[dani@tool backfire-nikwrt]$ screen /dev/ttyUSB0 9600





Bootbase Version: V1.05 | 10/17/2005 11:08:11
RAM: Size = 16384 Kbytes
DRAM POST: Testing: 16384K
OK
FLASH: AMD 16M *1

ZyNOS Version: V3.40(AHF.0)b12 | 7/30/2007  9:59:42

Press any key to enter debug mode within 3 seconds.
.............
Enter Debug Mode
ATSE
0039C9EC0544
OK
ATEN 1,410F2282
ERROR
ATEN 1,C10F343B
OK
ATBA 5
Now, console speed will be changed to 115200 bps

OK










[screen is terminating]
[dani@tool backfire-nikwrt]$ screen /dev/ttyUSB0 115200







at
OK
ATBT1
OK
ATUP94040000,1c0000
Starting XMODEM upload (CRC mode)....
CCSending allin1.bin, 13824 blocks: Give your local XMODEM receive command now.
Xmodem sectors/kbytes sent:   0/ 0kRetry 0: NAK on sector
Bytes Sent:1769600   BPS:11302

Transfer complete

Total 1769600 bytes received

OK
ATER0,33
<0><1><2><3><4><5><6><7><8><9><10><11><12><13><14><15><16><17><18><19><20><21><22><23><24><25><26><27><28><29><30><31><32><33>
OK
ATWF94040000,b0000000,1c0000
................................................................................................................................................................................................................................................................................................................................................................................................................................................................
OK

Basic POST completed...     Success.
Last reset cause: Hardware reset (Power-on reset)

PSPBoot1.4 rev: 1.4.0.5
(c) Copyright 2002-2005 Texas Instruments, Inc. All Rights Reserved.

Press ESC for monitor... 1

(psbl)

Booting...
Linux version 2.6.32.68 (dani@tool) (gcc version 4.3.3 (GCC) ) #51 Sat Dec 10 17:52:13 CET 2016
ar7-gpio: registered 32 GPIOs
bootconsole [early0] enabled
CPU revision is: 00018448 (MIPS 4KEc)
TI AR7 (TNETD7200), ID: 0x002b, Revision: 0x11
Determined physical RAM map:
 memory: 01000000 @ 14000000 (usable)
Zone PFN ranges:
  Normal   0x00014000 -> 0x00015000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00014000 -> 0x00015000
Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 4064
Kernel command line: rootfstype=squashfs,jffs2 console=ttyS0,115200n8
PID hash table entries: 64 (order: -4, 256 bytes)
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Primary instruction cache 16kB, VIPT, 4-way, linesize 16 bytes.
Primary data cache 8kB, 4-way, VIPT, no aliases, linesize 16 bytes
Memory: 12628k/16384k available (2040k kernel code, 3756k reserved, 322k data, 124k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:256
Clocks: Sync 1:1 mode
Clocks: Setting DSP clock
(Clocks: Setting USB clockrequency = 125000000, prediv = 1, postdiv = 2, postdiv2 = 1, mul = 10
Adjusted requested frequency 48000000 to 48076920
Clocks: base = 125000000, frequency = 48000000, prediv = 13, postdiv = 1, postdiv2 = -1, mul = 5
Calibrating delay loop... 124.51 BogoMIPS (lpj=622592)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
msgmni has been set to 24
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x8610e00 (irq = 15) is a TI-AR7
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
physmap platform flash device: 00800000 at 10000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
 CFI mfr 0x000000c2
 CFI id  0x00002249
 Amd/Fujitsu Extended Query Table at 0x0040
  Amd/Fujitsu Extended Query version 1.0.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
RedBoot partition parsing not available
5 ar7part partitions found on MTD device physmap-flash.0
Creating 5 MTD partitions on "physmap-flash.0":
0x000000000000-0x000000010000 : "loader"
0x000000010000-0x000000020000 : "config"
0x000000020000-0x000000200000 : "linux"
0x0000000e0000-0x000000200000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=1A0000, len=60000
0x0000001a0000-0x000000200000 : "rootfs_data"
0x000000000000-0x000000200000 : "all"
cpmac-mii: probed
eth%d: ADM6996M model PHY found.
cpmac: device eth0 (regs: 08610000, irq: 27, phy: 1:00, mac: 00:0d:88:cb:b2:b0)
ar7_wdt: timer margin 34 seconds (prescale 65535, change 65535, freq 125000000)
Registered led device: adsl-link
Registered led device: wifi
Registered led device: status
TCP westwood registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Freeing unused kernel memory: 124k freed
Please be patient, while OpenWrt loads ...
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
jffs2 not ready yet; using ramdisk
mini_fo: using base directory: /
mini_fo: using storage directory: /tmp/root
- init -

Please press Enter to activate this console. /sbin/hotplug-call: /etc/hotplug.d/iface/10-routes: line 1: logger: not found
device eth0 entered promiscuous mode
br-lan: port 1(eth0) entering forwarding state
PHY: 1:00 - Link is Up - 100/Full
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (199 buckets, 796 max)
Loading defaults
Loading synflood protection
Adding custom chains
Loading zones
Loading forwardings
Loading redirects
Loading rules
Loading includes
Optimizing conntrack
Loading interfaces
/etc/rc.common: eval: line 1: logger: not found
/etc/rc.common: eval: line 1: logger: not found
/etc/rc.common: eval: line 1: logger: not found
/etc/rc.common: eval: line 1: logger: not found
jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
jffs2_build_filesystem(): unlocking the mtd device... done.
jffs2_build_filesystem(): erasing all blocks after the end marker... done.
copying files ... done
mini_fo: using base directory: /
mini_fo: using storage directory: /overlay
ar7_wdt: timer margin 34 seconds (prescale 65535, change 65535, freq 125000000)

starting pid 281, tty '/dev/ttyS0': '/bin/ash --login'


BusyBox v1.15.3 (2016-12-08 21:44:14 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 ---------------------------------------------------
 Backfire (10.03.x Snapshot, r33081)
 ---------------------------------------------------
  * 1/3 shot Kahlua    In a shot glass, layer Kahlua
  * 1/3 shot Bailey's  on the bottom, then Bailey's,
  * 1/3 shot Vodka     then Vodka.
 ---------------------------------------------------
root@OpenWrt:/#