [ 20.312101@1] channel count should be 8, we got 2 aborting
  754. [ 20.427982@2] vout_serve: vmode set to null
  755. [ 20.428045@2] hdmitx: video: vinfo: 1080p60hz 60 1
  756. [ 20.428058@2] hdmitx: video: vinfo recalc: 1080p60hz 60 1
  757. [ 20.428066@2] fb: osd current vmode=1080p60hz, cmd: 0x50000
  758. [ 20.428080@2] tv_vout: tv_set_current_vmode[919]fps_target_mode=59
  759. [ 20.428091@2] tv_vout: mode is 59,sync_duration_den=1,sync_duration_num=60
  760. [ 20.428114@2] tv_vout: 3tvinfo 58 not find
  761. [ 20.428121@2] tv_vout: new mode =null set ok
  762. [ 20.428128@2] vout_serve: vinfo mode is: null
  763. [ 20.428135@2] vout_serve: new mode null set ok
  764. [ 20.428154@2] hdmitx: edid: not find mapped vic
  765. [ 20.428169@2] hdmitx: video: auto - get current mode: null vmode_e 59
  766. [ 20.428178@2] hdmitx: stream colourdepth was 8 in para 0x01b4a978 (1920x1080p60hz)
  767. [ 20.428187@2] hdmitx: update physcial size: 510 290
  768. [ 20.428194@2] hdmitx: video: null not valid hdmi mode
  769. [ 20.428233@2] fb: osd current vmode=null, cmd: 0x10000
  770. [ 20.436382@2] hdmitx: set frac_rate_policy as 0
  771. [ 20.436433@2] vout_serve: vmode set to 1080p60hz
  772. [ 20.436466@2] vout_serve: disable HDMI PHY as soon as possible
  773. [ 20.436478@2] hdmitx: video: vinfo: null 60 1
  774. [ 20.436489@2] hdmitx: video: vinfo recalc: null 60 1
  775. [ 20.436496@2] fb: osd current vmode=null, cmd: 0x50000
  776. [ 20.436507@2] tv_vout: tv_set_current_vmode[919]fps_target_mode=16
  777. [ 20.436517@2] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60
  778. [ 20.436538@2] tv_vout: TV mode 1080p60hz selected.
  779. [ 20.436548@2]
  780. [ 20.436548@2] vdac_enable: on:0,module_sel:8
  781. [ 20.436566@2]
  782. [ 20.436566@2] vdac_enable: on:0,module_sel:8
  783. [ 20.436581@2] tv_vout: new mode =1080p60hz set ok
  784. [ 20.436588@2] vout_serve: vinfo mode is: 1080p60hz
  785. [ 20.436595@2] vout_serve: new mode 1080p60hz set ok
  786. [ 20.436624@2] hdmitx: video: auto - get current mode: 1080p60hz vmode_e 16
  787. [ 20.436633@2] hdmitx: stream colourdepth was 8 in para 0x01b49598 (invalid)
  788. [ 20.436641@2] hdmitx: update rx hdr info 0
  789. [ 20.436648@2] hdmitx: update physcial size: 510 290
  790. [ 20.436671@2] hdmitx: hdev->para now = para at 0x01b4a978
  791. [ 20.436681@2] hdmitx: Stream colourdepth is 8 in para 0x01b4a978 (1920x1080p60hz - VIC: 16)
  792. [ 20.436731@2] hdmitx: video: vinfo: 1080p60hz 60 1
  793. [ 20.436740@2] hdmitx: video: vinfo recalc: 1080p60hz 60 1
  794. [ 20.436754@2] hdmitx: system: already init VIC = 0 Now VIC = 16
  795. [ 20.436762@2] hdmitx: system: params found at 0x01b486f0
  796. [ 20.436771@2] hdmitx: system: cur_param = param at 0x01b486f0 colourdepth 8 colourspace 0
  797. [ 20.436783@2] hdmitx: video: pixel freq 148500, tmds clock 148500, MaxClock1 150000, HF_IEEEOUI 0x000000, MaxClock2 0
  798. [ 20.436792@2] hdmitx: rx no SCDC present indicator
  799. [ 20.438810@2] hdmitx: ddc rd8b error 0x54 0x01
  800. [ 20.439041@0] hdmitx: system: irq 80000001
  801. [ 20.439114@0] Start = 0x10000100 End = 0x100001ff
  802. [ 20.439139@0] [0x10000104]: 0x00000001
  803. [ 20.439149@0] [0x10000105]: 0x00000003
  804. [ 20.439383@0] [0x10000170]: 0x00000004
  805. [ 20.439424@0] [0x10000180]: 0x000000ff
  806. [ 20.439433@0] [0x10000181]: 0x000000ff
  807. [ 20.439442@0] [0x10000182]: 0x00000003
  808. [ 20.439451@0] [0x10000183]: 0x00000007
  809. [ 20.439460@0] [0x10000184]: 0x0000003f
  810. [ 20.439469@0] [0x10000185]: 0x00000002
  811. [ 20.439480@0] [0x10000187]: 0x000000ff
  812. [ 20.439489@0] [0x10000188]: 0x00000003
  813. [ 20.440832@2] hdmitx: ddc rd8b error 0x54 0x01
  814. [ 20.440850@2] hdmirx version is 1.4 or below
  815. [ 20.440858@2] hdmitx div40: 0
  816. [ 20.470632@2] hdmitx: system: set pll
  817. [ 20.470646@2] hdmitx: system: param->VIC:16
  818. [ 20.470656@2] hdmitx: set clk: VIC = 16 cd = 4 cs = 2 frac_rate = 0
  819. [ 20.470665@2] config HPLL = 2970000
  820. [ 20.470688@2] HPLL: 0xc000027b
  821. [ 20.470691@2] config HPLL done
  822. [ 20.470701@2] set_hpll_od3_clk_div[442] div = 6
  823. [ 20.470711@2] j = 4 vid_clk_div = 1
  824. [ 20.470722@2] hdmitx: set enc for VIC: 16
  825. [ 20.470742@2] hdmitx_set_hw[4905] set VIC = 16
  826. [ 20.470747@0] hdmitx: system: irq 80000001
  827. [ 20.470796@2] Set rgb_ycc to 2
  828. [ 20.470802@0] Start = 0x10000100 End = 0x100001ff
  829. [ 20.470820@0] [0x10000104]: 0x00000001
  830. [ 20.471093@0] [0x10000170]: 0x00000053
  831. [ 20.471136@0] [0x10000180]: 0x000000ff
  832. [ 20.471142@0] [0x10000181]: 0x000000ff
  833. [ 20.471149@0] hdmitx: system: irq 80000001
  834. [ 20.471166@0] [0x10000182]: 0x00000003
  835. [ 20.471176@0] [0x10000183]: 0x00000007
  836. [ 20.471182@0] [0x10000184]: 0x0000003f
  837. [ 20.471187@0] [0x10000185]: 0x00000002
  838. [ 20.471195@0] [0x10000187]: 0x000000ff
  839. [ 20.471200@0] [0x10000188]: 0x00000003
  840. [ 20.471385@0] Start = 0x10000100 End = 0x100001ff
  841. [ 20.471398@0] [0x10000104]: 0x00000001
  842. [ 20.471582@0] [0x10000180]: 0x000000ff
  843. [ 20.471587@0] [0x10000181]: 0x000000ff
  844. [ 20.471592@0] [0x10000182]: 0x00000003
  845. [ 20.471598@0] [0x10000183]: 0x00000007
  846. [ 20.471603@0] [0x10000184]: 0x0000003f
  847. [ 20.471608@0] [0x10000185]: 0x00000002
  848. [ 20.471615@0] [0x10000187]: 0x000000ff
  849. [ 20.471621@0] [0x10000188]: 0x00000003
  850. [ 20.482655@2] hdmitx: ddc w1b error 0x54 0x20 0x00
  851. [ 20.484672@2] hdmitx: ddc w1b error 0x54 0x20 0x00
  852. [ 20.486683@2] hdmitx: ddc rd8b error 0x54 0x21
  853. [ 20.602696@2] hdmitx: system: PHY Setting Done
  854. [ 20.606767@2] Sink is HDMI device
  855. [ 20.606806@2] hdmitx: system: packet: can't get vendor data
  856. [ 20.606828@2] hdmtix: set audio
  857. [ 20.606866@2] hdmitx tx_aud_src = 0
  858. [ 20.606959@2] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
  859. [ 20.606980@2] hdmitx aud_n_para = 6272
  860. [ 20.607045@2] hdmitx set channel status
  861. [ 20.607215@2] hdmitx: audio: Audio Type: PCM
  862. [ 20.607246@2] hdmitx: video: VIC: 16 (16) 1920x1080p60hz
  863. [ 20.607288@2] hdmitx: video: Bit depth: 8-bit, Colour range RGB: limited, YCC: limited, Colourspace: YUV444
  864. [ 20.607314@2] hdmitx: video: Colorimetry: bt709
  865. [ 20.607343@2] hdmitx: video: PLL clock: 0xc000027b, Vid clock div 0x000a339c
  866. [ 20.607368@2] fb: osd current vmode=1080p60hz, cmd: 0x10000
  867. [ 20.873614@3] vout_serve: vmode set to null
  868. [ 20.873658@3] vout_serve: disable HDMI PHY as soon as possible
  869. [ 20.873668@3] hdmitx: video: vinfo: 1080p60hz 60 1
  870. [ 20.873676@3] hdmitx: video: vinfo recalc: 1080p60hz 60 1
  871. [ 20.873680@3] fb: osd current vmode=1080p60hz, cmd: 0x50000
  872. [ 20.873689@3] tv_vout: tv_set_current_vmode[919]fps_target_mode=59
  873. [ 20.873696@3] tv_vout: mode is 59,sync_duration_den=1,sync_duration_num=60
  874. [ 20.873713@3] tv_vout: 3tvinfo 58 not find
  875. [ 20.873717@3] tv_vout: new mode =null set ok
  876. [ 20.873722@3] vout_serve: vinfo mode is: null
  877. [ 20.873726@3] vout_serve: new mode null set ok
  878. [ 20.873738@3] hdmitx: edid: not find mapped vic
  879. [ 20.873746@3] hdmitx: video: auto - get current mode: null vmode_e 59
  880. [ 20.873753@3] hdmitx: stream colourdepth was 8 in para 0x01b4a978 (1920x1080p60hz)
  881. [ 20.873758@3] hdmitx: display colourdepth was 8 in cur_param 0x01b486f0 (VIC: 16)
  882. [ 20.873764@3] hdmitx: update physcial size: 510 290
  883. [ 20.873768@3] hdmitx: video: null not valid hdmi mode
  884. [ 20.873795@3] fb: osd current vmode=null, cmd: 0x10000
  885. [ 20.887310@0] hdmitx: set frac_rate_policy as 0
  886. [ 20.887344@0] vout_serve: vmode set to 1080p60hz
  887. [ 20.887371@0] vout_serve: disable HDMI PHY as soon as possible
  888. [ 20.887379@0] hdmitx: video: vinfo: null 60 1
  889. [ 20.887386@0] hdmitx: video: vinfo recalc: null 60 1
  890. [ 20.887391@0] fb: osd current vmode=null, cmd: 0x50000
  891. [ 20.887398@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=16
  892. [ 20.887404@0] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60
  893. [ 20.887418@0] tv_vout: TV mode 1080p60hz selected.
  894. [ 20.887425@0]
  895. [ 20.887425@0] vdac_enable: on:0,module_sel:8
  896. [ 20.887437@0]
  897. [ 20.887437@0] vdac_enable: on:0,module_sel:8
  898. [ 20.887448@0] tv_vout: new mode =1080p60hz set ok
  899. [ 20.887452@0] vout_serve: vinfo mode is: 1080p60hz
  900. [ 20.887456@0] vout_serve: new mode 1080p60hz set ok
  901. [ 20.887476@0] hdmitx: video: auto - get current mode: 1080p60hz vmode_e 16
  902. [ 20.887482@0] hdmitx: stream colourdepth was 8 in para 0x01b49598 (invalid)
  903. [ 20.887487@0] hdmitx: display colourdepth was 8 in cur_param 0x01b486f0 (VIC: 16)
  904. [ 20.887491@0] hdmitx: update rx hdr info 0
  905. [ 20.887495@0] hdmitx: update physcial size: 510 290
  906. [ 20.887511@0] hdmitx: hdev->para now = para at 0x01b4a978
  907. [ 20.887516@0] hdmitx: display colourdepth is 10 in cur_param 0x01b486f0 (VIC: 16)
  908. [ 20.887521@0] Bitdepth is set to 10 bits but display does not support deep colour
  909. [ 20.887527@0] hdmitx: Stream colourdepth is 8 in para 0x01b4a978 (1920x1080p60hz - VIC: 16)
  910. [ 20.887561@0] hdmitx: video: vinfo: 1080p60hz 60 1
  911. [ 20.887566@0] hdmitx: video: vinfo recalc: 1080p60hz 60 1
  912. [ 20.887575@0] hdmitx: system: already init VIC = 0 Now VIC = 16
  913. [ 20.887579@0] hdmitx: system: params found at 0x01b486f0
  914. [ 20.887585@0] hdmitx: system: cur_param = param at 0x01b486f0 colourdepth 8 colourspace 2
  915. [ 20.887592@0] hdmitx: video: pixel freq 148500, tmds clock 148500, MaxClock1 150000, HF_IEEEOUI 0x000000, MaxClock2 0
  916. [ 20.887597@0] hdmitx: rx no SCDC present indicator
  917. [ 20.889609@0] hdmitx: ddc rd8b error 0x54 0x01
  918. [ 20.891625@0] hdmitx: ddc rd8b error 0x54 0x01
  919. [ 20.891637@0] hdmirx version is 1.4 or below
  920. [ 20.891642@0] hdmitx div40: 0
  921. [ 20.920651@1] hdmitx: system: set pll
  922. [ 20.920667@1] hdmitx: system: param->VIC:16
  923. [ 20.920677@1] hdmitx: set clk: VIC = 16 cd = 4 cs = 2 frac_rate = 0
  924. [ 20.920687@1] config HPLL = 2970000
  925. [ 20.920710@1] HPLL: 0xc000027b
  926. [ 20.920713@1] config HPLL done
  927. [ 20.920722@1] set_hpll_od3_clk_div[442] div = 6
  928. [ 20.920732@1] j = 4 vid_clk_div = 1
  929. [ 20.920743@1] hdmitx: set enc for VIC: 16
  930. [ 20.920764@1] hdmitx_set_hw[4905] set VIC = 16
  931. [ 20.920816@1] Set rgb_ycc to 2
  932. [ 20.930856@0] hdmitx: system: irq 80000001
  933. [ 20.930885@0] Start = 0x10000100 End = 0x100001ff
  934. [ 20.930898@0] [0x10000104]: 0x00000001
  935. [ 20.930904@0] [0x10000105]: 0x00000003
  936. [ 20.931080@0] [0x10000170]: 0x00000004
  937. [ 20.931109@0] [0x10000180]: 0x000000ff
  938. [ 20.931114@0] [0x10000181]: 0x000000ff
  939. [ 20.931120@0] [0x10000182]: 0x00000003
  940. [ 20.931125@0] [0x10000183]: 0x00000007
  941. [ 20.931131@0] [0x10000184]: 0x0000003f
  942. [ 20.931136@0] [0x10000185]: 0x00000002
  943. [ 20.931143@0] [0x10000187]: 0x000000ff
  944. [ 20.931148@0] [0x10000188]: 0x00000003
  945. [ 20.932646@1] hdmitx: ddc w1b error 0x54 0x20 0x00
  946. [ 20.932876@0] hdmitx: system: irq 80000001
  947. [ 20.932903@0] Start = 0x10000100 End = 0x100001ff
  948. [ 20.932915@0] [0x10000104]: 0x00000001
  949. [ 20.932921@0] [0x10000105]: 0x00000003
  950. [ 20.933079@0] [0x10000170]: 0x00000004
  951. [ 20.933106@0] [0x10000180]: 0x000000ff
  952. [ 20.933111@0] [0x10000181]: 0x000000ff
  953. [ 20.933117@0] [0x10000182]: 0x00000003
  954. [ 20.933122@0] [0x10000183]: 0x00000007
  955. [ 20.933127@0] [0x10000184]: 0x0000003f
  956. [ 20.933133@0] [0x10000185]: 0x00000002
  957. [ 20.933139@0] [0x10000187]: 0x000000ff
  958. [ 20.933145@0] [0x10000188]: 0x00000003
  959. [ 20.934663@1] hdmitx: ddc w1b error 0x54 0x20 0x00
  960. [ 20.934888@0] hdmitx: system: irq 80000001
  961. [ 20.934913@0] Start = 0x10000100 End = 0x100001ff
  962. [ 20.934925@0] [0x10000104]: 0x00000001
  963. [ 20.934931@0] [0x10000105]: 0x00000003
  964. [ 20.935089@0] [0x10000170]: 0x00000004
  965. [ 20.935116@0] [0x10000180]: 0x000000ff
  966. [ 20.935121@0] [0x10000181]: 0x000000ff
  967. [ 20.935127@0] [0x10000182]: 0x00000003
  968. [ 20.935132@0] [0x10000183]: 0x00000007
  969. [ 20.935137@0] [0x10000184]: 0x0000003f
  970. [ 20.935143@0] [0x10000185]: 0x00000002
  971. [ 20.935150@0] [0x10000187]: 0x000000ff
  972. [ 20.935155@0] [0x10000188]: 0x00000003
  973. [ 20.936675@1] hdmitx: ddc rd8b error 0x54 0x21
  974. [ 21.052653@3] hdmitx: system: PHY Setting Done
  975. [ 21.052684@0] hdmitx: system: irq 80000001
  976. [ 21.052704@0] Start = 0x10000100 End = 0x100001ff
  977. [ 21.052715@0] [0x10000104]: 0x00000001
  978. [ 21.052894@0] [0x10000180]: 0x000000ff
  979. [ 21.052899@0] [0x10000181]: 0x000000ff
  980. [ 21.052905@0] [0x10000182]: 0x00000003
  981. [ 21.052910@0] [0x10000183]: 0x00000007
  982. [ 21.052915@0] [0x10000184]: 0x0000003f
  983. [ 21.052921@0] [0x10000185]: 0x00000002
  984. [ 21.052928@0] [0x10000187]: 0x000000ff
  985. [ 21.052933@0] [0x10000188]: 0x00000003
  986. [ 21.056681@3] Sink is HDMI device
  987. [ 21.056694@3] hdmitx: system: packet: can't get vendor data
  988. [ 21.056700@3] hdmtix: set audio
  989. [ 21.056711@3] hdmitx tx_aud_src = 0
  990. [ 21.056740@3] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
  991. [ 21.056745@3] hdmitx aud_n_para = 6272
  992. [ 21.056765@3] hdmitx set channel status
  993. [ 21.056826@3] hdmitx: audio: Audio Type: PCM
  994. [ 21.056834@3] hdmitx: video: VIC: 16 (16) 1920x1080p60hz
  995. [ 21.056846@3] hdmitx: video: Bit depth: 8-bit, Colour range RGB: limited, YCC: limited, Colourspace: YUV444
  996. [ 21.056853@3] hdmitx: video: Colorimetry: bt709
  997. [ 21.056860@3] hdmitx: video: PLL clock: 0xc000027b, Vid clock div 0x000a339c
  998. [ 21.056869@3] fb: osd current vmode=1080p60hz, cmd: 0x10000
  999. [ 22.026099@1] --------------ssv6200_sw_scan_start():
  1000. [ 22.200791@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ff2008, virqc:bfff
  1001. [ 22.200805@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060bebad8; stop 0, status 4
  1002. [ 22.200816@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1003. [ 22.200827@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1004. [ 22.201590@1] ------------[ cut here ]------------
  1005. [ 22.201625@1] WARNING: CPU: 1 PID: 6 at /home/adamg/CoreELEC/build.CoreELEC-Amlogic.arm-9.0.1/ssv6xxx-aml-1041e7d/hwif/sdio/sdio.c:153 ssv6xxx_sdio_read_reg+0x128/0x148 [ssv6051]()
  1006. [ 22.201631@1] Modules linked in: 8021q ssv6051(O) mac80211 cfg80211 mali(O) ir_lirc_codec lirc_dev ir_mce_kbd_decoder ir_sanyo_decoder ir_rc6_decoder ir_sony_decoder ir_jvc_decoder ir_rc5_decoder ir_nec_decoder meson_ir rc_core wifi_dummy amlvideodri videobuf_res videobuf_core videodev dwc_otg fbcon bitblit softcursor font
  1007. [ 22.201690@1] CPU: 1 PID: 6 Comm: kworker/u8:0 Tainted: G O 3.14.29 #1
  1008. [ 22.201715@1] Workqueue: phy0 ieee80211_scan_work [mac80211]
  1009. [ 22.201719@1] Call trace:
  1010. [ 22.201733@1] [<ffffffc001087ad8>] dump_backtrace+0x0/0x160
  1011. [ 22.201739@1] [<ffffffc001087c58>] show_stack+0x20/0x30
  1012. [ 22.201750@1] [<ffffffc001759088>] dump_stack+0x78/0x94
  1013. [ 22.201759@1] [<ffffffc0010943c8>] warn_slowpath_common+0x90/0xc0
  1014. [ 22.201766@1] [<ffffffc001094528>] warn_slowpath_null+0x38/0x50
  1015. [ 22.201782@1] [<ffffffbffc2463c4>] ssv6xxx_sdio_read_reg+0x124/0x148 [ssv6051]
  1016. [ 22.201793@1] [<ffffffbffc22c27c>] ssv6xxx_hci_txq_pause+0x84/0xd8 [ssv6051]
  1017. [ 22.201804@1] [<ffffffbffc233614>] ssv6200_config+0xdc/0x190 [ssv6051]
  1018. [ 22.201821@1] [<ffffffbffc1a879c>] ieee80211_hw_config+0x194/0x310 [mac80211]
  1019. [ 22.201836@1] [<ffffffbffc1b0340>] ieee80211_scan_work+0x1b8/0x4b0 [mac80211]
  1020. [ 22.201844@1] [<ffffffc0010b0b24>] process_one_work+0x14c/0x460
  1021. [ 22.201850@1] [<ffffffc0010b1c3c>] worker_thread+0x12c/0x420
  1022. [ 22.201858@1] [<ffffffc0010b90e8>] kthread+0xe8/0xf0
  1023. [ 22.201862@1] ---[ end trace ba09877c61448193 ]---
  1024. [ 22.201873@1] SSV6XXX_SDIO sdio:0001:1: sdio read reg from I/O failed (-84)
  1025. [ 22.230311@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  1026. [ 22.230326@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  1027. [ 22.230336@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1028. [ 22.230347@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1029. [ 22.230368@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  1030. [ 22.230374@0] _do_rx(): IF_RECV() retruns -84 (dlen=257)
  1031. [ 22.392921@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  1032. [ 22.392936@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  1033. [ 22.392946@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1034. [ 22.392956@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1035. [ 22.392977@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  1036. [ 22.392983@0] _do_rx(): IF_RECV() retruns -84 (dlen=229)
  1037. [ 22.440786@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ff2008, virqc:bfff
  1038. [ 22.440800@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060bebad8; stop 0, status 4
  1039. [ 22.440811@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1040. [ 22.440822@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1041. [ 22.440835@1] ------------[ cut here ]------------
  1042. [ 22.440865@1] WARNING: CPU: 1 PID: 6 at /home/adamg/CoreELEC/build.CoreELEC-Amlogic.arm-9.0.1/ssv6xxx-aml-1041e7d/hwif/sdio/sdio.c:153 ssv6xxx_sdio_read_reg+0x128/0x148 [ssv6051]()
  1043. [ 22.440870@1] Modules linked in: 8021q ssv6051(O) mac80211 cfg80211 mali(O) ir_lirc_codec lirc_dev ir_mce_kbd_decoder ir_sanyo_decoder ir_rc6_decoder ir_sony_decoder ir_jvc_decoder ir_rc5_decoder ir_nec_decoder meson_ir rc_core wifi_dummy amlvideodri videobuf_res videobuf_core videodev dwc_otg fbcon bitblit softcursor font
  1044. [ 22.440923@1] CPU: 1 PID: 6 Comm: kworker/u8:0 Tainted: G W O 3.14.29 #1
  1045. [ 22.440948@1] Workqueue: phy0 ieee80211_scan_work [mac80211]
  1046. [ 22.440953@1] Call trace:
  1047. [ 22.440967@1] [<ffffffc001087ad8>] dump_backtrace+0x0/0x160
  1048. [ 22.440973@1] [<ffffffc001087c58>] show_stack+0x20/0x30
  1049. [ 22.440984@1] [<ffffffc001759088>] dump_stack+0x78/0x94
  1050. [ 22.440994@1] [<ffffffc0010943c8>] warn_slowpath_common+0x90/0xc0
  1051. [ 22.441001@1] [<ffffffc001094528>] warn_slowpath_null+0x38/0x50
  1052. [ 22.441018@1] [<ffffffbffc2463c4>] ssv6xxx_sdio_read_reg+0x124/0x148 [ssv6051]
  1053. [ 22.441029@1] [<ffffffbffc22c27c>] ssv6xxx_hci_txq_pause+0x84/0xd8 [ssv6051]
  1054. [ 22.441040@1] [<ffffffbffc233614>] ssv6200_config+0xdc/0x190 [ssv6051]
  1055. [ 22.441056@1] [<ffffffbffc1a879c>] ieee80211_hw_config+0x194/0x310 [mac80211]
  1056. [ 22.441071@1] [<ffffffbffc1b0340>] ieee80211_scan_work+0x1b8/0x4b0 [mac80211]
  1057. [ 22.441079@1] [<ffffffc0010b0b24>] process_one_work+0x14c/0x460
  1058. [ 22.441085@1] [<ffffffc0010b1c3c>] worker_thread+0x12c/0x420
  1059. [ 22.441092@1] [<ffffffc0010b90e8>] kthread+0xe8/0xf0
  1060. [ 22.441096@1] ---[ end trace ba09877c61448194 ]---
  1061. [ 22.441108@1] SSV6XXX_SDIO sdio:0001:1: sdio read reg from I/O failed (-84)
  1062. [ 22.495322@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  1063. [ 22.495338@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  1064. [ 22.495348@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1065. [ 22.495358@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1066. [ 22.495378@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  1067. [ 22.495384@0] _do_rx(): IF_RECV() retruns -84 (dlen=229)
  1068. [ 22.791791@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ff2008, virqc:bfff
  1069. [ 22.791806@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060bebad8; stop 0, status 4
  1070. [ 22.791817@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1071. [ 22.791842@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1072. [ 22.791859@2] ------------[ cut here ]------------
  1073. [ 22.791896@2] WARNING: CPU: 2 PID: 6 at /home/adamg/CoreELEC/build.CoreELEC-Amlogic.arm-9.0.1/ssv6xxx-aml-1041e7d/hwif/sdio/sdio.c:153 ssv6xxx_sdio_read_reg+0x128/0x148 [ssv6051]()
  1074. [ 22.791902@2] Modules linked in: 8021q ssv6051(O) mac80211 cfg80211 mali(O) ir_lirc_codec lirc_dev ir_mce_kbd_decoder ir_sanyo_decoder ir_rc6_decoder ir_sony_decoder ir_jvc_decoder ir_rc5_decoder ir_nec_decoder meson_ir rc_core wifi_dummy amlvideodri videobuf_res videobuf_core videodev dwc_otg fbcon bitblit softcursor font
  1075. [ 22.791968@2] CPU: 2 PID: 6 Comm: kworker/u8:0 Tainted: G W O 3.14.29 #1
  1076. [ 22.792000@2] Workqueue: phy0 ieee80211_scan_work [mac80211]
  1077. [ 22.792005@2] Call trace:
  1078. [ 22.792020@2] [<ffffffc001087ad8>] dump_backtrace+0x0/0x160
  1079. [ 22.792027@2] [<ffffffc001087c58>] show_stack+0x20/0x30
  1080. [ 22.792041@2] [<ffffffc001759088>] dump_stack+0x78/0x94
  1081. [ 22.792053@2] [<ffffffc0010943c8>] warn_slowpath_common+0x90/0xc0
  1082. [ 22.792061@2] [<ffffffc001094528>] warn_slowpath_null+0x38/0x50
  1083. [ 22.792080@2] [<ffffffbffc2463c4>] ssv6xxx_sdio_read_reg+0x124/0x148 [ssv6051]
  1084. [ 22.792092@2] [<ffffffbffc22c27c>] ssv6xxx_hci_txq_pause+0x84/0xd8 [ssv6051]
  1085. [ 22.792104@2] [<ffffffbffc233614>] ssv6200_config+0xdc/0x190 [ssv6051]
  1086. [ 22.792134@2] [<ffffffbffc1a879c>] ieee80211_hw_config+0x194/0x310 [mac80211]
  1087. [ 22.792150@2] [<ffffffbffc1b0340>] ieee80211_scan_work+0x1b8/0x4b0 [mac80211]
  1088. [ 22.792160@2] [<ffffffc0010b0b24>] process_one_work+0x14c/0x460
  1089. [ 22.792167@2] [<ffffffc0010b1c3c>] worker_thread+0x12c/0x420
  1090. [ 22.792177@2] [<ffffffc0010b90e8>] kthread+0xe8/0xf0
  1091. [ 22.792184@2] ---[ end trace ba09877c61448195 ]---
  1092. [ 22.792198@2] SSV6XXX_SDIO sdio:0001:1: sdio read reg from I/O failed (-84)
  1093. [ 22.900833@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ff2008, virqc:bfff
  1094. [ 22.900848@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060bebad8; stop 0, status 4
  1095. [ 22.900859@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1096. [ 22.900872@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1097. [ 22.900888@2] ------------[ cut here ]------------
  1098. [ 22.900926@2] WARNING: CPU: 2 PID: 6 at /home/adamg/CoreELEC/build.CoreELEC-Amlogic.arm-9.0.1/ssv6xxx-aml-1041e7d/hwif/sdio/sdio.c:153 ssv6xxx_sdio_read_reg+0x128/0x148 [ssv6051]()
  1099. [ 22.900932@2] Modules linked in: 8021q ssv6051(O) mac80211 cfg80211 mali(O) ir_lirc_codec lirc_dev ir_mce_kbd_decoder ir_sanyo_decoder ir_rc6_decoder ir_sony_decoder ir_jvc_decoder ir_rc5_decoder ir_nec_decoder meson_ir rc_core wifi_dummy amlvideodri videobuf_res videobuf_core videodev dwc_otg fbcon bitblit softcursor font
  1100. [ 22.900990@2] CPU: 2 PID: 6 Comm: kworker/u8:0 Tainted: G W O 3.14.29 #1
  1101. [ 22.901019@2] Workqueue: phy0 ieee80211_scan_work [mac80211]
  1102. [ 22.901024@2] Call trace:
  1103. [ 22.901038@2] [<ffffffc001087ad8>] dump_backtrace+0x0/0x160
  1104. [ 22.901045@2] [<ffffffc001087c58>] show_stack+0x20/0x30
  1105. [ 22.901057@2] [<ffffffc001759088>] dump_stack+0x78/0x94
  1106. [ 22.901067@2] [<ffffffc0010943c8>] warn_slowpath_common+0x90/0xc0
  1107. [ 22.901073@2] [<ffffffc001094528>] warn_slowpath_null+0x38/0x50
  1108. [ 22.901089@2] [<ffffffbffc2463c4>] ssv6xxx_sdio_read_reg+0x124/0x148 [ssv6051]
  1109. [ 22.901100@2] [<ffffffbffc22c27c>] ssv6xxx_hci_txq_pause+0x84/0xd8 [ssv6051]
  1110. [ 22.901112@2] [<ffffffbffc233614>] ssv6200_config+0xdc/0x190 [ssv6051]
  1111. [ 22.901126@2] [<ffffffbffc1a879c>] ieee80211_hw_config+0x194/0x310 [mac80211]
  1112. [ 22.901141@2] [<ffffffbffc1b0340>] ieee80211_scan_work+0x1b8/0x4b0 [mac80211]
  1113. [ 22.901149@2] [<ffffffc0010b0b24>] process_one_work+0x14c/0x460
  1114. [ 22.901155@2] [<ffffffc0010b1c3c>] worker_thread+0x12c/0x420
  1115. [ 22.901164@2] [<ffffffc0010b90e8>] kthread+0xe8/0xf0
  1116. [ 22.901168@2] ---[ end trace ba09877c61448196 ]---
  1117. [ 22.901179@2] SSV6XXX_SDIO sdio:0001:1: sdio read reg from I/O failed (-84)
  1118. [ 23.012975@2] ==============ssv6200_sw_scan_complete():
  1119. [ 23.880892@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  1120. [ 23.880923@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  1121. [ 23.880943@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1122. [ 23.880960@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1123. [ 23.881001@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  1124. [ 23.881007@0] _do_rx(): IF_RECV() retruns -84 (dlen=8)
  1125. [ 27.540643@1] ssv6xxx_watchdog_restart_hw():
  1126. [ 27.540674@1] ieee80211 phy0: Hardware restart was requested
  1127. [ 27.540726@1] SVN version 13940
  1128. [ 27.540730@1] SVN ROOT URL http://192.168.15.30/svn/software/project/release/android/box/aml_s905/6051.Q0.1009.15.e10104/ssv6xxx
  1129. [ 27.540735@1] COMPILER HOST icommsemi
  1130. [ 27.540738@1] COMPILER DATE 12-02-2016-11:51:23
  1131. [ 27.540742@1] COMPILER OS linux
  1132. [ 27.540745@1] COMPILER OS ARCH x86_64-linux-gnu-thread-multi
  1133. [ 27.542857@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ff2008, virqc:bfff
  1134. [ 27.542870@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc06082b968; stop 0, status 4
  1135. [ 27.542881@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1136. [ 27.542897@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1137. [ 27.542910@1] ------------[ cut here ]------------
  1138. [ 27.542939@1] WARNING: CPU: 1 PID: 1209 at /home/adamg/CoreELEC/build.CoreELEC-Amlogic.arm-9.0.1/ssv6xxx-aml-1041e7d/hwif/sdio/sdio.c:153 ssv6xxx_sdio_read_reg+0x128/0x148 [ssv6051]()
  1139. [ 27.542944@1] Modules linked in: 8021q ssv6051(O) mac80211 cfg80211 mali(O) ir_lirc_codec lirc_dev ir_mce_kbd_decoder ir_sanyo_decoder ir_rc6_decoder ir_sony_decoder ir_jvc_decoder ir_rc5_decoder ir_nec_decoder meson_ir rc_core wifi_dummy amlvideodri videobuf_res videobuf_core videodev dwc_otg fbcon bitblit softcursor font
  1140. [ 27.542999@1] CPU: 1 PID: 1209 Comm: kworker/1:1 Tainted: G W O 3.14.29 #1
  1141. [ 27.543024@1] Workqueue: events ieee80211_restart_work [mac80211]
  1142. [ 27.543029@1] Call trace:
  1143. [ 27.543042@1] [<ffffffc001087ad8>] dump_backtrace+0x0/0x160
  1144. [ 27.543048@1] [<ffffffc001087c58>] show_stack+0x20/0x30
  1145. [ 27.543059@1] [<ffffffc001759088>] dump_stack+0x78/0x94
  1146. [ 27.543070@1] [<ffffffc0010943c8>] warn_slowpath_common+0x90/0xc0
  1147. [ 27.543077@1] [<ffffffc001094528>] warn_slowpath_null+0x38/0x50
  1148. [ 27.543093@1] [<ffffffbffc2463c4>] ssv6xxx_sdio_read_reg+0x124/0x148 [ssv6051]
  1149. [ 27.543104@1] [<ffffffbffc22bf04>] ssv6xxx_hci_read_word+0x3c/0x50 [ssv6051]
  1150. [ 27.543117@1] [<ffffffbffc22e414>] ssv6xxx_init_mac+0xec/0xce0 [ssv6051]
  1151. [ 27.543128@1] [<ffffffbffc233700>] ssv6200_start+0x38/0x188 [ssv6051]
  1152. [ 27.543153@1] [<ffffffbffc1d2200>] ieee80211_reconfig+0x250/0x1230 [mac80211]
  1153. [ 27.543167@1] [<ffffffbffc1a77a8>] ieee80211_restart_work+0x48/0x88 [mac80211]
  1154. [ 27.543175@1] [<ffffffc0010b0b24>] process_one_work+0x14c/0x460
  1155. [ 27.543181@1] [<ffffffc0010b1c3c>] worker_thread+0x12c/0x420
  1156. [ 27.543189@1] [<ffffffc0010b90e8>] kthread+0xe8/0xf0
  1157. [ 27.543194@1] ---[ end trace ba09877c61448197 ]---
  1158. [ 27.543205@1] SSV6XXX_SDIO sdio:0001:1: sdio read reg from I/O failed (-84)
  1159. [ 27.543211@1] CHIP TAG: 2014012420140124
  1160. [ 27.543421@1] CHIP ID: RSV6200A0-201311
  1161. [ 27.544066@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 904 (4) at address 80000000.
  1162. [ 27.544143@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80010000.
  1163. [ 27.544213@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80020000.
  1164. [ 27.544281@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80030000.
  1165. [ 27.544349@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80040000.
  1166. [ 27.544416@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80050000.
  1167. [ 27.544483@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80060000.
  1168. [ 27.544549@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80070000.
  1169. [ 27.544615@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 80080000.
  1170. [ 27.544681@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 80090000.
  1171. [ 27.544749@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 800a0000.
  1172. [ 27.544815@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 800b0000.
  1173. [ 27.544883@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 800c0000.
  1174. [ 27.544951@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 800d0000.
  1175. [ 27.545016@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 800e0000.
  1176. [ 27.545080@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 800f0000.
  1177. [ 27.545125@1] [A] ssv6xxx_pbuf_free addr[80080000][8788]
  1178. [ 27.545189@1] [A] ssv6xxx_pbuf_free addr[80090000][8789]
  1179. [ 27.545255@1] [A] ssv6xxx_pbuf_free addr[800a0000][878a]
  1180. [ 27.545318@1] [A] ssv6xxx_pbuf_free addr[800b0000][878b]
  1181. [ 27.545381@1] [A] ssv6xxx_pbuf_free addr[800c0000][878c]
  1182. [ 27.545445@1] [A] ssv6xxx_pbuf_free addr[800d0000][878d]
  1183. [ 27.545469@1] 0x800e0000
  1184. [ 27.545511@1] [A] ssv6xxx_pbuf_free addr[800f0000][878f]
  1185. [ 27.583494@1] ADR_INFO_IDX_ADDR[80000230] ADR_INFO_LEN_ADDR[800002cc]
  1186. [ 27.585740@1] Writing firmware to SSV6XXX...
  1187. [ 27.589969@1] (block_count << 16) = 4f0000,reg =4f0000
  1188. [ 27.590007@1] Firmware "/usr/lib/firmware/ssv6051/ssv6051-sw.bin" loaded
  1189. [ 27.640852@1] Firmware check OK.da0000 = da0000
  1190. [ 27.700685@1] ssv6xxx_set_sdio_clk:set sdio clk 50000000Hz
  1191. [ 27.720728@1] Firmware name sh->cfg.firmware_path=/usr/lib/firmware/ssv6051/ssv6051-sw.bin
  1192. [ 27.720936@1] Firmware version 12978
  1193. [ 27.720943@1] # Do init_cali (iq)
  1194. [ 27.771240@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ff2008, virqc:bfff
  1195. [ 27.771256@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc06082bae8; stop 0, status 4
  1196. [ 27.771269@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1197. [ 27.771297@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1198. [ 27.771311@1] ------------[ cut here ]------------
  1199. [ 27.771347@1] WARNING: CPU: 1 PID: 1209 at /home/adamg/CoreELEC/build.CoreELEC-Amlogic.arm-9.0.1/ssv6xxx-aml-1041e7d/hwif/sdio/sdio.c:153 ssv6xxx_sdio_read_reg+0x128/0x148 [ssv6051]()
  1200. [ 27.771352@1] Modules linked in: 8021q ssv6051(O) mac80211 cfg80211 mali(O) ir_lirc_codec lirc_dev ir_mce_kbd_decoder ir_sanyo_decoder ir_rc6_decoder ir_sony_decoder ir_jvc_decoder ir_rc5_decoder ir_nec_decoder meson_ir rc_core wifi_dummy amlvideodri videobuf_res videobuf_core videodev dwc_otg fbcon bitblit softcursor font
  1201. [ 27.771409@1] CPU: 1 PID: 1209 Comm: kworker/1:1 Tainted: G W O 3.14.29 #1
  1202. [ 27.771437@1] Workqueue: events ieee80211_restart_work [mac80211]
  1203. [ 27.771443@1] Call trace:
  1204. [ 27.771457@1] [<ffffffc001087ad8>] dump_backtrace+0x0/0x160
  1205. [ 27.771463@1] [<ffffffc001087c58>] show_stack+0x20/0x30
  1206. [ 27.771477@1] [<ffffffc001759088>] dump_stack+0x78/0x94
  1207. [ 27.771488@1] [<ffffffc0010943c8>] warn_slowpath_common+0x90/0xc0
  1208. [ 27.771495@1] [<ffffffc001094528>] warn_slowpath_null+0x38/0x50
  1209. [ 27.771512@1] [<ffffffbffc2463c4>] ssv6xxx_sdio_read_reg+0x124/0x148 [ssv6051]
  1210. [ 27.771523@1] [<ffffffbffc22bf04>] ssv6xxx_hci_read_word+0x3c/0x50 [ssv6051]
  1211. [ 27.771535@1] [<ffffffbffc233810>] ssv6200_start+0x148/0x188 [ssv6051]
  1212. [ 27.771557@1] [<ffffffbffc1d2200>] ieee80211_reconfig+0x250/0x1230 [mac80211]
  1213. [ 27.771571@1] [<ffffffbffc1a77a8>] ieee80211_restart_work+0x48/0x88 [mac80211]
  1214. [ 27.771579@1] [<ffffffc0010b0b24>] process_one_work+0x14c/0x460
  1215. [ 27.771586@1] [<ffffffc0010b1c3c>] worker_thread+0x12c/0x420
  1216. [ 27.771593@1] [<ffffffc0010b90e8>] kthread+0xe8/0xf0
  1217. [ 27.771598@1] ---[ end trace ba09877c61448198 ]---
  1218. [ 27.771608@1] SSV6XXX_SDIO sdio:0001:1: sdio read reg from I/O failed (-84)
  1219. [ 27.771706@1] ssv6200_start(): current channel: 1,sc->ps_status=0
  1220. [ 27.773570@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ff2008, virqc:bfff
  1221. [ 27.773583@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc06082bab8; stop 0, status 4
  1222. [ 27.773593@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1223. [ 27.773604@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1224. [ 27.773619@1] ------------[ cut here ]------------
  1225. [ 27.773648@1] WARNING: CPU: 1 PID: 1209 at /home/adamg/CoreELEC/build.CoreELEC-Amlogic.arm-9.0.1/ssv6xxx-aml-1041e7d/hwif/sdio/sdio.c:153 ssv6xxx_sdio_read_reg+0x128/0x148 [ssv6051]()
  1226. [ 27.773652@1] Modules linked in: 8021q ssv6051(O) mac80211 cfg80211 mali(O) ir_lirc_codec lirc_dev ir_mce_kbd_decoder ir_sanyo_decoder ir_rc6_decoder ir_sony_decoder ir_jvc_decoder ir_rc5_decoder ir_nec_decoder meson_ir rc_core wifi_dummy amlvideodri videobuf_res videobuf_core videodev dwc_otg fbcon bitblit softcursor font
  1227. [ 27.773704@1] CPU: 1 PID: 1209 Comm: kworker/1:1 Tainted: G W O 3.14.29 #1
  1228. [ 27.773730@1] Workqueue: events ieee80211_restart_work [mac80211]
  1229. [ 27.773736@1] Call trace:
  1230. [ 27.773751@1] [<ffffffc001087ad8>] dump_backtrace+0x0/0x160
  1231. [ 27.773757@1] [<ffffffc001087c58>] show_stack+0x20/0x30
  1232. [ 27.773769@1] [<ffffffc001759088>] dump_stack+0x78/0x94
  1233. [ 27.773779@1] [<ffffffc0010943c8>] warn_slowpath_common+0x90/0xc0
  1234. [ 27.773786@1] [<ffffffc001094528>] warn_slowpath_null+0x38/0x50
  1235. [ 27.773802@1] [<ffffffbffc2463c4>] ssv6xxx_sdio_read_reg+0x124/0x148 [ssv6051]
  1236. [ 27.773812@1] [<ffffffbffc22bf04>] ssv6xxx_hci_read_word+0x3c/0x50 [ssv6051]
  1237. [ 27.773826@1] [<ffffffbffc23e6e8>] ssv6200_ampdu_init+0x70/0x88 [ssv6051]
  1238. [ 27.773837@1] [<ffffffbffc23379c>] ssv6200_start+0xd4/0x188 [ssv6051]
  1239. [ 27.773864@1] [<ffffffbffc1d2200>] ieee80211_reconfig+0x250/0x1230 [mac80211]
  1240. [ 27.773878@1] [<ffffffbffc1a77a8>] ieee80211_restart_work+0x48/0x88 [mac80211]
  1241. [ 27.773887@1] [<ffffffc0010b0b24>] process_one_work+0x14c/0x460
  1242. [ 27.773893@1] [<ffffffc0010b1c3c>] worker_thread+0x12c/0x420
  1243. [ 27.773901@1] [<ffffffc0010b90e8>] kthread+0xe8/0xf0
  1244. [ 27.773905@1] ---[ end trace ba09877c61448199 ]---
  1245. [ 27.773917@1] SSV6XXX_SDIO sdio:0001:1: sdio read reg from I/O failed (-84)
  1246. [ 27.773972@1] SSV6XXX_SDIO sdio:0001:1: Failed to claim sdio irq: -16
  1247. [ 27.774077@1] [I] ssv6200_add_interface():
  1248. [ 27.774085@1] ssv6xxx_config_vif_res id[1].
  1249. [ 27.774096@1] SSV WLAN driver ssv6200: VIF 3c:cf:5b:c0:88:01 of type 2 is added.
  1250. [ 27.774123@1] SSV WLAN driver ssv6200: Failed to create interface debugfs for 3C-CF-5B-C0-88-01.
  1251. [ 27.774132@1] [I] sv6200_conf_tx vif[1] qos[0] queue[0] aifsn[2] cwmin[15] cwmax[1023] txop[0]
  1252. [ 27.774138@1] SSV WLAN driver ssv6200: WMM setting applicable to primary interface only.
  1253. [ 27.774144@1] [I] sv6200_conf_tx vif[1] qos[0] queue[1] aifsn[2] cwmin[15] cwmax[1023] txop[0]
  1254. [ 27.774149@1] SSV WLAN driver ssv6200: WMM setting applicable to primary interface only.
  1255. [ 27.774155@1] [I] sv6200_conf_tx vif[1] qos[0] queue[2] aifsn[2] cwmin[15] cwmax[1023] txop[0]
  1256. [ 27.774160@1] SSV WLAN driver ssv6200: WMM setting applicable to primary interface only.
  1257. [ 27.774165@1] [I] sv6200_conf_tx vif[1] qos[0] queue[3] aifsn[2] cwmin[15] cwmax[1023] txop[0]
  1258. [ 27.774170@1] SSV WLAN driver ssv6200: WMM setting applicable to primary interface only.
  1259. [ 27.774179@1] Disable IEEE80211_CONF_PS ps_aid=0
  1260. [ 27.774189@1] BSS Changed use_short_preamble[0]
  1261. [ 27.774193@1] BSS_CHANGED_HT: Untreated!!
  1262. [ 27.774196@1] ssv6xxx_rc_update_basic_rate!!
  1263. [ 27.774517@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ff2008, virqc:bfff
  1264. [ 27.774524@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc06082ba38; stop 0, status 4
  1265. [ 27.774529@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1266. [ 27.774541@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1267. [ 27.774552@1] ------------[ cut here ]------------
  1268. [ 27.774586@1] WARNING: CPU: 1 PID: 1209 at /home/adamg/CoreELEC/build.CoreELEC-Amlogic.arm-9.0.1/ssv6xxx-aml-1041e7d/hwif/sdio/sdio.c:153 ssv6xxx_sdio_read_reg+0x128/0x148 [ssv6051]()
  1269. [ 27.774590@1] Modules linked in: 8021q ssv6051(O) mac80211 cfg80211 mali(O) ir_lirc_codec lirc_dev ir_mce_kbd_decoder ir_sanyo_decoder ir_rc6_decoder ir_sony_decoder ir_jvc_decoder ir_rc5_decoder ir_nec_decoder meson_ir rc_core wifi_dummy amlvideodri videobuf_res videobuf_core videodev dwc_otg fbcon bitblit softcursor font
  1270. [ 27.774645@1] CPU: 1 PID: 1209 Comm: kworker/1:1 Tainted: G W O 3.14.29 #1
  1271. [ 27.774666@1] Workqueue: events ieee80211_restart_work [mac80211]
  1272. [ 27.774672@1] Call trace:
  1273. [ 27.774685@1] [<ffffffc001087ad8>] dump_backtrace+0x0/0x160
  1274. [ 27.774692@1] [<ffffffc001087c58>] show_stack+0x20/0x30
  1275. [ 27.774705@1] [<ffffffc001759088>] dump_stack+0x78/0x94
  1276. [ 27.774717@1] [<ffffffc0010943c8>] warn_slowpath_common+0x90/0xc0
  1277. [ 27.774724@1] [<ffffffc001094528>] warn_slowpath_null+0x38/0x50
  1278. [ 27.774742@1] [<ffffffbffc2463c4>] ssv6xxx_sdio_read_reg+0x124/0x148 [ssv6051]
  1279. [ 27.774752@1] [<ffffffbffc22bf04>] ssv6xxx_hci_read_word+0x3c/0x50 [ssv6051]
  1280. [ 27.774766@1] [<ffffffbffc23aad4>] ssv6xxx_rc_update_bmode_ctrl_rate+0x8c/0xe8 [ssv6051]
  1281. [ 27.774779@1] [<ffffffbffc23ab84>] ssv6xxx_rc_update_basic_rate+0x54/0x78 [ssv6051]
  1282. [ 27.774790@1] [<ffffffbffc232164>] ssv6200_bss_info_changed+0x294/0x308 [ssv6051]
  1283. [ 27.774807@1] [<ffffffbffc1a89c4>] ieee80211_bss_info_change_notify+0xac/0x1b8 [mac80211]
  1284. [ 27.774829@1] [<ffffffbffc1d2730>] ieee80211_reconfig+0x780/0x1230 [mac80211]
  1285. [ 27.774842@1] [<ffffffbffc1a77a8>] ieee80211_restart_work+0x48/0x88 [mac80211]
  1286. [ 27.774849@1] [<ffffffc0010b0b24>] process_one_work+0x14c/0x460
  1287. [ 27.774856@1] [<ffffffc0010b1c3c>] worker_thread+0x12c/0x420
  1288. [ 27.774867@1] [<ffffffc0010b90e8>] kthread+0xe8/0xf0
  1289. [ 27.774872@1] ---[ end trace ba09877c6144819a ]---
  1290. [ 27.774882@1] SSV6XXX_SDIO sdio:0001:1: sdio read reg from I/O failed (-84)
  1291. [ 27.774887@1] ERROR!!Please check interface!
  1292. [ 27.774891@1] [0x80000240]: 0x00a20000!=0x01020000
  1293. [ 27.774894@1] SOS!SOS!
  1294. [ 27.775187@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ff2008, virqc:bfff
  1295. [ 27.775198@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc06082ba38; stop 0, status 4
  1296. [ 27.775205@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1297. [ 27.775214@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1298. [ 27.775224@1] ------------[ cut here ]------------
  1299. [ 27.775247@1] WARNING: CPU: 1 PID: 1209 at /home/adamg/CoreELEC/build.CoreELEC-Amlogic.arm-9.0.1/ssv6xxx-aml-1041e7d/hwif/sdio/sdio.c:153 ssv6xxx_sdio_read_reg+0x128/0x148 [ssv6051]()
  1300. [ 27.775252@1] Modules linked in: 8021q ssv6051(O) mac80211 cfg80211 mali(O) ir_lirc_codec lirc_dev ir_mce_kbd_decoder ir_sanyo_decoder ir_rc6_decoder ir_sony_decoder ir_jvc_decoder ir_rc5_decoder ir_nec_decoder meson_ir rc_core wifi_dummy amlvideodri videobuf_res videobuf_core videodev dwc_otg fbcon bitblit softcursor font
  1301. [ 27.775303@1] CPU: 1 PID: 1209 Comm: kworker/1:1 Tainted: G W O 3.14.29 #1
  1302. [ 27.775320@1] Workqueue: events ieee80211_restart_work [mac80211]
  1303. [ 27.775324@1] Call trace:
  1304. [ 27.775334@1] [<ffffffc001087ad8>] dump_backtrace+0x0/0x160
  1305. [ 27.775341@1] [<ffffffc001087c58>] show_stack+0x20/0x30
  1306. [ 27.775352@1] [<ffffffc001759088>] dump_stack+0x78/0x94
  1307. [ 27.775361@1] [<ffffffc0010943c8>] warn_slowpath_common+0x90/0xc0
  1308. [ 27.775368@1] [<ffffffc001094528>] warn_slowpath_null+0x38/0x50
  1309. [ 27.775382@1] [<ffffffbffc2463c4>] ssv6xxx_sdio_read_reg+0x124/0x148 [ssv6051]
  1310. [ 27.775393@1] [<ffffffbffc22bf04>] ssv6xxx_hci_read_word+0x3c/0x50 [ssv6051]
  1311. [ 27.775407@1] [<ffffffbffc23aaa0>] ssv6xxx_rc_update_bmode_ctrl_rate+0x58/0xe8 [ssv6051]
  1312. [ 27.775419@1] [<ffffffbffc23ab70>] ssv6xxx_rc_update_basic_rate+0x40/0x78 [ssv6051]
  1313. [ 27.775430@1] [<ffffffbffc232164>] ssv6200_bss_info_changed+0x294/0x308 [ssv6051]
  1314. [ 27.775445@1] [<ffffffbffc1a89c4>] ieee80211_bss_info_change_notify+0xac/0x1b8 [mac80211]
  1315. [ 27.775466@1] [<ffffffbffc1d2730>] ieee80211_reconfig+0x780/0x1230 [mac80211]
  1316. [ 27.775480@1] [<ffffffbffc1a77a8>] ieee80211_restart_work+0x48/0x88 [mac80211]
  1317. [ 27.775487@1] [<ffffffc0010b0b24>] process_one_work+0x14c/0x460
  1318. [ 27.775493@1] [<ffffffc0010b1c3c>] worker_thread+0x12c/0x420
  1319. [ 27.775500@1] [<ffffffc0010b90e8>] kthread+0xe8/0xf0
  1320. [ 27.775504@1] ---[ end trace ba09877c6144819b ]---
  1321. [ 27.775514@1] SSV6XXX_SDIO sdio:0001:1: sdio read reg from I/O failed (-84)
  1322. [ 27.775701@1] NL80211_IFTYPE_STATION!!
  1323. [ 27.775708@1] [I] ssv6200_bss_info_changed(): leave
  1324. [ 30.380056@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  1325. [ 30.380079@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  1326. [ 30.380100@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1327. [ 30.380122@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1328. [ 30.380174@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  1329. [ 30.380188@0] _do_rx(): IF_RECV() retruns -84 (dlen=229)
  1330. [ 31.023881@1] --------------ssv6200_sw_scan_start():
  1331. [ 31.200696@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ff2008, virqc:bfff
  1332. [ 31.200711@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b93ad8; stop 0, status 4
  1333. [ 31.200721@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1334. [ 31.200732@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1335. [ 31.200744@3] ------------[ cut here ]------------
  1336. [ 31.200775@3] WARNING: CPU: 3 PID: 25 at /home/adamg/CoreELEC/build.CoreELEC-Amlogic.arm-9.0.1/ssv6xxx-aml-1041e7d/hwif/sdio/sdio.c:153 ssv6xxx_sdio_read_reg+0x128/0x148 [ssv6051]()
  1337. [ 31.200780@3] Modules linked in: 8021q ssv6051(O) mac80211 cfg80211 mali(O) ir_lirc_codec lirc_dev ir_mce_kbd_decoder ir_sanyo_decoder ir_rc6_decoder ir_sony_decoder ir_jvc_decoder ir_rc5_decoder ir_nec_decoder meson_ir rc_core wifi_dummy amlvideodri videobuf_res videobuf_core videodev dwc_otg fbcon bitblit softcursor font
  1338. [ 31.200836@3] CPU: 3 PID: 25 Comm: kworker/u8:1 Tainted: G W O 3.14.29 #1
  1339. [ 31.200862@3] Workqueue: phy0 ieee80211_scan_work [mac80211]
  1340. [ 31.200867@3] Call trace:
  1341. [ 31.200880@3] [<ffffffc001087ad8>] dump_backtrace+0x0/0x160
  1342. [ 31.200886@3] [<ffffffc001087c58>] show_stack+0x20/0x30
  1343. [ 31.200898@3] [<ffffffc001759088>] dump_stack+0x78/0x94
  1344. [ 31.200907@3] [<ffffffc0010943c8>] warn_slowpath_common+0x90/0xc0
  1345. [ 31.200914@3] [<ffffffc001094528>] warn_slowpath_null+0x38/0x50
  1346. [ 31.200929@3] [<ffffffbffc2463c4>] ssv6xxx_sdio_read_reg+0x124/0x148 [ssv6051]
  1347. [ 31.200940@3] [<ffffffbffc22c27c>] ssv6xxx_hci_txq_pause+0x84/0xd8 [ssv6051]
  1348. [ 31.200952@3] [<ffffffbffc233614>] ssv6200_config+0xdc/0x190 [ssv6051]
  1349. [ 31.200967@3] [<ffffffbffc1a879c>] ieee80211_hw_config+0x194/0x310 [mac80211]
  1350. [ 31.200982@3] [<ffffffbffc1b0340>] ieee80211_scan_work+0x1b8/0x4b0 [mac80211]
  1351. [ 31.200990@3] [<ffffffc0010b0b24>] process_one_work+0x14c/0x460
  1352. [ 31.200996@3] [<ffffffc0010b1c3c>] worker_thread+0x12c/0x420
  1353. [ 31.201007@3] [<ffffffc0010b90e8>] kthread+0xe8/0xf0
  1354. [ 31.201011@3] ---[ end trace ba09877c6144819c ]---
  1355. [ 31.201022@3] SSV6XXX_SDIO sdio:0001:1: sdio read reg from I/O failed (-84)
  1356. [ 31.243327@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  1357. [ 31.243342@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  1358. [ 31.243352@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1359. [ 31.243362@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1360. [ 31.243383@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  1361. [ 31.243390@0] _do_rx(): IF_RECV() retruns -84 (dlen=257)
  1362. [ 31.303387@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  1363. [ 31.303402@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  1364. [ 31.303413@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1365. [ 31.303423@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1366. [ 31.303443@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  1367. [ 31.303448@0] _do_rx(): IF_RECV() retruns -84 (dlen=229)
  1368. [ 31.343818@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  1369. [ 31.343833@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  1370. [ 31.343843@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1371. [ 31.343854@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1372. [ 31.343874@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  1373. [ 31.343880@0] _do_rx(): IF_RECV() retruns -84 (dlen=257)
  1374. [ 31.344647@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  1375. [ 31.344653@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  1376. [ 31.344659@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1377. [ 31.344669@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1378. [ 31.344683@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  1379. [ 31.344688@0] _do_rx(): IF_RECV() retruns -84 (dlen=116)
  1380. [ 31.446195@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  1381. [ 31.446211@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  1382. [ 31.446221@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1383. [ 31.446232@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1384. [ 31.446254@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  1385. [ 31.446260@0] _do_rx(): IF_RECV() retruns -84 (dlen=257)
  1386. [ 31.506293@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  1387. [ 31.506309@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  1388. [ 31.506320@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1389. [ 31.506330@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1390. [ 31.506350@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  1391. [ 31.506356@0] _do_rx(): IF_RECV() retruns -84 (dlen=229)
  1392. [ 31.790764@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ff2008, virqc:bfff
  1393. [ 31.790778@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b93ad8; stop 0, status 4
  1394. [ 31.790788@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1395. [ 31.790798@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1396. [ 31.790812@3] ------------[ cut here ]------------
  1397. [ 31.790841@3] WARNING: CPU: 3 PID: 25 at /home/adamg/CoreELEC/build.CoreELEC-Amlogic.arm-9.0.1/ssv6xxx-aml-1041e7d/hwif/sdio/sdio.c:153 ssv6xxx_sdio_read_reg+0x128/0x148 [ssv6051]()
  1398. [ 31.790846@3] Modules linked in: 8021q ssv6051(O) mac80211 cfg80211 mali(O) ir_lirc_codec lirc_dev ir_mce_kbd_decoder ir_sanyo_decoder ir_rc6_decoder ir_sony_decoder ir_jvc_decoder ir_rc5_decoder ir_nec_decoder meson_ir rc_core wifi_dummy amlvideodri videobuf_res videobuf_core videodev dwc_otg fbcon bitblit softcursor font
  1399. [ 31.790903@3] CPU: 3 PID: 25 Comm: kworker/u8:1 Tainted: G W O 3.14.29 #1
  1400. [ 31.790927@3] Workqueue: phy0 ieee80211_scan_work [mac80211]
  1401. [ 31.790932@3] Call trace:
  1402. [ 31.790944@3] [<ffffffc001087ad8>] dump_backtrace+0x0/0x160
  1403. [ 31.790951@3] [<ffffffc001087c58>] show_stack+0x20/0x30
  1404. [ 31.790963@3] [<ffffffc001759088>] dump_stack+0x78/0x94
  1405. [ 31.790972@3] [<ffffffc0010943c8>] warn_slowpath_common+0x90/0xc0
  1406. [ 31.790980@3] [<ffffffc001094528>] warn_slowpath_null+0x38/0x50
  1407. [ 31.790994@3] [<ffffffbffc2463c4>] ssv6xxx_sdio_read_reg+0x124/0x148 [ssv6051]
  1408. [ 31.791005@3] [<ffffffbffc22c27c>] ssv6xxx_hci_txq_pause+0x84/0xd8 [ssv6051]
  1409. [ 31.791017@3] [<ffffffbffc233614>] ssv6200_config+0xdc/0x190 [ssv6051]
  1410. [ 31.791031@3] [<ffffffbffc1a879c>] ieee80211_hw_config+0x194/0x310 [mac80211]
  1411. [ 31.791046@3] [<ffffffbffc1b0340>] ieee80211_scan_work+0x1b8/0x4b0 [mac80211]
  1412. [ 31.791054@3] [<ffffffc0010b0b24>] process_one_work+0x14c/0x460
  1413. [ 31.791060@3] [<ffffffc0010b1c3c>] worker_thread+0x12c/0x420
  1414. [ 31.791068@3] [<ffffffc0010b90e8>] kthread+0xe8/0xf0
  1415. [ 31.791072@3] ---[ end trace ba09877c6144819d ]---
  1416. [ 31.791083@3] SSV6XXX_SDIO sdio:0001:1: sdio read reg from I/O failed (-84)
  1417. [ 32.012643@3] ==============ssv6200_sw_scan_complete():
  1418. [ 32.120781@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  1419. [ 32.120795@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  1420. [ 32.120804@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1421. [ 32.120815@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1422. [ 32.120835@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  1423. [ 32.120841@0] _do_rx(): IF_RECV() retruns -84 (dlen=229)
  1424. [ 33.330572@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  1425. [ 33.330588@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  1426. [ 33.330599@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1427. [ 33.330636@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1428. [ 33.330670@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  1429. [ 33.330677@0] _do_rx(): IF_RECV() retruns -84 (dlen=8)
  1430. [ 37.560628@1] ssv6xxx_watchdog_restart_hw():
  1431. [ 37.560711@1] ieee80211 phy0: Hardware restart was requested
  1432. [ 37.560879@1] SVN version 13940
  1433. [ 37.560956@1] SVN ROOT URL http://192.168.15.30/svn/software/project/release/android/box/aml_s905/6051.Q0.1009.15.e10104/ssv6xxx
  1434. [ 37.561021@1] COMPILER HOST icommsemi
  1435. [ 37.561080@1] COMPILER DATE 12-02-2016-11:51:23
  1436. [ 37.561139@1] COMPILER OS linux
  1437. [ 37.561177@1] COMPILER OS ARCH x86_64-linux-gnu-thread-multi
  1438. [ 37.561469@1] CHIP TAG: 2014012420010960
  1439. [ 37.561776@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ff2008, virqc:bfff
  1440. [ 37.561812@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc06082b968; stop 0, status 4
  1441. [ 37.561851@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1442. [ 37.561886@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1443. [ 37.561935@1] ------------[ cut here ]------------
  1444. [ 37.562011@1] WARNING: CPU: 1 PID: 1209 at /home/adamg/CoreELEC/build.CoreELEC-Amlogic.arm-9.0.1/ssv6xxx-aml-1041e7d/hwif/sdio/sdio.c:153 ssv6xxx_sdio_read_reg+0x128/0x148 [ssv6051]()
  1445. [ 37.562042@1] Modules linked in: 8021q ssv6051(O) mac80211 cfg80211 mali(O) ir_lirc_codec lirc_dev ir_mce_kbd_decoder ir_sanyo_decoder ir_rc6_decoder ir_sony_decoder ir_jvc_decoder ir_rc5_decoder ir_nec_decoder meson_ir rc_core wifi_dummy amlvideodri videobuf_res videobuf_core videodev dwc_otg fbcon bitblit softcursor font
  1446. [ 37.562606@1] CPU: 1 PID: 1209 Comm: kworker/1:1 Tainted: G W O 3.14.29 #1
  1447. [ 37.562664@1] Workqueue: events ieee80211_restart_work [mac80211]
  1448. [ 37.562723@1] Call trace:
  1449. [ 37.562769@1] [<ffffffc001087ad8>] dump_backtrace+0x0/0x160
  1450. [ 37.562812@1] [<ffffffc001087c58>] show_stack+0x20/0x30
  1451. [ 37.562854@1] [<ffffffc001759088>] dump_stack+0x78/0x94
  1452. [ 37.562896@1] [<ffffffc0010943c8>] warn_slowpath_common+0x90/0xc0
  1453. [ 37.562928@1] [<ffffffc001094528>] warn_slowpath_null+0x38/0x50
  1454. [ 37.562983@1] [<ffffffbffc2463c4>] ssv6xxx_sdio_read_reg+0x124/0x148 [ssv6051]
  1455. [ 37.563033@1] [<ffffffbffc22bf04>] ssv6xxx_hci_read_word+0x3c/0x50 [ssv6051]
  1456. [ 37.563084@1] [<ffffffbffc22e490>] ssv6xxx_init_mac+0x168/0xce0 [ssv6051]
  1457. [ 37.563128@1] [<ffffffbffc233700>] ssv6200_start+0x38/0x188 [ssv6051]
  1458. [ 37.563194@1] [<ffffffbffc1d2200>] ieee80211_reconfig+0x250/0x1230 [mac80211]
  1459. [ 37.563248@1] [<ffffffbffc1a77a8>] ieee80211_restart_work+0x48/0x88 [mac80211]
  1460. [ 37.563286@1] [<ffffffc0010b0b24>] process_one_work+0x14c/0x460
  1461. [ 37.563322@1] [<ffffffc0010b1c3c>] worker_thread+0x12c/0x420
  1462. [ 37.563349@1] [<ffffffc0010b90e8>] kthread+0xe8/0xf0
  1463. [ 37.563381@1] ---[ end trace ba09877c6144819e ]---
  1464. [ 37.563420@1] SSV6XXX_SDIO sdio:0001:1: sdio read reg from I/O failed (-84)
  1465. [ 37.563523@1] CHIP ID: RSV6200A200A1311
  1466. [ 37.564692@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 904 (4) at address 80000000.
  1467. [ 37.564842@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80010000.
  1468. [ 37.564988@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80020000.
  1469. [ 37.565133@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80030000.
  1470. [ 37.565286@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80040000.
  1471. [ 37.565441@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80050000.
  1472. [ 37.565595@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80060000.
  1473. [ 37.565760@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 560 (3) at address 80070000.
  1474. [ 37.565913@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 80080000.
  1475. [ 37.566058@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 80090000.
  1476. [ 37.566202@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 800a0000.
  1477. [ 37.566356@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 800b0000.
  1478. [ 37.566502@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 800c0000.
  1479. [ 37.566654@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 800d0000.
  1480. [ 37.566800@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 800e0000.
  1481. [ 37.566947@1] SSV WLAN driver ssv6200: Allocated 0 type packet buffer of size 256 (1) at address 800f0000.
  1482. [ 37.567053@1] [A] ssv6xxx_pbuf_free addr[80080000][8788]
  1483. [ 37.567197@1] [A] ssv6xxx_pbuf_free addr[80090000][8789]
  1484. [ 37.567327@1] [A] ssv6xxx_pbuf_free addr[800a0000][878a]
  1485. [ 37.567467@1] [A] ssv6xxx_pbuf_free addr[800b0000][878b]
  1486. [ 37.567616@1] [A] ssv6xxx_pbuf_free addr[800c0000][878c]
  1487. [ 37.567759@1] [A] ssv6xxx_pbuf_free addr[800d0000][878d]
  1488. [ 37.567828@1] 0x800e0000
  1489. [ 37.567931@1] [A] ssv6xxx_pbuf_free addr[800f0000][878f]
  1490. [ 37.618648@1] ADR_INFO_IDX_ADDR[80000230] ADR_INFO_LEN_ADDR[800002cc]
  1491. [ 37.622825@1] Writing firmware to SSV6XXX...
  1492. [ 37.627561@1] (block_count << 16) = 4f0000,reg =4f0000
  1493. [ 37.627625@1] Firmware "/usr/lib/firmware/ssv6051/ssv6051-sw.bin" loaded
  1494. [ 37.680706@1] Firmware check OK.da0000 = da0000
  1495. [ 37.740606@1] ssv6xxx_set_sdio_clk:set sdio clk 50000000Hz
  1496. [ 37.760641@1] Firmware name sh->cfg.firmware_path=/usr/lib/firmware/ssv6051/ssv6051-sw.bin
  1497. [ 37.760926@1] Firmware version 12978
  1498. [ 37.760939@1] # Do init_cali (iq)
  1499. [ 37.811519@1] ssv6200_start(): current channel: 1,sc->ps_status=0
  1500. [ 37.813750@1] SSV6XXX_SDIO sdio:0001:1: Failed to claim sdio irq: -16
  1501. [ 37.813834@1] [I] ssv6200_add_interface():
  1502. [ 37.813844@1] SSV WLAN driver ssv6200: Add interface of type 2 (p2p: 0) failed.
  1503. [ 37.813854@1] [I] sv6200_conf_tx vif[1] qos[0] queue[0] aifsn[2] cwmin[15] cwmax[1023] txop[0]
  1504. [ 37.813860@1] SSV WLAN driver ssv6200: WMM setting applicable to primary interface only.
  1505. [ 37.813866@1] [I] sv6200_conf_tx vif[1] qos[0] queue[1] aifsn[2] cwmin[15] cwmax[1023] txop[0]
  1506. [ 37.813871@1] SSV WLAN driver ssv6200: WMM setting applicable to primary interface only.
  1507. [ 37.813877@1] [I] sv6200_conf_tx vif[1] qos[0] queue[2] aifsn[2] cwmin[15] cwmax[1023] txop[0]
  1508. [ 37.813882@1] SSV WLAN driver ssv6200: WMM setting applicable to primary interface only.
  1509. [ 37.813888@1] [I] sv6200_conf_tx vif[1] qos[0] queue[3] aifsn[2] cwmin[15] cwmax[1023] txop[0]
  1510. [ 37.813893@1] SSV WLAN driver ssv6200: WMM setting applicable to primary interface only.
  1511. [ 37.813901@1] Disable IEEE80211_CONF_PS ps_aid=0
  1512. [ 37.813911@1] BSS Changed use_short_preamble[0]
  1513. [ 37.813916@1] BSS_CHANGED_HT: Untreated!!
  1514. [ 37.813919@1] ssv6xxx_rc_update_basic_rate!!
  1515. [ 37.814013@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ff2008, virqc:bfff
  1516. [ 37.814020@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc06082ba38; stop 0, status 4
  1517. [ 37.814027@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1518. [ 37.814036@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1519. [ 37.814047@1] ------------[ cut here ]------------
  1520. [ 37.814073@1] WARNING: CPU: 1 PID: 1209 at /home/adamg/CoreELEC/build.CoreELEC-Amlogic.arm-9.0.1/ssv6xxx-aml-1041e7d/hwif/sdio/sdio.c:153 ssv6xxx_sdio_read_reg+0x128/0x148 [ssv6051]()
  1521. [ 37.814078@1] Modules linked in: 8021q ssv6051(O) mac80211 cfg80211 mali(O) ir_lirc_codec lirc_dev ir_mce_kbd_decoder ir_sanyo_decoder ir_rc6_decoder ir_sony_decoder ir_jvc_decoder ir_rc5_decoder ir_nec_decoder meson_ir rc_core wifi_dummy amlvideodri videobuf_res videobuf_core videodev dwc_otg fbcon bitblit softcursor font
  1522. [ 37.814134@1] CPU: 1 PID: 1209 Comm: kworker/1:1 Tainted: G W O 3.14.29 #1
  1523. [ 37.814156@1] Workqueue: events ieee80211_restart_work [mac80211]
  1524. [ 37.814162@1] Call trace:
  1525. [ 37.814174@1] [<ffffffc001087ad8>] dump_backtrace+0x0/0x160
  1526. [ 37.814181@1] [<ffffffc001087c58>] show_stack+0x20/0x30
  1527. [ 37.814192@1] [<ffffffc001759088>] dump_stack+0x78/0x94
  1528. [ 37.814201@1] [<ffffffc0010943c8>] warn_slowpath_common+0x90/0xc0
  1529. [ 37.814208@1] [<ffffffc001094528>] warn_slowpath_null+0x38/0x50
  1530. [ 37.814223@1] [<ffffffbffc2463c4>] ssv6xxx_sdio_read_reg+0x124/0x148 [ssv6051]
  1531. [ 37.814235@1] [<ffffffbffc22bf04>] ssv6xxx_hci_read_word+0x3c/0x50 [ssv6051]
  1532. [ 37.814248@1] [<ffffffbffc23aad4>] ssv6xxx_rc_update_bmode_ctrl_rate+0x8c/0xe8 [ssv6051]
  1533. [ 37.814261@1] [<ffffffbffc23ab70>] ssv6xxx_rc_update_basic_rate+0x40/0x78 [ssv6051]
  1534. [ 37.814273@1] [<ffffffbffc232164>] ssv6200_bss_info_changed+0x294/0x308 [ssv6051]
  1535. [ 37.814287@1] [<ffffffbffc1a89c4>] ieee80211_bss_info_change_notify+0xac/0x1b8 [mac80211]
  1536. [ 37.814310@1] [<ffffffbffc1d2730>] ieee80211_reconfig+0x780/0x1230 [mac80211]
  1537. [ 37.814324@1] [<ffffffbffc1a77a8>] ieee80211_restart_work+0x48/0x88 [mac80211]
  1538. [ 37.814331@1] [<ffffffc0010b0b24>] process_one_work+0x14c/0x460
  1539. [ 37.814337@1] [<ffffffc0010b1c3c>] worker_thread+0x12c/0x420
  1540. [ 37.814346@1] [<ffffffc0010b90e8>] kthread+0xe8/0xf0
  1541. [ 37.814350@1] ---[ end trace ba09877c6144819f ]---
  1542. [ 37.814358@1] SSV6XXX_SDIO sdio:0001:1: sdio read reg from I/O failed (-84)
  1543. [ 37.814362@1] ERROR!!Please check interface!
  1544. [ 37.814367@1] [0x80000230]: 0x013a0000!=0x00000000
  1545. [ 37.814370@1] SOS!SOS!
  1546. [ 37.814933@1] NL80211_IFTYPE_STATION!!
  1547. [ 37.814939@1] [I] ssv6200_bss_info_changed(): leave
  1548. [ 48.245755@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  1549. [ 48.245795@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  1550. [ 48.245827@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1551. [ 48.245870@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1552. [ 48.245939@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  1553. [ 48.245965@0] _do_rx(): IF_RECV() retruns -84 (dlen=110)
  1554. [ 48.278286@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  1555. [ 48.278326@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  1556. [ 48.278356@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1557. [ 48.278401@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1558. [ 48.278468@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  1559. [ 48.278493@0] _do_rx(): IF_RECV() retruns -84 (dlen=115)
  1560. [ 48.310885@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  1561. [ 48.310924@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  1562. [ 48.310956@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1563. [ 48.311000@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1564. [ 48.311068@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  1565. [ 48.311092@0] _do_rx(): IF_RECV() retruns -84 (dlen=110)
  1566. [ 48.311570@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  1567. [ 48.311595@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  1568. [ 48.311617@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1569. [ 48.311655@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1570. [ 48.311711@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  1571. [ 48.311734@0] _do_rx(): IF_RECV() retruns -84 (dlen=115)
  1572. [ 48.312519@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  1573. [ 48.312544@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  1574. [ 48.312565@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1575. [ 48.312603@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1576. [ 48.312657@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  1577. [ 48.312681@0] _do_rx(): IF_RECV() retruns -84 (dlen=110)
  1578. [ 49.007997@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  1579. [ 49.008017@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  1580. [ 49.008032@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1581. [ 49.008050@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1582. [ 49.008083@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  1583. [ 49.008093@0] _do_rx(): IF_RECV() retruns -84 (dlen=8)
  1584. [ 54.645502@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  1585. [ 54.645526@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  1586. [ 54.645544@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1587. [ 54.645567@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1588. [ 54.645607@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  1589. [ 54.645620@0] _do_rx(): IF_RECV() retruns -84 (dlen=8)
  1590. [ 58.029160@2] --------------ssv6200_sw_scan_start():
  1591. [ 58.275183@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  1592. [ 58.275225@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  1593. [ 58.275256@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1594. [ 58.275306@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1595. [ 58.275382@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  1596. [ 58.275409@0] _do_rx(): IF_RECV() retruns -84 (dlen=257)
  1597. [ 58.334895@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  1598. [ 58.334937@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  1599. [ 58.334969@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1600. [ 58.335013@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1601. [ 58.335085@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  1602. [ 58.335112@0] _do_rx(): IF_RECV() retruns -84 (dlen=229)
  1603. [ 58.479817@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  1604. [ 58.479861@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  1605. [ 58.479892@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1606. [ 58.479937@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1607. [ 58.480006@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  1608. [ 58.480032@0] _do_rx(): IF_RECV() retruns -84 (dlen=257)
  1609. [ 59.013260@1] ==============ssv6200_sw_scan_complete():
  1610. [ 60.283071@0] [aml_sd_emmc_irq] sdio: warning... data crc, vstat:0xa3ffa008, virqc:3fff
  1611. [ 60.283073@0] [aml_sd_emmc_irq] @ cmd 53 with ffffffc060b8ba78; stop 0, status 4
  1612. [ 60.283088@1] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
  1613. [ 60.283089@1] aml_sd_emmc_data_thread 2639 sdio: cmd:53
  1614. [ 60.283122@0] SSV6XXX_SDIO sdio:0001:1: sdio read failed size ret[-84]
  1615. [ 60.283126@0] _do_rx(): IF_RECV() retruns -84 (dlen=8)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!