Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <5>[ 0.000000] Linux version 2.6.29 (bsp1@bsp1) (gcc version 4.2.2) #242 BSP_3_01_005_20100922 Wed Sep 22 21:41:05 CST 2010
- <4>[ 0.000000] CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5307f
- <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- <4>[ 0.000000] Machine: SMDK6410
- <4>[ 0.000000] Ignoring unrecognised tag 0x00000000
- <4>[ 0.000000] Ignoring unrecognised tag 0x41001099
- <4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
- <7>[ 0.000000] On node 0 totalpages: 52224
- <7>[ 0.000000] free_area_init_node: node 0, pgdat c05d30f4, node_mem_map c0699000
- <7>[ 0.000000] DMA zone: 408 pages used for memmap
- <7>[ 0.000000] DMA zone: 0 pages reserved
- <7>[ 0.000000] DMA zone: 51816 pages, LIFO batch:15
- <4>[ 0.000000] CPU S3C6410 (id 0x36410101)
- <7>[ 0.000000] s3c6410_init_clocks: initialising clocks
- <6>[ 0.000000] S3C Clocks, (c) 2004 Simtec Electronics
- <7>[ 0.000000] s3c64xx_setup_clocks: registering clocks
- <7>[ 0.000000] s3c64xx_setup_clocks: clkdiv0 = 01053510
- <7>[ 0.000000] s3c64xx_setup_clocks: xtal is 12000000
- <6>[ 0.000000] S3C64XX: PLL settings, A=800000000, M=532000000, E=24000000
- <6>[ 0.000000] S3C64XX: HCLKx2=266666666, HCLK=133333333, PCLK=66666666
- <6>[ 0.000000] mout_apll: source is fout_apll (1), rate is 800000000
- <6>[ 0.000000] mout_epll: source is fout_epll (1), rate is 24000000
- <6>[ 0.000000] mout_mpll: source is mpll (1), rate is 532000000
- <6>[ 0.000000] mmc_bus: source is dout_mpll (1), rate is 266000000
- <6>[ 0.000000] mmc_bus: source is dout_mpll (1), rate is 266000000
- <6>[ 0.000000] mmc_bus: source is dout_mpll (1), rate is 266000000
- <6>[ 0.000000] usb-host-bus: source is mout_epll (0), rate is 24000000
- <6>[ 0.000000] lcd: source is dout_mpll (1), rate is 266000000
- <6>[ 0.000000] uclk1: source is dout_mpll (1), rate is 66500000
- <6>[ 0.000000] spi_epll: source is mout_epll (0), rate is 24000000
- <6>[ 0.000000] spi_epll: source is mout_epll (0), rate is 24000000
- <6>[ 0.000000] sclk_audio0: source is mout_epll (0), rate is 24000000
- <6>[ 0.000000] sclk_audio1: source is mout_epll (0), rate is 24000000
- <6>[ 0.000000] sclk_audio2: source is mout_epll (0), rate is 24000000
- <6>[ 0.000000] irda-bus: source is mout_epll (0), rate is 24000000
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 51816
- <5>[ 0.000000] Kernel command line: console=ttySAC1,115200 root=/dev/ram0 rw ramdisk=1024 init=/init
- <7>[ 0.000000] s3c64xx_init_irq: initialising interrupts
- <4>[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
- <4>[ 0.000326] Console: colour dummy device 80x30
- <6>[ 0.000462] console [ttySAC1] enabled
- <6>[ 0.180602] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>[ 0.189550] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- <6>[ 0.212645] Memory: 204MB = 204MB total
- <5>[ 0.212694] Memory: 199808KB available (3732K code, 2825K data, 152K init)
- <6>[ 0.218485] Calibrating delay loop... 199.47 BogoMIPS (lpj=498688)
- <4>[ 0.315439] Mount-cache hash table entries: 512
- <6>[ 0.317362] CPU: Testing write buffer coherency: ok
- <6>[ 0.324401] net_namespace: 520 bytes
- <6>[ 0.326908] regulator: core version 0.5
- <6>[ 0.329520] NET: Registered protocol family 16
- <4>[ 0.337432] max17044 not exist
- <6>[ 0.339233] s3c-i2c s3c-i2c.0: slave address 0x10
- <6>[ 0.340915] s3c-i2c s3c-i2c.0: bus frequency set to 378 KHz
- <6>[ 0.348182] s3c-i2c s3c-i2c.0: i2c-0: S3C I2C adapter
- <6>[ 0.352142] s3c-i2c s3c-i2c.1: slave address 0x10
- <6>[ 0.356270] s3c-i2c s3c-i2c.1: bus frequency set to 378 KHz
- <1>[ 0.362927] colorbook6410_max8698_init<6>s3c-i2c s3c-i2c.1: i2c-1: S3C I2C adapter
- <4>[ 0.384498] S3C6410 Power Management, (c) 2008 Samsung Electronics
- <4>[ 0.385289] S3C6410: Initialising architecture
- <4>[ 0.389523] S3C DMA-pl080 Controller Driver, (c) 2006-2007 Samsung Electronics
- <4>[ 0.396843] Total 32 DMA channels will be initialized.
- <6>[ 0.405304] i2c /dev entries driver
- <4>[ 0.453491] bio: create slab <bio-0> at 0
- <6>[ 0.455203] regulator: LDO1: 3300 mV fast normal
- <6>[ 0.457725] regulator: LDO2: 1200 mV fast normal
- <6>[ 0.462517] regulator: LDO3: 1200 mV fast normal
- <6>[ 0.466984] regulator: LDO4: 3300 mV fast normal
- <6>[ 0.471942] regulator: LDO5: 3300 mV fast normal
- <6>[ 0.476357] regulator: LDO6: 3300 mV fast normal
- <6>[ 0.481122] regulator: LDO7: 3300 mV fast normal
- <6>[ 0.485904] regulator: LDO8: 3300 mV fast normal
- <6>[ 0.490445] regulator: LDO9: 3300 mV fast normal
- <6>[ 0.496720] usbcore: registered new interface driver usbfs
- <6>[ 0.500551] usbcore: registered new interface driver hub
- <6>[ 0.505524] usbcore: registered new device driver usb
- <7>[ 0.520082] Switched to high resolution mode on CPU 0
- <6>[ 0.522157] NET: Registered protocol family 2
- <6>[ 0.522513] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
- <6>[ 0.528575] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- <6>[ 0.535798] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
- <6>[ 0.541629] TCP: Hash tables configured (established 8192 bind 8192)
- <6>[ 0.547535] TCP reno registered
- <6>[ 0.551068] NET: Registered protocol family 1
- <6>[ 0.555811] checking if image is initramfs... it is
- <6>[ 0.634541] Freeing initrd memory: 156K
- <4>[ 0.635513] S3C PWM Driver, (c) 2006-2007 Samsung Electronics
- <4>[ 0.638897] NetWinder Floating Point Emulator V0.97 (double precision)
- <6>[ 0.655684] ashmem: initialized
- <4>[ 0.658023] yaffs Sep 22 2010 16:49:27 Installing.
- <6>[ 0.658144] msgmni has been set to 391
- <6>[ 0.667227] alg: No test for stdrng (krng)
- <6>[ 0.667416] io scheduler noop registered
- <6>[ 0.669758] io scheduler anticipatory registered (default)
- <6>[ 0.675301] io scheduler deadline registered
- <6>[ 0.679643] io scheduler cfq registered
- <4>[ 0.684596] S3C_LCD clock got enabled :: 266.000 Mhz
- <6>[ 0.695076] LCD TYPE :: CLAA070MA0ACW will be initialized
- <4>[ 0.695127] *************init_gpio**************
- <4>[ 0.835024] Window[0] - FB1: map_video_memory: clear ff000000:003a9800
- <4>[ 0.835987] FB1: map_video_memory: dma=5c800000 cpu=ff000000 size=003a9800
- <4>[ 0.843849] Window[0] - FB2: map_video_memory: clear ff1d4c00:001d4c00
- <4>[ 0.850359] FB2: map_video_memory: dma=5c9d4c00 cpu=ff1d4c00 size=001d4c00
- <4>[ 0.885148] Console: switching to colour frame buffer device 100x37
- <6>[ 0.910447] fb0: s3cfb frame buffer device
- <4>[ 0.929825] Window[1] - FB1: map_video_memory: clear ff3aa000:003a9800
- <4>[ 0.930782] FB1: map_video_memory: dma=5bc00000 cpu=ff3aa000 size=003a9800
- <4>[ 0.938650] Window[1] - FB2: map_video_memory: clear ff57ec00:001d4c00
- <4>[ 0.945156] FB2: map_video_memory: dma=5bdd4c00 cpu=ff57ec00 size=001d4c00
- <6>[ 0.953812] fb1: s3cfb frame buffer device
- <4>[ 0.957194] show logo
- <6>[ 1.187394] LCD power on sequence start
- <6>[ 1.187438] LCD power on sequence end
- <4>[ 1.189832] SMDK board LCD Backlight Device Driver (c) 2008 Samsung Electronics
- <6>[ 1.197429] Registered led device: lcd-backlight
- <6>[ 1.761173] lp: driver loaded but no devices found
- <6>[ 1.761223] S3C64XX ADC driver, (c) 2007 Samsung Electronics
- <6>[ 1.766222] ADC platform data read
- <6>[ 1.769358] ADC presc is 49
- <6>[ 1.772258] ADC delay is 255
- <6>[ 1.775002] ADC resolution is 12
- <6>[ 1.779227] S3C64XX ADC driver successfully probed !
- <6>[ 1.784658] ppdev: user-space parallel port driver
- <6>[ 1.788286] s3c64xx-uart.0: s3c_serial0 at MMIO 0x7f005000 (irq = 16) is a S3C64XX
- <6>[ 1.797022] s3c64xx-uart.1: s3c_serial1 at MMIO 0x7f005400 (irq = 20) is a S3C64XX
- <6>[ 1.804585] s3c64xx-uart.2: s3c_serial2 at MMIO 0x7f005800 (irq = 24) is a S3C64XX
- <6>[ 1.812166] s3c64xx-uart.3: s3c_serial3 at MMIO 0x7f005c00 (irq = 28) is a S3C64XX
- <6>[ 1.841023] brd: module loaded
- <6>[ 1.852105] loop: module loaded
- <6>[ 1.852287] pmem: 1 init
- <6>[ 1.853717] pmem_render: 0 init
- <6>[ 1.856697] pmem_preview: 0 init
- <6>[ 1.859705] pmem_picture: 0 init
- <6>[ 1.862962] pmem_jpeg: 0 init
- <6>[ 1.866348] Linux video capture interface: v2.00
- <4>[ 1.871558] S3C G2D Init : Done
- <6>[ 1.872514] S3C G3D Driver, (c) 2007-2009 Samsung Electronics
- <4>[ 1.879678] s3c_g3d version : 0x1050000
- <4>[ 1.882163] G3D_RESERVED_MEM_SIZE : 32 MB
- <4>[ 1.886085] G3D_CHUNK_SIZE : 2 MB
- <4>[ 1.889328] G3D_CHUNK_NUM : 16 (UI_CHUNK:5)
- <4>[ 1.893530] 0 th virt_addr = 0xce000000, phy_addr = 0x5e000000
- <4>[ 1.899341] 1 th virt_addr = 0xce200000, phy_addr = 0x5e200000
- <4>[ 1.905148] 2 th virt_addr = 0xce400000, phy_addr = 0x5e400000
- <4>[ 1.910950] 3 th virt_addr = 0xce600000, phy_addr = 0x5e600000
- <4>[ 1.916760] 4 th virt_addr = 0xce800000, phy_addr = 0x5e800000
- <4>[ 1.922564] 5 th virt_addr = 0xcea00000, phy_addr = 0x5ea00000
- <4>[ 1.928374] 6 th virt_addr = 0xcec00000, phy_addr = 0x5ec00000
- <4>[ 1.934184] 7 th virt_addr = 0xcee00000, phy_addr = 0x5ee00000
- <4>[ 1.939988] 8 th virt_addr = 0xcf000000, phy_addr = 0x5f000000
- <4>[ 1.945806] 9 th virt_addr = 0xcf200000, phy_addr = 0x5f200000
- <4>[ 1.951612] 10 th virt_addr = 0xcf400000, phy_addr = 0x5f400000
- <4>[ 1.957502] 11 th virt_addr = 0xcf600000, phy_addr = 0x5f600000
- <4>[ 1.963396] 12 th virt_addr = 0xcf800000, phy_addr = 0x5f800000
- <4>[ 1.969292] 13 th virt_addr = 0xcfa00000, phy_addr = 0x5fa00000
- <4>[ 1.975194] 14 th virt_addr = 0xcfc00000, phy_addr = 0x5fc00000
- <4>[ 1.981085] 15 th virt_addr = 0xcfe00000, phy_addr = 0x5fe00000
- <6>[ 1.987477] S3C6400 MFC Driver, (c) 2007 Samsung Electronics
- <4>[ 1.997487] S3C6400 MFC driver module init OK.
- <6>[ 1.997537] S3C PostProcessor Driver v3.12, (c) 2009 Samsung Electronics
- <6>[ 2.005652] S3C JPEG Driver, (c) 2007 Samsung Electronics
- <6>[ 2.011993] S3C CMM Driver, (c) 2008 Samsung Electronics
- <6>[ 2.016860] OneNAND: generic_onenand_probe - (Virt) Base Address: 0xD1200000
- <6>[ 2.021456] onenand_probe: Use four bases (128K, 16M, 16M, 256K)
- <7>[ 2.027892] OneNAND Manufacturer: Samsung (0xec)
- <6>[ 2.027918] Muxed OneNAND(DDP) 512MB 1.8V 16-bit (0x58)
- <6>[ 2.032603] OneNAND version = 0x0121
- <7>[ 2.036142] Chip support all block unlock
- <6>[ 2.175587] Scanning device for bad blocks
- <5>[ 4.103213] Creating 8 MTD partitions on "onenand":
- <5>[ 4.103259] 0x000000000000-0x000000200000 : "bootloader"
- <5>[ 4.111476] 0x000000200000-0x000000a00000 : "kernel"
- <5>[ 4.115723] 0x000000a00000-0x000000b00000 : "id"
- <5>[ 4.120207] 0x000000b00000-0x000001500000 : "recovery"
- <5>[ 4.125337] 0x000001500000-0x000001800000 : "ramdisk"
- <5>[ 4.130370] 0x000001800000-0x00000e000000 : "system"
- <5>[ 4.136170] 0x00000e000000-0x000014400000 : "cache"
- <5>[ 4.140548] 0x000014400000-0x000020000000 : "userdata"
- <5>[ 4.146574] usbmon: debugfs is not available
- <6>[ 4.146621] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- <4>[ 4.152969] usb_hcd_s3c2410_probe:init host clk
- <6>[ 4.157619] s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
- <6>[ 4.162848] s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
- <6>[ 4.169972] s3c2410-ohci s3c2410-ohci: irq 79, io mem 0x74300000
- <6>[ 4.235644] usb usb1: configuration #1 chosen from 1 choice
- <6>[ 4.236456] hub 1-0:1.0: USB hub found
- <6>[ 4.239419] hub 1-0:1.0: 2 ports detected
- <4>[ 4.247732] [S3C USB-OTG MODE] : DMA
- <4>[ 4.249854] [ADB_UMS_ACM] string_dev = PD_Novel
- <6>[ 4.251558] mass_storage_function_add
- <6>[ 4.257170] android_usb gadget: 1.Number of LUNs=2
- <6>[ 4.259885] adb_function_add
- <6>[ 4.263929] android_usb gadget: Android Composite USB, version: Sep 22 2010
- <6>[ 4.269776] android_usb gadget: android_usb ready
- <4>[ 4.274392] Registered gadget driver 'android_usb'
- <6>[ 4.281335] mice: PS/2 mouse device common for all mice
- <6>[ 4.285807] input: gpio-keys as /class/input/input0
- <6>[ 4.290915] S3C Touchscreen driver, (c) 2009 Samsung Electronics
- <4>[ 4.310625] TS ID item found
- <4>[ 4.325745] TS ID item found
- <4>[ 4.355949] TS ID value is valid
- <6>[ 4.356207] S3C TouchScreen got loaded successfully : 12 bits
- <6>[ 4.360778] input: S3C TouchScreen as /class/input/input1
- <6>[ 4.369491] input: angle-switch as /class/input/input2
- <4>[ 4.371963] S3C RTC, (c) 2004,2006 Simtec Electronics
- <4>[ 4.374931] s3c_rtc: tick irq 34, alarm irq 92
- <6>[ 4.379322] s3c-rtc s3c-rtc: rtc disabled, re-enabling
- <6>[ 4.387436] s3c-rtc s3c-rtc: rtc core: registered s3c as rtc0
- <6>[ 4.391224] s3c_bat_init
- <6>[ 4.392721] smdk6410-battery smdk6410-battery: s3c_bat_probe
- <6>[ 4.597400] cpuidle: using governor ladder
- <6>[ 4.597449] cpuidle: using governor menu
- <6>[ 4.600368] sdhci: Samsung S3C6410 SD/MMC driver
- <6>[ 4.604594] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133333333 Hz)
- <6>[ 4.611126] s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133333333 Hz)
- <6>[ 4.617620] s3c-sdhci s3c-sdhci.0: clock source 2: hsmmc (133333333 Hz)
- <6>[ 4.624994] Registered led device: mmc0
- <6>[ 4.628633] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using DMA
- <6>[ 4.635314] s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133333333 Hz)
- <6>[ 4.641594] s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133333333 Hz)
- <6>[ 4.648160] s3c-sdhci s3c-sdhci.1: clock source 2: hsmmc (133333333 Hz)
- <4>[ 4.655091] [s3c_udc_cable_connect]
- <6>[ 4.658215] android_usb gadget: high speed config #1: UMS Only (Not debugging mode)
- <6>[ 4.667088] Registered led device: mmc1
- <6>[ 4.670311] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using DMA
- <6>[ 4.682500] usbcore: registered new interface driver usbhid
- <6>[ 4.682585] usbhid: v2.6:USB HID core driver
- <6>[ 4.688950] logger: created 64K log 'log_main'
- <6>[ 4.692211] logger: created 256K log 'log_events'
- <6>[ 4.700206] logger: created 64K log 'log_radio'
- <6>[ 4.703440] Advanced Linux Sound Architecture Driver Version 1.0.18a.
- <4>[ 4.714626] No device for DAI SSM2602
- <4>[ 4.714679] No device for DAI s3c-i2s
- <6>[ 4.717230] ssm2602 Audio Codec 0.1<6>asoc: SSM2602 <-> s3c-i2s mapping ok
- <3>[ 4.724165] dapm: SSM2602: configuring unknown pin Headphone Jack
- <3>[ 4.729362] dapm: SSM2602: configuring unknown pin Mic1 Jack
- <3>[ 4.734949] dapm: SSM2602: configuring unknown pin Line In Jack
- <6>[ 4.749895] ALSA device list:
- <6>[ 4.749937] #0: SMDK6410 (SSM2602)
- <6>[ 4.751210] TCP cubic registered
- <6>[ 4.754006] NET: Registered protocol family 17
- <6>[ 4.758559] NET: Registered protocol family 15
- <6>[ 4.763649] RPC: Registered udp transport module.
- <6>[ 4.767845] RPC: Registered tcp transport module.
- <6>[ 4.772790] mmc0: new high speed SDHC card at address 0001
- <6>[ 4.780424] mmcblk0: mmc0:0001 00000 3.73 GiB
- <6>[ 4.782447] mmcblk0:share region kernel: reserved 4096 bytes at 0xCD0A0000
- <4>[ 4.789310] share region: computed residue = 0xdebb20e3, checksum = 0xba8439a5
- <4>[ 4.796327] share region: passed
- <6>[ 4.799492] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
- <4>[ 4.807379] p1
- <6>[ 4.866009] mmc1: new SD card at address b319
- <6>[ 4.867131] mmcblk1: mmc1:b319 SU02G 1.84 GiB
- <6>[ 4.869524] mmcblk1: p1
- <4>[ 5.499121] this time bat_staus is 4
- <6>[ 7.815131] s3c-rtc s3c-rtc: setting system clock to 2011-12-11 18:13:35 UTC (1323627215)
- <6>[ 7.817808] Freeing init memory: 152K
- <3>[ 7.836510] init: /init.rc: 30: invalid command 'echo'
- <3>[ 7.837179] init: /init.rc: 118: invalid command 'rm'
- <3>[ 7.841182] init: /init.rc: 118: invalid command 'ln'
- <3>[ 7.846741] init: /init.rc: 167: invalid command 'class_reset'
- <3>[ 7.852075] init: /init.rc: 171: invalid command 'class_reset'
- <3>[ 7.857794] init: /init.rc: 171: invalid command 'class_reset'
- <3>[ 7.863978] init: /init.rc: 213: group option accepts at most 6 supp. groups
- <3>[ 7.870747] init: /init.rc: 213: invalid option 'ioprio'
- <3>[ 7.876306] init: /init.rc: 253: invalid option 'filecheck.sh'
- <3>[ 7.882610] init: cannot find '/sbin/ueventd', disabling 'ueventd'
- <6>[ 9.037551] yaffs: dev is 32505861 name is "mtdblock5"
- <6>[ 9.037595] yaffs: passed flags ""
- <4>[ 9.040533] yaffs: Attempting MTD mount on 31.5, "mtdblock5"
- <4>[ 9.402791] yaffs: restored from checkpoint
- <4>[ 9.403284] yaffs_read_super: isCheckpointed 1
- <6>[ 9.407027] yaffs: dev is 32505863 name is "mtdblock7"
- <6>[ 9.410964] yaffs: passed flags ""
- <4>[ 9.414270] yaffs: Attempting MTD mount on 31.7, "mtdblock7"
- <4>[ 9.452488] yaffs: restored from checkpoint
- <4>[ 9.452737] yaffs_read_super: isCheckpointed 1
- <6>[ 9.465275] yaffs: dev is 32505862 name is "mtdblock6"
- <6>[ 9.465318] yaffs: passed flags ""
- <4>[ 9.468163] yaffs: Attempting MTD mount on 31.6, "mtdblock6"
- <4>[ 9.484797] yaffs: restored from checkpoint
- <4>[ 9.484913] yaffs_read_super: isCheckpointed 1
- <3>[ 9.723456] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
- <3>[ 9.864208] init: cannot execve('/system/bin/'): Permission denied
- <6>[ 10.343189] android_usb gadget: high speed config #1: UMS + ADB (Debugging mode)
- <4>[ 15.156684] rt3070sta: module license 'RALINK' taints kernel.
- <4>[ 16.827586] usb1 init
- <4>[ 16.827622] rtusb init --->
- <6>[ 16.828840] usbcore: registered new interface driver rt2870
- <6>[ 17.705170] usb 1-1: new full speed USB device using s3c2410-ohci and address 2
- <6>[ 17.962401] usb 1-1: configuration #1 chosen from 1 choice
- <4>[ 17.997891]
- <4>[ 17.997899]
- <4>[ 17.997903] === pAd = cd302000, size = 930824 ===
- <4>[ 17.997911]
- <4>[ 18.007661] <-- RTMPAllocAdapterBlock, Status=0
- <6>[ 18.020710] ra0 (usb): not using net_device_ops yet
- <6>[ 33.132612] warning: `zygote' uses 32-bit capabilities (legacy support in use)
- <4>[ 34.390127] RTC_SYNC: save delta sec:0 nsec:575011632
- <6>[ 56.101086] LCD power off sequence start
- <6>[ 56.101137] LCD power off sequence end
- <4>[ 56.103443] this is state_store<6>request_suspend_state: wakeup (3->0) at 55926145457 (2011-12-11 18:14:23.791058087 UTC)
- <6>[ 56.130894] LCD power on sequence start
- <6>[ 56.130943] LCD power on sequence end
- <3>[ 58.397014] init: no such service 'dhcpcd_:-h android-2be6a6b9fda3f002 '
- <4>[ 63.336505] <-- RTMPAllocTxRxRingMemory, Status=0
- <4>[ 63.394728] -->RTUSBVenderReset
- <4>[ 63.396726] <--RTUSBVenderReset
- <4>[ 64.594748] pAd->StaCfg.bAutoReconnect = 1, RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP) = 0
- <4>[ 65.770751] pAd->StaCfg.bAutoReconnect = 1, RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP) = 0
- <4>[ 67.046949] pAd->StaCfg.bAutoReconnect = 1, RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP) = 0
- <4>[ 68.248768] pAd->StaCfg.bAutoReconnect = 1, RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP) = 0
- <4>[ 68.603893] RtmpOSFileOpen(): Error 2 opening /etc/Wireless/RT2870STA/RT2870STA.dat
- <4>[ 68.606013] Open file "/etc/Wireless/RT2870STA/RT2870STA.dat" failed!
- <4>[ 68.612390] 1. Phy Mode = 0
- <4>[ 68.615150] ERROR!!! RTMPReadParametersHook failed, Status[=0x00000001]
- <4>[ 69.690836] ---> RTMPFreeTxRxRingMemory
- <4>[ 69.691324] <--- RTMPFreeTxRxRingMemory
- <4>[ 69.692910] !!! rt28xx Initialized fail !!!
- <4>[ 70.377207] /home/wan/c1/wifi/wifi_code/MODULE/os/linux/../../sta/sta_cfg.c:2019 assert rvfailed
- <6>[ 105.454482] binder: release 1963:1966 transaction 5002 out, still active
- <6>[ 105.456424] binder: 1944:2088 transaction failed 29189, size8-0
- <6>[ 105.461596] binder: send failed reply for transaction 5002, target dead
- <6>[ 114.183647] binder: 1944:1979 transaction failed 29189, size96-0
- <6>[ 115.205910] binder: 2276:2288 transaction failed 29189, size288-0
- <6>[ 125.197288] binder: 2276:2287 transaction failed 29189, size288-0
- <4>[ 169.095221] <-- RTMPAllocTxRxRingMemory, Status=0
- <4>[ 169.131226] -->RTUSBVenderReset
- <4>[ 169.133213] <--RTUSBVenderReset
- <4>[ 169.863242] pAd->StaCfg.bAutoReconnect = 1, RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP) = 0
- <4>[ 171.056255] pAd->StaCfg.bAutoReconnect = 1, RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP) = 0
- <4>[ 172.223242] pAd->StaCfg.bAutoReconnect = 1, RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP) = 0
- <4>[ 173.388258] pAd->StaCfg.bAutoReconnect = 1, RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP) = 0
- <4>[ 173.951407] RtmpOSFileOpen(): Error 2 opening /etc/Wireless/RT2870STA/RT2870STA.dat
- <4>[ 173.953490] Open file "/etc/Wireless/RT2870STA/RT2870STA.dat" failed!
- <4>[ 173.959914] 1. Phy Mode = 0
- <4>[ 173.962665] ERROR!!! RTMPReadParametersHook failed, Status[=0x00000001]
- <4>[ 174.100368] ---> RTMPFreeTxRxRingMemory
- <4>[ 174.100885] <--- RTMPFreeTxRxRingMemory
- <4>[ 174.102394] !!! rt28xx Initialized fail !!!
- <4>[ 335.989807] <-- RTMPAllocTxRxRingMemory, Status=0
- <4>[ 336.028990] -->RTUSBVenderReset
- <4>[ 336.030997] <--RTUSBVenderReset
- <4>[ 336.697017] pAd->StaCfg.bAutoReconnect = 1, RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP) = 0
- <4>[ 337.864019] pAd->StaCfg.bAutoReconnect = 1, RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP) = 0
- <4>[ 339.029024] pAd->StaCfg.bAutoReconnect = 1, RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP) = 0
- <4>[ 340.222028] pAd->StaCfg.bAutoReconnect = 1, RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP) = 0
- <4>[ 340.863109] RtmpOSFileOpen(): Error 2 opening /etc/Wireless/RT2870STA/RT2870STA.dat
- <4>[ 340.865221] Open file "/etc/Wireless/RT2870STA/RT2870STA.dat" failed!
- <4>[ 340.871621] 1. Phy Mode = 0
- <4>[ 340.874323] ERROR!!! RTMPReadParametersHook failed, Status[=0x00000001]
- <4>[ 341.020416] ---> RTMPFreeTxRxRingMemory
- <4>[ 341.020960] <--- RTMPFreeTxRxRingMemory
- <4>[ 341.022441] !!! rt28xx Initialized fail !!!
Add Comment
Please, Sign In to add comment