esp sensor

esphome:
  name: airing-cupboard-1-esp8266
  platform: ESP8266
  board: nodemcuv2

# Enable logging
logger:

# Enable Home Assistant API
api:

ota:
  password: !secret ota_password

wifi:
  networks:
  - ssid: !secret wifi_ssid
    password: !secret wifi_password
#  - ssid: !secret wifi_ssid_pc
#    password: !secret wifi_password_pc
  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: !secret fallback_ssid
    password: !secret fallback_password

captive_portal:
web_server:
  port: 80

# Example configuration entry
dallas:
  - pin: D7
    update_interval: 5s
sensor:
  - platform: dallas
    address: 0xA50000062B669628
    name: "Tank Top Temp"
  - platform: dallas
    address: 0xB90000062A94B628
    name: "Tank Bottom Temp"
  - platform: dallas
    address: 0xFB0000062BC98528
    name: "Pump Flow Temp"
  - platform: dallas
    address: 0xE70000062BCE3828
    name: "Pump Return Temp"
  - platform: dallas
    address: 0xa200000628157128
    name: "Underfloor Flow Temp"
  - platform: dallas
    address: 0x4f0000062bdf6928
    name: "Underfloor Return Temp"

button:
  - platform: restart
    name: "Reboot"

switch:
  - platform: gpio
    pin:
      number: D2
      inverted: true
    id: relay1
    name: "Cold Port"
    icon: "mdi:valve-closed"
  - platform: gpio
    pin:
      number: D2
      inverted: true
    id: relay2
    name: "Warm Port"
    icon: "mdi:valve"
  - platform: gpio
    pin:
      number: D6
      inverted: true
    id: relay3
    name: "Hot Port"
    icon: "mdi:valve-open"
  - platform: gpio
    pin:
      number: D5
      inverted: true
    id: relay4
    name: "Hot Water Pump"
    icon: "mdi:water-pump"

  # update in every loop() iteration