SHARE
TWEET

httpd.conf + httpd-vhots.conf

a guest Nov 20th, 2011 147 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. # ========================================================== httpd.conf
  2. #
  3. # This is the main Apache HTTP server configuration file.  It contains the
  4. # configuration directives that give the server its instructions.
  5. # See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
  6. # In particular, see
  7. # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
  8. # for a discussion of each configuration directive.
  9. #
  10. # Do NOT simply read the instructions in here without understanding
  11. # what they do.  They're here only as hints or reminders.  If you are unsure
  12. # consult the online docs. You have been warned.  
  13. #
  14. # Configuration and logfile names: If the filenames you specify for many
  15. # of the server's control files begin with "/" (or "drive:/" for Win32), the
  16. # server will use that explicit path.  If the filenames do *not* begin
  17. # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
  18. # with ServerRoot set to "/xampp/apache" will be interpreted by the
  19. # server as "/xampp/apache/logs/foo.log".
  20. #
  21. # NOTE: Where filenames are specified, you must use forward slashes
  22. # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
  23. # If a drive letter is omitted, the drive on which httpd.exe is located
  24. # will be used by default.  It is recommended that you always supply
  25. # an explicit drive letter in absolute paths to avoid confusion.
  26.  
  27. #
  28. # ServerRoot: The top of the directory tree under which the server's
  29. # configuration, error, and log files are kept.
  30. #
  31. # Do not add a slash at the end of the directory path.  If you point
  32. # ServerRoot at a non-local disk, be sure to point the LockFile directive
  33. # at a local disk.  If you wish to share the same ServerRoot for multiple
  34. # httpd daemons, you will need to change at least LockFile and PidFile.
  35. #
  36. ServerRoot "/xampp/apache"
  37.  
  38. #
  39. # Listen: Allows you to bind Apache to specific IP addresses and/or
  40. # ports, instead of the default. See also the <VirtualHost>
  41. # directive.
  42. #
  43. # Change this to Listen on specific IP addresses as shown below to
  44. # prevent Apache from glomming onto all bound IP addresses.
  45. #
  46. #Listen 0.0.0.0:80
  47. #Listen [::]:80
  48. Listen 192.168.2.95:80
  49.  
  50. #
  51. # Dynamic Shared Object (DSO) Support
  52. #
  53. # To be able to use the functionality of a module which was built as a DSO you
  54. # have to place corresponding `LoadModule' lines at this location so the
  55. # directives contained in it are actually available _before_ they are used.
  56. # Statically compiled modules (those listed by `httpd -l') do not need
  57. # to be loaded here.
  58. #
  59. # Example:
  60. # LoadModule foo_module modules/mod_foo.so
  61. #
  62. LoadModule actions_module modules/mod_actions.so
  63. LoadModule alias_module modules/mod_alias.so
  64. LoadModule asis_module modules/mod_asis.so
  65. LoadModule auth_basic_module modules/mod_auth_basic.so
  66. LoadModule auth_digest_module modules/mod_auth_digest.so
  67. #LoadModule authn_alias_module modules/mod_authn_alias.so
  68. #LoadModule authn_anon_module modules/mod_authn_anon.so
  69. #LoadModule authn_dbd_module modules/mod_authn_dbd.so
  70. #LoadModule authn_dbm_module modules/mod_authn_dbm.so
  71. LoadModule authn_default_module modules/mod_authn_default.so
  72. LoadModule authn_file_module modules/mod_authn_file.so
  73. #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
  74. #LoadModule authz_dbm_module modules/mod_authz_dbm.so
  75. LoadModule authz_default_module modules/mod_authz_default.so
  76. LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
  77. LoadModule authz_host_module modules/mod_authz_host.so
  78. #LoadModule authz_owner_module modules/mod_authz_owner.so
  79. LoadModule authz_user_module modules/mod_authz_user.so
  80. LoadModule autoindex_module modules/mod_autoindex.so
  81. #LoadModule bucketeer_module modules/mod_bucketeer.so
  82. #LoadModule cache_module modules/mod_cache.so
  83. #LoadModule case_filter_module modules/mod_case_filter.so
  84. #LoadModule case_filter_in_module modules/mod_case_filter_in.so
  85. #LoadModule cern_meta_module modules/mod_cern_meta.so
  86. #LoadModule cgi_module modules/mod_cgi.so
  87. #LoadModule charset_lite_module modules/mod_charset_lite.so
  88. #LoadModule dav_module modules/mod_dav.so
  89. #LoadModule dav_fs_module modules/mod_dav_fs.so
  90. LoadModule dav_lock_module modules/mod_dav_lock.so
  91. #LoadModule dbd_module modules/mod_dbd.so
  92. #LoadModule deflate_module modules/mod_deflate.so
  93. LoadModule dir_module modules/mod_dir.so
  94. #LoadModule disk_cache_module modules/mod_disk_cache.so
  95. #LoadModule dumpio_module modules/mod_dumpio.so
  96. #LoadModule echo_module modules/mod_echo.so
  97. LoadModule env_module modules/mod_env.so
  98. #LoadModule example_module modules/mod_example.so
  99. #LoadModule expires_module modules/mod_expires.so
  100. #LoadModule ext_filter_module modules/mod_ext_filter.so
  101. #LoadModule file_cache_module modules/mod_file_cache.so
  102. #LoadModule filter_module modules/mod_filter.so
  103. LoadModule headers_module modules/mod_headers.so
  104. #LoadModule ident_module modules/mod_ident.so
  105. #LoadModule imagemap_module modules/mod_imagemap.so
  106. LoadModule include_module modules/mod_include.so
  107. LoadModule info_module modules/mod_info.so
  108. #LoadModule isapi_module modules/mod_isapi.so
  109. #LoadModule ldap_module modules/mod_ldap.so
  110. #LoadModule logio_module modules/mod_logio.so
  111. LoadModule log_config_module modules/mod_log_config.so
  112. #LoadModule log_forensic_module modules/mod_log_forensic.so
  113. #LoadModule mem_cache_module modules/mod_mem_cache.so
  114. LoadModule mime_module modules/mod_mime.so
  115. #LoadModule mime_magic_module modules/mod_mime_magic.so
  116. LoadModule negotiation_module modules/mod_negotiation.so
  117. LoadModule proxy_module modules/mod_proxy.so
  118. LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
  119. #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
  120. #LoadModule proxy_connect_module modules/mod_proxy_connect.so
  121. #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
  122. #LoadModule proxy_http_module modules/mod_proxy_http.so
  123. LoadModule rewrite_module modules/mod_rewrite.so
  124. LoadModule setenvif_module modules/mod_setenvif.so
  125. #LoadModule speling_module modules/mod_speling.so
  126. #LoadModule ssl_module modules/mod_ssl.so
  127. LoadModule status_module modules/mod_status.so
  128. #LoadModule substitute_module modules/mod_substitute.so
  129. #LoadModule unique_id_module modules/mod_unique_id.so
  130. #LoadModule userdir_module modules/mod_userdir.so
  131. #LoadModule usertrack_module modules/mod_usertrack.so
  132. #LoadModule version_module modules/mod_version.so
  133. LoadModule vhost_alias_module modules/mod_vhost_alias.so
  134.  
  135. <IfModule !mpm_netware_module>
  136. <IfModule !mpm_winnt_module>
  137. #
  138. # If you wish httpd to run as a different user or group, you must run
  139. # httpd as root initially and it will switch.  
  140. #
  141. # User/Group: The name (or #number) of the user/group to run httpd as.
  142. # It is usually good practice to create a dedicated user and group for
  143. # running httpd, as with most system services.
  144. #
  145. User daemon
  146. Group daemon
  147.  
  148. </IfModule>
  149. </IfModule>
  150.  
  151. # 'Main' server configuration
  152. #
  153. # The directives in this section set up the values used by the 'main'
  154. # server, which responds to any requests that aren't handled by a
  155. # <VirtualHost> definition.  These values also provide defaults for
  156. # any <VirtualHost> containers you may define later in the file.
  157. #
  158. # All of these directives may appear inside <VirtualHost> containers,
  159. # in which case these default settings will be overridden for the
  160. # virtual host being defined.
  161. #
  162.  
  163. #
  164. # ServerAdmin: Your address, where problems with the server should be
  165. # e-mailed.  This address appears on some server-generated pages, such
  166. # as error documents.  e.g. admin@your-domain.com
  167. #
  168. ServerAdmin postmaster@localhost
  169.  
  170. #
  171. # ServerName gives the name and port that the server uses to identify itself.
  172. # This can often be determined automatically, but we recommend you specify
  173. # it explicitly to prevent problems during startup.
  174. #
  175. # If your host doesn't have a registered DNS name, enter its IP address here.
  176. #
  177. ServerName localhost:80
  178.  
  179. #
  180. # DocumentRoot: The directory out of which you will serve your
  181. # documents. By default, all requests are taken from this directory, but
  182. # symbolic links and aliases may be used to point to other locations.
  183. #
  184. DocumentRoot "/xampp/htdocs"
  185.  
  186. #
  187. # Each directory to which Apache has access can be configured with respect
  188. # to which services and features are allowed and/or disabled in that
  189. # directory (and its subdirectories).
  190. #
  191. # First, we configure the "default" to be a very restrictive set of
  192. # features.  
  193. #
  194. <Directory />
  195.     Options FollowSymLinks
  196.     AllowOverride None
  197.     Order deny,allow
  198.     Deny from all
  199. </Directory>
  200.  
  201. #
  202. # Note that from this point forward you must specifically allow
  203. # particular features to be enabled - so if something's not working as
  204. # you might expect, make sure that you have specifically enabled it
  205. # below.
  206. #
  207.  
  208. #
  209. # This should be changed to whatever you set DocumentRoot to.
  210. #
  211. <Directory "/xampp/htdocs">
  212.     #
  213.     # Possible values for the Options directive are "None", "All",
  214.     # or any combination of:
  215.     #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
  216.     #
  217.     # Note that "MultiViews" must be named *explicitly* --- "Options All"
  218.     # doesn't give it to you.
  219.     #
  220.     # The Options directive is both complicated and important.  Please see
  221.     # http://httpd.apache.org/docs/2.2/mod/core.html#options
  222.     # for more information.
  223.     #
  224.     Options Indexes FollowSymLinks Includes ExecCGI
  225.  
  226.     #
  227.     # AllowOverride controls what directives may be placed in .htaccess files.
  228.     # It can be "All", "None", or any combination of the keywords:
  229.     #   Options FileInfo AuthConfig Limit
  230.     #
  231.     AllowOverride All
  232.  
  233.     #
  234.     # Controls who can get stuff from this server.
  235.     #
  236.     Order allow,deny
  237.     Allow from all
  238.  
  239. </Directory>
  240.  
  241. #
  242. # DirectoryIndex: sets the file that Apache will serve if a directory
  243. # is requested.
  244. #
  245. <IfModule dir_module>
  246.     DirectoryIndex index.php index.pl index.cgi index.asp index.shtml index.html index.htm \
  247.                    default.php default.pl default.cgi default.asp default.shtml default.html default.htm \
  248.                    home.php home.pl home.cgi home.asp home.shtml home.html home.htm
  249. </IfModule>
  250.  
  251. #
  252. # The following lines prevent .htaccess and .htpasswd files from being
  253. # viewed by Web clients.
  254. #
  255. <FilesMatch "^\.ht">
  256.     Order allow,deny
  257.     Deny from all
  258.     Satisfy All
  259. </FilesMatch>
  260.  
  261. #
  262. # ErrorLog: The location of the error log file.
  263. # If you do not specify an ErrorLog directive within a <VirtualHost>
  264. # container, error messages relating to that virtual host will be
  265. # logged here.  If you *do* define an error logfile for a <VirtualHost>
  266. # container, that host's errors will be logged there and not here.
  267. #
  268. ErrorLog "logs/error.log"
  269.  
  270. #ScriptLog "logs/cgi.log"
  271.  
  272. #
  273. # LogLevel: Control the number of messages logged to the error_log.
  274. # Possible values include: debug, info, notice, warn, error, crit,
  275. # alert, emerg.
  276. #
  277. LogLevel warn
  278.  
  279. <IfModule log_config_module>
  280.     #
  281.     # The following directives define some format nicknames for use with
  282.     # a CustomLog directive (see below).
  283.     #
  284.     LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
  285.     LogFormat "%h %l %u %t \"%r\" %>s %b" common
  286.  
  287.     <IfModule logio_module>
  288.       # You need to enable mod_logio.c to use %I and %O
  289.       LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
  290.     </IfModule>
  291.  
  292.     #
  293.     # The location and format of the access logfile (Common Logfile Format).
  294.     # If you do not define any access logfiles within a <VirtualHost>
  295.     # container, they will be logged here.  Contrariwise, if you *do*
  296.     # define per-<VirtualHost> access logfiles, transactions will be
  297.     # logged therein and *not* in this file.
  298.     #
  299.     #CustomLog "logs/access.log" common
  300.  
  301.     #
  302.     # If you prefer a logfile with access, agent, and referer information
  303.     # (Combined Logfile Format) you can use the following directive.
  304.     #
  305.     CustomLog "logs/access.log" combined
  306. </IfModule>
  307.  
  308. <IfModule alias_module>
  309.     #
  310.     # Redirect: Allows you to tell clients about documents that used to
  311.     # exist in your server's namespace, but do not anymore. The client
  312.     # will make a new request for the document at its new location.
  313.     # Example:
  314.     # Redirect permanent /foo http://localhost/bar
  315.  
  316.     #
  317.     # Alias: Maps web paths into filesystem paths and is used to
  318.     # access content that does not live under the DocumentRoot.
  319.     # Example:
  320.     # Alias /webpath /full/filesystem/path
  321.     #
  322.     # If you include a trailing / on /webpath then the server will
  323.     # require it to be present in the URL.  You will also likely
  324.     # need to provide a <Directory> section to allow access to
  325.     # the filesystem path.
  326.  
  327.     #
  328.     # ScriptAlias: This controls which directories contain server scripts.
  329.     # ScriptAliases are essentially the same as Aliases, except that
  330.     # documents in the target directory are treated as applications and
  331.     # run by the server when requested rather than as documents sent to the
  332.     # client.  The same rules about trailing "/" apply to ScriptAlias
  333.     # directives as to Alias.
  334.     #
  335.     ScriptAlias /cgi-bin/ "/xampp/cgi-bin/"
  336. </IfModule>
  337.  
  338. <IfModule cgid_module>
  339.     #
  340.     # ScriptSock: On threaded servers, designate the path to the UNIX
  341.     # socket used to communicate with the CGI daemon of mod_cgid.
  342.     #
  343.     #Scriptsock "logs/cgi.sock"
  344. </IfModule>
  345.  
  346. #
  347. # "/xampp/cgi-bin" should be changed to whatever your ScriptAliased
  348. # CGI directory exists, if you have that configured.
  349. #
  350. <Directory "/xampp/cgi-bin">
  351.     AllowOverride None
  352.     Options None
  353.     Order allow,deny
  354.     Allow from all
  355. </Directory>
  356.  
  357. #
  358. # DefaultType: the default MIME type the server will use for a document
  359. # if it cannot otherwise determine one, such as from filename extensions.
  360. # If your server contains mostly text or HTML documents, "text/plain" is
  361. # a good value.  If most of your content is binary, such as applications
  362. # or images, you may want to use "application/octet-stream" instead to
  363. # keep browsers from trying to display binary files as though they are
  364. # text.
  365. #
  366. DefaultType text/plain
  367.  
  368. <IfModule mime_module>
  369.     #
  370.     # TypesConfig points to the file containing the list of mappings from
  371.     # filename extension to MIME-type.
  372.     #
  373.     TypesConfig "conf/mime.types"
  374.  
  375.     #
  376.     # AddType allows you to add to or override the MIME configuration
  377.     # file specified in TypesConfig for specific file types.
  378.     #
  379.     #AddType application/x-gzip .tgz
  380.     #
  381.     # AddEncoding allows you to have certain browsers uncompress
  382.     # information on the fly. Note: Not all browsers support this.
  383.     #
  384.     #AddEncoding x-compress .Z
  385.     #AddEncoding x-gzip .gz .tgz
  386.     #
  387.     # If the AddEncoding directives above are commented-out, then you
  388.     # probably should define those extensions to indicate media types:
  389.     #
  390.     AddType application/x-compress .Z
  391.     AddType application/x-gzip .gz .tgz
  392.  
  393.     #
  394.     # AddHandler allows you to map certain file extensions to "handlers":
  395.     # actions unrelated to filetype. These can be either built into the server
  396.     # or added with the Action directive (see below)
  397.     #
  398.     # To use CGI scripts outside of ScriptAliased directories:
  399.     # (You will also need to add "ExecCGI" to the "Options" directive.)
  400.     #
  401.     AddHandler cgi-script .cgi .pl .asp
  402.  
  403.     # For type maps (negotiated resources):
  404.     #AddHandler type-map var
  405.  
  406.     #
  407.     # Filters allow you to process content before it is sent to the client.
  408.     #
  409.     # To parse .shtml files for server-side includes (SSI):
  410.     # (You will also need to add "Includes" to the "Options" directive.)
  411.     #
  412.     AddType text/html .shtml
  413.     AddOutputFilter INCLUDES .shtml
  414. </IfModule>
  415.  
  416. <IfModule mime_magic_module>
  417.     #
  418.     # The mod_mime_magic module allows the server to use various hints from the
  419.     # contents of the file itself to determine its type.  The MIMEMagicFile
  420.     # directive tells the module where the hint definitions are located.
  421.     #
  422.     MIMEMagicFile "conf/magic"
  423. </IfModule>
  424.  
  425. #
  426. # Customizable error responses come in three flavors:
  427. # 1) plain text 2) local redirects 3) external redirects
  428. #
  429. # Some examples:
  430. #ErrorDocument 500 "The server made a boo boo."
  431. #ErrorDocument 404 /missing.html
  432. #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
  433. #ErrorDocument 402 http://localhost/subscription_info.html
  434. #
  435.  
  436. #
  437. # EnableMMAP and EnableSendfile: On systems that support it,
  438. # memory-mapping or the sendfile syscall is used to deliver
  439. # files.  This usually improves server performance, but must
  440. # be turned off when serving from networked-mounted
  441. # filesystems or if support for these functions is otherwise
  442. # broken on your system.
  443. #
  444. #EnableMMAP off
  445. #EnableSendfile off
  446.  
  447. # Supplemental configuration
  448. #
  449. # The configuration files in the conf/extra/ directory can be
  450. # included to add extra features or to modify the default configuration of
  451. # the server, or you may simply copy their contents here and change as
  452. # necessary.
  453.  
  454. # XAMPP specific settings
  455. Include "conf/extra/httpd-xampp.conf"
  456.  
  457. # Perl settings
  458. #Include "conf/extra/httpd-perl.conf"
  459.  
  460. # Server-pool management (MPM specific)
  461. #Include "conf/extra/httpd-mpm.conf"
  462.  
  463. # Multi-language error messages
  464. Include "conf/extra/httpd-multilang-errordoc.conf"
  465.  
  466. # Fancy directory listings
  467. Include "conf/extra/httpd-autoindex.conf"
  468.  
  469. # Language settings
  470. Include "conf/extra/httpd-languages.conf"
  471.  
  472. # User home directories
  473. Include "conf/extra/httpd-userdir.conf"
  474.  
  475. # Real-time info on requests and configuration
  476. Include "conf/extra/httpd-info.conf"
  477.  
  478. # Virtual hosts
  479. Include "conf/extra/httpd-vhosts.conf"
  480.  
  481. # Distributed authoring and versioning (WebDAV)
  482. # Attention! WEB_DAV is a security risk without a new userspecific configuration for a secure authentifcation
  483. # Include "conf/extra/httpd-dav.conf"
  484.  
  485. # Implements a proxy/gateway for Apache.
  486. #Include "conf/extra/httpd-proxy.conf"
  487.  
  488. # Various default settings
  489. Include "conf/extra/httpd-default.conf"
  490.  
  491. # Secure (SSL/TLS) connections
  492. Include "conf/extra/httpd-ssl.conf"
  493. #
  494. # Note: The following must must be present to support
  495. #       starting without SSL on platforms with no /dev/random equivalent
  496. #       but a statically compiled-in mod_ssl.
  497. #
  498. #<IfModule ssl_module>
  499. #    SSLRandomSeed startup builtin
  500. #    SSLRandomSeed connect builtin
  501. #    SSLSessionCache "shmcb:logs/ssl.scache(512000)"
  502. #    SSLSessionCacheTimeout 300
  503. #</IfModule>
  504.  
  505. # AJP13 Proxy
  506. #<IfModule mod_proxy.c>
  507. #<IfModule mod_proxy_ajp.c>
  508. #Include "conf/extra/httpd-ajp.conf"
  509. #</IfModule>
  510. #</IfModule>
  511.  
  512.  
  513. # ========================================================== httpd-vhosts.conf
  514.  
  515. #
  516. # Virtual Hosts
  517. #
  518. # If you want to maintain multiple domains/hostnames on your
  519. # machine you can setup VirtualHost containers for them. Most configurations
  520. # use only name-based virtual hosts so the server doesn't need to worry about
  521. # IP addresses. This is indicated by the asterisks in the directives below.
  522. #
  523. # Please see the documentation at
  524. # <URL:http://httpd.apache.org/docs/2.2/vhosts/>
  525. # for further details before you try to setup virtual hosts.
  526. #
  527. # You may use the command line option '-S' to verify your virtual host
  528. # configuration.
  529.  
  530. #
  531. # Use name-based virtual hosting.
  532. #
  533. NameVirtualHost 192.168.2.96:80
  534.  
  535. #
  536. # VirtualHost example:
  537. # Almost any Apache directive may go into a VirtualHost container.
  538. # The first VirtualHost section is used for all requests that do not
  539. # match a ServerName or ServerAlias in any <VirtualHost> block.
  540. #
  541. ##<VirtualHost *:80>
  542.     ##ServerAdmin postmaster@dummy-host.localhost
  543.     ##DocumentRoot "/xampp/htdocs/dummy-host.localhost"
  544.     ##ServerName dummy-host.localhost
  545.     ##ServerAlias www.dummy-host.localhost
  546.     ##ErrorLog "logs/dummy-host.localhost-error.log"
  547.     ##CustomLog "logs/dummy-host.localhost-access.log" combined
  548. ##</VirtualHost>
  549.  
  550. ##<VirtualHost *:80>
  551.     ##ServerAdmin postmaster@dummy-host2.localhost
  552.     ##DocumentRoot "/xampp/htdocs/dummy-host2.localhost"
  553.     ##ServerName dummy-host2.localhost
  554.     ##ServerAlias www.dummy-host2.localhost
  555.     ##ErrorLog "logs/dummy-host2.localhost-error.log"
  556.     ##CustomLog "logs/dummy-host2.localhost-access.log" combined
  557. ##</VirtualHost>
  558.  
  559. <VirtualHost 192.168.2.96:80>
  560.         DocumentRoot "/xampp/hegedocs/www"
  561.         ServerName 192.168.2.96
  562. </VirtualHost>
  563.  
  564. <Directory "/xampp/hegedocs/www">
  565.     #
  566.     # Possible values for the Options directive are "None", "All",
  567.     # or any combination of:
  568.     #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
  569.     #
  570.     # Note that "MultiViews" must be named *explicitly* --- "Options All"
  571.     # doesn't give it to you.
  572.     #
  573.     # The Options directive is both complicated and important.  Please see
  574.     # http://httpd.apache.org/docs/2.2/mod/core.html#options
  575.     # for more information.
  576.     #
  577.     Options Indexes FollowSymLinks Includes ExecCGI
  578.  
  579.     #
  580.     # AllowOverride controls what directives may be placed in .htaccess files.
  581.     # It can be "All", "None", or any combination of the keywords:
  582.     #   Options FileInfo AuthConfig Limit
  583.     #
  584.     AllowOverride All
  585.  
  586.     #
  587.     # Controls who can get stuff from this server.
  588.     #
  589.     Order allow,deny
  590.     Allow from all
  591.  
  592. </Directory>
  593.  
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top