API tools faq
paste
Advertisement
droidbox

Untitled

droidbox
Jan 16th, 2016
253
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 77.02 KB | None | 0 0
raw download clone embed print report
  1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.01.16 11:56:14 =~=~=~=~=~=~=~=~=~=~=~=
  2. †!UÒšÂʲºÊj
  3. BT : 14:49:48 Dec 14 2015
  4. PMU:rn5t618
  5. DC01 v:1100, 0x[36]: 18 -> 28
  6. DC02 v:1150, 0x[37]: 18 -> 2c
  7. DC03 v:1500, 0x[38]: 38 -> 48
  8. LDO01 v:2900, 0x[4c]: 4e -> 50
  9. LDO02 v:1800, 0x[4d]: 24 -> 24
  10. LDO03 v:1800, 0x[4e]: 30 -> 30
  11. LDO04 v:2850, 0x[4f]: 4e -> 4e
  12. LDO05 v:1800, 0x[50]: 24 -> 24
  13. LDO0a v:2700, 0x[56]: 28 -> 28
  14. LDO0b v:900, 0x[57]: 00 -> 00
  15.  
  16. CPU clock is 792MHz
  17.  
  18. CPU type: M8M2
  19. DDR info: 2GB(auto) @ 792MHz(1T)
  20. DDR channel: DDR 0 + DDR 1
  21.  
  22. DDR init use : 12239 us
  23.  
  24. HHH
  25. Boot From SDIO C
  26. 0x0000008d
  27. ucl decompress...pass
  28. 0x12345678
  29. Boot from internal device 1st eMMC on SDIO C
  30.  
  31. TE : 560851
  32.  
  33. System Started
  34.  
  35.  
  36. U-boot-00000-g99c5e8c-dirty(m8_k200_v1@m201) (Dec 14 2015 - 14:49:37)
  37.  
  38. clr h-ram
  39. DRAM: 2 GiB
  40. relocation Offset is: 6feb0000
  41. show partition table:
  42. part: 0, name : logo, size : 2000000
  43. part: 1, name : recovery, size : 2000000
  44. part: 2, name : misc, size : 2000000
  45. part: 3, name : boot, size : 2000000
  46. part: 4, name : system, size : 40000000
  47. part: 5, name : cache, size : 20000000
  48. part: 6, name : data, size : end
  49. aml_card_type=0x200
  50. MMC: [mmc_register] add mmc dev_num=0, port=1, if_type=6
  51. [mmc_register] add mmc dev_num=1, port=2, if_type=6
  52. SDIO Port B: 0, SDIO Port C: 1
  53. PMU fault status:
  54. reg[0x9A] = 0x1d
  55. LSI version:04, OTP version:0c
  56. PMU type:RN5T618
  57. register usb cfg[0][1] = 7ff68308
  58. register usb cfg[2][0] = 7ff6be34
  59. mcli -- wifi_power_init in uboot --
  60. enter emmc boot
  61. Emmckey: Access range is illegal!
  62. [mmc_init] SDIO Port C:1, if_type=6, initialized OK!
  63. [mmc_get_partition_table] skip cache partition.
  64. Partition table get from SPL is :
  65. name offset size flag
  66. ===================================================================================
  67. 0: bootloader 0 400000 0
  68. 1: reserved 2400000 4000000 0
  69. 2: cache 6c00000 20000000 2
  70. 3: env 27400000 800000 0
  71. 4: logo 28400000 2000000 1
  72. 5: recovery 2ac00000 2000000 1
  73. 6: misc 2d400000 2000000 1
  74. 7: boot 2fc00000 2000000 1
  75. 8: system 32400000 40000000 1
  76. 9: data 72c00000 6c7400000 4
  77. mmc read lba=0x12000, blocks=0x1
  78. mmc read lba=0x12001, blocks=0x1
  79. mmc_read_partition_tbl: mmc read partition OK!
  80. eMMC/TSD partition table have been checked OK!
  81. i=0,register --- emmc_key
  82. device_boot_flag=2
  83. EMMC BOOT: not init nand
  84. do not init nand : cause boot_device_flag without nand
  85. MMC BOOT, emmc_env_relocate_spec : env_relocate_spec 74
  86. set_storage_device_flag: store 2
  87. Multi dtb tool version: v2 .
  88. Multi dtb detected, support 6 dtbs.
  89. aml_dt soc: m8m2 platform: n200 variant: 2G
  90. dtb 0 soc: m8 plat: k200 vari: 2gsdhc
  91. dtb 1 soc: m8 plat: k200 vari: 2gsdio
  92. dtb 2 soc: m8 plat: k200 vari: sdhc
  93. dtb 3 soc: m8 plat: k200 vari: sdio
  94. dtb 4 soc: m8m2 plat: n200 vari: 1G
  95. dtb 5 soc: m8m2 plat: n200 vari: 2G
  96. Find match dtb: 5
  97. vpu driver detect cpu type: m8m2
  98. vpu clk_level in dts: 7
  99. set vpu clk: 364000000Hz, readback: 364000000Hz(0x700)
  100. Net: Meson_Ethernet
  101. init suspend firmware done. (ret:0)
  102. cvbs trimming.1.v5: 0xa0, 0x0
  103. charging
  104. bootmode= boot
  105. wipe_data=successful
  106. wipe_cache=successful
  107. reboot_mode=charging
  108. TV mode 576cvbs selected.
  109. cvbs performance type = 2, table = 0
  110. vdac open.1 = 0x1, 0x0
  111. config HPLL
  112. config HPLL done
  113. Hit Enter key to stop autoboot -- : 1  0
  114. exit abortboot: 0
  115. Enter USB burn
  116. Try connect time out 701, 700, 1300
  117. aml_keys: version 0 can not be init 7ff6c070
  118. current storer:emmc_key
  119. key save is auto select storer(nand or emmc)
  120. write key code version3_flush:709,prov->write:7fef7e54
  121. write key ok!!
  122. Booting...
  123. pos 509 value is 20ERR(v2_common/optimus_download_key.c)L473:failed to query key state, rc 0, keyIsBurned=0
  124. pos 509 value is 20ERR(v2_common/optimus_download_key.c)L473:failed to query key state, rc 0, keyIsBurned=0
  125. bootprio= boot
  126. ## ANDROID Format IMAGE
  127. ## Booting kernel from Legacy Image at 12000000 ...
  128. Image Name: Linux-3.10.33
  129. Image Type: ARM Linux Kernel Image (lzo compressed)
  130. Data Size: 6740532 Bytes = 6.4 MiB
  131. Load Address: 00208000
  132. Entry Point: 00208000
  133. Verifying Checksum ... OK
  134. Ramdisk start addr = 0x1266e800, len = 0xc4ced
  135. Multi dtb tool version: v2 .
  136. Multi dtb detected, support 6 dtbs.
  137. aml_dt soc: m8m2 platform: n200 variant: 2G
  138. dtb 0 soc: m8 plat: k200 vari: 2gsdhc
  139. dtb 1 soc: m8 plat: k200 vari: 2gsdio
  140. dtb 2 soc: m8 plat: k200 vari: sdhc
  141. dtb 3 soc: m8 plat: k200 vari: sdio
  142. dtb 4 soc: m8m2 plat: n200 vari: 1G
  143. dtb 5 soc: m8m2 plat: n200 vari: 2G
  144. Find match dtb: 5
  145. Flat device tree start addr = 0x1274f000, len = 0x5190 magic=0xedfe0dd0
  146. Uncompressing Kernel Image ... OK
  147. uboot time: 2894525 us.
  148. EFUSE machid is not set.
  149. Using machid 0xf81 from environment
  150. From device tree /memory/ node aml_reserved_end property, for relocate ramdisk and fdt, relocate_addr: 0x50ce001
  151. Loading Ramdisk to 05009000, end 050cdced ... OK
  152. Loading Device Tree to 05000000, end 0500818f ... OK
  153.  
  154. Starting kernel ...
  155.  
  156. [ 0.000000@0] Booting Linux on physical CPU 0x200
  157. [ 0.000000@0] Initializing cgroup subsys cpu
  158. [ 0.000000@0] Initializing cgroup subsys cpuacct
  159. [ 0.000000@0] Linux version 3.10.33-gfa4a182-dirty (user@DroidBOX) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #1 SMP PREEMPT Fri Dec 18 20:59:44 CET 2015
  160. [ 0.000000@0] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
  161. [ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  162. [ 0.000000@0] Machine: Amlogic Meson8, model: AMLOGIC
  163. [ 0.000000@0] physical memory start address is 0x200000
  164. [ 0.000000@0] reserved_end is 1cafffff
  165. [ 0.000000@0]
  166. [ 0.000000@0] Total memory is 2046 MiB
  167. [ 0.000000@0] Reserved low memory from 0x06000000 to 0x1cafffff, size: 363 MiB
  168. [ 0.000000@0] mesonfb0(low) : 0x06100000 - 0x07900000 ( 24 MiB)
  169. [ 0.000000@0] mesonfb1(low) : 0x07900000 - 0x07a00000 ( 1 MiB)
  170. [ 0.000000@0] deinterlace0(high) : 0x7df00000 - 0x80000000 ( 33 MiB)
  171. [ 0.000000@0] mesonstream0(low) : 0x07a00000 - 0x09a00000 ( 32 MiB)
  172. [ 0.000000@0] vdec0(low) : 0x09a00000 - 0x19a00000 (256 MiB)
  173. [ 0.000000@0] ppmgr0(high) : 0x7bf00000 - 0x7df00000 ( 32 MiB)
  174. [ 0.000000@0] vdin00(low) : 0x19a00000 - 0x19b00000 ( 1 MiB)
  175. [ 0.000000@0] vdin10(low) : 0x19b00000 - 0x1ab00000 ( 16 MiB)
  176. [ 0.000000@0] amlvideo20(low) : 0x1ab00000 - 0x1c300000 ( 24 MiB)
  177. [ 0.000000@0] amvideocap0(low) : 0x1c300000 - 0x1cb00000 ( 8 MiB)
  178. [ 0.000000@0] get storage device: storage 2
  179. [ 0.000000@0] value=2
  180. [ 0.000000@0] get_storage_device : get storage device: storage 2
  181. [ 0.000000@0] get_storage_device : value=2
  182. [ 0.000000@0] [get_storage_device] storage_flag=2
  183. [ 0.000000@0] cma: CMA: reserved 8 MiB at 2f000000
  184. [ 0.000000@0] cma: Found region@0, memory base 0, size 18 MiB
  185. [ 0.000000@0] cma: CMA: reserved 20 MiB at 2dc00000
  186. [ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc
  187. [ 0.000000@0] Meson chip version = RevA (1D:A - 0:74E)
  188. [ 0.000000@0] PERCPU: Embedded 9 pages/cpu @c1f18000 s13120 r8192 d15552 u36864
  189. [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 409104
  190. [ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200n8 no_console_suspend earlyprintk ramoops.mem_address=0x04e00000 ramoops.mem_size=0x100000 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive storage=2 cvbsdrv=0 vdaccfg=0xa000 logo=osd1,loaded,0x07900000,576cvbs,full hdmimode=1080p cvbsmode=576cvbs androidboot.firstboot=1 hdmitx= mac=00:01:db:8a:02:54
  191. [ 0.000000@0] cvbs performance line = 0
  192. [ 0.000000@0] cvbs trimming line = 0xa000
  193. [ 0.000000@0] cvbs trimming.1.v5: 0xa0, 0x0
  194. [ 0.000000@0] osd1:1
  195. [ 0.000000@0] loaded:268435459
  196. [ 0.000000@0] logo has been loaded
  197. [ 0.000000@0] 576cvbs:8
  198. [ 0.000000@0] full:2
  199. [ 0.000000@0] kernel get hdmimode form uboot is 1080p
  200. [ 0.000000@0] kernel get cvbsmode form uboot is 576cvbs
  201. [ 0.000000@0] ******** uboot setup mac-addr: 0:1:db:8a:2:54
  202. [ 0.000000@0] PID hash table entries: 2048 (order: 1, 8192 bytes)
  203. [ 0.000000@0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  204. [ 0.000000@0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  205. [ 0.000000@0] Memory: 64MB 16MB 1524MB = 1604MB total
  206. [ 0.000000@0] Memory: 1580536k/1580536k available, 61960k reserved, 1250304K highmem
  207. [ 0.000000@0] Virtual kernel memory layout:
  208. [ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  209. [ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  210. [ 0.000000@0] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  211. [ 0.000000@0] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  212. [ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  213. [ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  214. [ 0.000000@0] .text : 0xc0008000 - 0xc0b91fe0 (11816 kB)
  215. [ 0.000000@0] .init : 0xc0b92000 - 0xc0bf1340 ( 381 kB)
  216. [ 0.000000@0] .data : 0xc0bf2000 - 0xc0cab1e8 ( 741 kB)
  217. [ 0.000000@0] .bss : 0xc0cab1e8 - 0xc0f844d4 (2917 kB)
  218. [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  219. [ 0.000000@0] Preemptible hierarchical RCU implementation.
  220. [ 0.000000@0] NR_IRQS:256
  221. [ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  222. [ 0.000000@0] Switching to timer-based delay loop
  223. [ 0.000000@0] console [ttyS0] enabled
  224. [ 0.393345@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
  225. [ 0.403576@0] pid_max: default: 32768 minimum: 301
  226. [ 0.408463@0] Security Framework initialized
  227. [ 0.412573@0] SELinux: Disabled at boot.
  228. [ 0.416586@0] Mount-cache hash table entries: 512
  229. [ 0.425736@0] Initializing cgroup subsys debug
  230. [ 0.425776@0] Initializing cgroup subsys freezer
  231. [ 0.430220@0] CPU: Testing write buffer coherency: ok
  232. [ 0.435467@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
  233. [ 0.440987@0] Setting up static identity map for 0xc07fb2d0 - 0xc07fb328
  234. [ 0.447681@0] L310 cache controller enabled
  235. [ 0.451742@0] l2x0: 8 ways, 4096 sets, CACHE_ID 0x4100a0c9, Cache size: 1048576 B
  236. [ 0.459204@0] AUX_CTRL 0x7ec80001, PERFETCH_CTRL 0x71000007, POWER_CTRL 0x00000000
  237. [ 0.467319@0] TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222
  238. [ 0.550205@0] write pen_release: 1
  239. [ 0.550400@1] CPU1: Booted secondary processor
  240. [ 0.550415@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
  241. [ 0.570206@0] write pen_release: 2
  242. [ 0.578322@2] CPU2: Booted secondary processor
  243. [ 0.578343@2] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202
  244. [ 0.590194@0] write pen_release: 3
  245. [ 0.598304@3] CPU3: Booted secondary processor
  246. [ 0.598318@3] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203
  247. [ 0.598418@0] Brought up 4 CPUs
  248. [ 0.611444@0] SMP: Total of 4 processors activated (8.00 BogoMIPS).
  249. [ 0.617635@0] CPU: All CPU(s) started in SVC mode.
  250. [ 0.623090@0] devtmpfs: initialized
  251. [ 0.632506@0] clkrate [ xtal ] : 24000000
  252. [ 0.632544@0] clkrate [ pll_sys ] : 792000000
  253. [ 0.635370@0] clkrate [ pll_fixed ] : 2550000000
  254. [ 0.640041@0] clkrate [ pll_vid ] : 648000000
  255. [ 0.644425@0] TODO: clk_get_rate_hpll() is not implement in M8 now
  256. [ 0.650557@0] clkrate [ pll_hpll ] : 0
  257. [ 0.654344@0] clkrate [ pll_ddr ] : 0
  258. [ 0.658054@0] clkrate [ a9_clk ] : 792000000
  259. [ 0.662375@0] clkrate [ clk81 ] : 141666666
  260. [ 0.667619@0] pinctrl core: initialized pinctrl subsystem
  261. [ 0.672182@0] regulator-dummy: no parameters
  262. [ 0.677380@0] NET: Registered protocol family 16
  263. [ 0.689096@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  264. [ 0.690716@0] ramoops: using module parameters
  265. [ 0.695183@0] pstore przs=0xf0010000
  266. [ 0.698517@0] pstore cprz=0xf0008000
  267. [ 0.702609@0] console [pstore-1] enabled
  268. [ 0.705932@0] ram_console: failed to create proc entry
  269. [ 0.712343@0] VPU driver version: v03
  270. [ 0.714644@0] vpu driver detect cpu type: m8m2
  271. [ 0.719043@0] load vpu_clk in dts: 364000000Hz(7)
  272. [ 0.723730@0] vpu_probe OK
  273. [ 0.726732@0] cma: Assigned CMA region with name cma_0 to amvenc_avc.0 device
  274. [ 0.736202@0] amlogic_gpio gpio: Probed amlogic GPIO driver
  275. [ 0.739225@0] register lm device lm-root
  276. [ 0.742906@0] register lm device lm1
  277. [ 0.746423@0] register lm device lm0
  278. [ 0.750119@0] Init pinux probe!
  279. [ 0.753589@0] pinmux-m8 pinmux: Probed amlogic pinctrl driver
  280. [ 0.758741@0] tv_init_module
  281. [ 0.761587@0] major number 254 for disp
  282. [ 0.765358@0] vout_register_server
  283. [ 0.768722@0] register tv module server ok
  284. [ 0.772812@0] major number 0 for disp
  285. [ 0.776398@0] register tv module server ok
  286. [ 0.780478@0] video2_early_init enter
  287. [ 0.784075@0] video2_early_init exit
  288. [ 0.787640@0] aml_i2c version: 20140813
  289. [ 0.791590@0] aml-i2c i2c-AO: add adapter aml_i2c_adap0(ed73d0a8)
  290. [ 0.797447@0] aml-i2c i2c-AO: aml i2c bus driver.
  291. [ 0.802241@0] aml-i2c i2c-A: add adapter aml_i2c_adap1(ed73d4a8)
  292. [ 0.808055@0] aml-i2c i2c-A: aml i2c bus driver.
  293. [ 0.812788@0] aml-i2c i2c-B: add adapter aml_i2c_adap2(ed73d8a8)
  294. [ 0.818578@0] aml-i2c i2c-B: aml i2c bus driver.
  295. [ 0.823300@0] aml-i2c i2c-C: add adapter aml_i2c_adap3(ed73dca8)
  296. [ 0.829100@0] aml-i2c i2c-C: aml i2c bus driver.
  297. [ 0.833764@0] aml_pmu_init, 458
  298. [ 0.836805@0] call aml_dvfs_init in
  299. [ 0.840475@0] hdmitx: system: amhdmitx_init
  300. [ 0.844363@0] hdmitx: system: Ver: 2014May6
  301. [ 0.848580@0] hdmitx: system: amhdmitx_probe
  302. [ 0.852924@0] hdmitx: system: not find cec config
  303. [ 0.857386@0] hdmitx: system: not find vend_init_data
  304. [ 0.862518@0] hdmitx: system: gate/pwr cmd: 7
  305. [ 0.866705@0] hdmitx: system: gate/pwr cmd: 1
  306. [ 0.871028@0] hdmitx: system: hw init
  307. [ 0.875171@1] hdmitx: system: reset intr mask
  308. [ 0.890449@0] hdmitx: system: irq 1
  309. [ 0.920391@0] bio: create slab <bio-0> at 0
  310. [ 0.920952@0] SCSI subsystem initialized
  311. [ 0.922975@0] usbcore: registered new interface driver usbfs
  312. [ 0.928476@0] usbcore: registered new interface driver hub
  313. [ 0.933957@0] usbcore: registered new device driver usb
  314. [ 0.939129@0] Linux video capture interface: v2.00
  315. [ 0.943847@0] pps_core: LinuxPPS API ver. 1 registered
  316. [ 0.948873@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  317. [ 0.958125@0] PTP clock support registered
  318. [ 0.962487@0] mode is 15,sync_duration_den=1,sync_duration_num=60
  319. [ 0.968211@0] TV mode 1080p selected.
  320. [ 0.971833@0] tvoutc_setmode[512]
  321. [ 0.975093@0] tvoutc_setmode[523] mode is 15
  322. [ 0.979319@0] vinfo mode is: 1080p
  323. [ 0.982694@0] aml_logo: outputmode changed(8->15), reset osd1 scaler.
  324. [ 1.000814@1] hdmitx: system: gate/pwr cmd: 4
  325. [ 1.210737@1] hdmitx: system: gate/pwr cmd: 5
  326. [ 1.210776@1] hdmitx: edid: edid ready
  327. [ 1.213167@1] hdmitx: system: gate/pwr cmd: 4
  328. [ 1.420736@1] hdmitx: system: gate/pwr cmd: 5
  329. [ 1.420773@1] hdmitx: edid: edid ready
  330. [ 1.423172@1] hdmitx: edid: check sum valid
  331. [ 1.427309@1] hdmitx: edid: check sum valid
  332. [ 1.431459@1] hdmitx: edid: blk0 raw data
  333. [ 1.435416@1] 00ffffffffffff0014e101000000000011170103800002781acf74a3574cb023
  334. [ 1.442574@1] 09484c00000081c0d1c0010101010101010101010101023a801871382d40582c
  335. [ 1.449733@1] 4500c48e2100001e00000018001c1620582c2500c48e2100009e000000fc0045
  336. [ 1.456892@1] 6c6761746f0a202020202020000000fd00173d19460f000a20202020202001e5
  337. [ 1.464050@1]
  338. [ 1.465690@1] hdmitx: edid: blk1 raw data
  339. [ 1.469657@1] 020326f451850403021213941607061115a1a2271f1023090701830100006703
  340. [ 1.476815@1] 0c002000202d8c0aa01451f01600267c4300c48e210000988c0ad08a20e02d10
  341. [ 1.483974@1] 103e9600c48e21000019011d007251d01e206e285500c48e2100001f011d8018
  342. [ 1.491133@1] 711c1620582c2500c48e2100009e0000000000000000000000000000000000ff
  343. [ 1.498292@1]
  344. [ 1.500382@1] hdmitx: edid: find IEEEOUT
  345. [ 1.503886@1] hdmitx: video: get current mode: 1080p
  346. [ 1.508737@1] is_similar_hdmi_vic[326] vic_old=0,mode_new=15
  347. [ 1.514346@1] hdmitx: system: gate/pwr cmd: 7
  348. [ 1.518701@1] hdmitx: system: already init VIC = 0 Now VIC = 16
  349. [ 1.524613@1] hdmitx: system: 16 (cd0,cs0,pm1,vd0,1)
  350. [ 1.529688@1] hdmitx: system: gate/pwr cmd: 0
  351. [ 1.534012@1] hdmitx: system: hw reset
  352. [ 1.538757@1] hdmitx: audio: SPDIF
  353. [ 1.541139@1] hdmitx: system: reconfig packet setting done
  354. [ 1.566496@1] hdmitx: system: set pll
  355. [ 1.566528@1] hdmitx: system: param->VIC:16
  356. [ 1.568666@1] mode is: 15
  357. [ 1.571262@1] VPU_VIU_VENC_MUX_CTRL: 0x22a
  358. [ 1.575305@1] viu chan = 1
  359. [ 1.577979@1] VPU_VIU_VENC_MUX_CTRL: 0x22a
  360. [ 1.582041@1] config HPLL
  361. [ 1.584621@1] set_hpll_clk_out[81] clk = 2970
  362. [ 1.600385@0] call aml_pmu_probe_init in
  363. [ 1.600446@1] config HPLL done
  364. [ 1.600495@0] aml_pmus_probe, child name:rn5t618
  365. [ 1.600498@0] aml_pmus_probe, i2c_bus:i2c_bus_ao
  366. [ 1.600751@0] board_has_battery:false
  367. [ 1.601458@0] Allocate new i2c device: adapter:0, addr:0x32, node name:rn5t618, type:ricoh_pmu
  368. [ 1.601759@0] Advanced Linux Sound Architecture Driver Initialized.
  369. [ 1.602155@0] Bluetooth: Core ver 2.16
  370. [ 1.602186@0] NET: Registered protocol family 31
  371. [ 1.602189@0] Bluetooth: HCI device and connection manager initialized
  372. [ 1.602197@0] Bluetooth: HCI socket layer initialized
  373. [ 1.602204@0] Bluetooth: L2CAP socket layer initialized
  374. [ 1.602221@0] Bluetooth: SCO socket layer initialized
  375. [ 1.602421@0] cfg80211: Calling CRDA to update world regulatory domain
  376. [ 1.665668@1] enc_vpu_bridge_reset[292]
  377. [ 1.666527@0] Switching to clocksource Timer-E
  378. [ 1.689976@0] NET: Registered protocol family 2
  379. [ 1.690482@0] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  380. [ 1.696134@0] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  381. [ 1.702644@0] TCP: Hash tables configured (established 4096 bind 4096)
  382. [ 1.709108@0] TCP: reno registered
  383. [ 1.712424@0] UDP hash table entries: 256 (order: 1, 8192 bytes)
  384. [ 1.718398@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  385. [ 1.724966@0] NET: Registered protocol family 1
  386. [ 1.729335@0] wifi_dev_probe
  387. [ 1.732086@0] wifi_dt : interrupt_pin=GPIOX_21
  388. [ 1.736505@0] wifi_dt : irq_num=null
  389. [ 1.740018@0] wifi_dt : irq_trigger_type=GPIO_IRQ_HIGH
  390. [ 1.745123@0] wifi_dt : power_on_pin=GPIOAO_6
  391. [ 1.749422@0] wifi_dt : power_on_pin2=GPIOX_11
  392. [ 1.753840@0] interrupt_pin=133, irq_num=4, irq_trigger_type=0, power_on_pin=6,clock_32k_pin=122
  393. [ 1.762769@0] Unpacking initramfs...
  394. [ 1.803852@1] hdmitx: system: phy setting done
  395. [ 1.803899@1] Sink is HDMI device
  396. [ 1.805942@1] No sink attached
  397. [ 1.809001@1] hdmitx: audio: audio channel num is 0
  398. [ 1.812403@0] Freeing initrd memory: 784K (c4e09000 - c4ecd000)
  399. [ 1.814033@0] audit: initializing netlink socket (disabled)
  400. [ 1.814056@0] type=2000 audit(1.700:1): initialized
  401. [ 1.814606@0] bounce pool size: 64 pages
  402. [ 1.818867@0] VFS: Disk quotas dquot_6.5.2
  403. [ 1.819088@0] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  404. [ 1.820786@0] exFAT: Core Version 1.2.4
  405. [ 1.820789@0] exFAT: FS Version 1.2.4
  406. [ 1.821780@0] NTFS driver 2.1.30 [Flags: R/O].
  407. [ 1.822038@0] fuse init (API version 7.22)
  408. [ 1.860494@1] hdmitx: audio: SPDIF
  409. [ 1.860724@0] msgmni has been set to 702
  410. [ 1.861725@0] NET: Registered protocol family 38
  411. [ 1.861879@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  412. [ 1.861884@0] io scheduler noop registered
  413. [ 1.861887@0] io scheduler deadline registered
  414. [ 1.862006@0] io scheduler cfq registered (default)
  415. [ 1.865508@0] loop: module loaded
  416. [ 1.866055@0] tun: Universal TUN/TAP device driver, 1.6
  417. [ 1.866058@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  418. [ 1.866573@0] ethernet base addr is fe0c0000
  419. [ 1.866583@0] key device don't create,extenal_api_key_set_version:2052
  420. [ 1.866586@0] ret = -22
  421. [ 1.866586@0] print_buff=
  422. [ 1.866629@0] stmmac - user ID: 0x11, Synopsys ID: 0x37
  423. [ 1.866631@0] Normal descriptors
  424. [ 1.866632@0] Ring mode enabled
  425. [ 1.866639@0] DMA HW capability register supported
  426. [ 1.866640@0] RX Checksum Offload Engine supported (type 2)
  427. [ 1.866642@0] TX Checksum insertion supported
  428. [ 1.866643@0] Wake-Up On Lan supported
  429. [ 1.866675@0] Enable RX Mitigation via HW Watchdog Timer
  430. [ 1.886292@0] libphy: stmmac: probed
  431. [ 1.886299@0] eth0: PHY ID 001cc916 at 0 IRQ 0 (stmmac-0:00) active
  432. [ 1.886304@0] eth0: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01) active
  433. [ 1.886373@0] PPP generic driver version 2.4.2
  434. [ 1.886517@0] PPP BSD Compression module registered
  435. [ 1.886520@0] PPP Deflate Compression module registered
  436. [ 1.886530@0] PPP MPPE Compression module registered
  437. [ 1.886534@0] NET: Registered protocol family 24
  438. [ 1.886608@0] usbcore: registered new interface driver asix
  439. [ 1.886676@0] usbcore: registered new interface driver ax88179_178a
  440. [ 1.886712@0] usbcore: registered new interface driver cdc_ether
  441. [ 1.886745@0] usbcore: registered new interface driver dm9601
  442. [ 1.886779@0] usbcore: registered new interface driver net1080
  443. [ 1.886819@0] usbcore: registered new interface driver cdc_subset
  444. [ 1.886853@0] usbcore: registered new interface driver zaurus
  445. [ 1.886913@0] usbcore: registered new interface driver cdc_ncm
  446. [ 1.886946@0] usbcore: registered new interface driver qf9700
  447. [ 1.886980@0] usbcore: registered new interface driver sr9600
  448. [ 1.887195@0] usbcore: registered new interface driver cdc_acm
  449. [ 1.887197@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  450. [ 1.887241@0] usbcore: registered new interface driver usb-storage
  451. [ 1.887321@0] usbcore: registered new interface driver usbserial
  452. [ 1.887350@0] usbcore: registered new interface driver option
  453. [ 1.887373@0] usbserial: USB Serial support registered for GSM modem (1-port)
  454. [ 1.887597@0] mousedev: PS/2 mouse device common for all mice
  455. [ 1.887842@0] usbcore: registered new interface driver xpad
  456. [ 1.887880@0] usbcore: registered new interface driver usb_acecad
  457. [ 1.887913@0] usbcore: registered new interface driver aiptek
  458. [ 1.887944@0] usbcore: registered new interface driver gtco
  459. [ 1.887975@0] usbcore: registered new interface driver hanwang
  460. [ 1.888005@0] usbcore: registered new interface driver kbtab
  461. [ 1.888035@0] usbcore: registered new interface driver wacom
  462. [ 1.888128@0] i2c /dev entries driver
  463. [ 1.888581@0] usbcore: registered new interface driver uvcvideo
  464. [ 1.888583@0] USB Video Class driver (1.1.1)
  465. [ 1.888824@0] device-mapper: uevent: version 1.0.3
  466. [ 1.889054@0] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
  467. [ 1.889244@0] Bluetooth: HCI UART driver ver 2.2
  468. [ 1.889248@0] Bluetooth: HCI H4 protocol initialized
  469. [ 1.889509@0] hidraw: raw HID events driver (C) Jiri Kosina
  470. [ 1.891548@0] usbcore: registered new interface driver usbhid
  471. [ 1.891550@0] usbhid: USB HID core driver
  472. [ 1.891981@0] zram: Created 1 device(s) ...
  473. [ 1.892337@0] ashmem: initialized
  474. [ 1.892507@0] logger: created 256K log 'log_main'
  475. [ 1.892649@0] logger: created 256K log 'log_events'
  476. [ 1.892787@0] logger: created 256K log 'log_radio'
  477. [ 1.892929@0] logger: created 256K log 'log_system'
  478. [ 1.893113@0] vout_init_module
  479. [ 1.893167@0] start init vout module
  480. [ 1.893199@0] create vout attribute ok
  481. [ 1.893670@0] ge2d_init
  482. [ 1.893676@0] ge2d_dev major:243
  483. [ 1.893803@0] ge2d start monitor
  484. [ 1.893882@0] osd_init
  485. [ 1.893889@2] ge2d workqueue monitor start
  486. [ 1.893924@0] osd_probe, vinfo:c08586e0
  487. [ 1.894168@0] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K
  488. [ 1.894172@0] osd_probe, mydef_var:c0c44ce0, vinfo:c08586e0
  489. [ 1.894176@0] init fbdev bpp is :32
  490. [ 1.894179@0] ---------------clear framebuffer0 memory
  491. [ 2.271141@1] hdmitx: audio: current VIC: 16
  492. [ 2.274986@0] Frame buffer memory assigned at phy:0x07900000, vir:0xf0400000, size=1024K
  493. [ 2.274990@0] osd_probe, mydef_var:c0c44ce0, vinfo:c08586e0
  494. [ 2.274992@0] don't find to display_size_default from mesonfb-dts
  495. [ 2.274995@0] init fbdev bpp is :16
  496. [ 2.298356@1] hdmitx: audio: audio sample rate: 0
  497. [ 2.302997@1] hdmitx: audio: set audio N para
  498. [ 2.307326@1] hdmitx: audio: PCM out to HDMI
  499. [ 2.308200@0] osd probe ok
  500. [ 2.308307@0] osd_ext_init
  501. [ 2.308588@0] vout2_init_module enter
  502. [ 2.308680@0] enter aml_sysled_init
  503. [ 2.309166@0] amlvideo-000: V4L2 device registered as video10
  504. [ 2.309356@0] amlvideo2: V4L2 device registered as video11
  505. [ 2.309562@0] ionvideo-000: V4L2 device registered as video13
  506. [ 2.309565@0] Video Technology Magazine Ion Video Capture Board ver 1.0 successfully loaded.
  507. [ 2.309909@0] aml_wdt_driver_init,301
  508. [ 2.309911@0] ** disable watchdog
  509. [ 2.310092@0] keys===========================================
  510. [ 2.310096@0] keys_devno=f000000
  511. [ 2.310216@0] securitykey: device aml_keys created
  512. [ 2.310227@0] amlkeys=0
  513. [ 2.310261@0] platform_driver_register--aml_keys_driver--------------------
  514. [ 2.310522@0] set uart_ao pinmux use pinctrl subsystem
  515. [ 2.310525@0] P_AO_RTI_PIN_MUX_REG:5860
  516. [ 2.310542@0] start uart_ao_ttyS0:(irq = 122)
  517. [ 2.310544@0] register uart_ao ok
  518. [ 2.310740@0] set uart_a pinmux use pinctrl subsystem
  519. [ 2.310742@0] P_AO_RTI_PIN_MUX_REG:5860
  520. [ 2.310758@0] start uart_a_ttyS1:(irq = 58)
  521. [ 2.310760@0] register uart_a ok
  522. [ 2.310944@0] start uart_d_ttyS4:(irq = 126)
  523. [ 2.310946@0] register uart_d ok
  524. [ 2.311061@0] dwc_otg: version 3.10a 12-MAY-2014
  525. [ 2.311091@0] dwc_otg_driver_probe NOT match
  526. [ 2.311128@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000
  527. [ 2.311138@0] USB (1) use clock source: XTAL input
  528. [ 2.332255@0] Core Release: 3.10a
  529. [ 2.332261@0] Setting default values for core params
  530. [ 2.332269@0] curmode: 1, host_only: 1
  531. [ 2.352428@0] Using Buffer DMA mode
  532. [ 2.352433@0] OTG VER PARAM: 1, OTG VER FLAG: 1
  533. [ 2.352437@0] Working on port type = HOST
  534. [ 2.465978@0] dwc_otg lm1: DWC OTG Controller
  535. [ 2.469223@0] dwc_otg lm1: new USB bus registered, assigned bus number 1
  536. [ 2.475913@0] dwc_otg lm1: irq 63, io mem 0x00000000
  537. [ 2.480760@0] -------hcd->flags.d32 = 0
  538. [ 2.484613@0] Init: Port Power? op_state=1
  539. [ 2.487374@1] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
  540. [ 2.487377@1] hdmitx: audio: i2s_to_spdif_flag:1
  541. [ 2.487379@1] hdmitx: audio: Enable audio spdif to HDMI
  542. [ 2.487442@1] hdmitx: audio: audio channel num is 0
  543. [ 2.487449@1] hdmitx: audio: SPDIF
  544. [ 2.487462@1] hdmitx: audio: current VIC: 16
  545. [ 2.487464@1] hdmitx: audio: audio sample rate: 0
  546. [ 2.487466@1] hdmitx: audio: set audio N para
  547. [ 2.487475@1] hdmitx: audio: PCM out to HDMI
  548. [ 2.510340@1] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
  549. [ 2.510342@1] hdmitx: audio: i2s_to_spdif_flag:1
  550. [ 2.510344@1] hdmitx: audio: Enable audio spdif to HDMI
  551. [ 2.510403@1] hdmitx: cec: CEC not ready
  552. [ 2.510406@1] hdmi detect: plug.
  553. [ 2.552383@0] Init1: Power Port (0)
  554. [ 2.555927@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  555. [ 2.562707@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  556. [ 2.570067@0] usb usb1: Product: DWC OTG Controller
  557. [ 2.574904@0] usb usb1: Manufacturer: Linux 3.10.33 dwc_otg_hcd
  558. [ 2.580725@0] usb usb1: SerialNumber: lm1
  559. [ 2.585115@0] hub 1-0:1.0: USB hub found
  560. [ 2.588583@0] hub 1-0:1.0: 1 port detected
  561. [ 2.592874@0] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000
  562. [ 2.601216@0] USB (0) use clock source: XTAL input
  563. [ 2.627035@0] Core Release: 3.10a
  564. [ 2.627076@0] Setting default values for core params
  565. [ 2.629639@0] curmode: 1, host_only: 0
  566. [ 2.693473@0] Using Buffer DMA mode
  567. [ 2.693508@0] OTG VER PARAM: 1, OTG VER FLAG: 1
  568. [ 2.695847@0] Working on port type = OTG
  569. [ 2.699696@0] Current port type: SLAVE
  570. [ 2.703582@0] dwc_otg lm0: DWC OTG Controller
  571. [ 2.707774@0] dwc_otg lm0: new USB bus registered, assigned bus number 2
  572. [ 2.714421@0] dwc_otg lm0: irq 62, io mem 0x00000000
  573. [ 2.719338@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  574. [ 2.726224@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  575. [ 2.733509@0] usb usb2: Product: DWC OTG Controller
  576. [ 2.738371@0] usb usb2: Manufacturer: Linux 3.10.33 dwc_otg_hcd
  577. [ 2.744239@0] usb usb2: SerialNumber: lm0
  578. [ 2.748539@0] hub 2-0:1.0: USB hub found
  579. [ 2.752060@0] hub 2-0:1.0: 1 port detected
  580. [ 2.756324@0] Dedicated Tx FIFOs mode
  581. [ 2.760044@0] using timer detect id change, ed9eec00
  582. [ 2.764817@0] boot_device_flag : -1
  583. [ 2.768092@0] do not init nand
  584. [ 2.771857@0] Amlogic A/V streaming port init
  585. [ 2.776597@0] buffersize=262144,0,start=0
  586. [ 2.779400@0] Subtitle stbuf alloced at 0xece00000, size = 262144
  587. [ 2.785502@0] HOST mode
  588. [ 2.785528@1] Indeed it is in host mode hprt0 = 00021501
  589. [ 2.793127@0] changed the (2) buffer size from 0 to 262144
  590. [ 2.798756@0] init vdec memsource 9a00000->199fffff
  591. [ 2.803488@0] [tsync_pcr_init]init success.
  592. [ 2.807637@0] amvideocap_init_module
  593. [ 2.811180@0] amvideocap_probe,amvideocap
  594. [ 2.815129@0] -------hcd->flags.d32 = 0
  595. [ 2.818917@0] Init: Port Power? op_state=1
  596. [ 2.822947@0] Init1: Power Port (0)
  597. [ 2.826435@0] [RN5T618]rn5t618_otg_change, driver is not ready, do it later
  598. [ 2.826448@2] amvideocap_dev_register buf:1c300000,size:800000.
  599. [ 2.826728@2] regist mpeg12 codec profile
  600. [ 2.826790@2] regist mpeg4 codec profile
  601. [ 2.826792@2] amvdec_vc1 module init
  602. [ 2.826841@2] regist vc1 codec profile
  603. [ 2.826843@2] amvdec_h264 module init
  604. [ 2.826921@2] regist h264 codec profile
  605. [ 2.826923@2] amvdec_h264mvc module init
  606. [ 2.826972@2] regist hmvc codec profile
  607. [ 2.826974@2] amvdec_h264_4k2k module init
  608. [ 2.827024@2] regist h264_4k2k codec profile
  609. [ 2.827025@2] amvdec_h265 module init
  610. [ 2.827073@2] regist hevc codec profile
  611. [ 2.827133@2] regist mjpeg codec profile
  612. [ 2.827135@2] amvdec_real module init
  613. [ 2.827184@2] amvdec_avs module init
  614. [ 2.827308@2] amvenc_avc memory resource undefined.
  615. [ 2.827310@2] encode_wq_init.
  616. [ 2.827314@2] encode start monitor.
  617. [ 2.907387@0] set usb port power on (board gpio 109)!
  618. [ 2.907420@3] encode workqueue monitor start.
  619. [ 2.907619@2] jpegenc module init
  620. [ 2.907856@2] picdec buffer size is 4000000
  621. [ 2.908010@2] alloc_keep_buffer keep_y_addr eca00000
  622. [ 2.908029@2] alloc_keep_buffer keep_u_addr ecf00000
  623. [ 2.908039@2] alloc_keep_buffer keep_v_addr ece80000
  624. [ 2.908043@2] yaddr=eca00000,u_addr=ecf00000,v_addr=ece80000
  625. [ 2.908288@2] create_ge2d_work_queue video task ok
  626. [ 2.908292@2] video2_init enter
  627. [ 2.908667@2]
  628. [ 2.908667@2]
  629. [ 2.908667@2] VECM init
  630. [ 2.908667@2]
  631. [ 2.908863@2] efuse===========================================
  632. [ 2.908980@2] efuse: device efuse created
  633. [ 2.909041@2] efuse--------------------------------------------
  634. [ 2.909043@2] SARADC Driver init.
  635. [ 2.909155@2] __saradc_probe__
  636. [ 2.943870@1] usb 1-1: new high-speed USB device number 2 using dwc_otg
  637. [ 2.988523@0] Indeed it is in host mode hprt0 = 00001101
  638. [ 3.063967@2] saradc calibration: ref_val = 508
  639. [ 3.064009@2] saradc calibration: ref_nominal = 512
  640. [ 3.067689@2] saradc calibration: coef = 4002
  641. [ 3.072246@2] irblaster probe
  642. [ 3.075097@2] Remote Driver
  643. [ 3.077785@2] Remote platform_data g_remote_base=fe600580
  644. [ 3.083065@2] set drvdata completed
  645.  
  646. [ 3.086624@2] device_create_file completed
  647.  
  648. [ 3.091245@2] input: aml_keypad as /devices/platform/meson-remote/input/input0
  649. [ 3.098179@2] input_register_device completed
  650.  
  651. [ 3.102491@2] [0xffffff00] = 0x1dd0190
  652. [ 3.106174@2] [0xffffff04] = 0xf800ca
  653. [ 3.109780@2] [0xffffff08] = 0x82006e
  654. [ 3.113402@2] [0xffffff0c] = 0x3c0030
  655. [ 3.117035@2] [0xffffff10] = 0x30fa0013
  656. [ 3.120819@2] [0xffffff18] = 0x6f19000
  657. [ 3.124538@2] [0xffffff1c] = 0xbe40
  658. [ 3.127979@2] [0x0] = 0xfa00a0
  659. [ 3.130997@2] [0x4] = 0xfa00a0
  660. [ 3.134024@2] [0x8] = 0xfa00a0
  661. [ 3.137034@2] [0xc] = 0x640030
  662. [ 3.140053@2] [0x10] = 0x30fa0013
  663. [ 3.143330@2] [0x18] = 0x961b800
  664. [ 3.146531@2] [0x1c] = 0x9740
  665. [ 3.149454@2] [0x20] = 0x104
  666. [ 3.152300@2] [0x24] = 0x0
  667. [ 3.154983@2] [0x28] = 0x0
  668. [ 3.157649@2] set_remote_mode[69]
  669. [ 3.160943@2] remote config major:232
  670.  
  671. [ 3.164765@2] physical address:0x2d054000
  672. [ 3.168644@2] ADC Keypad Driver init.
  673. [ 3.172337@2] ==touch_ts_init==
  674. [ 3.175450@2] ==ft5x0x_ts_init==
  675. [ 3.178550@2] ==goodix_ts_init==
  676. [ 3.181758@2] i2c-core: driver [gslx680_compatible] using legacy suspend method
  677. [ 3.185143@0] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
  678. [ 3.185151@0] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  679. [ 3.185156@0] usb 1-1: Product: USB2.0 Hub
  680. [ 3.207120@2] i2c-core: driver [gslx680_compatible] using legacy resume method
  681. [ 3.207600@0] hub 1-1:1.0: USB hub found
  682. [ 3.207889@0] hub 1-1:1.0: 4 ports detected
  683. [ 3.222301@2] !!!ntp_ts: ret = 0.
  684. [ 3.225626@2] VTL ct36x TouchScreen driver, <george.chen@vtl.com.cn>.
  685. [ 3.232021@2] i2c-core: driver [ct36x] using legacy suspend method
  686. [ 3.238130@2] i2c-core: driver [ct36x] using legacy resume method
  687. [ 3.244168@2] VTL ct36x TouchScreen driver End.
  688. [ 3.248641@2] ==gsl_ts_init==
  689. [ 3.251600@2] ret=0
  690. [ 3.253718@2] ####################come here #####################
  691. [ 3.275646@2] up vfd key(103) registed.
  692. [ 3.275681@2] down vfd key(108) registed.
  693. [ 3.277821@2] right vfd key(106) registed.
  694. [ 3.281875@2] back vfd key(158) registed.
  695. [ 3.285852@2] left vfd key(105) registed.
  696. [ 3.289809@2] ok vfd key(232) registed.
  697. [ 3.293763@2] input: vfd_keypad as /devices/platform/m1-vfd.0/input/input1
  698. [ 3.300543@2] vfd config major:231
  699.  
  700. [ 3.304260@2] i2c-core: driver [mir3da] using legacy suspend method
  701. [ 3.310079@2] i2c-core: driver [mir3da] using legacy resume method
  702. [ 3.316247@2] i2c-core: driver [lis3dh_acc] using legacy suspend method
  703. [ 3.322757@2] i2c-core: driver [lis3dh_acc] using legacy resume method
  704. [ 3.329297@2] i2c-core: driver [bma222] using legacy suspend method
  705. [ 3.335447@2] i2c-core: driver [bma222] using legacy resume method
  706. [ 3.341610@2] i2c-core: driver [dmard06] using legacy suspend method
  707. [ 3.347866@2] i2c-core: driver [dmard06] using legacy resume method
  708. [ 3.354104@2] lsm303d driver: init
  709. [ 3.357481@2] i2c-core: driver [dmard10] using legacy suspend method
  710. [ 3.363726@2] i2c-core: driver [dmard10] using legacy resume method
  711. [ 3.363891@1] Indeed it is in host mode hprt0 = 00021501
  712. [ 3.375241@2] stk8313_init
  713. [ 3.377895@2] ======stk831x init ok======
  714. [ 3.381837@2] stk831x_init
  715. [ 3.384550@2] mxc622x accelerometer driver: init
  716. [ 3.389107@2] i2c-core: driver [mxc622x] using legacy suspend method
  717. [ 3.395390@2] i2c-core: driver [mxc622x] using legacy resume method
  718. [ 3.401593@2] mxc6255xc accelerometer driver: init
  719. [ 3.406371@2] i2c-core: driver [mxc6255xc] using legacy suspend method
  720. [ 3.412802@2] i2c-core: driver [mxc6255xc] using legacy resume method
  721. [ 3.419272@2] cm3217 v.1.0.0.1
  722. [ 3.422227@2] i2c-core: driver [elan_epl6814] using legacy suspend method
  723. [ 3.428942@2] i2c-core: driver [elan_epl6814] using legacy resume method
  724. [ 3.435609@2] i2c-core: driver [LTR501] using legacy suspend method
  725. [ 3.441782@2] i2c-core: driver [LTR501] using legacy resume method
  726. [ 3.448009@2] GPIO Keypad Driver init.
  727. [ 3.451701@2] ==gpio_key_probe==
  728. [ 3.454820@2] gpio request set to High-Z status
  729. [ 3.459308@2] reg:2620,clearmask=400040,setmask=1
  730. [ 3.464036@2] reg:2622,clearmask=ff0000,set pin=3
  731. [ 3.468693@2] reg:2623,clearmask=7000000,setmask=7
  732. [ 3.473448@2] reg:2620,clearmask=800080,setmask=10001
  733. [ 3.478525@2] reg:2622,clearmask=ff000000,set pin=3
  734. [ 3.483355@2] reg:2623,clearmask=70000000,setmask=7
  735. [ 3.488218@2] power key(116) registed.
  736. [ 3.488229@0] key 116 up
  737. [ 3.494556@2] input: gpio_keypad as /devices/platform/gpio_keypad.6/input/input2
  738. [ 3.501838@2] gpio keypad register input device completed.
  739. [ 3.507179@2] gpio keypad major:230
  740. [ 3.510757@2] spi_nor_init
  741. [ 3.513381@2] amlogic_spi_nor_probe:
  742. [ 3.516839@2] amlogic_spi->state_name:default
  743. [ 3.521227@2] AMLOGIC_SPI_NOR cc000000.spi: master is unqueued, this is deprecated
  744. [ 3.528723@2] check_storage_device : spi boot_device_flag : -1
  745. [ 3.534427@2] spi_nor_probe
  746. [ 3.537175@2] spi_nor_probe 629 boot_device_flag 2 : do not init spi
  747. [ 3.543478@2] spi_nor: probe of apollospi:32766 failed with error -12
  748. [ 3.543867@1] usb 2-1: new full-speed USB device number 2 using dwc_otg
  749. [ 3.544035@0] Indeed it is in host mode hprt0 = 00021501
  750. [ 3.561683@2] amlogic_spi_nor_probe over
  751. [ 3.565684@2] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
  752. [ 3.576277@1] host->base fe108c20
  753. [ 3.578268@1] pdata->caps 7
  754. [ 3.580991@1] pdata->caps2 0
  755. [ 3.583876@1] get property: port, value:0x00000001
  756. [ 3.590306@1] get property: ocr_avail, value:0x00200000
  757. [ 3.596787@1] get property: f_min, value:0x000493e0
  758. [ 3.603243@1] get property: f_max, value:0x02faf080
  759. [ 3.609722@1] get property: f_max_w, value:0x02faf080
  760. [ 3.616190@1] get property: max_req_size, value:0x00020000
  761. [ 3.622652@1] get property: irq_in, value:0x00000003
  762. [ 3.629128@1] get property: irq_out, value:0x00000005
  763. [ 3.635601@1] get property: gpio_cd, str:CARD_6
  764. [ 3.641540@1] get property: pinname, str:sd
  765. [ 3.647155@1] get property: jtag_pin, str:CARD_0
  766. [ 3.653095@1] get property: card_type, value:0x00000005
  767. [ NÅ]
  768. [ 3.863896@1]
  769. [ 3.863896@1]
  770. [ 3.863896@1]
  771. [ 3.903896@1] reg:2620,clearmask=80008,setmask=10001
  772. [ 3.903953@1] reg:2621,clearmask=ff000000,set pin=64
  773. [ 3.908223@1] reg:2623,clearmask=7000,setmask=7
  774. [ 3.912709@1] reg:2620,clearmask=200020,setmask=1
  775. [ 3.917451@1] reg:2622,clearmask=ff00,set pin=64
  776. [ 3.922022@1] reg:2623,clearmask=700000,setmask=7
  777. [ 3.926917@1] pdata->caps 107
  778. [ 3.929614@1] pdata->caps2 0
  779. [ 3.932460@1] get property: port, value:0x00000000
  780. [ 3.938964@1] get property: ocr_avail, value:0x00200000
  781. [ 3.945422@1] get property: f_min, value:0x000493e0
  782. [ 3.951866@1] get property: f_max, value:0x02faf080
  783. [ 3.955968@0] usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0718
  784. [ 3.955976@0] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=2
  785. [ 3.955981@0] usb 1-1.1: Product: USB Storage
  786. [ 3.955986@0] usb 1-1.1: SerialNumber: 000000000033
  787. [ 3.956605@0] usb-storage 1-1.1:1.0: USB Mass Storage device detected
  788. [ 3.988322@1] get property: max_req_size, value:0x00020000
  789. [ 3.994771@1] get property: pinname, str:sdio
  790. [ 4.000528@1] get property: card_type, value:0x00000003
  791. [ 4.007043@0] scsi0 : usb-storage 1-1.1:1.0
  792. [ 4.032997@0] sd: new high speed SDHC card at address 0007, clock 35416666, 1-bit-bus-width
  793. [ 4.036077@0] mmcblk0: sd:0007 SD4GB 3.70 GiB
  794. [ 4.065582@0] mmcblk0: p1
  795. [ 4.123850@1] [aml_sdio_probe] aml_sdio_probe() success!
  796. [ 4.125542@1] host->base fe108e00
  797. [ 4.126863@1] pdata->caps 80000547
  798. [ 4.130166@1] pdata->caps2 20
  799. [ 4.133094@1] get property: port, value:0x00000005
  800. [ 4.139581@1] get property: ocr_avail, value:0x00200080
  801. [ 4.146043@1] get property: f_min, value:0x000493e0
  802. [ 4.152500@1] get property: f_max, value:0x05f5e100
  803. [ 4.158980@1] get property: max_req_size, value:0x00020000
  804. [ 4.165452@1] get property: pinname, str:emmc
  805. [ 4.171217@1] get property: card_type, value:0x00000001
  806. [ 4.177697@1] get property: gpio_dat3, str:BOOT_3
  807. [ 4.183638@1] [is_emmc_exist] host->storage_flag=2, POR_BOOT_VALUE=3
  808. [ 4.223870@0] aml_emmc_hw_reset 1338
  809. [ 4.231698@2] mmc_init_card
  810. [ 4.283847@1] [aml_sdhc_probe] aml_sdhc_probe() success!
  811. [ 4.283976@1] [dsp]DSP start addr 0xc5e00000
  812. [ 4.287774@1] [dsp]register dsp to char divece(257)
  813. [ 4.292890@1] amlogic audio spdif interface device init!
  814. [ 4.297929@1] device name=nand_key open error
  815. [ 4.302240@1] aml_keys: version 0 can not be init c0c49ce8
  816. [ 4.307684@1] device name=emmc_key open error
  817. [ 4.312071@1] aml_keys: version 0 can not be init c0c49ce8
  818. [ 4.318185@1] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0
  819. [ 4.326907@1] input: rn5t618_pmu as /devices/i2c-0/0-0032/rn5t618_pmu.0/input/input3
  820. [ 4.331351@1] [RN5T618] NO BATTERY_PARAMETERS FOUND
  821. [ 4.336069@1] [RN5T618]no battery, exit
  822. [ 4.345067@1] vdin_drv_init: major 228
  823. [ 4.345320@1] vdin0 mem_start = 0x19a00000, mem_size = 0x100000
  824. [ 4.349430@1] vdin_drv_probe: driver initialized ok
  825. [ 4.354415@1] vdin1 mem_start = 0x19b00000, mem_size = 0x1000000
  826. [ 4.360207@1] vdin_drv_probe: driver initialized ok
  827. [ 4.365133@1] amvdec_656in module: init.
  828. [ 4.368912@1] amvdec_656in_init_module:major 227
  829. [ 4.373782@1] amvdec_656in probe ok.
  830. [ 4.377339@1] amvdec_csi probe ok.
  831. [ 4.380400@1] [viuin..]viuin_init_module viuin module init
  832. [ 4.385991@1] [viuin..]viuin_probe probe ok.
  833. [ 4.390292@1] [isp..]isp_probe isp probe ok.
  834. [ 4.394302@1] [sii9233a_drv_init] Ver: 2013Nov12
  835. [ 4.399840@1] amaudio2: device amaudio2 created
  836. [ 4.403508@1] Error: Didn't get power valid value --- wifi_power_probe 376
  837. [ 4.410156@1] Error: Didn't get suspend_power_off value --- wifi_power_probe 393
  838. [ 4.417482@1] wifi_power power_gpio is 6
  839. [ 4.421351@1] wifi_power power_gpio2 is 123
  840. [ 4.425709@1] amlogic rfkill init
  841. [ 4.428831@1] not get gpio_en
  842. [ 4.431698@1] not get gpio_wake
  843. [ 4.463955@1] wifi_request_32k_clk : OFF-->ON for bt_rfkill
  844. [ 4.464004@1] clock_32k_pin(122) : (null)
  845. [ 4.467864@1] clock_32k_pin(122) : sdio_wifi
  846. [ 4.548613@2] emmc: BKOPS_EN bit is not set
  847. [ 4.548652@2] ###check hw reset function is already enabled here
  848. [ 4.553852@2] Activate high speed
  849. [ 4.567068@2] emmc: new HS200 MMC card at address 0001, clock 85000000, 8-bit-bus-width
  850. [ 4.569765@2] mmcblk1: emmc:0001 NCard 28.9 GiB
  851. [ 4.574269@2] mmcblk1boot0: emmc:0001 NCard partition 1 4.00 MiB
  852. [ 4.575454@1] aml_aes aml_aes: Aml AES
  853. [ 4.575943@1] aml_tdes aml_tdes: Aml TDES
  854. [ 4.576312@1] usbcore: registered new interface driver snd-usb-audio
  855. [ 4.576625@1] enter rt5616_modinit
  856. [ 4.576758@1] dummy_codec_platform_probe
  857. [ 4.576912@1] == ES8323 == es8323_modinit()
  858. [ 4.577377@1] i2s get no clk src setting in dts, use the default mpll 0
  859. [ 4.577386@1] [aml-i2s-dai]enterd aml_i2s_dai_probe,old_samplerate:0,sample_rate=48000
  860. [ 4.577574@1] [aml-spdif-dai]enter aml_dai_spdif_init
  861. [ 4.577580@1] [aml-spdif-dai]enterd aml_spdif_play,set_clock:-1,sample_rate=4
  862. [ 4.577582@1] audio_set_958_clk, freq=4,
  863. [ 4.577591@1] IEC958 16bit
  864. [ 4.577595@1] hdmitx: audio: aout notify rate 48000
  865. [ 4.577598@1] hdmitx: audio: aout notify size 16
  866. [ 4.577601@1] hdmitx: audio: aout notify format CT_PCM
  867. [ 4.577605@1] hdmitx: audio: audio channel num is 1
  868. [ 4.577612@1] hdmitx: audio: SPDIF
  869. [ 4.577625@1] hdmitx: audio: current VIC: 16
  870. [ 4.577627@1] hdmitx: audio: audio sample rate: 3
  871. [ 4.577630@1] hdmitx: audio: set audio N para
  872. [ 4.577638@1] hdmitx: audio: PCM out to HDMI
  873. [ 4.577641@1] hdmitx: audio: i2s_to_spdif_flag:1
  874. [ 4.577643@1] hdmitx: audio: Enable audio spdif to HDMI
  875. [ 4.577649@1] hdmitx: audio: Audio Type: PCM
  876. [ 4.577705@1] hdmitx: audio: set audio param
  877. [ 4.577781@1] [aml-spdif-dai]aml_spdif_probe
  878. [ 4.577914@1] test codec dummy_codec
  879. [ 4.577918@1] using external codec, index = 1
  880. [ 4.577920@1] using external dummy codec
  881. [ 4.578032@1] enter spdif_dit_probe
  882. [ 4.578033@1] aml_spdif_unmute
  883. [ 4.578223@1] codec_name = dummy_codec.0
  884. [ 4.578669@1] p_aml_audio->hp_disable=1
  885. [ 4.578672@1] falied to get spk event delay time paraments from dts file
  886. [ 4.578674@1] spk_event delay_time = 0
  887. [ 4.737918@2] mmcblk1boot1: emmc:0001 NCard partition 2 4.00 MiB
  888. [ 4.742276@1] aml-i2s 0:playback preallocate_dma_buffer: area=ef300000, addr=2f500000, size=524288
  889. [ 4.753176@1] aml-i2s 1:capture preallocate_dma_buffer: area=ef240000, addr=2f440000, size=65536
  890. [ 4.755159@2] mmcblk1: p1
  891. [ 4.763963@1] aml_snd_m8 aml_m8_sound_card.5: dummy_codec <-> aml-i2s-dai.0 mapping ok
  892. [ 4.764224@2] Delete invalid mbr partition part ed08f000, part->partno 1
  893. [ 4.764579@2] emmc read lba=0x12000, blocks=0x1 OK!
  894. [ 4.764746@2] emmc read lba=0x12001, blocks=0x1 OK!
  895. [ 4.764750@2] [mmc_read_partition_tbl] mmc read partition OK!
  896. [ 4.764752@2] add_emmc_partition
  897. [ 4.764890@2] [mmcblk1p01] bootloader offset 0x000000000000, size 0x000000400000
  898. [ 4.765021@2] [mmcblk1p02] reserved offset 0x000002400000, size 0x000004000000
  899. [ 4.765157@2] [mmcblk1p03] cache offset 0x000006c00000, size 0x000020000000
  900. [ 4.765284@2] [mmcblk1p04] env offset 0x000027400000, size 0x000000800000
  901. [ 4.765414@2] [mmcblk1p05] logo offset 0x000028400000, size 0x000002000000
  902. [ 4.765542@2] [mmcblk1p06] recovery offset 0x00002ac00000, size 0x000002000000
  903. [ 4.765672@2] [mmcblk1p07] misc offset 0x00002d400000, size 0x000002000000
  904. [ 4.765805@2] [mmcblk1p08] boot offset 0x00002fc00000, size 0x000002000000
  905. [ 4.765936@2] [mmcblk1p09] system offset 0x000032400000, size 0x000040000000
  906. [ 4.766063@2] [mmcblk1p10] data offset 0x000072c00000, size 0x0006c7400000
  907. [ 4.766086@2] card key: card_blk_probe.
  908. [ 4.766091@2] emmc_key_init:428 emmc key lba_start:0x12020,lba_end:0x12220
  909. [ 4.766095@2] i=0,register --- emmc_key
  910. [ 4.766098@2] emmc key: emmc_key_init:450 ok.
  911. [ 4.766125@2] Exit aml_emmc_partition_ops OK.
  912. [ 4.766997@2] mmcblk1boot1: p1
  913. [ 4.767014@2] mmcblk1boot1: p1 start 16065 is beyond EOD, truncated
  914. [ 4.767759@2] mmcblk1boot0: p1
  915. [ 4.767774@2] mmcblk1boot0: p1 start 16065 is beyond EOD, truncated
  916. [ 4.924492@1] aml-i2s 0:playback preallocate_dma_buffer: area=ef400000, addr=2f600000, size=524288
  917. [ 4.931920@1] aml-i2s 1:capture preallocate_dma_buffer: area=ef260000, addr=2f460000, size=65536
  918. [ 4.940240@1] aml_snd_m8 aml_m8_sound_card.5: dit-hifi <-> aml-spdif-dai.0 mapping ok
  919. [ 4.949179@1] -----ext_codec=1---
  920. [ 4.951345@1] =aml_m8_pinmux_init==,aml_m8_pinmux_init done,---0
  921. [ 4.957441@1] GACT probability NOT on
  922. [ 4.960909@1] Mirror/redirect action on
  923. [ 4.964714@1] u32 classifier
  924. [ 4.967544@1] Actions configured
  925. [ 4.971083@1] Netfilter messages via NETLINK v0.30.
  926. [ 4.975970@1] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  927. [ 4.982644@1] ctnetlink v0.93: registering with nfnetlink.
  928. [ 4.987641@1] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  929. [ 4.994640@1] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  930. [ 5.000996@1] xt_time: kernel timezone is -0000
  931. [ 5.005192@1] ipip: IPv4 over IPv4 tunneling driver
  932. [ 5.010444@1] ip_tables: (C) 2000-2006 Netfilter Core Team
  933. [ 5.015511@1] arp_tables: (C) 2002 David S. Miller
  934. [ 5.020112@1] TCP: cubic registered
  935. [ 5.023521@1] Initializing XFRM netlink socket
  936. [ 5.028385@1] NET: Registered protocol family 10
  937. [ 5.033239@1] mip6: Mobile IPv6
  938. [ 5.035638@1] ip6_tables: (C) 2000-2006 Netfilter Core Team
  939. [ 5.041329@1] sit: IPv6 over IPv4 tunneling driver
  940. [ 5.046740@1] NET: Registered protocol family 17
  941. [ 5.050456@1] NET: Registered protocol family 15
  942. [ 5.055091@1] Bridge firewalling registered
  943. [ 5.059240@1] Bluetooth: RFCOMM TTY layer initialized
  944. [ 5.064187@1] Bluetooth: RFCOMM socket layer initialized
  945. [ 5.069407@1] Bluetooth: RFCOMM ver 1.11
  946. [ 5.073288@1] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  947. [ 5.078738@1] Bluetooth: BNEP filters: protocol multicast
  948. [ 5.084087@1] Bluetooth: BNEP socket layer initialized
  949. [ 5.089158@1] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  950. [ 5.095211@1] Bluetooth: HIDP socket layer initialized
  951. [ 5.100314@1] l2tp_core: L2TP core driver, V2.0
  952. [ 5.104790@1] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  953. [ 5.109684@1] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
  954. [ 5.115427@1] l2tp_netlink: L2TP netlink interface
  955. [ 5.120144@1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
  956. [ 5.126191@1] l2tp_debugfs: L2TP debugfs support
  957. [ 5.130729@1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
  958. [ 5.137337@1] NET: Registered protocol family 35
  959. [ 5.142818@1] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  960. [ 5.149633@1] Registering SWP/SWPB emulation handler
  961. [ 5.154549@1] enter meson_pm_init
  962. [ 5.157970@1] enter meson_pm_probe!
  963. [ 5.161267@1] meson_pm_probe done !
  964. [ 5.165434@1] file system registered
  965. [ 5.169130@1] android_usb gadget: Mass Storage Function, version: 2009/09/11
  966. [ 5.175260@1] android_usb gadget: Number of LUNs=2
  967. [ 5.179982@1] lun0: LUN: removable file: (no medium)
  968. [ 5.184996@1] lun1: LUN: removable file: (no medium)
  969. [ 5.190205@1] android_usb gadget: android_usb ready
  970. [ 5.195248@1] aml_rtc rtc.0: setting system clock to 1970-01-01 00:00:00 UTC (0)
  971. [ 5.202169@1] ### dt-test ### No testcase data in device tree; not running tests
  972. [ 5.209615@1] meson_cpufreq: no voltage_control prop
  973. [ 5.214406@1] voltage_control = 0
  974. [ 5.218709@1] <<-GTP-INFO->> GTP driver installing...
  975. [ 5.222746@1] hdmitx: cec: CEC init
  976. [ 5.226286@1] input: cec_input as /devices/virtual/input/input4
  977. [ 5.232052@1] hdmitx: cec: hdmitx_device->cec_init_ready:0x1[ 5.237432@1] hdmitx: cec: CEC task process
  978.  
  979. [ 5.2[ 5.263839@1] Changing uart_ao_ttyS0: baud from 0 to 115200
  980. [ 5.283966@1] Freeing unused kernel memory: 380K (c0b92000 - c0bf1000)
  981. [ 5.306395@2] init: aml-firstboot-init insert aml-firstboot-init
  982. [ 5.307216@2] init: command 'loglevel 7' action=early-init status=0 (init.amlogic.board.rc:4)
  983. [ 5.319828@0] gpu cooling register okay with err=0
  984. [ 5.319989@0] gpu core cooling register okay with err=0
  985. [ 5.325233@0] Mali: Mali device driver loaded
  986. [ 5.329560@0] init: command 'insmod /boot/mali.ko mali_debug_level=2 mali_shared_mem_size=0x40000000' action=early-init status=0 (init.amlogic.board.rc:9)
  987. [ 5.343266@0] init: processing action 0xb646c940 (wait_for_coldboot_done)
  988. [ 5.349942@0] init: wait for /dev/.coldboot_done
  989. [ 5.374680@0] init: command 'wait_for_coldboot_done' action=wait_for_coldboot_done status=0 ((null):0)
  990. [ 5.378374@0] init: processing action 0xb646c970 (mix_hwrng_into_linux_rng)
  991. [ 5.385373@0] init: Mixed 512 bytes from /dev/hw_random into /dev/urandominit: command 'mix_hwrng_into_linux_rng' action=mix_hwrng_into_linux_rng status=0 ((null):0)
  992. [ 5.399922@0] init: processing action 0xb646c9a0 (keychord_init)
  993. [ 5.405875@0] init: command 'keychord_init' action=keychord_init status=0 ((null):0)
  994. [ [ 5.419505@0] init: command 'console_init' action=console_init status=0 ((null):0)
  995. [ 5.421437@0] init: processing action 0xb64460a0 (init)
  996. [ 5.426689@0] init: command 'sysclktz 0' action=init status=0 (/init.rc:33)
  997. [ 5.436617@0] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
  998. [ 5.441632@0] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
  999. [ 5.451482@0] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
  1000. [ 5.459582@0] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
  1001. [ 5.469415@0] init: enter do_confirm_formated /dev/block/data, /data
  1002. [ 5.475710@0] init: do_confirm_formated ext4 try mount
  1003. [ 5.483047@0] force enable DISCARD here for ext4 fs
  1004. [ 5.661956@0] EXT4-fs (mmcblk1p10): recovery complete
  1005. [ 5.662878@0] checked enable EXT4 DISCARD here
  1006. [ 5.665812@0] EXT4-fs (mmcblk1p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  1007. [ 5.677765@0] init: enter do_confirm_formated /dev/block/cache, /cache
  1008. [ 5.681305@0] init: do_confirm_formated ext4 try mount
  1009. [ 5.686799@0] force enable DISCARD here for ext4 fs
  1010. [ 5.701526@0] EXT4-fs (mmcblk1p3): recovery complete
  1011. [ 5.702565@0] checked enable EXT4 DISCARD here
  1012. [ 5.705289@0] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  1013. [ 5.716618@1] force enable DISCARD here for ext4 fs
  1014. [ 5.722483@1] checked enable EXT4 DISCARD here
  1015. [ 5.723449@1] EXT4-fs (mmcblk1p9): mounted filesystem with ordered data mode. Opts: (null)
  1016. [ 5.731705@1] fs_mgr: __mount(source=/dev/block/system,target=/system,type=ext4)=0
  1017. [ 5.739571@1] force enable DISCARD here for ext4 fs
  1018. [ 5.743990@1] EXT4-fs (mmcblk1p10): Ignoring removed nomblk_io_submit option
  1019. [ 5.756084@1] checked enable EXT4 DISCARD here
  1020. [ 5.756113@1] EXT4-fs (mmcblk1p10): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
  1021. [ 5.766084@1] fs_mgr: check_fs(): mount(/dev/block/data,/data,ext4)=0
  1022. [ 5.774346@1] fs_mgr: Running /system/bin/e2fsck on /dev/block/data
  1023. [ 5.846954@1] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
  1024. [ 5.847015@1] e2fsck: /dev/block/data: clean, 1340/1777664 files, 404695/7107584 blocks
  1025. [ 5.854364@1] force enable DISCARD here for ext4 fs
  1026. [ 5.858790@1] EXT4-fs (mmcblk1p10): Ignoring removed nomblk_io_submit option
  1027. [ 5.870914@1] checked enable EXT4 DISCARD here
  1028. [ 5.870943@1] EXT4-fs (mmcblk1p10): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
  1029. [ 5.880464@1] fs_mgr: __mount(source=/dev/block/data,target=/data,type=ext4)=0
  1030. [ 5.887994@1] force enable DISCARD here for ext4 fs
  1031. [ 5.892425@1] EXT4-fs (mmcblk1p3): Ignoring removed nomblk_io_submit option
  1032. [ 5.903473@1] checked enable EXT4 DISCARD here
  1033. [ 5.903720@1] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
  1034. [ 5.914356@1] fs_mgr: check_fs(): mount(/dev/block/cache,/cache,ext4)=0
  1035. [ 5.921942@1] fs_mgr: Running /system/bin/e2fsck on /dev/block/cache
  1036. [ 5.935959@1] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
  1037. [ 5.936006@1] e2fsck: /dev/block/cache: clean, 16/32768 files, 4211/131072 blocks
  1038. [ 5.942808@1] force enable DISCARD here for ext4 fs
  1039. [ 5.947306@1] EXT4-fs (mmcblk1p3): Ignoring removed nomblk_io_submit option
  1040. [ 5.958418@1] checked enable EXT4 DISCARD here
  1041. [ 5.958575@1] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
  1042. [ 5.968790@1] fs_mgr: __mount(source=/dev/block/cache,target=/cache,type=ext4)=0
  1043. [ 5.999980@3] binder: 130:130 transaction failed 29189, size 0-0
  1044. [ 6.099709@3] logd.auditd: start
  1045. [ 6.128311@0] buf[0]=f5,buf[1]=af,err=4
  1046. [ 6.128356@0] M8M2:adc=383,TS_C=21,flag=1
  1047. [ 6.130511@0] efuse_flag=a
  1048. [ 6.133182@0] amlogic_thermal_probe, this chip is trimmed, use thermal
  1049. [ 6.139709@0] amlogic-thermal aml_thermal: amlogic thermal probe start
  1050. [ 6.146198@0] #thermal-cells=7
  1051. [ 6.149141@0] keep_mode is disabled
  1052. [ 6.152578@0] pdata->temp_trip_count=4
  1053. [ 6.156316@0] temperature=70 on trip point=0
  1054. [ 6.160534@0] fixing high_freq=1608001 to 1608000 at trip point 0,level=2
  1055. [ 6.167250@0] fixing low_freq=1608001 to 1608000 at trip point 0,level=2
  1056. [ 6.173916@0] gpu[0].gpu_high_freq=511,tmp_level[0].gpu_high_freq=511
  1057. [ 6.180285@0] cpu[0] core num==3
  1058. [ 6.183464@0] gpu[0] core num==5
  1059. [ 6.186683@0] temperature=80 on trip point=1
  1060. [ 6.190881@0] fixing high_freq=1200001 to 1200000 at trip point 1,level=6
  1061. [ 6.197610@0] fixing low_freq=1200001 to 1200000 at trip point 1,level=6
  1062. [ 6.204271@0] gpu[1].gpu_high_freq=435,tmp_level[1].gpu_high_freq=435
  1063. [ 6.210639@0] cpu[1] core num==2
  1064. [ 6.213814@0] gpu[1] core num==4
  1065. [ 6.217038@0] temperature=90 on trip point=2
  1066. [ 6.221256@0] fixing high_freq=800001 to 696000 at trip point 2,level=11
  1067. [ 6.227899@0] fixing low_freq=800001 to 696000 at trip point 2,level=11
  1068. [ 6.234488@0] gpu[2].gpu_high_freq=328,tmp_level[2].gpu_high_freq=328
  1069. [ 6.240851@0] cpu[2] core num==2
  1070. [ 6.244073@0] gpu[2] core num==3
  1071. [ 6.247214@0] temperature=260 on trip point=3
  1072. [ 6.251517@0] fixing high_freq=-1 to -22 at trip point 3,level=-1
  1073. [ 6.257550@0] fixing low_freq=-1 to -22 at trip point 3,level=-1
  1074. [ 6.263500@0] gpu[3].gpu_high_freq=-1,tmp_level[3].gpu_high_freq=-1
  1075. [ 6.269742@0] cpu[3] core num==-1
  1076. [ 6.272990@0] gpu[3] core num==-1
  1077. [ 6.276303@0] idle interval=1000
  1078. [ 6.279467@0] pdata->name:aml_thermal, pdata:ed0fee00
  1079. [ 6.284502@0] amlogic_thermal_init_from_dts, 998
  1080. [ 6.289036@0] amlogic_thermal_initialize, 1014, pdata:ed0fee00
  1081. [ 6.295659@0] tmp_trip[0].cpu_core_upper=1
  1082. [ 6.298888@0] tmp_trip[1].cpu_core_upper=2
  1083. [ 6.302941@0] tmp_trip[2].cpu_core_upper=2
  1084. [ 6.307035@0] tmp_trip[3].cpu_core_upper=-1
  1085. [ 6.311166@0] aml_thermal bind thermal-cpucore-0 okay !
  1086. [ 6.316347@0] aml_thermal bind thermal-cpufreq-0 okay !
  1087. [ 6.321471@0] tmp_trip[0].gpu_core_upper=1
  1088. [ 6.325562@0] tmp_trip[1].gpu_core_upper=2
  1089. [ 6.329579@0] tmp_trip[2].gpu_core_upper=3
  1090. [ 6.333651@0] tmp_trip[3].gpu_core_upper=-1
  1091. [ 6.337800@0] aml_thermal bind thermal-gpucore-0 okay !
  1092. [ 6.342957@0] pdata->tmp_trip[0].gpu_lower_level=1
  1093. [ 6.347698@0] pdata->tmp_trip[0].gpu_upper_level=1
  1094. [ 6.352436@0] pdata->tmp_trip[1].gpu_lower_level=2
  1095. [ 6.356240@1] [RN5T618]battery vol change: 0->0
  1096. [ 6.361794@0] pdata->tmp_trip[1].gpu_upper_level=2
  1097. [ 6.366514@0] pdata->tmp_trip[2].gpu_lower_level=3
  1098. [ 6.371221@0] pdata->tmp_trip[2].gpu_upper_level=3
  1099. [ 6.375997@0] pdata->tmp_trip[3].gpu_lower_level=-1
  1100. [ 6.380794@0] pdata->tmp_trip[3].gpu_upper_level=-1
  1101. [ 6.385648@0] aml_thermal bind thermal-gpufreq-0 okay !
  1102. [ 6.390927@0] amlogic: Kernel Thermal management registered
  1103. [ 6.396351@0] amlogic-thermal aml_thermal: amlogic thermal probe done
  1104. [ 6.404952@0] video first pts = 0
  1105. [ 6.406351@0] IEC958 16bit
  1106. [ 6.408695@0] hdmitx: audio: aout notify rate 48000
  1107. [ 6.413501@0] hdmitx: audio: aout notify size 16
  1108. [ 6.418099@0] hdmitx: audio: no update
  1109. [ 6.421779@0] aml_i2s_close device type 4
  1110. [ 6.425996@0] scsi 0:0:0:0: Direct-Access USB TO I DE/SATA Device 0016 PQ: 0 ANSI: 4
  1111. [ 6.434408@3] IEC958 16bit
  1112. [ 6.436683@3] hdmitx: audio: aout notify rate 48000
  1113. [ 6.437722@1] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
  1114. [ 6.438733@1] sd 0:0:0:0: [sda] Asking for cache data failed
  1115. [ 6.438736@1] sd 0:0:0:0: [sda] Assuming drive cache: write through
  1116. [ 6.442611@1] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
  1117. [ 6.443599@1] sd 0:0:0:0: [sda] Asking for cache data failed
  1118. [ 6.443602@1] sd 0:0:0:0: [sda] Assuming drive cache: write through
  1119. [ 6.443606@1] sd 0:0:0:0: [sda] Attached SCSI disk
  1120. [ 6.482520@3] hdmitx: audio: aout notify size 16
  1121. [ 6.487057@3] hdmitx: audio: no update
  1122. [ 6.490757@3] aml_i2s_close device type 8
  1123. [ 6.495371@3] aml_i2s_close device type 1
  1124. [ 6.497548@2] read descriptors
  1125. [ 6.497554@2] read strings
  1126. [ 6.504725@3] IEC958 16bit
  1127. [ 6.507232@3] hdmitx: audio: aout notify rate 48000
  1128. [ 6.512060@3] hdmitx: audio: aout notify size 16
  1129. [ 6.516655@3] hdmitx: audio: no update
  1130. [ 6.520342@3] aml_i2s_close device type 2
  1131. [ 6.526336@3] name=emmc_key nand_key
  1132. [ 6.527927@3] device name=nand_key open error
  1133. [ 6.532330@3] aml_keys: version 0 can not be init c0c49ce8
  1134. [ 6.537785@3] name=emmc_key emmc_key
  1135. [ 6.543581@2] emmc read lba=0x12020, blocks=0x100 OK!
  1136. [ 6.546632@2] register_aes_algorithm:488,new way
  1137. [ 6.551819@2] vfm_map_store:rm default
  1138. [ 6.555303@2] vfm_map_store:add default decoder ppmgr deinterlace amvideo
  1139. [ 6.561914@2] init: property 'ro.usb.vendor.string' doesn't exist while expanding '${ro.usb.vendor.string}'
  1140. [ 6.571240@2] init: cannot expand '${ro.usb.vendor.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/vendor_string'
  1141. [ 6.584077@2] init: property 'ro.usb.product.string' doesn't exist while expanding '${ro.usb.product.string}'
  1142. [ 6.593883@0] init: cannot expand '${ro.usb.product.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/product_string'
  1143. root@T8SPlus:/ # [ 6.610080@2] init: property 'ro.usb.vendor.string' doesn't exist while expanding '${ro.usb.vendor.string}'
  1144. [ 6.617000@2] init: cannot expand '${ro.usb.vendor.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/vendor_string'
  1145. [ 6.629442@2] init: property 'ro.usb.product.string' doesn't exist while expanding '${ro.usb.product.string}'
  1146. [ 6.639233@2] init: cannot expand '${ro.usb.product.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/product_string'
  1147. [ 6.652624@2] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
  1148. [ 6.659363@2] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
  1149. [ 6.667557@2] init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery'
  1150. [ 6.679958@2] android_usb: already disabled
  1151. [ 6.680186@2] mtp_bind_config
  1152. [ 6.682390@0] WARN::dwc_otg_handle_mode_mismatch_intr:167: Mode Mismatch Interrupt: currently in Host mode
  1153. [ 6.682390@0]
  1154. [ 6.692882@2] WARN::ep_dequeue:413: bogus device state
  1155. [ 6.692882@2]
  1156. [ 6.692891@0] WARN::dwc_otg_handle_mode_mismatch_intr:167: Mode Mismatch Interrupt: currently in Host mode
  1157. [ 6.692891@0]
  1158. [ 6.711190@2] mtp_bind_config
  1159. [ 6.714004@0] WARN::dwc_otg_handle_mode_mismatch_intr:167: Mode Mismatch Interrupt: currently in Host mode
  1160. [ 6.714004@0]
  1161. [ 6.848933@0] dig: data_integrity_guard main!
  1162. [ 6.865013@2] cur_mode = 0
  1163. [ 6.865041@2] [0x0] = 0x1dd0190
  1164. [ 6.865201@2] [0x4] = 0xf800ca
  1165. [ 6.868220@2] [0x8] = 0x82006e
  1166. [ 6.871242@2] [0xc] = 0x3c0030
  1167. [ 6.879466@0] Adding 511996k swap on /dev/block/zram0. Priority:-1 extents:1 across:511996k SS
  1168. [ 6.881866@2] [0x10] = 0x30fa0013
  1169. [ 6.881867@2] [0x18] = 0x6f19000
  1170. [ 6.881870@2] [0x1c] = 0x9f40
  1171. [ 6.881872@2] [0x20] = 0x0
  1172. [ 6.881873@2] [0x24] = 0x0
  1173. [ 6.881874@2] [0x28] = 0x0
  1174. [ 6.881876@2] set_remote_mode[69]
  1175. [ 6.916830@0] warning: `su' uses 32-bit capabilities (legacy support in use)
  1176. [ 6.935261@3] EXT4-fs (mmcblk1p9): re-mounted. Opts: (null)
  1177. [ 6.969556@3] tvmode set to 1080p
  1178. [ 6.969589@3] don't set the same mode as current.
  1179. [ 7.024981@3] buf=0
  1180. [ 7.024985@3] IEC958_mode_raw=0
  1181. [ 7.025120@3] osd0=>x:0 ,y:0,w:1920,h:1080
  1182. [ 7.025120@3] osd1=> x:0,y:0,w:18,h:18
  1183. [ 7.033978@3] EXT4-fs (mmcblk1p9): re-mounted. Opts: (null)
  1184. [ 7.058328@3] osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE
  1185. [ 7.060458@3] osd[1].scaledata: 1920 1920 1080 1080
  1186. [ 7.069318@1] osd[1].pandata: 0 0 0 0
  1187. [ 7.111815@3] EXT4-fs (mmcblk1p9): re-mounted. Opts: (null)
  1188. [ 7.133965@3] init: untracked pid 240 exited with status 0
  1189. [ 9.038256@1] force enable DISCARD here for ext4 fs
  1190. [ 9.038719@1] checked enable EXT4 DISCARD here
  1191. [ 9.041998@1] EXT4-fs (zram0): mounting with "discard" option, but the device does not support discard
  1192. [ 9.051380@1] EXT4-fs (zram0): mounted filesystem with ordered data mode. Opts: (null)
  1193. [ 9.214417@2] CPU3: shutdown
  1194. [ 9.354337@0] CPU2: shutdown
  1195. [ 10.946590@0] request_suspend_state: wakeup (3->0) at 10832760000 (1970-01-01 00:00:06.251354000 UTC)
  1196. [ 10.950139@0] request_suspend_state,169,old_sleep=0,new_state=0
  1197. [ 11.645572@1] vout [tv_set_vframe_rate_end_hint] return mode = 15, policy = 1!
  1198. [ 11.647146@1] vout [framerate_automation_set_mode] mode_target = 15
  1199. [ 11.653490@1] +++++++++++++++++framerate_automation_set_mode[1128]auto_mode=0++++++++++++++++
  1200. [ 24.843957@0] write pen_release: 2
  1201. [ 25.566917@2] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
  1202. [ 25.568574@2] lowmemorykiller: oom_adj 0 => oom_score_adj 0
  1203. [ 25.574109@2] lowmemorykiller: oom_adj 1 => oom_score_adj 58
  1204. [ 25.579703@2] lowmemorykiller: oom_adj 2 => oom_score_adj 117
  1205. [ 25.585422@2] lowmemorykiller: oom_adj 3 => oom_score_adj 176
  1206. [ 25.585424@2] lowmemorykiller: oom_adj 9 => oom_score_adj 529
  1207. [ 25.585425@2] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
  1208. [ 26.121123@0] acc_open
  1209. [ 26.121135@0] acc_release
  1210. [ 26.290849@0] eth0: device MAC address 00:01:db:8a:02:54
  1211. [ 26.303365@0] mask interrupts MMC
  1212. [ 26.303367@0] mask interrupts MMC
  1213. [ 26.303371@0] mask interrupts MMC
  1214. [ 26.303392@0] stmmac_open: failed PTP initialisation
  1215. [ 26.783644@2] avc open
  1216. [ 26.787104@2] amvenc_avc check CMA pool sucess, max instance: 1.
  1217. [ 26.788076@2] amvenc_avc_open: allocating phys 2dc00000, size 18432k, wq:e9f73200.
  1218. [ 26.788081@2] amvenc_avc memory config sucess, buff start:0x2dc00000, size is 0x1200000, wq:e9f73200.
  1219. [ 26.788135@2] avc release, wq:e9f73200
  1220. [ 26.788139@2] remove encode_work_queue e9f73200 sucess, destroy_encode_work_queue line 2408.
  1221. [ 26.802571@2] ionvideo open
  1222. [ 26.802580@2] ionvideo_stop_generating!!!!
  1223. [ 26.802589@2] ionvideo release
  1224. [ 26.804445@1] ionvideo open
  1225. [ 26.804452@1] ionvideo_stop_generating!!!!
  1226. [ 26.804460@1] ionvideo release
  1227. [ 26.814408@1] ionvideo open
  1228. [ 26.814414@1] ionvideo_stop_generating!!!!
  1229. [ 26.814423@1] ionvideo release
  1230. [ 26.815600@2] ionvideo open
  1231. [ 26.815606@2] ionvideo_stop_generating!!!!
  1232. [ 26.815615@2] ionvideo release
  1233. [ 26.827963@1] ionvideo open
  1234. [ 26.827970@1] ionvideo_stop_generating!!!!
  1235. [ 26.827978@1] ionvideo release
  1236. [ 26.829250@1] ionvideo open
  1237. [ 26.829256@1] ionvideo_stop_generating!!!!
  1238. [ 26.829265@1] ionvideo release
  1239. [ 26.835152@1] ionvideo open
  1240. [ 26.835159@1] ionvideo_stop_generating!!!!
  1241. [ 26.835166@1] ionvideo release
  1242. [ 26.840747@1] ionvideo open
  1243. [ 26.840753@1] ionvideo_stop_generating!!!!
  1244. [ 26.840761@1] ionvideo release
  1245. [ 26.996412@0] Digital output mode: 0 - PCM
  1246. [ 26.997970@0] Digital output mode: 0 - PCM
  1247. [ 27.013331@0] Digital output mode: 0 - PCM
  1248. [ 27.844095@0] write pen_release: 3
  1249. [ 29.305995@0] init: clear_firstboot_flag first_boot:1, clear it to 0
  1250. [ 29.860492@1] dig: data_integrity_guard isBootCompleted:1!
  1251. [ 29.865628@1] dig: dig set_data_ro_count count:0!
  1252. [ 31.153855@0] function[set_tm1628_led_value] line 228 display string: 00:00 .
  1253. [ 31.206434@0] BT_RADIO going: off
  1254. [ 31.206467@0] BCM_BT: going OFF
  1255. [ 31.234071@0] BT_RADIO going: on
  1256. [ 31.234072@0] BCM_BT: going ON
  1257. [ 31.313857@1] Changing uart_a_ttyS1: baud from 0 to 115200
  1258. [ 34.014673@0] CPU2: shutdown
  1259. [ 34.144788@0] CPU3: shutdown
  1260. [ 34.294000@0] BT_RADIO going: off
  1261. [ 34.294030@0] BCM_BT: going OFF
  1262. [ 34.835688@0] binder: 1212: binder_alloc_buf, no vma
  1263. [ 34.835733@0] binder: 451:473 transaction failed 29201, size 96-0
  1264. [ 35.044061@0] write pen_release: 2
  1265. [ 37.185254@0] CPU1: shutdown
  1266. [ 38.052503@0] BT_RADIO going: off
  1267. [ 38.052528@0] BCM_BT: going OFF
  1268. [ 38.073942@0] BT_RADIO going: on
  1269. [ 38.073968@0] BCM_BT: going ON
  1270. [ 38.854494@0] EXT4-fs (sda): unable to read superblock
  1271. [ 39.077593@0] init: untracked pid 2085 exited with status 0
  1272. [ 39.375284@0] input: Logitech Unifying Device. Wireless PID:4024 as /devices/lm0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/input/input5
  1273. [ 39.386105@0] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4024] on usb-lm0-1:1
  1274. [ 39.397152@0] input: Logitech Unifying Device. Wireless PID:4024 as /devices/lm0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/input/input6
  1275. [ 39.409394@0] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4024] on usb-lm0-1:2
  1276. [ 41.144451@0] BT_RADIO going: off
  1277. [ 41.144503@0] BCM_BT: going OFF
  1278. [ 41.545793@2] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2
  1279. [ 41.547017@2] ----aml_hw_iec958_init,runtime->rate=48000--
  1280. [ 41.552471@2] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--
  1281. [ 41.559148@2] iec958 mode PCM16
  1282. [ 41.562205@2] IEC958 16bit
  1283. [ 41.562211@2] hdmitx: audio: aout notify rate 48000
  1284. [ 41.562213@2] hdmitx: audio: aout notify size 16
  1285. [ 41.562215@2] hdmitx: audio: no update
  1286. [ 41.562219@2] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000
  1287. [ 41.562282@2] speaker_events--mute =1
  1288. [ 41.564585@2] [aml-i2s-dai]aiu i2s playback enable
  1289. [ 41.564585@2]
  1290. [ 41.564587@2] [aml-i2s-dai]audio_hw_958_enable 1
  1291. [ 41.744137@0] write pen_release: 1
  1292. [ 42.495502@0] CPU1: shutdown
  1293. [ 43.874098@0] mmcblk0: timed out sending r/w cmd command, card status 0xb00
  1294. [ 43.874101@0] mmcblk0: not retrying timeout
  1295. [ 43.874111@0] end_request: I/O error, dev mmcblk0, sector 8192
  1296. [ 43.874122@0] Buffer I/O error on device mmcblk0p1, logical block 0
  1297. [ 43.874140@0] end_request: I/O error, dev mmcblk0, sector 8200
  1298. [ 43.874147@0] Buffer I/O error on device mmcblk0p1, logical block 1
  1299. [ 43.874162@0] end_request: I/O error, dev mmcblk0, sector 8208
  1300. [ 43.874168@0] Buffer I/O error on device mmcblk0p1, logical block 2
  1301. [ 43.874175@0] end_request: I/O error, dev mmcblk0, sector 8216
  1302. [ 43.874180@0] Buffer I/O error on device mmcblk0p1, logical block 3
  1303. [ 43.873906@0] [aml_sdio_timeout] time_start_cnt:5000
  1304. [aml_sdio_print_err] sd: Timeout error, Cmd18 arg 0x2000, Xfer 16384 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=1, virqs=0x133, virqc=0x31001100, conf->cmd_clk_divide=1, pdata->clkc=1, conf->bus_width=0, pdata->width=0, conf=0x41627001, clock=35416666
  1305. [ 44.570049@0] [aml-i2s-dai]aiu i2s playback disable
  1306. [ 44.570049@0]
  1307. [ 44.570051@0] [aml-i2s-dai]audio_hw_958_enable 0
  1308. [ 44.570062@0] IEC958 16bit
  1309. [ 44.570067@0] hdmitx: audio: aout notify rate 48000
  1310. [ 44.570069@0] hdmitx: audio: aout notify size 16
  1311. [ 44.570070@0] hdmitx: audio: no update
  1312. [ 44.570073@0] aml_i2s_close device type 8
  1313. [ 44.878197@0] BT_RADIO going: off
  1314. [ 44.878235@0] BCM_BT: going OFF
  1315. [ 44.904024@0] BT_RADIO going: on
  1316. [ 44.904026@0] BCM_BT: going ON
  1317. [ 45.296347@0] CPU2: shutdown
  1318. [ 45.301577@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2
  1319. [ 45.302827@0] ----aml_hw_iec958_init,runtime->rate=48000--
  1320. [ 45.308303@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--
  1321. [ 45.317235@0] iec958 mode PCM16
  1322. [ 45.317997@0] IEC958 16bit
  1323. [ 45.320735@0] hdmitx: audio: aout notify rate 48000
  1324. [ 45.325549@0] hdmitx: audio: aout notify size 16
  1325. [ 45.330062@0] hdmitx: audio: no update
  1326. [ 45.333855@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000
  1327. [ 45.340334@0] [aml-i2s-dai]aiu i2s playback enable
  1328. [ 45.340334@0]
  1329. [ 45.346180@0] [aml-i2s-dai]audio_hw_958_enable 1
  1330. [ 45.644069@0] write pen_release: 1
  1331. [ 47.974045@1] BT_RADIO going: off
  1332. [ 47.974094@1] BCM_BT: going OFF
  1333. [ 48.351818@0] [aml-i2s-dai]aiu i2s playback disable
  1334. [ 48.351818@0]
  1335. [ 48.352749@0] [aml-i2s-dai]audio_hw_958_enable 0
  1336. [ 48.357674@0] IEC958 16bit
  1337. [ 48.360198@0] hdmitx: audio: aout notify rate 48000
  1338. [ 48.365085@0] hdmitx: audio: aout notify size 16
  1339. [ 48.369564@0] hdmitx: audio: no update
  1340. [ 48.373250@0] aml_i2s_close device type 8
  1341. [ 48.810960@1] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2
  1342. [ 48.812180@1] ----aml_hw_iec958_init,runtime->rate=48000--
  1343. [ 48.817669@1] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--
  1344. [ 48.817673@1] iec958 mode PCM16
  1345. [ 48.817678@1] IEC958 16bit
  1346. [ 48.817682@1] hdmitx: audio: aout notify rate 48000
  1347. [ 48.817684@1] hdmitx: audio: aout notify size 16
  1348. [ 48.817686@1] hdmitx: audio: no update
  1349. [ 48.817688@1] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000
  1350. [ 48.818377@1] [aml-i2s-dai]aiu i2s playback enable
  1351. [ 48.818377@1]
  1352. [ 48.818379@1] [aml-i2s-dai]audio_hw_958_enable 1
  1353.  
  1354. [ 48.883887@0] [aml_sdio_timeout] time_start_cnt:5009
  1355. [ 48.883887@0] [aml_sdio_print_err] sd: Timeout error, Cmd18 arg 0x2000, Xfer 4096 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=1, virqs=0x133, virqc=0x31003100, conf->cmd_clk_divide=1, pdata->clkc=1, conf->bus_width=0, pdata->width=0, conf=0x41627001, clock=35416666
  1356. [ 48.883906@0] [ 48.884012@0] mmcblk0: timed out sending r/w cmd command, card status 0xb00
  1357. [ 48.884014@0] mmcblk0: not retrying timeout
  1358. [ 48.884019@0] mmc_blk_reset 938 reset error md->reset_done:1 and type:1
  1359. [ 48.884024@0] end_request: I/O error, dev mmcblk0, sector 8192
  1360. [ 48.884032@0] Buffer I/O error on device mmcblk0p1, logical block 0
  1361. [ 48.988611@1] BT_RADIO going: off
  1362. [ 48.988613@1] BCM_BT: going OFF
  1363. [ 49.013936@1] BT_RADIO going: on
  1364. [ 49.013967@1] BCM_BT: going ON
  1365. [ 51.824149@0] [aml-i2s-dai]aiu i2s playback disable
  1366. [ 51.824149@0]
  1367. [ 51.825081@0] [aml-i2s-dai]audio_hw_958_enable 0
  1368. [ 51.829880@0] IEC958 16bit
  1369. [ 51.832475@0] hdmitx: audio: aout notify rate 48000
  1370. [ 51.837483@0] hdmitx: audio: aout notify size 16
  1371. [ 51.841924@0] hdmitx: audio: no update
  1372. [ 51.845730@0] aml_i2s_close device type 8
  1373. [ 52.084738@1] BT_RADIO going: off
  1374. [ 52.084969@1] BCM_BT: going OFF
  1375. [ 52.106067@0] CPU1: shutdown
  1376. [ 53.637978@0] [aml-i2s-dai]i2s dma ef300000,phy addr 2f500000,mode 0,ch 2
  1377. [ 53.639223@0] ----aml_hw_iec958_init,runtime->rate=48000--
  1378. [ 53.644778@0] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--
  1379. [ 53.651357@0] iec958 mode PCM16
  1380. [ 53.654416@0] IEC958 16bit
  1381. [ 53.657073@0] hdmitx: audio: aout notify rate 48000
  1382. [ 53.661909@0] hdmitx: audio: aout notify size 16
  1383. [ 53.671619@0] hdmitx: audio: no update
  1384. [ 53.671627@0] [aml-spdif-dai]spdif dma ef300000,phy addr 2f500000
  1385. [ 53.672417@0] [aml-i2s-dai]aiu i2s playback enable
  1386. [ 53.672417@0]
  1387. [ 53.672420@0] [aml-i2s-dai]audio_hw_958_enable 1
  1388. [ 53.894509@0] mmcblk0: timed out sending r/w cmd command, card status 0xb00
  1389. [ 53.894511@0] mmcblk0: not retrying timeout
  1390. [ 53.894515@0] mmc_blk_reset 938 reset error md->reset_done:1 and type:1
  1391. [ 53.894518@0] end_request: I/O error, dev mmcblk0, sector 8192
  1392. [ 53.894524@0] Buffer I/O error on device mmcblk0p1, logical block 0
  1393. [ 53.894535@0] end_request: I/O error, dev mmcblk0, sector 8200
  1394. [ 53.894537@0] Buffer I/O error on device mmcblk0p1, logical block 1
  1395. [ 53.894540@0] end_request: I/O error, dev mmcblk0, sector 8208
  1396. [ 53.894542@0] Buffer I/O error on device mmcblk0p1, logical block 2
  1397. [ 53.894545@0] end_request: I/O error, dev mmcblk0, sector 8216
  1398. [ 53.894547@0] Buffer I/O error on device mmcblk0p1, logical block 3
  1399. [ 53.976996@0] BT_RADIO going: off
  1400. [ 53.976997@0] BCM_BT: going OFF
  1401. [ 54.003974@0] BT_RADIO going: on
  1402. [ 54.003982@0] BCM_BT: going ON
  1403. [ 53.894381@0] [aml_sdio_timeout] time_start_cnt:5003
  1404. [aml_sdio_print_err] sd: Timeout error, Cmd18 arg 0x2000, Xfer 16384 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=1, virqs=0x133, virqc=0x31003100, conf->cmd_clk_divide=1, pdata->clkc=1, conf->bus_width=0, pdata->width=0, conf=0x41627001, clock=35416666
  1405. [ 54.064170@0] write pen_release: 1
  1406. [ 56.678116@0] [aml-i2s-dai]aiu i2s playback disable
  1407. [ 56.678116@0]
  1408. [ 56.679050@0] [aml-i2s-dai]audio_hw_958_enable 0
  1409. [ 56.683798@0] IEC958 16bit
  1410. [ 56.686619@0] hdmitx: audio: aout notify rate 48000
  1411. [ 56.691371@0] hdmitx: audio: aout notify size 16
  1412. [ 56.696154@0] hdmitx: audio: no update
  1413. [ 56.699599@0] aml_i2s_close device type 8
  1414. [ 57.075617@0] BT_RADIO going: off
  1415. [ 57.075957@0] BCM_BT: going OFF
  1416. [ 57.106094@0] CPU1: shutdown
  1417. [aml_sdio_timeout] time_start_cnt:5009
  1418. [aml_sdio_print_err] sd: Timeout error, Cmd18 arg 0x2000, Xfer 4096 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=1, virqs=0x133, virqc=0x31001100, conf->cmd_clk_divide=1, pdata->clkc=1, conf->bus_width=0, pdata->width=0, conf=0x41627001, clock=35416666
  1419. [ 58.927693@0] mmcblk0: timed out sending r/w cmd command, card status 0xb00
  1420. [ 58.934567@0] mmcblk0: not retrying timeout
  1421. [ 58.938446@0] mmc_blk_reset 938 reset error md->reset_done:1 and type:1
  1422. [ 58.946086@0] end_request: I/O error, dev mmcblk0, sector 8192
  1423. [ 58.950764@0] Buffer I/O error on device mmcblk0p1, logical block 0
  1424. [
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!