Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- fox:~# wpa_supplicant -Dwext -i wlan2 -c config-wpa2 -dd
- Initializing interface 'wlan2' conf 'config-wpa2' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
- Configuration file 'config-wpa2' -> '/root/config-wpa2'
- Reading configuration file '/root/config-wpa2'
- Line: 1 - start of a new network block
- ssid - hexdump_ascii(len=7):
- 4d 69 6e 69 6e 65 74 Mininet
- key_mgmt: 0x2
- proto: 0x2
- pairwise: 0x10
- group: 0x10
- PSK (ASCII passphrase) - hexdump_ascii(len=29): [REMOVED]
- PSK (from passphrase) - hexdump(len=32): [REMOVED]
- Priority group 0
- id=0 ssid='Mininet'
- Initializing interface (2) 'wlan2'
- WEXT: cfg80211-based driver detected
- Interface wlan2 set UP - waiting a second for the driver to complete initialization
- SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
- capabilities: key_mgmt 0xf enc 0xf flags 0x0
- WEXT: Operstate: linkmode=1, operstate=5
- Own MAC address: 00:1f:1f:f3:44:63
- wpa_driver_wext_set_wpa
- wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
- wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
- wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
- wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
- wpa_driver_wext_set_countermeasures
- wpa_driver_wext_set_drop_unencrypted
- RSN: flushing PMKID list in the driver
- Setting scan request: 0 sec 100000 usec
- WPS: UUID based on MAC address - hexdump(len=16): 35 59 07 37 8a 56 5c e7 be ea bc c6 bb 45 a0 99
- WPS: Build Beacon and Probe Response IEs
- WPS: * Version
- WPS: * Wi-Fi Protected Setup State (0)
- WPS: * Version
- WPS: * Wi-Fi Protected Setup State (0)
- WPS: * Response Type (2)
- WPS: * UUID-E
- WPS: * Manufacturer
- WPS: * Model Name
- WPS: * Model Number
- WPS: * Serial Number
- WPS: * Primary Device Type
- WPS: * Device Name
- WPS: * Config Methods (0)
- WPS: * RF Bands (3)
- EAPOL: SUPP_PAE entering state DISCONNECTED
- EAPOL: KEY_RX entering state NO_KEY_RECEIVE
- EAPOL: SUPP_BE entering state INITIALIZE
- EAP: EAP entering state DISABLED
- Added interface wlan2
- RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
- RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan2' added
- Wireless event: cmd=0x8b06 len=8
- RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
- RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan2' added
- Wireless event: cmd=0x8b1a len=8
- l2_packet_receive - recvfrom: Network is down
- State: DISCONNECTED -> SCANNING
- Starting AP scan (broadcast SSID)
- Trying to get current scan results first without requesting a new scan to speed up initial association
- ioctl[SIOCGIWSCAN]: Network is down
- Failed to get scan results
- Failed to get scan results - try scanning again
- Setting scan request: 0 sec 0 usec
- Starting AP scan (broadcast SSID)
- ioctl[SIOCSIWSCAN]: Network is down
- Scan requested (ret=-1) - scan timeout 5 seconds
- Failed to initiate AP scan.
- Setting scan request: 10 sec 0 usec
- EAPOL: disable timer tick
- Scan timeout - try to get results
- ioctl[SIOCGIWSCAN]: Network is down
- Failed to get scan results
- Failed to get scan results - try scanning again
- Setting scan request: 1 sec 0 usec
- Starting AP scan (broadcast SSID)
- ioctl[SIOCSIWSCAN]: Network is down
- Scan requested (ret=-1) - scan timeout 5 seconds
- Failed to initiate AP scan.
- Setting scan request: 10 sec 0 usec
- Scan timeout - try to get results
- ioctl[SIOCGIWSCAN]: Network is down
- Failed to get scan results
- Failed to get scan results - try scanning again
- Setting scan request: 1 sec 0 usec
- Starting AP scan (broadcast SSID)
- ioctl[SIOCSIWSCAN]: Network is down
- Scan requested (ret=-1) - scan timeout 5 seconds
- Failed to initiate AP scan.
- Setting scan request: 10 sec 0 usec
- Scan timeout - try to get results
- ioctl[SIOCGIWSCAN]: Network is down
- Failed to get scan results
- Failed to get scan results - try scanning again
- Setting scan request: 1 sec 0 usec
- Starting AP scan (broadcast SSID)
- ioctl[SIOCSIWSCAN]: Network is down
- Scan requested (ret=-1) - scan timeout 5 seconds
- Failed to initiate AP scan.
- Setting scan request: 10 sec 0 usec
- Scan timeout - try to get results
- ioctl[SIOCGIWSCAN]: Network is down
- Failed to get scan results
- Failed to get scan results - try scanning again
- Setting scan request: 1 sec 0 usec
- Starting AP scan (broadcast SSID)
- ioctl[SIOCSIWSCAN]: Network is down
- Scan requested (ret=-1) - scan timeout 5 seconds
- Failed to initiate AP scan.
- Setting scan request: 10 sec 0 usec
- Scan timeout - try to get results
- ioctl[SIOCGIWSCAN]: Network is down
- Failed to get scan results
- Failed to get scan results - try scanning again
- Setting scan request: 1 sec 0 usec
- Starting AP scan (broadcast SSID)
- ioctl[SIOCSIWSCAN]: Network is down
- Scan requested (ret=-1) - scan timeout 5 seconds
- Failed to initiate AP scan.
- Setting scan request: 10 sec 0 usec
- Scan timeout - try to get results
- ioctl[SIOCGIWSCAN]: Network is down
- Failed to get scan results
- Failed to get scan results - try scanning again
- Setting scan request: 1 sec 0 usec
- Starting AP scan (broadcast SSID)
- ioctl[SIOCSIWSCAN]: Network is down
- Scan requested (ret=-1) - scan timeout 5 seconds
- Failed to initiate AP scan.
- Setting scan request: 10 sec 0 usec
- Scan timeout - try to get results
- ioctl[SIOCGIWSCAN]: Network is down
- Failed to get scan results
- Failed to get scan results - try scanning again
- Setting scan request: 1 sec 0 usec
- Starting AP scan (broadcast SSID)
- ioctl[SIOCSIWSCAN]: Network is down
- Scan requested (ret=-1) - scan timeout 5 seconds
- Failed to initiate AP scan.
- Setting scan request: 10 sec 0 usec
- Scan timeout - try to get results
- ioctl[SIOCGIWSCAN]: Network is down
- Failed to get scan results
- Failed to get scan results - try scanning again
- Setting scan request: 1 sec 0 usec
- Starting AP scan (broadcast SSID)
- ioctl[SIOCSIWSCAN]: Network is down
- Scan requested (ret=-1) - scan timeout 5 seconds
- Failed to initiate AP scan.
- Setting scan request: 10 sec 0 usec
- Scan timeout - try to get results
- ioctl[SIOCGIWSCAN]: Network is down
- Failed to get scan results
- Failed to get scan results - try scanning again
- Setting scan request: 1 sec 0 usec
- Starting AP scan (broadcast SSID)
- ioctl[SIOCSIWSCAN]: Network is down
- Scan requested (ret=-1) - scan timeout 5 seconds
- Failed to initiate AP scan.
- Setting scan request: 10 sec 0 usec
- Scan timeout - try to get results
- ioctl[SIOCGIWSCAN]: Network is down
- Failed to get scan results
- Failed to get scan results - try scanning again
- Setting scan request: 1 sec 0 usec
- Starting AP scan (broadcast SSID)
- ioctl[SIOCSIWSCAN]: Network is down
- Scan requested (ret=-1) - scan timeout 5 seconds
- Failed to initiate AP scan.
- Setting scan request: 10 sec 0 usec
- Scan timeout - try to get results
- ioctl[SIOCGIWSCAN]: Network is down
- Failed to get scan results
- Failed to get scan results - try scanning again
- Setting scan request: 1 sec 0 usec
- Starting AP scan (broadcast SSID)
- ioctl[SIOCSIWSCAN]: Network is down
- Scan requested (ret=-1) - scan timeout 5 seconds
- Failed to initiate AP scan.
- Setting scan request: 10 sec 0 usec
- Scan timeout - try to get results
- ioctl[SIOCGIWSCAN]: Network is down
- Failed to get scan results
- Failed to get scan results - try scanning again
- Setting scan request: 1 sec 0 usec
- Starting AP scan (broadcast SSID)
- ioctl[SIOCSIWSCAN]: Network is down
- Scan requested (ret=-1) - scan timeout 5 seconds
- Failed to initiate AP scan.
- Setting scan request: 10 sec 0 usec
- Scan timeout - try to get results
- ioctl[SIOCGIWSCAN]: Network is down
- Failed to get scan results
- Failed to get scan results - try scanning again
- Setting scan request: 1 sec 0 usec
- Starting AP scan (broadcast SSID)
- ioctl[SIOCSIWSCAN]: Network is down
- Scan requested (ret=-1) - scan timeout 5 seconds
- Failed to initiate AP scan.
- Setting scan request: 10 sec 0 usec
- RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
- RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan2' added
- RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
- RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan2' added
- RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
- RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan2' added
- l2_packet_receive - recvfrom: Network is down
- RTM_DELLINK, IFLA_IFNAME: Interface 'wlan2' removed
- Configured interface was removed.
- State: SCANNING -> DISCONNECTED
- wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
- WEXT: Operstate: linkmode=-1, operstate=5
- EAPOL: External notification - portEnabled=0
- EAPOL: External notification - portValid=0
- Scan timeout - try to get results
- ioctl[SIOCGIWSCAN]: No such device
- Failed to get scan results
- Failed to get scan results - try scanning again
- Setting scan request: 1 sec 0 usec
- State: DISCONNECTED -> SCANNING
- Starting AP scan (broadcast SSID)
- ioctl[SIOCSIWSCAN]: No such device
- Scan requested (ret=-1) - scan timeout 5 seconds
- Failed to initiate AP scan.
- Setting scan request: 10 sec 0 usec
- Scan timeout - try to get results
- ioctl[SIOCGIWSCAN]: No such device
- Failed to get scan results
- Failed to get scan results - try scanning again
- Setting scan request: 1 sec 0 usec
- Starting AP scan (broadcast SSID)
- ioctl[SIOCSIWSCAN]: No such device
- Scan requested (ret=-1) - scan timeout 5 seconds
- Failed to initiate AP scan.
- Setting scan request: 10 sec 0 usec
- Scan timeout - try to get results
- ioctl[SIOCGIWSCAN]: No such device
- Failed to get scan results
- Failed to get scan results - try scanning again
- Setting scan request: 1 sec 0 usec
- Starting AP scan (broadcast SSID)
- ioctl[SIOCSIWSCAN]: No such device
- Scan requested (ret=-1) - scan timeout 5 seconds
- Failed to initiate AP scan.
- Setting scan request: 10 sec 0 usec
- Scan timeout - try to get results
- ioctl[SIOCGIWSCAN]: No such device
- Failed to get scan results
- Failed to get scan results - try scanning again
- Setting scan request: 1 sec 0 usec
- Starting AP scan (broadcast SSID)
- ioctl[SIOCSIWSCAN]: No such device
- Scan requested (ret=-1) - scan timeout 5 seconds
- Failed to initiate AP scan.
- Setting scan request: 10 sec 0 usec
- Scan timeout - try to get results
- ioctl[SIOCGIWSCAN]: No such device
- Failed to get scan results
- Failed to get scan results - try scanning again
- Setting scan request: 1 sec 0 usec
- Starting AP scan (broadcast SSID)
- ioctl[SIOCSIWSCAN]: No such device
- Scan requested (ret=-1) - scan timeout 5 seconds
- Failed to initiate AP scan.
- Setting scan request: 10 sec 0 usec
- Scan timeout - try to get results
- ioctl[SIOCGIWSCAN]: No such device
- Failed to get scan results
- Failed to get scan results - try scanning again
- Setting scan request: 1 sec 0 usec
- Starting AP scan (broadcast SSID)
- ioctl[SIOCSIWSCAN]: No such device
- Scan requested (ret=-1) - scan timeout 5 seconds
- Failed to initiate AP scan.
- Setting scan request: 10 sec 0 usec
- ^CCTRL-EVENT-TERMINATING - signal 2 received
- Removing interface wlan2
- No keys have been configured - skip key clearing
- State: SCANNING -> DISCONNECTED
- wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
- WEXT: Operstate: linkmode=-1, operstate=5
- EAPOL: External notification - portEnabled=0
- EAPOL: External notification - portValid=0
- wpa_driver_wext_set_wpa
- WEXT: SIOCSIWAUTH(param 7 value 0x0) failed: No such device)
- Failed to disable WPA in the driver.
- wpa_driver_wext_set_drop_unencrypted
- WEXT: SIOCSIWAUTH(param 5 value 0x0) failed: No such device)
- wpa_driver_wext_set_countermeasures
- WEXT: SIOCSIWAUTH(param 4 value 0x0) failed: No such device)
- No keys have been configured - skip key clearing
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement