Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2021.10-armbian (Jun 01 2023 - 17:35:46 +0800)
- pmic id is 0x4b
- DRAM: 1024 MiB
- Trying to boot from MMC1
- NOTICE: BL31: v2.9(debug):c0d8ee386-dirty
- NOTICE: BL31: Built : 17:35:38, Jun 1 2023
- NOTICE: BL31: Detected Allwinner H616 SoC (1823)
- NOTICE: BL31: Found U-Boot DTB at 0x4a082d60, model: MangoPi Mcore
- INFO: ARM GICv2 driver initialized
- INFO: Configuring SPC Controller
- INFO: PMIC: Probing AXP305 on RSB
- ERROR: RSB: set run-time address: 0x10003
- INFO: Could not init RSB: -65539
- INFO: BL31: Platform setup done
- INFO: BL31: Initializing runtime services
- INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
- INFO: BL31: cortex_a53: CPU workaround for 1530924 was applied
- INFO: PSCI: Suspend is unavailable
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0x4a000000
- INFO: SPSR = 0x3c9
- INFO: Changed devicetree.
- U-Boot 2021.10-armbian (Jun 01 2023 - 17:35:46 +0800) Allwinner Technology
- CPU: Allwinner H616 (SUN50I)
- Model: MangoPi Mcore
- I2C: ready
- DRAM: 1 GiB
- MMC: mmc@4020000: 0
- Loading Environment from FAT... Unable to use mmc 0:1... In: serial@5000000
- Out: serial@5000000
- Err: serial@5000000
- Net: phy interface6
- eth0: ethernet@5030000
- Autoboot in 1 seconds, press <Space> to stop
- switch to partitions #0, OK
- mmc0 is current device
- Scanning mmc 0:1...
- Found U-Boot script /boot/boot.scr
- 3202 bytes read in 6 ms (520.5 KiB/s)
- ## Executing script at 4fc00000
- U-boot loaded from SD
- Boot script loaded from mmc
- 227 bytes read in 5 ms (43.9 KiB/s)
- 33777 bytes read in 12 ms (2.7 MiB/s)
- Failed to load '/boot/dtb/allwinner/overlay/-fixup.scr'
- 11007115 bytes read in 467 ms (22.5 MiB/s)
- 22333448 bytes read in 938 ms (22.7 MiB/s)
- Moving Image from 0x40080000 to 0x40200000, end=417c0000
- ## Loading init Ramdisk from Legacy Image at 4ff00000 ...
- Image Name: uInitrd
- Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
- Data Size: 11007051 Bytes = 10.5 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 4fa00000
- Booting using the fdt blob at 0x4fa00000
- Loading Ramdisk to 49580000, end 49fff44b ... OK
- Loading Device Tree to 000000004950f000, end 000000004957ffff ... OK
- Starting kernel ...
- [ 1.266090] debugfs: Directory '5096000.codec' with parent 'H616 Audio Codec' already present!
- [ 1.306568] sunxi-hdmi soc:hdmi-audio@1: snd_soc_register_card failed
- [ 1.396213] spi-nor spi0.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff
- [ 1.616603] sunxi-hdmi soc:hdmi-audio@1: snd_soc_register_card failed
- [ 1.625194] sunxi-hdmi soc:hdmi-audio@1: snd_soc_register_card failed
- [ 1.633049] sunxi-hdmi soc:hdmi-audio@1: snd_soc_register_card failed
- [ 1.678426] sunxi-hdmi soc:hdmi-audio@1: snd_soc_register_card failed
- [ 2.175450] sunxi-hdmi soc:hdmi-audio@1: snd_soc_register_card failed
- [ 2.183750] sunxi-hdmi soc:hdmi-audio@1: snd_soc_register_card failed
- [ 2.195215] sunxi-hdmi soc:hdmi-audio@1: snd_soc_register_card failed
- [ 2.218728] axp2101-regulator axp2101-regulator.0: Setting DCDC frequency for unsupported AXP variant
- [ 2.228063] axp2101-regulator axp2101-regulator.0: Error setting dcdc frequency: -22
- [ 2.262631] sunxi-hdmi soc:hdmi-audio@1: snd_soc_register_card failed
- [ 2.296822] debugfs: Directory '1100000.mixer' with parent 'regmap' already present!
- [ 2.304697] debugfs: Directory '1100000.mixer' with parent 'regmap' already present!
- Debian GNU/Linux 12 DietPi ttyS0
- DietPi login: dietpi
- Password:
- Login incorrect
- DietPi login: root
- Password:
- Linux DietPi 5.19.4-sunxi64 #22.08.2 SMP Thu Jun 1 17:42:13 CST 2023 aarch64
- The programs included with the Debian GNU/Linux system are free software;
- the exact distribution terms for each program are described in the
- individual files in /usr/share/doc/*/copyright.
- Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
- permitted by applicable law.
- ─────────────────────────────────────────────────────
- DietPi v9.0.2 : 18:59 - Fri 02/16/24
- ─────────────────────────────────────────────────────
- - LAN IP : Use dietpi-config to setup a connection (eth0)
- DietPi-Update
- ─────────────────────────────────────────────────────
- Phase: Checking for available DietPi update
- [FAILED] DietPi-Update | Checking IPv4 network connectivity
- - Command: ping -4nc 1 -W 10 IP
- Generic Device (aarch64)───────┤ DietPi-Update ├───────────────────────────────┐
- │ Checking IPv4 network connectivity │
- │ - Command: ping -4nc 1 -W 10 9.9.9.9 │
- │ - Exit code: 2 │
- │ - DietPi version: v9.0.2 (MichaIng/master) | HW_MODEL: 22 | HW_ARCH: 3 | │
- │ DISTRO: 7 │
- │ - Image creator: Vasco │
- │ - Pre-image: MangoH618_bulleye │
- │ - Error log: │
- │ ping: connect: Network is unreachable │
- │ │
- │ Retry : Re-run the last command that failed ↑ │
- │ Double timeout : Retry with doubled timeout for ping to wait for a ▮ │
- │ Change IPv4 address : Change the IPv4 address used for this test ▒ │
- │ Network settings : Enter dietpi-config network options ▒ │
- │ DietPi-Config : Edit network, APT/NTP mirror settings etc ▒ │
- │ Open subshell : Open a subshell to investigate or solve the issue ▒ │
- │ Send report : Uploads bugreport containing system info to DietPi ▒ │
- │ ●─ Devs only ─────────────────────────────────────── ↓ │
- │ │
- │ │
- │ <Ok> <Exit> │
- │ │
- └──────────────────────────────────────────────────────────────────────────────┘┘
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement