API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Sep 7th, 2019
180
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 17.73 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 4.14.141 (builder@buildhost) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10960-641f6b6c26)) #0 SMP Thu Sep 5 21:33:19 2019
  2. [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
  3. [ 0.000000] bootconsole [early0] enabled
  4. [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
  5. [ 0.000000] MIPS: machine is ASUS RT-AC57U
  6. [ 0.000000] Determined physical RAM map:
  7. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  8. [ 0.000000] Initrd not found or empty - disabling initrd
  9. [ 0.000000] VPE topology {2,2} total 4
  10. [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  11. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  12. [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  13. [ 0.000000] Zone ranges:
  14. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
  15. [ 0.000000] HighMem empty
  16. [ 0.000000] Movable zone start for each node
  17. [ 0.000000] Early memory node ranges
  18. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
  19. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
  20. [ 0.000000] On node 0 totalpages: 32768
  21. [ 0.000000] free_area_init_node: node 0, pgdat 80632660, node_mem_map 81003000
  22. [ 0.000000] Normal zone: 288 pages used for memmap
  23. [ 0.000000] Normal zone: 0 pages reserved
  24. [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
  25. [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4e0 with crng_init=0
  26. [ 0.000000] percpu: Embedded 14 pages/cpu s26096 r8192 d23056 u57344
  27. [ 0.000000] pcpu-alloc: s26096 r8192 d23056 u57344 alloc=14*4096
  28. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  29. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480
  30. [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
  31. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  32. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  33. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  34. [ 0.000000] Writing ErrCtl register=0000d100
  35. [ 0.000000] Readback ErrCtl register=0000d100
  36. [ 0.000000] Memory: 121608K/131072K available (5005K kernel code, 258K rwdata, 1080K rodata, 1260K init, 260K bss, 9464K reserved, 0K cma-reserved, 0K highmem)
  37. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  38. [ 0.000000] Hierarchical RCU implementation.
  39. [ 0.000000] NR_IRQS: 256
  40. [ 0.000000] CPU Clock: 875MHz
  41. [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xc9cd436c30, max_idle_ns: 440795235170 ns
  42. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4368595306 ns
  43. [ 0.000009] sched_clock: 32 bits at 437MHz, resolution 2ns, wraps every 4908533758ns
  44. [ 0.015505] Calibrating delay loop... 580.40 BogoMIPS (lpj=2902016)
  45. [ 0.087772] pid_max: default: 32768 minimum: 301
  46. [ 0.097138] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  47. [ 0.110162] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  48. [ 0.126276] Hierarchical SRCU implementation.
  49. [ 0.135822] smp: Bringing up secondary CPUs ...
  50. [ 0.146388] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  51. [ 0.146398] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  52. [ 0.146409] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  53. [ 0.146547] CPU1 revision is: 0001992f (MIPS 1004Kc)
  54. [ 0.205194] Synchronize counters for CPU 1: done.
  55. [ 0.289005] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  56. [ 0.289015] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  57. [ 0.289024] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  58. [ 0.289102] CPU2 revision is: 0001992f (MIPS 1004Kc)
  59. [ 0.326128] Synchronize counters for CPU 2: done.
  60. [ 0.387307] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  61. [ 0.387316] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  62. [ 0.387324] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
  63. [ 0.387401] CPU3 revision is: 0001992f (MIPS 1004Kc)
  64. [ 0.445760] Synchronize counters for CPU 3: done.
  65. [ 0.505376] smp: Brought up 1 node, 4 CPUs
  66. [ 0.517646] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  67. [ 0.537132] futex hash table entries: 1024 (order: 3, 32768 bytes)
  68. [ 0.549673] pinctrl core: initialized pinctrl subsystem
  69. [ 0.561478] NET: Registered protocol family 16
  70. [ 0.580407] FPU Affinity set after 11660 emulations
  71. [ 0.581261] pull PCIe RST: RALINK_RSTCTRL = 4000000
  72. [ 0.891601] release PCIe RST: RALINK_RSTCTRL = 7000000
  73. [ 0.901668] ***** Xtal 25MHz *****
  74. [ 0.908396] release PCIe RST: RALINK_RSTCTRL = 7000000
  75. [ 0.918607] Port 0 N_FTS = 1b105000
  76. [ 0.925502] Port 1 N_FTS = 1b105000
  77. [ 0.932431] Port 2 N_FTS = 1b102800
  78. [ 2.091983] PCIE2 no card, disable it(RST&CLK)
  79. [ 2.100676] -> 21007f2
  80. [ 2.105496] PCIE0 enabled
  81. [ 2.110693] PCIE1 enabled
  82. [ 2.115878] PCI host bridge /pcie@1e140000 ranges:
  83. [ 2.125402] MEM 0x0000000060000000..0x000000006fffffff
  84. [ 2.135766] IO 0x000000001e160000..0x000000001e16ffff
  85. [ 2.146123] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
  86. [ 2.169700] mt7621_gpio 1e000600.gpio: registering 32 gpios
  87. [ 2.181113] mt7621_gpio 1e000600.gpio: registering 32 gpios
  88. [ 2.192323] mt7621_gpio 1e000600.gpio: registering 32 gpios
  89. [ 2.205593] PCI host bridge to bus 0000:00
  90. [ 2.213655] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
  91. [ 2.227271] pci_bus 0000:00: root bus resource [io 0xffffffff]
  92. [ 2.239017] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  93. [ 2.252498] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  94. [ 2.268262] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
  95. [ 2.268302] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
  96. [ 2.268314] pci 0000:00:00.0: reg 0x14: [mem 0x60300000-0x6030ffff]
  97. [ 2.268378] pci 0000:00:00.0: supports D1
  98. [ 2.268387] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  99. [ 2.268625] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
  100. [ 2.268653] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
  101. [ 2.268668] pci 0000:00:01.0: reg 0x14: [mem 0x60310000-0x6031ffff]
  102. [ 2.268718] pci 0000:00:01.0: supports D1
  103. [ 2.268726] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
  104. [ 2.269123] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000
  105. [ 2.269180] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
  106. [ 2.269227] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  107. [ 2.269320] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
  108. [ 2.269512] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  109. [ 2.269695] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000
  110. [ 2.269738] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
  111. [ 2.269865] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
  112. [ 2.270050] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
  113. [ 2.270067] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
  114. [ 2.270136] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
  115. [ 2.283179] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
  116. [ 2.296983] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
  117. [ 2.310119] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
  118. [ 2.323945] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
  119. [ 2.337419] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
  120. [ 2.351764] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
  121. [ 2.365238] pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff]
  122. [ 2.378730] pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff]
  123. [ 2.392205] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
  124. [ 2.406722] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref]
  125. [ 2.421058] pci 0000:00:00.0: PCI bridge to [bus 01]
  126. [ 2.430884] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
  127. [ 2.444377] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref]
  128. [ 2.458736] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff]
  129. [ 2.472206] pci 0000:00:01.0: PCI bridge to [bus 02]
  130. [ 2.482027] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff]
  131. [ 2.496914] clocksource: Switched to clocksource GIC
  132. [ 2.508489] NET: Registered protocol family 2
  133. [ 2.517843] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  134. [ 2.531592] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
  135. [ 2.544195] TCP: Hash tables configured (established 1024 bind 1024)
  136. [ 2.556964] UDP hash table entries: 256 (order: 1, 8192 bytes)
  137. [ 2.568463] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  138. [ 2.581136] NET: Registered protocol family 1
  139. [ 2.589736] PCI: CLS 0 bytes, default 32
  140. [ 2.826863] 4 CPUs re-calibrate udelay(lpj = 2908160)
  141. [ 2.838442] Crashlog allocated RAM at address 0x3f00000
  142. [ 2.848966] workingset: timestamp_bits=14 max_order=15 bucket_order=1
  143. [ 2.865537] random: fast init done
  144. [ 2.876988] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  145. [ 2.888471] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  146. [ 2.911625] io scheduler noop registered
  147. [ 2.919315] io scheduler deadline registered (default)
  148. [ 2.930686] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  149. [ 2.947088] console [ttyS0] disabled
  150. [ 2.954097] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
  151. [ 2.972091] console [ttyS0] enabled
  152. [ 2.985871] bootconsole [early0] disabled
  153. [ 3.004136] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
  154. [ 3.018467] spi-mt7621 1e000b00.spi: sys_freq: 218750000
  155. [ 3.038623] m25p80 spi0.0: w25q128 (16384 Kbytes)
  156. [ 3.048063] 4 fixed-partitions partitions found on MTD device spi0.0
  157. [ 3.060718] Creating 4 MTD partitions on "spi0.0":
  158. [ 3.070273] 0x000000000000-0x000000030000 : "u-boot"
  159. [ 3.081380] 0x000000030000-0x000000040000 : "config"
  160. [ 3.092432] 0x000000040000-0x000000050000 : "factory"
  161. [ 3.103691] 0x000000050000-0x000001000000 : "firmware"
  162. [ 3.115385] 2 uimage-fw partitions found on MTD device firmware
  163. [ 3.127209] Creating 2 MTD partitions on "firmware":
  164. [ 3.137106] 0x000000000000-0x0000001fe979 : "kernel"
  165. [ 3.148187] 0x0000001fe979-0x000000fb0000 : "rootfs"
  166. [ 3.159189] mtd: device 5 (rootfs) set to be root filesystem
  167. [ 3.170616] 1 squashfs-split partitions found on MTD device rootfs
  168. [ 3.182958] 0x000000430000-0x000000fb0000 : "rootfs_data"
  169. [ 3.195608] libphy: Fixed MDIO Bus: probed
  170. [ 3.259111] libphy: mdio: probed
  171. [ 4.666588] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
  172. [ 4.679157] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
  173. [ 4.698583] NET: Registered protocol family 10
  174. [ 4.709137] Segment Routing with IPv6
  175. [ 4.716510] NET: Registered protocol family 17
  176. [ 4.725500] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  177. [ 4.751302] 8021q: 802.1Q VLAN Support v1.8
  178. [ 4.762267] hctosys: unable to open rtc device (rtc0)
  179. [ 4.780921] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
  180. [ 4.799232] Freeing unused kernel memory: 1260K
  181. [ 4.808303] This architecture does not have kernel memory protection.
  182. [ 5.591448] init: Console is alive
  183. [ 5.598567] init: - watchdog -
  184. [ 6.310080] mtk_soc_eth 1e100000.ethernet eth0: port 2 link up
  185. [ 6.553493] mtk_soc_eth 1e100000.ethernet eth0: port 0 link up
  186. [ 6.643125] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  187. [ 6.794868] usbcore: registered new interface driver usbfs
  188. [ 6.805953] usbcore: registered new interface driver hub
  189. [ 6.816709] usbcore: registered new device driver usb
  190. [ 6.835046] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
  191. [ 6.852348] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
  192. [ 6.870063] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
  193. [ 6.880688] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
  194. [ 6.907081] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
  195. [ 6.925365] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
  196. [ 6.937898] hub 1-0:1.0: USB hub found
  197. [ 6.945437] hub 1-0:1.0: 2 ports detected
  198. [ 6.954109] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
  199. [ 6.964748] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
  200. [ 6.979669] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
  201. [ 6.992708] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  202. [ 7.009749] hub 2-0:1.0: USB hub found
  203. [ 7.017328] hub 2-0:1.0: 1 port detected
  204. [ 7.030172] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  205. [ 7.057269] init: - preinit -
  206. [ 8.076997] mtk_soc_eth 1e100000.ethernet: PPE started
  207. [ 8.157352] random: procd: uninitialized urandom read (4 bytes read)
  208. [ 11.491284] jffs2: notice: (485) jffs2_build_xattr_subsystem: complete building xattr subsystem, 6 of xdatum (3 unchecked, 3 orphan) and 42 of xref (3 dead, 0 orphan) found.
  209. [ 11.528553] mount_root: switching to jffs2 overlay
  210. [ 11.560962] overlayfs: upper fs does not support tmpfile.
  211. [ 11.583052] urandom-seed: Seeding with /etc/urandom.seed
  212. [ 11.690524] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
  213. [ 11.720381] procd: - early -
  214. [ 11.726212] procd: - watchdog -
  215. [ 12.437115] procd: - watchdog -
  216. [ 12.443699] procd: - ubus -
  217. [ 12.492599] random: ubusd: uninitialized urandom read (4 bytes read)
  218. [ 12.509492] random: ubusd: uninitialized urandom read (4 bytes read)
  219. [ 12.522567] random: ubusd: uninitialized urandom read (4 bytes read)
  220. [ 12.536192] procd: - init -
  221. [ 13.203075] kmodloader: loading kernel modules from /etc/modules.d/*
  222. [ 13.220352] urngd: v1.0.0 started.
  223. [ 13.221251] ip6_tables: (C) 2000-2006 Netfilter Core Team
  224. [ 13.246001] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
  225. [ 13.261104] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
  226. [ 13.276204] ip_tables: (C) 2000-2006 Netfilter Core Team
  227. [ 13.294108] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
  228. [ 13.348689] xt_time: kernel timezone is -0000
  229. [ 13.374221] random: crng init done
  230. [ 13.381054] random: 6 urandom warning(s) missed due to ratelimiting
  231. [ 13.436378] bus=0x2, slot = 0x1, irq=0xff
  232. [ 13.444631] mt7603e 0000:02:00.0: ASIC revision: 76030010
  233. [ 14.545505] mt7603e 0000:02:00.0: Firmware Version: ap_pcie
  234. [ 14.556638] mt7603e 0000:02:00.0: Build Time: 20160107100755
  235. [ 14.606904] mt7603e 0000:02:00.0: firmware init done
  236. [ 14.781649] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  237. [ 14.791768] bus=0x1, slot = 0x0, irq=0xff
  238. [ 14.800048] mt76x2e 0000:01:00.0: ASIC revision: 76120044
  239. [ 15.521192] mt76x2e 0000:01:00.0: ROM patch build: 20141115060606a
  240. [ 15.537170] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
  241. [ 15.548123] mt76x2e 0000:01:00.0: Build: 1
  242. [ 15.556260] mt76x2e 0000:01:00.0: Build Time: 201507311614____
  243. [ 15.586909] mt76x2e 0000:01:00.0: Firmware running!
  244. [ 15.599480] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
  245. [ 15.606278] PPP generic driver version 2.4.2
  246. [ 15.616719] NET: Registered protocol family 24
  247. [ 15.628797] kmodloader: done loading kernel modules from /etc/modules.d/*
  248. [ 22.053316] mtk_soc_eth 1e100000.ethernet: PPE started
  249. [ 22.069338] device eth0 entered promiscuous mode
  250. [ 22.080009] br-lan: port 1(eth0.1) entered blocking state
  251. [ 22.091177] br-lan: port 1(eth0.1) entered disabled state
  252. [ 22.102661] device eth0.1 entered promiscuous mode
  253. [ 22.116815] br-lan: port 1(eth0.1) entered blocking state
  254. [ 22.127667] br-lan: port 1(eth0.1) entered forwarding state
  255. [ 22.139390] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  256. [ 23.097748] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  257. [ 24.503193] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
  258. [ 24.521646] br-lan: port 2(wlan1) entered blocking state
  259. [ 24.532336] br-lan: port 2(wlan1) entered disabled state
  260. [ 24.543613] device wlan1 entered promiscuous mode
  261. [ 24.801483] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  262. [ 24.840947] br-lan: port 3(wlan0) entered blocking state
  263. [ 24.851580] br-lan: port 3(wlan0) entered disabled state
  264. [ 24.863098] device wlan0 entered promiscuous mode
  265. [ 24.872920] br-lan: port 3(wlan0) entered blocking state
  266. [ 24.883570] br-lan: port 3(wlan0) entered forwarding state
  267. [ 25.704817] br-lan: port 3(wlan0) entered disabled state
  268. [ 25.716066] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
  269. [ 25.729146] br-lan: port 2(wlan1) entered blocking state
  270. [ 25.739764] br-lan: port 2(wlan1) entered forwarding state
  271. [ 25.753486] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  272. [ 25.766694] br-lan: port 3(wlan0) entered blocking state
  273. [ 25.777323] br-lan: port 3(wlan0) entered forwarding state
  274. [17059.511421] mtk_soc_eth 1e100000.ethernet eth0: port 2 link down
  275. [17061.165954] mtk_soc_eth 1e100000.ethernet eth0: port 2 link up
  276. [17064.796261] mtk_soc_eth 1e100000.ethernet eth0: port 2 link down
  277. [61806.612965] mtk_soc_eth 1e100000.ethernet eth0: port 2 link up
  278. [61825.806216] mtk_soc_eth 1e100000.ethernet eth0: port 2 link down
  279. [61828.641158] mtk_soc_eth 1e100000.ethernet eth0: port 2 link up
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!