Guest User

Untitled

a guest
Nov 18th, 2016
109
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. 100 Hz
  2.  
  3. barebox 2011.05.0-mini2440-ptx-2012.02.0 (Jun 18 2012 - 13:30:27)
  4. Board: Mini 2440
  5. NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit)
  6. Bad block table not found for chip 0
  7. Bad block table not found for chip 0
  8. Scanning device for bad blocks
  9. Bad eraseblock 70 at 0x008c0000
  10. Bad block table written to 0x07fe0000, version 0x01
  11. Bad block table written to 0x07fc0000, version 0x01
  12. dm9000 i/o: 0x20000300, id: 0x90000a46
  13. eth@eth0: got MAC address from EEPROM: FF:FF:FF:FF:FF:FF
  14. refclk: 12000 kHz
  15. mpll: 405000 kHz
  16. upll: 48000 kHz
  17. fclk: 405000 kHz
  18. hclk: 101250 kHz
  19. pclk: 50625 kHz
  20. SDRAM1: CL2@101MHz
  21. Malloc space: 0x33a00000 -> 0x33e00000 (size 4 MB)
  22. Stack space : 0x339f8000 -> 0x33a00000 (size 32 kB)
  23. running /env/bin/init...
  24. sh: No such file or directory
  25.  
  26. Hit any key to stop autoboot: 1
  27. sh: No such file or directory
  28. warning: No MAC address set. Using random address 82:FA:11:2B:92:A8
  29. phy0: Link is up - 10/Half
  30. T TFTP from server 192.168.1.110 ('zImage-mini2440' -> '/dev/ram0.kernel')
  31. #################################################################
  32. #################################################################
  33. #################################################################
  34. #################################################################
  35. #################################################################
  36. #################################################################
  37. #######################
  38. booting kernel of type zimage from /dev/ram0.kernel
  39. loaded zImage from /dev/ram0.kernel with size 2118688
  40. commandline: console=ttySAC0,115200 mini2440=3tbc ip=192.168.1.210:192.168.1.110:192.168.1.1:255.255.255)
  41. arch_number: 1999
  42. Booting Linux on physical CPU 0x0
  43. Linux version 4.9.0-rc2+ (s.nawrocki@AMDC3061) (gcc version 4.9.2 (OSELAS.Toolchain-2014.12.0) ) #1957 P6
  44. CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c000717f
  45. CPU: VIVT data cache, VIVT instruction cache
  46. Machine: MINI2440
  47. Memory policy: Data cache writeback
  48. CPU S3C2440A (id 0x32440001)
  49. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  50. Kernel command line: console=ttySAC0,115200 mini2440=3tbc ip=192.168.1.210:192.168.1.110:192.168.1.1:255)
  51. PID hash table entries: 256 (order: -2, 1024 bytes)
  52. Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  53. Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  54. Memory: 60380K/65536K available (3470K kernel code, 165K rwdata, 580K rodata, 152K init, 145K bss, 5156K)
  55. Virtual kernel memory layout:
  56. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  57. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  58. vmalloc : 0xc4800000 - 0xff800000 ( 944 MB)
  59. lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
  60. modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  61. .text : 0xc0008000 - 0xc036bb10 (3471 kB)
  62. .init : 0xc03fe000 - 0xc0424000 ( 152 kB)
  63. .data : 0xc0424000 - 0xc044d4e0 ( 166 kB)
  64. .bss : 0xc044d4e0 - 0xc0471c10 ( 146 kB)
  65. SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  66. Preemptible hierarchical RCU implementation.
  67. Build-time adjustment of leaf fanout to 32.
  68. NR_IRQS:103
  69. S3C2440: IRQ Support
  70. irq: clearing pending status 00000080
  71. irq: clearing pending status 00000002
  72. samsung_pwm_clocksource_init:417
  73. _samsung_pwm_clocksource_init:390
  74. samsung_clocksource_init:341
  75. samsung_clocksource_init:351 pclk: 50625000, timer clock_rate: 1012500
  76. sched_clock: 16 bits at 1012kHz, resolution 987ns, wraps every 32362962ns
  77. clocksource: samsung_clocksource_timer: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 28803037 ns
  78. Calibrating delay loop... 202.13 BogoMIPS (lpj=1010688)
  79. pid_max: default: 32768 minimum: 301
  80. Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  81. Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  82. CPU: Testing write buffer coherency: ok
  83. Setting up static identity map for 0x30008160 - 0x3000819c
  84. devtmpfs: initialized
  85. clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  86. NET: Registered protocol family 16
  87. DMA: preallocated 256 KiB pool for atomic coherent allocations
  88. cpuidle: using governor ladder
  89. cpuidle: using governor menu
  90. MINI2440: Option string mini2440=3tbc
  91. MINI2440: 't' ignored, touchscreen not compiled in
  92. MINI2440: LCD
  93. 0:240x320
  94. 1:800x480
  95. 2:1024x768
  96. [3:320x240]
  97.  
  98. S3C2440: Initialising architecture
  99. SCSI subsystem initialized
  100. usbcore: registered new interface driver usbfs
  101. usbcore: registered new interface driver hub
  102. usbcore: registered new device driver usb
  103. s3c-i2c s3c2440-i2c.0: slave address 0x10
  104. s3c-i2c s3c2440-i2c.0: bus frequency set to 98 KHz
  105. s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
  106. s3c24xx_cpufreq: S3C24XX CPU Frequency driver, s3c244x cpu support
  107. Advanced Linux Sound Architecture Driver Initialized.
  108. clocksource: Switched to clocksource samsung_clocksource_timer
  109. NET: Registered protocol family 2
  110. TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  111. TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  112. TCP: Hash tables configured (established 1024 bind 1024)
  113. UDP hash table entries: 256 (order: 0, 4096 bytes)
  114. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  115. NET: Registered protocol family 1
  116. RPC: Registered named UNIX socket transport module.
  117. RPC: Registered udp transport module.
  118. RPC: Registered tcp transport module.
  119. RPC: Registered tcp NFSv4.1 backchannel transport module.
  120. futex hash table entries: 256 (order: -1, 3072 bytes)
  121. workingset: timestamp_bits=30 max_order=14 bucket_order=0
  122. jffs2: version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
  123. io scheduler noop registered
  124. io scheduler cfq registered (default)
  125. s3c2410-lcd s3c2410-lcd: fb0: s3c2410fb frame buffer device
  126. s3c24xx-dma s3c2410-dma.0: initialized 4 virtual memcpy channels
  127. s3c24xx-dma s3c2410-dma.0: initialized 27 virtual slave channels
  128. s3c24xx-dma s3c2410-dma.0: Loaded dma driver with 4 physical channels
  129. s3c2440-uart.0: ttySAC0 at MMIO 0x50000000 (irq = 74, base_baud = 0) is a S3C2440
  130. console [ttySAC0] enabled
  131. s3c2440-uart.1: ttySAC1 at MMIO 0x50004000 (irq = 77, base_baud = 0) is a S3C2440
  132. s3c2440-uart.2: ttySAC2 at MMIO 0x50008000 (irq = 80, base_baud = 0) is a S3C2440
  133. at24 0-0050: 1024 byte 24c08 EEPROM, writable, 16 bytes/write
  134. s3c24xx-nand s3c2440-nand: Tacls=1, 9ns Twrph0=3 29ns, Twrph1=2 19ns
  135. s3c24xx-nand s3c2440-nand: NAND hardware ECC
  136. nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
  137. nand: Samsung NAND 128MiB 3,3V 8-bit
  138. nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  139. 4 cmdlinepart partitions found on MTD device nand
  140. Creating 4 MTD partitions on "nand":
  141. 0x000000000000-0x000000080000 : "barebox"
  142. 0x000000080000-0x0000000e0000 : "bareboxenv"
  143. 0x0000000e0000-0x0000002e0000 : "kernel"
  144. 0x0000002e0000-0x000008000000 : "root"
  145. s3c24xx-nand s3c2440-nand: clock idle support enabled
  146. eth0: dm9000e at c48bd300,c48bf304 IRQ 55 MAC: 82:fa:11:2b:92:a8 (chip)
  147. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  148. ohci-s3c2410: OHCI S3C2410 driver
  149. s3c2410-ohci s3c2410-ohci: OHCI Host Controller
  150. s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
  151. s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
  152. hub 1-0:1.0: USB hub found
  153. hub 1-0:1.0: 2 ports detected
  154. usbcore: registered new interface driver usb-storage
  155. s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq disabled
  156. s3c-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
  157. s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz).
  158. s3c-sdi s3c2440-sdi: mmc0 - using pio, hw SDIO IRQ
  159. UDA134X SoC Audio Codec
  160. s3c24xx-iis s3c24xx-iis: Failed to get DMA channel capabilities, falling back to period counting: -6
  161. s3c24xx-iis s3c24xx-iis: Failed to get DMA channel capabilities, falling back to period counting: -6
  162. s3c24xx_uda134x s3c24xx_uda134x.0: uda134x-hifi <-> s3c24xx-iis mapping ok
  163. NET: Registered protocol family 17
  164. input: gpio-keys as /devices/platform/gpio-keys/input/input0
  165. hctosys: unable to open rtc device (rtc0)
  166. dm9000 dm9000 eth0: link up, 10Mbps, half-duplex, lpa 0x0021
  167. IP-Config: Complete:
  168. device=eth0, hwaddr=82:fa:11:2b:92:a8, ipaddr=192.168.1.210, mask=255.255.255.0, gw=192.168.1.1
  169. host=192.168.1.210, domain=, nis-domain=(none)
  170. bootserver=192.168.1.110, rootserver=192.168.1.110, rootpath=
  171. ALSA device list:
  172. #0: S3C24XX_UDA134X
  173. usb 1-1: new full-speed USB device number 2 using s3c2410-ohci
  174. s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz).
  175. s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz).
  176. s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz).
  177. s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz).
  178. random: fast init done
  179. hub 1-1:1.0: USB hub found
  180. hub 1-1:1.0: 4 ports detected
  181. s3c-sdi s3c2440-sdi: running at 16875kHz (requested: 25000kHz).
  182. s3c-sdi s3c2440-sdi: running at 16875kHz (requested: 25000kHz).
  183. mmc0: new SDHC card at address aaaa
  184. mmcblk0: mmc0:aaaa SL16G 14.8 GiB
  185. mmcblk0: p1 p2
  186. jffs2: Empty flash at 0x004f2e6c ends at 0x004f3000
  187. jffs2: Empty flash at 0x004f5624 ends at 0x004f5800
  188. jffs2: Empty flash at 0x0234efa0 ends at 0x0234f000
  189. jffs2: Empty flash at 0x02353ed4 ends at 0x02354000
  190. jffs2: Empty flash at 0x023556d4 ends at 0x02355800
  191. jffs2: Empty flash at 0x02357a70 ends at 0x02358000
  192. jffs2: Empty flash at 0x02358ed4 ends at 0x02359000
  193.  
  194. jffs2: jffs2_scan_inode_node(): CRC failed on node at 0x04e34fe4: Read 0xffffffff, calculated 0x75a2f56b
  195. jffs2: Empty flash at 0x04e356f8 ends at 0x04e35800
  196. jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x07ce0010: 0xcfff instead
  197. jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x07d00010: 0xcfff instead
  198. VFS: Mounted root (jffs2 filesystem) on device 31:3.
  199. devtmpfs: mounted
  200. Freeing unused kernel memory: 152K (c03fe000 - c0424000)
  201. This architecture does not have kernel memory protection.
  202. init started: BusyBox v1.22.1 (2016-08-01 13:05:00 CEST)
  203. starting pid 429, tty '/dev/console': '/etc/init.d/rcS'
  204. mounting filesystems...done.
  205. running rc.d services...
  206. starting udev
  207. creating static nodes
  208. starting udevd...done
  209. udevd[443]: starting version 182
  210. waiting for devices...done
  211. Starting telnetd...
  212. restoring mixer state...done
  213. starting network interfaces...
  214. RTNETLINK answers: File exists
  215. loading modules
  216. starting pid 484, tty '/dev/console': '/sbin/getty -L 115200 ttySAC0 vt100'
  217.  
  218. ____ _______ __
  219. | _ `_ _` `/ /
  220. | |_) || | ` /
  221. | __/ | | / `
  222. |_| |_| /_/`_`
  223.  
  224. _ _ ____ _ _ _ _ ___
  225. _ __ ___ (_)_ __ (_)___ `| || | | || | / _ `
  226. | '_ ` _ `| | '_ `| | __) | || |_| || |_| | | |
  227. | | | | | | | | | | |/ __/|__ _|__ _| |_| |
  228. |_| |_| |_|_|_| |_|_|_____| |_| |_| `___/
  229.  
  230.  
  231. OSELAS(R)-Mini2440-2015.01.0-dirty / mini2440-2015.01.0-dirty
  232. ptxdist-2015.01.0/2016-08-01T13:06:06+0200
  233.  
  234. mini2440 login: root
  235. login[484]: root login on 'ttySAC0'
  236. root@mini2440:~
  237. root@mini2440:~
  238. root@mini2440:~ cat /proc/timer_list
  239. Timer List Version: v0.8
  240. HRTIMER_MAX_CLOCK_BASES: 4
  241. now at 26659093326 nsecs
  242.  
  243. cpu: 0
  244. clock 0:
  245. .base: c04367e0
  246. .index: 0
  247. .resolution: 1 nsecs
  248. .get_time: <c005d0c0>
  249. .offset: 0 nsecs
  250. active timers:
  251. #0: <c0436d40>, <c0066434>, S:01
  252. # expires at 26660000000-26660000000 nsecs [in 906674 to 906674 nsecs]
  253. #1: <c04631a8>, <c0065d98>, S:01
  254. # expires at 26667080688-26667080688 nsecs [in 7987362 to 7987362 nsecs]
  255. clock 1:
  256. .base: c0436800
  257. .index: 1
  258. .resolution: 1 nsecs
  259. .get_time: <c005729c>
  260. .offset: 0 nsecs
  261. active timers:
  262. clock 2:
  263. .base: c0436820
  264. .index: 2
  265. .resolution: 1 nsecs
  266. .get_time: <c00572bc>
  267. .offset: 0 nsecs
  268. active timers:
  269. clock 3:
  270. .base: c0436840
  271. .index: 3
  272. .resolution: 1 nsecs
  273. .get_time: <c00572dc>
  274. .offset: 0 nsecs
  275. active timers:
  276. .expires_next : 26660000000 nsecs
  277. .hres_active : 1
  278. .nr_events : 3171
  279. .nr_retries : 9
  280. .nr_hangs : 0
  281. .max_hang_time : 0
  282. .nohz_mode : 2
  283. .last_tick : 20980000000 nsecs
  284. .tick_stopped : 0
  285. .idle_jiffies : 4294939396
  286. .idle_calls : 434
  287. .idle_sleeps : 336
  288. .idle_entrytime : 21030012833 nsecs
  289. .idle_waketime : 21030012833 nsecs
  290. .idle_exittime : 21030110611 nsecs
  291. .idle_sleeptime : 4592600488 nsecs
  292. .iowait_sleeptime: 0 nsecs
  293. .last_jiffies : 4294939398
  294. .next_timer : 21030000000
  295. .idle_expires : 21030000000 nsecs
  296. jiffies: 4294939961
  297.  
  298. Tick Device: mode: 1
  299. Per CPU device: 0
  300. Clock Event Device: samsung_event_timer
  301. max_delta_ns: 64725932
  302. min_delta_ns: 1000
  303. mult: 4348654
  304. shift: 32
  305. mode: 3
  306. next_event: 26660000000 nsecs
  307. set_next_event: <c02779a0>
  308. shutdown: <c02777b4>
  309. periodic: <c02779dc>
  310. oneshot: <c02777b4>
  311. resume: <c02777b4>
  312. event_handler: <c0058044>
  313. retries: 0
  314.  
  315. root@mini2440:~ random: crng init done
  316.  
  317. root@mini2440:~
RAW Paste Data