Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
- [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine model: Xilinx Zynq
- [ 0.000000] cma: CMA: reserved 128 MiB at 27800000
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] On node 0 totalpages: 258048
- [ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000
- [ 0.000000] Normal zone: 1520 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 194560 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 496 pages used for memmap
- [ 0.000000] HighMem zone: 63488 pages, LIFO batch:15
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
- [ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256528
- [ 0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
- [ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
- [ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
- [ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] ps7-slcr mapped to f0004000
- [ 0.000000] zynq_clock_init: clkc starts at f0004100
- [ 0.000000] Zynq clock init
- [ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
- [ 0.000298] ps7-ttc #0 at f0006000, irq=43
- [ 0.000605] Console: colour dummy device 80x30
- [ 0.000643] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
- [ 0.040203] pid_max: default: 32768 minimum: 301
- [ 0.040426] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.040449] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.042599] CPU: Testing write buffer coherency: ok
- [ 0.042946] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.043005] Setting up static identity map for 0x4c4af8 - 0x4c4b50
- [ 0.043226] L310 cache controller enabled
- [ 0.043245] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
- [ 0.121027] CPU1: Booted secondary processor
- [ 0.210223] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.210354] Brought up 2 CPUs
- [ 0.210373] SMP: Total of 2 processors activated.
- [ 0.210382] CPU: All CPU(s) started in SVC mode.
- [ 0.211034] devtmpfs: initialized
- [ 0.213450] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- [ 0.214653] regulator-dummy: no parameters
- [ 0.221915] NET: Registered protocol family 16
- [ 0.224216] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.226493] cpuidle: using governor ladder
- [ 0.226507] cpuidle: using governor menu
- [ 0.233879] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
- [ 0.235381] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
- [ 0.235394] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [ 0.235508] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
- [ 0.257202] bio: create slab <bio-0> at 0
- [ 0.258626] vgaarb: loaded
- [ 0.259338] SCSI subsystem initialized
- [ 0.260261] usbcore: registered new interface driver usbfs
- [ 0.260945] usbcore: registered new interface driver hub
- [ 0.261487] usbcore: registered new device driver usb
- [ 0.262025] media: Linux media interface: v0.10
- [ 0.262183] Linux video capture interface: v2.00
- [ 0.262422] pps_core: LinuxPPS API ver. 1 registered
- [ 0.262434] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.262554] PTP clock support registered
- [ 0.262905] EDAC MC: Ver: 3.0.0
- [ 0.263966] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.266791] DMA-API: preallocated 4096 debug entries
- [ 0.266806] DMA-API: debugging enabled by kernel config
- [ 0.266880] Switched to clocksource arm_global_timer
- [ 0.286706] NET: Registered protocol family 2
- [ 0.287419] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.287515] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.287674] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.287742] TCP: reno registered
- [ 0.287760] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.287812] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.288079] NET: Registered protocol family 1
- [ 0.288442] RPC: Registered named UNIX socket transport module.
- [ 0.288456] RPC: Registered udp transport module.
- [ 0.288464] RPC: Registered tcp transport module.
- [ 0.288472] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.288485] PCI: CLS 0 bytes, default 64
- [ 0.288925] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
- [ 0.290956] futex hash table entries: 512 (order: 3, 32768 bytes)
- [ 0.292337] bounce pool size: 64 pages
- [ 0.293228] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
- [ 0.293435] msgmni has been set to 1486
- [ 0.294206] io scheduler noop registered
- [ 0.294219] io scheduler deadline registered
- [ 0.294262] io scheduler cfq registered (default)
- [ 0.303581] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
- [ 0.303601] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
- [ 0.427349] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
- [ 1.000431] console [ttyPS0] enabled
- [ 1.004703] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
- [ 1.012344] [drm] Initialized drm 1.1.0 20060810
- [ 1.029372] brd: module loaded
- [ 1.038728] loop: module loaded
- [ 1.048344] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
- [ 1.054090] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
- [ 1.062084] libphy: XEMACPS mii bus: probed
- [ 1.066451] ------------- phy_id = 0x3625e62
- [ 1.071521] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
- [ 1.080328] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.086983] ehci-pci: EHCI PCI platform driver
- [ 1.094205] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
- [ 1.101041] usbcore: registered new interface driver usb-storage
- [ 1.107912] mousedev: PS/2 mouse device common for all mice
- [ 1.114011] i2c /dev entries driver
- [ 1.120912] zynq-edac f8006000.ps7-ddrc: ecc not enabled
- [ 1.126398] cpufreq_cpu0: failed to get cpu0 regulator: -19
- [ 1.132334] Xilinx Zynq CpuIdle Driver started
- [ 1.137204] sdhci: Secure Digital Host Controller Interface driver
- [ 1.143294] sdhci: Copyright(c) Pierre Ossman
- [ 1.147677] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 1.154435] mmc0: no vqmmc regulator found
- [ 1.158474] mmc0: no vmmc regulator found
- [ 1.196900] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
- [ 1.205576] usbcore: registered new interface driver usbhid
- [ 1.211088] usbhid: USB HID core driver
- [ 1.215797] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
- [ 1.222096] nand: Micron MT29F2G08ABAEAWP
- [ 1.226062] nand: 256MiB, SLC, page size: 2048, OOB size: 64
- [ 1.232014] Bad block table found at page 131008, version 0x01
- [ 1.238241] Bad block table found at page 130944, version 0x01
- [ 1.244291] 3 ofpart partitions found on MTD device pl353-nand
- [ 1.250071] Creating 3 MTD partitions on "pl353-nand":
- [ 1.255161] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
- [ 1.263230] 0x000002000000-0x00000b000000 : "angstram-rootfs"
- [ 1.270570] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
- [ 1.279543] TCP: cubic registered
- [ 1.282778] NET: Registered protocol family 17
- [ 1.287490] Registering SWP/SWPB emulation handler
- [ 1.293403] regulator-dummy: disabling
- [ 1.297749] UBI: attaching mtd1 to ubi0
- [ 1.825695] UBI: scanning is finished
- [ 1.837332] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
- [ 1.844381] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
- [ 1.851168] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
- [ 1.857852] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
- [ 1.864691] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
- [ 1.870701] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
- [ 1.877812] UBI: max/mean erase counter: 50/34, WL threshold: 4096, image sequence number: 1555284814
- [ 1.887015] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
- [ 1.896213] UBI: background thread "ubi_bgt0d" started, PID 1080
- [ 1.896218] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- [ 1.900182] ALSA device list:
- [ 1.900185] No soundcards found.
- [ 1.916587] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
- [ 1.945753] UBIFS: recovery needed
- [ 2.024565] UBIFS: recovery completed
- [ 2.028258] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
- [ 2.034182] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
- [ 2.043322] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
- [ 2.053201] UBIFS: reserved for root: 0 bytes (0 KiB)
- [ 2.058242] UBIFS: media format: w4/r0 (latest is w4/r0), UUID DA26756C-5179-4D43-A54D-86DC20901F44, small LPT model
- [ 2.069520] VFS: Mounted root (ubifs filesystem) on device 0:11.
- [ 2.076948] devtmpfs: mounted
- [ 2.080047] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
- [ 2.924994] random: dd urandom read with 0 bits of entropy available
- [ 3.316923]
- [ 3.316923] bcm54xx_config_init
- [ 3.926915]
- [ 3.926915] bcm54xx_config_init
- [ 6.927746] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
- [ 6.933833] xemacps e000b000.ps7-ethernet: link up (100/FULL)
- [ 22.555915] In axi fpga driver!
- [ 22.559025] request_mem_region OK!
- [ 22.562383] AXI fpga dev virtual address is 0xf01fe000
- [ 22.567525] *base_vir_addr = 0x8c510
- [ 22.582816] In fpga mem driver!
- [ 22.585887] request_mem_region OK!
- [ 22.589516] fpga mem virtual address is 0xf3000000
- [ 23.396311]
- [ 23.396311] bcm54xx_config_init
- [ 24.026268]
- [ 24.026268] bcm54xx_config_init
- [ 27.026773] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
- [ 27.032793] xemacps e000b000.ps7-ethernet: link up (100/FULL)
- [ 1719.461640] random: nonblocking pool is initialized
- This is XILINX board. Totalram: 1039794176
- Detect 1GB control board of XILINX
- DETECT HW version=0008c510
- miner ID : 80546c81123b885c
- Miner Type = S9
- AsicType = 1387
- real AsicNum = 63
- use critical mode to search freq...
- get PLUG ON=0x000000e0
- Find hashboard on Chain[5]
- Find hashboard on Chain[6]
- Find hashboard on Chain[7]
- set_reset_allhashboard = 0x0000ffff
- Check chain[5] PIC fw version=0x03
- Check chain[6] PIC fw version=0x03
- Check chain[7] PIC fw version=0x03
- chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
- has freq in PIC, will disable freq setting.
- chain[5] has freq in PIC and will jump over...
- Chain[5] has core num in PIC
- Chain[5] ASIC[45] has core num=1
- Check chain[5] PIC fw version=0x03
- chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
- has freq in PIC, will disable freq setting.
- chain[6] has freq in PIC and will jump over...
- Chain[6] has core num in PIC
- Chain[6] ASIC[12] has core num=2
- Chain[6] ASIC[13] has core num=2
- Chain[6] ASIC[16] has core num=2
- Check chain[6] PIC fw version=0x03
- chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
- has freq in PIC, will disable freq setting.
- chain[7] has freq in PIC and will jump over...
- Chain[7] has core num in PIC
- Chain[7] ASIC[7] has core num=1
- Chain[7] ASIC[32] has core num=15
- Chain[7] ASIC[35] has core num=1
- Chain[7] ASIC[41] has core num=1
- Chain[7] ASIC[46] has core num=15
- Chain[7] ASIC[50] has core num=3
- Check chain[7] PIC fw version=0x03
- get PIC voltage=108 on chain[5], value=880
- get PIC voltage=108 on chain[6], value=880
- get PIC voltage=108 on chain[7], value=880
- set_reset_allhashboard = 0x00000000
- chain[5] temp offset record: 62,-5,0,0,0,0,33,0
- chain[5] temp chip I2C addr=0x98
- chain[6] temp offset record: 62,-5,0,0,0,0,33,0
- chain[6] temp chip I2C addr=0x98
- chain[7] temp offset record: 62,-6,0,0,0,0,33,0
- chain[7] temp chip I2C addr=0x98
- set_reset_allhashboard = 0x0000ffff
- set_reset_allhashboard = 0x00000000
- CRC error counter=0
- set command mode to VIL
- --- check asic number
- After Get ASIC NUM CRC error counter=0
- set_baud=0
- The min freq=700
- set real timeout 52, need sleep=379392
- After TEST CRC error counter=0
- set_reset_allhashboard = 0x0000ffff
- set_reset_allhashboard = 0x00000000
- search freq for 1 times, completed chain = 3, total chain num = 3
- set_reset_allhashboard = 0x0000ffff
- set_reset_allhashboard = 0x00000000
- restart Miner chance num=2
- waiting for receive_func to exit!
- waiting for pic heart to exit!
- bmminer not found=13570 root 0:00 grep bmminer
- bmminer not found, restart bmminer ...
- This is user mode for mining
- Detect 1GB control board of XILINX
- Miner Type = S9
- Miner compile time: Thu Sep 21 10:57:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
- set_reset_allhashboard = 0x00000000
- set_reset_allhashboard = 0x0000ffff
- miner ID : 80546c81123b885c
- set_reset_allhashboard = 0x0000ffff
- Checking fans!get fan[2] speed=4800
- get fan[2] speed=4800
- get fan[2] speed=4800
- get fan[2] speed=4800
- get fan[2] speed=4800
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1320
- get fan[2] speed=4800
- get fan[5] speed=1440
- get fan[2] speed=4800
- get fan[5] speed=1440
- get fan[2] speed=4800
- get fan[5] speed=1440
- get fan[2] speed=4800
- get fan[5] speed=1440
- get fan[2] speed=4800
- get fan[5] speed=1440
- get fan[2] speed=4800
- get fan[5] speed=1440
- get fan[2] speed=4800
- get fan[5] speed=1440
- get fan[2] speed=4800
- get fan[5] speed=1440
- get fan[2] speed=4800
- get fan[5] speed=1440
- get fan[2] speed=4800
- get fan[5] speed=1440
- get fan[2] speed=4800
- get fan[5] speed=1440
- get fan[2] speed=4800
- get fan[5] speed=1440
- get fan[2] speed=4800
- get fan[5] speed=1440
- get fan[2] speed=4800
- get fan[5] speed=1440
- get fan[2] speed=4800
- get fan[5] speed=1440
- get fan[2] speed=4800
- get fan[5] speed=1440
- get fan[2] speed=4800
- get fan[5] speed=1440
- get fan[2] speed=4800
- get fan[5] speed=1440
- get fan[2] speed=4800
- get fan[5] speed=1440
- get fan[2] speed=4800
- get fan[5] speed=1440
- get fan[2] speed=4800
- Fatal Error: some Fan lost or Fan speed low!
Add Comment
Please, Sign In to add comment