Typ A
...
Polaczenie RS232 do Console:
Lab A-1 do Main
Lab C-7 do Building 1
Lab B-2 do Bldg1-SW1
Lab D-3 do Bldg1-SW2
North Campus do Building 2

Building 1 (klikamy Lab C-7):
Router> en
Router# configure terminal
Router(config)# hostname Building-1
Building-1(config)# no ip domain-lookup
Building-1(config)# enable secret cisco
Building-1(config)# line console 0
Building-1(config-line)# logging synchronous
Building-1(config-line)# password class
Building-1(config-line)# login
Building-1(config-line)# exit
Building-1(config)# line vty 0 4
Building-1(config-line)# password class
Building-1(config-line)# login
Building-1(config-line)# exit
Building-1(config)# service password-encryption
Building-1(config)# banner motd #Welcome to Building-1#
Building-1(config)# interface serial 0/0/0
Building-1(config-if)# ip address 192.168.10.105 255.255.255.252
Building-1(config-if)# no sh
Building-1(config-if)# description To_Main_Router
Building-1(config-if)# do sh const s0/0/0 <- patrzymy tutaj czy w 3 linia zaczyna się od: DCE V.35
Building-1(config-if)# clock rate 128000
Building-1(config-if)# exit

Klikamy Lab A-1:
Router> en
Router# configure terminal
Router(config)# hostname Main
Main(config)# interface serial 0/0/0
Main(config-if)# ip address 192.168.10.106 255.255.255.252
Main(config-if)# do sh conf <- lecimy na koniec
Main(config-if)# do sh cont s0/0/0 <- 3 linia musi zaczynać się od DTE V.35
Main(config-if)# interface serial 0/0/1
Main(config-if)# ip address 192.168.10.113 255.255.255.252
Main(config-if)# do sh const s0/0/1 <- 3 linia: DCE V.35
Main(config-if)# clock rate 128000
Main(config-if)# interface serial 0/1/0
Main(config-if)# ip address 198.51.100.1 255.255.255.240
Main(config-if)# no sh
Main(config-if)# exit
Main(config)# interface gigabitEthernet 0/0
Main(config-if)# ip address 192.168.18.41 255.255.255.248
Main(config-if)# no shutdown
Main(config-if)# do sh cont s0/0/1 <- 3 linia: DCE V.35
Main(config-if)# do sh cont s0/1/0 <- 3 linia: DTE V.35

Klikamy North Campus:
Router> en
Router# configure terminal
Router(config)# hostname Building-2
Building-2(config)# interface serial 0/0/0
Building-2(config-if)# ip address 192.168.10.126 255.255.255.252
Building-2(config-if)# no shutdown
Building-2(config-if)# do sh cont s0/0/0 < DTE V.35
Building-2(config-if)# exit
Building-2(config)# interface serial 0/0/1
Building-2(config-if)# ip address 192.168.10.114 255.255.255.252
Building-2(config-if)# no sh
Building-2(config-if)# do sh cont s0/0/1 <- DTE V.35
Building-2(config-if)# do sh cont s0/0/0

Klikamy Lab C-7:
Building-1> en
Building-1# configure terminal
Building-1(config)# ip route 0.0.0.0 0.0.0.0 serial 0/0/0

Klikamy Lab A-1:
Main(config-if)# exit
Main(config)# ip route 0.0.0.0 0.0.0.0 serial 0/1/0

Klikamy North Campus:
Building-2(config-if)# exit
Building-2(config)# ip route 0.0.0.0 0.0.0.0 serial 0/0/1
Building-2(config)# ip route 192.168.200.0 255.255.252.0 serial 0/0/0

KLikamy Lab A-1:
Main(config)# ip route 192.168.200.0 255.255.252.0 serial 0/0/1
Main(config)# do sh ip rou

KLikamy North Campus:
Building-2(config)# router ospf 10
Building-2(config-router)# do sh ip rou <- beda podane 4x ip
Building-2(config-router)# network 192.168.10.112 0.0.0.3 area 0