API tools faq
paste
Advertisement
Guest User

kernel log error archlinux boot wandboard

a guest
Jul 15th, 2013
517
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 19.40 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2013.07-rc1-dirty (Jul 01 2013 - 23:10:47)
  2.  
  3.  
  4. CPU: Freescale i.MX6Q rev1.2 at 792 MHz
  5.  
  6. Reset cause: POR
  7.  
  8. Board: Wandboard
  9.  
  10. DRAM: 2 GiB
  11.  
  12. MMC: FSL_SDHC: 0, FSL_SDHC: 1
  13.  
  14. *** Warning - bad CRC, using default environment
  15.  
  16.  
  17. In: serial
  18.  
  19. Out: serial
  20.  
  21. Err: serial
  22.  
  23. Net: FEC [PRIME]
  24.  
  25. Warning: FEC using MAC address from net device
  26.  
  27.  
  28. Hit any key to stop autoboot: 1  0
  29.  
  30. mmc0 is current device
  31.  
  32. SD/MMC found on device 0
  33.  
  34. 470 bytes read in 26 ms (17.6 KiB/s)
  35.  
  36. Importing environment from mmc (uEnv.txt)...
  37.  
  38. Running uenvcmd ...
  39.  
  40. 2619004 bytes read in 211 ms (11.8 MiB/s)
  41.  
  42.  
  43. Starting kernel ...
  44.  
  45.  
  46. [ 0.000000] Initializing cgroup subsys cpuset
  47. [ 0.000000] Initializing cgroup subsys cpu
  48. [ 0.000000] Linux version 3.0.35-wand5.2 (liber@ice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #1 SMP PREEMPT Mon Jul 15 00:00:30 CEST 2013
  49. [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
  50. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  51. [ 0.000000] Machine: Wandboard
  52. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  53. [ 0.000000] CPU identified as i.MX6Q, silicon rev 1.2
  54. [ 0.000000] On node 0 totalpages: 479232
  55. [ 0.000000] free_area_init_node: node 0, pgdat c072c060, node_mem_map d0000000
  56. [ 0.000000] DMA zone: 368 pages used for memmap
  57. [ 0.000000] DMA zone: 0 pages reserved
  58. [ 0.000000] DMA zone: 46736 pages, LIFO batch:15
  59. [ 0.000000] Normal zone: 976 pages used for memmap
  60. [ 0.000000] Normal zone: 78896 pages, LIFO batch:15
  61. [ 0.000000] HighMem zone: 2752 pages used for memmap
  62. [ 0.000000] HighMem zone: 349504 pages, LIFO batch:31
  63. [ 0.000000] PERCPU: Embedded 7 pages/cpu @d100e000 s6560 r8192 d13920 u32768
  64. [ 0.000000] pcpu-alloc: s6560 r8192 d13920 u32768 alloc=8*4096
  65. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  66. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 475136
  67. [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 rw init=/usr/lib/systemd/systemd debug rootfstype=ext3 rootwait fixrtc video=hdmi,1920x1080M@60,if=RGB24,bpp=32
  68. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  69. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  70. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  71. [ 0.000000] allocated 8388608 bytes of page_cgroup
  72. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  73. [ 0.000000] Memory: 80MB 1792MB = 1872MB total
  74. [ 0.000000] Memory: 1884148k/1884148k available, 213004k reserved, 1409024K highmem
  75. [ 0.000000] Virtual kernel memory layout:
  76. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  77. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  78. [ 0.000000] DMA : 0xf4600000 - 0xffe00000 ( 184 MB)
  79. [ 0.000000] vmalloc : 0xea800000 - 0xf2000000 ( 120 MB)
  80. [ 0.000000] lowmem : 0xc0000000 - 0xea000000 ( 672 MB)
  81. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  82. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  83. [ 0.000000] .init : 0xc0008000 - 0xc003d000 ( 212 kB)
  84. [ 0.000000] .text : 0xc003d000 - 0xc06ee000 (6852 kB)
  85. [ 0.000000] .data : 0xc06ee000 - 0xc072d1a0 ( 253 kB)
  86. [ 0.000000] .bss : 0xc072d1c4 - 0xc0771f78 ( 276 kB)
  87. [ 0.000000] Preemptible hierarchical RCU implementation.
  88. [ 0.000000] Verbose stalled-CPUs detection is disabled.
  89. [ 0.000000] NR_IRQS:496
  90. [ 0.000000] MXC GPIO hardware
  91. [ 0.000000] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms
  92. [ 0.000000] arm_max_freq=1GHz
  93. [ 0.000000] MXC_Early serial console at MMIO 0x2020000 (options '115200')
  94. [ 0.000000] bootconsole [ttymxc0] enabled
  95. [ 0.000000] Console: colour dummy device 80x30
  96. [ 0.291892] Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)
  97. [ 0.380035] pid_max: default: 32768 minimum: 301
  98. [ 0.384947] Mount-cache hash table entries: 512
  99. [ 0.390304] Initializing cgroup subsys cpuacct
  100. [ 0.394821] Initializing cgroup subsys memory
  101. [ 0.399229] Initializing cgroup subsys devices
  102. [ 0.403728] Initializing cgroup subsys freezer
  103. [ 0.408294] CPU: Testing write buffer coherency: ok
  104. [ 0.413488] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  105. [ 0.514135] CPU1: Booted secondary processor
  106. [ 0.594136] CPU2: Booted secondary processor
  107. [ 0.674126] CPU3: Booted secondary processor
  108. [ 0.713548] Brought up 4 CPUs
  109. [ 0.729383] SMP: Total of 4 processors activated (6324.22 BogoMIPS).
  110. [ 0.736411] devtmpfs: initialized
  111. [ 0.765448] print_constraints: dummy:
  112. [ 0.769478] NET: Registered protocol family 16
  113. [ 0.775209] print_constraints: vddpu: 725 <--> 1300 mV at 1150 mV fast normal
  114. [ 0.782590] print_constraints: vddcore: 725 <--> 1300 mV at 1150 mV fast normal
  115. [ 0.790188] print_constraints: vddsoc: 725 <--> 1300 mV at 1200 mV fast normal
  116. [ 0.797686] print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal
  117. [ 0.805268] print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal
  118. [ 0.812730] print_constraints: vdd3p0: 2625 <--> 3400 mV at 3000 mV fast normal
  119. [ 0.895134] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  120. [ 0.901950] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
  121. [ 0.909329] hw-breakpoint: maximum watchpoint size is 4 bytes.
  122. [ 0.915245] L310 cache controller enabled
  123. [ 0.919280] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x02070000, Cache size: 1048576 B
  124. [ 0.934500] bio: create slab <bio-0> at 0
  125. [ 0.939065] print_constraints: VDDA: 2500 mV
  126. [ 0.943581] print_constraints: VDDIO: 3300 mV
  127. [ 0.948246] vgaarb: loaded
  128. [ 0.951445] SCSI subsystem initialized
  129. [ 0.955300] libata version 3.00 loaded.
  130. [ 0.959416] spi_imx imx6q-ecspi.0: probed
  131. [ 0.963664] spi_imx imx6q-ecspi.1: probed
  132. [ 0.967936] usbcore: registered new interface driver usbfs
  133. [ 0.973523] usbcore: registered new interface driver hub
  134. [ 0.978949] usbcore: registered new device driver usb
  135. [ 1.003526] imx-ipuv3 imx-ipuv3.0: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
  136. [ 1.011458] Advanced Linux Sound Architecture Driver Version 1.0.24.
  137. [ 1.018445] Switching to clocksource mxc_timer1
  138. [ 1.031698] NET: Registered protocol family 2
  139. [ 1.036382] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  140. [ 1.044330] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  141. [ 1.052592] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  142. [ 1.060467] TCP: Hash tables configured (established 65536 bind 65536)
  143. [ 1.067035] TCP reno registered
  144. [ 1.070199] UDP hash table entries: 256 (order: 1, 8192 bytes)
  145. [ 1.076087] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  146. [ 1.082949] NET: Registered protocol family 1
  147. [ 1.087859] RPC: Registered named UNIX socket transport module.
  148. [ 1.093822] RPC: Registered udp transport module.
  149. [ 1.098543] RPC: Registered tcp transport module.
  150. [ 1.103287] RPC: Registered tcp NFSv4.1 backchannel transport module.
  151. [ 1.109756] PCI: CLS 0 bytes, default 32
  152. [ 1.113914] _regulator_get: etb supply vcore not found, using dummy regulator
  153. [ 1.121359] _regulator_get: etm.0 supply vcore not found, using dummy regulator
  154. [ 1.128802] _regulator_get: etm.1 supply vcore not found, using dummy regulator
  155. [ 1.136266] _regulator_get: etm.2 supply vcore not found, using dummy regulator
  156. [ 1.143693] _regulator_get: etm.3 supply vcore not found, using dummy regulator
  157. [ 1.151197] Static Power Management for Freescale i.MX6
  158. [ 1.156461] wait mode is disabled for i.MX6
  159. [ 1.160751] cpaddr = ea880000 suspend_iram_base=ea874000
  160. [ 1.166186] PM driver module loaded
  161. [ 1.884863] link up failed, DB_R0:0x00af2a00, DB_R1:0x08200000!
  162. [ 1.890806] IMX PCIe port: link down with power supply 0!
  163. [ 1.896447] IMX usb wakeup probe
  164. [ 1.899782] the wakeup pdata is 0xe9dedce0
  165. [ 1.904136] IMX usb wakeup probe
  166. [ 1.907460] the wakeup pdata is 0xe9dedb20
  167. [ 1.911766] cpu regulator init ldo=0
  168. [ 1.915578] i.MXC CPU frequency driver
  169. [ 1.919775] audit: initializing netlink socket (disabled)
  170. [ 1.925236] type=2000 audit(1.620:1): initialized
  171. [ 2.030613] highmem bounce pool size: 64 pages
  172. [ 2.035320] ashmem: initialized
  173. [ 2.038845] VFS: Disk quotas dquot_6.5.2
  174. [ 2.042974] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  175. [ 2.050096] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  176. [ 2.056275] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  177. [ 2.063175] fuse init (API version 7.16)
  178. [ 2.067547] Btrfs loaded
  179. [ 2.070102] msgmni has been set to 927
  180. [ 2.074599] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  181. [ 2.082020] io scheduler noop registered
  182. [ 2.085971] io scheduler deadline registered
  183. [ 2.090302] io scheduler cfq registered (default)
  184. [ 2.095771] mxc_sdc_fb mxc_sdc_fb.0: register mxc display driver hdmi
  185. [ 2.102273] mxc_hdmi mxc_hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1
  186. [ 2.143112] imx-ipuv3 imx-ipuv3.0: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
  187. [ 2.223889] Console: switching to colour frame buffer device 240x67
  188. [ 2.264300] mxc_sdc_fb mxc_sdc_fb.1: register mxc display driver ldb
  189. [ 2.270698] _regulator_get: get() with no identifier
  190. [ 2.281546] imx-sdma imx-sdma: loaded firmware 1.1
  191. [ 2.288422] imx-sdma imx-sdma: initialized
  192. [ 2.292741] Serial: IMX driver
  193. [ 2.295901] imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
  194. [ 2.302383] console [ttymxc0] enabled, bootconsole disabled
  195. [ 2.302383] console [ttymxc0] enabled, bootconsole disabled
  196. [ 2.313764] imx-uart.2: ttymxc2 at MMIO 0x21ec000 (irq = 60) is a IMX
  197. [ 2.320624] [drm] Initialized drm 1.1.0 20060810
  198. [ 2.325563] [drm] Initialized vivante 1.0.0 20120216 on minor 0
  199. [ 2.373031] No sata disk.
  200. [ 2.375727] FEC Ethernet Driver
  201. [ 2.379559] fec_enet_mii_bus: probed
  202. [ 2.383852] usbmon: debugfs is not available
  203. [ 2.388127] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  204. [ 2.394772] add wake up source irq 72
  205. [ 2.398478] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
  206. [ 2.405198] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 1
  207. [ 2.433047] fsl-ehci fsl-ehci.1: irq 72, io base 0x02184200
  208. [ 2.453041] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
  209. [ 2.459031] hub 1-0:1.0: USB hub found
  210. [ 2.462794] hub 1-0:1.0: 1 port detected
  211. [ 2.466947] add wake up source irq 75
  212. [ 2.473661] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
  213. [ 2.480300] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 2
  214. [ 2.513045] fsl-ehci fsl-ehci.0: irq 75, io base 0x02184000
  215. [ 2.533038] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
  216. [ 2.538994] hub 2-0:1.0: USB hub found
  217. [ 2.542757] hub 2-0:1.0: 1 port detected
  218. [ 2.546931] Initializing USB Mass Storage driver...
  219. [ 2.551902] usbcore: registered new interface driver usb-storage
  220. [ 2.557925] USB Mass Storage support registered.
  221. [ 2.562617] ARC USBOTG Device Controller driver (1 August 2005)
  222. [ 2.568627] udc: request mem region for fsl-usb2-udc failed
  223. [ 2.574310] fsl-usb2-udc: probe of fsl-usb2-udc failed with error -16
  224. [ 2.580896] mousedev: PS/2 mouse device common for all mice
  225. [ 2.586673] i2c /dev entries driver
  226. [ 2.590465] Linux video capture interface: v2.00
  227. [ 2.595279] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video16
  228. [ 2.602777] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video17
  229. [ 2.610293] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video18
  230. [ 2.618030] cpuidle: using governor ladder
  231. [ 2.622131] cpuidle: using governor menu
  232. [ 2.626103] sdhci: Secure Digital Host Controller Interface driver
  233. [ 2.632287] sdhci: Copyright(c) Pierre Ossman
  234. [ 2.636769] _regulator_get: sdhci-esdhc-imx.2 supply vmmc not found, using dummy regulator
  235. [ 2.645222] mmc0: SDHCI controller on platform [sdhci-esdhc-imx.2] using DMA
  236. [ 2.653346] _regulator_get: sdhci-esdhc-imx.1 supply vmmc not found, using dummy regulator
  237. [ 2.663743] mmc1: SDHCI controller on platform [sdhci-esdhc-imx.1] using DMA
  238. [ 2.670842] sdhci sdhci-esdhc-imx.0: no write-protect pin available!
  239. [ 2.677241] _regulator_get: sdhci-esdhc-imx.0 supply vmmc not found, using dummy regulator
  240. [ 2.685635] mmc2: SDHCI controller on platform [sdhci-esdhc-imx.0] using DMA
  241. [ 2.694852] mxc_vdoa mxc_vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
  242. [ 2.704648] VPU initialized
  243. [ 2.708131] mxc_asrc registered
  244. [ 2.731944] Thermal calibration data is 0x5814f169
  245. [ 2.736765] Thermal sensor with ratio = 182
  246. [ 2.753041] Anatop Thermal registered as thermal_zone0
  247. [ 2.758268] anatop_thermal_probe: default cooling device is cpufreq!
  248. [ 2.764827] usbcore: registered new interface driver usbhid
  249. [ 2.770403] usbhid: USB HID core driver
  250. [ 2.774259] zram: num_devices not specified. Using default: 1
  251. [ 2.780011] zram: Creating 1 devices ...
  252. [ 2.784692] mxc_hdmi_soc mxc_hdmi_soc.0: MXC HDMI Audio
  253. [ 2.789991] mxc_spdif mxc_spdif.0: MXC SPDIF Audio
  254. [ 2.796050] _regulator_get: 1-000a supply VDDD not found, using dummy regulator
  255. [ 2.803693] sgtl5000 1-000a: sgtl5000 revision 17
  256. [ 2.808500] print_constraints: 1-000a: 850 <--> 1600 mV at 1200 mV normal
  257. [ 2.923236] mmc0: new high speed SDHC card at address 0001
  258. [ 2.929352] mmcblk0: mmc0:0001 00000 29.2 GiB
  259. [ 2.939307] mmcblk0: p1 p2
  260. [ 2.944378] asoc: sgtl5000 <-> imx-ssi.1 mapping ok
  261. [ 2.950705] asoc: mxc-spdif <-> imx-spdif-dai.0 mapping ok
  262. [ 2.957442] asoc: mxc-hdmi-soc <-> imx-hdmi-soc-dai.0 mapping ok
  263. [ 2.963935] ALSA device list:
  264. [ 2.966907] #0: sgtl5000-audio
  265. [ 2.970136] #1: imx-spdif
  266. [ 2.972931] #2: imx-hdmi-soc
  267. [ 2.976881] TCP cubic registered
  268. [ 2.980247] NET: Registered protocol family 10
  269. [ 2.991172] NET: Registered protocol family 17
  270. [ 2.995770] Registering the dns_resolver key type
  271. [ 3.002991] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  272. [ 3.010685] ThumbEE CPU extension supported.
  273. [ 3.014977] Registering SWP/SWPB emulation handler
  274. [ 3.020023] Bus freq driver module loaded
  275. [ 3.024051] Bus freq driver Enabled
  276. [ 3.027589] mxc_dvfs_core_probe
  277. [ 3.030807] DVFS driver module loaded
  278. [ 3.034778] registered taskstats version 1
  279. [ 3.038983] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  280. [ 3.085691] EXT3-fs: barriers not enabled
  281. [ 3.102623] kjournald starting. Commit interval 5 seconds
  282. [ 3.128737] EXT3-fs (mmcblk0p2): using internal journal
  283. [ 3.134027] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
  284. [ 3.140976] VFS: Mounted root (ext3 filesystem) on device 179:2.
  285. [ 3.172429] devtmpfs: mounted
  286. [ 3.175488] Freeing init memory: 212K
  287. [ 3.281429] Failed to execute /usr/lib/systemd/systemd. Attempting defaults...
  288. [ 3.380578] Kernel panic - not syncing: No init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
  289. [ 3.393056] Backtrace:
  290. [ 3.395542] [<c0046338>] (dump_backtrace+0x0/0x10c) from [<c05373ac>] (dump_stack+0x18/0x1c)
  291. [ 3.404010] r6:c0079590 r5:c0031f0c r4:c072e500 r3:00000002
  292. [ 3.409778] [<c0537394>] (dump_stack+0x0/0x1c) from [<c0537b38>] (panic+0x74/0x1a0)
  293. [ 3.417467] [<c0537ac4>] (panic+0x0/0x1a0) from [<c0537328>] (init_post+0xa8/0xcc)
  294. [ 3.425061] r3:e9fdba80 r2:0000000f r1:0002988b r0:c066dd42
  295. [ 3.430643] mmc1: queuing unknown CIS tuple 0x80 (50 bytes)
  296. [ 3.436407] r7:00000013
  297. [ 3.438976] [<c0537280>] (init_post+0x0/0xcc) from [<c0008af8>] (kernel_init+0x13c/0x174)
  298. [ 3.447181] r4:c0031f0c r3:00000008
  299. [ 3.450819] [<c00089bc>] (kernel_init+0x0/0x174) from [<c0079590>] (do_exit+0x0/0x6c8)
  300. [ 3.458761] r5:c00089bc r4:00000000
  301. [ 3.462392] CPU3: stopping
  302. [ 3.465101] Backtrace:
  303. [ 3.467573] [<c0046338>] (dump_backtrace+0x0/0x10c) from [<c05373ac>] (dump_stack+0x18/0x1c)
  304. [ 3.476015] r6:00000000 r5:f2a00100 r4:00000003 r3:00000000
  305. [ 3.481745] [<c0537394>] (dump_stack+0x0/0x1c) from [<c003d2ac>] (do_IPI+0xe0/0x1b0)
  306. [ 3.489508] [<c003d1cc>] (do_IPI+0x0/0x1b0) from [<c054008c>] (__irq_svc+0x4c/0xe8)
  307. [ 3.497169] Exception stack(0xe9f07f70 to 0xe9f07fb8)
  308. [ 3.502226] 7f60: 00000000 00000000 e9f07fa0 00000006
  309. [ 3.510412] 7f80: e9f06000 c0545e38 10c0387d c072d440 1000406a 412fc09a 00000000 e9f07fc4
  310. [ 3.518597] 7fa0: e9f07fa0 e9f07fb8 c005186c c00433e8 80000013 ffffffff
  311. [ 3.525214] r7:00000002 r6:00000006 r5:f2a00100 r4:ffffffff
  312. [ 3.530936] [<c00433bc>] (default_idle+0x0/0x30) from [<c00437a4>] (cpu_idle+0x98/0xfc)
  313. [ 3.538959] [<c004370c>] (cpu_idle+0x0/0xfc) from [<c0534540>] (secondary_start_kernel+0x134/0x154)
  314. [ 3.548008] r5:00000003 r4:c070ef88
  315. [ 3.551619] [<c053440c>] (secondary_start_kernel+0x0/0x154) from [<10533eb4>] (0x10533eb4)
  316. [ 3.559886] r5:00000015 r4:39f0806a
  317. [ 3.563491] CPU1: stopping
  318. [ 3.566200] Backtrace:
  319. [ 3.568672] [<c0046338>] (dump_backtrace+0x0/0x10c) from [<c05373ac>] (dump_stack+0x18/0x1c)
  320. [ 3.577114] r6:00000000 r5:f2a00100 r4:00000001 r3:00000000
  321. [ 3.582836] [<c0537394>] (dump_stack+0x0/0x1c) from [<c003d2ac>] (do_IPI+0xe0/0x1b0)
  322. [ 3.590591] [<c003d1cc>] (do_IPI+0x0/0x1b0) from [<c054008c>] (__irq_svc+0x4c/0xe8)
  323. [ 3.598252] Exception stack(0xe9fa3f70 to 0xe9fa3fb8)
  324. [ 3.603309] 3f60: 00000000 00000000 e9fa3fa0 00000006
  325. [ 3.611495] 3f80: e9fa2000 c0545e38 10c0387d c072d440 1000406a 412fc09a 00000000 e9fa3fc4
  326. [ 3.619680] 3fa0: e9fa3fa0 e9fa3fb8 c005186c c00433e8 80000013 ffffffff
  327. [ 3.626297] r7:00000002 r6:00000006 r5:f2a00100 r4:ffffffff
  328. [ 3.632018] [<c00433bc>] (default_idle+0x0/0x30) from [<c00437a4>] (cpu_idle+0x98/0xfc)
  329. [ 3.640034] [<c004370c>] (cpu_idle+0x0/0xfc) from [<c0534540>] (secondary_start_kernel+0x134/0x154)
  330. [ 3.649083] r5:00000001 r4:c070ef88
  331. [ 3.652692] [<c053440c>] (secondary_start_kernel+0x0/0x154) from [<10533eb4>] (0x10533eb4)
  332. [ 3.660959] r5:00000015 r4:39fa406a
  333. [ 3.664564] CPU2: stopping
  334. [ 3.667273] Backtrace:
  335. [ 3.669744] [<c0046338>] (dump_backtrace+0x0/0x10c) from [<c05373ac>] (dump_stack+0x18/0x1c)
  336. [ 3.678185] r6:00000000 r5:f2a00100 r4:00000002 r3:00000000
  337. [ 3.683908] [<c0537394>] (dump_stack+0x0/0x1c) from [<c003d2ac>] (do_IPI+0xe0/0x1b0)
  338. [ 3.691664] [<c003d1cc>] (do_IPI+0x0/0x1b0) from [<c054008c>] (__irq_svc+0x4c/0xe8)
  339. [ 3.699324] Exception stack(0xe9fbbf70 to 0xe9fbbfb8)
  340. [ 3.704382] bf60: 00000000 00000000 e9fbbfa0 00000006
  341. [ 3.712568] bf80: e9fba000 c0545e38 10c0387d c072d440 1000406a 412fc09a 00000000 e9fbbfc4
  342. [ 3.720753] bfa0: e9fbbfa0 e9fbbfb8 c005186c c00433e8 80000013 ffffffff
  343. [ 3.727369] r7:00000002 r6:00000006 r5:f2a00100 r4:ffffffff
  344. [ 3.733091] [<c00433bc>] (default_idle+0x0/0x30) from [<c00437a4>] (cpu_idle+0x98/0xfc)
  345. [ 3.741107] [<c004370c>] (cpu_idle+0x0/0xfc) from [<c0534540>] (secondary_start_kernel+0x134/0x154)
  346. [ 3.750155] r5:00000002 r4:c070ef88
  347. [ 3.753765] [<c053440c>] (secondary_start_kernel+0x0/0x154) from [<10533eb4>] (0x10533eb4)
  348. [ 3.762032] r5:00000015 r4:39fbc06a
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!