Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- # smartctl -a /dev/sda -d megaraid,2
- smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.13.10-041310-generic] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Vendor: SEAGATE
- Product: ST12000NM0027
- Revision: E002
- Compliance: SPC-4
- User Capacity: 12,000,138,625,024 bytes [12.0 TB]
- Logical block size: 512 bytes
- Physical block size: 4096 bytes
- LB provisioning type: unreported, LBPME=0, LBPRZ=0
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Logical Unit id: 0x5000c500ae064167
- Serial number: ZJV51CXS0000C8499DF5
- Device type: disk
- Transport protocol: SAS (SPL-3)
- Local Time is: Tue Apr 13 12:56:32 2021 -03
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- Temperature Warning: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART Health Status: FAILURE PREDICTION THRESHOLD EXCEEDED: ascq=0x92 [asc=5d, ascq=92]
- Current Drive Temperature: 34 C
- Drive Trip Temperature: 60 C
- Manufactured in week 36 of year 2019
- Specified cycle count over device lifetime: 50000
- Accumulated start-stop cycles: 169
- Specified load-unload count over device lifetime: 600000
- Accumulated load-unload cycles: 599
- Elements in grown defect list: 0
- Vendor (Seagate) cache information
- Blocks sent to initiator = 3745839544
- Blocks received from initiator = 2398949240
- Blocks read from cache and sent to initiator = 2635207832
- Number of read and write commands whose size <= segment size = 86262357
- Number of read and write commands whose size > segment size = 437733
- Vendor (Seagate/Hitachi) factory information
- number of hours powered up = 10702.02
- number of minutes until next internal SMART test = 3
- Error counter log:
- Errors Corrected by Total Correction Gigabytes Total
- ECC rereads/ errors algorithm processed uncorrected
- fast | delayed rewrites corrected invocations [10^9 bytes] errors
- read: 1491969736 0 0 1491969736 0 58943.311 0
- write: 0 0 0 0 0 18821.962 0
- verify: 1640063673 0 0 1640063673 0 24338.420 0
- Non-medium error count: 0
- [GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
- No self-tests have been logged
Advertisement
Add Comment
Please, Sign In to add comment