API tools faq
paste
Advertisement
kuailexs

var/log/dmesg-1

kuailexs
Aug 31st, 2017
1,863
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 102.11 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 3.4.0-cyanogenmod (feifei@feifei) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Thu Aug 31 21:16:44 CST 2017
  4. [ 0.000000] CPU: ARMv7 Processor [512f06f1] revision 1 (ARMv7), cr=10c5387d
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  6. [ 0.000000] Machine: Qualcomm MSM 8974 (Flattened Device Tree), model: Qualcomm MSM 8974Pro-AC MTP V4
  7. [ 0.000000] Powerup reason=0x11
  8. [ 0.000000] Hw version=0x45
  9. [ 0.000000] qcom,ion-heap@28 reserved EBI1 size 614000
  10. [ 0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-5000000
  11. [ 0.000000] qcom,msm-contig-mem reserved EBI1 size 280000
  12. [ 0.000000] Node qcom,msm-mem-hole removed memory 5a00000-d200000
  13. [ 0.000000] Node qcom,msm-mem-hole removed memory fa00000-ff00000
  14. [ 0.000000] memory pool 3 (start 0x7f700000 size 900000) initialized
  15. [ 0.000000] Initialized persistent memory from 7f500000-7f6fffff
  16. [ 0.000000] cma: CMA: reserved 16 MiB at 30800000
  17. [ 0.000000] cma: Found secure_region, memory base 0, size 252 MiB
  18. [ 0.000000] cma: CMA: reserved 252 MiB at 6f800000
  19. [ 0.000000] cma: Found adsp_region, memory base 0, size 63 MiB
  20. [ 0.000000] cma: CMA: reserved 64 MiB at 6b800000
  21. [ 0.000000] cma: Found qsecom_region, memory base 0, size 17 MiB
  22. [ 0.000000] cma: CMA: reserved 20 MiB at 6a400000
  23. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  24. [ 0.000000] IMEM DT static mapping successful
  25. [ 0.000000] Zone PFN ranges:
  26. [ 0.000000] Normal 0x00000000 -> 0x00031900
  27. [ 0.000000] HighMem 0x00031900 -> 0x0007f700
  28. [ 0.000000] Movable zone start PFN for each node
  29. [ 0.000000] Early memory PFN ranges
  30. [ 0.000000] 0: 0x00000000 -> 0x00005a00
  31. [ 0.000000] 0: 0x0000d200 -> 0x0000fa00
  32. [ 0.000000] 0: 0x0000ff00 -> 0x0007f700
  33. [ 0.000000] On node 0 totalpages: 489984
  34. [ 0.000000] free_area_init_node: node 0, pgdat c12c08c0, node_mem_map cd200000
  35. [ 0.000000] Normal zone: 1586 pages used for memmap
  36. [ 0.000000] Normal zone: 0 pages reserved
  37. [ 0.000000] Normal zone: 169422 pages, LIFO batch:31
  38. [ 0.000000] HighMem zone: 2492 pages used for memmap
  39. [ 0.000000] HighMem zone: 316484 pages, LIFO batch:31
  40. [ 0.000000] PERCPU: Embedded 9 pages/cpu @ce24c000 s16320 r8192 d12352 u36864
  41. [ 0.000000] pcpu-alloc: s16320 r8192 d12352 u36864 alloc=9*4096
  42. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  43. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 485906
  44. [ 0.000000] Kernel command line: console=tty0 vmalloc=340M androidboot.hardware=cancro user_debug=31 msm_rtb.filter=0x37 ehci-hcd.park=3 androidboot.bootdevice=msm_sdcc.1 selinux=permissive androidboot.emmc=true androidboot.serialno=a1283c28 androidboot.hwversion=45 syspart=system bl_version=1.0 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_jdi_fhd_cmd_95
  45. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  46. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  47. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  48. [ 0.000000] Memory: 90MB 40MB 1784MB = 1914MB total
  49. [ 0.000000] Memory: 1523624k/1523624k available, 436312k reserved, 929792K highmem
  50. [ 0.000000] Virtual kernel memory layout:
  51. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  52. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  53. [ 0.000000] vmalloc : 0xf2000000 - 0xff000000 ( 208 MB)
  54. [ 0.000000] lowmem : 0xcff00000 - 0xf1900000 ( 538 MB)
  55. [ 0.000000] vmalloc : 0xcfa00000 - 0xcff00000 ( 5 MB)
  56. [ 0.000000] lowmem : 0xcd200000 - 0xcfa00000 ( 40 MB)
  57. [ 0.000000] vmalloc : 0xc5a00000 - 0xcd200000 ( 120 MB)
  58. [ 0.000000] lowmem : 0xc0000000 - 0xc5a00000 ( 90 MB)
  59. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  60. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  61. [ 0.000000] .text : 0xc0008000 - 0xc10b8000 (17088 kB)
  62. [ 0.000000] .init : 0xc1100000 - 0xc120efc0 (1084 kB)
  63. [ 0.000000] .data : 0xc1210000 - 0xc12fa2ec ( 937 kB)
  64. [ 0.000000] .bss : 0xc12fa310 - 0xc160619c (3120 kB)
  65. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  66. [ 0.000000] Preemptible hierarchical RCU implementation.
  67. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  68. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  69. [ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
  70. [ 0.000000] Switching to timer-based delay loop
  71. [ 0.000000] Console: colour dummy device 80x30
  72. [ 0.000000] console [tty0] enabled
  73. [ 0.000694] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  74. [ 0.000731] pid_max: default: 32768 minimum: 301
  75. [ 0.000874] Security Framework initialized
  76. [ 0.000936] AppArmor: AppArmor initialized
  77. [ 0.000954] Yama: becoming mindful.
  78. [ 0.001036] Mount-cache hash table entries: 512
  79. [ 0.001731] Initializing cgroup subsys cpuacct
  80. [ 0.001754] Initializing cgroup subsys freezer
  81. [ 0.001773] Initializing cgroup subsys bfqio
  82. [ 0.001820] CPU: Testing write buffer coherency: ok
  83. [ 0.001996] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  84. [ 0.002066] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
  85. [ 0.005210] Setting up static identity map for 0xa0a778 - 0xa0a800
  86. [ 0.005309] Configuring XPU violations to be fatal errors
  87. [ 0.005330] MSM Memory Dump table set up
  88. [ 0.006721] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  89. [ 0.007474] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  90. [ 0.008216] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  91. [ 0.008298] Brought up 4 CPUs
  92. [ 0.008349] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  93. [ 0.009097] devtmpfs: initialized
  94. [ 0.019231] EVM: security.selinux
  95. [ 0.019249] EVM: security.SMACK64
  96. [ 0.019264] EVM: security.capability
  97. [ 0.020024] VFP support v0.3: implementor 51 architecture 64 part 6f variant 2 rev 1
  98. [ 0.020064] ------------[ cut here ]------------
  99. [ 0.020096] WARNING: at /media/feifei/linux/ubuntu/kernel/xiaomi/cancro/fs/proc/generic.c:323 __xlate_proc_name+0xa8/0xbc()
  100. [ 0.020127] name 'cpu/vfp_bounce'
  101. [ 0.020141] Modules linked in:
  102. [ 0.020159] Backtrace:
  103. [ 0.020190] [<c010a72c>] (dump_backtrace+0x0/0x104) from [<c09f8b48>] (dump_stack+0x18/0x1c)
  104. [ 0.020217] r6:c02ac850 r5:00000009 r4:f0469ec0 r3:271ae91c
  105. [ 0.020267] [<c09f8b30>] (dump_stack+0x0/0x1c) from [<c0197df4>] (warn_slowpath_common+0x54/0x6c)
  106. [ 0.020302] [<c0197da0>] (warn_slowpath_common+0x0/0x6c) from [<c0197e44>] (warn_slowpath_fmt+0x38/0x40)
  107. [ 0.020329] r8:f0469f3c r7:c0f1f133 r6:00000003 r5:c0f1f133 r4:00000000
  108. [ 0.020367] r3:00000009
  109. [ 0.020397] [<c0197e0c>] (warn_slowpath_fmt+0x0/0x40) from [<c02ac850>] (__xlate_proc_name+0xa8/0xbc)
  110. [ 0.020424] r3:c0f1f133 r2:c0f58686
  111. [ 0.020458] [<c02ac7a8>] (__xlate_proc_name+0x0/0xbc) from [<c02ac8bc>] (__proc_create+0x58/0xf8)
  112. [ 0.020483] r9:00000000 r8:00008124 r7:00000001 r6:c1223438 r5:f0469f3c
  113. [ 0.020521] r4:c0f1f133
  114. [ 0.020550] [<c02ac864>] (__proc_create+0x0/0xf8) from [<c02acbf4>] (proc_create_data+0x6c/0xa8)
  115. [ 0.020576] r8:c12fa340 r7:c1102f30 r6:c1223438 r5:c0b000c4 r4:51406f21
  116. [ 0.020635] [<c02acb88>] (proc_create_data+0x0/0xa8) from [<c11030ac>] (vfp_init+0x17c/0x1e8)
  117. [ 0.020660] r5:c12fa3d8 r4:51406f21
  118. [ 0.020694] [<c1102f30>] (vfp_init+0x0/0x1e8) from [<c0100604>] (do_one_initcall+0x98/0x15c)
  119. [ 0.020719] r6:c1209ae0 r5:c12008fc r4:00000001
  120. [ 0.020759] [<c010056c>] (do_one_initcall+0x0/0x15c) from [<c1100be4>] (kernel_init+0x104/0x1bc)
  121. [ 0.020798] [<c1100ae0>] (kernel_init+0x0/0x1bc) from [<c019bd5c>] (do_exit+0x0/0x7e0)
  122. [ 0.020823] r9:00000000 r8:00000000 r7:00000013 r6:c019bd5c r5:c1100ae0
  123. [ 0.020860] r4:00000000
  124. [ 0.020898] ---[ end trace da227214a82491b7 ]---
  125. [ 0.020917] Failed to create procfs node for VFP bounce reporting
  126. [ 0.021291] dummy:
  127. [ 0.039200] NET: Registered protocol family 16
  128. [ 0.041636] DMA: preallocated 256 KiB pool for atomic coherent allocations
  129. [ 0.043339] KPI: Bootloader start count = 1759090334
  130. [ 0.043361] KPI: Bootloader end count = 2080799266
  131. [ 0.043378] KPI: Bootloader display count = 3350531179
  132. [ 0.043395] KPI: Bootloader load kernel count = 1389631597
  133. [ 0.043413] KPI: Kernel MPM timestamp = 133731
  134. [ 0.043429] KPI: Kernel MPM Clock frequency = 32768
  135. [ 0.043455] socinfo_print: v9, id=194, ver=1.1, raw_id=1972, raw_ver=1 ,hw_plat=8, hw_plat_ver=65536
  136. [ 0.043461] accessory_chip=0,hw_plat_subtype=0, pmic_model=65537, pmic_die_revision=196609,foundry_id=1
  137. [ 0.043744] msm_8974_init_gpiomux:2321 socinfo_get_version 10001
  138. [ 0.059741] gpiochip_add: registered GPIOs 0 to 145 on device: msmgpio
  139. [ 0.079352] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
  140. [ 0.081282] ------------[ cut here ]------------
  141. [ 0.081317] WARNING: at /media/feifei/linux/ubuntu/kernel/xiaomi/cancro/fs/sysfs/dir.c:508 sysfs_add_one+0x84/0xa4()
  142. [ 0.081347] sysfs: cannot create duplicate filename '/devices/qcrypto.0'
  143. [ 0.081366] Modules linked in:
  144. [ 0.081385] Backtrace:
  145. [ 0.081417] [<c010a72c>] (dump_backtrace+0x0/0x104) from [<c09f8b48>] (dump_stack+0x18/0x1c)
  146. [ 0.081443] r6:c02b4954 r5:00000009 r4:f0469d30 r3:271ae91c
  147. [ 0.081492] [<c09f8b30>] (dump_stack+0x0/0x1c) from [<c0197df4>] (warn_slowpath_common+0x54/0x6c)
  148. [ 0.081527] [<c0197da0>] (warn_slowpath_common+0x0/0x6c) from [<c0197e44>] (warn_slowpath_fmt+0x38/0x40)
  149. [ 0.081553] r8:00000000 r7:f0469d70 r6:f0587180 r5:ffffffef r4:f0431000
  150. [ 0.081590] r3:00000009
  151. [ 0.081618] [<c0197e0c>] (warn_slowpath_fmt+0x0/0x40) from [<c02b4954>] (sysfs_add_one+0x84/0xa4)
  152. [ 0.081644] r3:f0431000 r2:c0f58660
  153. [ 0.081676] [<c02b48d0>] (sysfs_add_one+0x0/0xa4) from [<c02b4b34>] (create_dir+0x64/0xc4)
  154. [ 0.081701] r7:00000001 r6:f059d410 r5:f0448bc0 r4:f0587180
  155. [ 0.081745] [<c02b4ad0>] (create_dir+0x0/0xc4) from [<c02b4f1c>] (sysfs_create_dir+0xc8/0xe8)
  156. [ 0.081770] r8:00000000 r7:00000000 r6:00000000 r5:f0448bc0 r4:f059d410
  157. [ 0.081823] [<c02b4e54>] (sysfs_create_dir+0x0/0xe8) from [<c0415ddc>] (kobject_add_internal+0x120/0x22c)
  158. [ 0.081849] r6:00000000 r5:f0448b0c r4:f059d410
  159. [ 0.081886] [<c0415cbc>] (kobject_add_internal+0x0/0x22c) from [<c0416160>] (kobject_add+0x78/0x90)
  160. [ 0.081911] r8:00000000 r7:00000000 r6:00000000 r5:00000000 r4:f059d410
  161. [ 0.081963] [<c04160e8>] (kobject_add+0x0/0x90) from [<c04ee8d8>] (device_add+0x11c/0x5cc)
  162. [ 0.081988] r3:00000000 r2:00000000
  163. [ 0.082011] r6:f059d410 r5:00000000 r4:f059d408
  164. [ 0.082056] [<c04ee7bc>] (device_add+0x0/0x5cc) from [<c07558a0>] (of_device_add+0x3c/0x40)
  165. [ 0.082093] [<c0755864>] (of_device_add+0x0/0x40) from [<c0755efc>] (of_platform_device_create_pdata+0x60/0x80)
  166. [ 0.082133] [<c0755e9c>] (of_platform_device_create_pdata+0x0/0x80) from [<c0756070>] (of_platform_bus_create+0x138/0x1e8)
  167. [ 0.082162] r7:c1201b6c r6:00000000 r5:00000000 r4:ce23bc9c
  168. [ 0.082240] [<c0755f38>] (of_platform_bus_create+0x0/0x1e8) from [<c07562a0>] (of_platform_populate+0x6c/0x98)
  169. [ 0.082282] [<c0756234>] (of_platform_populate+0x0/0x98) from [<c1108aa0>] (board_dt_populate+0x40/0x4c)
  170. [ 0.082309] r9:00000000 r8:c12fa340 r7:c1103690 r6:c1209b9c r5:c1201b6c
  171. [ 0.082346] r4:c0baba14
  172. [ 0.082377] [<c1108a60>] (board_dt_populate+0x0/0x4c) from [<c110bae0>] (msm8974_init+0x34/0x48)
  173. [ 0.082403] r5:c1200904 r4:00000003
  174. [ 0.082441] [<c110baac>] (msm8974_init+0x0/0x48) from [<c11036b4>] (customize_machine+0x24/0x30)
  175. [ 0.082478] [<c1103690>] (customize_machine+0x0/0x30) from [<c0100604>] (do_one_initcall+0x98/0x15c)
  176. [ 0.082513] [<c010056c>] (do_one_initcall+0x0/0x15c) from [<c1100be4>] (kernel_init+0x104/0x1bc)
  177. [ 0.082552] [<c1100ae0>] (kernel_init+0x0/0x1bc) from [<c019bd5c>] (do_exit+0x0/0x7e0)
  178. [ 0.082576] r9:00000000 r8:00000000 r7:00000013 r6:c019bd5c r5:c1100ae0
  179. [ 0.082613] r4:00000000
  180. [ 0.082633] ---[ end trace da227214a82491b8 ]---
  181. [ 0.082655] ------------[ cut here ]------------
  182. [ 0.082677] WARNING: at /media/feifei/linux/ubuntu/kernel/xiaomi/cancro/lib/kobject.c:198 kobject_add_internal+0x1b8/0x22c()
  183. [ 0.082708] kobject_add_internal failed for qcrypto.0 with -EEXIST, don't try to register things with the same name in the same directory.
  184. [ 0.082738] Modules linked in:
  185. [ 0.082755] Backtrace:
  186. [ 0.082779] [<c010a72c>] (dump_backtrace+0x0/0x104) from [<c09f8b48>] (dump_stack+0x18/0x1c)
  187. [ 0.082805] r6:c0415e74 r5:00000009 r4:f0469db0 r3:271ae91c
  188. [ 0.082850] [<c09f8b30>] (dump_stack+0x0/0x1c) from [<c0197df4>] (warn_slowpath_common+0x54/0x6c)
  189. [ 0.082884] [<c0197da0>] (warn_slowpath_common+0x0/0x6c) from [<c0197e44>] (warn_slowpath_fmt+0x38/0x40)
  190. [ 0.082911] r8:00000000 r7:00000000 r6:ffffffef r5:f0448b0c r4:f059d410
  191. [ 0.082948] r3:00000009
  192. [ 0.082975] [<c0197e0c>] (warn_slowpath_fmt+0x0/0x40) from [<c0415e74>] (kobject_add_internal+0x1b8/0x22c)
  193. [ 0.083003] r3:c0b6ee15 r2:c0f7ffb6
  194. [ 0.083033] [<c0415cbc>] (kobject_add_internal+0x0/0x22c) from [<c0416160>] (kobject_add+0x78/0x90)
  195. [ 0.083059] r8:00000000 r7:00000000 r6:00000000 r5:00000000 r4:f059d410
  196. [ 0.083108] [<c04160e8>] (kobject_add+0x0/0x90) from [<c04ee8d8>] (device_add+0x11c/0x5cc)
  197. [ 0.083133] r3:00000000 r2:00000000
  198. [ 0.083156] r6:f059d410 r5:00000000 r4:f059d408
  199. [ 0.083196] [<c04ee7bc>] (device_add+0x0/0x5cc) from [<c07558a0>] (of_device_add+0x3c/0x40)
  200. [ 0.083232] [<c0755864>] (of_device_add+0x0/0x40) from [<c0755efc>] (of_platform_device_create_pdata+0x60/0x80)
  201. [ 0.083272] [<c0755e9c>] (of_platform_device_create_pdata+0x0/0x80) from [<c0756070>] (of_platform_bus_create+0x138/0x1e8)
  202. [ 0.083301] r7:c1201b6c r6:00000000 r5:00000000 r4:ce23bc9c
  203. [ 0.083349] [<c0755f38>] (of_platform_bus_create+0x0/0x1e8) from [<c07562a0>] (of_platform_populate+0x6c/0x98)
  204. [ 0.083387] [<c0756234>] (of_platform_populate+0x0/0x98) from [<c1108aa0>] (board_dt_populate+0x40/0x4c)
  205. [ 0.083414] r9:00000000 r8:c12fa340 r7:c1103690 r6:c1209b9c r5:c1201b6c
  206. [ 0.083451] r4:c0baba14
  207. [ 0.083480] [<c1108a60>] (board_dt_populate+0x0/0x4c) from [<c110bae0>] (msm8974_init+0x34/0x48)
  208. [ 0.083505] r5:c1200904 r4:00000003
  209. [ 0.083540] [<c110baac>] (msm8974_init+0x0/0x48) from [<c11036b4>] (customize_machine+0x24/0x30)
  210. [ 0.083575] [<c1103690>] (customize_machine+0x0/0x30) from [<c0100604>] (do_one_initcall+0x98/0x15c)
  211. [ 0.083609] [<c010056c>] (do_one_initcall+0x0/0x15c) from [<c1100be4>] (kernel_init+0x104/0x1bc)
  212. [ 0.083646] [<c1100ae0>] (kernel_init+0x0/0x1bc) from [<c019bd5c>] (do_exit+0x0/0x7e0)
  213. [ 0.083670] r9:00000000 r8:00000000 r7:00000013 r6:c019bd5c r5:c1100ae0
  214. [ 0.083706] r4:00000000
  215. [ 0.083726] ---[ end trace da227214a82491b9 ]---
  216. [ 0.102114] 8841_s1: 675 <--> 1050 mV at 0 mV normal idle
  217. [ 0.102541] 8841_s1_ao: 675 <--> 1050 mV at 0 mV normal idle
  218. [ 0.102921] 8841_s1_so: 675 <--> 1050 mV at 675 mV normal idle
  219. [ 0.103338] 8841_s2: 500 <--> 1050 mV at 0 mV normal idle
  220. [ 0.103723] 8841_s2_corner: 0 <--> 0 mV at 0 mV normal idle
  221. [ 0.104119] 8841_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
  222. [ 0.104518] 8841_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle
  223. [ 0.104914] 8841_s3: 1050 mV normal idle
  224. [ 0.105314] 8841_s4: 815 <--> 900 mV at 0 mV normal idle
  225. [ 0.105683] 8841_s4_corner: 0 <--> 0 mV at 0 mV normal idle
  226. [ 0.106066] 8841_s4_floor_corner: 0 <--> 0 mV at 0 mV normal idle
  227. [ 0.106458] 8941_s1: 1300 mV normal idle
  228. [ 0.106883] 8941_s2: 2150 mV normal idle
  229. [ 0.107272] 8941_s3: 1800 mV normal idle
  230. [ 0.107683] 8941_l1: 1225 mV normal idle
  231. [ 0.108352] 8941_l2: 1200 mV normal idle
  232. [ 0.109104] 8941_l3: 1050 <--> 1225 mV at 1225 mV normal idle
  233. [ 0.109519] 8941_l4: 1225 mV normal idle
  234. [ 0.109909] 8941_l5: 1800 mV normal idle
  235. [ 0.110321] 8941_l6: 1800 mV normal idle
  236. [ 0.110723] 8941_l7: 1800 mV normal idle
  237. [ 0.111128] 8941_l8: 1800 mV normal idle
  238. [ 0.111541] 8941_l9: 1800 <--> 2950 mV at 2950 mV normal idle
  239. [ 0.111940] 8941_l10: 1800 <--> 2950 mV at 2950 mV normal idle
  240. [ 0.112389] 8941_l11: 1225 <--> 1350 mV at 1300 mV normal idle
  241. [ 0.112962] 8941_l12: 1800 mV normal idle
  242. [ 0.113350] 8941_l12_ao: 1800 mV normal idle
  243. [ 0.113759] 8941_l13: 1800 <--> 2950 mV at 2950 mV normal idle
  244. [ 0.114181] 8941_l14: 1800 mV normal idle
  245. [ 0.114593] 8941_l15: 2050 mV normal idle
  246. [ 0.114996] 8941_l16: 2700 mV normal idle
  247. [ 0.115407] 8941_l17: 2800 <--> 2950 mV at 2850 mV normal idle
  248. [ 0.115815] 8941_l18: 2850 mV normal idle
  249. [ 0.116231] 8941_l19: 2900 <--> 3350 mV at 2900 mV normal idle
  250. [ 0.116660] 8941_l20: 2950 mV normal idle
  251. [ 0.117064] 8941_l21: 2950 mV normal idle
  252. [ 0.117472] 8941_l22: 3000 mV normal idle
  253. [ 0.117880] 8941_l23: 3000 mV normal idle
  254. [ 0.118285] 8941_l24: 3075 mV normal idle
  255. [ 0.118674] 8941_lvs1:
  256. [ 0.119031] 8941_lvs2:
  257. [ 0.119379] 8941_lvs3:
  258. [ 0.121696] PDN krait_pdn_phase_scaling_init: eFuse phase scaling factor = 4/4 (eFuse not blown)
  259. [ 0.121727] PDN krait_pdn_phase_scaling_init: initial phase scaling factor = 4/4
  260. [ 0.122042] krait0: 500 <--> 1120 mV at 900 mV fast normal idle
  261. [ 0.122516] krait1: 500 <--> 1120 mV at 900 mV fast normal idle
  262. [ 0.122966] krait2: 500 <--> 1120 mV at 900 mV fast normal idle
  263. [ 0.123399] krait3: 500 <--> 1120 mV at 900 mV fast normal idle
  264. [ 0.151713] msm-thermal qcom,msm-thermal.81: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
  265. [ 0.152540] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
  266. [ 0.152573] msm-thermal qcom,msm-thermal.81: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qti,pmic-opt-curr-temp. KTM continues
  267. [ 0.152834] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
  268. [ 0.153276] persistent_ram: no valid data in buffer (sig = 0x00000000)
  269. [ 0.153694] console [ram-1] enabled
  270. [ 0.153742] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  271. [ 0.153770] hw-breakpoint: maximum watchpoint size is 8 bytes.
  272. [ 0.154484] msm-jtag-fuse fc4be024.jtagfuse: JTag Fuse initialized
  273. [ 0.156166] clock-krait-8974 f9016000.qcom,clock-krait: PVS config version: 1
  274. [ 0.156208] clock-krait-8974 f9016000.qcom,clock-krait: Speed bin: 3
  275. [ 0.156235] clock-krait-8974 f9016000.qcom,clock-krait: PVS bin: 4
  276. [ 0.156257] clock-krait-8974 f9016000.qcom,clock-krait: PVS version: 1
  277. [ 0.158934] L2 @ 729600 KHz
  278. [ 0.159114] CPU0 @ 960000 KHz
  279. [ 0.159131] CPU1 @ unknown rate. Forcing new rate.
  280. [ 0.159239] CPU1 @ 300000 KHz
  281. [ 0.159256] CPU2 @ unknown rate. Forcing new rate.
  282. [ 0.159360] CPU2 @ 300000 KHz
  283. [ 0.159377] CPU3 @ unknown rate. Forcing new rate.
  284. [ 0.159483] CPU3 @ 300000 KHz
  285. [ 0.165331] 8941_boost: 5000 mV
  286. [ 0.166300] 8941_mvs1:
  287. [ 0.166464] qcom,qpnp-regulator qpnp-regulator-f0574400: Failed to find supply parent
  288. [ 0.166830] spmi qpnp-regulator-f0574400: Driver qcom,qpnp-regulator requests probe deferral
  289. [ 0.167529] 8941_mvs2:
  290. [ 0.167662] 8941_mvs2: supplied by 8941_boost
  291. [ 0.179021] sps:BAM 0xf9984000 (va:0xc5d60000) enabled: ver:0x6, number of pipes:20
  292. [ 0.179108] sps:BAM 0xf9984000 is registered.
  293. [ 0.179166] sps:sps is ready.
  294. [ 0.181478] spmi qpnp-bsi-f0572800: Driver qcom,qpnp-bsi requests probe deferral
  295. [ 0.185414] gdsc_venus:
  296. [ 0.186107] gdsc_mdss:
  297. [ 0.186839] gdsc_jpeg:
  298. [ 0.187715] gdsc_vfe:
  299. [ 0.188395] gdsc_oxili_gx:
  300. [ 0.188570] gdsc_oxili_gx: supplied by 8841_s4_corner
  301. [ 0.189256] gdsc_oxili_cx:
  302. [ 0.189871] gdsc_usb_hsic:
  303. [ 0.191275] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  304. [ 0.205393] msm_ocmem fdd00000.qcom,ocmem: OCMEM Virtual addr c5e00000
  305. [ 0.206677] Physical OCMEM zone layout:
  306. [ 0.206745] zone graphics : 0xfec00000 - 0xfecfffff (1024 KB)
  307. [ 0.206817] zone lp_audio : 0xfed00000 - 0xfed7ffff ( 512 KB)
  308. [ 0.206888] zone video : 0xfed00000 - 0xfed7ffff ( 512 KB)
  309. [ 0.221822] bio: create slab <bio-0> at 0
  310. [ 0.222396] ethernet_phy:
  311. [ 0.222602] vsp:
  312. [ 0.222780] vsn:
  313. [ 0.223322] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
  314. [ 0.223387] ION-heap mm: Cannot specify alignment for this type of heap
  315. [ 0.223443] cma: Assigned CMA region at 0 to 16.qcom,ion-heap device
  316. [ 0.223502] ION-heap adsp: Cannot specify alignment for this type of heap
  317. [ 0.223569] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
  318. [ 0.223990] ION heap system created
  319. [ 0.224083] ION heap kmalloc created
  320. [ 0.224108] ION heap mm created at 0x6f800000 with size fc00000
  321. [ 0.224133] ION heap adsp created at 0x6b800000 with size 3f00000
  322. [ 0.224154] ION heap qsecom created at 0x6a400000 with size 1100000
  323. [ 0.224190] ION heap audio created at 0x7f700000 with size 614000
  324. [ 0.224213] ION heap pil_1 created at 0x05a00000 with size 2100000
  325. [ 0.224236] ION heap pil_2 created at 0x08000000 with size 5000000
  326. [ 0.225518] SCSI subsystem initialized
  327. [ 0.225609] usbcore: registered new interface driver usbfs
  328. [ 0.225663] usbcore: registered new interface driver hub
  329. [ 0.225754] usbcore: registered new device driver usb
  330. [ 0.226035] Linux media interface: v0.10
  331. [ 0.226070] Linux video capture interface: v2.00
  332. [ 0.228093] msm_iommu_v1 fda64000.qcom,iommu: device jpeg_iommu mapped at c5fa0000, with 3 ctx banks
  333. [ 0.229126] msm_iommu_v1 fd928000.qcom,iommu: device mdp_iommu mapped at c5fc0000, with 3 ctx banks
  334. [ 0.230592] msm_iommu_v1 fdc84000.qcom,iommu: device venus_iommu mapped at c5fe0000, with 5 ctx banks
  335. [ 0.231528] msm_iommu_v1 fdb10000.qcom,iommu: device kgsl_iommu mapped at c6000000, with 3 ctx banks
  336. [ 0.232448] msm_iommu_v1 fda44000.qcom,iommu: device vfe_iommu mapped at c6020000, with 3 ctx banks
  337. [ 0.233459] msm_iommu_ctx_v1 fda6c000.qcom,iommu-ctx: context jpeg_enc0 using bank 0
  338. [ 0.233568] msm_iommu_ctx_v1 fda6d000.qcom,iommu-ctx: context jpeg_enc1 using bank 1
  339. [ 0.233679] msm_iommu_ctx_v1 fda6e000.qcom,iommu-ctx: context jpeg_dec using bank 2
  340. [ 0.233799] msm_iommu_ctx_v1 fd930000.qcom,iommu-ctx: context mdp_0 using bank 0
  341. [ 0.233913] msm_iommu_ctx_v1 fd931000.qcom,iommu-ctx: context mdp_1 using bank 1
  342. [ 0.234020] msm_iommu_ctx_v1 fd932000.qcom,iommu-ctx: context mdp_2 using bank 2
  343. [ 0.234135] msm_iommu_ctx_v1 fdc8c000.qcom,iommu-ctx: context venus_ns using bank 0
  344. [ 0.234252] msm_iommu_ctx_v1 fdc8d000.qcom,iommu-ctx: context venus_sec_bitstream using bank 1
  345. [ 0.234358] msm_iommu_ctx_v1 fdc8e000.qcom,iommu-ctx: context venus_fw using bank 2
  346. [ 0.234463] msm_iommu_ctx_v1 fdc8f000.qcom,iommu-ctx: context venus_sec_pixel using bank 3
  347. [ 0.234571] msm_iommu_ctx_v1 fdc90000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
  348. [ 0.234693] msm_iommu_ctx_v1 fdb18000.qcom,iommu-ctx: context gfx3d_user using bank 0
  349. [ 0.234798] msm_iommu_ctx_v1 fdb19000.qcom,iommu-ctx: context gfx3d_priv using bank 1
  350. [ 0.234907] msm_iommu_ctx_v1 fdb1a000.qcom,iommu-ctx: context gfx3d_spare using bank 2
  351. [ 0.235021] msm_iommu_ctx_v1 fda4c000.qcom,iommu-ctx: context vfe0 using bank 0
  352. [ 0.235126] msm_iommu_ctx_v1 fda4d000.qcom,iommu-ctx: context vfe1 using bank 1
  353. [ 0.235230] msm_iommu_ctx_v1 fda4e000.qcom,iommu-ctx: context cpp using bank 2
  354. [ 0.236707] Advanced Linux Sound Architecture Driver Version 1.0.25.
  355. [ 0.237031] Bluetooth: Core ver 2.16
  356. [ 0.237068] NET: Registered protocol family 31
  357. [ 0.237080] Bluetooth: HCI device and connection manager initialized
  358. [ 0.237093] Bluetooth: HCI socket layer initialized
  359. [ 0.237104] Bluetooth: L2CAP socket layer initialized
  360. [ 0.237279] Bluetooth: SCO socket layer initialized
  361. [ 0.237455] cfg80211: Calling CRDA to update world regulatory domain
  362. [ 0.237484] cfg80211: World regulatory domain updated:
  363. [ 0.237496] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  364. [ 0.237510] cfg80211: (2402000 KHz - 2472000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  365. [ 0.237523] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  366. [ 0.237536] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  367. [ 0.237549] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  368. [ 0.237561] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  369. [ 0.237574] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  370. [ 0.237587] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  371. [ 0.237600] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
  372. [ 0.237691] NetLabel: Initializing
  373. [ 0.237702] NetLabel: domain hash size = 128
  374. [ 0.237711] NetLabel: protocols = UNLABELED CIPSOv4
  375. [ 0.237746] NetLabel: unlabeled traffic allowed by default
  376. [ 0.237855] nfc: nfc_init: NFC Core ver 0.1
  377. [ 0.237894] NET: Registered protocol family 39
  378. [ 0.238260] Switching to clocksource arch_sys_counter
  379. [ 0.252985] AppArmor: AppArmor Filesystem Enabled
  380. [ 0.258565] NET: Registered protocol family 2
  381. [ 0.258728] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  382. [ 0.259195] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  383. [ 0.260634] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  384. [ 0.261328] TCP: Hash tables configured (established 131072 bind 65536)
  385. [ 0.261344] TCP: reno registered
  386. [ 0.261359] UDP hash table entries: 512 (order: 2, 16384 bytes)
  387. [ 0.261416] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  388. [ 0.261674] NET: Registered protocol family 1
  389. [ 0.261933] Trying to unpack rootfs image as initramfs...
  390. [ 0.391568] Freeing initrd memory: 4472K
  391. [ 0.395497] Detected 9 counters on the L2CC PMU.
  392. [ 0.396765] gpiochip_find_base: found new base at 992
  393. [ 0.396850] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
  394. [ 0.397118] gpiochip_find_base: found new base at 960
  395. [ 0.397166] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
  396. [ 0.397201] gpiochip_find_base: found new base at 928
  397. [ 0.397252] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
  398. [ 0.397516] gpiochip_find_base: found new base at 896
  399. [ 0.397563] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
  400. [ 0.397597] gpiochip_find_base: found new base at 864
  401. [ 0.397644] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
  402. [ 0.397915] gpiochip_find_base: found new base at 832
  403. [ 0.397966] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
  404. [ 0.398032] gpiochip_find_base: found new base at 800
  405. [ 0.398079] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
  406. [ 0.398406] gpiochip_find_base: found new base at 768
  407. [ 0.398458] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
  408. [ 0.398493] gpiochip_find_base: found new base at 736
  409. [ 0.398540] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
  410. [ 0.398821] gpiochip_find_base: found new base at 704
  411. [ 0.398873] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
  412. [ 0.398926] gpiochip_find_base: found new base at 672
  413. [ 0.398977] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
  414. [ 0.399261] gpiochip_find_base: found new base at 640
  415. [ 0.399312] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
  416. [ 0.399345] gpiochip_find_base: found new base at 608
  417. [ 0.399393] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
  418. [ 0.399683] gpiochip_find_base: found new base at 576
  419. [ 0.399731] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
  420. [ 0.399796] gpiochip_find_base: found new base at 544
  421. [ 0.399844] gpiochip_add: registered GPIOs 544 to 575 on device: rdbg
  422. [ 0.400147] gpiochip_find_base: found new base at 512
  423. [ 0.400195] gpiochip_add: registered GPIOs 512 to 543 on device: rdbg
  424. [ 0.400232] gpiochip_find_base: found new base at 480
  425. [ 0.400283] gpiochip_add: registered GPIOs 480 to 511 on device: rdbg
  426. [ 0.400589] gpiochip_find_base: found new base at 448
  427. [ 0.400638] gpiochip_add: registered GPIOs 448 to 479 on device: rdbg
  428. [ 0.401945] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
  429. [ 0.404964] pil_pronto fb21b000.qcom,pronto: using secure boot
  430. [ 0.406342] pil_venus fdce0000.qcom,venus: using secure boot
  431. [ 0.408364] msm_thermal:do_core_control Set Offline: CPU3 Temp: 84
  432. [ 0.412526] msm_thermal:do_freq_control Limiting CPU0 max frequency to 1958400. Temp:84
  433. [ 0.412641] msm_thermal:do_freq_control Limiting CPU1 max frequency to 1958400. Temp:84
  434. [ 0.412712] msm_thermal:do_freq_control Limiting CPU2 max frequency to 1958400. Temp:84
  435. [ 0.412783] msm_thermal:do_freq_control Limiting CPU3 max frequency to 1958400. Temp:84
  436. [ 0.417255] NET: Registered protocol family 27
  437. [ 0.424956] msm_rpm_log_probe: OK
  438. [ 0.429259] mpm_counter: [ 0.429254]:(146373)
  439. [ 0.429748] audit: initializing netlink socket (disabled)
  440. [ 0.429791] type=2000 audit(0.420:1): initialized
  441. [ 0.430648] highmem bounce pool size: 64 pages
  442. [ 0.434775] exFAT: Version 1.2.8
  443. [ 0.434851] fuse init (API version 7.18)
  444. [ 0.435032] msgmni has been set to 1200
  445. [ 0.436953] NET: Registered protocol family 38
  446. [ 0.437066] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  447. [ 0.437085] io scheduler noop registered
  448. [ 0.437097] io scheduler deadline registered (default)
  449. [ 0.437118] io scheduler row registered
  450. [ 0.437202] io scheduler cfq registered
  451. [ 0.437216] io scheduler test-iosched registered
  452. [ 0.437238] io scheduler fiops registered
  453. [ 0.437327] io scheduler bfq registered
  454. [ 0.437340] BFQ I/O-scheduler: v7r8
  455. [ 0.437495] gpiochip_find_base: found new base at 444
  456. [ 0.437565] gpiochip_add: registered GPIOs 444 to 447 on device: pm8841-mpp
  457. [ 0.437796] qcom,qpnp-pin qpnp-pin-f0571c00: qpnp_pin_probe: gpio_chip registered between 444-447
  458. [ 0.438591] gpiochip_find_base: found new base at 408
  459. [ 0.438653] gpiochip_add: registered GPIOs 408 to 443 on device: pm8941-gpio
  460. [ 0.439720] qcom,qpnp-pin qpnp-pin-f0573600: qpnp_pin_probe: gpio_chip registered between 408-443
  461. [ 0.441727] gpiochip_find_base: found new base at 401
  462. [ 0.441787] gpiochip_add: registered GPIOs 401 to 407 on device: pm8941-mpp
  463. [ 0.442184] qcom,qpnp-pin qpnp-pin-f0573800: qpnp_pin_probe: gpio_chip registered between 401-407
  464. [ 0.442783] mdss_mdp_probe: MDP HW Base phy_Address=0xfd900000 virt=0xc6040000
  465. [ 0.442829] mdss_mdp_probe: MDSS VBIF HW Base phy_Address=0xfd924000 virt=0xc5ff6000
  466. [ 0.443157] mdss_mdp_parse_bootarg: mdss_mdp_parse_bootarg:1509: pan_name=[1:dsi:0:qcom,mdss_dsi_jdi_fhd_cmd_95] end=[ty]
  467. [ 0.445046] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
  468. [ 0.445155] mdss_dsi_panel_init: Panel Name = jdi fhd cmd mode dsi panel
  469. [ 0.445173] panel_id 5
  470. [ 0.445360] mdss_dsi_panel_init:1315 Continuous splash flag enabled.
  471. [ 0.445378] mdss_dsi_panel_init:1327 Partial update disabled.
  472. [ 0.445394] mdss_dsi_panel_init: sleep power mode 0
  473. [ 0.445933] dsi_panel_device_register:1346, Disp_en gpio not specified
  474. [ 0.446044] mdss_dsi_retrieve_ctrl_resources: dsi base=c5ffa800 size=600
  475. [ 0.446549] mdss_dsi_panel_power_on: enable=1
  476. [ 0.446564] mdss_dsi_panel_pon: Need not pon
  477. [ 0.528601] mdss_register_panel: adding framebuffer device fd922800.qcom,mdss_dsi
  478. [ 0.528880] mdss_hw_init: MDP Rev=10020001
  479. [ 0.529668] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
  480. [ 0.529725] controller config is not present
  481. [ 0.529740] mdss_dsi_pref_prim_panel:can't find panel phandle
  482. [ 0.529752] mdss_dsi_ctrl_probe: can't find panel node 0:qcom,mdss_dsi_jdi_fhd_cmd_95
  483. [ 0.529786] mdss_dsi_ctrl: probe of fd922e00.qcom,mdss_dsi failed with error 30
  484. [ 0.531054] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.5
  485. [ 0.532016] mdss_fb_parse_dt: split framebuffer left=0 right=0
  486. [ 0.532164] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
  487. [ 0.532312] Registered led device: lcd-backlight
  488. [ 0.532354] mdss_fb_parse_dt: split framebuffer left=0 right=0
  489. [ 0.532472] mdss_fb_register: FrameBuffer[1] 1920x1080 registered successfully!
  490. [ 0.571210] sps: BAM device 0xf9944000 is not registered yet.
  491. [ 0.571259] sps:BAM 0xf9944000 is registered.
  492. [ 0.574181] f995d000.uart: ttyHS0 at MMIO 0xf995d000 (irq = 145) is a MSM HS UART
  493. [ 0.576120] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
  494. [ 0.576242] f991e000.serial: ttyHSL0 at MMIO 0xf991e000 (irq = 140) is a MSM
  495. [ 0.579123] msm_serial_hsl_init: driver initialized
  496. [ 0.582999] diagchar initialized now
  497. [ 0.583977] kgsl: adreno_of_read_property: Unable to read 'qcom,pm-qos-latency'
  498. [ 0.585319] kgsl bus ib [0] = 2456000000
  499. [ 0.585336] kgsl bus ib [1] = 3680000000
  500. [ 0.585347] kgsl bus ib [2] = 4912000000
  501. [ 0.585358] kgsl bus ib [3] = 6400000000
  502. [ 0.585369] kgsl bus ib [4] = 7464000000
  503. [ 0.585380] kgsl bus index is 4 for pwrlevel 0
  504. [ 0.585391] kgsl bus index is 3 for pwrlevel 1
  505. [ 0.585402] kgsl bus index is 2 for pwrlevel 2
  506. [ 0.585412] kgsl bus index is 1 for pwrlevel 3
  507. [ 0.585423] kgsl bus index is 0 for pwrlevel 4
  508. [ 0.586262] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
  509. [ 0.592922] brd: module loaded
  510. [ 0.594770] loop: module loaded
  511. [ 0.595234] QSEECOM: qseecom_probe: support_bus_scaling=0x1
  512. [ 0.595248] QSEECOM: qseecom_probe: bam_pipe_pair=0x2
  513. [ 0.595263] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
  514. [ 0.595278] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x1
  515. [ 0.595326] QSEECOM: qseecom_probe: secure app region addr=0x7b00000 size=0x500000
  516. [ 0.596362] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  517. [ 0.596381] i2c-core: driver [tabla-i2c-core] using legacy resume method
  518. [ 0.596470] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
  519. [ 0.596485] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
  520. [ 0.596908] SCSI Media Changer driver v0.25
  521. [ 0.597807] sps:BAM 0xf9944000 (va:0xc6080000) enabled: ver:0x13, number of pipes:24
  522. [ 0.598117] spi_qsd f9966000.spi: master is unqueued, this is deprecated
  523. [ 0.602207] gpio_request: gpio-56 (spi_clk) status -16
  524. [ 0.602216] spi_qsd f9966000.spi: msm_spi_request_gpios: gpio_request for pin 56 failed with error -16
  525. [ 0.602241] spi_qsd f9966000.spi: can't setup spi7.0, status -16
  526. [ 0.602255] spi_master spi7: spi_device register error /soc/spi@f9966000/epm-adc@0
  527. [ 0.603114] tun: Universal TUN/TAP device driver, 1.6
  528. [ 0.603132] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  529. [ 0.603261] rmnet_init: BAM devices[9]
  530. [ 0.607021] PPP generic driver version 2.4.2
  531. [ 0.607183] PPP BSD Compression module registered
  532. [ 0.607198] PPP Deflate Compression module registered
  533. [ 0.613900] PPP MPPE Compression module registered
  534. [ 0.613918] NET: Registered protocol family 24
  535. [ 0.613933] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  536. [ 0.613949] CSLIP: code copyright 1989 Regents of the University of California.
  537. [ 0.614349] wcnss_wlan probed in built-in mode
  538. [ 0.615337] usbcore: registered new interface driver asix
  539. [ 0.615424] usbcore: registered new interface driver cdc_ether
  540. [ 0.615476] usbcore: registered new interface driver net1080
  541. [ 0.615524] usbcore: registered new interface driver cdc_subset
  542. [ 0.615570] usbcore: registered new interface driver zaurus
  543. [ 0.615714] usbcore: registered new interface driver cdc_ncm
  544. [ 0.658367] msm_thermal:do_core_control Set Offline: CPU2 Temp: 85
  545. [ 0.661580] msm_thermal:do_freq_control Limiting CPU0 max frequency to 1574400. Temp:85
  546. [ 0.661706] msm_thermal:do_freq_control Limiting CPU1 max frequency to 1574400. Temp:85
  547. [ 0.661779] msm_thermal:do_freq_control Limiting CPU2 max frequency to 1574400. Temp:85
  548. [ 0.661799] msm_thermal:do_freq_control Limiting CPU3 max frequency to 1574400. Temp:85
  549. [ 0.873094] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  550. [ 0.874675] usbcore: registered new interface driver cdc_acm
  551. [ 0.874693] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  552. [ 0.874710] Initializing USB Mass Storage driver...
  553. [ 0.874770] usbcore: registered new interface driver usb-storage
  554. [ 0.874786] USB Mass Storage support registered.
  555. [ 0.874830] usbcore: registered new interface driver ums-alauda
  556. [ 0.874878] usbcore: registered new interface driver ums-cypress
  557. [ 0.874927] usbcore: registered new interface driver ums-datafab
  558. [ 0.874975] usbcore: registered new interface driver ums_eneub6250
  559. [ 0.875023] usbcore: registered new interface driver ums-freecom
  560. [ 0.875071] usbcore: registered new interface driver ums-isd200
  561. [ 0.875124] usbcore: registered new interface driver ums-jumpshot
  562. [ 0.875172] usbcore: registered new interface driver ums-karma
  563. [ 0.875220] usbcore: registered new interface driver ums-onetouch
  564. [ 0.875270] usbcore: registered new interface driver ums-sddr09
  565. [ 0.875319] usbcore: registered new interface driver ums-sddr55
  566. [ 0.875367] usbcore: registered new interface driver ums-usbat
  567. [ 0.875420] usbcore: registered new interface driver usb_ehset_test
  568. [ 0.876157] mbim_init: initialize 1 instances
  569. [ 0.876270] mbim_init: Initialized 1 ports
  570. [ 0.877661] rndis_qc_init: initialize rndis QC instance
  571. [ 0.878000] gadget: Mass Storage Function, version: 2009/09/11
  572. [ 0.878019] gadget: Number of LUNs=1
  573. [ 0.878033] lun0: LUN: removable read only CD-ROM file: (no medium)
  574. [ 0.878285] gadget: android_usb ready
  575. [ 0.879726] mousedev: PS/2 mouse device common for all mice
  576. [ 0.880007] usbcore: registered new interface driver xpad
  577. [ 0.882035] using rtc device, qpnp_rtc, for alarms
  578. [ 0.882065] qcom,qpnp-rtc qpnp-rtc-f0573a00: rtc core: registered qpnp_rtc as rtc0
  579. [ 0.882297] i2c /dev entries driver
  580. [ 0.883992] ocmem: Notifier registered for 1
  581. [ 0.884107] msm_vidc: 1: Failed to read qcom,load-freq-tbl from device tree
  582. [ 0.884115] msm_vidc: 1: no elements in frequency table
  583. [ 0.884122] msm_vidc: 1: Failed to read qcom,reg-presets from device tree
  584. [ 0.884225] msm_vidc: 1: Failed to read qcom,buffer-type-tz-usage-table from device tree
  585. [ 0.884237] msm_vidc: 1: Q6 hfi device probe called
  586. [ 0.884532] msm_vidc: 1: debugfs_create_file: fail
  587. [ 0.891516] msm_actuator_platform_probe:1175 msm_actuator_platform_probe: succeeded:0
  588. [ 0.891649] msm_actuator_platform_probe:1175 msm_actuator_platform_probe: succeeded:0
  589. [ 0.891788] msm_actuator_platform_probe:1175 msm_actuator_platform_probe: succeeded:0
  590. [ 0.891831] msm_flash_lm3646_i2c_add_driver called
  591. [ 0.892459] Registered led device: torch-light
  592. [ 0.893881] imx214_init_module:310
  593. [ 0.908368] msm_thermal:do_core_control Set Offline: CPU1 Temp: 82
  594. [ 0.911404] msm_thermal:do_freq_control Limiting CPU0 max frequency to 1267200. Temp:82
  595. [ 0.911524] msm_thermal:do_freq_control Limiting CPU1 max frequency to 1267200. Temp:82
  596. [ 0.911547] msm_thermal:do_freq_control Limiting CPU2 max frequency to 1267200. Temp:82
  597. [ 0.911569] msm_thermal:do_freq_control Limiting CPU3 max frequency to 1267200. Temp:82
  598. [ 0.940678] msm_cci_irq:854 MASTER_0 error 10000000
  599. [ 0.940727] msm_cci_i2c_read:428 read_words = 0, exp words = 1
  600. [ 0.940747] msm_cci_i2c_read_bytes:506 failed rc -22
  601. [ 0.940764] msm_camera_cci_i2c_read: line 53 rc = -22
  602. [ 0.940779] imx214_match_id: imx214: read id failed
  603. [ 0.940796] imx214_match_id: read id: 0 expected id: 214
  604. [ 0.940811] msm_sensor_match_id chip id doesnot match
  605. [ 0.940825] msm_sensor_check_id:1070 match id failed rc -19
  606. [ 0.988831] msm_sensor_platform_probe imx214 power up failed
  607. [ 0.988918] imx214_init_module:315 rc -19
  608. [ 0.988987] s5k3m2_init_module:227
  609. [ 1.040682] s5k3m2_match_id: read id: 30d2 expected id: 30d2
  610. [ 1.058869] s5k3m2_match_id OTP0:0x0d03
  611. [ 1.059080] s5k3m2_match_id OTP0:0x0000
  612. [ 1.059295] s5k3m2_match_id OTP0:0x0000
  613. [ 1.059509] s5k3m2_match_id OTP0:0x0d11
  614. [ 1.059918] s5k3m2_match_id inf:197 marco:510
  615. [ 1.108382] imx219_init_module:124
  616. [ 1.158379] msm_thermal:do_freq_control Limiting CPU0 max frequency to 1036800. Temp:79
  617. [ 1.158475] msm_thermal:do_freq_control Limiting CPU1 max frequency to 1036800. Temp:79
  618. [ 1.158504] msm_thermal:do_freq_control Limiting CPU2 max frequency to 1036800. Temp:79
  619. [ 1.158529] msm_thermal:do_freq_control Limiting CPU3 max frequency to 1036800. Temp:79
  620. [ 1.194397] imx135_init_module:246
  621. [ 1.195053] imx135_init_module:251 rc -19
  622. [ 1.195118] imx132_init_module:136
  623. [ 1.195741] imx132_init_module:141 rc -19
  624. [ 1.195803] ov4688_init_module:342
  625. [ 1.196424] ov4688_init_module:347 rc -19
  626. [ 1.198663] __msm_jpeg_init:951] Jpeg Device id 0
  627. [ 1.198933] __msm_jpeg_init:951] Jpeg Device id 1
  628. [ 1.199181] __msm_jpeg_init:951] Jpeg Device id 2
  629. [ 1.217694] lirc_dev: IR Remote Control driver registered, major 233
  630. [ 1.217725] IR NEC protocol handler initialized
  631. [ 1.217743] IR RC5(x) protocol handler initialized
  632. [ 1.217760] IR RC6 protocol handler initialized
  633. [ 1.217777] IR JVC protocol handler initialized
  634. [ 1.217794] IR Sony protocol handler initialized
  635. [ 1.217811] IR RC5 (streamzap) protocol handler initialized
  636. [ 1.217830] IR SANYO protocol handler initialized
  637. [ 1.217847] IR LIRC bridge handler initialized
  638. [ 1.217950] usbcore: registered new interface driver uvcvideo
  639. [ 1.217972] USB Video Class driver (1.1.1)
  640. [ 1.218904] bq28400_init: bq28400 driver rev 1.0.
  641. [ 1.218978] BMS: qpnp_bms_init: QPNP BMS INIT
  642. [ 1.219102] spmi qpnp-bms-f0572c00: Driver qcom,qpnp-bms requests probe deferral
  643. [ 1.219362] spmi qpnp-charger-f0573400: Driver qcom,qpnp-charger requests probe deferral
  644. [ 1.254638] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  645. [ 1.254779] device-mapper: req-crypt: dm-req-crypt successfully initalized.
  646.  
  647. [ 1.255958] cpuidle: using governor ladder
  648. [ 1.255980] cpuidle: using governor menu
  649. [ 1.256034] sdhci: Secure Digital Host Controller Interface driver
  650. [ 1.256054] sdhci: Copyright(c) Pierre Ossman
  651. [ 1.256747] sdhci-pltfm: SDHCI platform and OF driver helper
  652. [ 1.261146] mmc0: no vmmc regulator found
  653. [ 1.262278] Registered led device: mmc0::
  654. [ 1.264604] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
  655. [ 1.269043] mmc1: no vmmc regulator found
  656. [ 1.270143] Registered led device: mmc1::
  657. [ 1.271319] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
  658. [ 1.272832] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x1
  659. [ 1.272854] QCE50: __qce_get_device_tree_data: Fail to get CE device information.
  660. [ 1.272893] qce: probe of qcedev.0 failed with error -22
  661. [ 1.273559] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x2
  662. [ 1.273579] QCE50: __qce_get_device_tree_data: Fail to get CE device information.
  663. [ 1.273619] qcrypto: probe of qcrypto.0 failed with error -22
  664. [ 1.274437] usbcore: registered new interface driver usbhid
  665. [ 1.274461] usbhid: USB HID core driver
  666. [ 1.275048] ashmem: initialized
  667. [ 1.277072] sps:BAM 0xf9304000 is registered.
  668. [ 1.277123] sps:BAM 0xf9a44000 is registered.
  669. [ 1.277151] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
  670. [ 1.277790] input: qpnp_pon as /devices/virtual/input/input0
  671. [ 1.278977] qpnp_coincell_charger_show_state: enabled=Y, voltage=3000 mV, resistance=2100 ohm
  672. [ 1.280044] PMIC@SID4: PM8841 v2.1 options: 0, 0, 2, 2
  673. [ 1.280162] PMIC@SID0: PM8941 v3.1 options: 0, 0, 0, 0
  674. [ 1.280539] kraitbw-l2pm qcom,kraitbw-l2pm.51: BW HWmon governor registered.
  675. [ 1.281433] devfreq qcom,cpubw.50: Couldn't update frequency transition information.
  676. [ 1.303587] drv2604 probe succeeded
  677. [ 1.303699] drv2604: initialized on M3
  678. [ 1.328605] usbcore: registered new interface driver snd-usb-audio
  679. [ 1.330320] tpa6130a2 1-0060: probe from device tree mode: en-gpio=85
  680. [ 1.350514] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
  681. [ 1.351419] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
  682. [ 1.352653] platform qcom,msm-voip-dsp.60: Driver msm-voip-dsp requests probe deferral
  683. [ 1.353284] platform qcom,msm-pcm-voice.61: Driver msm-pcm-voice requests probe deferral
  684. [ 1.357148] ocmem: Notifier registered for 5
  685. [ 1.358093] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
  686. [ 1.358247] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
  687. [ 1.360007] oprofile: using arm/armv7-krait
  688. [ 1.360084] u32 classifier
  689. [ 1.360100] Actions configured
  690. [ 1.360120] Netfilter messages via NETLINK v0.30.
  691. [ 1.360146] nfnl_acct: registering with nfnetlink.
  692. [ 1.360265] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  693. [ 1.361826] ctnetlink v0.93: registering with nfnetlink.
  694. [ 1.361881] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  695. [ 1.361903] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  696. [ 1.362097] xt_time: kernel timezone is -0000
  697. [ 1.362622] ip_tables: (C) 2000-2006 Netfilter Core Team
  698. [ 1.362779] arp_tables: (C) 2002 David S. Miller
  699. [ 1.362839] TCP: cubic registered
  700. [ 1.362856] Initializing XFRM netlink socket
  701. [ 1.363185] NET: Registered protocol family 10
  702. [ 1.365497] Mobile IPv6
  703. [ 1.365539] ip6_tables: (C) 2000-2006 Netfilter Core Team
  704. [ 1.365707] IPv6 over IPv4 tunneling driver
  705. [ 1.366164] NET: Registered protocol family 17
  706. [ 1.366213] NET: Registered protocol family 15
  707. [ 1.366279] Bridge firewalling registered
  708. [ 1.366307] Ebtables v2.0 registered
  709. [ 1.366501] Bluetooth: RFCOMM TTY layer initialized
  710. [ 1.366532] Bluetooth: RFCOMM socket layer initialized
  711. [ 1.366550] Bluetooth: RFCOMM ver 1.11
  712. [ 1.366567] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  713. [ 1.366584] Bluetooth: BNEP filters: protocol multicast
  714. [ 1.366604] Registering the dns_resolver key type
  715. [ 1.367241] Registering SWP/SWPB emulation handler
  716. [ 1.383616] mmc0: BKOPS_EN bit = 0
  717. [ 1.408514] msm_thermal:do_freq_control Limiting CPU0 max frequency to 883200. Temp:76
  718. [ 1.408776] msm_thermal:do_freq_control Limiting CPU1 max frequency to 883200. Temp:76
  719. [ 1.408812] msm_thermal:do_freq_control Limiting CPU2 max frequency to 883200. Temp:76
  720. [ 1.408843] msm_thermal:do_freq_control Limiting CPU3 max frequency to 883200. Temp:76
  721. [ 1.411810] AppArmor: AppArmor sha1 policy hashing enabled
  722. [ 1.411914] ethernet_phy: disabling
  723. [ 1.411940] gdsc_oxili_gx: disabling
  724. [ 1.411972] gdsc_venus: disabling
  725. [ 1.413593] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
  726. [ 1.413843] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
  727. [ 1.417349] gpio_set_debounce: gpio-412 status -22
  728. [ 1.417687] gpio_set_debounce: gpio-80 status -22
  729. [ 1.417894] gpio_set_debounce: gpio-92 status -22
  730. [ 1.418295] input: gpio-keys as /devices/gpio_keys.96/input/input1
  731. [ 1.418571] qpnp_chg_vbatdet_set: voltage=4300 setting 35
  732. [ 1.419076] batfet:
  733. [ 1.419350] 8941_smbb_otg:
  734. [ 1.419426] 8941_smbb_otg: supplied by 8941_boost
  735. [ 1.419836] 8941_smbb_boost: 5000 mV
  736. [ 1.421663] atmel_mxt_ts_640t 2-004b: reset gpio= 60
  737. [ 1.421693] atmel_mxt_ts_640t 2-004b: irq gpio= 54
  738. [ 1.421715] atmel_mxt_ts_640t 2-004b: power gpio= 48
  739. [ 1.421737] atmel_mxt_ts_640t 2-004b: fw name = mxT640T10AA.fw
  740. [ 1.421761] atmel_mxt_ts_640t 2-004b: config size = 6
  741. [ 1.421784] atmel_mxt_ts_640t 2-004b: gpio mask = 0x1c
  742. [ 1.421807] atmel_mxt_ts_640t 2-004b: cut off power = 0
  743. [ 1.421831] atmel_mxt_ts_640t 2-004b: family_id = 0xa4
  744. [ 1.421853] atmel_mxt_ts_640t 2-004b: variant_id = 0x7
  745. [ 1.421876] atmel_mxt_ts_640t 2-004b: version = 0x5
  746. [ 1.421898] atmel_mxt_ts_640t 2-004b: build = 0x12
  747. [ 1.421920] atmel_mxt_ts_640t 2-004b: mxt_cfg_name = mxt_640t_config_revc.fw
  748. [ 1.421947] atmel_mxt_ts_640t 2-004b: vendor_id = 0x1c
  749. [ 1.421970] atmel_mxt_ts_640t 2-004b: rev_id = 0x22
  750. [ 1.421993] atmel_mxt_ts_640t 2-004b: wakeup self adcx = 0x0
  751. [ 1.422016] atmel_mxt_ts_640t 2-004b: family_id = 0xa4
  752. [ 1.422038] atmel_mxt_ts_640t 2-004b: variant_id = 0x7
  753. [ 1.422060] atmel_mxt_ts_640t 2-004b: version = 0x10
  754. [ 1.422083] atmel_mxt_ts_640t 2-004b: build = 0xaa
  755. [ 1.422104] atmel_mxt_ts_640t 2-004b: mxt_cfg_name = mxt_640t_config_revd.fw
  756. [ 1.422130] atmel_mxt_ts_640t 2-004b: vendor_id = 0x1c
  757. [ 1.422153] atmel_mxt_ts_640t 2-004b: rev_id = 0x32
  758. [ 1.422175] atmel_mxt_ts_640t 2-004b: wakeup self adcx = 0x10
  759. [ 1.422198] atmel_mxt_ts_640t 2-004b: family_id = 0xa4
  760. [ 1.422220] atmel_mxt_ts_640t 2-004b: variant_id = 0x7
  761. [ 1.422243] atmel_mxt_ts_640t 2-004b: version = 0x10
  762. [ 1.422265] atmel_mxt_ts_640t 2-004b: build = 0xaa
  763. [ 1.422286] atmel_mxt_ts_640t 2-004b: mxt_cfg_name = mxt_640t_config_revd.fw
  764. [ 1.422312] atmel_mxt_ts_640t 2-004b: vendor_id = 0x14
  765. [ 1.422335] atmel_mxt_ts_640t 2-004b: rev_id = 0x32
  766. [ 1.422357] atmel_mxt_ts_640t 2-004b: wakeup self adcx = 0x10
  767. [ 1.422380] atmel_mxt_ts_640t 2-004b: family_id = 0xa4
  768. [ 1.422402] atmel_mxt_ts_640t 2-004b: variant_id = 0x7
  769. [ 1.422424] atmel_mxt_ts_640t 2-004b: version = 0x10
  770. [ 1.422447] atmel_mxt_ts_640t 2-004b: build = 0xaa
  771. [ 1.422468] atmel_mxt_ts_640t 2-004b: mxt_cfg_name = mxt_640t_ofilm_config.fw
  772. [ 1.422494] atmel_mxt_ts_640t 2-004b: vendor_id = 0x18
  773. [ 1.422516] atmel_mxt_ts_640t 2-004b: rev_id = 0x32
  774. [ 1.422538] atmel_mxt_ts_640t 2-004b: wakeup self adcx = 0x10
  775. [ 1.422562] atmel_mxt_ts_640t 2-004b: family_id = 0xa4
  776. [ 1.422584] atmel_mxt_ts_640t 2-004b: variant_id = 0x7
  777. [ 1.422606] atmel_mxt_ts_640t 2-004b: version = 0x10
  778. [ 1.422628] atmel_mxt_ts_640t 2-004b: build = 0xaa
  779. [ 1.422649] atmel_mxt_ts_640t 2-004b: mxt_cfg_name = mxt_640t_biel_config.fw
  780. [ 1.422675] atmel_mxt_ts_640t 2-004b: vendor_id = 0xc
  781. [ 1.422698] atmel_mxt_ts_640t 2-004b: rev_id = 0x32
  782. [ 1.422719] atmel_mxt_ts_640t 2-004b: wakeup self adcx = 0x10
  783. [ 1.422743] atmel_mxt_ts_640t 2-004b: family_id = 0xa4
  784. [ 1.422765] atmel_mxt_ts_640t 2-004b: variant_id = 0x7
  785. [ 1.422787] atmel_mxt_ts_640t 2-004b: version = 0x10
  786. [ 1.422810] atmel_mxt_ts_640t 2-004b: build = 0xaa
  787. [ 1.422831] atmel_mxt_ts_640t 2-004b: mxt_cfg_name = mxt_640t_laibao_config.fw
  788. [ 1.422859] atmel_mxt_ts_640t 2-004b: vendor_id = 0x0
  789. [ 1.422882] atmel_mxt_ts_640t 2-004b: rev_id = 0x32
  790. [ 1.422904] atmel_mxt_ts_640t 2-004b: wakeup self adcx = 0x10
  791. [ 1.431462] qpnp_chg_idcmax_set: mA 1800
  792. [ 1.432441] qpnp_chg_bat_if_batt_temp_irq_handler: batt-temp triggered: 1
  793. [ 1.432861] qpnp_chg_usb_chg_gone_irq_handler: chg_gone triggered, usb 1 3
  794. [ 1.432913] qpnp_chg_usb_usbin_valid_irq_handler: usbin-valid triggered: 1 host_mode: 0
  795. [ 1.433042] qpnp_chg_dc_dcin_valid_irq_handler: dcin-valid triggered: 0
  796. [ 1.433101] 8941_boost: Failed to create debugfs directory
  797. [ 1.433137] 8941_smbb_boost: Failed to create debugfs directory
  798. [ 1.433205] qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 1, dc = 0 b_health = 1 batt_present = 1
  799. [ 1.437106] BMS: read_shutdown_soc: stored soc = 0x48, shutdown_soc = 35
  800. [ 1.450895] BMS: read_soc_params_raw: PON_OCV_UV = 3754809, cc = 2a468a
  801. [ 1.454782] mmc0: new HS400 MMC card at address 0001
  802. [ 1.455258] mmcblk0: mmc0:0001 SDW32G 29.1 GiB
  803. [ 1.455530] mmcblk0rpmb: mmc0:0001 SDW32G partition 3 4.00 MiB
  804. [ 1.457174] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25
  805. [ 1.463637] BMS: load_shutdown_data: calculated_soc = 25, valid_limit = 20
  806. [ 1.463807] BMS: setup_vbat_monitoring: set low thr to 3420000 and high to 4330000
  807. [ 1.464740] BMS: refresh_die_temp_monitor: low = 52438, high = 62438
  808. [ 1.477463] BMS: calculate_state_of_charge: soc = 25 before forcing shutdown_soc = 35
  809. [ 1.477504] BMS: calculate_state_of_charge: DONE for shutdown_soc = 35 soc is 35, adjusted ocv to 3784000uV
  810. [ 1.489148] BMS: adjust_soc: s 35 i 468090 v 3675360 ocv 3784000 rbatt 156 uuc 90090 cc 757 r 1111110 t 450 f 3003000
  811. [ 1.499122] BMS: qpnp_bms_probe: probe success: soc =35 vbatt = 3671791 ocv = 3784000 r_sense_uohm = 9718 warm_reset = 0
  812. [ 1.499692] qpnp_bsi_clear_bsi_error: PMIC BSI module in error state, error=5
  813. [ 1.505460] qup_i2c f9924000.i2c: QUP: I2C status flags :0xc1300c8, irq:128
  814. [ 1.505518] qup_i2c f9924000.i2c: I2C slave addr:0x4b not connected
  815. [ 1.505584] atmel_mxt_ts_640t 2-004b: mxt_read_reg: i2c transfer failed (-107)
  816. [ 1.505616] atmel_mxt_ts_640t 2-004b: Bootloader i2c addr: 0x27
  817. [ 1.505715] qup_i2c f9924000.i2c: QUP: I2C status flags :0xd1100c8, irq:128
  818. [ 1.505768] qup_i2c f9924000.i2c: I2C slave addr:0x27 not connected
  819. [ 1.505829] atmel_mxt_ts_640t 2-004b: mxt_probe_bootloader: i2c recv failed
  820. [ 1.505858] power gpio = 1
  821. [ 1.505876] reset gpio = 1
  822. [ 1.505893] chg gpio = 0
  823. [ 1.506315] atmel_mxt_ts_640t 2-004b: Family ID: 164 Variant ID: 7 Version: 1.0.AA Object Num: 39
  824. [ 1.509547] BMS: adjust_soc: s 35 i 483033 v 3674775 ocv 3784000 rbatt 156 uuc 90090 cc 758 r 1111110 t 450 f 3003000
  825. [ 1.518624] qcom,qpnp-bsi qpnp-bsi-f0572800: qpnp_bsi_wait_for_tx: transaction error occurred, BSI error=5
  826. [ 1.518776] qpnp_bsi_clear_bsi_error: PMIC BSI module in error state, error=5
  827. [ 1.519664] qcom,qpnp-bsi qpnp-bsi-f0572800: qpnp_bsi_wait_for_tx: transaction error occurred, BSI error=5
  828. [ 1.519699] bif_perform_uid_search: bus_transaction failed, rc=-5
  829. [ 1.519837] qpnp_bsi_clear_bsi_error: PMIC BSI module in error state, error=5
  830. [ 1.520097] qcom,qpnp-bsi qpnp-bsi-f0572800: qpnp_bsi_wait_for_tx: transaction error occurred, BSI error=5
  831. [ 1.520131] bif_perform_uid_search: bus_transaction failed, rc=-5
  832. [ 1.520269] qpnp_bsi_clear_bsi_error: PMIC BSI module in error state, error=5
  833. [ 1.520528] qcom,qpnp-bsi qpnp-bsi-f0572800: qpnp_bsi_wait_for_tx: transaction error occurred, BSI error=5
  834. [ 1.520562] bif_perform_uid_search: bus_transaction failed, rc=-5
  835. [ 1.520700] qpnp_bsi_clear_bsi_error: PMIC BSI module in error state, error=5
  836. [ 1.520960] qcom,qpnp-bsi qpnp-bsi-f0572800: qpnp_bsi_wait_for_tx: transaction error occurred, BSI error=5
  837. [ 1.520994] bif_perform_uid_search: bus_transaction failed, rc=-5
  838. [ 1.521131] qpnp_bsi_clear_bsi_error: PMIC BSI module in error state, error=5
  839. [ 1.521392] qcom,qpnp-bsi qpnp-bsi-f0572800: qpnp_bsi_wait_for_tx: transaction error occurred, BSI error=5
  840. [ 1.521426] bif_perform_uid_search: bus_transaction failed, rc=-5
  841. [ 1.521467] bif_ctrl_register: Battery pack present = Y
  842. [ 1.526791] qpnp_chg_vbatdet_set: voltage=4400 setting 3a
  843. [ 1.535420] bif_ctrl_register: Battery pack type = smart (Rid=255938 ohm)
  844. [ 1.535736] 8941_mvs1:
  845. [ 1.535802] 8941_mvs1: supplied by 8941_smbb_otg
  846. [ 1.536558] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
  847. [ 1.537067] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
  848. [ 1.538834] atmel_mxt_ts_640t 2-004b: read rev_id = 0x32
  849. [ 1.592583] atmel_mxt_ts_640t 2-004b: T19: vendor_id & gpio_mask = 0xf & 0x1c = 0xc
  850. [ 1.592619] atmel_mxt_ts_640t 2-004b: msg for t109 = 0x3 0x0
  851. [ 1.592644] atmel_mxt_ts_640t 2-004b: Calibration start!
  852. [ 1.593025] atmel_mxt_ts_640t 2-004b: Choose config 4: mxt_640t_biel_config.fw, is_default = 0
  853. [ 1.593461] atmel_mxt_ts_640t 2-004b: Got userdata info: 00 00 00 00 00 00 00 00
  854. [ 1.593505] atmel_mxt_ts_640t 2-004b: Config CRC 0xA75C5E: OK
  855. [ 1.598863] atmel_mxt_ts_640t 2-004b: xrange = 1919, yrange = 1079
  856. [ 1.598893] atmel_mxt_ts_640t 2-004b: Matrix Size X32Y20 Touchscreen size X1079Y1919
  857. [ 1.598930] atmel_mxt_ts_640t 2-004b: report area
  858. [ 1.598954] atmel_mxt_ts_640t 2-004b: report pressure
  859. [ 1.599179] input: atmel-maxtouch as /devices/f9924000.i2c/i2c-2/2-004b/input/input2
  860. [ 1.600191] synaptics_dsx_i2c 2-0070: id = 0
  861. [ 1.600219] synaptics_dsx_i2c 2-0070: power_gpio = 48
  862. [ 1.600242] synaptics_dsx_i2c 2-0070: reset_gpio = 60
  863. [ 1.600264] synaptics_dsx_i2c 2-0070: irq_gpio = 54
  864. [ 1.600286] synaptics_dsx_i2c 2-0070: x_flip = 0
  865. [ 1.600308] synaptics_dsx_i2c 2-0070: y_flip = 0
  866. [ 1.600329] synaptics_dsx_i2c 2-0070: swap_axes = 0
  867. [ 1.600351] synaptics_dsx_i2c 2-0070: power_on_state = 1
  868. [ 1.600373] synaptics_dsx_i2c 2-0070: reset_on_state = 0
  869. [ 1.600396] synaptics_dsx_i2c 2-0070: panel_x = 1080
  870. [ 1.600418] synaptics_dsx_i2c 2-0070: panel_y = 1920
  871. [ 1.600440] synaptics_dsx_i2c 2-0070: power_delay_ms = 160
  872. [ 1.600463] synaptics_dsx_i2c 2-0070: reset_delay_ms = 100
  873. [ 1.600485] synaptics_dsx_i2c 2-0070: reset_active_ms = 20
  874. [ 1.600509] synaptics_dsx_i2c 2-0070: key[0] = 139
  875. [ 1.600530] synaptics_dsx_i2c 2-0070: key[1] = 102
  876. [ 1.600552] synaptics_dsx_i2c 2-0070: key[2] = 158
  877. [ 1.600995] synaptics_dsx_i2c 2-0071: id = 1
  878. [ 1.601021] synaptics_dsx_i2c 2-0071: power_gpio = 48
  879. [ 1.601044] synaptics_dsx_i2c 2-0071: reset_gpio = 60
  880. [ 1.601066] synaptics_dsx_i2c 2-0071: irq_gpio = 54
  881. [ 1.601088] synaptics_dsx_i2c 2-0071: x_flip = 0
  882. [ 1.601110] synaptics_dsx_i2c 2-0071: y_flip = 0
  883. [ 1.601131] synaptics_dsx_i2c 2-0071: swap_axes = 0
  884. [ 1.601153] synaptics_dsx_i2c 2-0071: power_on_state = 1
  885. [ 1.601176] synaptics_dsx_i2c 2-0071: reset_on_state = 0
  886. [ 1.601199] synaptics_dsx_i2c 2-0071: panel_x = 1080
  887. [ 1.601220] synaptics_dsx_i2c 2-0071: panel_y = 1920
  888. [ 1.601243] synaptics_dsx_i2c 2-0071: power_delay_ms = 160
  889. [ 1.601265] synaptics_dsx_i2c 2-0071: reset_delay_ms = 100
  890. [ 1.601288] synaptics_dsx_i2c 2-0071: reset_active_ms = 20
  891. [ 1.601311] synaptics_dsx_i2c 2-0071: key[0] = 139
  892. [ 1.601333] synaptics_dsx_i2c 2-0071: key[1] = 102
  893. [ 1.601355] synaptics_dsx_i2c 2-0071: key[2] = 158
  894. [ 1.602162] gpio_request: gpio-54 (dsx_gpio_54
  895. [ 1.602167] ) status -16
  896. [ 1.602178] synaptics_rmi4_gpio_setup: Failed to get gpio 54 (code: -16)
  897. [ 1.602205] synaptics_dsx_i2c 2-0070: synaptics_rmi4_set_gpio: Failed to configure attention GPIO
  898. [ 1.602244] synaptics_dsx synaptics_dsx.0: synaptics_rmi4_probe: Failed to set up GPIO's
  899. [ 1.602284] synaptics_dsx: probe of synaptics_dsx.0 failed with error -16
  900. [ 1.602334] gpio_request: gpio-54 (dsx_gpio_54
  901. [ 1.602339] ) status -16
  902. [ 1.602349] synaptics_rmi4_gpio_setup: Failed to get gpio 54 (code: -16)
  903. [ 1.602374] synaptics_dsx_i2c 2-0071: synaptics_rmi4_set_gpio: Failed to configure attention GPIO
  904. [ 1.602411] synaptics_dsx synaptics_dsx.1: synaptics_rmi4_probe: Failed to set up GPIO's
  905. [ 1.602449] synaptics_dsx: probe of synaptics_dsx.1 failed with error -16
  906. [ 1.602502] fts_i2c_init
  907. [ 1.602569] fts_i2c_probe detect
  908. [ 1.602593] fts_i2c 2-0048: FTS driver [121108] Aug 31 2017 21:13:48
  909. [ 1.602617] fts_i2c 2-0048: FTS use protocol type B
  910. [ 1.602784] fts_i2c 2-0048: reset gpio= 60
  911. [ 1.602808] fts_i2c 2-0048: irq gpio= 54
  912. [ 1.602828] fts_i2c 2-0048: power gpio= 48
  913. [ 1.602848] fts_i2c 2-0048: lcd gpio= 25
  914. [ 1.602869] fts_i2c 2-0048: x_min = 0
  915. [ 1.602889] fts_i2c 2-0048: x_max = 1080
  916. [ 1.602909] fts_i2c 2-0048: y_min = 0
  917. [ 1.602928] fts_i2c 2-0048: y_max = 1920
  918. [ 1.602949] fts_i2c 2-0048: z_min = 1
  919. [ 1.602968] fts_i2c 2-0048: z_max = 128
  920. [ 1.602988] fts_i2c 2-0048: z_prox = 140
  921. [ 1.603009] fts_i2c 2-0048: key codes[0] = 139
  922. [ 1.603031] fts_i2c 2-0048: key codes[1] = 102
  923. [ 1.603052] fts_i2c 2-0048: key codes[2] = 158
  924. [ 1.603073] fts_i2c 2-0048: is mutual key = 1
  925. [ 1.603094] fts_i2c 2-0048: touch info = 2
  926. [ 1.603115] fts_i2c 2-0048: lcd id = 0
  927. [ 1.603135] fts_i2c 2-0048: module id = 2
  928. [ 1.603155] fts_i2c 2-0048: config name = fts_wintek_config_sharp.fw
  929. [ 1.603180] fts_i2c 2-0048: firmware name = fts_wintek_firmware_sharp.fw
  930. [ 1.603205] fts_i2c 2-0048: lcd id = 0
  931. [ 1.603225] fts_i2c 2-0048: module id = 4
  932. [ 1.603245] fts_i2c 2-0048: config name = fts_wintek_config_sharp.fw
  933. [ 1.603270] fts_i2c 2-0048: firmware name = fts_wintek_firmware_sharp.fw
  934. [ 1.603297] gpio_request: gpio-48 (fts_power_gpio) status -16
  935. [ 1.603309] fts_i2c 2-0048: power gpio request failed
  936. [ 1.603339] fts_i2c: probe of 2-0048 failed with error -16
  937. [ 1.604123] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
  938. [ 1.604350] qpnp_chg_thermal_monitor_work: temp 450 lvl 6 6
  939. [ 1.604738] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
  940. [ 1.604826] qcom,qpnp-rtc qpnp-rtc-f0573a00: setting system clock to 2017-08-31 16:12:58 UTC (1504195978)
  941. [ 1.605421] pwm-ir pwm_ir.97: reg-id = (null), pwm-id = 1, low-active = 0, use-timer = 0
  942. [ 1.605543] Registered IR keymap rc-lirc
  943. [ 1.605811] input: pwm-ir as /devices/pwm_ir.97/rc/rc0/input3
  944. [ 1.606006] rc0: pwm-ir as /devices/pwm_ir.97/rc/rc0
  945. [ 1.606282] rc rc0: lirc_dev: driver ir-lirc-codec (pwm-ir) registered at minor = 0
  946. [ 1.607695] msm_thermal:interrupt_mode_init Interrupt mode init
  947. [ 1.607732] msm_thermal:disable_msm_thermal Max frequency reset for CPU0
  948. [ 1.608183] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
  949. [ 1.608519] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
  950. [ 1.608556] msm_thermal:disable_msm_thermal Max frequency reset for CPU1
  951. [ 1.608567] msm_thermal:disable_msm_thermal Max frequency reset for CPU2
  952. [ 1.608576] msm_thermal:disable_msm_thermal Max frequency reset for CPU3
  953. [ 1.609293] Registered led device: red
  954. [ 1.609309] led_scale: scale 1 max 48 led id 3
  955. [ 1.609394] Registered led device: green
  956. [ 1.609408] led_scale: scale 1 max 48 led id 4
  957. [ 1.609493] Registered led device: blue
  958. [ 1.609507] led_scale: scale 1 max 48 led id 5
  959. [ 1.609725] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
  960. [ 1.609893] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
  961. [ 1.610314] Registered led device: led:flash_0
  962. [ 1.610649] Registered led device: led:flash_1
  963. [ 1.610783] Registered led device: led:flash_torch
  964. [ 1.610996] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
  965. [ 1.611158] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
  966. [ 1.611783] Registered led device: wled:backlight
  967. [ 1.611789] qcom,leds-qpnp leds-qpnp-f0574c00: bl: change to higher light 4095
  968. [ 1.611838] qcom,leds-qpnp leds-qpnp-f0574c00: bl: change to analog 4095
  969. [ 1.614110] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
  970. [ 1.614261] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
  971. [ 1.614494] Registered led device: button-backlight
  972. [ 1.614686] Registered led device: button-backlight1
  973. [ 1.614869] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
  974. [ 1.615022] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
  975. [ 1.615118] clock_late_init: Removing enables held for handed-off clocks
  976. [ 1.619277] ALSA device list:
  977. [ 1.619286] No soundcards found.
  978. [ 1.619376] Freeing init memory: 56K
  979. [ 1.621975] trampoline: Running trampoline v27
  980. [ 1.622048] trampoline: Initializing devices...
  981. [ 1.623009] trampoline: Linking partition 'sbl1' as 'sbl1'
  982. [ 1.623394] trampoline: Linking partition 'rpm' as 'rpm'
  983. [ 1.623743] trampoline: Linking partition 'tz' as 'tz'
  984. [ 1.624089] trampoline: Linking partition 'DDR' as 'DDR'
  985. [ 1.624444] trampoline: Linking partition 'ssd' as 'ssd'
  986. [ 1.624787] trampoline: Linking partition 'dbi' as 'dbi'
  987. [ 1.625134] trampoline: Linking partition 'aboot' as 'aboot'
  988. [ 1.625485] trampoline: Linking partition 'bk1' as 'bk1'
  989. [ 1.625827] trampoline: Linking partition 'misc' as 'misc'
  990. [ 1.626760] trampoline: Linking partition 'logo' as 'logo'
  991. [ 1.627124] trampoline: Linking partition 'bk2' as 'bk2'
  992. [ 1.627479] trampoline: Linking partition 'modemst1' as 'modemst1'
  993. [ 1.627825] trampoline: Linking partition 'modemst2' as 'modemst2'
  994. [ 1.628185] trampoline: Linking partition 'fsc' as 'fsc'
  995. [ 1.628564] trampoline: Linking partition 'bk3' as 'bk3'
  996. [ 1.628907] trampoline: Linking partition 'fsg' as 'fsg'
  997. [ 1.629261] trampoline: Linking partition 'bk4' as 'bk4'
  998. [ 1.629607] trampoline: Linking partition 'bk5' as 'bk5'
  999. [ 1.629948] trampoline: Linking partition 'boot' as 'boot'
  1000. [ 1.630303] trampoline: Linking partition 'recovery' as 'recovery'
  1001. [ 1.630650] trampoline: Linking partition 'persist' as 'persist'
  1002. [ 1.631119] trampoline: Linking partition 'modem' as 'modem'
  1003. [ 1.631393] atmel_mxt_ts_640t 2-004b: msg for t109 = 0x3 0x0
  1004. [ 1.631582] trampoline: Linking partition 'system' as 'system'
  1005. [ 1.631928] trampoline: Linking partition 'cache' as 'cache'
  1006. [ 1.632275] trampoline: Linking partition 'userdata' as 'userdata'
  1007. [ 1.635608] trampoline: Done initializing
  1008. [ 1.635630] trampoline: nkk71: check by-name support
  1009. [ 1.635659] trampoline: nkk71: begin populate
  1010. [ 1.635691] trampoline: nkk71: Error opening EMMC /proc/emmc
  1011. [ 1.635708] trampoline: nkk71: populate done
  1012. [ 1.635729] trampoline: Loading fstab "/mrom.fstab"...
  1013. [ 1.658754] atmel_mxt_ts_640t 2-004b: Calibration start!
  1014. [ 1.698436] msm-dwc3 msm_dwc3: chg_type = USB_SDP_CHARGER
  1015. [ 1.748705] EXT4-fs (mmcblk0p25): Unrecognized mount option "length=-16384" or missing value
  1016. [ 1.748823] trampoline: Failed to mount /realdata with data from fstab, trying all filesystems
  1017. [ 1.751320] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nomblk_io_submit,noauto_da_alloc,errors=panic
  1018. [ 1.751356] trampoline: /realdata successfuly mounted with fs ext4
  1019. [ 1.754815] trampoline: Starting adbd
  1020. [ 1.755260] trampoline: Running multirom
  1021. [ 1.766697] multirom: Running MultiROM v33
  1022. [ 1.766868] multirom: Loading MultiROM status...
  1023. [ 1.766906] multirom: Loading fstab "/mrom.fstab"...
  1024. [ 1.768495] multirom: Adding ROM Internal
  1025. [ 1.771045] multirom: NO_KEXEC(4.1): Checking primary slot...
  1026. [ 1.771068] multirom: NO_KEXEC(4.1): locating boot partition...
  1027. [ 1.771088] multirom: NO_KEXEC(4.1): 'multirom_status' not set up yet, fstab_auto_load ourselves
  1028. [ 1.771117] multirom: Loading fstab "/mrom.fstab"...
  1029. [ 1.771353] multirom: NO_KEXEC(4.1): found boot at '/dev/block/mmcblk0p19'
  1030. [ 1.772011] multirom: NO_KEXEC(4.1): Checking the primary slot bootimg for the secondary tag; res=0
  1031. [ 1.772034] multirom: NO_KEXEC(4.1): primary bootimg, so second_boot=0
  1032. [ 1.772094] multirom: Dumping multirom status:
  1033. [ 1.772109] multirom: is_second_boot=0
  1034. [ 1.772124] multirom: is_running_in_primary_rom=1
  1035. [ 1.772138] multirom: current_rom=Internal
  1036. [ 1.772151] multirom: no_kexec=1
  1037. [ 1.772163] multirom: colors_v2=0
  1038. [ 1.772176] multirom: brightness=40
  1039. [ 1.772189] multirom: enable_adb=0
  1040. [ 1.772203] multirom: enable_kmsg_logging=0
  1041. [ 1.772217] multirom: rotation=0
  1042. [ 1.772230] multirom: force_generic_fb=0
  1043. [ 1.772261] multirom: anim_duration_coef=1.000000
  1044. [ 1.772275] multirom: hide_internal=0
  1045. [ 1.772289] multirom: int_display_name=NULL
  1046. [ 1.772303] multirom: auto_boot_seconds=5
  1047. [ 1.772317] multirom: auto_boot_rom=Internal
  1048. [ 1.772330] multirom: auto_boot_type=0
  1049. [ 1.772344] multirom: curr_rom_part=NULL
  1050. [ 1.772355] multirom:
  1051. [ 1.772367] multirom: ROM: Internal
  1052. [ 1.772380] multirom: base_path: /realdata/media/0/multirom/roms/Internal
  1053. [ 1.772396] multirom: icon_path: /realdata/media/0/multirom/icons/romic_android.png
  1054. [ 1.772412] multirom: type: 0
  1055. [ 1.772425] multirom: has_bootimg: 0
  1056. [ 1.772443] multirom: NO_KEXEC(4.1): primary_boot.img location will be=/realdata/media/0/multirom/primary_boot.img
  1057. [ 1.772463] multirom: NO_KEXEC(4.1): locating boot partition...
  1058. [ 1.772480] multirom: NO_KEXEC(4.1): found boot at '/dev/block/mmcblk0p19'
  1059. [ 1.784531] multirom: CONFIG_KEXEC_HARDBOOT=y not found in /proc/config.gz!
  1060. [ 1.791804] multirom: CONFIG_PROC_DEVICETREE=y not found in /proc/config.gz!
  1061. [ 1.791867] multirom: NO_KEXEC(4.1): returning cached info is_second_boot=0
  1062. [ 1.792002] multirom: Left Split=0
  1063. [ 1.792017] multirom: Right Split=0
  1064. [ 1.806256] multirom: Framebuffer implementation: Qualcomm ION overlay
  1065. [ 1.825322] mdss_dsi_on+: ctrl=f0706810 ndx=0
  1066. [ 1.825337] mdss_dsi_on:411 Panel already on.
  1067. [ 1.825351] mdss_dsi_unblank+:
  1068. [ 1.828220] mdss_dsi_unblank-:
  1069. [ 1.831318] multirom: Using universal theme (-1)
  1070. [ 2.290923] multirom: Dumping multirom status:
  1071. [ 2.290950] multirom: is_second_boot=0
  1072. [ 2.290965] multirom: is_running_in_primary_rom=1
  1073. [ 2.290979] multirom: current_rom=Internal
  1074. [ 2.290992] multirom: no_kexec=1
  1075. [ 2.291005] multirom: colors_v2=0
  1076. [ 2.291018] multirom: brightness=40
  1077. [ 2.291031] multirom: enable_adb=0
  1078. [ 2.291044] multirom: enable_kmsg_logging=0
  1079. [ 2.291056] multirom: rotation=0
  1080. [ 2.291069] multirom: force_generic_fb=0
  1081. [ 2.291090] multirom: anim_duration_coef=1.000000
  1082. [ 2.291103] multirom: hide_internal=0
  1083. [ 2.291116] multirom: int_display_name=NULL
  1084. [ 2.291129] multirom: auto_boot_seconds=5
  1085. [ 2.291142] multirom: auto_boot_rom=Internal
  1086. [ 2.291155] multirom: auto_boot_type=0
  1087. [ 2.291168] multirom: curr_rom_part=NULL
  1088. [ 2.291179] multirom:
  1089. [ 2.291190] multirom: ROM: Internal
  1090. [ 2.291203] multirom: base_path: /realdata/media/0/multirom/roms/Internal
  1091. [ 2.291218] multirom: icon_path: /realdata/media/0/multirom/icons/romic_android.png
  1092. [ 2.291234] multirom: type: 0
  1093. [ 2.291246] multirom: has_bootimg: 0
  1094. [ 5.485260] qpnp_chg_adc_notification: temp = 452 state = warm
  1095. [ 5.485276] qpnp_chg_vbatdet_set: voltage=3950 setting 23
  1096. [ 5.485403] qpnp_chg_adc_notification: warm 1, cool 0, low = 430 deciDegC, high = 600 deciDegC
  1097. [ 6.439322] qpnp_invalid_charger_work: qpnp_invalid_charger_work usb 1 batt 1 status 2 usb online 0
  1098. [ 6.439403] qpnp_chg_iusbmax_set: mA 500
  1099. [ 6.439500] qpnp_chg_chgr_chg_fastchg_irq_handler: FAST_CHG IRQ triggered, fastchg_on: 1
  1100. [ 6.439613] qpnp_chg_set_appropriate_battery_current: ibat setting 500 mA
  1101. [ 6.439712] qpnp_chg_vbatdet_lo_irq_handler: vbatdet-lo triggered
  1102. [ 6.439733] qpnp_chg_vbatdet_lo_irq_handler: chg_done chg_sts: 0x20 triggered
  1103. [ 6.457778] BMS: adjust_soc: s 35 i 188439 v 3693216 ocv 3784000 rbatt 156 uuc 90090 cc 1854 r 1111110 t 448 f 3003000
  1104. [ 9.544004] mdss_dsi_blank+:
  1105. [ 9.546898] mdss_dsi_panel_off: ctrl=f0706810 ndx=0
  1106. [ 9.722561] mdss_dsi_isr: ndx=0 isr=3300203
  1107. [ 9.722581] mdss_dsi_ack_err_status: status=1000040
  1108. [ 9.722639] mdss_dsi_dcs_read_cb: 0x8.
  1109. [ 9.722737] mdss_dsi_panel_off:-
  1110. [ 9.722746] mdss_dsi_blank-:End
  1111. [ 9.724479] mdss_dsi_panel_power_on: enable=0
  1112. [ 9.724489] mdss_dsi_panel_reset: enable = 0
  1113. [ 9.780182] mdss_dsi_panel_pon: Need not pon
  1114. [ 9.782771] multirom: No run-on-boot scripts for ROM Internal
  1115. [ 9.782824] multirom: Saving multirom status
  1116. [ 9.796806] trampoline: Stopping adbd
  1117. [ 9.852404] trampoline: Running main_init
  1118. [ 9.852439] trampoline: Fixing up symlink '/sbin/ueventd' -> '../main_init' to '/sbin/ueventd' -> '../init')
  1119. [ 9.852501] trampoline: Fixing up symlink '/sbin/watchdogd' -> '../main_init' to '/sbin/watchdogd' -> '../init')
  1120. [ 10.787388] initrd: checking filesystem integrity for the userdata partition
  1121. [ 10.794358] EXT3-fs (mmcblk0p25): error: couldn't mount because of unsupported optional features (40)
  1122. [ 10.794828] EXT2-fs (mmcblk0p25): error: couldn't mount because of unsupported optional features (40)
  1123. [ 10.801139] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: errors=remount-ro
  1124. [ 10.843226] initrd: checking filesystem for userdata took (including e2fsck) 0 seconds
  1125. [ 10.861156] initrd: mounting /dev/mmcblk0p25
  1126. [ 10.862855] EXT3-fs (mmcblk0p25): error: unrecognized mount option "discard" or missing value
  1127. [ 10.869476] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
  1128. [ 10.871934] EXT4-fs (mmcblk0p25): mounted filesystem with journalled data mode. Opts: discard,data=journal
  1129. [ 10.876241] initrd: boot mode: ubuntu
  1130. [ 10.894508] EXT2-fs (loop0): warning: mounting unchecked fs, running e2fsck is recommended
  1131. [ 10.894809] initrd: mounting system.img (user mode)
  1132. [ 10.904243] initrd: mounting device image as ro
  1133. [ 10.936507] EXT3-fs (loop1): error: couldn't mount because of unsupported optional features (40)
  1134. [ 10.936858] EXT2-fs (loop1): error: couldn't mount because of unsupported optional features (40)
  1135. [ 10.939208] EXT4-fs (loop1): mounted filesystem with ordered data mode. Opts: (null)
  1136. [ 10.945003] initrd: device is unknown
  1137. [ 11.625748] initrd: checking fstab /root/var/lib/lxc/android/rootfs/fstab* for additional mount points
  1138. [ 11.656449] initrd: checking mount label cache
  1139. [ 11.657123] initrd: mounting /dev/disk/by-partlabel/cache as /root/android//cache
  1140. [ 11.664829] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,noauto_da_alloc,errors=panic
  1141. [ 11.677887] initrd: checking mount label persist
  1142. [ 11.678590] initrd: mounting /dev/disk/by-partlabel/persist as /root/android//persist
  1143. [ 11.694492] EXT4-fs (mmcblk0p21): warning: maximal mount count reached, running e2fsck is recommended
  1144. [ 11.697256] EXT4-fs (mmcblk0p21): recovery complete
  1145. [ 11.698351] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nodelalloc,nomblk_io_submit,errors=panic
  1146. [ 11.705619] initrd: checking mount label modem
  1147. [ 11.706252] initrd: mounting /dev/disk/by-partlabel/modem as /root/android//firmware
  1148. [ 11.732399] initrd: checking mount label boot
  1149. [ 11.733048] initrd: mounting /dev/disk/by-partlabel/boot as /root/android//boot
  1150. [ 11.743734] initrd: checking mount label recovery
  1151. [ 11.744372] initrd: mounting /dev/disk/by-partlabel/recovery as /root/android//recovery
  1152. [ 11.755236] initrd: checking mount label misc
  1153. [ 11.755867] initrd: mounting /dev/disk/by-partlabel/misc as /root/android//misc
  1154. [ 11.766335] initrd: checking mount label modem
  1155. [ 11.766968] initrd: mounting /dev/disk/by-partlabel/modem as /root/android//radio
  1156. [ 11.777723] initrd: checking mount label sbl1
  1157. [ 11.778371] initrd: mounting /dev/disk/by-partlabel/sbl1 as /root/android//sbl1
  1158. [ 11.789249] initrd: checking mount label sbl2
  1159. [ 11.796553] initrd: checking mount label sbl3
  1160. [ 11.803793] initrd: checking mount label tz
  1161. [ 11.804421] initrd: mounting /dev/disk/by-partlabel/tz as /root/android//tz
  1162. [ 11.815241] initrd: checking mount label rpm
  1163. [ 11.815879] initrd: mounting /dev/disk/by-partlabel/rpm as /root/android//rpm
  1164. [ 11.826369] initrd: checking mount label aboot
  1165. [ 11.827005] initrd: mounting /dev/disk/by-partlabel/aboot as /root/android//aboot
  1166. [ 11.842076] initrd: checking mount label usb1
  1167. [ 11.872013] initrd: checking mount label cache
  1168. [ 11.872639] initrd: mounting /dev/disk/by-partlabel/cache as /root/android//cache
  1169. [ 11.887083] initrd: checking mount label persist
  1170. [ 11.887718] initrd: mounting /dev/disk/by-partlabel/persist as /root/android//persist
  1171. [ 11.896665] initrd: checking mount label modem
  1172. [ 11.897294] initrd: mounting /dev/disk/by-partlabel/modem as /root/android//firmware
  1173. [ 11.905982] initrd: checking mount label boot
  1174. [ 11.906624] initrd: mounting /dev/disk/by-partlabel/boot as /root/android//boot
  1175. [ 11.917509] initrd: checking mount label recovery
  1176. [ 11.918138] initrd: mounting /dev/disk/by-partlabel/recovery as /root/android//recovery
  1177. [ 11.930410] initrd: checking mount label misc
  1178. [ 11.931037] initrd: mounting /dev/disk/by-partlabel/misc as /root/android//misc
  1179. [ 11.941516] initrd: checking mount label modem
  1180. [ 11.942151] initrd: mounting /dev/disk/by-partlabel/modem as /root/android//radio
  1181. [ 11.952980] initrd: checking mount label sbl1
  1182. [ 11.953612] initrd: mounting /dev/disk/by-partlabel/sbl1 as /root/android//sbl1
  1183. [ 11.964140] initrd: checking mount label sbl2
  1184. [ 11.971765] initrd: checking mount label sbl3
  1185. [ 11.979051] initrd: checking mount label tz
  1186. [ 11.979684] initrd: mounting /dev/disk/by-partlabel/tz as /root/android//tz
  1187. [ 11.990442] initrd: checking mount label rpm
  1188. [ 11.991080] initrd: mounting /dev/disk/by-partlabel/rpm as /root/android//rpm
  1189. [ 12.001603] initrd: checking mount label aboot
  1190. [ 12.002232] initrd: mounting /dev/disk/by-partlabel/aboot as /root/android//aboot
  1191. [ 12.017364] initrd: checking mount label usb1
  1192. [ 12.017763] initrd: mounting /root/var/lib/lxc/android/system.img as /root/android/system
  1193. [ 12.505299] Adding 2047996k swap on /root/userdata/SWAP.img. Priority:-1 extents:26 across:8970236k SS
  1194. [ 12.685308] init: Failed to spawn adbd main process: unable to execute: No such file or directory
  1195. [ 12.708841] init: ureadahead-touch main process (1104) terminated with status 5
  1196. [ 14.249215] init: bluetooth-touch main process (1344) terminated with status 126
  1197. [ 14.253416] init: update-machine-info main process (1346) terminated with status 126
  1198. [ 14.310425] init: bluetooth main process (1355) terminated with status 1
  1199. [ 14.310457] init: bluetooth main process ended, respawning
  1200. [ 14.387306] init: bluetooth-touch main process (1373) terminated with status 126
  1201. [ 14.438258] init: /init.environ.rc: 13: export requires 2 arguments
  1202. [ 14.440063] init: /init.cancro.rc: 841: invalid command 'rmmod'
  1203. [ 14.440120] init: /init.cancro.rc: 892: ignored duplicate definition of service 'charger'
  1204. [ 14.440323] init: /init.cancro.rc: 961: ignored duplicate definition of service 'sensorservice'
  1205. [ 15.450927] init: Detected MSM SOC ID=194 SOC VER=65536 BOARD TYPE=MTP
  1206. [ 15.451257] init: failed to open '/sys/class/graphics/fb2/msm_fb_type'
  1207. [ 15.478684] pil-q6v5-lpass fe200000.qcom,lpass: adsp: loading from 0x05a00000 to 0x06e00000
  1208. [ 18.804470] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Power/Clock ready interrupt received
  1209. [ 18.826103] pil-q6v5-lpass fe200000.qcom,lpass: Subsystem error monitoring/handling services are up
  1210. [ 18.878670] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Brought out of reset
  1211. [ 18.879232] apr_tal:Q6 Is Up
  1212. [ 18.879960] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
  1213. [ 18.880213] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
  1214. [ 18.880251] diag: In diag_send_msg_mask_update, invalid status 0
  1215. [ 18.880265] diag: In diag_send_log_mask_update, invalid status 0
  1216. [ 18.880707] adsp-loader qcom,msm-adsp-loader.52: adsp_loader_do: Q6/ADSP image is loaded
  1217. [ 18.991132] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
  1218. [ 18.991334] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
  1219. [ 18.997520] sps:BAM 0xfe104000 (va:0xc6480000) enabled: ver:0x13, number of pipes:31
  1220. [ 18.997525] sps:BAM 0xfe104000 is registered.
  1221. [ 19.001690] taiko-slim taiko-slim-pgd: Platform data from device tree
  1222. [ 19.001776] taiko-slim taiko-slim-pgd: cdc-vdd-buck: vol=[2150000 2150000]uV, curr=[650000]uA, ond 0
  1223. [ 19.001805] taiko-slim taiko-slim-pgd: cdc-vdd-tx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
  1224. [ 19.001833] taiko-slim taiko-slim-pgd: cdc-vdd-rx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
  1225. [ 19.001861] taiko-slim taiko-slim-pgd: cdc-vddpx-1: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0
  1226. [ 19.001892] taiko-slim taiko-slim-pgd: cdc-vdd-a-1p2v: vol=[1225000 1225000]uV, curr=[10000]uA, ond 0
  1227. [ 19.001920] taiko-slim taiko-slim-pgd: cdc-vddcx-1: vol=[1225000 1225000]uV, curr=[10000]uA, ond 0
  1228. [ 19.001949] taiko-slim taiko-slim-pgd: cdc-vddcx-2: vol=[1225000 1225000]uV, curr=[10000]uA, ond 0
  1229. [ 19.001977] taiko-slim taiko-slim-pgd: cdc-vdd-spkdrv: vol=[5000000 5000000]uV, curr=[1250000]uA, ond 1
  1230. [ 19.058807] slimbus:1 laddr:0xcb, EAPC:0x1:0xa0
  1231. [ 19.058896] taiko-slim taiko-slim-pgd: wcd9xxx_slim_device_up: slim device up
  1232. [ 19.059255] slimbus:1 laddr:0xca, EAPC:0x0:0xa0
  1233. [ 19.064861] taiko-slim taiko-slim-pgd: wcd9xxx_check_codec_type: detected taiko_codec, major 0x102, minor 0x1, ver 0x2
  1234. [ 19.064869] wcd9xxx_core_res_init: num_irqs = 31, num_irq_regs = 4
  1235. [ 19.068378] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
  1236. [ 19.069122] taiko codec probe...
  1237. [ 19.069127] taiko_codec taiko_codec: taiko_codec_probe()
  1238. [ 19.621908] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
  1239. [ 19.648504] init: cannot find '/system/bin/ubuntuappmanager.disabled', disabling 'ubuntuappmanager'
  1240. [ 19.648545] init: cannot find '/system/bin/qcom-system-daemon', disabling 'qcomsysd'
  1241. [ 19.760090] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
  1242. [ 19.760598] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
  1243. [ 19.761006] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
  1244. [ 19.761402] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
  1245. [ 19.761814] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
  1246. [ 19.762213] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
  1247. [ 19.762609] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
  1248. [ 19.762982] asoc: msm-stub-rx <-> msm-dai-q6-dev.241 mapping ok
  1249. [ 19.763354] asoc: msm-stub-tx <-> msm-dai-q6-dev.240 mapping ok
  1250. [ 19.763833] compress asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
  1251. [ 19.788179] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
  1252. [ 19.788946] asoc: snd-soc-dummy-dai <-> SLIMBUS1_HOSTLESS mapping ok
  1253. [ 19.789351] asoc: snd-soc-dummy-dai <-> SLIMBUS3_HOSTLESS mapping ok
  1254. [ 19.789750] asoc: snd-soc-dummy-dai <-> SLIMBUS4_HOSTLESS mapping ok
  1255. [ 19.790149] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
  1256. [ 19.790672] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
  1257. [ 19.791060] asoc: snd-soc-dummy-dai <-> LSM1 mapping ok
  1258. [ 19.791571] asoc: snd-soc-dummy-dai <-> MultiMedia6 mapping ok
  1259. [ 19.826393] asoc: snd-soc-dummy-dai <-> MultiMedia7 mapping ok
  1260. [ 19.826878] asoc: snd-soc-dummy-dai <-> MultiMedia8 mapping ok
  1261. [ 19.827279] asoc: snd-soc-dummy-dai <-> QCHAT mapping ok
  1262. [ 19.827666] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
  1263. [ 19.828071] asoc: snd-soc-dummy-dai <-> Voice2 mapping ok
  1264. [ 19.828851] asoc: snd-soc-dummy-dai <-> INT_HFP_BT_HOSTLESS mapping ok
  1265. [ 19.829289] asoc: snd-soc-dummy-dai <-> MultiMedia6 mapping ok
  1266. [ 19.829668] asoc: taiko_vifeedback <-> msm-dai-q6-dev.16393 mapping ok
  1267. [ 19.852729] init: rild main process (1411) terminated with status 126
  1268. [ 19.869876] asoc: taiko_rx2 <-> msm-dai-q6-dev.16388 mapping ok
  1269. [ 19.870317] asoc: taiko_tx2 <-> msm-dai-q6-dev.16389 mapping ok
  1270. [ 19.870710] asoc: snd-soc-dummy-dai <-> LSM2 mapping ok
  1271. [ 19.871100] asoc: snd-soc-dummy-dai <-> LSM3 mapping ok
  1272. [ 19.871488] asoc: snd-soc-dummy-dai <-> LSM4 mapping ok
  1273. [ 19.871873] asoc: snd-soc-dummy-dai <-> LSM5 mapping ok
  1274. [ 19.872262] asoc: snd-soc-dummy-dai <-> LSM6 mapping ok
  1275. [ 19.872646] asoc: snd-soc-dummy-dai <-> LSM7 mapping ok
  1276. [ 19.873032] asoc: snd-soc-dummy-dai <-> LSM8 mapping ok
  1277. [ 19.873561] asoc: snd-soc-dummy-dai <-> MultiMedia9 mapping ok
  1278. [ 19.899339] asoc: snd-soc-dummy-dai <-> VoWLAN mapping ok
  1279. [ 19.902104] asoc: msm-stub-rx <-> msm-dai-q6-dev.12288 mapping ok
  1280. [ 19.902470] asoc: msm-stub-tx <-> msm-dai-q6-dev.12289 mapping ok
  1281. [ 19.902930] asoc: msm-stub-rx <-> msm-dai-q6-dev.12292 mapping ok
  1282. [ 19.903292] asoc: msm-stub-tx <-> msm-dai-q6-dev.12293 mapping ok
  1283. [ 19.903655] asoc: msm-stub-rx <-> msm-dai-q6-dev.224 mapping ok
  1284. [ 19.904014] asoc: msm-stub-tx <-> msm-dai-q6-dev.225 mapping ok
  1285. [ 19.904371] asoc: msm-stub-rx <-> msm-dai-q6-auxpcm.1 mapping ok
  1286. [ 19.904728] asoc: msm-stub-tx <-> msm-dai-q6-auxpcm.1 mapping ok
  1287. [ 19.905090] asoc: msm-stub-rx <-> msm-dai-q6-auxpcm.2 mapping ok
  1288. [ 19.905447] asoc: msm-stub-tx <-> msm-dai-q6-auxpcm.2 mapping ok
  1289. [ 19.905855] asoc: snd-soc-dummy-dai <-> SEC_MI2S_HOSTLESS mapping ok
  1290. [ 19.928251] asoc: snd-soc-dummy-dai <-> QUAT_MI2S_HOSTLESS mapping ok
  1291. [ 19.936714] msm_audrx_init(), dev_namemsm-dai-q6-dev.16384
  1292. [ 20.082453] init: cannot find '/system/bin/qrngd', disabling 'qrngd'
  1293. [ 20.097310] healthd: wakealarm_init: timerfd_create failed
  1294. [ 20.206330] asoc: taiko_rx1 <-> msm-dai-q6-dev.16384 mapping ok
  1295. [ 20.207798] asoc: taiko_tx1 <-> msm-dai-q6-dev.16385 mapping ok
  1296. [ 20.208184] asoc: taiko_rx1 <-> msm-dai-q6-dev.16386 mapping ok
  1297. [ 20.217515] asoc: taiko_tx1 <-> msm-dai-q6-dev.16387 mapping ok
  1298. [ 20.217907] asoc: taiko_rx1 <-> msm-dai-q6-dev.16390 mapping ok
  1299. [ 20.218277] asoc: taiko_tx1 <-> msm-dai-q6-dev.16391 mapping ok
  1300. [ 20.218841] asoc: taiko_rx1 <-> msm-dai-q6-dev.16392 mapping ok
  1301. [ 20.219210] asoc: msm-stub-tx <-> msm-dai-q6-dev.32772 mapping ok
  1302. [ 20.219577] asoc: msm-stub-tx <-> msm-dai-q6-dev.32771 mapping ok
  1303. [ 20.219943] asoc: taiko_mad1 <-> msm-dai-q6-dev.16395 mapping ok
  1304. [ 20.220315] asoc: msm-stub-rx <-> msm-dai-q6-dev.32773 mapping ok
  1305. [ 20.220682] asoc: msm-stub-rx <-> msm-dai-q6-dev.32770 mapping ok
  1306. [ 20.289783] input: msm8974-taiko-mtp-snd-card Button Jack as /devices/fe02c000.sound/sound/card0/input4
  1307. [ 20.290043] input: msm8974-taiko-mtp-snd-card Headset Jack as /devices/fe02c000.sound/sound/card0/input5
  1308. [ 20.305070] msm8974-asoc-taiko fe02c000.sound: property qcom,us-euro-gpios not detected in node /soc/sound
  1309. [ 20.348434] init: cannot find '/system/bin/cnd', disabling 'cnd'
  1310. [ 20.353140] init: cannot find '/system/bin/ATFWD-daemon', disabling 'atfwd'
  1311. [ 20.363317] init: cannot find '/system/bin/ssr_diag', disabling 'ssr_diag'
  1312. [ 20.421429] logd.auditd: start
  1313. [ 20.918861] systemd-logind[1814]: New seat seat0.
  1314. [ 20.949480] systemd-logind[1814]: Failed to start user service: Unknown unit: user@0.service
  1315. [ 20.966315] systemd-logind[1814]: New session c1 of user root.
  1316. [ 20.984837] 'opened /dev/adsprpc-smd c 241 0'
  1317. [ 21.039026] init: cannot find '/system/bin/loc_launcher', disabling 'loc_launcher'
  1318. [ 21.043453] init: cannot find '/system/bin/nqs', disabling 'nqs'
  1319. [ 21.256620] msm_thermal:store_cc_enabled Core control disabled
  1320. [ 21.299615] msm_thermal:store_cc_enabled Core control enabled
  1321. [ 21.300808] adb_open
  1322. [ 21.407249] dwc3 f9200000.dwc3: Avail curr from USB = 2 type 4
  1323. [ 21.407263] android_work: android_work: did not send uevent (0 0 (null))
  1324. [ 21.505613] msm_thermal:set_enabled enabled = 0
  1325. [ 21.527365] dwc3 f9200000.dwc3: Avail curr from USB = 0 type 4
  1326. [ 21.527427] qpnp_chg_iusbmax_set: mA 100
  1327. [ 21.527495] qpnp_chg_chgr_chg_fastchg_irq_handler: FAST_CHG IRQ triggered, fastchg_on: 0
  1328. [ 21.582234] android_work: android_work: did not send uevent (0 0 (null))
  1329. [ 21.639508] BMS: adjust_soc: s 35 i 513644 v 3686190 ocv 3784000 rbatt 156 uuc 90090 cc 1861 r 1111110 t 450 f 3003000
  1330. [ 21.639645] android_work: android_work: sent uevent USB_STATE=CONNECTED
  1331. [ 21.643135] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  1332. [ 21.680149] wcnss_wlan triggered by userspace
  1333. [ 21.767318] android_work: android_work: sent uevent USB_STATE=CONNECTED
  1334. [ 21.768618] android_usb gadget: high-speed config #1: fe8050c8.android_usb
  1335. [ 21.768666] dwc3 f9200000.dwc3: Avail curr from USB = 500 type 4
  1336. [ 21.768792] qpnp_chg_iusbmax_set: mA 500
  1337. [ 21.768877] qpnp_chg_vbatdet_lo_irq_handler: vbatdet-lo triggered
  1338. [ 21.768892] qpnp_chg_vbatdet_lo_irq_handler: chg_done chg_sts: 0x20 triggered
  1339. [ 21.768944] qpnp_chg_chgr_chg_fastchg_irq_handler: FAST_CHG IRQ triggered, fastchg_on: 1
  1340. [ 21.769049] qpnp_chg_set_appropriate_battery_current: ibat setting 500 mA
  1341. [ 21.828367] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  1342. [ 21.879254] BMS: adjust_soc: s 35 i -80107 v 3764925 ocv 3784000 rbatt 156 uuc 90120 cc 1858 r 1111480 t 446 f 3004000
  1343. [ 21.910904] wcnss_pm_qos_add_request: add request
  1344. [ 21.910913] wcnss_pm_qos_update_request: update request 100
  1345. [ 21.911079] wcnss_trigger_config: adc get failed
  1346. [ 21.926188] [dwc3_ep0_inspect_setup]host system may be mac os or linux
  1347. [ 22.220123] BMS: adjust_soc: s 35 i -104285 v 3771657 ocv 3784000 rbatt 156 uuc 90120 cc 1854 r 1111480 t 446 f 3004000
  1348. [ 27.011064] init: cannot find '/system/bin/location-mq', disabling 'location_mq'
  1349. [ 27.011176] init: cannot find '/system/bin/xtwifi-inet-agent', disabling 'xtwifi_inet'
  1350. [ 27.011364] init: cannot find '/system/bin/xtwifi-client', disabling 'xtwifi_client'
  1351. [ 28.118883] init: cannot find '/system/bin/lowi-server', disabling 'lowi-server'
  1352. [ 29.457258] dwc3 f9200000.dwc3: request c2241b00 was not queued to ep0out
  1353. [ 29.457370] adb_release
  1354. [ 29.499048] mtp_bind_config
  1355. [ 29.499276] init: cannot find '/sbin/adbd', disabling 'adbd'
  1356. [ 29.605513] dwc3 f9200000.dwc3: Avail curr from USB = 2 type 4
  1357. [ 29.605530] android_work: android_work: did not send uevent (1 1 (null))
  1358. [ 29.605589] qpnp_chg_iusbmax_set: mA 100
  1359. [ 29.605641] qpnp_chg_chgr_chg_fastchg_irq_handler: FAST_CHG IRQ triggered, fastchg_on: 0
  1360. [ 29.670016] qpnp_chg_usb_chg_gone_irq_handler: chg_gone triggered, usb 1 7
  1361. [ 29.709067] BMS: adjust_soc: s 35 i 528067 v 3688533 ocv 3784000 rbatt 156 uuc 90090 cc 1891 r 1111110 t 450 f 3003000
  1362. [ 29.727119] dwc3 f9200000.dwc3: Avail curr from USB = 0 type 4
  1363. [ 29.727168] qpnp_chg_iusbmax_set: mA 100
  1364. [ 29.728182] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  1365. [ 29.782124] android_work: android_work: did not send uevent (0 0 (null))
  1366. [ 29.839169] android_work: android_work: sent uevent USB_STATE=CONNECTED
  1367. [ 29.842786] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  1368. [ 29.967193] android_work: android_work: sent uevent USB_STATE=CONNECTED
  1369. [ 29.968643] android_usb gadget: high-speed config #1: fe8050c8.android_usb
  1370. [ 29.968740] dwc3 f9200000.dwc3: Avail curr from USB = 500 type 4
  1371. [ 29.968878] qpnp_chg_iusbmax_set: mA 500
  1372. [ 30.028374] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  1373. [ 30.668436] qpnp_chg_vbatdet_lo_irq_handler: vbatdet-lo triggered
  1374. [ 30.668455] qpnp_chg_vbatdet_lo_irq_handler: chg_done chg_sts: 0x20 triggered
  1375. [ 30.668513] qpnp_chg_chgr_chg_fastchg_irq_handler: FAST_CHG IRQ triggered, fastchg_on: 1
  1376. [ 30.668618] qpnp_chg_set_appropriate_battery_current: ibat setting 500 mA
  1377. [ 30.716934] BMS: adjust_soc: s 35 i -107190 v 3754095 ocv 3784000 rbatt 156 uuc 90120 cc 2016 r 1111480 t 445 f 3004000
  1378. [ 39.643103] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
  1379. [ 39.643377] [rmnet1] error: rmnet_ioct called for unsupported cmd[35585]
  1380. [ 39.643593] [rmnet2] error: rmnet_ioct called for unsupported cmd[35585]
  1381. [ 39.643808] [rmnet3] error: rmnet_ioct called for unsupported cmd[35585]
  1382. [ 39.644075] [rmnet4] error: rmnet_ioct called for unsupported cmd[35585]
  1383. [ 39.644284] [rmnet5] error: rmnet_ioct called for unsupported cmd[35585]
  1384. [ 39.644498] [rmnet6] error: rmnet_ioct called for unsupported cmd[35585]
  1385. [ 39.644759] [rmnet7] error: rmnet_ioct called for unsupported cmd[35585]
  1386. [ 39.644974] [rmnet_usb0] error: rmnet_ioct called for unsupported cmd[35585]
  1387. [ 39.645197] [rev_rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
  1388. [ 39.645468] [rev_rmnet1] error: rmnet_ioct called for unsupported cmd[35585]
  1389. [ 39.645689] [rev_rmnet2] error: rmnet_ioct called for unsupported cmd[35585]
  1390. [ 39.645903] [rev_rmnet3] error: rmnet_ioct called for unsupported cmd[35585]
  1391. [ 39.646174] [rev_rmnet4] error: rmnet_ioct called for unsupported cmd[35585]
  1392. [ 39.646386] [rev_rmnet5] error: rmnet_ioct called for unsupported cmd[35585]
  1393. [ 39.646599] [rev_rmnet6] error: rmnet_ioct called for unsupported cmd[35585]
  1394. [ 39.646822] [rev_rmnet7] error: rmnet_ioct called for unsupported cmd[35585]
  1395. [ 39.647031] [rev_rmnet8] error: rmnet_ioct called for unsupported cmd[35585]
  1396. [ 42.108050] BMS: adjust_soc: s 35 i -63401 v 3770781 ocv 3784000 rbatt 156 uuc 90120 cc 2031 r 1111480 t 445 f 3004000
  1397. [ 43.149875] audit: audit_lost=1 audit_rate_limit=20 audit_backlog_limit=64
  1398. [ 43.149881] audit: rate limit exceeded
  1399. [ 44.209504] pil-q6v5-mss fc880000.qcom,mss: mba: loading from 0x0d100000 to 0x0d149000
  1400. [ 44.214865] pil_pronto fb21b000.qcom,pronto: wcnss: loading from 0x06e00000 to 0x0742f000
  1401. [ 44.408535] pil-q6v5-mss fc880000.qcom,mss: mba: Brought out of reset
  1402. [ 44.425628] pil-q6v5-mss fc880000.qcom,mss: modem: loading from 0x08000000 to 0x0d100000
  1403. [ 44.774663] QSEECOM: qseecom_load_app: App (keymaste) does'nt exist, loading apps for first time
  1404. [ 44.776116] QSEECOM: qseecom_load_app: App with id 2 (keymaste) now loaded
  1405. [ 45.728822] pil_pronto fb21b000.qcom,pronto: wcnss: Brought out of reset
  1406. [ 46.189832] init: apport-config main process (2925) killed by TERM signal
  1407. [ 46.645663] pil_pronto fb21b000.qcom,pronto: wcnss: Power/Clock ready interrupt received
  1408. [ 46.673550] pil_pronto fb21b000.qcom,pronto: Subsystem error monitoring/handling services are up
  1409. [ 46.679690] diag: In diag_send_msg_mask_update, invalid status 0
  1410. [ 46.679703] diag: In diag_send_log_mask_update, invalid status 0
  1411. [ 46.686810] wcnss_pm_qos_update_request: update request -1
  1412. [ 46.686824] wcnss_pm_qos_remove_request: remove request
  1413. [ 46.710303] adb_open
  1414. [ 46.731990] warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
  1415. [ 46.782508] wcnss_wlan_ctrl_probe: SMD ctrl channel up
  1416. [ 46.784435] wcnss: version 01050102
  1417. [ 46.784449] wcnss: schedule dnld work for pronto
  1418. [ 46.785103] wcnss: build version CNSS-PR-1-4-1-c4-00065
  1419. [ 47.643183] pil-q6v5-mss fc880000.qcom,mss: modem: Brought out of reset
  1420. [ 47.728370] Notify: smsm init
  1421. [ 47.765391] pil-q6v5-mss fc880000.qcom,mss: mba: Power/Clock ready interrupt received
  1422. [ 47.765424] pil-q6v5-mss fc880000.qcom,mss: Subsystem error monitoring/handling services are up
  1423. [ 47.774689] msm_ipc_router_send_control_msg: xprt_info not initialized
  1424. [ 47.783849] msm_ipc_router_send_control_msg: xprt_info not initialized
  1425. [ 47.784345] msm_ipc_router_send_control_msg: xprt_info not initialized
  1426. [ 47.821190] msm_ipc_router_send_control_msg: xprt_info not initialized
  1427. [ 48.194162] apr_tal:Modem Is Up
  1428. [ 48.200657] diag: In diag_send_msg_mask_update, invalid status 0
  1429. [ 48.200670] diag: In diag_send_log_mask_update, invalid status 0
  1430. [ 48.575307] sps:BAM 0xfc834000 is registered.
  1431. [ 48.600359] sps:BAM 0xfc834000 (va:0xc73b0000) enabled: ver:0x20, number of pipes:6
  1432. [ 49.328346] wcnss: NV download
  1433. [ 49.328355] wcnss: Get nv file from wlan/prima/WCNSS_qcom_wlan_nv_x4lte.bin
  1434. [ 49.334413] wcnss: NV bin size: 29812, total_fragments: 10
  1435. [ 49.334445] wcnss: no space available for smd frame
  1436. [ 49.358383] wcnss: no space available for smd frame
  1437. [ 49.388436] wcnss: no space available for smd frame
  1438. [ 49.418451] wcnss: no space available for smd frame
  1439. [ 49.459053] wcnss: not setting up vbatt
  1440. [ 50.036097] dwc3 f9200000.dwc3: Avail curr from USB = 0 type 4
  1441. [ 50.036170] qpnp_chg_iusbmax_set: mA 100
  1442. [ 50.036232] qpnp_chg_chgr_chg_fastchg_irq_handler: FAST_CHG IRQ triggered, fastchg_on: 0
  1443. [ 50.036391] adb_release
  1444. [ 50.036505] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  1445. [ 50.053979] dwc3 f9200000.dwc3: request c2241b00 was not queued to ep0out
  1446. [ 50.054343] mtp_bind_config
  1447. [ 50.086349] BMS: adjust_soc: s 35 i 659539 v 3680046 ocv 3784000 rbatt 156 uuc 90090 cc 2072 r 1111110 t 450 f 3003000
  1448. [ 50.160809] dwc3 f9200000.dwc3: Avail curr from USB = 2 type 4
  1449. [ 50.160823] android_work: android_work: did not send uevent (0 0 (null))
  1450. [ 50.474752] dwc3 f9200000.dwc3: Avail curr from USB = 0 type 4
  1451. [ 50.475623] android_work: android_work: did not send uevent (0 0 (null))
  1452. [ 50.529907] android_work: android_work: did not send uevent (0 0 (null))
  1453. [ 50.586840] android_work: android_work: sent uevent USB_STATE=CONNECTED
  1454. [ 50.592403] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  1455. [ 50.714795] android_work: android_work: sent uevent USB_STATE=CONNECTED
  1456. [ 50.716143] android_usb gadget: high-speed config #1: fe8050c8.android_usb
  1457. [ 50.716239] dwc3 f9200000.dwc3: Avail curr from USB = 500 type 4
  1458. [ 50.716578] qpnp_chg_iusbmax_set: mA 500
  1459. [ 50.716678] qpnp_chg_chgr_chg_fastchg_irq_handler: FAST_CHG IRQ triggered, fastchg_on: 1
  1460. [ 50.716780] qpnp_chg_set_appropriate_battery_current: ibat setting 500 mA
  1461. [ 50.716875] qpnp_chg_vbatdet_lo_irq_handler: vbatdet-lo triggered
  1462. [ 50.716891] qpnp_chg_vbatdet_lo_irq_handler: chg_done chg_sts: 0x20 triggered
  1463. [ 50.755867] BMS: adjust_soc: s 35 i -11517 v 3743853 ocv 3784000 rbatt 156 uuc 90120 cc 2093 r 1111480 t 445 f 3004000
  1464. [ 50.768734] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  1465. [ 56.808353] wcnss_post_bootup: Cancel APPS vote for Iris & WCNSS
  1466. [ 62.107753] BMS: adjust_soc: s 35 i 52401 v 3763170 ocv 3784000 rbatt 156 uuc 90120 cc 2048 r 1111480 t 444 f 3004000
  1467. [ 69.593268] mdss_dsi_on+: ctrl=f0706810 ndx=0
  1468. [ 69.593274] mdss_dsi_panel_pon: Need not pon
  1469. [ 69.678331] mdss_dsi_panel_reset: enable = 1
  1470. [ 69.741337] mdss_dsi_unblank+:
  1471. [ 69.741343] mdss_dsi_panel_on: ctrl=f0706810 ndx=0
  1472. [ 69.978994] mdss_dsi_panel_on:-
  1473. [ 69.981586] mdss_dsi_unblank-:
  1474. [ 69.984018] atmel_mxt_ts_640t 2-004b: ##### UNBLANK SCREEN #####
  1475. [ 70.025970] atmel_mxt_ts_640t 2-004b: ##### UNBLANK SCREEN #####
  1476. [ 70.190362] systemd-logind[1814]: Failed to start user service: Unknown unit: user@32011.service
  1477. [ 70.213619] systemd-logind[1814]: New session c2 of user phablet.
  1478. [ 70.717822] qpnp_chg_thermal_monitor_work: temp 446 lvl 6 6
  1479. [ 70.793538] dwc3 f9200000.dwc3: Avail curr from USB = 0 type 4
  1480. [ 70.793615] qpnp_chg_iusbmax_set: mA 100
  1481. [ 70.793678] qpnp_chg_chgr_chg_fastchg_irq_handler: FAST_CHG IRQ triggered, fastchg_on: 0
  1482. [ 70.793897] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  1483. [ 70.818625] adb_release: 1 callbacks suppressed
  1484. [ 70.818630] adb_release
  1485. [ 70.818686] adb_open: 2 callbacks suppressed
  1486. [ 70.818690] adb_open
  1487. [ 70.851879] BMS: adjust_soc: s 35 i 671057 v 3671556 ocv 3784000 rbatt 156 uuc 90090 cc 1900 r 1111110 t 451 f 3003000
  1488. [ 70.954955] android_work: android_work: sent uevent USB_STATE=CONNECTED
  1489. [ 70.959116] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  1490. [ 71.082591] android_work: android_work: sent uevent USB_STATE=CONNECTED
  1491. [ 71.083272] android_usb gadget: high-speed config #1: fe8050c8.android_usb
  1492. [ 71.083372] dwc3 f9200000.dwc3: Avail curr from USB = 500 type 4
  1493. [ 71.083850] qpnp_chg_iusbmax_set: mA 500
  1494. [ 71.083941] qpnp_chg_chgr_chg_fastchg_irq_handler: FAST_CHG IRQ triggered, fastchg_on: 1
  1495. [ 71.084044] qpnp_chg_set_appropriate_battery_current: ibat setting 500 mA
  1496. [ 71.084138] qpnp_chg_vbatdet_lo_irq_handler: vbatdet-lo triggered
  1497. [ 71.084154] qpnp_chg_vbatdet_lo_irq_handler: chg_done chg_sts: 0x20 triggered
  1498. [ 71.132351] BMS: adjust_soc: s 35 i 44308 v 3737121 ocv 3784000 rbatt 156 uuc 90120 cc 1952 r 1111480 t 446 f 3004000
  1499. [ 71.138558] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  1500. [ 73.550156] msm_routing_get_dolby_dap_param_to_get_control, port_id not set, returning error
  1501. [ 73.550285] msm_pcm_volume_ctl_get substream runtime not found
  1502. [ 73.550335] msm_pcm_volume_ctl_get substream runtime not found
  1503. [ 73.550457] msm_pcm_volume_ctl_get substream runtime not found
  1504. [ 73.550652] msm_pcm_volume_ctl_get substream runtime not found
  1505. [ 73.595486] Listen 6 Audio Service: asoc: Listen 6 Audio Service no valid capture route from source to sink
  1506. [ 73.598374] q6asm_callback: cmd = 0x10bcd returned error = 0x5
  1507. [ 73.603209] Listen 6 Audio Service: asoc: Listen 6 Audio Service no valid capture route from source to sink
  1508. [ 73.604952] q6asm_callback: cmd = 0x10bcd returned error = 0x5
  1509. [ 73.612335] q6asm_callback: cmd = 0x10bcd returned error = 0x5
  1510. [ 73.621305] MSM8974 LowLatency: asoc: MSM8974 LowLatency no valid capture route from source to sink
  1511. [ 73.645104] Listen 6 Audio Service: asoc: Listen 6 Audio Service no valid capture route from source to sink
  1512. [ 74.182789] init: lightdm post-start process (3805) terminated with status 1
  1513. [ 75.220968] init: force-mtp main process (4133) terminated with status 1
  1514. [ 75.243754] init: lxc-android-config post-start process (1209) terminated with status 1
  1515. [ 78.840569] event_handler: reclaimed all bufs
  1516. [ 82.097206] BMS: adjust_soc: s 35 i 310676 v 3715752 ocv 3784000 rbatt 156 uuc 90090 cc 2916 r 1111110 t 448 f 3003000
  1517. [ 82.981852] audit: audit_lost=38 audit_rate_limit=20 audit_backlog_limit=64
  1518. [ 82.981858] audit: rate limit exceeded
  1519. [ 91.085099] qpnp_chg_thermal_monitor_work: temp 446 lvl 6 6
  1520. [ 102.097892] BMS: adjust_soc: s 35 i 323336 v 3718974 ocv 3784000 rbatt 156 uuc 90120 cc 3731 r 1111480 t 446 f 3004000
  1521. [ 108.740357] mtp_open
  1522. [ 108.859317] mtp_release
  1523. [ 111.086100] qpnp_chg_thermal_monitor_work: temp 448 lvl 6 6
  1524. [ 120.630349] mtp_open
  1525. [ 120.756416] mtp_release
  1526. [ 122.097305] BMS: adjust_soc: s 35 i 152743 v 3733608 ocv 3784000 rbatt 156 uuc 90120 cc 5083 r 1111480 t 446 f 3004000
  1527. [ 124.313671] qcom,leds-qpnp leds-qpnp-f0574c00: bl: change to lower light 161
  1528. [ 124.313723] qcom,leds-qpnp leds-qpnp-f0574c00: bl: change to digital 161
  1529. [ 131.087014] qpnp_chg_thermal_monitor_work: temp 447 lvl 6 6
  1530. [ 132.009549] mtp_open
  1531. [ 132.135005] mtp_release
  1532. [ 134.411825] mdss_dsi_blank+:
  1533. [ 134.414599] mdss_dsi_panel_off: ctrl=f0706810 ndx=0
  1534. [ 134.590418] mdss_dsi_dcs_read_cb: 0x8.
  1535. [ 134.590496] mdss_dsi_panel_off:-
  1536. [ 134.590499] mdss_dsi_blank-:End
  1537. [ 134.592228] mdss_dsi_panel_power_on: enable=0
  1538. [ 134.592232] mdss_dsi_panel_reset: enable = 0
  1539. [ 134.651662] mdss_dsi_panel_pon: Need not pon
  1540. [ 134.652898] atmel_mxt_ts_640t 2-004b: ##### BLANK SCREEN #####
  1541. [ 142.112842] BMS: adjust_soc: s 35 i 191967 v 3747072 ocv 3784000 rbatt 156 uuc 90120 cc 5576 r 1111480 t 446 f 3004000
  1542. [ 142.892329] mtp_open
  1543. [ 142.945655] mtp_release
  1544. [ 151.087963] qpnp_chg_thermal_monitor_work: temp 444 lvl 6 6
  1545. [ 153.489467] mtp_open
  1546. [ 153.582646] mtp_release
  1547. [ 162.108450] BMS: adjust_soc: s 35 i -5706 v 3770193 ocv 3784000 rbatt 156 uuc 90120 cc 5344 r 1111480 t 444 f 3004000
  1548. [ 164.520536] mtp_open
  1549. [ 164.626551] mtp_release
  1550. [ 167.664203] init: apport-config main process (10038) killed by TERM signal
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!