Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- DDR Version 1.20 20190314
- In
- channel 0
- CS = 0
- MR0=0x19
- MR4=0x3
- MR5=0x6
- MR8=0x0
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0xFF
- channel 1
- CS = 0
- MR0=0x19
- MR4=0x3
- MR5=0x6
- MR8=0x0
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0xFF
- channel 0 training pass!
- channel 1 training pass!
- change freq to 400MHz 0,1
- channel 0
- CS = 0
- MR0=0x19
- MR4=0x3
- MR5=0x6
- MR8=0x0
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0xFF
- channel 1
- CS = 0
- MR0=0x19
- MR4=0x3
- MR5=0x6
- MR8=0x0
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0xFF
- channel 0 training pass!
- channel 1 training pass!
- change freq to 800MHz 1,0
- Channel 0: LPDDR4,800MHz
- Bus Width=32 Col=10 Bank=8 Row=14 CS=1 Die Bus-Width=16 Size=512MB
- Channel 1: LPDDR4,800MHz
- Bus Width=32 Col=10 Bank=8 Row=14 CS=1 Die Bus-Width=16 Size=512MB
- 256B stride
- ch 0 ddrconfig = 0x101, ddrsize = 0x10
- ch 1 ddrconfig = 0x101, ddrsize = 0x10
- pmugrf_os_reg[2] = 0x3241F241, stride = 0x5
- OUT
- Boot1: 2019-03-14, version: 1.19
- CPUId = 0x0
- ChipType = 0x10, 250
- mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
- mmc: ERROR: Card did not respond to voltage select!
- emmc reinit
- mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
- mmc: ERROR: Card did not respond to voltage select!
- emmc reinit
- mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
- mmc: ERROR: Card did not respond to voltage select!
- SdmmcInit=2 1
- mmc0:cmd5,20
- SdmmcInit=0 0
- BootCapSize=0
- UserCapSize=29664MB
- FwPartOffset=2000 , 0
- StorageInit ok = 44580
- SecureMode = 0
- SecureInit read PBA: 0x4
- SecureInit read PBA: 0x404
- SecureInit read PBA: 0x804
- SecureInit read PBA: 0xc04
- SecureInit read PBA: 0x1004
- SecureInit read PBA: 0x1404
- SecureInit read PBA: 0x1804
- SecureInit read PBA: 0x1c04
- SecureInit ret = 0, SecureMode = 0
- atags_set_bootdev: ret:(0)
- GPT 0x3380ec0 signature is wrong
- recovery gpt...
- GPT 0x3380ec0 signature is wrong
- recovery gpt fail!
- LoadTrust Addr:0x4000
- No find bl30.bin
- No find bl32.bin
- Load uboot, ReadLba = 2000
- hdr 0000000003380880 + 0x0:0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
- Load OK, addr=0x200000, size=0xa5eb0
- RunBL31 0x40000
- NOTICE: BL31: v1.3(debug):42583b6
- NOTICE: BL31: Built : 07:55:13, Oct 15 2019
- NOTICE: BL31: Rockchip release version: v1.1
- INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
- INFO: Using opteed sec cpu_context!
- INFO: boot cpu mask: 0
- INFO: If lpddr4 need support multi frequency,
- INFO: please update loader!
- INFO: Current ctl index[0] freq=400MHz
- INFO: Current ctl index[1] freq=800MHz
- INFO: plat_rockchip_pmu_init(1190): pd status 3e
- INFO: BL31: Initializing runtime services
- WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
- ERROR: Error initializing runtime service opteed_fast
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0x200000
- INFO: SPSR = 0x3c9
- U-Boot 2020.04-armbian (Jun 06 2020 - 18:18:00 +0200)
- SoC: Rockchip rk3399
- Reset cause: POR
- Model: Radxa ROCK Pi 4
- DRAM: 1022 MiB
- PMIC: RK808
- MMC: dwmmc@fe320000: 1, sdhci@fe330000: 0
- Loading Environment from MMC... Card did not respond to voltage select!
- *** Warning - No block device, using default environment
- In: serial@ff1a0000
- Out: serial@ff1a0000
- Err: serial@ff1a0000
- Model: Radxa ROCK Pi 4
- Net: eth0: ethernet@fe300000
- Hit any key to stop autoboot: 0
- switch to partitions #0, OK
- mmc1 is current device
- Scanning mmc 1:1...
- Found U-Boot script /boot/boot.scr
- 2940 bytes read in 7 ms (410.2 KiB/s)
- ## Executing script at 00500000
- Boot script loaded from mmc 1
- 102 bytes read in 6 ms (16.6 KiB/s)
- 11134591 bytes read in 484 ms (21.9 MiB/s)
- 19601920 bytes read in 844 ms (22.1 MiB/s)
- 73510 bytes read in 16 ms (4.4 MiB/s)
- 2698 bytes read in 12 ms (218.8 KiB/s)
- Applying kernel provided DT fixup script (rockchip-fixup.scr)
- ## Executing script at 39000000
- ## Loading init Ramdisk from Legacy Image at 06000000 ...
- Image Name: uInitrd
- Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
- Data Size: 11134527 Bytes = 10.6 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 01f00000
- Booting using the fdt blob at 0x1f00000
- Loading Ramdisk to 3d484000, end 3df2263f ... OK
- Loading Device Tree to 000000003d409000, end 000000003d483fff ... OK
- Starting kernel ...
Add Comment
Please, Sign In to add comment