Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- NOTICE: BL2: v1.5(release):LSDK-19.06-1-g58107f1a
- NOTICE: BL2: Built : 14:43:54, Sep 12 2019
- NOTICE: UDIMM VL41A2G63A-N8SC-S1
- NOTICE: DDR4 UDIMM with 2-rank 64-bit bus (x8)
- NOTICE: 32 GB DDR4, 64-bit, CL=19, ECC on, 256B, CS0+CS1
- NOTICE: BL2: Booting BL31
- NOTICE: BL31: v1.5(release):LSDK-19.06-1-g58107f1a
- NOTICE: BL31: Built : 14:43:54, Sep 12 2019
- NOTICE: Welcome to LX2160 BL31 Phase
- U-Boot 2019.04-00006-g50e49ed320-dirty (Sep 12 2019 - 14:43:52 +0300)
- SoC: LX2160ACE Rev1.0 (0x87360010)
- Clock Configuration:
- CPU0(A72):2000 MHz CPU1(A72):2000 MHz CPU2(A72):2000 MHz
- CPU3(A72):2000 MHz CPU4(A72):2000 MHz CPU5(A72):2000 MHz
- CPU6(A72):2000 MHz CPU7(A72):2000 MHz CPU8(A72):2000 MHz
- CPU9(A72):2000 MHz CPU10(A72):2000 MHz CPU11(A72):2000 MHz
- CPU12(A72):2000 MHz CPU13(A72):2000 MHz CPU14(A72):2000 MHz
- CPU15(A72):2000 MHz
- Bus: 700 MHz DDR: 2600 MT/s
- Reset Configuration Word (RCW):
- 00000000: 506b6b38 24500050 00000000 00000000
- 00000010: 00000000 0e010000 00000000 00000000
- 00000020: 024001a0 00002580 00000000 00000086
- 00000030: 09240000 00000001 00000000 00000000
- 00000040: 00000000 00000000 00000000 00000000
- 00000050: 00000000 00000000 00000000 00000000
- 00000060: 00000000 00000000 00027000 00000000
- 00000070: 08a80001 001d1020
- Model: SolidRun LX2160ACEX7 COM express type 7 based board
- Board: LX2160ACE Rev1.0-CEX7, SD
- SERDES1 Reference: Clock1 = 161.13MHz Clock2 = 100MHz
- SERDES2 Reference: Clock1 = 100MHz Clock2 = 100MHz
- SERDES3 Reference: Clock1 = 100MHz Clock2 = 100Hz
- I2C: ready
- DRAM: 31.9 GiB
- DDR 31.9 GiB (DDR4, 64-bit, CL=19, ECC on)
- DDR Controller Interleaving Mode: 256B
- DDR Chip-Select Interleaving Mode: CS0+CS1
- Using SERDES1 Protocol: 8 (0x8)
- Using SERDES2 Protocol: 5 (0x5)
- Using SERDES3 Protocol: 2 (0x2)
- MMC: FSL_SDHC: 0, FSL_SDHC: 1
- Loading Environment from MMC... *** Warning - bad CRC, using default environment
- In: serial_pl01x
- Out: serial_pl01x
- Err: serial_pl01x
- Net: PCIe0: pcie@3400000 disabled
- PCIe1: pcie@3500000 disabled
- PCIe2: pcie@3600000 Root Complex: no link
- PCIe3: pcie@3700000 disabled
- PCIe4: pcie@3800000 Root Complex: x8 gen3
- PCIe5: pcie@3900000 disabled
- DPMAC3@xgmii
- Warning: DPMAC3@xgmii (eth0) using random MAC address - 2a:40:ed:34:c2:08
- , DPMAC4@xgmii
- Warning: DPMAC4@xgmii (eth1) using random MAC address - 22:48:c4:4e:4e:04
- , DPMAC5@xgmii
- Warning: DPMAC5@xgmii (eth2) using random MAC address - 7a:b5:91:52:f5:95
- , DPMAC6@xgmii
- Warning: DPMAC6@xgmii (eth3) using random MAC address - 72:bd:b8:28:79:99
- , DPMAC7@xgmii
- Warning: DPMAC7@xgmii (eth4) using random MAC address - 4a:e6:45:88:90:91
- , DPMAC8@xgmii
- Warning: DPMAC8@xgmii (eth5) using random MAC address - 42:ee:6c:f2:1c:9d
- , DPMAC9@xgmii
- Warning: DPMAC9@xgmii (eth6) using random MAC address - de:5f:61:27:41:c8
- , DPMAC10@xgmii
- Warning: DPMAC10@xgmii (eth7) using random MAC address - d6:57:48:5d:cd:c4
- , DPMAC17@rgmii-id [PRIME]
- Warning: DPMAC17@rgmii-id (eth8) using random MAC address - 8e:0f:f2:b4:ef:3f
- MMC read: dev # 0, block # 20480, count 4608 ... 4608 blocks read: OK
- MMC read: dev # 0, block # 28672, count 2048 ... 2048 blocks read: OK
- crc32+
- fsl-mc: Booting Management Complex ... SUCCESS
- fsl-mc: Management Complex booted (version: 10.16.2, boot status: 0x1)
- Hit any key to stop autoboot: 0
- Device: FSL_SDHC
- Manufacturer ID: 3
- OEM: 5344
- Name: SL08G
- Bus Speed: 50000000
- Mode : SD High Speed (50MHz)
- Rd Block Len: 512
- SD version 3.0
- High Capacity: Yes
- Capacity: 7.4 GiB
- Bus Width: 4-bit
- Erase Group Size: 512 Bytes
- MMC read: dev # 0, block # 26624, count 2048 ... 2048 blocks read: OK
- starting USB...
- USB0: Register 200017f NbrPorts 2
- Starting the controller
- USB XHCI 1.00
- USB1: Register 200017f NbrPorts 2
- Starting the controller
- USB XHCI 1.00
- scanning bus 0 for devices... 1 USB Device(s) found
- scanning bus 1 for devices... cannot reset port 1!?
- 5 USB Device(s) found
- scanning usb for storage devices... 1 Storage Device(s) found
- Device 0: Vendor: SanDisk Rev: 1.00 Prod: Cruzer Glide 3.0
- Type: Removable Hard Disk
- Capacity: 14875.0 MB = 14.5 GB (30464000 x 512)
- ... is now current device
- Scanning usb 0:1...
- switch to partitions #0, OK
- mmc0 is current device
- ** No partition table - mmc 0 **
- scanning bus for devices...
- SATA link 0 timeout.
- AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
- flags: 64bit ncq pm clo only pmp fbss pio slum part ccc apst
- SATA link 0 timeout.
- AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
- flags: 64bit ncq pm clo only pmp fbss pio slum part ccc apst
- SATA link 0 timeout.
- AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
- flags: 64bit ncq pm clo only pmp fbss pio slum part ccc apst
- SATA link 0 timeout.
- AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
- flags: 64bit ncq pm clo only pmp fbss pio slum part ccc apst
- Device 0: unknown device
- Trying load from sd card..
- Device: FSL_SDHC
- Manufacturer ID: 3
- OEM: 5344
- Name: SL08G
- Bus Speed: 50000000
- Mode : SD High Speed (50MHz)
- Rd Block Len: 512
- SD version 3.0
- High Capacity: Yes
- Capacity: 7.4 GiB
- Bus Width: 4-bit
- Erase Group Size: 512 Bytes
- MMC read: dev # 0, block # 32768, count 118784 ... 118784 blocks read: OK
- ## Loading kernel from FIT Image at a0000000 ...
- Using 'lx2160acex7' configuration
- Trying 'kernel' kernel subimage
- Description: ARM64 Kernel
- Type: Kernel Image
- Compression: gzip compressed
- Data Start: 0xa00000d0
- Data Size: 10843792 Bytes = 10.3 MiB
- Architecture: AArch64
- OS: Linux
- Load Address: 0x80080000
- Entry Point: 0x80080000
- Hash algo: crc32
- Hash value: 14a35119
- Verifying Hash Integrity ... crc32+ OK
- ## Loading ramdisk from FIT Image at a0000000 ...
- Using 'lx2160acex7' configuration
- Trying 'initrd' ramdisk subimage
- Description: initrd for arm64
- Type: RAMDisk Image
- Compression: uncompressed
- Data Start: 0xa0a57840
- Data Size: 11535243 Bytes = 11 MiB
- Architecture: AArch64
- OS: Linux
- Load Address: 0x00000000
- Entry Point: 0x00000000
- Hash algo: crc32
- Hash value: c150f71f
- Verifying Hash Integrity ... crc32+ OK
- ## Loading fdt from FIT Image at a0000000 ...
- Using 'lx2160acex7' configuration
- Trying 'lx2160acex7-dtb' fdt subimage
- Description: lx2160acex7-dtb
- Type: Flat Device Tree
- Compression: uncompressed
- Data Start: 0xa1557cb0
- Data Size: 24091 Bytes = 23.5 KiB
- Architecture: AArch64
- Load Address: 0x90000000
- Hash algo: crc32
- Hash value: f82492bd
- Verifying Hash Integrity ... crc32+ OK
- Loading fdt from 0xa1557cb0 to 0x90000000
- Booting using the fdt blob at 0x90000000
- Uncompressing Kernel Image ... OK
- Loading Device Tree to 000000009fff7000, end 000000009ffffe1a ... OK
- fsl-mc: Deploying data path layout ... WARNING: Firmware returned an error (GSR: 0x3f)
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
- [ 0.000000] Linux version 4.19.46-00003-g1107c2ef8370-dirty (rabeeh@tr2) (gcc version 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4] (Linaro GCC 7.4-2019.02)) #16 SMP PREEMPT Thu Sep 12 13:02:59 IDT 2019
- [ 0.000000] Machine model: SolidRun LX2160A COM express type 7 module
- [ 0.000000] earlycon: pl11 at MMIO32 0x00000000021c0000 (options '')
- [ 0.000000] bootconsole [pl11] enabled
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] cma: Reserved 32 MiB at 0x00000000f9c00000
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000277fffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0x277ffd4f80-0x277ffd673f]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000ffffffff]
- [ 0.000000] Normal [mem 0x0000000100000000-0x000000277fffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fbdfffff]
- [ 0.000000] node 0: [mem 0x0000002080000000-0x000000277fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000277fffffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.1
- [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x414 with crng_init=0
- [ 0.000000] percpu: Embedded 25 pages/cpu s63448 r8192 d30760 u102400
- [ 0.000000] Detected PIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for EL2 vector hardening
- [ 0.000000] Speculative Store Bypass Disable mitigation not required
- [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 7724544
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf
- [ 0.000000] software IO TLB: mapped [mem 0xf5c00000-0xf9c00000] (64MB)
- [ 0.000000] Memory: 28663624K/31389696K available (14908K kernel code, 1706K rwdata, 6148K rodata, 1536K init, 931K bss, 2693304K reserved, 32768K cma-reserved)
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=16.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: no VLPI support, no direct LPI support
- [ 0.000000] ITS [mem 0x06020000-0x0603ffff]
- [ 0.000000] ITS@0x0000000006020000: allocated 65536 Devices @2761880000 (flat, esz 8, psz 64K, shr 0)
- [ 0.000000] ITS: using cache flushing for cmd queue
- [ 0.000000] GIC: using LPI property table @0x0000002761860000
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000006200000
- [ 0.000000] CPU0: using LPI pending table @0x0000002761870000
- [ 0.000000] GIC: using cache flushing for LPI property table
- [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c409fb33, max_idle_ns: 440795203156 ns
- [ 0.000002] sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 4398046511103ns
- [ 0.008285] Console: colour dummy device 80x25
- [ 0.012809] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
- [ 0.023276] pid_max: default: 32768 minimum: 301
- [ 0.028016] Security Framework initialized
- [ 0.038709] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
- [ 0.049470] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
- [ 0.056987] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.064034] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.095465] ASID allocator initialised with 32768 entries
- [ 0.108933] rcu: Hierarchical SRCU implementation.
- [ 0.121809] Platform MSI: gic-its@6020000 domain created
- [ 0.127217] PCI/MSI: /interrupt-controller@6000000/gic-its@6020000 domain created
- [ 0.134800] fsl-mc MSI: /interrupt-controller@6000000/gic-its@6020000 domain created
- [ 0.142923] EFI services will not be available.
- [ 0.155508] smp: Bringing up secondary CPUs ...
- [ 0.192216] Detected PIPT I-cache on CPU1
- [ 0.192236] GICv3: CPU1: found redistributor 1 region 0:0x0000000006220000
- [ 0.192271] CPU1: using LPI pending table @0x000000275e750000
- [ 0.192292] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
- [ 0.224229] Detected PIPT I-cache on CPU2
- [ 0.224246] GICv3: CPU2: found redistributor 100 region 0:0x0000000006240000
- [ 0.224282] CPU2: using LPI pending table @0x000000275e7b0000
- [ 0.224301] CPU2: Booted secondary processor 0x0000000100 [0x410fd083]
- [ 0.256252] Detected PIPT I-cache on CPU3
- [ 0.256263] GICv3: CPU3: found redistributor 101 region 0:0x0000000006260000
- [ 0.256296] CPU3: using LPI pending table @0x000000275e7c0000
- [ 0.256311] CPU3: Booted secondary processor 0x0000000101 [0x410fd083]
- [ 0.288282] Detected PIPT I-cache on CPU4
- [ 0.288298] GICv3: CPU4: found redistributor 200 region 0:0x0000000006280000
- [ 0.288333] CPU4: using LPI pending table @0x000000275e7e0000
- [ 0.288352] CPU4: Booted secondary processor 0x0000000200 [0x410fd083]
- [ 0.320323] Detected PIPT I-cache on CPU5
- [ 0.320336] GICv3: CPU5: found redistributor 201 region 0:0x00000000062a0000
- [ 0.320369] CPU5: using LPI pending table @0x000000275e030000
- [ 0.320385] CPU5: Booted secondary processor 0x0000000201 [0x410fd083]
- [ 0.352339] Detected PIPT I-cache on CPU6
- [ 0.352355] GICv3: CPU6: found redistributor 300 region 0:0x00000000062c0000
- [ 0.352389] CPU6: using LPI pending table @0x000000275e050000
- [ 0.352409] CPU6: Booted secondary processor 0x0000000300 [0x410fd083]
- [ 0.384363] Detected PIPT I-cache on CPU7
- [ 0.384377] GICv3: CPU7: found redistributor 301 region 0:0x00000000062e0000
- [ 0.384409] CPU7: using LPI pending table @0x000000275e0b0000
- [ 0.384426] CPU7: Booted secondary processor 0x0000000301 [0x410fd083]
- [ 0.416395] Detected PIPT I-cache on CPU8
- [ 0.416413] GICv3: CPU8: found redistributor 400 region 0:0x0000000006300000
- [ 0.416447] CPU8: using LPI pending table @0x000000275e0c0000
- [ 0.416467] CPU8: Booted secondary processor 0x0000000400 [0x410fd083]
- [ 0.448420] Detected PIPT I-cache on CPU9
- [ 0.448436] GICv3: CPU9: found redistributor 401 region 0:0x0000000006320000
- [ 0.448469] CPU9: using LPI pending table @0x000000275e0e0000
- [ 0.448485] CPU9: Booted secondary processor 0x0000000401 [0x410fd083]
- [ 0.480451] Detected PIPT I-cache on CPU10
- [ 0.480472] GICv3: CPU10: found redistributor 500 region 0:0x0000000006340000
- [ 0.480506] CPU10: using LPI pending table @0x000000275e140000
- [ 0.480525] CPU10: Booted secondary processor 0x0000000500 [0x410fd083]
- [ 0.512476] Detected PIPT I-cache on CPU11
- [ 0.512493] GICv3: CPU11: found redistributor 501 region 0:0x0000000006360000
- [ 0.512526] CPU11: using LPI pending table @0x000000275e150000
- [ 0.512541] CPU11: Booted secondary processor 0x0000000501 [0x410fd083]
- [ 0.544508] Detected PIPT I-cache on CPU12
- [ 0.544531] GICv3: CPU12: found redistributor 600 region 0:0x0000000006380000
- [ 0.544564] CPU12: using LPI pending table @0x000000275e170000
- [ 0.544584] CPU12: Booted secondary processor 0x0000000600 [0x410fd083]
- [ 0.576532] Detected PIPT I-cache on CPU13
- [ 0.576551] GICv3: CPU13: found redistributor 601 region 0:0x00000000063a0000
- [ 0.576584] CPU13: using LPI pending table @0x000000275e1c0000
- [ 0.576600] CPU13: Booted secondary processor 0x0000000601 [0x410fd083]
- [ 0.608563] Detected PIPT I-cache on CPU14
- [ 0.608587] GICv3: CPU14: found redistributor 700 region 0:0x00000000063c0000
- [ 0.608620] CPU14: using LPI pending table @0x000000275e1e0000
- [ 0.608640] CPU14: Booted secondary processor 0x0000000700 [0x410fd083]
- [ 0.640586] Detected PIPT I-cache on CPU15
- [ 0.640606] GICv3: CPU15: found redistributor 701 region 0:0x00000000063e0000
- [ 0.640640] CPU15: using LPI pending table @0x000000275e1f0000
- [ 0.640656] CPU15: Booted secondary processor 0x0000000701 [0x410fd083]
- [ 0.640696] smp: Brought up 1 node, 16 CPUs
- [ 1.000368] SMP: Total of 16 processors activated.
- [ 1.005210] CPU features: detected: GIC system register CPU interface
- [ 1.011725] CPU features: detected: 32-bit EL0 Support
- [ 1.023577] CPU: All CPU(s) started at EL2
- [ 1.027739] alternatives: patching kernel code
- [ 1.032905] devtmpfs: initialized
- [ 1.037945] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 1.047831] futex hash table entries: 4096 (order: 6, 262144 bytes)
- [ 1.054538] xor: measuring software checksum speed
- [ 1.099404] 8regs : 8478.000 MB/sec
- [ 1.143645] 8regs_prefetch: 7429.000 MB/sec
- [ 1.188239] 32regs : 8535.000 MB/sec
- [ 1.232479] 32regs_prefetch: 8047.000 MB/sec
- [ 1.237143] xor: using function: 32regs (8535.000 MB/sec)
- [ 1.242601] pinctrl core: initialized pinctrl subsystem
- [ 1.248275] DMI not present or invalid.
- [ 1.252328] NET: Registered protocol family 16
- [ 1.257064] audit: initializing netlink subsys (disabled)
- [ 1.262576] audit: type=2000 audit(1.076:1): state=initialized audit_enabled=0 res=1
- [ 1.270412] cpuidle: using governor menu
- [ 1.274543] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
- [ 1.282022] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 1.289368] DMA: preallocated 256 KiB pool for atomic allocations
- [ 1.295867] Serial: AMBA PL011 UART driver
- [ 1.300772] Machine: SolidRun LX2160A COM express type 7 module
- [ 1.306757] SoC family: QorIQ LX2160A
- [ 1.310451] SoC ID: svr:0x87360010, Revision: 1.0
- [ 1.315890] 21c0000.serial: ttyAMA0 at MMIO 0x21c0000 (irq = 17, base_baud = 0) is a SBSA
- [ 1.324164] console [ttyAMA0] enabled
- [ 1.324164] console [ttyAMA0] enabled
- [ 1.331511] bootconsole [pl11] disabled
- [ 1.331511] bootconsole [pl11] disabled
- [ 1.339429] 21d0000.serial: ttyAMA1 at MMIO 0x21d0000 (irq = 18, base_baud = 0) is a SBSA
- [ 1.350525] fsl_mc_bus 80c000000.fsl-mc: MC firmware version: 10.16.2
- [ 1.359544] fsl_mc_dprc dprc.1: DMA mask not set
- [ 1.375223] HugeTLB registered 1.00 GiB page size, pre-allocated 2 pages
- [ 1.382208] cryptd: max_cpu_qlen set to 1000
- [ 1.454682] raid6: int64x1 gen() 1233 MB/s
- [ 1.526686] raid6: int64x1 xor() 1111 MB/s
- [ 1.598718] raid6: int64x2 gen() 1684 MB/s
- [ 1.670750] raid6: int64x2 xor() 1655 MB/s
- [ 1.742798] raid6: int64x4 gen() 2591 MB/s
- [ 1.814827] raid6: int64x4 xor() 1821 MB/s
- [ 1.886863] raid6: int64x8 gen() 2294 MB/s
- [ 1.958888] raid6: int64x8 xor() 1792 MB/s
- [ 2.030943] raid6: neonx1 gen() 2499 MB/s
- [ 2.103248] raid6: neonx1 xor() 2806 MB/s
- [ 2.175549] raid6: neonx2 gen() 3274 MB/s
- [ 2.247850] raid6: neonx2 xor() 3505 MB/s
- [ 2.320155] raid6: neonx4 gen() 4272 MB/s
- [ 2.392450] raid6: neonx4 xor() 3811 MB/s
- [ 2.464751] raid6: neonx8 gen() 4845 MB/s
- [ 2.537050] raid6: neonx8 xor() 4128 MB/s
- [ 2.541309] raid6: using algorithm neonx8 gen() 4845 MB/s
- [ 2.546697] raid6: .... xor() 4128 MB/s, rmw enabled
- [ 2.551652] raid6: using neon recovery algorithm
- [ 2.556408] ACPI: Interpreter disabled.
- [ 2.560691] vgaarb: loaded
- [ 2.563505] SCSI subsystem initialized
- [ 2.567433] usbcore: registered new interface driver usbfs
- [ 2.572926] usbcore: registered new interface driver hub
- [ 2.578275] usbcore: registered new device driver usb
- [ 2.583581] i2c i2c-0: IMX I2C adapter registered
- [ 2.588345] imx-i2c 2020000.i2c: scl-gpios not found
- [ 2.593338] i2c i2c-1: IMX I2C adapter registered
- [ 2.598159] i2c i2c-2: IMX I2C adapter registered
- [ 2.603021] pps_core: LinuxPPS API ver. 1 registered
- [ 2.607978] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 2.617112] PTP clock support registered
- [ 2.621068] EDAC MC: Ver: 3.0.0
- [ 2.624411] No BMan portals available!
- [ 2.628350] QMan: Allocated lookup table at (____ptrval____), entry count 65537
- [ 2.635702] No QMan portals available!
- [ 2.639506] No USDPAA memory, no 'fsl,usdpaa-mem' in device-tree
- [ 2.645705] Advanced Linux Sound Architecture Driver Initialized.
- [ 2.652125] clocksource: Switched to clocksource arch_sys_counter
- [ 2.658296] VFS: Disk quotas dquot_6.6.0
- [ 2.662239] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 2.669162] pnp: PnP ACPI: disabled
- [ 2.675369] NET: Registered protocol family 2
- [ 2.680004] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes)
- [ 2.688287] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 2.696531] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 2.703625] TCP: Hash tables configured (established 262144 bind 65536)
- [ 2.710346] UDP hash table entries: 16384 (order: 7, 524288 bytes)
- [ 2.716853] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
- [ 2.723841] NET: Registered protocol family 1
- [ 2.728417] RPC: Registered named UNIX socket transport module.
- [ 2.734333] RPC: Registered udp transport module.
- [ 2.739029] RPC: Registered tcp transport module.
- [ 2.743725] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 2.750218] Trying to unpack rootfs image as initramfs...
- [ 2.755754] rootfs image is not initramfs (no cpio magic); looks like an initrd
- [ 2.772363] Freeing initrd memory: 11260K
- [ 2.777066] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
- [ 2.785354] kvm [1]: 8-bit VMID
- [ 2.788760] kvm [1]: vgic-v2@c0e0000
- [ 2.792342] kvm [1]: GIC system register CPU interface enabled
- [ 2.798336] kvm [1]: vgic interrupt IRQ1
- [ 2.802417] kvm [1]: Hyp mode initialized successfully
- [ 2.809370] workingset: timestamp_bits=44 max_order=23 bucket_order=0
- [ 2.816215] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 2.822163] NFS: Registering the id_resolver key type
- [ 2.827215] Key type id_resolver registered
- [ 2.831389] Key type id_legacy registered
- [ 2.835392] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 2.842131] fuse init (API version 7.27)
- [ 2.846126] 9p: Installing v9fs 9p2000 file system support
- [ 2.853075] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
- [ 2.860530] io scheduler noop registered
- [ 2.864447] io scheduler deadline registered
- [ 2.868725] io scheduler cfq registered (default)
- [ 2.873422] io scheduler mq-deadline registered
- [ 2.877946] io scheduler kyber registered
- [ 2.884581] layerscape-pcie-gen4 3600000.pcie: host bridge /soc/pcie@3600000 ranges:
- [ 2.892326] layerscape-pcie-gen4 3600000.pcie: MEM 0x9040000000..0x907fffffff -> 0x40000000
- [ 3.901009] layerscape-pcie-gen4 3600000.pcie: link never came up
- [ 3.907112] layerscape-pcie-gen4 3600000.pcie: link bring-up failed
- [ 3.913420] layerscape-pcie-gen4 3600000.pcie: PCI host bridge to bus 0000:00
- [ 3.920551] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 3.926031] pci_bus 0000:00: root bus resource [mem 0x9040000000-0x907fffffff] (bus address [0x40000000-0x7fffffff])
- [ 3.936583] pci 0000:00:00.0: enabling Extended Tags
- [ 3.942337] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
- [ 3.947568] pci 0000:00:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
- [ 3.956098] layerscape-pcie-gen4 3800000.pcie: host bridge /soc/pcie@3800000 ranges:
- [ 3.963838] layerscape-pcie-gen4 3800000.pcie: MEM 0xa040000000..0xa07fffffff -> 0x40000000
- [ 3.972531] layerscape-pcie-gen4 3800000.pcie: PCI host bridge to bus 0001:00
- [ 3.979660] pci_bus 0001:00: root bus resource [bus 00-ff]
- [ 3.985141] pci_bus 0001:00: root bus resource [mem 0xa040000000-0xa07fffffff] (bus address [0x40000000-0x7fffffff])
- [ 3.995694] pci 0001:00:00.0: enabling Extended Tags
- [ 4.001362] pci 0001:01:00.0: enabling Extended Tags
- [ 4.006588] pci 0001:01:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0003ffff] (contains BAR0 for 32 VFs)
- [ 4.015911] pci 0001:01:00.0: VF(n) BAR1 space: [mem 0x00000000-0x0fffffff] (contains BAR1 for 32 VFs)
- [ 4.025244] pci 0001:01:00.0: VF(n) BAR2 space: [mem 0x00000000-0x03ffffff 64bit pref] (contains BAR2 for 32 VFs)
- [ 4.035877] pci 0001:01:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8 GT/s x8 link at 0001:00:00.0 (capable of 126.024 Gb/s with 16 GT/s x8 link)
- [ 4.050153] pci 0001:01:00.1: enabling Extended Tags
- [ 4.055335] pci 0001:01:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0003ffff] (contains BAR0 for 32 VFs)
- [ 4.064674] pci 0001:01:00.1: VF(n) BAR1 space: [mem 0x00000000-0x0fffffff] (contains BAR1 for 32 VFs)
- [ 4.074009] pci 0001:01:00.1: VF(n) BAR2 space: [mem 0x00000000-0x03ffffff 64bit pref] (contains BAR2 for 32 VFs)
- [ 4.085019] pci 0001:00:00.0: BAR 14: assigned [mem 0xa040000000-0xa0617fffff]
- [ 4.092238] pci 0001:00:00.0: BAR 15: assigned [mem 0xa061800000-0xa069bfffff 64bit pref]
- [ 4.100412] pci 0001:01:00.0: BAR 1: assigned [mem 0xa040000000-0xa0407fffff]
- [ 4.107548] pci 0001:01:00.0: BAR 8: assigned [mem 0xa040800000-0xa0507fffff]
- [ 4.114681] pci 0001:01:00.1: BAR 1: assigned [mem 0xa050800000-0xa050ffffff]
- [ 4.121814] pci 0001:01:00.1: BAR 8: assigned [mem 0xa051000000-0xa060ffffff]
- [ 4.128947] pci 0001:01:00.0: BAR 2: assigned [mem 0xa061800000-0xa0619fffff 64bit pref]
- [ 4.137050] pci 0001:01:00.0: BAR 9: assigned [mem 0xa061a00000-0xa0659fffff 64bit pref]
- [ 4.145140] pci 0001:01:00.1: BAR 2: assigned [mem 0xa065a00000-0xa065bfffff 64bit pref]
- [ 4.153244] pci 0001:01:00.1: BAR 9: assigned [mem 0xa065c00000-0xa069bfffff 64bit pref]
- [ 4.161336] pci 0001:01:00.0: BAR 0: assigned [mem 0xa061000000-0xa061001fff]
- [ 4.168469] pci 0001:01:00.0: BAR 7: assigned [mem 0xa061002000-0xa061041fff]
- [ 4.175603] pci 0001:01:00.1: BAR 0: assigned [mem 0xa061042000-0xa061043fff]
- [ 4.182738] pci 0001:01:00.1: BAR 7: assigned [mem 0xa061044000-0xa061083fff]
- [ 4.189876] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
- [ 4.195094] pci 0001:00:00.0: bridge window [mem 0xa040000000-0xa0617fffff]
- [ 4.202220] pci 0001:00:00.0: bridge window [mem 0xa061800000-0xa069bfffff 64bit pref]
- [ 4.210311] pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
- [ 4.218769] pci 0001:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
- [ 4.227227] pci 0001:01:00.1: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256
- [ 4.235918] EINJ: ACPI disabled.
- [ 4.240317] Freescale LS2 console driver
- [ 4.244275] fsl-ls2-console: device fsl_mc_console registered
- [ 4.250047] fsl-ls2-console: device fsl_aiop_console registered
- [ 4.257937] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 4.264912] SuperH (H)SCI(F) driver initialized
- [ 4.269556] msm_serial: driver initialized
- [ 4.274380] arm-smmu 5000000.iommu: probing hardware configuration...
- [ 4.280817] arm-smmu 5000000.iommu: SMMUv2 with:
- [ 4.285426] arm-smmu 5000000.iommu: stage 1 translation
- [ 4.290731] arm-smmu 5000000.iommu: stage 2 translation
- [ 4.296033] arm-smmu 5000000.iommu: nested translation
- [ 4.301250] arm-smmu 5000000.iommu: coherent table walk
- [ 4.306553] arm-smmu 5000000.iommu: (IDR0.CTTW overridden by FW configuration)
- [ 4.313854] arm-smmu 5000000.iommu: stream matching with 128 register groups
- [ 4.320983] arm-smmu 5000000.iommu: 64 context banks (0 stage-2 only)
- [ 4.327503] arm-smmu 5000000.iommu: Supported page sizes: 0x61311000
- [ 4.333938] arm-smmu 5000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA
- [ 4.340369] arm-smmu 5000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA
- [ 4.352012] brd: module loaded
- [ 4.358605] loop: module loaded
- [ 4.362433] ahci-qoriq 3200000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode
- [ 4.371393] ahci-qoriq 3200000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
- [ 4.381410] scsi host0: ahci-qoriq
- [ 4.384920] ata1: SATA max UDMA/133 mmio [mem 0x03200000-0x0320ffff] port 0x100 irq 104
- [ 4.393088] ahci-qoriq 3210000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode
- [ 4.402041] ahci-qoriq 3210000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
- [ 4.411926] scsi host1: ahci-qoriq
- [ 4.415421] ata2: SATA max UDMA/133 mmio [mem 0x03210000-0x0321ffff] port 0x100 irq 105
- [ 4.423551] ahci-qoriq 3220000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode
- [ 4.432504] ahci-qoriq 3220000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
- [ 4.442438] scsi host2: ahci-qoriq
- [ 4.445932] ata3: SATA max UDMA/133 mmio [mem 0x03220000-0x0322ffff] port 0x100 irq 106
- [ 4.454057] ahci-qoriq 3230000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode
- [ 4.463011] ahci-qoriq 3230000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
- [ 4.472896] scsi host3: ahci-qoriq
- [ 4.476387] ata4: SATA max UDMA/133 mmio [mem 0x03230000-0x0323ffff] port 0x100 irq 107
- [ 4.485181] m25p80 spi0.0: found mt35xu512aba, expected m25p80
- [ 4.491014] m25p80 spi0.0: mt35xu512aba (65536 Kbytes)
- [ 4.497050] libphy: Fixed MDIO Bus: probed
- [ 4.501484] tun: Universal TUN/TAP device driver, 1.6
- [ 4.506789] thunder_xcv, ver 1.0
- [ 4.510026] thunder_bgx, ver 1.0
- [ 4.513261] nicpf, ver 1.0
- [ 4.516049] libphy: Freescale XGMAC MDIO Bus: probed
- [ 4.521182] libphy: Freescale XGMAC MDIO Bus: probed
- [ 4.526199] Freescale FM module, FMD API version 21.1.0
- [ 4.531461] Freescale FM Ports module
- [ 4.535118] fsl_mac: fsl_mac: FSL FMan MAC API based driver
- [ 4.540716] fsl_dpa: FSL DPAA Ethernet driver
- [ 4.545096] fsl_advanced: FSL DPAA Advanced drivers:
- [ 4.550053] fsl_proxy: FSL DPAA Proxy initialization driver
- [ 4.555646] fsl_oh: FSL FMan Offline Parsing port driver
- [ 4.561129] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- [ 4.568170] e1000: Copyright (c) 1999-2006 Intel Corporation.
- [ 4.573927] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 4.579752] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 4.585681] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
- [ 4.592634] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 4.598218] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
- [ 4.606040] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 4.612059] sky2: driver version 1.30
- [ 4.616081] VFIO - User Level meta-driver version: 0.3
- [ 4.621465] dwc3 3100000.usb: Failed to get clk 'ref': -2
- [ 4.626926] ------------[ cut here ]------------
- [ 4.631537] dwc3 3100000.usb: request value same as default, ignoring
- [ 4.637996] WARNING: CPU: 0 PID: 1 at drivers/usb/dwc3/core.c:347 dwc3_core_init+0xd14/0xd70
- [ 4.646420] Modules linked in:
- [ 4.649466] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.46-00003-g1107c2ef8370-dirty #16
- [ 4.657803] Hardware name: SolidRun LX2160A COM express type 7 module (DT)
- [ 4.664664] pstate: 40000005 (nZcv daif -PAN -UAO)
- [ 4.669443] pc : dwc3_core_init+0xd14/0xd70
- [ 4.673614] lr : dwc3_core_init+0xd14/0xd70
- [ 4.677783] sp : ffff00000999bb00
- [ 4.681085] x29: ffff00000999bb00 x28: 0000000000000007
- [ 4.686387] x27: ffff000009606068 x26: ffff00000950cb28
- [ 4.691687] x25: ffff8026db7634a0 x24: ffff000008f17000
- [ 4.696987] x23: ffff8026dd9fe410 x22: ffff0000096aa000
- [ 4.702288] x21: 0000000000000041 x20: 0000000030c11004
- [ 4.707588] x19: ffff8026db767880 x18: ffffffffffffffff
- [ 4.712888] x17: 0000000000000000 x16: 0000000000000000
- [ 4.718188] x15: ffff0000096aa708 x14: ffff0000898566ff
- [ 4.723489] x13: ffff00000985670d x12: ffff0000096aa980
- [ 4.728789] x11: ffff0000087046d0 x10: ffff00000999b7d0
- [ 4.734089] x9 : 0000000000000016 x8 : 2c746c7561666564
- [ 4.734260] ata1: SATA link down (SStatus 0 SControl 300)
- [ 4.739389] x7 : 20736120656d6173 x6 : 0000000000000183
- [ 4.739392] x5 : 0000000000000000 x4 : 0000000000000000
- [ 4.739396] x3 : ffffffffffffffff x2 : ffff0000096c3cf8
- [ 4.760674] x1 : d60cbbf6bd4c4e00 x0 : 0000000000000000
- [ 4.765975] Call trace:
- [ 4.766229] ata2: SATA link down (SStatus 0 SControl 300)
- [ 4.768409] dwc3_core_init+0xd14/0xd70
- [ 4.768412] dwc3_probe+0x8b0/0xd30
- [ 4.768422] platform_drv_probe+0x50/0xa0
- [ 4.785090] really_probe+0x1b8/0x288
- [ 4.788740] driver_probe_device+0x58/0x100
- [ 4.792911] __driver_attach+0xd4/0xd8
- [ 4.794266] ata3: SATA link down (SStatus 0 SControl 300)
- [ 4.796647] bus_for_each_dev+0x74/0xc8
- [ 4.796649] driver_attach+0x20/0x28
- [ 4.796652] bus_add_driver+0x1ac/0x218
- [ 4.796656] driver_register+0x60/0x110
- [ 4.817064] __platform_driver_register+0x40/0x48
- [ 4.821756] dwc3_driver_init+0x18/0x20
- [ 4.825581] do_one_initcall+0x5c/0x178
- [ 4.826260] ata4: SATA link down (SStatus 0 SControl 300)
- [ 4.829404] kernel_init_freeable+0x198/0x244
- [ 4.829408] kernel_init+0x10/0x108
- [ 4.829412] ret_from_fork+0x10/0x18
- [ 4.846174] ---[ end trace 5d66e2414f1c32a1 ]---
- [ 4.851087] dwc3 3110000.usb: Failed to get clk 'ref': -2
- [ 4.857036] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 4.863561] ehci-pci: EHCI PCI platform driver
- [ 4.868012] ehci-platform: EHCI generic platform driver
- [ 4.873267] ehci-orion: EHCI orion driver
- [ 4.877302] ehci-exynos: EHCI EXYNOS driver
- [ 4.881506] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 4.887683] ohci-pci: OHCI PCI platform driver
- [ 4.892133] ohci-platform: OHCI generic platform driver
- [ 4.897384] ohci-exynos: OHCI EXYNOS driver
- [ 4.901676] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 4.907163] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
- [ 4.915006] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
- [ 4.924409] xhci-hcd xhci-hcd.0.auto: irq 23, io mem 0x03100000
- [ 4.930601] hub 1-0:1.0: USB hub found
- [ 4.934356] hub 1-0:1.0: 1 port detected
- [ 4.938378] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 4.943862] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
- [ 4.951512] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
- [ 4.958139] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 4.966387] hub 2-0:1.0: USB hub found
- [ 4.970139] hub 2-0:1.0: 1 port detected
- [ 4.974190] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 4.979676] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
- [ 4.987508] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
- [ 4.996908] xhci-hcd xhci-hcd.1.auto: irq 24, io mem 0x03110000
- [ 5.003059] hub 3-0:1.0: USB hub found
- [ 5.006813] hub 3-0:1.0: 1 port detected
- [ 5.010826] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 5.016310] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
- [ 5.023967] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
- [ 5.030600] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 5.038846] hub 4-0:1.0: USB hub found
- [ 5.042602] hub 4-0:1.0: 1 port detected
- [ 5.046720] usbcore: registered new interface driver usb-storage
- [ 5.059246] rtc-pcf2127-i2c 2-0051: oscillator stop detected, date/time is not reliable
- [ 5.067294] rtc-pcf2127-i2c 2-0051: rtc core: registered rtc-pcf2127-i2c as rtc0
- [ 5.074899] i2c /dev entries driver
- [ 5.079589] i2c i2c-0: Added multiplexed i2c bus 3
- [ 5.084507] i2c i2c-0: Added multiplexed i2c bus 4
- [ 5.089366] i2c i2c-0: Added multiplexed i2c bus 5
- [ 5.094278] i2c i2c-0: Added multiplexed i2c bus 6
- [ 5.099136] i2c i2c-0: Added multiplexed i2c bus 7
- [ 5.103990] i2c i2c-0: Added multiplexed i2c bus 8
- [ 5.108844] i2c i2c-0: Added multiplexed i2c bus 9
- [ 5.113701] i2c i2c-0: Added multiplexed i2c bus 10
- [ 5.118572] pca954x 0-0077: registered 8 multiplexed busses for I2C mux pca9547
- [ 5.126278] lm90 6-0048: Linked as a consumer to regulator.1
- [ 5.136341] amc6821 4-0018: Error reading configuration register, aborting.
- [ 5.143301] amc6821: probe of 4-0018 failed with error -5
- [ 5.150204] qoriq_cpufreq: Freescale QorIQ CPU frequency scaling driver
- [ 5.157368] sdhci: Secure Digital Host Controller Interface driver
- [ 5.163540] sdhci: Copyright(c) Pierre Ossman
- [ 5.167985] Synopsys Designware Multimedia Card Interface Driver
- [ 5.174255] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 5.204648] mmc0: SDHCI controller on 2140000.esdhc [2140000.esdhc] using ADMA 64-bit
- [ 5.236145] mmc1: SDHCI controller on 2150000.esdhc [2150000.esdhc] using ADMA 64-bit
- [ 5.245544] caam 8000000.crypto: device ID = 0x0a1a020000000000 (Era 10)
- [ 5.252253] caam 8000000.crypto: job rings = 3, qi = 1
- [ 5.260324] caam algorithms registered in /proc/crypto
- [ 5.266079] caam 8000000.crypto: caam pkc algorithms registered in /proc/crypto
- [ 5.273672] caam_jr 8010000.jr: registering rng-caam
- [ 5.280785] caam 8000000.crypto: algorithms registered in /proc/crypto
- [ 5.287827] usbcore: registered new interface driver usbhid
- [ 5.293412] usbhid: USB HID core driver
- [ 5.297424] No fsl,qman node
- [ 5.300423] Freescale USDPAA process driver
- [ 5.304654] fsl-usdpaa: no region found
- [ 5.309499] Freescale USDPAA process IRQ driver
- [ 5.315673] optee: probing for conduit method from DT.
- [ 5.320817] optee: api uid mismatch
- [ 5.324726] pktgen: Packet Generator for packet performance testing. Version: 2.75
- [ 5.329669] mmc0: new ultra high speed SDR50 SDHC card at address aaaa
- [ 5.339309] mmcblk0: mmc0:aaaa SL08G 7.40 GiB (ro)
- [ 5.340009] Initializing XFRM netlink socket
- [ 5.348127] usb 3-1: new high-speed USB device number 2 using xhci-hcd
- [ 5.348411] NET: Registered protocol family 10
- [ 5.359621] Segment Routing with IPv6
- [ 5.363310] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
- [ 5.369410] NET: Registered protocol family 17
- [ 5.373864] NET: Registered protocol family 15
- [ 5.378319] Bridge firewalling registered
- [ 5.382368] 8021q: 802.1Q VLAN Support v1.8
- [ 5.386565] 9pnet: Installing 9P2000 support
- [ 5.390858] Key type dns_resolver registered
- [ 5.395406] registered taskstats version 1
- [ 5.399764] Btrfs loaded, crc32c=crc32c-generic
- [ 5.405297] iommu: Adding device dprc.1 to group 0
- [ 5.462678] mmc1: new HS400 MMC card at address 0001
- [ 5.468617] mmcblk1: mmc1:0001 DF4064 58.2 GiB
- [ 5.473498] mmcblk1boot0: mmc1:0001 DF4064 partition 1 4.00 MiB
- [ 5.479769] mmcblk1boot1: mmc1:0001 DF4064 partition 2 4.00 MiB
- [ 5.497699] iommu: Adding device dpni.0 to group 0
- [ 5.502541] mmcblk1rpmb: mmc1:0001 DF4064 partition 3 4.00 MiB, chardev (236:0)
- [ 5.509932] fsl_mc_dprc dprc.1: No more resources of type dpmcp left
- [ 5.516332] iommu: Adding device dpbp.1 to group 0
- [ 5.521168] iommu: Adding device dpbp.0 to group 0
- [ 5.526257] iommu: Adding device dpmac.17 to group 0
- [ 5.531271] fsl_mc_dprc dprc.1: No more resources of type dpmcp left
- [ 5.538687] iommu: Adding device dpmac.10 to group 0
- [ 5.542631] hub 3-1:1.0: USB hub found
- [ 5.543660] fsl_mc_dprc dprc.1: No more resources of type dpmcp left
- [ 5.547422] hub 3-1:1.0: 4 ports detected
- [ 5.553773] iommu: Adding device dpmac.9 to group 0
- [ 5.562611] fsl_mc_dprc dprc.1: No more resources of type dpmcp left
- [ 5.568996] iommu: Adding device dpmac.8 to group 0
- [ 5.573879] fsl_mc_dprc dprc.1: No more resources of type dpmcp left
- [ 5.580261] iommu: Adding device dpmac.7 to group 0
- [ 5.585145] fsl_mc_dprc dprc.1: No more resources of type dpmcp left
- [ 5.591529] iommu: Adding device dpmac.6 to group 0
- [ 5.596408] fsl_mc_dprc dprc.1: No more resources of type dpmcp left
- [ 5.602791] iommu: Adding device dpmac.5 to group 0
- [ 5.607671] fsl_mc_dprc dprc.1: No more resources of type dpmcp left
- [ 5.614055] iommu: Adding device dpmac.4 to group 0
- [ 5.618934] fsl_mc_dprc dprc.1: No more resources of type dpmcp left
- [ 5.625317] iommu: Adding device dpmac.3 to group 0
- [ 5.630196] fsl_mc_dprc dprc.1: No more resources of type dpmcp left
- [ 5.636580] iommu: Adding device dpseci.0 to group 0
- [ 5.640150] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
- [ 5.641561] fsl_mc_dprc dprc.1: No more resources of type dpmcp left
- [ 5.655540] iommu: Adding device dpmcp.35 to group 0
- [ 5.661109] iommu: Adding device dpmcp.34 to group 0
- [ 5.666618] iommu: Adding device dpmcp.33 to group 0
- [ 5.672126] iommu: Adding device dpmcp.32 to group 0
- [ 5.677656] iommu: Adding device dpmcp.31 to group 0
- [ 5.683163] iommu: Adding device dpmcp.30 to group 0
- [ 5.686614] hub 4-1:1.0: USB hub found
- [ 5.688667] iommu: Adding device dpmcp.29 to group 0
- [ 5.691902] hub 4-1:1.0: 4 ports detected
- [ 5.697361] iommu: Adding device dpmcp.28 to group 0
- [ 5.706330] iommu: Adding device dpmcp.27 to group 0
- [ 5.711834] iommu: Adding device dpmcp.26 to group 0
- [ 5.717340] iommu: Adding device dpmcp.25 to group 0
- [ 5.722878] iommu: Adding device dpmcp.24 to group 0
- [ 5.728388] iommu: Adding device dpmcp.23 to group 0
- [ 5.733892] iommu: Adding device dpmcp.22 to group 0
- [ 5.739423] iommu: Adding device dpmcp.21 to group 0
- [ 5.744928] iommu: Adding device dpmcp.20 to group 0
- [ 5.750435] iommu: Adding device dpmcp.19 to group 0
- [ 5.755972] iommu: Adding device dpmcp.18 to group 0
- [ 5.761480] iommu: Adding device dpmcp.17 to group 0
- [ 5.766990] iommu: Adding device dpmcp.16 to group 0
- [ 5.772525] iommu: Adding device dpmcp.15 to group 0
- [ 5.778095] iommu: Adding device dpmcp.14 to group 0
- [ 5.783661] iommu: Adding device dpmcp.13 to group 0
- [ 5.789163] iommu: Adding device dpmcp.12 to group 0
- [ 5.794672] iommu: Adding device dpmcp.11 to group 0
- [ 5.800215] iommu: Adding device dpmcp.10 to group 0
- [ 5.805779] iommu: Adding device dpmcp.9 to group 0
- [ 5.811199] iommu: Adding device dpmcp.8 to group 0
- [ 5.816624] iommu: Adding device dpmcp.7 to group 0
- [ 5.822042] iommu: Adding device dpmcp.6 to group 0
- [ 5.827461] iommu: Adding device dpmcp.5 to group 0
- [ 5.832882] iommu: Adding device dpmcp.4 to group 0
- [ 5.838301] iommu: Adding device dpmcp.3 to group 0
- [ 5.843721] iommu: Adding device dpmcp.2 to group 0
- [ 5.849199] iommu: Adding device dpmcp.1 to group 0
- [ 5.854118] iommu: Adding device dprtc.0 to group 0
- [ 5.859528] fsl_dpaa2_ptp dprtc.0: Linked as a consumer to dpmcp.35
- [ 5.866911] pps pps0: new PPS source ptp0
- [ 5.872491] iommu: Adding device dpio.15 to group 0
- [ 5.877881] fsl_mc_dpio dpio.15: Linked as a consumer to dpmcp.34
- [ 5.886879] fsl_mc_dpio dpio.15: probed
- [ 5.892813] iommu: Adding device dpio.14 to group 0
- [ 5.898203] fsl_mc_dpio dpio.14: Linked as a consumer to dpmcp.33
- [ 5.904133] usb 3-1.3: new high-speed USB device number 3 using xhci-hcd
- [ 5.906922] fsl_mc_dpio dpio.14: probed
- [ 5.916901] iommu: Adding device dpio.13 to group 0
- [ 5.922291] fsl_mc_dpio dpio.13: Linked as a consumer to dpmcp.32
- [ 5.930947] fsl_mc_dpio dpio.13: probed
- [ 5.936882] iommu: Adding device dpio.12 to group 0
- [ 5.942270] fsl_mc_dpio dpio.12: Linked as a consumer to dpmcp.31
- [ 5.950987] fsl_mc_dpio dpio.12: probed
- [ 5.956887] iommu: Adding device dpio.11 to group 0
- [ 5.962277] fsl_mc_dpio dpio.11: Linked as a consumer to dpmcp.30
- [ 5.970993] fsl_mc_dpio dpio.11: probed
- [ 5.976898] iommu: Adding device dpio.10 to group 0
- [ 5.982289] fsl_mc_dpio dpio.10: Linked as a consumer to dpmcp.29
- [ 5.991005] fsl_mc_dpio dpio.10: probed
- [ 5.996907] iommu: Adding device dpio.9 to group 0
- [ 6.002210] fsl_mc_dpio dpio.9: Linked as a consumer to dpmcp.28
- [ 6.010836] fsl_mc_dpio dpio.9: probed
- [ 6.016676] iommu: Adding device dpio.8 to group 0
- [ 6.021979] fsl_mc_dpio dpio.8: Linked as a consumer to dpmcp.27
- [ 6.028370] random: fast init done
- [ 6.030763] fsl_mc_dpio dpio.8: probed
- [ 6.037631] iommu: Adding device dpio.7 to group 0
- [ 6.042935] fsl_mc_dpio dpio.7: Linked as a consumer to dpmcp.26
- [ 6.051577] fsl_mc_dpio dpio.7: probed
- [ 6.054568] hub 3-1.3:1.0: USB hub found
- [ 6.057454] iommu: Adding device dpio.6 to group 0
- [ 6.059260] hub 3-1.3:1.0: 4 ports detected
- [ 6.064621] fsl_mc_dpio dpio.6: Linked as a consumer to dpmcp.25
- [ 6.076766] fsl_mc_dpio dpio.6: probed
- [ 6.082576] iommu: Adding device dpio.5 to group 0
- [ 6.087883] fsl_mc_dpio dpio.5: Linked as a consumer to dpmcp.24
- [ 6.096522] fsl_mc_dpio dpio.5: probed
- [ 6.102358] iommu: Adding device dpio.4 to group 0
- [ 6.107664] fsl_mc_dpio dpio.4: Linked as a consumer to dpmcp.23
- [ 6.116294] fsl_mc_dpio dpio.4: probed
- [ 6.118510] usb 4-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
- [ 6.121689] iommu: Adding device dpio.3 to group 0
- [ 6.132619] fsl_mc_dpio dpio.3: Linked as a consumer to dpmcp.22
- [ 6.141240] fsl_mc_dpio dpio.3: probed
- [ 6.145527] usb-storage 4-1.1:1.0: USB Mass Storage device detected
- [ 6.147093] iommu: Adding device dpio.2 to group 0
- [ 6.152043] scsi host4: usb-storage 4-1.1:1.0
- [ 6.157092] fsl_mc_dpio dpio.2: Linked as a consumer to dpmcp.21
- [ 6.169169] fsl_mc_dpio dpio.2: probed
- [ 6.174972] iommu: Adding device dpio.1 to group 0
- [ 6.180121] fsl_mc_dpio dpio.1: Linked as a consumer to dpmcp.20
- [ 6.188747] fsl_mc_dpio dpio.1: probed
- [ 6.194599] iommu: Adding device dpio.0 to group 0
- [ 6.199906] fsl_mc_dpio dpio.0: Linked as a consumer to dpmcp.19
- [ 6.208542] fsl_mc_dpio dpio.0: probed
- [ 6.212845] iommu: Adding device dpcon.31 to group 0
- [ 6.217856] iommu: Adding device dpcon.30 to group 0
- [ 6.222866] iommu: Adding device dpcon.29 to group 0
- [ 6.227874] iommu: Adding device dpcon.28 to group 0
- [ 6.232886] iommu: Adding device dpcon.27 to group 0
- [ 6.237896] iommu: Adding device dpcon.26 to group 0
- [ 6.242904] iommu: Adding device dpcon.25 to group 0
- [ 6.247915] iommu: Adding device dpcon.24 to group 0
- [ 6.252925] iommu: Adding device dpcon.23 to group 0
- [ 6.257933] iommu: Adding device dpcon.22 to group 0
- [ 6.262943] iommu: Adding device dpcon.21 to group 0
- [ 6.267952] iommu: Adding device dpcon.20 to group 0
- [ 6.272961] iommu: Adding device dpcon.19 to group 0
- [ 6.277971] iommu: Adding device dpcon.18 to group 0
- [ 6.282981] iommu: Adding device dpcon.17 to group 0
- [ 6.288002] iommu: Adding device dpcon.16 to group 0
- [ 6.293011] iommu: Adding device dpcon.15 to group 0
- [ 6.298024] iommu: Adding device dpcon.14 to group 0
- [ 6.303031] iommu: Adding device dpcon.13 to group 0
- [ 6.308044] iommu: Adding device dpcon.12 to group 0
- [ 6.313056] iommu: Adding device dpcon.11 to group 0
- [ 6.318069] iommu: Adding device dpcon.10 to group 0
- [ 6.323081] iommu: Adding device dpcon.9 to group 0
- [ 6.328015] iommu: Adding device dpcon.8 to group 0
- [ 6.332938] iommu: Adding device dpcon.7 to group 0
- [ 6.337865] iommu: Adding device dpcon.6 to group 0
- [ 6.342788] iommu: Adding device dpcon.5 to group 0
- [ 6.347713] iommu: Adding device dpcon.4 to group 0
- [ 6.352641] iommu: Adding device dpcon.3 to group 0
- [ 6.357565] iommu: Adding device dpcon.2 to group 0
- [ 6.362491] iommu: Adding device dpcon.1 to group 0
- [ 6.367418] iommu: Adding device dpcon.0 to group 0
- [ 6.375435] fsl_mc_dprc dprc.1: DPRC device bound to driver
- [ 6.381572] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpmcp.18
- [ 6.423164] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpcon.31
- [ 6.431846] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpio.15
- [ 6.438436] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpcon.30
- [ 6.447119] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpio.14
- [ 6.453742] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpcon.29
- [ 6.462469] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpio.13
- [ 6.469058] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpcon.28
- [ 6.477745] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpio.12
- [ 6.484382] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpcon.27
- [ 6.493111] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpio.11
- [ 6.499699] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpcon.26
- [ 6.508382] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpio.10
- [ 6.515016] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpcon.25
- [ 6.523741] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpio.9
- [ 6.530254] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpcon.24
- [ 6.538978] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpio.8
- [ 6.545490] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpcon.23
- [ 6.554217] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpio.7
- [ 6.560727] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpcon.22
- [ 6.569455] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpio.6
- [ 6.575965] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpcon.21
- [ 6.584691] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpio.5
- [ 6.591202] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpcon.20
- [ 6.599926] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpio.4
- [ 6.606439] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpcon.19
- [ 6.615163] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpio.3
- [ 6.621676] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpcon.18
- [ 6.630403] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpio.2
- [ 6.636913] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpcon.17
- [ 6.645640] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpio.1
- [ 6.652154] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpcon.16
- [ 6.660877] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpio.0
- [ 6.667422] fsl_dpaa2_eth dpni.0: Linked as a consumer to dpbp.1
- [ 6.745318] fsl_dpaa2_eth dpni.0: Probed interface eth0
- [ 6.751110] dpaa2_mac dpmac.17: Linked as a consumer to dpmcp.17
- [ 6.760599] dpaa2_mac dpmac.17: Connected to rgmii-id PHY.
- [ 6.766675] dpaa2_mac dpmac.10: Linked as a consumer to dpmcp.16
- [ 6.775992] dpaa2_mac dpmac.10: Registered fixed PHY.
- [ 6.781584] dpaa2_mac dpmac.9: Linked as a consumer to dpmcp.15
- [ 6.790737] dpaa2_mac dpmac.9: Registered fixed PHY.
- [ 6.796237] dpaa2_mac dpmac.8: Linked as a consumer to dpmcp.14
- [ 6.805491] dpaa2_mac dpmac.8: Registered fixed PHY.
- [ 6.810984] dpaa2_mac dpmac.7: Linked as a consumer to dpmcp.13
- [ 6.820225] dpaa2_mac dpmac.7: Registered fixed PHY.
- [ 6.825717] dpaa2_mac dpmac.6: Linked as a consumer to dpmcp.12
- [ 6.834960] dpaa2_mac dpmac.6: Registered fixed PHY.
- [ 6.840461] dpaa2_mac dpmac.5: Linked as a consumer to dpmcp.11
- [ 6.849709] dpaa2_mac dpmac.5: Registered fixed PHY.
- [ 6.855203] dpaa2_mac dpmac.4: Linked as a consumer to dpmcp.10
- [ 6.864458] dpaa2_mac dpmac.4: Registered fixed PHY.
- [ 6.869952] dpaa2_mac dpmac.3: Linked as a consumer to dpmcp.9
- [ 6.879037] dpaa2_mac dpmac.3: Registered fixed PHY.
- [ 6.884621] dpaa2_caam dpseci.0: Linked as a consumer to dpmcp.8
- [ 6.891642] dpaa2_caam dpseci.0: dpseci v5.3
- [ 6.918644] dpaa2_caam dpseci.0: Linked as a consumer to dpio.15
- [ 6.924650] dpaa2_caam dpseci.0: Linked as a consumer to dpio.14
- [ 6.930651] dpaa2_caam dpseci.0: Linked as a consumer to dpio.13
- [ 6.936653] dpaa2_caam dpseci.0: Linked as a consumer to dpio.12
- [ 6.942654] dpaa2_caam dpseci.0: Linked as a consumer to dpio.11
- [ 6.948655] dpaa2_caam dpseci.0: Linked as a consumer to dpio.10
- [ 6.954656] dpaa2_caam dpseci.0: Linked as a consumer to dpio.9
- [ 6.960570] dpaa2_caam dpseci.0: Linked as a consumer to dpio.8
- [ 6.966484] dpaa2_caam dpseci.0: Linked as a consumer to dpio.7
- [ 6.972398] dpaa2_caam dpseci.0: Linked as a consumer to dpio.6
- [ 6.978311] dpaa2_caam dpseci.0: Linked as a consumer to dpio.5
- [ 6.984224] dpaa2_caam dpseci.0: Linked as a consumer to dpio.4
- [ 6.990136] dpaa2_caam dpseci.0: Linked as a consumer to dpio.3
- [ 6.996049] dpaa2_caam dpseci.0: Linked as a consumer to dpio.2
- [ 7.001962] dpaa2_caam dpseci.0: Linked as a consumer to dpio.1
- [ 7.007876] dpaa2_caam dpseci.0: Linked as a consumer to dpio.0
- [ 7.026513] dpaa2_caam dpseci.0: algorithms registered in /proc/crypto
- [ 7.033627] dpaa2_caam dpseci.0: hash algorithms registered in /proc/crypto
- [ 7.046561] rtc-pcf2127-i2c 2-0051: oscillator stop detected, date/time is not reliable
- [ 7.054561] rtc-pcf2127-i2c 2-0051: hctosys: unable to read the hardware clock
- [ 7.061915] ALSA device list:
- [ 7.064875] No soundcards found.
- [ 7.068411] RAMDISK: gzip image found at block 0
- [ 7.196560] scsi 4:0:0:0: Direct-Access SanDisk Cruzer Glide 3.0 1.00 PQ: 0 ANSI: 6
- [ 7.205190] sd 4:0:0:0: [sda] 30464000 512-byte logical blocks: (15.6 GB/14.5 GiB)
- [ 7.213703] sd 4:0:0:0: [sda] Write Protect is off
- [ 7.218850] sd 4:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 7.230810] sda: sda1
- [ 7.234580] sd 4:0:0:0: [sda] Attached SCSI removable disk
- [ 7.378332] EXT4-fs (ram0): mounted filesystem with ordered data mode. Opts: (null)
- [ 7.386006] VFS: Mounted root (ext4 filesystem) readonly on device 1:0.
- [ 7.392742] devtmpfs: mounted
- [ 7.396144] Freeing unused kernel memory: 1536K
- [ 7.400780] Run /sbin/init as init process
- INIT: version 2.88 booting
- Starting udev
- [ 7.492388] udevd[2286]: starting version 3.2.5
- [ 7.497139] random: udevd: uninitialized urandom read (16 bytes read)
- [ 7.503617] random: udevd: uninitialized urandom read (16 bytes read)
- [ 7.510101] random: udevd: uninitialized urandom read (16 bytes read)
- [ 7.519347] udevd[2287]: starting eudev-3.2.5
- [ 7.712462] EXT4-fs (sda1): recovery complete
- [ 7.716900] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 7.744069] EXT4-fs (ram0): re-mounted. Opts: (null)
- [ 7.783390] rtc-pcf2127-i2c 2-0051: oscillator stop detected, date/time is not reliable
- hwclock: RTC_RD_TIME: Invalid argument
- Mon Dec 17 07:38:28 UTC 2018
- [ 7.804140] dpaa2_mac dpmac.9 (unnamed net_device) (uninitialized): Link is Up - 1Gbps/Full - flow control off
- [ 7.804147] dpaa2_mac dpmac.10 (unnamed net_device) (uninitialized): Link is Up - 1Gbps/Full - flow control off
- [ 7.836130] dpaa2_mac dpmac.7 (unnamed net_device) (uninitialized): Link is Up - 1Gbps/Full - flow control off
- [ 7.836140] dpaa2_mac dpmac.8 (unnamed net_device) (uninitialized): Link is Up - 1Gbps/Full - flow control off
- [ 7.868130] dpaa2_mac dpmac.5 (unnamed net_device) (uninitialized): Link is Up - 1Gbps/Full - flow control off
- [ 7.868136] dpaa2_mac dpmac.6 (unnamed net_device) (uninitialized): Link is Up - 1Gbps/Full - flow control off
- [ 7.900140] dpaa2_mac dpmac.4 (unnamed net_device) (uninitialized): Link is Up - 1Gbps/Full - flow control off
- [ 7.900148] dpaa2_mac dpmac.3 (unnamed net_device) (uninitialized): Link is Up - 1Gbps/Full - flow control off
- Configuring packages on first boot....
- (This may take several minutes. Please do not power off the machine.)
- Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
- update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
- INIT: Entering runlevel: 5
- Configuring network interfaces... done.
- Starting OpenBSD Secure Shell server: sshd
- generating ssh RSA host key...
- sync: ignoring all arguments
- sync: ignoring all arguments
- generating ssh ECDSA host key...
- sync: ignoring all arguments
- sync: ignoring all arguments
- generating ssh ED25519 host key...
- sync: ignoring all arguments
- sync: ignoring all arguments
- done.
- Starting syslogd/klogd: done
- QorIQ LSDK (NXP Reference Distro) 2.0 TinyDistro /dev/ttyAMA0
- TinyDistro login: [ 10.844445] dpaa2_mac dpmac.17 (unnamed net_device) (uninitialized): Link is Up - 1Gbps/Full - flow control off
- root
- root@TinyDistro:~# resize
- COLUMNS=86;LINES=55;export COLUMNS LINES;
- root@TinyDistro:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement