API tools faq
paste
Advertisement
Guest User

vega22

a guest
Jan 27th, 2023
48
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 20.12 KB | None | 0 0
raw download clone embed print report
  1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2023.01.27 10:24:26 =~=~=~=~=~=~=~=~=~=~=~=
  2.  
  3. U-Boot SPL 2013.10 (Apr 06 2021 - 06:44:08)
  4. CORE_AM335x_v3 module configuration
  5. The Expected Linux image was not found. Please check your NAND configuration.
  6. Trying to start u-boot now...
  7.  
  8.  
  9. U-Boot 2013.10 (Apr 06 2021 - 06:44:08)
  10.  
  11. I2C: ready
  12. DRAM: 256 MiB
  13. NAND: 256 MiB
  14. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
  15. Net: Could not get PHY for cpsw: addr 0
  16.  
  17. Devname: cpsw
  18.  
  19. PHY Identifier Register #2 = a211
  20.  
  21. cpsw, usb_ether
  22. Hit any key to stop autoboot: 3  2  1  0
  23. Card did not respond to voltage select!
  24. mmc0(part 0) is current device
  25. Scanning mmc 0...
  26. Card did not respond to voltage select!
  27. ** Bad device mmc 0 **
  28. Card did not respond to voltage select!
  29. mmc0(part 0) is current device
  30. Card did not respond to voltage select!
  31. Card did not respond to voltage select!
  32. mmc1(part 0) is current device
  33. Card did not respond to voltage select!
  34. Booting from nand ...
  35.  
  36. NAND read: device 0 offset 0x80000, size 0x40000
  37. 262144 bytes read: OK
  38.  
  39. NAND read: device 0 offset 0x200000, size 0x800000
  40. nand: bit-flip corrected @data=386
  41. nand: bit-flip corrected @data=391
  42. nand: bit-flip corrected @data=151
  43. nand: bit-flip corrected @data=199
  44. 8388608 bytes read: OK
  45. Kernel image @ 0x80200000 [ 0x000000 - 0x3d61d8 ]
  46. ## Flattened Device Tree blob at 80f80000
  47. Booting using the fdt blob at 0x80f80000
  48. Loading Device Tree to 8f320000, end 8f32bc48 ... OK
  49.  
  50. Starting kernel ...
  51.  
  52. [ 0.000000] Booting Linux on physical CPU 0x0
  53. [ 0.000000] Linux version 3.12.10-ti2013.12.01 (root@alexander-VirtualBox) (gcc version 4.7.3 20130226 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.03-20130313 - Linaro GCC 2013.03) ) #1 Sat May 18 17:44:30 +07 2019
  54. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
  55. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  56. [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: VEGA-BS-AM335x
  57. [ 0.000000] cma: CMA: reserved 24 MiB at 8d800000
  58. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  59. [ 0.000000] CPU: All CPU(s) started in SVC mode.
  60. [ 0.000000] AM335X ES2.1 (neon )
  61. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64256
  62. [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048 rootfstype=ubifs rootwait=1
  63. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  64. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  65. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  66. [ 0.000000] Memory: 223668K/259072K available (5415K kernel code, 553K rwdata, 1836K rodata, 329K init, 210K bss, 35404K reserved, 0K highmem)
  67. [ 0.000000] Virtual kernel memory layout:
  68. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  69. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  70. [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
  71. [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
  72. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  73. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  74. [ 0.000000] .text : 0xc0008000 - 0xc071d08c (7253 kB)
  75. [ 0.000000] .init : 0xc071e000 - 0xc0770554 ( 330 kB)
  76. [ 0.000000] .data : 0xc0772000 - 0xc07fc558 ( 554 kB)
  77. [ 0.000000] .bss : 0xc07fc558 - 0xc0830e40 ( 211 kB)
  78. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  79. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
  80. [ 0.000000] Total of 128 interrupts on 1 active controller
  81. [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
  82. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  83. [ 0.000000] OMAP clocksource: timer1 at 24000000 Hz
  84. [ 0.000000] Console: colour dummy device 80x30
  85. [ 0.000586] Calibrating delay loop... 199.06 BogoMIPS (lpj=995328)
  86. [ 0.069408] pid_max: default: 32768 minimum: 301
  87. [ 0.069599] Security Framework initialized
  88. [ 0.069691] Mount-cache hash table entries: 512
  89. [ 0.087509] CPU: Testing write buffer coherency: ok
  90. [ 0.088141] Setting up static identity map for 0xc054ff28 - 0xc054ff98
  91. [ 0.089849] devtmpfs: initialized
  92. [ 0.093824] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  93. [ 0.167608] omap_hwmod: debugss: _wait_target_disable failed
  94. [ 0.168801] pinctrl core: initialized pinctrl subsystem
  95. [ 0.170484] regulator-dummy: no parameters
  96. [ 0.174671] NET: Registered protocol family 16
  97. [ 0.179623] DMA: preallocated 256 KiB pool for atomic coherent allocations
  98. [ 0.184745] cpuidle: using governor ladder
  99. [ 0.184777] cpuidle: using governor menu
  100. [ 0.205402] platform mpu.1: FIXME: clock-name 'fck' DOES NOT exist in dt!
  101. [ 0.207695] platform 49000000.edma: FIXME: clock-name 'fck' DOES NOT exist in dt!
  102. [ 0.208777] omap_gpio 44e07000.gpio: could not find pctldev for node /pinmux@44e10800/mygpio0_pins_default, deferring probe
  103. [ 0.208833] platform 44e07000.gpio: Driver omap_gpio requests probe deferral
  104. [ 0.209530] omap_gpio 4804c000.gpio: could not find pctldev for node /pinmux@44e10800/mygpio1_pins_default, deferring probe
  105. [ 0.209578] platform 4804c000.gpio: Driver omap_gpio requests probe deferral
  106. [ 0.210224] omap_gpio 481ac000.gpio: could not find pctldev for node /pinmux@44e10800/mygpio2_pins_default, deferring probe
  107. [ 0.210270] platform 481ac000.gpio: Driver omap_gpio requests probe deferral
  108. [ 0.210921] omap_gpio 481ae000.gpio: could not find pctldev for node /pinmux@44e10800/mygpio3_pins_default, deferring probe
  109. [ 0.210965] platform 481ae000.gpio: Driver omap_gpio requests probe deferral
  110. [ 0.223182] omap-gpmc 50000000.gpmc: could not find pctldev for node /pinmux@44e10800/nandflash_pins_s0, deferring probe
  111. [ 0.223239] platform 50000000.gpmc: Driver omap-gpmc requests probe deferral
  112. [ 0.224067] platform 56000000.sgx: FIXME: clock-name 'fck' DOES NOT exist in dt!
  113. [ 0.227626] DSS not supported on this SoC
  114. [ 0.227654] No ATAGs?
  115. [ 0.227676] hw-breakpoint: debug architecture 0x4 unsupported.
  116. [ 0.284188] bio: create slab <bio-0> at 0
  117. [ 0.316744] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
  118. [ 0.318401] vmmcsd_fixed: 3300 mV
  119. [ 0.326833] SCSI subsystem initialized
  120. [ 0.329832] usbcore: registered new interface driver usbfs
  121. [ 0.330239] usbcore: registered new interface driver hub
  122. [ 0.330688] usbcore: registered new device driver usb
  123. [ 0.332620] omap_i2c 44e0b000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c0_pins, deferring probe
  124. [ 0.332674] platform 44e0b000.i2c: Driver omap_i2c requests probe deferral
  125. [ 0.333140] media: Linux media interface: v0.10
  126. [ 0.333537] Linux video capture interface: v2.00
  127. [ 0.334128] pps_core: LinuxPPS API ver. 1 registered
  128. [ 0.334152] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  129. [ 0.334448] PTP clock support registered
  130. [ 0.339996] Switched to clocksource timer1
  131. [ 0.382339] NET: Registered protocol family 2
  132. [ 0.383722] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  133. [ 0.383848] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  134. [ 0.383919] TCP: Hash tables configured (established 2048 bind 2048)
  135. [ 0.384058] TCP: reno registered
  136. [ 0.384088] UDP hash table entries: 256 (order: 0, 4096 bytes)
  137. [ 0.384136] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  138. [ 0.384511] NET: Registered protocol family 1
  139. [ 0.385117] RPC: Registered named UNIX socket transport module.
  140. [ 0.385142] RPC: Registered udp transport module.
  141. [ 0.385158] RPC: Registered tcp transport module.
  142. [ 0.385174] RPC: Registered tcp NFSv4.1 backchannel transport module.
  143. [ 0.386937] NetWinder Floating Point Emulator V0.97 (double precision)
  144. [ 0.388106] PM: Loading am335x-pm-firmware.bin
  145. [ 0.741112] VFS: Disk quotas dquot_6.5.2
  146. [ 0.741265] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  147. [ 0.742389] NFS: Registering the id_resolver key type
  148. [ 0.742519] Key type id_resolver registered
  149. [ 0.742540] Key type id_legacy registered
  150. [ 0.742639] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  151. [ 0.743039] msgmni has been set to 484
  152. [ 0.746545] NET: Registered protocol family 38
  153. [ 0.746620] io scheduler noop registered
  154. [ 0.746639] io scheduler deadline registered
  155. [ 0.746685] io scheduler cfq registered (default)
  156. [ 0.750659] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
  157. [ 0.757184] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  158. [ 0.762751] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0
  159. [ 1.454491] console [ttyO0] enabled
  160. [ 1.459689] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89, base_baud = 3000000) is a OMAP UART1
  161. [ 1.472269] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
  162. [ 1.501748] brd: module loaded
  163. [ 1.516690] loop: module loaded
  164. [ 1.528647] mtdoops: mtd device (mtddev=name/number) must be supplied
  165. [ 1.539708] edma-dma-engine edma-dma-engine.0: allocated channel for 0:43
  166. [ 1.547101] edma-dma-engine edma-dma-engine.0: allocated channel for 0:42
  167. [ 1.562256] PPP generic driver version 2.4.2
  168. [ 1.567730] PPP BSD Compression module registered
  169. [ 1.572820] PPP Deflate Compression module registered
  170. [ 1.578309] PPP MPPE Compression module registered
  171. [ 1.583470] NET: Registered protocol family 24
  172. [ 1.588682] usbcore: registered new interface driver zd1201
  173. [ 1.595134] usbcore: registered new interface driver asix
  174. [ 1.601357] usbcore: registered new interface driver ax88179_178a
  175. [ 1.608285] usbcore: registered new interface driver cdc_ether
  176. [ 1.614861] usbcore: registered new interface driver r815x
  177. [ 1.621145] usbcore: registered new interface driver smsc95xx
  178. [ 1.627687] usbcore: registered new interface driver net1080
  179. [ 1.634074] usbcore: registered new interface driver cdc_subset
  180. [ 1.640805] usbcore: registered new interface driver zaurus
  181. [ 1.647306] usbcore: registered new interface driver cdc_ncm
  182. [ 1.654328] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  183. [ 1.661355] ehci-pci: EHCI PCI platform driver
  184. [ 1.666495] ehci-omap: OMAP-EHCI Host Controller driver
  185. [ 1.673942] usbcore: registered new interface driver cdc_acm
  186. [ 1.680046] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  187. [ 1.688984] usbcore: registered new interface driver cdc_wdm
  188. [ 1.695511] usbcore: registered new interface driver usb-storage
  189. [ 1.702860] usbcore: registered new interface driver usbserial
  190. [ 1.709502] usbcore: registered new interface driver option
  191. [ 1.715791] usbserial: USB Serial support registered for GSM modem (1-port)
  192. [ 1.725465] mousedev: PS/2 mouse device common for all mice
  193. [ 1.734595] input: ti-tsc as /devices/ocp.2/44e0d000.tscadc/TI-am335x-tsc/input/input0
  194. [ 1.747606] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
  195. [ 1.755367] 44e3e000.rtc: already running
  196. [ 1.761521] i2c /dev entries driver
  197. [ 1.766407] Driver for 1-wire Dallas network protocol.
  198. [ 1.776566] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  199. [ 1.787223] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
  200. [ 1.794998] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
  201. [ 1.841378] platform leds.3: Driver leds-gpio requests probe deferral
  202. [ 1.852269] ledtrig-cpu: registered to indicate activity on CPUs
  203. [ 1.859398] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
  204. [ 1.867185] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
  205. [ 1.876247] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
  206. [ 1.883970] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
  207. [ 1.891214] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
  208. [ 1.901555] usbcore: registered new interface driver usbhid
  209. [ 1.907510] usbhid: USB HID core driver
  210. [ 1.916609] oprofile: no performance counters
  211. [ 1.922177] oprofile: using timer interrupt.
  212. [ 1.927643] TCP: cubic registered
  213. [ 1.931238] Initializing XFRM netlink socket
  214. [ 1.935920] NET: Registered protocol family 17
  215. [ 1.941091] NET: Registered protocol family 15
  216. [ 1.945910] 8021q: 802.1Q VLAN Support v1.8
  217. [ 1.950427] lib80211: common routines for IEEE802.11 drivers
  218. [ 1.956968] Key type dns_resolver registered
  219. [ 1.962687] cpu cpu0: cpu0 regulator not ready, retry
  220. [ 1.968100] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests probe deferral
  221. [ 1.977406] ThumbEE CPU extension supported.
  222. [ 1.987159] OMAP GPIO hardware version 0.1
  223. [ 1.997932] omap-gpmc 50000000.gpmc: GPMC revision 6.0
  224. [ 2.003498] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
  225. [ 2.011923] ONFI param page 0 valid
  226. [ 2.015649] ONFI flash detected
  227. [ 2.019008] NAND device: Manufacturer ID: 0xc2, Chip ID: 0xda (Macronix MX30LF2G18AC), 256MiB, page size: 2048, OOB size: 64
  228. [ 2.031315] omap2-nand: detected x8 NAND flash
  229. [ 2.036041] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
  230. [ 2.041771] omap2-nand: using custom ecc layout
  231. [ 2.047389] 10 ofpart partitions found on MTD device omap2-nand.0
  232. [ 2.053928] Creating 10 MTD partitions on "omap2-nand.0":
  233. [ 2.060050] 0x000000000000-0x000000020000 : "NAND.SPL"
  234. [ 2.068672] 0x000000020000-0x000000040000 : "NAND.SPL.backup1"
  235. [ 2.078287] 0x000000040000-0x000000060000 : "NAND.SPL.backup2"
  236. [ 2.087837] 0x000000060000-0x000000080000 : "NAND.SPL.backup3"
  237. [ 2.097069] 0x000000080000-0x0000000c0000 : "NAND.u-boot-spl-os"
  238. [ 2.107012] 0x0000000c0000-0x0000001c0000 : "NAND.u-boot"
  239. [ 2.116955] 0x0000001c0000-0x0000001e0000 : "NAND.u-boot-env"
  240. [ 2.126191] 0x0000001e0000-0x000000200000 : "NAND.u-boot-env.backup1"
  241. [ 2.136504] 0x000000200000-0x000000a00000 : "NAND.kernel"
  242. [ 2.152362] 0x000000a00000-0x000010000000 : "NAND.file-system"
  243. [ 2.383096] DCDC1: at 1500 mV
  244. [ 2.389560] vdd_core: 1100 mV
  245. [ 2.394362] vdd_mpu: 925 <--> 1350 mV at 1275 mV
  246. [ 2.401222] LDO1: at 1800 mV
  247. [ 2.405813] LDO2: at 3300 mV
  248. [ 2.411146] LDO3: 1800 mV
  249. [ 2.415787] LDO4: at 3300 mV
  250. [ 2.420154] tps65217 0-0024: TPS65217 ID 0xe version 1.2
  251. [ 2.425865] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
  252. [ 2.438600] UBI: attaching mtd9 to ubi0
  253. [ 2.706895] UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 394:0, read only 64 bytes, retry
  254. [ 3.770329] UBI: scanning is finished
  255. [ 3.790723] UBI: attached mtd9 (name "NAND.file-system", size 246 MiB) to ubi0
  256. [ 3.798426] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  257. [ 3.806000] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
  258. [ 3.813061] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
  259. [ 3.820708] UBI: good PEBs: 1968, bad PEBs: 0, corrupted PEBs: 0
  260. [ 3.827091] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
  261. [ 3.835006] UBI: max/mean erase counter: 18/3, WL threshold: 4096, image sequence number: 145352975
  262. [ 3.844642] UBI: available PEBs: 0, total reserved PEBs: 1968, PEBs reserved for bad PEB handling: 40
  263. [ 3.854783] UBI: background thread "ubi_bgt0d" started, PID 786
  264. [ 3.920082] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
  265. [ 3.926591] davinci_mdio 4a101000.mdio: detected phy mask fffffffd
  266. [ 3.934613] libphy: 4a101000.mdio: probed
  267. [ 3.938904] davinci_mdio 4a101000.mdio: phy[1]: device 4a101000.mdio:01, driver unknown
  268. [ 3.949100] Detected MACID = 78:5e:e8:20:05:a7
  269. [ 3.957238] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:19:25 UTC (946685965)
  270. [ 3.992300] UBIFS: background thread "ubifs_bgt0_0" started, PID 798
  271. [ 4.018356] UBIFS: recovery needed
  272. [ 4.087980] UBI warning: ubi_io_read: error -74 (ECC error) while reading 10240 bytes from PEB 394:120832, read only 10240 bytes, retry
  273. [ 4.102911] UBI warning: ubi_io_read: error -74 (ECC error) while reading 10240 bytes from PEB 394:120832, read only 10240 bytes, retry
  274. [ 4.117808] UBI warning: ubi_io_read: error -74 (ECC error) while reading 10240 bytes from PEB 394:120832, read only 10240 bytes, retry
  275. [ 4.132692] UBI error: ubi_io_read: error -74 (ECC error) while reading 10240 bytes from PEB 394:120832, read 10240 bytes
  276. [ 4.144684] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.10-ti2013.12.01 #1
  277. [ 4.152109] Backtrace:
  278. [ 4.154767] [<c0017880>] (dump_backtrace+0x0/0x10c) from [<c0017a1c>] (show_stack+0x18/0x1c)
  279. [ 4.164094] r6:cd29e000 r5:00002800 r4:ffffffb6 r3:00000000
  280. [ 4.170202] [<c0017a04>] (show_stack+0x0/0x1c) from [<c0548750>] (dump_stack+0x20/0x28)
  281. [ 4.179072] [<c0548730>] (dump_stack+0x0/0x28) from [<c0364a34>] (ubi_io_read+0x128/0x2ec)
  282. [ 4.187919] [<c036490c>] (ubi_io_read+0x0/0x2ec) from [<c0362298>] (ubi_eba_read_leb+0x174/0x428)
  283. [ 4.197701] [<c0362124>] (ubi_eba_read_leb+0x0/0x428) from [<c0361818>] (ubi_leb_read+0xb0/0x124)
  284. [ 4.207179] [<c0361768>] (ubi_leb_read+0x0/0x124) from [<c01fdde8>] (ubifs_leb_read+0x2c/0x90)
  285. [ 4.216654] r8:cd358000 r7:00000273 r6:0001c800 r5:00002800 r4:cd35b280
  286. [ 4.223874] [<c01fddbc>] (ubifs_leb_read+0x0/0x90) from [<c0205b34>] (ubifs_start_scan+0x74/0xec)
  287. [ 4.233626] r7:00000273 r6:d093b000 r5:0001c800 r4:cd35b280
  288. [ 4.239700] [<c0205ac0>] (ubifs_start_scan+0x0/0xec) from [<c0217594>] (ubifs_recover_leb+0x64/0x7fc)
  289. [ 4.249817] r8:cd35b288 r7:cd3b7f80 r6:00000000 r5:00002800 r4:cd35891c
  290. [ 4.257028] [<c0217530>] (ubifs_recover_leb+0x0/0x7fc) from [<c02070b4>] (ubifs_replay_journal+0xc20/0x15f4)
  291. [ 4.267817] [<c0206494>] (ubifs_replay_journal+0x0/0x15f4) from [<c01fb860>] (ubifs_mount+0xe70/0x1674)
  292. [ 4.277846] [<c01fa9f0>] (ubifs_mount+0x0/0x1674) from [<c00d46d4>] (mount_fs+0x4c/0x18c)
  293. [ 4.286885] [<c00d4688>] (mount_fs+0x0/0x18c) from [<c00eb648>] (vfs_kern_mount+0x54/0xc8)
  294. [ 4.295713] [<c00eb5f4>] (vfs_kern_mount+0x0/0xc8) from [<c00ed4d4>] (do_mount+0x1c8/0x8c8)
  295. [ 4.304911] r8:c07c5604 r7:cd35ba40 r6:00000000 r5:00008000 r4:c07cc49c
  296. r3:00000000
  297. [ 4.313332] [<c00ed30c>] (do_mount+0x0/0x8c8) from [<c00edc60>] (SyS_mount+0x8c/0xc0)
  298. [ 4.322007] [<c00edbd4>] (SyS_mount+0x0/0xc0) from [<c071ef6c>] (mount_block_root+0x108/0x240)
  299. [ 4.331181] r7:c0758f1c r6:cd34e000 r5:00008000 r4:cd34e000
  300. [ 4.337559] [<c071ee64>] (mount_block_root+0x0/0x240) from [<c071f354>] (prepare_namespace+0x94/0x1cc)
  301. [ 4.347491] [<c071f2c0>] (prepare_namespace+0x0/0x1cc) from [<c071ec1c>] (kernel_init_freeable+0x178/0x1bc)
  302. [ 4.358155] r5:00000007 r4:c0770348
  303. [ 4.362034] [<c071eaa4>] (kernel_init_freeable+0x0/0x1bc) from [<c0543408>] (kernel_init+0x10/0xec)
  304. [ 4.372020] [<c05433f8>] (kernel_init+0x0/0xec) from [<c00146f8>] (ret_from_fork+0x14/0x3c)
  305. [ 4.380918] r4:00000000 r3:00000000
  306. [ 4.385165] UBIFS error (pid 1): ubifs_recover_leb: corrupt empty space LEB 627:116736, corruption starts at 2783
  307. [ 4.396098] UBIFS error (pid 1): ubifs_scanned_corruption: corruption at LEB 627:119519
  308. [ 4.404928] UBIFS error (pid 1): ubifs_scanned_corruption: first 7457 bytes from LEB 627:119519
  309. [ 4.424486] UBIFS error (pid 1): ubifs_recover_leb: LEB 627 scanning failed
  310. [ 4.432350] UBIFS: background thread "ubifs_bgt0_0" stops
  311. [ 4.439261] VFS: Cannot open root device "ubi0:rootfs" or unknown-block(0,0): error -117
  312. [ 4.448282] Please append a correct "root=" boot option; here are the available partitions:
  313. [ 4.457283] 1f00 128 mtdblock0 (driver?)
  314. [ 4.463042] 1f01 128 mtdblock1 (driver?)
  315. [ 4.468447] 1f02 128 mtdblock2 (driver?)
  316. [ 4.473883] 1f03 128 mtdblock3 (driver?)
  317. [ 4.479566] 1f04 256 mtdblock4 (driver?)
  318. [ 4.484979] 1f05 1024 mtdblock5 (driver?)
  319. [ 4.490389] 1f06 128 mtdblock6 (driver?)
  320. [ 4.496079] 1f07 128 mtdblock7 (driver?)
  321. [ 4.501493] 1f08 8192 mtdblock8 (driver?)
  322. [ 4.506873] 1f09 251904 mtdblock9 (driver?)
  323. [ 4.512586] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!