Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- dmesg | grep 01:00.0
- [ 0.164836] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
- [ 0.164852] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
- [ 0.164869] pci 0000:01:00.0: reg 1c: [mem 0xf4000000-0xf5ffffff 64bit]
- /* reserve MMIO BARs of gfx for 1:1 mapping */
- DWordMemory(
- ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000,
- 0xF6000000,
- 0xF6FFFFFF,
- 0x00000000,
- 0x01000000)
- DWordMemory(
- ResourceProducer, PosDecode, MinFixed, MaxFixed,
- NonCacheable, ReadWrite,
- 0x00000000,
- 0xE0000000,
- 0xEFFFFFFF,
- 0x00000000,
- 0x010000000)
- DWordMemory(
- ResourceProducer, PosDecode, MinFixed, MaxFixed,
- Cacheable, ReadWrite,
- 0x00000000,
- 0xF4000000,
- 0xF5FFFFFF,
- 0x00000000,
- 0x02000000)
- #######################################################
- dmesg | grep back
- [ 15.100770] boot.localnet[471]: Setting up loopback interface RTNETLINK answers: File exists
- [ 34.336335] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 54.288803] net_ratelimit: 5 callbacks suppressed
- [ 59.857172] net_ratelimit: 7 callbacks suppressed
- [ 115.564669] net_ratelimit: 6 callbacks suppressed
- [ 121.439740] net_ratelimit: 3 callbacks suppressed
- [ 140.656156] pciback 0000:01:00.0: restoring config space at offset 0x1 (was 0x100400, writing 0x100000)
- [ 140.934506] pciback: vpci: 0000:01:00.0: assign to virtual slot 0
- [ 143.353368] net_ratelimit: 8 callbacks suppressed
- [ 148.642525] net_ratelimit: 10 callbacks suppressed
- [ 154.373772] net_ratelimit: 4 callbacks suppressed
- [ 283.880173] pciback 0000:01:00.0: restoring config space at offset 0x1 (was 0x100400, writing 0x100007)
- [ 299.160140] pciback 0000:01:00.0: restoring config space at offset 0x1 (was 0x100400, writing 0x100007)
- [ 299.329246] pciback: vpci: 0000:01:00.0: assign to virtual slot 0
- [ 325.040047] net_ratelimit: 4 callbacks suppressed
- [ 867.452095] pciback 0000:01:00.0: restoring config space at offset 0x1 (was 0x100400, writing 0x100007)
- ###############################################################
- log:
- domid: 3
- Strip off blktap sub-type prefix to /tank/data/xen/kristijan_win7/kristijan_win7_C.qcow2 (drv 'qcow2')
- Using file /tank/data/xen/kristijan_win7/kristijan_win7_C.qcow2 in read-write mode
- Strip off blktap sub-type prefix to /tank/data/xen/kristijan_win7/kristijan_win7_D.qcow2 (drv 'qcow2')
- Using file /tank/data/xen/kristijan_win7/kristijan_win7_D.qcow2 in read-write mode
- Watching /local/domain/0/device-model/3/logdirty/cmd
- Watching /local/domain/0/device-model/3/command
- Watching /local/domain/3/cpu
- qemu_map_cache_init nr_buckets = 10000 size 4194304
- shared page at pfn feffd
- buffered io page at pfn feffb
- Guest uuid = d6cc2f9e-8e3a-4bd3-ae14-623fb3295ce3
- Register xen platform.
- Done register platform.
- platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
- xs_read(/local/domain/0/device-model/3/xen_extended_power_mgmt): read error
- Log-dirty: no command yet.
- I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
- I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
- vcpu-set: watch node error.
- I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
- xs_read(/local/domain/3/log-throttling): read error
- qemu: ignoring not-understood drive `/local/domain/3/log-throttling'
- medium change watch on `/local/domain/3/log-throttling' - unknown device, ignored
- I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
- I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
- I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
- dm-command: hot insert pass-through pci dev
- register_real_device: Assigning real physical device 01:00.0 ...
- pt_iomul_init: Error: pt_iomul_init: No such device: setup io multiplexing failed! 0x1:0x0.0x0
- pt_register_regions: IO region registered (size=0x01000000 base_addr=0xf6000000)
- pt_register_regions: IO region registered (size=0x10000000 base_addr=0xe000000c)
- pt_register_regions: IO region registered (size=0x02000000 base_addr=0xf4000004)
- pt_register_regions: IO region registered (size=0x00000080 base_addr=0x0000bf01)
- pt_register_regions: Expansion ROM registered (size=0x00020000 base_addr=0xf7000000)
- pt_msgctrl_reg_init: MSI enabled already, disable first
- pt_msi_setup: msi mapped with pirq 37
- pci_intx: intx=1
- register_real_device: Real physical device 01:00.0 registered successfuly!
- IRQ type = MSI-INTx
- pt_bar_reg_read: first read BARs of gfx
- pt_iomem_map: e_phys=f6000000 maddr=f6000000 type=0 len=16777216 index=0 first_map=1
- pt_bar_reg_read: first read BARs of gfx
- pt_iomem_map: e_phys=e0000000 maddr=e0000000 type=8 len=268435456 index=1 first_map=1
- pt_bar_reg_read: first read BARs of gfx
- pt_bar_reg_read: first read BARs of gfx
- pt_iomem_map: e_phys=f4000000 maddr=f4000000 type=0 len=33554432 index=3 first_map=1
- pt_bar_reg_read: first read BARs of gfx
- pt_bar_reg_read: first read BARs of gfx
- pt_ioport_map: e_phys=bf00 pio_base=bf00 len=128 index=5 first_map=1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement