Beetle lowering

[2017-03-17 21:30:29] [Output] : ★ Lukas Ruiz reaches for his tool bench, wrapping his hands around a tool box.
[2017-03-17 21:30:51] [Output] : ★ Lukas Ruiz walks towards the Volkswagen, as he would lay the tool box by the driver's side door.
[2017-03-17 21:31:13] [Output] : ★ Lukas Ruiz walks back towards the tool bench, sliding a jack towards the car.
[2017-03-17 21:31:35] [Output] : ★ Lukas Ruiz slides it under the car a bit to the right of the driver's side door.
[2017-03-17 21:31:49] [Output] : ★ Lukas Ruiz pumps it up a few times, lifting the car enough to clear some space from the ground.
[2017-03-17 21:39:55] [Output] : ★ Lukas Ruiz reaches for the tool box, grasping a torque wrench, as he would crouch near the front left-
[2017-03-17 21:39:56] [Output] : ★ wheel.      ((Lukas Ruiz))
[2017-03-17 21:40:16] [Output] : ★ Lukas Ruiz pulls over the wheel tampon with his hands, as he would then point the wrench at the-
[2017-03-17 21:40:22] [Output] : ★ four nuts on the wheel.      ((Lukas Ruiz))
[2017-03-17 21:40:36] [Output] : ★ Lukas Ruiz individually rotates them counter-clockwise, pulling them off with some effort.
[2017-03-17 21:41:30] [Output] : ★ Lukas Ruiz pulls the wheel off, laying it on the wall behind the car.
[2017-03-17 21:41:59] [Output] : ★ Lukas Ruiz grasps the cover of the brakes, wiggling it off of the rest of the kit.
[2017-03-17 21:42:14] [Output] : ★ Lukas Ruiz grasps his torque wrench back, as he would untighten the couple of screws holding.
[2017-03-17 21:42:16] [Output] : Lukas Ruiz: (( -* ))
[2017-03-17 21:42:28] [Output] : ★ the brake kit in place.      ((Lukas Ruiz))
[2017-03-17 21:43:00] [Output] : ★ As it would be free from screws, Lukas would grasp them back, pulling off of the rusty-      ((Lukas Ruiz))
[2017-03-17 21:43:16] [Output] : ★ axle with some effort, eventually hitting it with an hammer.      ((Lukas Ruiz))
[2017-03-17 21:43:57] [Output] : ★ Lukas Ruiz grasps the wrench back with his sweaty right palm, as he would untighten the big nut-
[2017-03-17 21:44:02] [Output] : ★ on the bottom of the suspension.      ((Lukas Ruiz))
[2017-03-17 21:44:39] [Output] : ★ As he would finish, the suspension would release the pressure, and would be easier-      ((Lukas Ruiz))
[2017-03-17 21:44:41] [Output] : ★ to work with.      ((Lukas Ruiz))
[2017-03-17 21:45:52] [Output] : ★ Lukas Ruiz kindly pulls the spring from the suspension, quickly inspecting it.
[2017-03-17 21:46:00] [Output] : ★ Lukas Ruiz stands back up, as he would move towards his work bench.
[2017-03-17 21:46:18] [Output] : ★ Lukas Ruiz lays it on the table, as he would turn on his grinder.
[2017-03-17 21:46:32] [Output] : ★ Lukas Ruiz cuts off 2 rings from the spring, one at a time.
[2017-03-17 21:46:50] [Output] : ★ Lukas Ruiz checks the spring for any other imperfections or cracks, as he would conclude it would-
[2017-03-17 21:47:19] [Output] : ★ be reasonable enough to be fit back in the car.      ((Lukas Ruiz))
[2017-03-17 21:47:41] [Output] : ★ Lukas Ruiz crouches infront of the suspension, as he would push the recently cut spring in-
[2017-03-17 21:47:44] [Output] : ★ it's place.      ((Lukas Ruiz))
[2017-03-17 21:48:06] [Output] : ★ After around 10 minutes of sweat and patient tries to fit the spring, Lukas would finally-      ((Lukas Ruiz))
[2017-03-17 21:48:09] [Output] : ★ do it.      ((Lukas Ruiz))
[2017-03-17 21:48:28] [Output] : ★ Lukas Ruiz mounts everything back correctly, as he would grasp the torque wrench and the nut-
[2017-03-17 21:48:41] [Output] : ★ back from the ground, sliding it on the bottom of the suspension.      ((Lukas Ruiz))
[2017-03-17 21:49:01] [Output] : ★ Lukas Ruiz quickly tightens it according to the correct torque amount.
[2017-03-17 21:49:20] [Output] : ★ Lukas Ruiz grabs the brakes back, sliding it in place, and tightening everything in place.
[2017-03-17 21:49:33] [Output] : ★ Lukas Ruiz places the cover back with a few bangs, securing it correctly.
[2017-03-17 21:49:48] [Output] : ★ Lukas Ruiz stands back up, grabbing the wheel, rolling it back to it's previous position.
[2017-03-17 21:50:14] [Output] : ★ Lukas Ruiz slightly bends over his knees, grabbing the wheel and sliding it in the hub.
[2017-03-17 21:50:28] [Output] : ★ Lukas Ruiz swings the 4 nuts in place without tightening them.
[2017-03-17 21:50:48] [Output] : ★ Lukas Ruiz tightens each one clockwise a bit, making sure the wheel it correctly placedf.
[2017-03-17 21:50:52] [Output] : Lukas Ruiz: (( placed* ))
[2017-03-17 21:51:11] [Output] : ★ Lukas Ruiz would finally tighten them accordingly.
[2017-03-17 21:51:28] [Output] : ★ Lukas Ruiz places the cover back, giving it a couple of kind bangs.
[2017-03-17 21:51:35] [Output] : ★ Lukas Ruiz repeats the process for the remaining 3 wheels.
[2017-03-17 21:51:48] [Output] : ★ You would now notice the car reasonably lower.      ((Lukas Ruiz))