Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 5.4.36 (cheche@casa) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13138-3a79e3b185)) #0 SMP Sun May 3 17:31:30 2020
- [ 0.000000] Detected Broadcom 0x6368 CPU revision b2
- [ 0.000000] CPU frequency is 400 MHz
- [ 0.000000] 64MB of RAM installed
- [ 0.000000] board_bcm963xx: Boot address 0xb8000000
- [ 0.000000] board_bcm963xx: CFE version: 1.0.37-107.23
- [ 0.000000] printk: bootconsole [early0] enabled
- [ 0.000000] CPU0 revision is: 0002a031 (Broadcom BMIPS4350)
- [ 0.000000] board: board name: P870HNU-51b
- [ 0.000000] MIPS: machine is Zyxel P870HNU-51b
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
- [ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
- [ 0.000000] On node 0 totalpages: 16384
- [ 0.000000] Normal zone: 144 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
- [ 0.000000] percpu: Embedded 14 pages/cpu s26032 r8192 d23120 u57344
- [ 0.000000] pcpu-alloc: s26032 r8192 d23120 u57344 alloc=14*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16240
- [ 0.000000] Kernel command line: rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
- [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 56880K/65536K available (5061K kernel code, 203K rwdata, 1112K rodata, 1296K init, 201K bss, 8656K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.000000] NR_IRQS: 256
- [ 0.000000] genirq: irq_chip bcm6345-periph-intc did not update eff. affinity mask of irq 28
- [ 0.000000] random: get_random_bytes called from start_kernel+0x338/0x568 with crng_init=0
- [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
- [ 0.000014] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
- [ 0.008138] Calibrating delay loop... 397.82 BogoMIPS (lpj=795648)
- [ 0.046462] pid_max: default: 32768 minimum: 301
- [ 0.051550] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.059092] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.072184] rcu: Hierarchical SRCU implementation.
- [ 0.078374] smp: Bringing up secondary CPUs ...
- [ 0.084683] SMP: Booting CPU1...
- [ 3.401972] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
- [ 3.401989] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
- [ 3.402246] CPU1 revision is: 0002a031 (Broadcom BMIPS4350)
- [ 0.116170] Synchronize counters for CPU 1:
- [ 0.116189] SMP: CPU1 is running
- [ 0.116211] done.
- [ 0.146721] smp: Brought up 1 node, 2 CPUs
- [ 0.159111] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.169142] futex hash table entries: 512 (order: 1, 8192 bytes, linear)
- [ 0.176412] pinctrl core: initialized pinctrl subsystem
- [ 0.182814] NET: Registered protocol family 16
- [ 0.209280] registering PCI controller with io_map_base unset
- [ 0.260981] PCI host bridge to bus 0000:00
- [ 0.265215] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
- [ 0.272274] pci_bus 0000:00: root bus resource [io 0x8000000-0x800ffff]
- [ 0.279160] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
- [ 0.286143] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- [ 0.294457] pci 0000:00:01.0: [14e4:a8d6] type 00 class 0x028000
- [ 0.302664] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x00003fff]
- [ 0.316705] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
- [ 0.323529] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x30003fff]
- [ 0.338118] clocksource: Switched to clocksource MIPS
- [ 0.346095] b43-pci-bridge 0000:00:01.0: enabling device (0000 -> 0002)
- [ 0.382922] ssb: Found chip with id 0xA8D6, rev 0x00 and package 0x08
- [ 0.434528] ssb: WARNING: Using fallback SPROM failed (err -2)
- [ 0.442729] b43-pci-bridge 0000:00:01.0: Failed to register PCI version of SSB with error -2
- [ 0.451922] b43-pci-bridge: probe of 0000:00:01.0 failed with error -2
- [ 0.459121] NET: Registered protocol family 2
- [ 0.465015] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
- [ 0.473840] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.481800] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
- [ 0.489123] TCP: Hash tables configured (established 1024 bind 1024)
- [ 0.496134] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
- [ 0.502856] random: fast init done
- [ 0.506426] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
- [ 0.514266] NET: Registered protocol family 1
- [ 0.518877] PCI: CLS 0 bytes, default 16
- [ 0.527760] workingset: timestamp_bits=14 max_order=14 bucket_order=0
- [ 0.548606] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.554628] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.596313] bcm6368-pinctrl 10000080.pin-controller: registered at mmio (ptrval)
- [ 0.604994] 10000100.serial: ttyS0 at MMIO 0x10000100 (irq = 10, base_baud = 1562500) is a bcm63xx_uart
- [ 0.614738] printk: console [ttyS0] enabled
- [ 0.623328] printk: bootconsole [early0] disabled
- [ 0.642000] physmap-flash 18000000.nor: physmap platform flash device: [mem 0x18000000-0x19ffffff]
- [ 0.651427] 18000000.nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e
- [ 0.661718] 18000000.nor: Found an alias at 0x1000000 for the chip at 0x0
- [ 0.661788] Amd/Fujitsu Extended Query Table at 0x0040
- [ 0.667060] Amd/Fujitsu Extended Query version 1.3.
- [ 0.672236] number of CFI chips: 1
- [ 0.677219] Searching for RedBoot partition table in 18000000.nor at offset 0xfe0000
- [ 0.718993] No RedBoot partition table detected in 18000000.nor
- [ 0.725327] 3 fixed-partitions partitions found on MTD device 18000000.nor
- [ 0.732396] Creating 3 MTD partitions on "18000000.nor":
- [ 0.737852] 0x000000000000-0x000000020000 : "CFE"
- [ 0.744605] 0x000000020000-0x000001000000 : "linux"
- [ 0.751682] parser_imagetag: rootfs: CFE image tag found at 0x0 with version 6, board type 96368MVWG
- [ 0.761125] parser_imagetag: Partition 0 is kernel offset 100 and length 203984
- [ 0.768617] parser_imagetag: Partition 1 is rootfs offset 203a84 and length ddc57c
- [ 0.776407] parser_imagetag: Spare partition is offset 430004 and length bafffc
- [ 0.784003] 2 bcm963xx-imagetag partitions found on MTD device linux
- [ 0.790530] Creating 2 MTD partitions on "linux":
- [ 0.795367] 0x000000000100-0x000000203a84 : "kernel"
- [ 0.802294] 0x000000203a84-0x000000fe0000 : "rootfs"
- [ 0.809023] mtd: device 3 (rootfs) set to be root filesystem
- [ 0.814896] 1 squashfs-split partitions found on MTD device rootfs
- [ 0.821253] 0x000000440000-0x000000fe0000 : "rootfs_data"
- [ 0.828578] 0x000000fe0000-0x000000ff0000 : "nvram"
- [ 0.848603] bcm63xx-spi 10000800.spi: at [mem 0x10000800-0x10000f0b flags 0x200] (irq 9, FIFOs size 542)
- [ 0.860122] libphy: Fixed MDIO Bus: probed
- [ 0.906667] b53_common: found switch: BCM63xx, rev 0
- [ 0.912309] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
- [ 0.920563] leds-gpio leds-gpio.0: Skipping unavailable LED gpio 0 ((null))
- [ 0.927766] leds-gpio leds-gpio.0: Skipping unavailable LED gpio 0 ((null))
- [ 0.934909] leds-gpio leds-gpio.0: Skipping unavailable LED gpio 0 ((null))
- [ 0.942076] leds-gpio leds-gpio.0: Skipping unavailable LED gpio 0 ((null))
- [ 0.949241] leds-gpio leds-gpio.0: Skipping unavailable LED gpio 0 ((null))
- [ 0.958739] NET: Registered protocol family 10
- [ 0.976232] Segment Routing with IPv6
- [ 0.980253] NET: Registered protocol family 17
- [ 0.984901] 8021q: 802.1Q VLAN Support v1.8
- [ 0.996561] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
- [ 1.018577] Freeing unused kernel memory: 1296K
- [ 1.023225] This architecture does not have kernel memory protection.
- [ 1.029828] Run /sbin/init as init process
- [ 1.944012] init: Console is alive
- [ 1.947873] init: - watchdog -
- [ 3.230273] kmodloader: loading kernel modules from /etc/modules-boot.d/*
- [ 3.353275] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
- [ 3.365360] init: - preinit -
- [ 4.488434] random: jshn: uninitialized urandom read (4 bytes read)
- [ 4.556417] random: jshn: uninitialized urandom read (4 bytes read)
- [ 4.750066] random: jshn: uninitialized urandom read (4 bytes read)
- [ 5.409401] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
- [ 5.416282] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port1, 100Mbps, full-duplex
- [ 5.555340] urandom_read: 2 callbacks suppressed
- [ 5.555359] random: procd: uninitialized urandom read (4 bytes read)
- [ 6.413819] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 9.931512] jffs2: notice: (444) jffs2_build_xattr_subsystem: complete building xattr subsystem, 11 of xdatum (0 unchecked, 5 orphan) and 22 of xref (5 dead, 0 orphan) found.
- [ 9.949472] mount_root: switching to jffs2 overlay
- [ 9.995262] overlayfs: upper fs does not support tmpfile.
- [ 10.007921] urandom-seed: Seeding with /etc/urandom.seed
- [ 10.207546] procd: - early -
- [ 10.210751] procd: - watchdog -
- [ 10.866784] procd: - watchdog -
- [ 10.870460] procd: - ubus -
- [ 10.918381] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 11.013427] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 11.020622] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 11.028726] procd: - init -
- [ 11.946703] kmodloader: loading kernel modules from /etc/modules.d/*
- [ 12.081195] Loading modules backported from Linux version v5.4.27-0-g585e0cc08069
- [ 12.088986] Backport generated by backports.git v5.4.27-1-0-gf6e8852f
- [ 12.135415] xt_time: kernel timezone is -0000
- [ 12.334557] PPP generic driver version 2.4.2
- [ 12.342175] NET: Registered protocol family 24
- [ 12.382156] urngd: v1.0.2 started.
- [ 12.386345] Broadcom 43xx driver loaded [ Features: PNL ]
- [ 12.400853] kmodloader: done loading kernel modules from /etc/modules.d/*
- [ 12.650483] random: crng init done
- [ 12.653973] random: 1 urandom warning(s) missed due to ratelimiting
- [ 23.946624] br-lan: port 1(eth0.1) entered blocking state
- [ 23.952275] br-lan: port 1(eth0.1) entered disabled state
- [ 23.958463] device eth0.1 entered promiscuous mode
- [ 23.963439] device eth0 entered promiscuous mode
- [ 23.973603] br-lan: port 1(eth0.1) entered blocking state
- [ 23.979213] br-lan: port 1(eth0.1) entered forwarding state
- [ 24.942738] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
- [ 25.998071] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port1, 100Mbps, full-duplex
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement